IconKey™
Serial Digital Keyer
IconKey™ is the latest serial digital keyer for the NEO® frame. IconKey provides two
channels of video fill and key inputs, as well as optional internal branding, in an HD/SD
keyer. IconKey can be controlled by automation using the keying functions of the M2100
protocol, and supports the NUCLEUS™ series hardware control panel and the CCS
Navigator™ software control panels.
The IconKey logo option provides all the graphical playback power of an IconLogo™
branding system. The logo option adds four internal branding layers, each with the ability
to play back stills, bugs, animations, crawls, EAS and more.
FEATURES
• HD/SD compatible
• Two fill+key video inputs for multi-layered keying
• Preview output channel
• NUCLEUS hardware control panel and full CCS Navigator soft-panel support
• Automation support via M2100 protocol
• Eight GPI in, seven GPI out
• Logo option features:
◦ Four internal branding layers
◦ Storage for up to 999 elements: logos, animations, clocks, crawls, etc.
◦ Up to 4 GB online, 8 GB offline storage available
• Relay bypass with optional breakout box
• Breakout box support for one or two IconKey modules per 1RU frame
SPECIFICATIONS
Specifications and designs are subject to change without notice.
IconKey
1
www.broadcast.harris.com
Serial Digital Video Inputs
Number of Inputs
6 (PGM1, PGM2, Fill1, Key1, Fill2, Key2)
Standard
HDTV
1.485 Gb/s serial per SMPTE 292M 1080i/720p 59.94
Hz/50 Hz
SDTV
270 Mb/s 525/625 per SMPTE 259M-C
Equalization
Automatic up to 328 ft (100 m) of Belden 1694A
Connector Type
BNC
Return Loss (HD only)
>15 db
Impedance
75 ohms
Genlock Input
Connector Type
BNC
Number of Inputs
1 genlock
Return Loss
-40 dB to 6 MHz
Impedance
75 ohms
Reference Type
NTSC/PAL, color black, or 525/625 comp sync or tri-level
per SMPTE 240M 29.97/30/25
Level
200 mV to 2 V, nominal
Connector Type
BNC
Serial Digital Video Outputs
Standard:
HDTV
1.485 Gb/s serial per SMPTE 292M 1080i/720p 59.94
Hz/50 Hz
SDTV
270 Mb/s 525/625 per SMPTE 259M-C
Connector Type
BNC
Number of Outputs
3; PGM/A1, PGM/A2, PST/B
Return Loss
>18 db
Impedance
75 ohms
Embedded Audio
SDTV
Per SMPTE 272M (embedded as 20-bit audio only)
HDTV
Per SMPTE 299M (embedded as 24-bit audio) 48 KHz per
AES3-1992
Channels
4 groups HD, 2 or 4 groups SD
Mode
Delete existing and rewrite new audio groups
GPI Inputs and Outputs
It is assumed that these inputs/outputs are externally isolated. They are low-voltage, TTL-style input/outputs.
IconKey
2
www.broadcast.harris.com
GPI Input
Quantity
8
Type
Non-isolated TTL
Polarity
Software specified
Voltage Range
-0.3 to 5.3 V maximum
Current Load
1 mA
Connector
Part of 62-pin “D”-type or terminal strips on optional
breakout module
GPI Output
Quantity
7
Type
Open drain
Polarity
Software specified
Voltage Range
-0.3 to 5.3 V maximum
Load
40 mA maximum
Connector
Part of 62-pin “D”-type or terminal strips on optional
breakout module
Power Consumption
Frame
NEO (1RU) or NEO (3RU): <25 W
Serial Communications Interface
Standard
RS-232 or RS-422 (SMPTE S207M)
Connector
Female 9-way “D”-type
Receiver
Input Sensitivity ±200 mV
Data Comms
38,400 baud
8-bit
No parity
1 stop bit
Ethernet Port
Standard
10/100Base-T IEEE 802.3u
Connector
8-pin RJ45
Miscellaneous
Performance Temperature
41° to 104° F (5° to 40° C)
Operating Temperature
32° to 122° F (0° to 45° C)
ORDERING INFORMATION
ICONK-E
IconKey module set: DSK. Includes 2 external keying layers, 2 audio over, occupies 2
NEO slots
IconKey
3
www.broadcast.harris.com
ICONK-E-LOGO
IconKey module set with logo: DSK + MGI. Includes 2 external keying layers, 4 internal
branding layers, audio logos, 2 audio over, occupies 2 NEO slots
IconKey
ICONK-BO-V1
IconKey breakout with relay bypass, 1-channel
ICONK-BO-V2
IconKey breakout with relay bypass, 2-channel
4
www.broadcast.harris.com