Complete Life Safety Products
Fo r U. S . A . E n g i n e e r e d S y s t e m D i s t r i b u t o r s
Conventional Fire Alarm Control Panels
FA-260 Series Fire Alarm control panels
The FA-260 Series are power-packed Fire Alarm Control Panels designed for small building fire protection. The
FA-260 Series offer an exceptional feature set, a power supply that will handle the panel’s full rated load, and
flexible front panel programming for quick and simple configuration to suit the application at hand. Powerful,
versatile, and ideally suited for small, fast turnaround fire applications.
•
•
•
•
•
•
•
Two or five Class B (Style B) dual-use zones
Two Class B (Style Y) notification appliance circuits
4.2 Amp power supply
500mA of aux. power
Common alarm and trouble relay
‘Secur-Bus’ for UDACT & remote annunciator
Event buffer
•
•
•
•
•
•
•
Six programmable zone options
Class A capability
One-man walk test
Programmable silence timers
Front panel programming
Integral battery charger
Initiating circuits can be configured for sprinkler alarm and supervisory
FA-300 Series Fire Alarm control panels
Designed for small to medium commercial, institutional and industrial occupancies, the FA-300 Series Fire
Alarm Control Panels are powerful enough to meet today’s installation demands. The FA-300 Series are
available in six, eight and twelve zone models with a built-in UDACT/Digital Communicator on select models.
The FA-300 Series are available in LED or LCD display configurations.
•
•
•
•
•
•
Six, eight and twelve zone configurations
LED and LCD display configurations
Powerful 5 Amp dedicated power supply
Configurable UDACT/Digital Communicator
(on select models)
Optional city tie/polarity reversal modules
Built-in sync protocols for major strobe
manufacturers
•
•
•
•
•
•
Remote upload/download capabilities (on models with UDACT)
Individual circuit disconnect buttons
Remote relay modules
Remote programming capability
Two event history logs - 200 events per log
Optional modules for internal relay circuits
FA-1000 Series Fire Alarm control panels
The FA-1000 Series Fire Alarm Control Panels are multi-zone units designed for maximum flexibility and easy
installation and operation. Fully configurable from the front panel using push buttons and program switches,
the FA-1000 Series enables the user to configure the system to meet their specific requirements.
•
•
•
•
•
•
2
Each indicating circuit can be configured as
silenceable or non-silenceable
Each initiating circuit can be configured as
Alarm, Supervisory, Waterflow or Trouble
Two LEDs per initiating circuit; one for Trouble
and one for Status
RS-485 interface for remote multiplex
annunciators
Interface for remote trouble indicator
Easy configuration via push buttons and
program switches on the front panel
•
•
•
•
•
•
•
•
Fully site or field programmable indicating
circuits and auxiliary relays
Slide-in labels for zone identification
6 Amp power supply
Removable door for easy installation
and servicing
Removable terminal blocks for easy
wiring and servicing
Individual disconnect switches
Eight to seventy two point system
Modular design
Agent Release Control Panels
FR-320 Series agent release CONTROL PANELS
Mircom’s FR-320 is a dual releasing control panel that is field configurable for use on Deluge Sprinkler
Systems, Pre-Action Sprinkler Systems and Agent Release Systems. The mode of operation is easily configured
by selecting one of eleven pre-configured modes of operation. The simple configuration process is done via
the front panel and requires no laptop or complicated programming. The FR-320 is available with or without
a built-in UDACT/Digital Communicator.
•
•
•
•
•
•
•
•
Field configurable to operate with a Deluge
Sprinkler System, a Pre-Action Sprinkler System
and an Agent Release System
Six Class B (Style B) input circuits
Four Class B (Style Y) output circuits
True Class A circuit configuration
Cross zone option
Counting zones option
Special releasing power supply and release
activation considerations preventing
false dumps
Configurable to perform two hazard areas
•
•
•
•
•
5 Amp Power Supply
Simple panel programming through eleven
pre-configured modes of operation
Non-Verified Alarm, Non Latching Supervisory,
Latching Supervisory or Agent Release/Water
Flow depending on the Mode of Operation
selected
Configurable input circuits (2) for Manual
Release Input, Abort Input or both
Configurable output signals for steady tone
(fixed) or escalating tone (changes as input
operation changes)
Addressable Fire Alarm Control Panels
FX-350 Series Addressable Fire Alarm control panels
The FX-350 Series Analog Addressable Fire Alarm Control Panels are single loop addressable panels with
support for up to 126 addressable points. Select models are available with a built-in UDACT/Digital
Communicator. Easy to install and operate, the FX-350 Series is ideal for small to medium commercial,
institutional and industrial occupancies.
•
•
•
•
•
•
•
•
•
•
•
•
Single addressable loop that supports 126
addressable points
2 line by 20 character back-lit LCD display
Powerful 5 Amp dedicated power supply
Four Class B (Style Y) indicating circuits
Includes 32 zone LED annunciator that can be expanded to 64 zones (32 alarm and trouble LEDS)
Two event history logs - 200 events per log
Configurable for two stage operation
Supports LCD, LED and graphic annunciators
Configurable via the front panel, PC
configurator, or remote dial up through
the built-in modem (UDACT models)
Software bypass groups
Points can be any combination of Sensors or Modules
Supports Ionization Sensors, Photoelectric
Sensors, Variable Heat Sensors and Multi–Sensor (Heat/Photo)
•
•
•
•
•
•
•
•
•
5 Amp Power Supply
Model available with an integrated UDACT/
Digital Communicator
Digital Communicator can be configured for
DACT or UDACT mode of operation
Built-in sync protocols for the following strobe
manufacturers: Mircom, Amseco, System
Sensor, Gentex, Faraday and Wheelock
Relay contacts for Common Alarm, Auxiliary/
Alarm (Disconnectable), Common Supervisory
and Common Trouble
Configurable Signal Silence Inhibit, Auto Signal
Silence, Two Stage Operation and One-man
walk test
RS-485 Interface for Remote LED and LCD
Annunciators
Optional modules for additional internal relay
circuits and City Tie/Polarity Reversal
Optional trim ring for semi-flush mounting
FX-350 Series Addressable Devices
Analog Addressable Sensors/Addressable Modules/Addressable Pull Stations
Mircom offers a complete line of addressable devices for the FX-350 including:
•
Analog addressable sensors (ionization,
photoelectric, thermal and multi-criteria sensors)
all available with a variety of mounting bases to
accommodate even the most difficult installation
needs.
•
•
Addressable modules (monitor, output, relay and isolator modules)
Addressable pull stations (single and dual-action)
3
Addressable Fire Alarm Control Panels
FX-2000 Series Addressable Fire Alarm control panels
The FX-2000 Series is ideal for residential, commercial, industrial, and institutional applications. The base system
consists of one analog loop and four indicating circuits. In addition the base system supports conventional hard
wired modules. With its flexible modular design, the FX-2000 Series can be configured to meet challenging
requirements without compromising its easy installation and operation.
•
•
•
•
•
•
•
•
•
•
•
•
Large system capacity
SLCs are selectable for either Class A (Style 6) or Class B (Style 4) operation
Four Class A/B (Style Z/Y) indicating circuits
Large 4 line by 20 character back-lit LCD display
Panel security to protect site configurations
Sixteen-zone configurable LED annunciator
Supports LCD, LED and graphic annunciation
Modular design
198 addressable devices per SLC
Base system supports 16 conventional hard
wired modules with the provision to add more
using the ALC-H16 Hard wire Loop Controller
Module
Three level password protection with field
programmable definition which enables the
installer to determine what functions are
accessible for each password level
Correlatable Switch Inputs which allows for
multi-functional outputs
•
•
•
•
•
•
•
•
Four Alarm Queues with selector switches and LEDs for Alarm, Supervisory, Monitor and Trouble
Auxiliary relay contacts for Common Alarm,
Common Supervisory and Common Trouble
RS-232 output for remote system printer or CRT
Two logs track system event history (2000
events) and alarm event history (1000
events) which can be viewed on screen or
sent to a printer for easy analysis and system
maintenance
Front Panel Auto-Configure and/or Computer
laptop Programmable
Common Control switches and/or indicating
LEDs for System Reset, Signal Silence, Fire Drill,
Acknowledge, General Alarm, Lamp Test, A.C.
On, Pre-Alarm and Ground Fault
Seamlessly integrates to the QX-5000 Voice
Evacuation System via an RS-485 interface
6 or 12 Amp power supply
FX-2000 PROGRAMMABLE MODULES
The FX-2000 Addressable Fire Alarm Control Panels support programmable modules which can be
connected either internally to the fire alarm panel or externally via the RAX-LCD Remote Shared Display.
Connection to the RAX-LCD allows for unique configurations for a specific remote location.
RAX-LCD Remote Shared Display
• Provides LCD annunciation
• Driver module for standard or reduced zone
annunciation
• Driver modules for RAX-1048, FDX-008 and IPS-2424 when mounted remotely
IPS-2424 Programmable Input Switches Module
• 24 programmable switches
• Switches operate in a toggle operation
• Indicates status of disconnected zones
RAX-1048 Programmable LED Annunciator Module
• 48 programmable bi-colored LEDs
FDX-008 Fan Damper Control Module
• Individual programmed circuits for fan or damper control
• Three position selector switch for off, on and auto
• Supervised for operation
FX-2000 Series Addressable Devices
Analog Addressable Sensors/Addressable Modules/Addressable Pull Stations
Mircom offers a complete line of addressable devices for the FX-2000 including:
•
4
Analog addressable sensors (ionization,
photoelectric, thermal and multi-criteria sensors)
all available with a variety of mounting bases to
accommodate even the most difficult installation
needs.
•
•
Addressable modules (monitor, output, relay and isolator modules)
Addressable pull stations (single and dual-action)
Voice Evacuation System
QX-5000 Series VOICE EVACUATION SYSTEM
Mircom’s QX-5000 Series is a multi-channel, zoned audio system that allows the operator to selectively
page from a central location to any of the system’s audible devices. In addition, the QX-5000 allows
for zoned, fire fighter communication with remote telephone handsets that are permanently installed
throughout a building. The system has a simple interface to the Fire Alarm Control Panel, and contains its
own power supply and battery backup system.
•
•
•
•
•
•
•
•
Multi-channel, zoned voice paging and
alarm system
Multiple lobby capability
Distributed audio control
Multiple amplifier sizes
Zone or All-Call selectability (Alert/Evacuation)
Provides single or multiple command center for
use in emergencies
Multiple building interconnection
(Campus Style)
Removable terminal blocks for ease
of installation and maintenance
•
Operates from integrated 24 VDC backup batteries in the event of a power failure
Zoned, fire fighter telephone capability
Indication of all required fault conditions
Speaker circuits are integrated with amplifier
circuits
Multiple amplifier sizes (up to 7 per enclosure)
Maintains full supervision during battery
operation
Digitized voice capability
Microprocessor based operations
•
•
•
•
•
•
•
Fire fighter telephone handsets
Mircom’s Fire Fighter Telephones are designed to operate in conjunction with Mircom’s QX-5000 Series
Emergency Zoned Audio System. These telephone handsets are permanently installed throughout a
building to allow Fire Fighters easy communication with the main control panel.
•
•
•
•
Heavy-duty construction
Red finish
Flush or surface mount
Key-locked door
•
•
•
•
Break glass insert
Rugged ABS plastic handset
Portable handsets also available
Addressable module available
Fire-Link by Mircom
Fire-Link - An advanced retro fit audibility solution
Fire-Link by Mircom supplements the signalling capabilities of a building’s existing fire alarm system. By utilizing
the building’s existing 120 VAC wiring, Firelink can satisfy stringent audibility requirements without the cost,
mess and time associated with traditional retrofits.
•
•
•
•
•
•
Reduces labour from two man months to one man
day on a typical fifty suite installation
No drilling, coring or fishing of new wires
No surface raceway or electrical hardware
No need to upgrade the existing fire alarm system
No signal circuit isolator modules (in select areas)
Audible devices plug directly into an existing
AC outlet
•
•
•
•
Portable - Gets the sound where it is needed
Completely supervised and addressed to the suite number devices
Seamlessly connects to any existing fire alarm
panel
Tamper proof and child resistant signalling devices
5
Remote Annunciators
RA-200 Series Remote led annunciators
The RA-200 Series Remote Annunciators are multiplexed annunciators that provide cost effective control,
status indication of common control functions and LED annunciation.
•
•
•
Available in eight and sixteen zone models
Equipped with a keyswitch which allows for
enabling and disabling of the common control functions
Bi-colored LEDs
•
•
•
LED indicators for AC On, Common Trouble
and Signal Silenced
Each point can be identified by the
corresponding label beside the LED
Mounts in a 4-gang electrical box by others
RAM-300LCD SERIES REMOTE LCD ANNUNCIATORS
The RAM-300LCD provides remote LCD annunciation through a 2 line by 20 character LCD display.
The RAM-300LCD provides control switches as well as a numeric keypad to access the menu functions.
•
•
•
2 line by 20 character LCD display
LED indicators for AC On, Alarm, Supervisory,
Trouble and CPU Fail
Common control functions can be disabled
on a per function basis
•
•
Available in a white enclosure
For use with the FA-300 and FX-350 Series Panels
RA-1000 Series REMOTE LCD ANNUNCIATORS
The RA-1000 Series Remote Annunciators are multiplexed annunciators that provide control, indication
of common annunciator functions and LED annunciation.
•
•
•
•
Large capacity of annunciation
Bi-colored LEDs
Slide-in labels for each display point
Surface mount to standard gang outlet boxes
•
•
Sealed membrane buttons and LED indicators
Local Buzzer, Silence and Lamp Test switches
Manual Pull Stations
MS-400 Series MANUAL PULL STATIONS
Attractive and durable, Mircom’s MS-400 Series Pull Stations provide manual fire reporting. The MS-400 Series
Pull Stations are non-coded, single action devices which initiate an alarm when pulled.
•
•
•
•
Durable extruded aluminum construction
Attractive, low profile design
Standard single gang mount
Glass rod optional
MS-700U Series MANUAL PULL STATIONS
Mircom’s MS-700U Series Manual Pull Stations provide manual fire reporting. These high quality, die-cast metal
pull stations are available in either single or dual action configurations with SPST contacts and terminal strip
connections. All models are available with key resets, terminal connectors, SPST gold contacts and CAT-30
lock and keys.
•
•
•
Single or Dual Action
Key resettable
Terminal connectors
•
Available in english and bilingual versions
MS-700U Series emergency PULL STATIONS
Mircom’s MS-700U Series Emergency Pull Stations are high quality, die-cast metal pull stations that are
designed to meet special use requirements. The MS-700U Series are designed for indoor and outdoor use.
•
•
•
6
Single Action
Key resettable
High-gloss enamel in blue and yellow
•
•
Normally open or normally closed alarm
contacts
Two form “C” contacts
Smoke And Heat Detectors
mir-65 Series SMOKE DETECTORS
The MIR-65 Series incorporate proven sensing technologies, together with advances in materials and
electronics technology. Having a wide operating voltage of 9-33VDC, the MIR-65 Series detectors can
be integrated into most Fire/Security systems. The MIR-65 Series wide voltage range family consists of
photoelectric smoke, ionization smoke, and heat detectors.
•
•
•
2 and 4-wire bases
Advanced electronic technology
Proven detection performance
•
•
•
UL listed
Wide operating voltage
Available in 2 and 4-wire kits
mdh-sl2000 Series DUCT DETECTORS
The MDH-SL2000 Series Duct Smoke Detectors are available in 2 and 4-wire ionization and photoelectric
models. The MDH-SL2000 Series Duct Smoke Detectors are the latest innovation for early detection of smoke
and products of combustion present in air moving through HVAC ducts in commercial, industrial
and residential applications.
•
•
•
•
Photoelectric and Ionization models
2 and 4-wire models
Universal voltage
Listed for high temperature applications
•
•
•
•
Listed for velocities between 100-4000 ft./min
Low flow technology
Magnet test capability
Large terminal connection screws
FireRay Reflective Beam Smoke Detector
The system comprises of a single unit incorporating an infra-red transmitter and receiver. The signal generated
in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence
of smoke. The internal microprocessor determines an alarm condition when a predetermined level is reached.
•
•
•
•
Easy set up and alignment
Single Compact Housing
Calibrated obscuration test filter included
Microprocessor controlled
•
•
•
•
Alarm latching or auto reset
Automatic gain control
12 VDC or 24 VDC operation
Separate alarm and trouble contacts
i3 Series Photoelectric Smoke Detectors
The i3 Series Smoke Detectors represent a significant advancement in conventional detection. The i3 family is
founded on three principles: Installation Ease, Intelligence, and Instant Inspection and is available in Standard,
Sounder, Auxiliary Form C Relay and Isolated Thermal models.
•
•
•
•
Plug-in detector line - mounting base included
Large wire entry port
In-line terminals with SEMS screws
Stop-Drop ‘N’ LockTM attachment to base
•
•
•
Built-in remote maintenance signalling
Wide angle, dual color LED indication
Built-in test switch
DH-100 Series Duct Smoke Detectors
The DH-100 Series Duct Smoke Detectors are available in 2 and 4-wire ionization and photoelectric
models. Designed for simplified installation and easy maintenance, the DH-100 Series Duct Smoke
Detectors feature low flow technology which enables duct smoke detection throughout a broad range
of airflow environments.
• Telescoping sampling tube
• Low flow technology
• 2 and 4-wire models
• Ionization and Photoelectric models
• Outside mounting tabs
• Textured cover for visual inspection
• 12/24 VDC operation
• Remote annunciator option
BEAM1224 Series Beam Smoke Detectors
The BEAM1224 is a 4-wire conventional projected beam smoke detector. It is uniquely suited for protecting
open areas with high ceilings where other methods of smoke detection are difficult to install and maintain.
It is to be used with UL/ULC listed compatible control panels only.
•
•
•
•
16 to 328 foot protection range
Single-ended, reflective design
User friendly alignment procedure
6 user selectable sensitivity levels
•
•
Digital display for easy alignment
Built-in automatic gain control compensates for signal deterioration from dust build-up
7
Heat Detectors
MIR-600 Series Heat Detectors
The MIR-600 Series Heat Detectors are attractive, durable and feature combination rate-of-rise and fixed
temperature operation in both 135°F (57°C) and 200°F (93°C) temperature ratings.
•
•
•
•
Rate-of-Rise and Fixed Temperature
One or two circuit, normally open
Easy installation
Low profile
•
•
•
Visual indication
Operation testing
Complimentary low profile white exterior finish
mir-cr/cf -135 Series heat DETECTORS
The MIR-CR/CF-135 Series Heat Detectors are reliable, durable and feature combination rate-of-rise and
fixed temperature operation in both 135°F (57°C) and 200°F (93°C) temperature ratings.
•
•
•
Dual Action Rate-of-Rise & Fixed Temperature
Detects Rate of Ambient temperature rise of 8°C (15°F)
Complimentary white exterior finish
•
•
Easy installation
Detectors operating on fixed temperatures are
only available in two settings of 135°F (57°C) or 200°F (93°C)
CR/CF-MP Series Moisture Proof Heat Detectors
The CR and CF-MP Series Moisture Proof Detectors are designed for hazardous locations and Moisture Proof
applications. Each Moisture Proof detector is available in single or multiple circuits with open and/or closed
contact configurations. The CR and CF-MP heat detectors are available in rate-of-rise and fixed temperature
operation in both 135°F (57°C) and 200°F (93°C) temperature ratings.
•
•
Dual Action Rate-of-Rise & Fixed Temperature
Detectors operating on fixed temperatures are
only available in two settings of 135°F (57°C) or 200°F (93°C)
•
•
Detects Rate of Ambient temperature rise of 8°C (15°F)
Clear-anodized aluminum finish
CR/CF-EWT Series Explosion-Proof Heat Detectors
The CR/CF-EWT series of fire alarm Heat Detectors provide reliable fire detection in areas which are classified
as hazardous. They are UL/ULC listed for hazardous location Class I, Groups C and D; Class II, Groups E, F
and G; Class III Weatherproof, Water-tight and Dust-tight applications covered by Special Purpose Enclosures
III, IV and V.
•
•
•
•
Wire Leads/Sealed Connection
Rate-of-Rise and/or Fixed Temperature
Single Pole - Normally Open Contact
Low Profile
•
•
Models available in 135°F (57°C) or 200°F (93°C)
Weatherproof, water-tight and dust-tight
Series 500 Special Assembly Heat Detectors
The Series 500 Special Assembly Heat Detectors are designed for use in applications requiring protection
against weather, moisture (internal condensation), and explosive atmospheres. The Series 500 consist of
the WPB/MPB Weather/Moisture Proof models and the EPB/MPB Explosion/Moisture Proof models.
•
•
•
8
Weather/Moisture Proof models
Explosion/Moisture Proof models
One Circuit, Normally Open
•
Models available with rate-of-rise and/or fixed temperature detection
Visual Signals
FS-240 SELECT-A-STROBE Series
The FS-240 Select-A-Strobe Series features a unique candela intensity field selector switch for alternating the candela output from 15cd to 30cd (75cd on axis).
•
•
Strobe with two field selectable settings of
15/75 or 30/120cd
All models mount to 4 inch square, single gang,
double gang or octagon backbox
•
•
•
Available in red or white housing
Universal mounting plate included
with each unit
Select models available in 110cd
FHS-240 SELECT-A-HORN/STROBE Series
The FHS-240 Select-A-Horn/Strobe Series features a unique candela intensity field selector switch for
alternating the candela output from 15cd to 30cd (75cd on axis). The Horn provides two different field
selectable tones, and a High/Low output setting that can be achieved with the use of mini jumpers located
on the back of the unit.
•
•
•
Universal mounting plate included with
each unit
All models mount to 4 inch square, single
gang, double gang or octagon backbox
Available in red or white housing
•
•
•
Strobe with two field selectable settings
of 15/75cd or 30/120cd
Tamper-proof candela selector switch
Select models available in 110cd
Series AS/AH Multi-Candela Horn/Strobes
The Series AS and AH are Multi-Candela Horn/Strobes that are designed for maximum performance, reliability
and cost-effectiveness. The Series AS and AH are ideal for 2-wire applications and are available in wall and
ceiling mount models.
•
•
Selectable continuous horn or temporal (Code 3)
Three selectable dBA settings of 90, 95 and 99 dBA in both tones
•
•
Patented universal mounting plate
Wall and ceiling mount
Series NS/NH Multi-Candela Horn/Strobes
The Series NS and NH are designed for maximum performance, reliability and cost-effectiveness while meeting
or exceeding the latest requirements of NFPA 72/ANSI 117.1/UFC and UL Standards 1971 and 464 as well as
meeting ADA requirements concerning photosensitive epilepsy.
•
•
•
Selectable 15, 30, 75 or 110 candela strobe
2 and 4-wire models
Two selectable tones and dB levels
•
•
•
Patented universal mounting plate
24 VDC models
Wall mount
Series RSS Strobes
The Series RSS Strobes provide a wide range of intensities and mounting options for wall or ceiling applications.
The Series RSS Strobes have a lower current draw while maintaining outstanding performance, reliability and
cost effectiveness. These versatile appliances will satisfy virtually all requirements for indoor, wall or ceiling mount
applications.
•
•
Wall mount multi-candela models are available
with field selectable candela settings of 15/30/
75/110cd or 135/185cd
Single candela models are available with
candela settings of 15/75cd
•
Ceiling mount multi-candela models are
available with field selectable candela settings
of 15/30/75/95cd or 115/177cd
9
Audible Devices
fh-240 SELECT-A-HORN Series
The FH-240 Select-A-Horn Series are audible signalling appliances designed for use in areas such as
apartments, hotels and offices. The Horn provides two different field selectable tones, and a High/Low
output setting that can be achieved with the use of mini jumpers located on the back of the unit.
•
•
24 VDC with two field selectable settings
All models mount to 4 inch square, single
gang, double gang or octagon backbox
•
•
Universal mounting plate included with
each unit
Available in red or white housing
FH-45/FH-47 Series Speakers
The FH-45/FH-47 Series fire alarm speakers are designed to generate attention grabbing tones and voice
commands for emergency signalling evacuation applications. The round and square speakers are available
in red or white housing.
•
•
FH-45 Series feature field selectable taps from
2 to 8 watts
Available in 25 and 70 VRMS models
•
•
FH-47 Series feature field selectable taps from
1/4 to 2 watts
Available in red or white housing
SFH-45/SFH-47 Series Speaker Strobes
The SFH-45/SFH-47 Series fire alarm speaker strobes are designed to generate attention grabbing tones and
voice commands for emergency signalling evacuation applications. The round and square speaker strobes are
available in red or white housing.
•
•
SFH-45 Series feature field selectable taps from
2 to 8 watts
SFH-47 Series feature field selectable taps from
1/4 to 2 watts
•
•
•
Models available with candela output of 15/75
to 30/120cd and 75 to 110cd
Available in 25 and 70 VRMS models
Available in red or white housing
Series E50 Speakers and Speaker Strobes
The Series E50 Speakers and Speaker/Strobes are designed for high efficiency sound output with field
selectable input voltage (25/70 VRMS) and field selectable taps from 1/8 to 2 watts. These units are also
designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems.
•
•
Multi-candela models are available with field
selectable candela settings of 15/30/75/110cd
or 135/185cd
Single candela models are available with
candela settings of 15/75cd
•
•
•
Field selectable taps for 25 or 70 VRMS
operation from 1/8 to 2 watts
Available in red or white housing
Square wall mount speaker strobes
Series E60 Speakers and Speaker Strobes
The Series E60 Speakers and Speaker/Strobes are designed for high efficiency sound output with field
selectable input voltage (25/70 VRMS) and field selectable taps from 1/8 to 2 watts. These units are also
designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems.
•
•
Round ceiling mount speaker strobes
Multi-candela models with field selectable
candela settings of 15/30/75/95cd or
115/177cd
•
•
Field selectable taps for 25 or 70 VRMS
operation from 1/8 to 2 watts
Available in red or white housing
MH-25 Series MINI-HORNS
The MH-25 Series Mini Horns are compact electronic alarm appliances that are ideal for alarm signalling
in individual rooms, apartments, hotels and offices where attractive appearance and dependable
performance are prime concerns.
•
•
•
•
10
24 VDC models with wide listed voltage range
Mounts into standard single gang box
Silenceable versions available
High sound output for enhanced audibility
(over 90 dBA at 10 ft) @ 24 VDC
•
•
•
Silence button allows the user to silence the
mini-horn for a max. of 10 minutes
Red LED to indicate “active signal circuit” on silenceable versions
Available in red or white finish
Fire Alarm Accessories
DTC-300A Standalone Digital Communicator
The DTC-300A Digital Alarm Communicator Transmitter/Dialer Module can connect to any Fire Alarm Control
Panel with 24 VDC output power. It can transmit Alarm, Supervisory, Waterflow Alarm, Common Trouble,
AC Power Trouble and Battery Trouble information on two telephone lines to a Digital Alarm Communicator
Receiver (DACR).
•
•
Transmits Common Alarm, Common
Supervisory, Common Waterflow Alarm,
Common Trouble, AC Power Trouble and
Battery Trouble information on two telephone lines
Programmable for the Ademco Contact ID and SIA-DCS protocols
•
•
•
•
Remote programming and history log retrieval
Tone or Pulse dialing
Power and battery standby from the fire alarm control panel
Connects to any 24 VDC fire alarm control
panel
BPS-SERIES nac power extenders
The BPS Series are extremely cost effective voltage regulated remote NAC Power Extenders. They may be connected
to any 12 or 24 Volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit
(NAC) expansion (supports ADA requirements) and will provide auxiliary power to support system accessories.
•
•
•
•
Two Class A/Class B input circuits
Two Class A/Four Class B indicating circuits
One Aux. Power Output @ 1 Amp supply
current (w/Battery Back Up)
Built-in battery charger supports Lead Acid or
Gel type batteries
•
•
•
Horn/Strobe Sync Protocols include: Mircom/
Amseco, Wheelock, Gentex, System Sensor
and Faraday
Available in 6.5, 8 and 10 Amp models
Two N.C. dry contact trigger inputs
Multi-Voltage Relay Modules
Mircom offers a wide variety of multi-voltage relays modules that are suitable for use with HVAC, Temperature
Control, Fire Alarm, Security, Energy Management and Lighting Control Systems.
•
•
•
Multi-voltage operation
Activation LEDs
Easy and flexible installation
•
•
Reliable and robust design
Multi-purpose field installation
electromagnetic door holders
The Electromagnetic Door Holders are constructed of the finest materials available. Each door holder is
made of durable die-cast metal and finished in a high lustre double chrome or brass plating for a high
quality appearance.
•
•
Models available in surface, semi-flush and
recess mount
Self-adjusting swivel catch-plate reduces
installation time and adjusts to door alignment
changes
•
•
•
•
•
Optional extension rods
Built-in transient protection
Floor mount units available
Dual voltage inputs
Low current draw
STI Stopper II
The STI Stopper II is designed to protect manual pull stations or push buttons against vandalism and false
fire alarms. It consists of a clear, tamper proof poly carbonate shield and frame that fit over manual pull
stations. The cover is connected to the frame by a cable. When the cover is lifted it drops off of the frame
and a horn will sound (models with horn).
•
•
Protection against physical damage, dust, grime
and severe environments
Helps stop false fire alarms without restricting
legitimate alarms
•
•
•
Cover is UV-stabilized against sun deterioration
Models available with a horn
Weather Stopper models available
11
a member of the
MIRCOM is the largest privately held independent designer
and manufacturer of Fire Alarm Life Safety and Telephone
Access products in North America.
CANADA
25 Interchange Way
Vaughan (Toronto), Ontario
L4K 5W3
Telephone: 905.660.4655
Fax: 905.660.4113
U.S.A.
60 Industrial Parkway
Cheektowaga (Buffalo), NY
14227
Telephone: 888.660.4655
Fax: 888.660.4113
Website: www.mircom.com
Email: mail@mircom.com
Distributed by:
FIRE-MIR-USA
REV00