152
1.
2.
3.
4.
5.
6.
7.
8.
9.
Abbasian, M, Fahimi, B & Moallem, M 2010, ‘High torque doublestator switched reluctance machine for electric vehicle propulsion’,
Vehicle Power and Propulsion Conference (VPPC), IEEE, pp. 1 - 5.
Arumugam, R, Lindsay, JF & Krishnan, R 1988, ‘Sensitivity of Pole
Arc/Pole Pitch ratio on Switched Reluctance Motor Performance’,
Proc. Conference Record of the IEEE Industry Applications Society
Annual Meeting, pp. 50 – 54.
Balamurugan, S 2007, ‘Vibration and Thermal Analysis of 6/4 Pole
Switched Reluctance Motor’, Ph.D. Thesis, in the Faculty of Electrical
Engineering, Anna University, Chennai.
Balamurugan, S & Sumathi, P 2004, ‘Analysis of Temperature Rise in
Switched Reluctance Motor Due to the Core and Copper Loss by
Coupled Field Finite Element Analysis’, Int. Conference on
POWERCON, Singapore, pp. 630-634.
Byrne & Lacy J C 1976, ‘Electromagnetic system comprising a variable reluctance machine’, US patent 3.956.678.
Cakir, K & Sabanovic, A 2006, ‘In-Wheel motor design for electric vehicles’, 9th International workshop on Advanced Motion control,
2006, pp. 613-618.
Calverley, SD, Jewell, GW & Saunders, RJ 2000, ‘Aerodynamic losses in switched reluctance machines’, IEE Proc. On Electrical Power
Applications, vol.147, no.6, pp 443-448.
Chayopitak, N, Pupadubsin, R, Tungpimolrut, K, Somsiri, P,
Jitkreeyan, P & Kachapornkul, S 2008, ‘An adaptive low-ripple torque control of switched reluctance motor for small electric vehicle’,
International Conference on Electrical Machines and Systems, ICEMS
2008. pp. 3327-3332.
Chia-Chang Tong & Wu-Shun Jwo 2007, ‘An assist-mode hybrid electric motorcycle’, Journal of power sources, vol.174, pp.61-68.

153
10.
Chauveau, E, Zaïm, ME, Saïdi, T, Trichet, D & Fouladgar, J, 2002,
‘Magneto-Thermal Modeling of Induction Machines Using Inverse
Problem Methodology’, Journal of Physics. Vol. III, pp.1849-1859.
11.
Cinar, MA & Kuyumcu, FE 2007, ‘Design and drives simulation of an in-wheel switched reluctance motor for electric vehicle applications’
IEEE International Electric Machines and Drives Conference,
IEMDC'07., vol. 1, pp. 50-54.
12.
Colby, RS, Mottier, M & Miller TJE 1996, ‘Vibration modes and acoustic noise in a 4-phase switched reluctance motor’, IEEE
Transactions on Industry Applications, vol. 32, no. 6, pp. 1357-1364.
13.
Desai, PC, Krishnamurthy, M, Schofield, N & Emadi, A 2010,
‘Novel switched reluctance machine configuration with higher number of rotor poles than stator poles: concept to implementation ’, IEEE
Transactions on Industrial Electronics vol. 57, no. 2 , pp. 649 - 659.
14.
Dessouky, YG, Williams, BW & Fletcher, JE 1998, ‘Cooling enhancement of electric motors’, IEE Proc. Electrical Power
Applications, vol.145, no. 1.
15.
Fulton, NN 1993, ‘SR drives for battery electric traction-A comparative assessment’, Motors and Drives for Battery Powered
Propulsion, IEE Colloquium, pp. 4/1 - 4/7.
16.
Inderka, RB, Menne, M & De Doncker, RWAA 2002, ‘Control of switched reluctance drives for electric vehicle applications ’, IEEE
Transactions on Industrial Electronics vol. 49, no. 1, pp. 48-53.
17.
Iqbal Husain 2002, ‘Minimization of Torque Ripple in SRM Drives’,
IEEE Transactions on Industrial Electronics, vol.49, no. 1, pp. 28-39.
18.
Jawad Faiz, Babak Ganji, Carstensen & Kasper Doncker 2009,
‘Temperature Rise Analysis of Switched Reluctance Motors Due to
Electromagnetic Losses’, IEEE Trans on Magnetics, vol. 45, no. 7, pp. 2927-2934.
19.
Jian Li, Xueguan Song & Yunhyun Cho 2008, ‘Comparison of 12/8 and 6/4 Switched Reluctance Motor: Noise and Vibration Aspects’,
IEEE Transactions on Magnetics, vol. 44, no. 11, pp. 4131-4134.

154
20.
Jiongkang Lin, Cheng, KWE, Zhu Zhang & Xiangdang Xue 2009,
‘Experimental investigation of in-wheel switched reluctance motor driving system for future electric vehicles ’, PESA 2009. 3rd
International Conference on Power Electronics Systems and
Applications, pp. 1-6.
21.
Joon-Ho Lee, Young-Hwan Lee, Dong-Hun Kim, Ki-Sik Lee & H-
Han Park 2002, ‘Dynamic Vibration Analysis of Switched Reluctance
Motor Using Magnetic Charge Force Density And Mechanical
Analysis’, IEEE Transactions on Applied Superconductivity, vol. 12, no. 1, pp. 1511-1514.
22.
Jung-Pyo Hong, Kyung-Ho Ha & Ju Lee 2002, ‘Stator Pole and Yoke
Design for Vibration Reduction of Switched Reluctance Motor’, IEEE
Transactions on Magnetics, vol. 38, no. 2, pp.929-932.
23.
Kamalakannan, C, Kamaraj, V, Paramasivam, S & Paranjothi, SR
2011, ‘Switched reluctance machine in automotive applications - a technology status review’, 1st Int. Conference on Electrical Energy
Systems (ICEES), 2011, pp. 187-197.
24.
Krishnan, R 2001, ‘Switched Reluctance Motor Drives: Modeling,
Simulation, Analysis, Design, and Applications’, CRC Press.
25.
Krishnan, R., Arumugam, R. and Lindsay, J.F., 1988, May/June,
“Design Procedure for Switched- Reluctance Motors”, IEEE
Transactions on Industry Applications , vol. 24, No. 3, pp.456-461.
26.
Labak, A & Kar, NC 2009, ‘A novel five-phase pancake shaped switched reluctance motor for hybrid electric vehicles’, published in
IEEE Vehicle Power and Propulsion Conference. VPPC '09.pp. 494-
499.
27.
Lin D, Zhou P, Stanton S & Cendes ZJ 2009, ‘An analytical circuit model of Switched Reluctance Motors’, IEEE Transactions On magnetics, vol.45, no., 12, pp. 5368-5379.
28.
Low TS, Lin H, Chen SX & Chang KT 1995, ‘Design and analysis of four phase (In-hub) mini-switched reluctance motor for spindle motor in hard disc drive’, Proceedings of International Conference on Power
Electronics and Drive Systems, vol.2, pp.645-650.

155
29.
Luk, PCK & Jinupun, P 2006, ‘An in-wheel switched reluctance motor for electri vehicles’, IEEE 5th international Power electronics and motion control conference, IPEMC 2006. CES., vol. 3, pp. 1-5.
30.
Mehrdad Ehsani, Khwaja M Rahman & Hamid A.Toliyat 1997,
‘Propulsion system design of electric and hybrid vehicles’, IEEE
Transactions on Industrial Electronics, vol. M. 44, no.1.
31.
Miller THE 1993, ‘Switched Reluctance motor drives and their control’, Magna Physics Publishing and Clarendons Press, Oxford.
32.
Ng, T. W.; Cheng, K. W. Eric; Xue, Xiangdang 1999, ‘Computation of the in-wheel switched reluctance motor inductance using finite element method’, International Conference on Power Electronic Systems and
Applications : 20th-22nd May 2009, p. [1-4].
33.
Petrus, V, Pop, AC, Martis, CS, Gyselinck, J & Iancu, V 1995,
‘Design And Comparison Of Different Switched reluctance Machine
Topologies For Electric vehicle propulsion’, XIX International
Conference on Electrical Machines (ICEM), pp. 1-6.
34.
Pragasen Pillay & William (Wei) Cai 1999, ‘An Investigation into
Vibration in Switched Reluctance Motors’, IEEE Transactions on industry Applications, vol. 35, no. 3, pp 589-596.
35.
Praveen Vijayaragavan 2001, ‘Design of Switched Reluctance Motors and Development of a Universal Controller for Switched Reluctance and Permanent Magnet Brushless DC Motor Drives’, PhD Thesis.
36.
Praveen Vijayraghavan & Krishnan R 1999, ‘Noise in electric
Machines: A Review’, IEEE Transactions on Industry Applications -
35, no. 5, pp. 1007-1013.
37.
Jung-Pyo Hong , Kyung-Ho Ha & Ju Lee 2002, ‘Stator Pole and Yoke
Design for Vibration Reduction of Switched Reluctance Motor ’, IEEE
Transactions on Magnetics , vol. 38, no. 2, pp. 929-932.
38.
Radun, V 1995, ‘Design Considerations for Switched Reluctance
Motor’, IEEE Transactions on Industry Applications, vol.31, no. 5, pp.
1079-1087.

156
39.
Ramamurthy, SS & Balda, JC 2001, ‘Sizing a switched reluctance motor for electric vehicles’, IEEE Transactions on Industry
Applications, vol. 37, no. 5, pp. 1256-1264.
40.
Roger C, Becerra & Mehrdad Ehsani 1993, ‘Commutation of SR motors’, IEEE Transactions on Power Electronics, vol.8, no. 3, pp.
257-263.
41.
Roy S. Colby, Francois M. Mottier & Timothy J.E. Miller 1996,
‘Vibration Modes And Acoustic Noise In A Four Phase Switched
Reluctance Motor’, IEEE Transactions on Industry Applications, vol.
32, no. 6, pp.1357-1364.
42.
Saari, J, 1998, ‘Thermal Analysis of High-Speed Induction Machines’,
Acta Polytechnica Scandinavica, Electrical Engineering Series No. 90,
Published by the Finnish Academy of Technology, Helsinki.
43.
Shingo Inamura, Tomokazu Sakai & KoichiroSawa, ‘A Temperature
Rise Analysis of Switched Reluctance Motor Due to the Core and
Copper Loss by FEM’, IEEE Transactions on Magnetics, vol. 39, no.3.
44.
Smaka, S, Masic, S, Cosovic, M & Salihbegovic, I 2010, ‘Switched reluctance machines for hybrid electric vehicles’, 2010 XIX
International Conference on Electrical Machines (ICEM), pp. 1 - 6,
ICEM 2010, Rome.
45.
Srinivas, KN & Arumugam, R 2004, ‘Static and Dynamic vibration analyses of Switched Reluctance Motors Including Bearings, Housing,
Rotor Dynamics, and Applied Loads’, IEEE Transactions On
Magnetics, vol. 40, no.4, pp. 1911-1919.
46.
Srinivas, KN & Arumugam, R 2005 (a), ‘Analysis and
Characterization of Switched Reluctance Motors: Part-I Flow,
Thermal, and Vibration Analyses’, IEEE Trans. On Magnetics, vol. 41, no. 4, pp.1306-1320.
47.
Srinivas , KN & Arumugam , R 2005 (b), ‘Analysis and
Characterization of Switched Reluctance Motors: Part II—Flow,
Thermal, and Vibration Analyses’, IEEE Transactions on Magnetics, vol. 41, no. 4, pp.1321-1332.

157
48.
Wei Cai, Pragasen Pillay & Zhangjun Tang 2002, ‘Impact of stator windings and end-bells on resonant frequencies and mode shapes of switched reluctance motors’, IEEE Transactions on Industry
Applications, vol.38, no. 4, pp. 1027-1036.
49.
Wei Cai, Pragasen Pillay, Zhangjun Tang, & Avoki M. Omekanda
2003, “Low-Vibration Design of Switched Reluctance Motors for
Automotive Applications Using Modal Analysis”, IEEE Transactions on industry applications, vol. 39, no. 4, pp.971-977.
50.
Wei Xu, Jianguo Zhu, Youguang Guo, Shuhong Wang, Yi Wang &
Zhanghai Shi 2009, ‘Survey on electrical machines in electrical vehicles’, Applied Superconductivity and Electromagnetic Devices,
Applied Superconductivity and Electromagnetic Devices, pp. 167-
170, ASEMD.
51.
Weschta, Alois 1993, ‘Power converters with IGBTs for the new light rail vehicle for the City of Frankfurt’, Power Electronics and
Applications, Fifth European Conference on, vol.5, pp. 229-234.
52.
William (Wei) Cai & Pragasen Pillay 2001 , ‘Resonant Frequencies and
Mode Shapes of Switched Reluctance Motors’, IEEE Transactions on
Energy conversion, vol. 16, no. 1, pp.43-48.
53.
Wu, Y & Pollock, C 1993, ‘Time domain analysis of vibration and acoustic noise in the switched reluctance drive’, in IEE I993 Int. con
Electric Machines and Drives, pp. 558-563.
54.
Xue, XD, Cheng, KWE, Ng, TW & Cheung, NC 2010, ‘Multiobjective optimization design of in-wheel switched reluctance motors in electric vehicles’, Industrial Electronics, IEEE Transactions on vol.
57, no. 9, pp. 2980-2987.
55.
Yifan Tang 1997, ‘Characterization, Numerical Analysis, and Design of Switched Reluctance Motors’, IEEE Transaction on Industry
Applications, vol. 33, no. 6, pp. 1544-1552.
56.
Zhang Qianfan, CuiShumei & TianXinjia 2007, ‘Hybrid switched reluctance motor applied in electric vehicles’, Vehicle Power and
Propulsion Conference 2007, pp. 359-363.

158
57.
Zhangjun Tang, Pillay, P, Omekanda, AM, Chen Li & Cetinkaya C
2003, ‘Measurement of Young's modulus for switched reluctance motor vibration determination’, Electric Machines and Drives IEEE
International Conference - IEMDC.
58.
Zhou P, Stanton S & Cendes ZJ 2009, ‘An Analytical Circuit Model of
Switched Reluctance Motors’, IEEE Transactions on Magnetics, vol.45, no.12, pp. 5368-5375.