TLED110a
DESCRIPTION
The TLED110A series decorative trapezoid wallpack’s architectural design combined with a high performance LED light source makes it an attractive and smart choice. Constructed of die-cast aluminum, the TLED110A uses a UV resistant powder coated finish to protect against the elements and is
UL listed for wet locations. The TLED110A incorporates contractor friendly features that allow for ease of installation including a hinged design for easy access and the EZ-LITE quick mounting system which fits standard junction boxes. Available in 30 or 48 watts, the TLED110A provides a wide spectrum of application options for schools, office complexes, light commercial, apartments and recreational facilities.
SPECIFICATIONS
Construction:
Precision molded die-cast aluminum housing with hinged front frame and clear, tempered glass lens offers durable performance and clean aesthetics.
Fixture is completely sealed and gasketed, UL listed for Wet Locations with corrosion resistant, stainless steel captive fasteners and a clear tempered glass lens to protect the LED light engine. The TLED110A also incorporates a UV resistant, long lasting powder coated finish.
Optics:
The TLED110A series decorative trapezoid wallpack delivers exceptional light quality, efficiency and light distribution. The 30 and 48 watt LED light engines powered by constant current control drivers provide 50,000 hour rated life, 70% lumen maintenance, a 5100K CCT and a CRI of ≥85. A low
LED thermal junction (Tj) of 70°C (158°F) at a design ambient of 25°C (77°F) supports long life and low lumen depreciation.
Electrical:
The TLED110A series operates from 120VAC to 277VAC, 347VAC or
480VAC, 50/60Hz with an auto-ranging voltage controlled circuit and simple two (2) wire input. The TLED110A is suitable for operation in -30°C (-22°F) to 40°C (104°F) ambient conditions. Optional transient surge protection is available.
Thermal Management:
LED light engines and drivers are securely mounted directly to the finned aluminum heat sink and the die-cast aluminum housing, respectively, optimizing thermal management. LEDLITElogic heat sinking technology moves heat away from the LEDs maximizing system performance and delivering 50,000+ hour life with >70% lumen maintenance.
Environmentally Friendly Design:
TLED110A luminaires consume very little energy and provide long life in comparison to traditional lamp technologies. Our manufacturing process utilizes no harmful chemicals such as mercury or lead and the LED light engines emit an extremely low UV and minimal heat. The compact design allows for the use of fewer materials and is recyclable, resulting in less overall waste.
Installation:
The TLED110A series easily mounts to any vertical surface and features our EZ-LITE gasketed steel mounting plate with built-in bubble level easily attaches to a 3” or 4” j-box. The fixture is then secured to EZ-LITE mounting plate with two (2) Allen head screws.
Emergency Backup (Option: EM):
The Trace-lite TLED110A series is available with an optional Emergency
Backup, to provide emergency egress lighting when AC power fails. The
“EM” emergency ballast option will provide battery back-up for a full 90 minutes. Available on 48 watt unit only, utilizes 30 LEDs operating in normal conditions and 18 LEDs operating in emergency mode.
Transient Protection System (Option: TP):
The LEDLITE logic optional transient protection device is designed to be used in conjunction with our LED drivers. The “-TP” option utilizes a 3-leaded device that protects Line-Ground, Line-Neutral, and Neutral-Ground in accordance with IEEE/ANSI C62.41.2 guidelines. The surge current rating of the “-TP” option is 10,000 amps.
SPECIFICATIONS ARE SUBJECT
TO CHANGE WITHOUT NOTICE
Photocontrol (Option: PC):
Optional photocontrol provides dusk-till-dawn security. Input voltage must be specified to match fixture input voltage.
IESNA LM-79 and LM-80:
The TLED110A is evaluated in accordance with the parameters outlined and reported by LM-79 and LM-80 documents.
Listing:
UL Listed for wet locations.
Warranty:
Any component that fails due to manufacturer’s defect is guaranteed for
5 years. The warranty does not cover physical damage, abuse or acts of
God. Manufacturer reserves the right to charge for such repairs if deemed necessary.
10800163 08/12

Part Number
TLED110A-30
TLED110A-48
Lumens
3000
5000
Lumens Per
Watt (LPW)
100
104
Nominal LED
Wattage
30
48
NOTE: Lumen maintenance and life (part of LM-80 data) are per published information from primary LED suppliers and is based on design operation at their specified thermal management and electrical design parameters.
Example: TLED110A-30-DT-TP
Series Total Watts
TLED110A 30 = 30 Watts
48 = 48 Watts
Input Voltage
DT = 120/277VAC
347 1 = 347VAC
480 1 = 480VAC
1 Includes step-down transformer
2 48 watt unit only
3 Consult factory for specific part number and details
4 Order as separate line item
Options (Factory Installed)
TP = Transient Protection System
EM 2 = Emergency Backup
CC 3 = Custom Color
Accessories 4 (Field Installed)
PC1 = 120VAC Photocontrol
PC2 = 208-277VAC Photocontrol
1911 W. Parkside Lane • Phoenix, AZ 85027
(800) 533-3948 • Fax: (623) 580-8948