Haltech Engine Management Systems
(A division of Lockin P/L, A.B.N. 68 061 744 303)
3 Centre Place, Wetherill Park NSW 2164 Australia
T: 02 9729 0999
F: 02 9729 0900
sales@haltech.com www.haltech.com
Updated 1st Sept 2015
UNIVERSAL WIRE-IN ECU KITS
Part #
HT-050702
HT-050902
HT-051301
HT-051302
HT-051401
HT-051402
Inc.GST
R.R.P
Platinum Sprint 500 Autospec Universal Wire-in Harness Kit Long
1189.00
2.5m/8ft (includes CD and USB coms cable)
Platinum Sprint RE Autospec Universal Wire-in Harness Kit Long
1189.00
2.5m/8ft (includes CD and USB coms cable)
Platinum Sport 1000 Autospec Universal Wire-in Harness Kit Short
1935.00
1.2m/4ft (includes CD and USB coms cable)
Platinum Sport 1000 Autospec Universal Wire-in Harness Kit Long
2.5m/8ft with 6 circuit Haltech fuse box with lid. Includes fuses, 4 relays and pins to use the spare 2 circuits (includes CD and USB coms cable)
Platinum Sport 2000 Autospec Universal Wire-in Harness Kit Short
1995.00
2435.00
1.2m/4ft (includes CD and USB coms cable)
Platinum Sport 2000 Autospec Universal Wire-in Harness Kit Long
2.5m/8ft with 6 circuit Haltech fuse box with lid. Includes fuses, 4 relays and pins to use the spare 2 circuits (includes CD and USB coms cable)
2495.00
HT-150901
Elite 1500 (DBW) - 1.2m (4 ft) Basic Universal Wire-in Harness Kit
(no relays or fuses) - includes USB Software Key and USB programming cable
2245.00 NEW PRODUCT
HT-150904
Elite 1500 (DBW) - 2.5m (8 ft) Premium Universal Wire-in Harness Kit
Includes firewall grommet, moulded 6 power circuit Haltech fuse box & lid. Includes 4 relays & 7 fuses.
(includes pins for the 2 spare power circuits, USB Software Key and USB programming cable)
2395.00 NEW PRODUCT
HT-151301
Elite 2500 (DBW) - 1.2m (4 ft) Basic Universal Wire-in Harness Kit
(no relays or fuses) - includes USB Software Key and USB programming cable
2845.00 NEW PRODUCT
HT-151304
Elite 2500 (DBW) - 2.5m (8 ft) Premium Universal Wire-in Kit
Includes firewall grommet, moulded 6 power circuit Haltech fuse box & lid. Includes 4 relays & 7 fuses.
(includes pins for the 2 spare power circuits, USB Software Key and USB programming cable)
2995.00 NEW PRODUCT
HT-070004
Water proof Elite USB Cap Only (Supplied as a pair)
15.00 NEW PRODUCT
HT-070002
Water proof Elite USB Connection Cable -2.4m/8ft - Type B for communication
(includes waterproof cap)
60.00 NEW PRODUCT
HT-039000
Platinum ECU Rail-type mounts and screws - (Pack of 4 suits all silver extrusions))
15.00
ECU ACCESSORIES
UNIVERSAL ECU ONLY
HT-050700
Platinum Sprint 500 ECU Only (includes CD and USB coms cable)
HT-050900
Platinum Sprint RE ECU Only (includes CD and USB coms cable)
999.00
HT-051300
Platinum Sport 1000 ECU Only (includes CD and USB coms cable)
1595.00
HT-051400
Platinum Sport 2000 ECU Only (includes CD and USB coms cable)
2095.00
HT-150900
Elite 1500 (DBW) - ECU Only (includes USB Software Key and USB programming cable)
1995.00 NEW PRODUCT
HT-151300
Elite 2500 (DBW) - ECU Only (includes USB Software Key and USB programming cable)
2595.00 NEW PRODUCT
999.00
Platinum PRO Direct Plug-in ECU Kits
Auxiliary I/O Harness Plug and Pins are now included in all direct plug-in kits
Platinum Sport Direct Plug-in GM Kit
HT-051100
HT-055001
HT-055105
HT-055006
HT-055007
HT-055012
Australian Market: all VN-VP & VR-VS Manual trans only with DELCO ECU
US Domestic Market: early GM TBI/TPI with DELCO ECU
Camaro, Firebird, Corvette 86-89 (V8 TBI & TPI)
Chev truck/van & S10 (all TBI & TPI)
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
1595.00
Platinum PRO Direct Plug-in Nissan R32/33 Skyline Kit (Manual trans only)
2095.00
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in Nissan R34 GT-T Skyline Kit (Manual trans only)
2095.00
(DIRECTLY ACCEPTS AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in Nissan R34 (GTR ONLY) Skyline Kit
2295.00
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in Nissan Z32 Fairlady 300ZX Kit (Manual trans only)
2095.00
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in Nissan S15 Silvia/200SX
& S14s2, S13 Type-X Kouki 8/96-98 (Manual trans only)
2095.00
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
HT-055014
HT-055016
Platinum PRO Direct Plug-in Nissan Y61 Patrol (TB48) Kit (Manual trans only)
2295.00
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in Nissan Z33 350Z DBW Kit (Does not suit HR Dual Throttle)
(Manual trans only)
2795.00
(DIRECTLY ACCEPTS AN INPUT FROM A FLEX FUEL SENSOR)
HT-055064
HT-055047
HT-055048
HT-055050
HT-055174
Platinum PRO Direct Plug-in Mitsubishi EVO 9 MIVEC Kit - also suits JDM EVO 8 MR (6-spd)
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in Honda EP3 Kit (Manual trans only) - also suits DC5 (03-04)
2095.00
1895.00
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in Honda DC5/RSX Kit (2005-06) (Non DBW, Manual trans only)
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in Honda S2000 AP1 Kit (2000-2004 & 2005 AP2 (Non DBW)
1895.00
1895.00
(REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Direct Plug-in - Subaru GDB WRX MY01-05 JDM, USDM,
ADM & STI MY01-05 JDM, ADM (EJ20 Non DBW, Manual trans only)
2095.00
(DIRECTLY ACCEPTS AN INPUT FROM A FLEX FUEL SENSOR)
Platinum PRO Auxiliary I/O Harness Parts
HT-030006
Plug and Pins Only - 16 Pin TYCO - Suit PRO/Sport Plug-in Aux harn & TCA Box
HT-040003
Platinum PRO/Sport Plug-in Auxiliary I/O Harness Only - 2.5m/8ft
40.00
139.00
Page 1 of 9
Platinum Sport 1000 Terminated Engine Harness ECU Kits
The fastest and most cost effective way to wire your racecar or engine conversion
HT-051202
PS1000 Mazda 13B Terminated Harness Kit
Includes flying lead ignition harness. Suits Square Bosch EV1 injector connectors.
2399.00
HT-051203
PS1000 Mazda 13B Terminated Harness Kit
Includes pre-wired LS1 ignition coil harness. Suits Square Bosch EV1 injector connectors.
(LS1 ignition coils are NOT included. Please order 4 x HT-020102 if required)
2449.00
HT-051204
PS1000 Mazda 13B Terminated Harness Kit
Includes pre-wired HPI4 15AMP 4CH Ignition Module with flying lead ignition harness.
Suits Square Bosch EV1 injector connectors.
(Ignition coils are NOT included. Please order 4 x HT-020110 if required)
2699.00
Platinum Sport 2000 Terminated Engine Harness ECU Kits
The fastest and most cost effective way to wire your racecar or engine conversion
HT-051476
PS2000 FORD 89-95 5.0 Terminated Full Sequential Harness Kit
Suits Square Bosch EV1 injector connectors - Includes PS2000 ECU, Engine Harness, & Fuse Block Kit. Full Sequential Injection Pre-wired to connect directly to OEM TFI Module,
Includes breakouts for Distributor or Crank Sensor Trigger
(Use with OEM TFI Ignition or CDI MSD6, MSD7, Crane, Mallory etc)
2999.00
HT-051412
PS2000 Nissan RB30 Single Cam Terminated Harness Kit
Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit.
Pre-wired to connect directly to the supplied LS1 ignition coil with billet mounting bracket. Includes air & coolant temp sensors.
(Can be reconfigured to run 6 individual ignition coils using HT-045604)
3099.00
HT-045504
PS2000 Nissan RB30 6 Channel Flying Lead Ignition Harness
Used to expand to 6 individual ignition coils.
139.00
(Coils and plugs are NOT included)
HT-051462
PS2000 Toyota 2JZ Terminated Harness Kit
Includes pre-wired HPI6 15AMP 6CH Ignition Module with factory coil ignition harness.
Suits Square Bosch EV1 injector connectors.
3549.00
HT-051464
PS2000 Toyota 2JZ Terminated Harness Kit
Includes pre-wired M&W Pro-16b 6-wire CDI with factory coil ignition harness.
Suits Square Bosch EV1 injector connectors.
4369.00
HT-051455
PS2000 GM GEN III LS1 & LS6 Non DBW Terminated Harness Kit
Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit.
Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector.
(Ignition coils and harnesses are NOT included)
2999.00
HT-045657
GM GEN III LS1 & LS6 Terminated Ignition Harness Kit
Includes Bank 1 & 2 Coil Harness (Pre-wired to connect LS1 Ignition coils to OEM 7 Pin Coil Harness Connector)
HT-051457
PS2000 GM GEN IV LS2 & LS3 Non DBW Terminated Harness Kit
* Requires retrofit of cable operated throttle body
Suits Square Bosch EV1 injector connectors. Includes ECU, Engine Harness,
& Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector.
(Ignition coils and harnesses are NOT included)
2999.00
HT-051459
PS2000 GM GEN IV LS2 & LS3 Non DBW Terminated Harness Kit
* Requires retrofit of cable operated throttle body
Suits factory EV6 injector connectors. Includes ECU, Engine Harness, & Fuse Block Kit.
Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector.
(Ignition coils and harnesses are NOT included)
2999.00
199.00
Elite 2500 Terminated Engine Harness ECU Kits
The fastest and most cost effective way to wire your racecar or engine conversion
HT-151380
Elite 2500 Ford Coyote 5.0 Terminated Harness Kit
Suits EV1 injector connectors & Early Style Cam Solenoid - Small single offset keyed connector
Supports DBW and Quad Cam Timing, kit includes HPI8 15amp high power ignition module
*Requires modification for fitment to supercharged Cobra Jet version.
4495.00 NEW PRODUCT
HT-151381
Elite 2500 Ford Coyote 5.0 Terminated Harness Kit
Suits factory injector connectors & Early Style Cam Solenoid - Small single offset keyed connector
Supports DBW and Quad Cam Timing, kit includes HPI8 15amp high power ignition module
*Requires modification for fitment to supercharged Cobra Jet version.
4495.00 NEW PRODUCT
HT-151367
Elite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Kit
Suits factory EV6 injector connectors - Includes ECU, Engine Harness, & Fuse Block Kit.
Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector
(Ignition coils and harnesses are NOT included)
3595.00 NEW PRODUCT
Platinum Sport 1000 Plug 'n' Play Adaptor Harness Kits
ALL PS1000 PLUG 'N' PLAY ADAPTOR KITS INCLUDE AN AIR TEMP SENSOR, PLUG AND PINS
HT-051310
PS1000 Plug 'n' Play Adaptor Harness Kit Kit - Nissan N14 GTIR (90-95)
1995.00
HT-051311
PS1000 Plug 'n' Play Adaptor Harness Kit - Nissan S13 CA18
1995.00
HT-051312
PS1000 Plug 'n' Play Adaptor Harness Kit - Nissan S13 SR20 DET
1995.00
HT-051313
PS1000 Plug 'n' Play Adaptor Harness Kit - Nissan S14s1 "Zenki"
1995.00
HT-051320
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda RX7 FC3S-S4
1995.00
HT-051321
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda RX7 FC3S-S5
1995.00
HT-051322
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda RX7 FD3S-S6 (92-95)
(2 row ECU plug - Single turbo conversion only)
1995.00
HT-051329
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda RX7 FD3S-S7&8 (96-02)
(4 row ECU plug - Single turbo conversion only)
1995.00
HT-051319
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda MX5 NB 1.8 SP FACTORY TURBO
(3 Plug/3 Row ECU)
1995.00
HT-051323
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda MX5 NA 1.6
(2 Plug ECU)
1995.00
HT-051324
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda MX5 NA 1.8
(2 Plug ECU)
1995.00
HT-051325
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda MX5 NB 1.8
(99 Model - 3 Plug/2 Row ECU)
1995.00
HT-051326
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda MX5 NA 1.8 Special & Anniversary Models
(3 Plug ECU)
1995.00
HT-051327
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda MX5 NB 1.8 Non VCT 00-04 Model
(3 Plug/3 Row ECU)
1995.00
HT-051328
PS1000 Plug 'n' Play Adaptor Harness Kit - Mazda MX5 NB 1.8 VCT
(00-04 Model - 3 Plug/3 Row ECU)
1995.00
HT-051332
PS1000 Plug 'n' Play Adaptor Harness Kit - Honda OBD-1
1995.00
HT-051340
PS1000 Plug 'n' Play Adaptor Harness Kit - EVO 1,2,3,GSR and RVR
1995.00
HT-051341
PS1000 Plug 'n' Play Adaptor Harness Kit - EVO 4,5,6 and Mitsubishi 2G DSM (95-99)
1995.00
HT-051342
PS1000 Plug 'n' Play Adaptor Harness Kit - EVO 6.5
1995.00
HT-051347
PS1000 Plug 'n' Play Adaptor Harness Kit - EVO 7 (Manual transmission only)
1995.00
HT-051344
PS1000 Plug 'n' Play Adaptor Harness Kit - EVO 8 (5-speed)
1995.00
HT-051343
PS1000 Plug 'n' Play Adaptor Harness Kit - Mitsubishi Galant VR4/1G DSM (89-94)
1995.00
HT-051350
PS1000 Plug 'n' Play Adaptor Harness Kit - Subaru RS Liberty & WRX MY93-96
1995.00
HT-051352
PS1000 Plug 'n' Play Adaptor Harness Kit - Subaru WRX MY97-98
1995.00
HT-051353
PS1000 Plug 'n' Play Adaptor Harness Kit - Subaru WRX MY99-00
1995.00
HT-051360
PS1000 Plug 'n' Play Adaptor Harness Kit - Toyota Celica GT-FOUR ST185 (3S-GTE)
1995.00
Page 2 of 9
Platinum Sport 2000 Plug 'n' Play Adaptor Harness Kits
ALL PS2000 PLUG "'N' PLAY ADAPTOR KITS INCLUDE AN AIR TEMP SENSOR, PLUG AND PINS
HT-051470
PS2000 Plug 'n' Play Adaptor Harness Kit - Ford Mustang 89-93
(V8 5.0/5.8L)
2495.00
HT-051471
PS2000 Plug 'n' Play Adaptor Harness Kit - Ford Mustang 94-95
(V8 5.0/5.8L, Manual trans only)
2495.00
HT-051460
PS2000 Plug 'n' Play Adaptor Harness Kit - Toyota Supra JZA80 2JZ
(Manual transmission only)
2495.00
Elite 1500 Plug 'n' Play Adaptor Kits
HT-150980
Elite 1500 Plug 'n' Play Adaptor Harness ECU Kit - Yamaha WaveRunner
FX, FZS, FZR 2008-2014 Includes Mounting Bracket, Waterproof CAN USB Extension, USB Software Key and USB programming cable
HT-010730
Yamaha WaveRunner FX, FZS, FZR 2008-2012? WBC1 - Single Channel CAN O2 Wideband Controller Kit Includes Terminated wiring harness, Elite CAN cable, one Sensor
and Early Style 1" Thread O2 Sensor Adaptor
2495.00 NEW PRODUCT
489.00 NEW PRODUCT
RACEPAK DASHES, DATA & POWER CONTROL MODULES - CONTACT US FOR A FULL LIST OF AVAILABLE CABLES, SENSORS AND ACCESSORIES
Please note: To ensure our RRP is kept as low as possible and dealer margins as high as possible, all sales of Dashes, Dataloggers, Power Control Modules and Racepak Sensors are final.
No returns for credit or refund are accepted.
POWER CONTROL MODULES
HT-06-500-KT-SW30
SmartWire Kit - 30 output channels in total.
8 channels @ 20 amp max, 22 channels @ 10 amp max & 12 hardwired switch input channels.
Kit includes SmartWire module, connector kit, software and USB programming cable.
3099.00
(Requires additional cabling and/or an external CAN Interface Module to read VNET Sensors and/or ECU information)
HT-06-500-SW-PNL8
HT-06-500-SW-SM16
SmartWire Switch Panel - Optional Aluminium Switch Panel - 8 input channels via 7 rocker switches and 1 push button
(Requires additional cabling for connection)
SmartWire Switch Module - Optional Aluminium Switch Module - 16 input channels to integrate your existing switches via screw terminal block
(Requires additional cabling for connection)
549.00
549.00
POWER CONTROL MODULE CABLES AND ACCESSORIES
HT-06-280-CA-VM-TCAPF
VNET Terminator Cap - FEMALE
HT-06-280-CA-VM-TCAPM
VNET Terminator Cap - MALE
29.00
29.00
HT-06-280-CA-DM-T009
DUAL CAN CABLE, 7 PIN VNET TEE CONNECTOR 9"
(required if using VNET Modules and a HALTECH IQ3 Dash with a HALTECH ECU)
109.00
HT-06-280-CA-DM-T024
DUAL CAN CABLE, 7PIN VNET TEE CONNECTOR 24"
(required if using VNET Modules and a HALTECH IQ3 Dash with a HALTECH ECU)
109.00
HT-06-230-VM-EFIHAL
HT-06-230-VM-EFIHAL2
Haltech External EFI CAN to VNET Interface Module
690.00
(Only required if not using in conjunction with a Haltech IQ3 Dash)
Haltech Version 2 External EFI CAN to VNET Interface Module
575.00
(Only required if not using in conjunction with a Haltech IQ3 Dash)
HT-06-500-MB-SP1500
SmartWire Switch Panel Rollcage Tube Mount - suit 1.500” dia tubing
145.00
HT-06-500-MB-SP1625
SmartWire Switch Panel Rollcage Tube Mount - suit 1.625” dia tubing
145.00
HT-06-500-MB-SP1750
SmartWire Switch Panel Rollcage Tube Mount - suit 1.750” dia tubing
145.00
HT-06-280-CA-BN-T09
SmartWire to VNET cable assembly - 6in/150mm
109.00
HT-06-280-CA-BN-T18
SmartWire to VNET cable assembly - 18in/450mm
109.00
HT-06-280-CA-BN-T36
SmartWire to VNET cable assembly - 3ft/900mm
109.00
HT-06-580-CA-BN-006
SmartWire to switch panel/module connection cable assembly - 6in/150mm
115.00
HT-06-580-CA-BN-012
SmartWire to switch panel/module connection cable assembly - 12in/300mm
115.00
HT-06-580-CA-BN-018
SmartWire to switch panel/module connection cable assembly - 18in/450mm
115.00
HT-06-580-CA-BN-024
SmartWire to switch panel/module connection cable assembly - 2ft/600mm
115.00
HT-06-580-CA-BN-036
SmartWire to switch panel/module connection cable assembly - 3ft/900mm
115.00
HT-06-580-CA-BN-048
SmartWire to switch panel/module connection cable assembly - 4ft/1.2m
115.00
HT-06-580-CA-BN-060
SmartWire to switch panel/module connection cable assembly - 5ft/1.5m
115.00
HT-06-580-CA-BN-072
SmartWire to switch panel/module connection cable assembly - 6ft/1.8m
115.00
HT-06-580-CA-BN-084
SmartWire to switch panel/module connection cable assembly - 7ft/2.1m
115.00
HT-06-580-CA-BN-096
SmartWire to switch panel/module connection cable assembly - 8ft/2.4m
115.00
HT-06-580-CA-BN-108
SmartWire to switch panel/module connection cable assembly - 9ft/2.7m
HT-06-580-CA-BN-120
SmartWire to switch panel/module connection cable assembly - 10ft/3.0m
115.00
115.00
HALTECH/RACEPAK DASHES
HT-060100
HT-060101
HALTECH IQ3 Display Dash - Reads Vnet Sensors and includes Internal CAN Interface Module to read Haltech ECU info/sensors
(NO DIRECT TACHO INPUT FOR A STAND ALONE INSTALL)
HALTECH IQ3 4Gb GPS/G-meter Logger Dash - Reads Vnet Sensors and includes Internal CAN Interface Module to read Haltech ECU info/sensors
(INCLUDES DIRECT TACHO INPUT FOR A STAND ALONE INSTALL)
1265.00
2645.00
HT-06-250-DS-IQ3CVR
IQ3 Dash Clip on clear plastic cover - Great for Bikes and Off-road Buggies etc
149.00
HT-06-800-MB-IQ3-PAL
IQ3 Dash Moulded Panel Mount 20" x 10" / 500mm x 250mm - Brushed Silver
195.00
HT-06-800-MB-IQ3-PBLK
IQ3 Dash Moulded Panel Mount 20" x 10" / 500mm x 250mm - Textured Black
175.00
HT-06-800-MB-IQ3-PCF
IQ3 Dash Moulded Panel Mount 20" x 10" / 500mm x 250mm - Faux Carbon Fibre Look
215.00
HT-06-800-MB-IQ3
IQ3 Dash Mounting Bracket - Black anodized aluminium
80.00
ECU/DASH/CAN WIDEBAND PACKAGES
Buy any Elite, Sport or Pro ECU, a single or dual CAN Wideband kit and either a Haltech IQ3 Display or Logger Dash and receive a free CAN Hub-Mini to connect it all together!
Page 3 of 9
CAN Expansion Products
CAN VIDEO ADAPTORS
HT-061000
gaugeART CAN to VGA video Gauge Adapter - Suits Haltech Version 2 CAN bus protocol
919.00 NEW PRODUCT
IO 12 Expander Box - 12 Channel
4 Digital Pulsed Inputs (DPI) - 4 Analogue Voltage Inputs (AVI) - 4 Digital Pulsed Outputs (DPO)
HT-059900
HT-059901
HT-059902
HT-059903
HT-059904
HT-059905
IO 12 Expander Box A - CAN Based 12 Channel - ECU Only
449.00
(includes Black 600mm CAN Cable)
IO 12 Expander Box B - CAN Based 12 Channel - ECU Only
449.00
(includes Black 600mm CAN Cable)
IO 12 Expander Box A - CAN Based 12 Channel inc Plug & Pins
499.00
(includes Black 600mm CAN Cable)
IO 12 Expander Box B - CAN Based 12 Channel inc Plug & Pins
499.00
(includes Black 600mm CAN Cable)
IO 12 Expander Box A - CAN Based 12 Channel inc Flying Lead Harness 2.5m
599.00
(includes Black 600mm CAN Cable)
IO 12 Expander Box B - CAN Based 12 Channel inc Flying Lead Harness 2.5m
599.00
(includes Black 600mm CAN Cable)
HT-030007
Plug and Pins Only - 24 Pin TYCO - Suit IO12 Box, WB1, WB2 & Emulator
HT-049902
IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only - (Suits A or B Box)
60.00
169.00
CAN HUB
HT-059991
CAN HUB-Mini 3 Port - for use with up to two CAN devices (includes 1 x White 300mm/12" CAN cable)
HT-059990
CAN HUB 6 Port - for use with up to five CAN devices (includes 4 x White 300mm/12" CAN cables)
89.00
199.00
CAN EXPANSION CABLES
HT-135000
Haltech Elite DTM4 CAN to OBDII (Vehicle side) Cable 2m (6Ft)
49.00 NEW PRODUCT
HT-130004
Haltech Elite DTM4 CAN Cable Black 300mm
49.00 NEW PRODUCT
HT-130006
Haltech Elite DTM4 CAN Cable Black 600mm
49.00 NEW PRODUCT
HT-130100
Haltech Elite DTM4 CAN Cable Black 1200mm
59.00 NEW PRODUCT
HT-040050
Haltech CAN Cable Black 75mm
39.00
HT-040051
Haltech CAN Cable White 75mm
39.00
HT-040052
Haltech CAN Cable Black 150mm
39.00
HT-040053
Haltech CAN Cable White 150mm
39.00
HT-040054
Haltech CAN Cable Black 300mm
39.00
HT-040055
Haltech CAN Cable White 300mm
39.00
HT-040056
Haltech CAN Cable Black 600mm
39.00
HT-040057
Haltech CAN Cable White 600mm
39.00
HT-040058
Haltech CAN Cable Black 900mm
49.00
HT-040059
Haltech CAN Cable White 900mm
49.00
HT-040060
Haltech CAN Cable Black 1200mm
49.00
HT-040061
Haltech CAN Cable White 1200mm
49.00
HT-040062
Haltech CAN Cable Black 1800mm
49.00
HT-040063
Haltech CAN Cable White 1800mm
49.00
HT-040064
Haltech CAN Cable Black 2400mm
59.00
HT-040065
Haltech CAN Cable White 2400mm
59.00
HT-040066
Haltech CAN Cable Black 3000mm
59.00
HT-040067
Haltech CAN Cable White 3000mm
59.00
HT-040068
Haltech CAN Cable Black 3600mm
59.00
HT-040069
Haltech CAN Cable White 3600mm
59.00
Universal Wire-in ECU Harnesses
HT-040702
PS500 Autospec Universal Wire-in Harness Only - Long - 2.5m/8ft
330.00
HT-040902
PSRE Autospec Universal Wire-in Harness Only - Long - 2.5m/8ft
330.00
HT-041301
PS1000 Autospec Universal Wire-in Harness Only - Short - 1.2m/4ft
395.00
HT-041302
HT-041401
HT-041402
PS1000 Autospec Universal Wire-in Harness Only - Long
2.5m/8ft with NEW 6 circuit Haltech fuse box with lid. Includes fuses, 4 relays and pins to use the spare 2 circuits
549.00
395.00
PS2000 Autospec Universal Wire-in Harness Only - Short - 1.2m/4ft
PS2000 Autospec Universal Wire-in Harness - Long
2.5m/8ft with NEW 6 circuit Haltech fuse box with lid. Includes fuses, 4 relays and pins to use the spare 2 circuits
599.00
HT-140901
Elite 1500 - 1.2m (4 ft) Basic Universal Wire-in Harness Only (no relays or fuses)
449.00 NEW PRODUCT
HT-140904
Elite 1500 - 2.5m (8 ft) Premium Universal Wire-in Harness Only
Includes firewall grommet, moulded 6 power circuit Haltech fuse box & lid. Includes 4 relays & 7 fuses (includes pins for the 2 spare power circuits)
549.00 NEW PRODUCT
HT-141301
Elite 2500 - 1.2m (4 ft) Basic Universal Wire-in Harness Only (no relays or fuses)
449.00 NEW PRODUCT
HT-141304
Elite 2500 - 2.5m (8 ft) Premium Universal Wire-in Harness Only
Includes firewall grommet, moulded 6 power circuit Haltech fuse box & lid. Includes 4 relays & 7 fuses (includes pins for the 2 spare power circuits)
599.00 NEW PRODUCT
HT-130100
Sport to Elite Harness upgrade kit -13 terminated colour coded 2.5m wires and 2 blanking pins
59.00 NEW PRODUCT
Terminated Engine Harnesses
HT-041207
PS1000 Mazda 13B Terminated Harness Only
Includes flying lead ignition harness. Suits Square Bosch EV1 injector connectors
899.00
HT-041208
PS1000 Mazda 13B Terminated Harness Only
Includes pre-wired LS1 ignition coil harness. Suits Square Bosch EV1 injector connectors
(LS1 ignition coils are NOT included. Please order 4 x HT-020102 if required)
959.00
HT-041209
PS1000 Mazda 13B Terminated Harness Only
Includes pre-wired HPI4 15AMP 4CH Ignition module harness. Suits Square Bosch EV1 injector connectors (Ignition module & coils are NOT included. Please order HT-020032 & 4
x HT-020110 if required)
969.00
HT-045676
PS2000 FORD 89-95 5.0 Terminated Full Sequential Harness Only
Suits Square Bosch EV1 injector connectors - Includes Engine Harness, & Fuse Block.
Full Sequential Injection Pre-wired to connect directly to OEM TFI Module, Includes breakouts for Distributor or Crank Sensor Trigger
(Use with OEM TFI Ignition or CDI MSD6, MSD7, Crane, Mallory, etc)
999.00
HT-045505
PS2000 Nissan RB30 Single Cam Terminated Harness Only
Suits Square Bosch EV1 injector connectors. Includes Engine Harness, & Fuse Block.
Pre-wired to connect directly to the supplied LS1 ignition coil with billet mounting bracket.
Includes air & coolant temp sensors.
(Can be reconfigured to run 6 individual ignition coils using HT-045604)
1099.00
Page 4 of 9
HT-045504
PS2000 Nissan RB30 6 Channel Flying Lead Ignition Harness
Used to expand to 6 individual ignition coils.(Coils and plugs are NOT included)
HT-041466
PS2000 Toyota 2JZ Terminated Harness Only
Includes pre-wired HPI6 15AMP 6CH Ignition Module to factory coil ignition harness.
Suits Square Bosch EV1 injector connectors.
(Ignition module is NOT included. Please order HT-020036 if required)
1199.00
HT-041467
PS2000 Toyota 2JZ Terminated Harness Only
Suits Square Bosch EV1 injector connectors. Includes pre-wired M&W Pro-16b 6-wire CDI to factory coil ignition harness.
(CDI module is NOT included. Please order HT-020256 if required)
1249.00
HT-045655
PS2000 GM GEN III LS1 & LS6 Non DBW Terminated Harness Only
Suits Square Bosch EV1 injector connectors. Includes Engine Harness, & Fuse Block Kit.
Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector.
(LS1 ignition coils and Harnesses are NOT included)
999.00
HT-045657
GM GEN III LS1 & LS6 Terminated Ignition Harness Kit
Includes Bank 1 & 2 Coil Harness (Pre-wired to connect LS1 Ignition coils to OEM 7 Pin Coil Harness Connector)
199.00
HT-045663
PS2000 GM GEN IV LS2 & LS3 Non DBW Terminated Harness Only
* Requires retrofit of cable operated throttle body
Suits Square Bosch EV1 injector connectors. Includes Engine Harness & Fuse Block Kit.
Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector.
(Ignition coils and harnesses are NOT included)
999.00
HT-045666
PS2000 GM GEN IV LS2 & LS3 Non DBW Terminated Harness Only
* Requires retrofit of cable operated throttle body
Suits factory EV6 injector connectors. Includes Engine Harness & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector.
(Ignition coils and harnesses are NOT included)
999.00
HT-140930
Elite 1500 Mitsubishi 4G63 Terminated Harness Only
Suits 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes Engine Harness with Fuse block kit and Flying lead ignition harness.
999.00 NEW PRODUCT
HT-140931
Elite 1500 Mitsubishi 4G63 Terminated Harness Only
Suits 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes Engine Harness with Fuse block kit and Flying lead ignition harness.
999.00 NEW PRODUCT
HT-140932
Elite 1500 Mitsubishi 4G63 Terminated Harness Only
Suits 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes Engine Harness with Fuse block kit and pre-wired HPI4 15AMP 4CH Ignition Module C.O.P. Ignition Harness.
(Ignition module is NOT included. Please order HT-020032 if required)
1099.00 NEW PRODUCT
HT-140933
Elite 1500 Mitsubishi 4G63 Terminated Harness Only
Suits 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes Engine Harness with Fuse block kit and pre-wired HPI4 15AMP 4CH Ignition Module C.O.P. Ignition Harness.
(Ignition module is NOT included. Please order HT-020032 if required)
1099.00 NEW PRODUCT
HT-140934
Elite 1500 Mitsubishi 4G63 Terminated Harness Only
Suits 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI C.O.P. Ignition Harness.
(CDI unit is NOT included. Please order HT-020203 if required)
1199.00 NEW PRODUCT
HT-140935
Elite 1500 Mitsubishi 4G63 Terminated Harness Only
Suits 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI C.O.P. Ignition Harness.
(CDI unit is NOT included. Please order HT-020203 if required)
1199.00 NEW PRODUCT
HT-141367
Elite 2500 GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Only (suit factory EV6 injector connectors) - Includes Engine Harness, & Fuse Block Kit. Pre-wired to
connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included)
1099.00 NEW PRODUCT
139.00
Plug 'n' Play Adaptor Harnesses
ALL SPORT PLUG 'N' PLAY ADAPTOR HARNESSES NOW INCLUDE AN AIR TEMP SENSOR, PLUG AND PINS
HT-041310
PS1000 Plug 'n' Play Adaptor Harness Only - Nissan N14 GTIR (90-95)
595.00
HT-041311
PS1000 Plug 'n' Play Adaptor Harness Only - Nissan S13 CA18
595.00
HT-041312
PS1000 Plug 'n' Play Adaptor Harness Only - Nissan S13 SR20 DET
595.00
HT-041313
PS1000 Plug 'n' Play Adaptor Harness Only - Nissan S14s1 "Zenki"
595.00
HT-041320
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda RX7 FC3S-S4 (86-88)
595.00
HT-041321
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda RX7 FC3S-S5 (89-91)
595.00
HT-041322
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda RX7 FD3S-S6 (92-95)
(2 row ECU plug - Single turbo conversion only)
595.00
HT-041329
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda RX7 FD3S-S7&8 (96-02)
(4 row ECU plug - Single turbo conversion only)
595.00
HT-041319
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda MX5 NB 1.8 SP FACTORY TURBO
(3 Plug/3 Row ECU)
595.00
HT-041323
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda MX5 NA 1.6
(2 Plug ECU)
595.00
HT-041324
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda MX5 NA 1.8
(2 Plug ECU)
595.00
HT-041325
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda MX5 NB 1.8
(99 Model - 3 Plug/2 Row ECU)
595.00
HT-041326
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda MX5 NA 1.8 Special & Anniversary Models
(3 Plug ECU)
595.00
HT-041327
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda MX5 NB 1.8 Non VCT 00-04 Model
(3 Plug/3 Row ECU)
595.00
HT-041328
PS1000 Plug 'n' Play Adaptor Harness Only - Mazda MX5 NB 1.8 VCT 00-04 Model
(3 Plug/3 Row ECU)
595.00
HT-041332
PS1000 Plug 'n' Play Adaptor Harness Only - Honda OBD-1
595.00
HT-041340
PS1000 Plug 'n' Play Adaptor Harness Only - EVO 1,2,3,GSR and RVR
595.00
HT-041341
PS1000 Plug 'n' Play Adaptor Harness Only - EVO 4,5,6 & Mitsubishi 2G DSM (95-99)
595.00
HT-041342
PS1000 Plug 'n' Play Adaptor Harness Only - EVO 6.5
595.00
HT-041347
PS1000 Plug 'n' Play Adaptor Harness Only - EVO 7 (Manual transmission only)
595.00
HT-041344
PS1000 Plug 'n' Play Adaptor Harness Only - EVO 8 (5-speed)
595.00
HT-041343
PS1000 Plug 'n' Play Adaptor Harness Only - Mitsubishi Galant VR4/1G DSM (89-94)
595.00
HT-041350
PS1000 Plug 'n' Play Adaptor Harness Only - Subaru RS Liberty & WRX MY93-96
595.00
HT-041352
PS1000 Plug 'n' Play Adaptor Harness Only - Subaru WRX MY97-98
595.00
HT-041353
PS1000 Plug 'n' Play Adaptor Harness Only - Subaru WRX MY99-00
595.00
HT-041360
PS1000 Plug 'n' Play Adaptor Harness Only - Toyota Celica GT-FOUR ST185 (3S-GTE)
595.00
HT-041470
PS2000 Plug 'n' Play Adaptor Harness Only - Ford Mustang 89-93 (V8 5.0/5.8L)
595.00
HT-041471
PS2000 Plug 'n' Play Adaptor Harness Only - Ford Mustang 94-95 (V8 5.0/5.8L, Manual trans only)
595.00
HT-041460
PS2000 Plug 'n' Play Adaptor Harness Only - Toyota Supra JZA80 2JZ (Manual transmission only)
595.00
HT-140980
Elite 1500 Plug 'n' Play Adaptor Harness Only - Yamaha WaveRunner FX, FZS, FZR 2008-2014 - inc Mounting Bracket, Waterproof CAN USB Extension, USB Software Key and
USB programming cable
749.00 NEW PRODUCT
Page 5 of 9
PLUGS, PINS AND WIRING PRODUCTS
HT-030001
Plug and Pins Only - 26 & 34 Pin AMP - Suit E8/11 - PS1000/2000 - Elite 1500/2500 ECUs
HT-030052
Plastic Waterproofing/Blanking Pins Only - Suit 26 Flat/26 & 34 Pin AMP Range - Pack of 10
125.00
10.00 NEW PRODUCT
HT-030050
ECU Pins Only - Suit 26 Flat/26 & 34 Pin AMP Range (& E6X) - Pack of 10
15.00
HT-130050
DTM 4 Male Plug and Pins - suit Elite ECU CAN port (as supplied with the ECU)
15.00
HT-030003
Plug and Pins Only - 8 Pin TYCO -Suit Can Connector BLACK
15.00
HT-030004
Plug and Pins Only - 8 Pin TYCO - Suit Can Connector WHITE
15.00
HT-030005
Plug and Pins Only - 12 Pin TYCO - Suit Digital Reluctor Adaptor (DRA)
25.00
HT-030006
Plug and Pins Only - 16 Pin TYCO - Suit PRO/Sport Plug-in Aux harn & TCA Box
40.00
HT-030007
Plug and Pins Only - 24 Pin TYCO - Suit IO12 Box, WB1, WB2 & Emulator
60.00
HT-030008
Plug and Pins Only - 32 Pin TYCO - Suit Sprint & Platinum Interceptor
80.00
HT-030051
ECU Pins only - Suit 8-32 Pin TYCO Range - Pack of 10
15.00
HT-030200
Power Relay 30A 5 Pin with Mounting Tab - 30A (Does not suit Haltech Fuse box)
15.00
HT-030201
Plug and Pins Only -Suit Power Relay
15.00
HT-030204
Power Relay 30A 5 Pin suits Haltech Fuse Box (No mounting tab) - 30A
15.00
HT-030300
HT-030301
HT-030302
Plug and Pins Only -Suit Bosch Injectors EV1 Square Type
Male Adaptor suit Bosch Injectors EV1 Square Type - 75mm flying lead used for injector plug adaptors
Plug and Pins Only -Male Adaptor suit Bosch Injectors EV1 Square Type
15.00
15.00
15.00
HT-030303
Plug and Pins Only - Suit US Injectors EV6 Type (also suits ID1000)
15.00
HT-030304
HT-030305
HT-030400
Plug and Pins Only - Suit ID2000/Bosch2000 Injectors Denso Oval Type
Female Adaptor suit Bosch Injectors EV1 Square Type - 75mm flying lead used for injector plug adaptors
Plug and Pins Only -Suit Factory Toyota 2JZ ign coil
15.00
15.00
25.00
HT-030401
Plug and Pins Only -Suit Factory Toyota 2JZ Crank or Cam
25.00
HT-030402
Plug and Pins Only -Suit Factory Toyota 2JZ 6 Pin Idle Speed Motor
35.00
HT-030102
6 Circuit Haltech Fuse Box with Lid and all required pins (Does not include relays or fuses)
80.00
HT-030150
Pins only - Suit Fuses only in the 6 Circuit Haltech Fuse Box -Pack of 10
15.00
HT-030250
Pins only - Suit Relays only in the 6 Circuit Haltech Fuse Box -Pack of 10
15.00
HT-039001
Firewall Grommet - Black Rubber suits 2" (51mm) hole.
15.00 NEW PRODUCT
FUEL INJECTORS PLUG & PINS
ECU INPUTS
MAP SENSORS
TI SENSORS MUST NOT BE MOUNTED DIRECTLY INTO THE INLET MANIFOLD, THEY MUST BE REMOTE MOUNTED AND CONNECTED VIA A FLEXIBLE HOSE.
If required use Pressure Sensor Extension Hose HT-039103
HT-039100
Silicone Hose 3mm ID (2m/6ft Length) - Black
HT-010150
Bulkhead Hose Connector -Suit MAP Sensor Hose (3-5mm ID)
22.00
HT-010100
1 Bar GM MAP Sensor (inc plug & pins)
HT-010101
Plug and Pins Only -Suit 1 Bar GM MAP Sensor (Green)
HT-010102
2 Bar GM MAP Sensor (inc plug & pins)
HT-010103
Plug and Pins Only -Suit 2 Bar GM MAP Sensor (Black)
HT-010104
3 Bar GM MAP Sensor (inc plug & pins)
HT-010105
Plug and Pins Only -Suit 3 Bar GM Map Sensor (Orange)
HT-010106
4 Bar GM MAP Sensor (inc plug & pins)
HT-010107
Plug and Pins Only -Suit 4 Bar GM Map Sensor
HT-010110
5 Bar "TI" MAP Sensor (inc plug & pins) 1/8 NPT
(All TI SENSORS MUST NOT BE MOUNTED DIRECTLY INTO THE INLET MANIFOLD, THEY MUST BE REMOTE MOUNTED AND CONNECTED VIA A FLEXIBLE HOSE)
If required use Pressure Sensor Extension Hose HT-039103
HT-010111
Plug and Pins Only -Suit 5 Bar "TI" MAP Sensor
HT-010130
7 Bar "TI" MAP Sensor (inc plug & pins) 1/8 NPT
(All TI SENSORS MUST NOT BE MOUNTED DIRECTLY INTO THE INLET MANIFOLD, THEY MUST BE REMOTE MOUNTED AND CONNECTED VIA A FLEXIBLE HOSE)
If required use Pressure Sensor Extension Hose HT-039103
HT-010131
Plug and Pins Only -Suit 7 Bar "TI" MAP Sensor
HT-039103
Pressure Sensor Extension Kit
450mm/18" Fragola -4AN Hose with Male & Female 1/8th NPT Adaptors & Rubber Insulated
P-clamps - Suit 1/8th NPT Thread MAP, Oil & Fuel Pressure sensors.
HT-010118
1 Bar Billet Remote Mount Delco MAP Sensor Kit (inc plug & pins)
199.00
HT-010120
1 Bar Delco MAP Sensor Only (inc plug & pins)
119.00
HT-010121
Plug and Pins Only -Suit 1 Bar Delco MAP Sensor
HT-010122
2 Bar Billet Remote Mount Delco MAP Sensor Kit (inc plug & pins)
199.00
HT-010124
2 Bar Delco MAP Sensor Only (inc plug & pins)
119.00
HT-010125
Plug and Pins Only -Suit 2 Bar Delco MAP Sensor
HT-010126
3.3 Bar Billet Remote Mount Delco MAP Sensor Kit (inc plug & pins)
249.00
HT-010128
3 .3 Bar Delco MAP Sensor Only (inc plug & pins)
169.00
HT-010129
Plug and Pins Only -Suit 3.3 Bar Delco MAP Sensor
15.00
119.00
15.00
119.00
15.00
139.00
15.00
169.00
15.00
349.00
15.00
349.00
15.00
59.00
UPDATED
39.00
39.00
39.00
PRESSURE SENSORS
ALL PRESURE SENSORS MUST NOT BE MOUNTED DIRECTLY
TO THE FUEL RAIL OR ENGINE BLOCK,
THEY MUST BE REMOTE MOUNTED AND CONNECTED VIA A FLEXIBLE HOSE.
If required use Pressure Sensor Extension Hose HT-039103
HT-010904
150 PSI "TI" Fuel/Oil Pressure Sensor (inc plug & pins) 1/8 NPT
(All PRESSURE SENSORS MUST NOT BE MOUNTED DIRECTLY INTO THE FUEL RAIL OR ENGINE BLOCK, THEY MUST BE REMOTE MOUNTED AND CONNECTED VIA A
FLEXIBLE HOSE)
If required use Pressure Sensor Extension Hose HT-039103
HT-010905
Plug and Pins Only - Suit 150 PSI "TI" Fuel/Oil Pressure Sensor
HT-010906
250 PSI "TI" Fuel/Oil Pressure Sensor (inc plug & pins) 1/8 NPT
(All PRESSURE SENSORS MUST NOT BE MOUNTED DIRECTLY INTO THE FUEL RAIL OR ENGINE BLOCK, THEY MUST BE REMOTE MOUNTED AND CONNECTED VIA A
FLEXIBLE HOSE)
If required use Pressure Sensor Extension Hose HT-039103
HT-010907
HT-010908
269.00
15.00
Plug and Pins Only - Suit 250 PSI "TI" Fuel/Oil Pressure Sensor
2000 PSI "Honeywell" Brake/Nitrous Pressure Sensor (inc plug & pins) 1/8 NPT
269.00
15.00
349.00
HT-010909
Plug and Pins Only - Suit 2000 PSI "Honeywell" Pressure Sensor
15.00
HT-039103
Pressure Sensor Extension Kit
450mm/18" Fragola -4AN Hose with Male & Female 1/8th NPT Adaptors & Rubber Insulated
P-clamps - Suit 1/8th NPT Thread MAP, Oil & Fuel Pressure sensors.
59.00
HT-010200
Air Temp Sensor - Small Thread (inc plug & pins) M14 x 1.5
50.00
HT-010201
Plug and Pins Only - Suit Air Temp Sensor - Small Thread
15.00
HT-010202
Air Temp Sensor - Large Thread (inc plug & pins) 3/8 NPT 18TPI
50.00
HT-010203
Plug and Pins Only - Suit Air Temp Sensor - Large Thread
15.00
HT-010204
Air Temp Sensor - 1/4 NPT Thread (inc plug & pins)
50.00
HT-010205
Plug and Pins Only - Suit Air Temp Sensor 1/4 NPT
15.00
HT-010206
Air Temp Sensor - 1/8 NPT Thread (inc plug & pins)
50.00
HT-010207
Plug and Pins Only - Suit Air Temp Sensor 1/8 NPT
15.00
HT-010230
Weld Fitting M14 x 1.5 - Suit Small Thread Air Temp - Aluminum
10.00
HT-010233
Weld Fitting 3/8 NPT - Suit Large Air Temp - Aluminum
10.00
AIR TEMP SENSORS (127 C or 260 F MAX READING)
Page 6 of 9
UPDATED
FLUID TEMP SENSORS (Typically 127 C or 260 F MAX READING)
HT-010300
Coolant Temp Sensor - Small Thread (inc plug & pins) M12 x 1.5
50.00
HT-010301
Plug and Pins Only - Suit Coolant Temp Sensor - Small Thread
15.00
HT-010302
Coolant Temp Sensor - Large Thread (inc plug & pins) 3/8 NPT 18TPI
50.00
HT-010303
Plug and Pins Only - Suit Coolant Temp Sensor - Large Thread
15.00
HT-010304
Coolant Temp Sensor - 1/8 NPT Thread (inc plug & pins)
50.00
HT-010305
Plug and Pins Only - Suit Coolant Temp Sensor 1/8 NPT
15.00
HT-010330
Weld Fitting M12 x 1.5 - Suit Small Thread Water Temp - Aluminum
10.00
HT-010333
Weld Fitting 3/8 NPT - Suit Large Water Temp - Aluminum
10.00
HT-010306
Oil Temperature sensor, High Range 150°C, 1/8 NPT thread, inc plug and pins.
99.00 NEW PRODUCT
HT-010307
Plug and Pins Only - Suit Oil Temperature sensor, 150°C, 1/8 NPT thread
15.00 NEW PRODUCT
THROTTLE POSITION SENSORS
HT-010402
Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft (inc plug & pins)
HT-010403
Plug and Pins Only - Suit Throttle Position Sensor - Grey
HT-010404
HT-010405
149.00
15.00
Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft (inc plug & pins)
149.00
*Most Common Type*
Plug and Pins Only - Suit Throttle Position Sensor - Black
15.00
TRIM MODULES
HT-010500
HT-010502
Boost/Fuel/Ign Trim Module - Suit E8/E11 & most patch harness
90.00
*Please confirm plug type*
Boost/Fuel/Ign Trim Module - Suit Platinum Sport 1000/2000 - Long or Short Harness
90.00
PICKUP/TRIGGERS
HT-010613
DRA Digital Reluctor Adaptor - inc Harness
299.00
(Converts Sine wave VR sensor output to Digital signal)
HT-030005
Plug and Pins Only - 12 Pin TYCO - Suit Digital Reluctor Adaptor (DRA)
25.00
HT-040005
DRA - 0.6m/2ft Flying Lead Harness Only
69.00
HT-010602
Rare Earth Magnets (5mm DIA x 2mm H)
HT-010604
S3 - Black Dual Channel Hall Effect Sensor 1/2" UNF (inc plug & pins)
HT-010605
Plug and Pins Only - Suit S3 Black Hall Effect Sensor
HT-010606
S4 - Grey Dual Channel Hall Effect Sensor 1/2" UNF (inc plug & pins)
HT-010607
Plug and Pins Only - Suit S4 Grey Hall Effect Sensor
HT-010608
Honeywell GT101 Single Channel Hall Effect Sensor 18mm DIA (Wheel Speed, Crank/Cam) (inc matching DTM 3 plug and pin set)
HT-010610
HT-010612
25.00
199.00
15.00
199.00
15.00
"Red" Single Channel Hall Effect Sensor M12x1.0 (Wheel Speed, Crank/Cam)
109.00
109.00
(inc matching DTM 3 plug and pin set)
Stainless Steel Single Channel Hall Effect Sensor 3/8-24 (Wheel Speed, Crank/Cam)
229.00
(inc matching DTM 3 plug and pin set)
CAN O2 WIDEBAND CONTROLLERS (CAN and 0-5 V analogue outputs)
Accurate digital signal with diagnostic and status reporting via CAN
HT-059976
WBC1 - Single Channel CAN O2 Wideband Controller Kit
Box A with 2.5m/8ft flying lead harness, Black 600mm CAN cable, one sensor and weld-on bung
459.00
HT-010730
Yamaha WaveRunner FX, FZS, FZR (2008-2012?) WBC1 - Single Channel CAN O2 Wideband Controller Kit
Includes Terminated wiring harness, Elite CAN cable, one Sensor and Early Style 1" Thread O2 Sensor Adaptor
489.00 NEW PRODUCT
HT-059970
HT-059986
HT-059980
WBC1 - Single Channel CAN O2 Wideband Controller Box A - ECU ONLY
249.00
(includes Black 600mm CAN Cable)
WBC2 - Dual Channel CAN Wideband Controller Kit
Box A with 2.5m/8ft flying lead harness, Black 600mm CAN cable, two sensors and weld-on bungs
WBC2 - Dual Channel CAN Wideband Controller Box A - ECU ONLY
725.00
375.00
(includes Black 600mm CAN Cable)
WBC WIRING
HT-030007
Plug and Pins Only - 24 Pin TYCO - Suit IO12 Box, WB1, WB2 & Emulator
HT-049970
WBC1 - Single Channel CAN Wideband Controller - 2.5m/8ft Flying Lead Harness Only
149.00
60.00
HT-049976
WBC2 - Dual Channel CAN Wideband Controller - 2.5m/8ft Flying Lead Harness Only
169.00
Methanol Wideband Controller (0-5 V analogue output only)
HT-010720
Methanol Wideband Controller - inc Ext Harness, NTK Sensor & Weld Bung
919.00
HT-010721
Methanol Wideband NTK Sensor Only
229.00
O2 Sensors, Gauges and Accessories
HT-010700
Narrow Band O2 Sensor 4 Wire - for direct use with ECU (No controller required)
HT-010702
O2 Sensor Weldable Fitting Bung and Blanking Plug M18 x1.5
HT-010714
Wideband O2 Sensor only - Bosch LSU 4.2 (pre-terminated with 6 Pin DT connector)
HT-010703
Wideband 4.0m/12ft O2 Sensor Extension Harness (6 Pin DT connectors)
145.00
19.00
195.00
59.00
Flex Fuel Sensors
HT-011000
Flex Fuel Composition Sensor - Suit 3/8 "GM Spring Lock" fittings (inc plug & pins)
279.00
HT-011001
Plug and Pins Only - Suit Flex Fuel Composition Sensor
40.00
HT-011030
Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male - Suits Flex Fuel Sensor (Includes Two Fittings)
59.00
HT-059906
IO Expander/Flex Fuel Composition Sensor Bundle - Buy together and save!
(inc both plug & pins & BB600 CAN Cable) - Required for some Platinum PRO Plug-in ECUs. Please consult Haltech for further information
499.00
Knock Sensors
HT-011100
Knock Sensor -Genuine Bosch suit 8mm (5/16") mounting bolt (inc plug & pins)
HT-011101
Plug and Pins Only - Suit Knock Sensor -Genuine Bosch suit 8mm (5/16") mounting bolt
125.00 NEW PRODUCT
15.00 NEW PRODUCT
CAN THERMOCOUPLE EXPANSION PRODUCTS (1250 C or 2282 F MAX READING)
To order this kit to suit your specific
application please select from the
parts listed below
TCA2 - Dual Channel Thermocouple Kit
To order this kit to suit your specific
application please select from the
parts listed below
TCA4 - Quad Channel Thermocouple Kit
675.00
Includes 2 x 1/4" Open TIP Thermocouples (any length listed) and 2 x Fitting kits (any type listed)
1079.00
Includes 4 x 1/4" Open TIP Thermocouples (any length listed) and 4 x Fitting kits (any type listed)
THERMOCOUPLE AMPLIFIERS (CAN or 0-5 V analogue outputs)
HT-059920
HT-059921
HT-059940
HT-059941
TCA2 - Dual Channel Thermocouple Amplifier Box A - BOX ONLY
399.00
(includes Black 600mm CAN Cable)
TCA2 - Dual Channel Thermocouple Amplifier Box B - BOX ONLY
399.00
(includes Black 600mm CAN Cable)
TCA4 - Quad Channel Thermocouple Amplifier Box A - BOX ONLY
549.00
(includes Black 600mm CAN Cable)
TCA4 - Quad Channel Thermocouple Amplifier Box B - BOX ONLY
549.00
(includes Black 600mm CAN Cable)
Page 7 of 9
TCA WIRING (Optional - Only required if using the 0-5 V outputs)
HT-030006
Plug and Pins Only - 16 Pin TYCO - Suit PRO/Sport Plug-in Aux harn & TCA Box
40.00
HT-049920
TCA2 - Dual Channel Thermocouple Amplifier Box - 1.5m/3ft Flying Lead Harness Only
115.00
HT-049940
TCA4 - Quad Channel Thermocouple Amplifier Box - 1.5m/3ft Flying Lead Harness Only
1115.00
HT-010860
1/4" Open Tip Thermocouple only - (0.61m) 24" Long
109.00
HT-010861
1/4" Open Tip Thermocouple only - (0.72m) 28-1/2" Long
109.00
HT-010862
1/4" Open Tip Thermocouple only - (0.84m) 33" Long
109.00
HT-010863
1/4" Open Tip Thermocouple only - (0.95m) 37-1/2" Long
109.00
HT-010864
1/4" Open Tip Thermocouple only - (1.07m) 42" Long
109.00
HT-010865
1/4" Open Tip Thermocouple only - (1.18m) 46-1/2" Long
109.00
HT-010866
1/4" Open Tip Thermocouple only - (1.30m) 51" Long
109.00
HT-010867
1/4" Open Tip Thermocouple only - (1.41m) 55-1/2" Long
109.00
HT-010868
1/4" Open Tip Thermocouple only - (1.52m) 60" Long
109.00
HT-010869
1/4" Open Tip Thermocouple only - (1.64m) 64-1/2" Long
109.00
HT-010870
1/4" Open Tip Thermocouple only - (1.75m) 69" Long
109.00
HT-010871
1/4" Open Tip Thermocouple only - (1.87m) 73-1/2" Long
109.00
HT-010872
1/4" Open Tip Thermocouple only - (1.98m) 78" Long
109.00
HT-010873
1/4" Open Tip Thermocouple only - (2.10m) 82-1/2" Long
109.00
HT-010874
1/4" Open Tip Thermocouple only - (2.21m) 87" Long
109.00
HT-010875
1/4" Open Tip Thermocouple only - (2.32m) 91-1/2" Long
109.00
HT-010876
1/4" Open Tip Thermocouple only - (2.44m) 96" Long
HT-010810
1/4" Mild Steel Weld-on Kit - inc Nut and Ferrule
22.00
HT-010812
1/4" Stainless Steel Weld-on Kit - inc Nut and Ferrule
22.00
HT-010813
1/4" Stainless Compression Fitting Kit - 1/8” NPT Thread
TERMINATED THERMOCOUPLES - Pre-terminated with Mini K Type Connectors to suit TCA2 & TCA4
109.00
THERMOCOUPLE FITTING KITS
22.00
THERMOCOUPLE FITTING SPARES
HT-010808
1/4" Nut and Brass Ferrule Only
15.00
HT-010809
1/4" Mild Steel Weld-on Base Only
15.00
HT-010811
1/4" Stainless Steel Weld-on Base Only
15.00
ECU OUTPUTS
OEM IGNITION MODULES
HT-020002
Dual Channel Igniter (DUMB) - inc Plugs, Pins, Mounting Bracket and Paste
HT-020003
Plug and Pins Only - Suit Dual Channel Igniter
HT-020004
Triple Channel Igniter (DUMB) - inc Plugs, Pins, Mounting Bracket and Paste
169.00
HT-020005
Plug and Pins Only - Suit Triple Channel Igniter
HT-020006
Quad Channel Igniter (DUMB) - inc Plugs, Pins, Mounting Bracket and Paste
HT-020007
Plugs and Pins Only - Suit Quad Channel Igniter
30.00
HT-020008
Mounting Bracket only - Suit all Haltech Igniters - inc screws and paste
15.00
HT-020010
Thermal Paste - Suits all Igniters
15.00
199.00
15.00
289.00
6.00
15 AMP HIGH POWER IGNITER MODULES
HT-020032
HPI4 - High Power Igniter - Quad Channel - Module Only
HT-020033
Plug and Pins Only -Suit 26 Pin Flat AMP Quad Channel HPI4
HT-020034
HPI4 - High Power Igniter - Quad Channel - inc Plug & Pins
299.00
69.00
349.00
HT-020035
HPI4 - High Power Igniter - Quad Channel - 2m Flying Lead Kit
449.00
HT-040023
HPI4 - High Power Igniter - 2m Flying Lead Loom Only
169.00
399.00
HT-020036
HPI6 - High Power Igniter - Six Channel - Module Only
HT-020037
Plug and Pins Only -Suit 26 Pin Flat AMP Six Channel HPI6
HT-020038
HPI6 - High Power Igniter - Six Channel - inc Plug & Pins
69.00
449.00
HT-020039
HPI6 - High Power Igniter - Six Channel - 2m Flying Lead Kit
549.00
HT-040024
HPI6 - High Power Igniter - 2m Flying Lead Kit Loom Only
169.00
HT-020040
HPI8 - High Power Igniter - Eight- Channel - Module Only
HT-020041
Plug and Pins Only -Suit 26 Pin Flat AMP Eight- Channel HPI8
HT-020042
HPI8 - High Power Igniter - Eight- Channel - inc Plug & Pins
499.00
69.00
549.00
HT-020043
HPI8 - High Power Igniter - Eight- Channel - 2m Flying Lead Kit
649.00
HT-040025
HPI8 - High Power Igniter - 2m Flying Lead Loom Only
169.00
HT-020112
High Output IGBT Inductive Coil suit HPI modules - inc Plug & Pins
69.00 NEW PRODUCT
HT-020113
Plugs and Pins Only - Suit High Output IGBT Inductive Coil
15.00 NEW PRODUCT
IGNITION COILS
HT-020114
High Output IGBT Inductive Coil with built-in Ignitor - inc Plug & Pins
89.00 NEW PRODUCT
HT-020115
Plugs and Pins Only - Suit High Output IGBT Inductive Coil with built-in Ignitor
15.00 NEW PRODUCT
HT-020102
LS1 Coil with built-in Ignitor (inc plug & pins)
109.00
HT-020103
HT-020100
HT-020110
Plugs and Pins Only - Suit LS1 Coil
Dual Post Coil (No igniter included)
Bosch HEC Single High Power Inductive coil suit HPI modules - inc Plug & Pins
15.00
139.00
79.00
Capacitor Discharge Ignition Systems - CDI
Power Select CDI - Selectable dual power output 115mJ/150mJ spark energy allows your ECU to automatically switch output power on the fly under high load conditions. Control 4,
6 or 8 channels of direct fire ignition using only one ignition output. Re-use your unused ignition outputs to control other functions (Sport ECUs only).
*Requires Haltech IMS - (Ignition Multiplex System) single wire ignition trigger output.
(Elite 1500/2500, Platinum Sport & Pro Plug-in ECUs Only)
HT-020203
HT-020207
HT-020211
Power Select 4 CDI - Dual Power Output 115mJ/150mJ - inc Plug and Pins.
1265.00 NEW PRODUCT
(Can be used to convert to direct fire ignition on EVO 8MR & EVO 9 using a Haltech Pro Plug-in ECU)
Power Select 6 CDI - Dual Power Output 115mJ/150mJ - inc Plug and Pins.
1495.00 NEW PRODUCT
Power Select 8 CDI - Dual Power Output 115mJ/150mJ - inc Plug and Pins.
1725.00 NEW PRODUCT
(Can be used to convert to direct fire ignition on 8 cylinder engines using a Haltech Sport ECU)
HT-020132
High Output CDI Coil - inc Plug & Pins
HT-020133
Plugs and Pins Only - Suit High Output CDI Coil
69.00 NEW PRODUCT
15.00 NEW PRODUCT
CDI Wiring & Accessories
HT-035001
CDI Wire3 14ga twisted pair tefzel (use for battery power supply) -per Metre
12.00
HT-035004
CDI Wire6 20ga twisted shielded tefzel (use for CDI to coil wiring) -per Metre
12.00
HT-035005
CDI wire sheild terminator - Requires 1 per channel
9.00 NEW PRODUCT
HT-035006
CDI GRS001 85gm Dielectric Grease - For waterproofing of the main connector
49.00 NEW PRODUCT
HT-035007
CDI CON008 18 Way Connector Plug & Pins Kit
59.00 NEW PRODUCT
HT-035008
CDI CON010 36 Way Connector Plug & Pins Kit
89.00 NEW PRODUCT
Page 8 of 9
M&W 115mJ CDIs
HT-020250
M&W Pro-10 All triggers
HT-020251
M&W Pro-12 CDI Hall/Ecu trigger
829.00
HT-020252
M&W Pro-14 CDI Hall/Ecu trigger
1159.00
605.00
HT-020253
M&W Pro-14b CDI (Twin cap) Hall/Ecu trigger
1269.00
HT-020254
M&W Pro-14d CDI Motec IEX trigger
1269.00
HT-020269
M&W Pro-14 EVO CDI Mitsubishi EVO direct fire
1269.00 NEW PRODUCT
HT-020255
M&W Pro-16 CDI (Pair) Hall/Ecu trigger
1819.00
HT-020256
M&W Pro-16b CDI Hall/Ecu trigger
1395.00
HT-020257
M&W Pro-16c CDI Autronic multiplex trigger
1395.00
HT-020271
M&W Pro-16c CDI (Pair) Autronic multiplex trigger
1819.00 NEW PRODUCT
HT-020258
M&W Pro-16d CDI Motec IEX trigger
1509.00
HT-020272
M&W Pro-18 CDI (Pair) Hall/Ecu trigger
2059.00 NEW PRODUCT
HT-020259
M&W Pro-18b CDI Hall/Ecu trigger
1629.00
HT-020260
M&W Pro-18c CDI Autronic multiplex trigger
1629.00
HT-020261
M&W Pro-18d CDI Motec IEX trigger
1749.00
HT-020262
M&W Pro-14R Rotary CDI Hall/Ecu trigger
1319.00
HT-020273
M&W Pro-Drag1 250mJ CDI Hall/Ecu trigger
HT-020263
M&W Pro-Drag2 250mJ CDI Hall/Ecu trigger
1159.00
HT-020264
M&W Pro-Drag4 250mJ CDI Hall/Ecu trigger
1489.00
HT-020274
M&W Pro-Drag4d 250mJ CDI Motec IEX trigger
1599.00 NEW PRODUCT
M&W Pro- Drag 250mj CDIs (For Drag Racing Use Only)
919.00 NEW PRODUCT
HT-020270
M&W Pro-Drag4 EVO 250 mJ CDI Mitsubishi EVO direct fire
1489.00 NEW PRODUCT
HT-020265
M&W Pro-Drag6 250mJ CDI (Pair) Hall/Ecu trigger
1929.00
HT-020275
M&W Pro-Drag6c 250mJ CDI (Pair) Autronic multiplex trigger
1929.00 NEW PRODUCT
HT-020267
M&W Pro-Drag8 250mJ CDI (Pair) Hall/Ecu trigger
2639.00 NEW PRODUCT
HT-020268
M&W Pro-Drag8d 250mJ CDI (Pair) Hall/Ecu trigger
2859.00 NEW PRODUCT
HT-020266
M&W Pro-Drag4R Rotary 250mJ CDI (Twin cap) Hall/Ecu trigger
1689.00
M&W Pro- Drag 500mj CDIs (For Drag Racing Use Only)
HT-020276
M&W Pro-Drag2 500mJ CDI Hall/Ecu trigger
1379.00 NEW PRODUCT
HT-020277
M&W Pro-Drag4 500mJ CDI Hall/Ecu trigger
1539.00 NEW PRODUCT
HT-020278
M&W Pro-Drag4d 500mJ CDI Motec IEX trigger
1839.00 NEW PRODUCT
HT-020279
M&W Pro-Drag6 500mJ CDI (Pair) Hall/Ecu trigger
2409.00 NEW PRODUCT
HT-020280
M&W Pro-Drag6c 500mJ CDI (Pair) Autronic multiplex trigger
2419.00 NEW PRODUCT
HT-020281
M&W Pro-Drag8 500mJ CDI (Pair) Hall/Ecu trigger
2699.00 NEW PRODUCT
HT-020282
M&W Pro-Drag8d 500mJ CDI (Pair) Motec IEX trigger
3379.00 NEW PRODUCT
IDLE CONTROL
HT-020300
Idle Air Control Housing -Billet 4 Port Housing suits Screw-in motor
119.00
HT-020302
Idle Air Control Motor - Screw-in -inc plug and pins
109.00
HT-020303
Plugs and Pins Only - Suit Idle Air Control Motor - Screw-in
HT-020310
Idle Air Control Kit - Billet 1/4BSP 4 Port Housing & Screw-in motor - inc Plug and Pins
219.00
HT-020304
Idle Air Control Kit - Billet 1/4BSP 2 Port Housing & 2 Screw Style Motor - inc Plug and Pins
319.00
HT-020307
Plugs and Pins Only - Suit Idle Air Control Motor - 2 Screw Style
HT-020308
15.00
15.00
Idle Air Control Valve – Bosch BAC/PWM 2 port, 2 pin, Inc plug and pins
249.00
(For Sprint ECU or Pro ECU where 4 wire stepper motor idle control output not available)
BOOST CONTROL
HT-020400
Boost Control Solenoid 3 Port 1/8th NPT- 33Hz
149.00
(inc hose fittings, rubber isolated mount and matching DTM 2 plug and pins set)
SOLID STATE RELAY
HT-030202
Solid State Relay - 100 AMP
95.00
INJECTOR BALLAST RESISTOR
HT-020600
Injector Ballast Resistor 6 OHMS - 6 output with matching plug set
199.00
EMULATORS
HT-020602
Device Emulator 8 CH -inc 6 Spare Pull ups (Box Only)
159.00
HT-020604
Device Emulator 8 CH -inc 6 Spare Pull ups - inc Plug & Pins
199.00
HT-020605
Device Emulator 8 CH -inc 6 Spare Pull ups - 1m/3ft Flying Lead Kit
299.00
HT-030007
Plug and Pins Only - 24 Pin TYCO - Suit IO 12 Box & Emulator
HT-040004
Device Emulator 8 CH- 1m/3ft Loom Only
60.00
149.00
Page 9 of 9