Tariff Concessions
advertisement
Tariff Description =========================================================================== 7407.10.00 7407.21.00 BARS AND/OR RODS AND/OR PROFILES, copper Op. 10.08.2005 Dec. 04.11.2005 - TC 0510518 BARS AND/OR RODS AND/OR PROFILES, brass Op. 10.08.2005 Dec. 04.11.2005 - TC 0510519 7407.21.00 BRASS BARS, round and/or hexagonal, having a maximum dezincification of 50 microns in accordance with ISO 6509 Op. 21.09.2005 Dec. 16.12.2005 - TC 0512270 7407.29 BARS AND RODS, beryllium-copper Op. 13.03.1984 Dec. 13.03.1984 - TC 8343244 RODS, phosphor bronze Op. 13.03.1984 - TC 8437001 7407.29 Dec. 01.01.1988 7407.29 COPPER-ALUMINIUM (aluminium-bronze) bars and rods, certified to specification DGS1043 grades 1 and 2 Op. 18.03.1991 Dec. 09.10.1991 - TC 9102880 7407.29.00 ROD, welding, copper-nickel, to AWS specification A5.7 class ER Cu Ni Op. 01.01.2007 Dec. 13.11.2006 - TC 0614225 7408.11.00 WIRE OR ROD, refined copper, coiled, Electrolytic Tough Pitch (ETP), having ALL of the following: (a) NOT less 99.78% by weight of copper; (b) oxygen content NOT less than 50 ppm; (c) diameter NOT less than 6.0 mm and NOT greater than 11.0 mm Op. 24.01.2014 Dec. 23.04.2014 - TC 1403814 7408.11.00 COPPER EXTRUSION, in coil form, extruded, annealed, solid rectangular cross-section whether or not including rounded edges or corners, having BOTH of the following: (a) thickness NOT less than 2 mm; (b) width NOT less than 15.5 mm Op. 16.08.2007 Dec. 02.11.2007 - TC 0713009 7408.19.00 WIRE, solder plated, having ALL of the following: (a) core wire NOT less than 99.90% Cu; (b) wire thickness NOT less than 0.05 mm and NOT greater than 0.50 mm; (c) wire width NOT less than 1.00 mm and NOT greater than 6.00 mm; (d) thickness of solder plate NOT less than 10 microns and NOT greater than 40 microns Op. 11.06.2013 Dec. 02.09.2013 - TC 1319226 7408.19.00 WIRE, plated soft annealed copper, having ALL of the following: (a) base of oxygen free high conductivity (OFHC) copper; (b) plating composed of 60% tin / 40% lead with a bright finish; (c) plate thickness of 500 micro inches (+ or - 1 micro inches) Op. 12.12.1995 Dec. 01.04.1996 - TC 9600316 7408.21 WIRE, brass, whether or not galvanic zinc coated, but NOT otherwise coated, having BOTH of the following: (a) OD NOT exceeding 0.301 mm; (b) tolerance + or - 1 micron Op. 10.05.1988 Dec. 14.08.1989 - TC 8804497 7408.21.00 BRASS WIRE, C 2600 Grade, diameters NOT less than 1.2 mm and NOT greater than 9 mm Op. 05.12.2005 Dec. 03.03.2006 - TC 0516748 Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 7408.22 7408.22 7408.22.00 WIRE, nickel silver Op. 13.03.1984 Dec. 13.03.1984 - TC 8437015 WIRE, welding, copper nickel, to AWS Specification A5.7, Class ER Cu Ni Op. 01.02.1989 Dec. 03.04.1989 - TC 8900696 WIRE, DEOXIDISED COPPER ALLOY 189, MIG WELDING Op. 04.04.2000 Dec. 31.05.2000 - TC 0003490 7408.29 WIRE, alloy, containing aluminium, copper and nickel Op. 13.03.1984 Dec. 13.03.1984 - TC 8437002 7408.29 WIRE, welding, being EITHER of the following: (a) silicon bronze; (b) aluminium bronze Op. 13.03.1984 Dec. 13.03.1984 - TC 8437004 WIRE, phosphor bronze Op. 13.03.1984 Dec. 13.03.1984 - TC 8437016 WIRE, deoxidised copper Op. 01.02.1988 Dec. 15.04.1988 - TC 8801463 7408.29 7408.29 7409.11 COPPER COIL REFINED, being EITHER of the following: (a) any width exceeding 100 mm, having a thickness greater than 1.5 mm; (b) having a width exceeding 599 mm, with a thickness greater than 0.15 mm but NOT exceeding 1.5 mm Op. 20.06.1990 Dec. 05.09.1990 - TC 9004418 7409.11.00 COPPER PLATES AND/OR SHEETS AND/OR STRIP, thickness greater than 0.15 mm Op. 02.11.2004 Dec. 07.01.2005 - TC 0411355 7409.19 REFINED COPPER, sheets and plates having a thickness exceeding 0.15 mm, but NOT including ANY of the following: (a) goods having a width of 200 mm or less combined with a maximum width to thickness ratio of 50:1; (b) goods having a width of 260 mm or less combined with a maximum width to thickness ratio of 25:1 Op. 20.06.1990 Dec. 05.09.1990 - TC 9004417 7409.19.00 MOULD PLATES AND/OR CENTRE BLOCKS, SLAB CASTER Op. 20.10.2000 Dec. 05.01.2001 - TC 0008865 7409.19.00 COPPER PLATES AND/OR SHEETS AND/OR STRIP, thickness greater than 0.15 mm Op. 02.11.2004 Dec. 07.01.2005 - TC 0411356 7409.19.00 TRANSITION JOINTS, BIMETAL, copper and aluminium, explosion bonded Op. 21.02.2005 Dec. 06.05.2005 - TC 0502282 7409.21.00 STRIP, brass, complying with BOTH of the following: (a) specification UNS C68800; (b) composition: copper 73% to 74.5%, aluminium 3% to 4%, cobalt 0.25% to 0.55%, balance zinc Op. 10.03.1993 Dec. 11.06.1993 - TC 9308709 7409.21.00 COIL, BRASS, to a thickness NOT exceeding 0.20 mm Op. 17.01.1997 Dec. 25.03.1997 7409.21.00 - TC 9700517 PLATES AND/OR SHEETS AND/OR STRIP, of copper-zinc base alloys, thickness greater than 0.15 mm Item 50 applies unless otherwise stated. Tariff Description =========================================================================== Op. 02.11.2004 Dec. 07.01.2005 - TC 0411357 7409.29 BRASS SHEETS AND PLATES, having a thickness exceeding 0.15 mm, but NOT including goods having a width of 200 mm or less combined with both a maximum width to thickness ratio of 40:1 and length of 10 m or less Op. 20.06.1990 Dec. 05.09.1990 - TC 9004415 7409.29.00 PLATES AND/OR SHEETS AND/OR STRIP, of copper-zinc base alloys, thickness greater than 0.15 mm Op. 02.11.2004 Dec. 07.01.2005 - TC 0411358 7409.31.00 PLATES AND/OR SHEETS AND/OR STRIP, of copper-tin base alloys, thickness greater than 0.15 mm Op. 02.11.2004 Dec. 07.01.2005 - TC 0411359 7409.39 BRONZE SHEETS AND PLATES, having a thickness exceeding 0.15 mm Op. 04.06.1990 Dec. 05.09.1990 - TC 9004406 7409.39.00 PLATES AND/OR SHEETS AND/OR STRIP, of copper-tin base alloys, thickness greater than 0.15 mm Op. 02.11.2004 Dec. 07.01.2005 - TC 0411360 7409.40 NICKEL SILVER, leaded, in flat lengths or coils, having a minimum content of 1.0% of lead Op. 20.03.1984 Dec. 20.03.1984 - TC 8437023 7409.40 COPPER NICKEL SHEETS AND PLATES, having a thickness exceeding 0.15 mm Op. 04.06.1990 Dec. 05.09.1990 - TC 9004410 7409.40.00 PLATES AND/OR SHEETS AND/OR STRIP, of copper-nickel base alloys (cupro-nickel) OR copper-nickel-zinc base alloys (nickel silver), thickness greater than 0.15 mm Op. 02.11.2004 Dec. 07.01.2005 - TC 0411361 7409.90 STRIP, beryllium-copper Op. 20.03.1984 Dec. 20.03.1984 - TC 8437019 7409.90 COPPER ALLOY COIL, being EITHER of the following: (a) any width exceeding 100 mm, having a thickness greater than 1.5 mm; (b) having a width exceeding 599 mm, with a thickness greater than 0.15 mm but NOT exceeding 1.5 mm Op. 20.06.1990 Dec. 05.09.1990 - TC 9004411 7409.90 COPPER ALLOY, sheets and plates, having a thickness exceeding 0.15 mm, but NOT including goods having a width of 200 mm or less combined with both a maximum width to thickness ratio of 40:1 and length of 10 m or less Op. 20.06.1990 Dec. 05.09.1990 - TC 9004413 7409.90.00 COIN BLANKS, aluminium bronze Op. 28.04.1998 Dec. 10.07.1998 - TC 9803547 BLANKS, COIN, TOKEN OR MEDALLION Op. 20.08.1999 Dec. 29.10.1999 - TC 9906267 7409.90.00 7409.90.00 PLATES AND/OR SHEETS AND/OR STRIP, copper alloy, thickness greater than 0.15 mm Op. 02.11.2004 Dec. 07.01.2005 - TC 0411362 7410.11 COPPER FOIL, NOT backed, to a thickness NOT exceeding 0.15 mm Op. 10.10.1990 Dec. 17.01.1991 - TC 9008854 Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 7410.12 GOLD SCHLAG (ALSO KNOWN AS IMITATION GOLD OR DUTCH METAL) Op. 20.03.1984 Dec. 20.03.1984 - TC 8437032 7410.12 STRIP, beryllium copper, having a thickness of 0.15 mm or less Op. 02.07.1990 Dec. 11.10.1990 - TC 9005834 7410.12 COPPER ALLOY (BRASS) FOIL, NOT backed, to a thickness NOT exceeding 0.15 mm Op. 10.10.1990 Dec. 17.01.1991 - TC 9008853 7410.21.00 LAMINATES, copper clad Op. 04.02.1997 Dec. 11.04.1997 - TC 9700997 7410.21.00 LAMINATES, COPPER CLAD, copper thickness (excluding any backing) NOT exceeding 0.15 mm, having maximum operating temperatures in excess of 129 degrees C Op. 24.02.1997 Dec. 09.05.1997 - TC 9701624 7411.10.00 TUBES, copper, straight lengths, conforming to Australian Standard 1432-2004 (AS 1432-2004), having BOTH of the following: (a) outside diameter NOT less than 63 mm and NOT greater than 250 mm; (b) type A AND/OR B Op. 24.06.2015 Dec. 07.09.2015 - TC 1523445 7411.10.00 TUBES, copper, level wound coil, having BOTH of the following: (a) outside diameter NOT less than 6 mm and NOT greater than 25.4 mm; (b) wall thickness NOT less than 0.4 mm and NOT greater than 2.03 mm Op. 03.12.2013 Dec. 14.04.2014 - TC 1340099 7411.10.00 TUBES, COPPER, seamless, in coil form, having BOTH of the following: (a) integrally rolled inner grooved fins; (b) diameter NOT less than 9 mm and NOT greater than 16 mm Op. 12.12.2011 Dec. 06.03.2012 - TC 1141354 7411.10.00 TUBING, copper, solid drawn, finned, having ALL of the following: (a) copper to ASME specifications SB-75; (b) continuous integrally rolled fins (NOT welded OR mechanically attached) with thickness of 0.53 to 0.66 mm (inclusive); (c) overall fin diameter 39 to 54 mm (inclusive); (d) 270 to 300 fins per metre (inclusive); (e) tube internal diameter 15 to 22.5 mm (inclusive) AND wall thickness 1.00 to 1.9 mm (inclusive); (f) length from 4.9 m but NOT exceeding 8.0 m Op. 18.11.1994 Dec. 10.03.1995 - TC 9409113 7411.21 TUBING, Bourdon, conforming to BS 3127:1979, being brass 63/37 Alloy, oval elliptic, supplied in straight lengths which when bent to a curve, tend to straighten under internal pressure Op. 20.03.1984 Dec. 20.03.1984 - TC 8530838 7411.21.00 BRASS TUBING, having ALL of the following: (a) outside diameter NOT less than 15.88 mm and NOT greater than 25.40 mm; (b) wall thickness NOT less than 1.88 mm and NOT greater than 2.65 mm; (c) lead content NOT less than 2.5% and NOT greater than 3.5% Op. 08.12.2015 Dec. 22.02.2016 - TC 1544254 Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 7411.21.00 TUBES, brass, oval hollow section, solder coated, having ALL of the following: (a) oval height outside diameter NOT less than 10.00 mm; (b) oval width outside diameter NOT less than 1.80 mm; (c) wall thickness NOT less than 0.125 mm Op. 17.06.2014 Dec. 08.10.2014 - TC 1420586 7411.21.00 HOLLOWS, HEXAGONAL AND/OR OCTAGONAL, brass alloy Op. 05.07.2006 Dec. 29.09.2006 - TC 0611481 7411.21.00 TUBING, aluminium brass, having ALL of the following: (a) grade American Society for Testing and Materials (ASTM) B111 C-68700; (b) outside diameter NOT less than 12.7 mm and NOT greater than 38.1 mm; (c) wall thickness not less than 0.90 mm and NOT greater than 2.03 mm Op. 03.07.2006 Dec. 22.04.2008 - TC 0803870 7411.21.00 TUBES OR PIPES, brass, conforming to the American Society for Testing and Materials B111 C44300 (ASTM B111 C44300) Op. 20.11.2008 Dec. 27.02.2009 - TC 0840474 7411.21.00 TUBING, BRASS, butt welded, oval section, solder coated, having ALL of the following: (a) height NOT less than 15.00 mm; (b) crown diameter NOT less than 2.00 mm; (c) end diameter NOT less than 1.80 mm; (d) wall thickness NOT less than 0.125 mm Op. 19.02.1998 Dec. 15.05.1998 - TC 9801540 7411.22 TUBING, copper nickel 90/10 Alloy, dia exceeding 90 mm Op. 20.02.1986 Dec. 01.05.1986 - TC 8632551 7411.22.00 TUBES OR PIPES, copper-nickel alloy, having ALL of the following: (a) copper composition NOT less than 65% and NOT greater than 90%; (b) nickel composition NOT less than 5% and NOT greater than 35%; (c) diameter NOT less than 5 mm and NOT greater than 1 620 mm Op. 26.10.2010 Dec. 13.01.2011 - TC 1047741 7411.22.00 PIPES, copper-nickel alloy, having ALL of the following: (a) copper composition NOT less than 65% and NOT greater than 90%; (b) nickel composition NOT less than 5% and NOT greater than 35%; (c) diameter NOT less than 5 mm and NOT greater than 330 mm Op. 22.12.2009 Dec. 12.03.2010 - TC 0949790 7411.22.00 TUBES, FINNED, COPPER-NICKEL ALLOY, COMPRESSOR HEAT EXCHANGER Op. 13.03.2006 Dec. 02.06.2006 - TC 0605154 7411.22.00 TUBING, copper nickel, having ALL of the following: (a) grade American Society for Testing and Materials (ASTM) B111 C-70600 90/10CuNi; (b) outside diameter NOT less than 12.7 mm and NOT greater than 38.1 mm; (c) wall thickness not less than 0.90 mm and NOT greater than 2.03mm Op. 03.07.2006 Dec. 22.09.2006 - TC 0611084 Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 7411.22.00 TUBES, SEAMLESS, 90/10 copper-nickel alloy, complying with Australian Standard 1569 (AS 1569), having ALL of the following: (a) grade 706; (b) temper 1/4 hard; (c) outside diameter NOT less than 12.7 mm and NOT greater than 38.1 mm; (d) wall thickness NOT less than 0.90 mm and NOT greater than 2.03 mm Op. 31.01.2007 Dec. 01.05.2007 - TC 0701688 7411.22.00 TUBES OR PIPES, copper-nickel, conforming to the American Society for Testing and Materials B111 C70600 (ASTM B111 C70600), having an outside diameter NOT less than 38.1 mm and NOT greater than 152 mm Op. 20.11.2008 Dec. 27.02.2009 - TC 0840473 7411.22.00 TUBES OR PIPES, copper-nickel, square, having BOTH of the following: (a) conforming to American Society for Testing and Materials B111 C70600 (ASTM B111 C70600); (b) dimensions NOT greater than 100 mm x 100 mm x 6 mm wt Op. 20.11.2008 Dec. 27.02.2009 - TC 0840475 7411.22.00 CURPO NICKEL TUBES, having ALL the following specifications: (a) ASTM B111C706000 90/10 CuNi; (b) hard temper H55; (c) light drawn; (d) tensile 390 N/SQ mm; (e) elongation 20%; (f) hardness 96V; and (g) in ANY of the following sizes: (i) 6.35 OD x 0.56 mm wall; (ii) 7.93 OD x 0.56 mm wall; (iii) 9.53 OD x 0.7 mm wall; (iv) 12.70 OD x 0.91 mm wall; (v) 16.25 OD x 1.2 mm wall Op. 03.11.1994 Dec. 06.03.1995 - TC 9408720 7411.22.00 TUBES OR PIPES, 70/30 copper nickel alloy Op. 27.10.1995 Dec. 02.02.1996 - TC 9511531 TUBING, beryllium-copper Op. 20.03.1984 - TC 8437035 7411.29 Dec. 20.03.1984 7411.29.00 TUBING, copper, solid drawn, finned, internally enhanced, having ALL of the following: (a) conforming to American Society of Mechanical Engineers specification SB-75; (b) continuous integrally rolled fins; (c) NOT less than 40 fins per 25 mm; (d) length NOT less than 1 000 mm Op. 30.03.2009 Dec. 19.06.2009 - TC 0910617 7411.29.00 U TUBES, STEAM BOILER, copper-aluminium alloy Op. 26.03.2009 Dec. 19.06.2009 7411.29.00 - TC 0910175 TUBING, copper, solid drawn, finned, having ALL of the following: (a) copper to ASME specification SB-75; (b) continuous integrally rolled fins (not welded or mechanically attached) with thickness of 0.53 mm to 0.66 mm; (c) overall fin diameter 38 mm to 46 mm; (d) 275 to 350 fins/m; (e) tube internal diameter 15 mm to 22.5 mm and wall thickness Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 1.00 mm to 1.9 mm; (f) length exceeding 49 mm Op. 27.10.1994 Dec. 18.02.2009 - TC 0902892 7412.10.00 KITS, GAS OR LIQUID REFRIGERANT, consisting of BOTH of the following: (a) foam insulated branched copper pipes; (b) reducer connectors Op. 02.09.2014 Dec. 24.11.2014 - TC 1430779 7412.10.00 KITS, BRANCH, gas OR liquid refrigerant, consisting of all of the following: (a) NOT less than two copper branches; (b) reducer fittings; (c) moulded insulation covers; (d) foil duct tape Op. 09.04.2014 Dec. 10.07.2014 - TC 1412537 7412.10.00 KITS, HEADER, gas OR liquid refrigerant, consisting of all of the following: (a) NOT less than six copper branches; (b) moulded insulation covers; (c) foil duct tape Op. 09.04.2014 Dec. 10.07.2014 - TC 1412538 7412.10.00 FITTINGS, PRESS FIT TUBE, refined copper, having BOTH of the following: (a) hydrogenated nitrile butadiene rubber (HNBR) seal; (b) outside diameter exceeding 25 mm Op. 18.02.2014 Dec. 12.05.2014 - TC 1406649 7412.10.00 FITTINGS, PRESS FIT TUBE, refined copper, having BOTH of the following: (a) hydrogenated nitrile butadiene rubber (HNBR) seal; (b) outside diameter NOT greater than 25 mm Op. 18.02.2014 Dec. 12.05.2014 - TC 1406650 7412.10.00 FITTINGS, PRESS FIT TUBE, refined copper, complying with Australian Standard AS 3688-2005, having BOTH of the following: (a) ethylene propylene diene monomer (EPDM) rubber seal; (b) outside diameter exceeding 25 mm Op. 18.02.2014 Dec. 12.05.2014 - TC 1406653 7412.10.00 FITTINGS, PRESS FIT TUBE, refined copper, complying with Australian Standard AS 3688-2005, having BOTH of the following: (a) ethylene propylene diene monomer (EPDM) rubber seal; (b) outside diameter NOT greater than 25 mm Op. 18.02.2014 Dec. 12.05.2014 - TC 1406654 7412.10.00 FITTINGS, COMPRESSION, being refined copper olives Op. 12.01.2010 Dec. 07.04.2010 - TC 1001973 7412.10.00 FITTINGS, TUBE, copper, press fit, having a diameter exceeding 25 mm Op. 03.09.2009 Dec. 08.01.2010 - TC 0932753 7412.10.00 FITTINGS, CAPILLARY, refined copper, internal diameter NOT greater than 26 mm Op. 08.07.2009 Dec. 18.09.2009 - TC 0923935 7412.10.00 FITTINGS, ROOF DRAINAGE, refined copper, being ANY of the following: (a) inclined outlets; (b) gutter outlets; Item 50 applies unless otherwise stated. Tariff Description =========================================================================== (c) hoppers; (d) downpipe connectors; (e) downpipe reduction; (f) elbows; (g) s-curves; (h) hinged outlets; (i) downpipe angles; (j) downpipe junctions; (k) rainwater pipe flaps; (l) sliding collars; (m) ventilation caps including sets of 2 or more of the above Op. 14.10.2008 Dec. 14.01.2009 - TC 0835295 7412.20 FITTINGS, brass, fire brigade hose, "Storz" pattern Op. 11.07.1983 Dec. 12.09.1983 - TC 8333115 7412.20 FITTINGS, pipe, to Specification BS 2871/CN102 Op. 20.03.1984 Dec. 08.10.1985 - TC 8534452 7412.20 FITTINGS, cylindrical, pneumatic type, incorporating swivel capacity, but NOT including accessory adaptors or quick acting self sealing air line couplings Op. 26.05.1988 Dec. 07.10.1988 - TC 8805216 7412.20.00 BOTTLE TRAPS, brass, with or without seal, having All of the following: (a) chrome plated outlet pipe length NOT less than 109 mm and NOT greater than 341 mm; (b) chrome plated connection pipe; (c) Australian Standard 1589-2001 compliance Op. 18.11.2015 Dec. 02.03.2016 - TC 1541978 7412.20.00 FITTINGS, dezincification resistant brass, but NOT including push-fit OR quick connect fittings, being compression sleeve connectors, having BOTH of the following: (a) complying with Australian Standard and New Zealand Standard 2537.5-2011, (AS NZS 2537.5-2011); (b) outer diameter NOT less than 16 mm and NOT greater than 63 mm Op. 07.11.2014 Dec. 08.04.2015 - TC 1438834 7412.20.00 FITTINGS, dezincification resistant brass, but NOT including push-fit OR quick connect fittings, being compression sleeve connectors, having BOTH of the following: (a) complying with Australian Standard and New Zealand Standard 2537.2-2011, (AS NZS 2537.2-2011); (b) outer diameter NOT less than 16 mm and NOT greater than 63 mm Op. 07.11.2014 Dec. 08.04.2015 - TC 1438835 7412.20.00 BRASS FITTINGS, GAS OVEN, being EITHER of the following: (a) injector nipples; (b) injector nipple kits, consisting of ALL of the following: (i) injector nipples; (ii) stickers; (iii) bags Op. 27.05.2014 Dec. 25.08.2014 - TC 1417774 7412.20.00 FITTINGS, PRESS FIT TUBE, bronze, excluding quick connect OR push fit fittings, having BOTH of the following: (a) ethylene propylene diene monomer (EPDM) rubber seal; (b) outside diameter NOT greater than 25 mm Op. 18.02.2014 Dec. 25.06.2014 - TC 1406656 Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 7412.20.00 FITTINGS, PRESS FIT TUBE, bronze, excluding quick connect OR push fit fittings, having BOTH of the following: (a) hydrogenated nitrile butadiene rubber (HNBR) seal; (b) outside diameter NOT greater than 25 mm Op. 18.02.2014 Dec. 25.06.2014 - TC 1406652 7412.20.00 FITTINGS, PRESS FIT TUBE, bronze, having BOTH of the following: (a) hydrogenated nitrile butadiene rubber (HNBR) seal; (b) outside diameter exceeding 25 mm Op. 18.02.2014 Dec. 12.05.2014 - TC 1406651 7412.20.00 FITTINGS, PRESS FIT TUBE, bronze, complying with Australian Standard AS 3688-2005, having BOTH of the following: (a) ethylene propylene diene monomer (EPDM) rubber seal; (b) outside diameter exceeding 25 mm Op. 18.02.2014 Dec. 12.05.2014 - TC 1406655 7412.20.00 KITS, Y BRANCH, consisting of ALL of the following: (a) NOT less than two copper Y branches; (b) reducer fittings; (c) moulded insulation covers Op. 26.02.2013 Dec. 13.05.2013 - TC 1306959 7412.20.00 FITTINGS, GARDEN HOSE, brass, being ANY or a combination of two OR more of the following categories: (a) hose connectors; (b) tap adaptors; (c) tee sections; (d) hose couplings; (e) hose joiners; (f) flexible hose protectors; (g) sprinkler adaptors Op. 07.05.2013 Dec. 02.09.2013 - TC 1314861 7412.20.00 KITS, Y BRANCH, consisting of ALL of the following: (a) NOT less than two copper Y branches; (b) reducer fittings; (c) moulded insulation covers Op. 26.02.2013 Dec. 13.05.2013 - TC 1306959 7412.20.00 FITTINGS, PIPE OR TUBE, copper alloy, being lugged elbows with a screwed male extension at one end Op. 20.09.2012 Dec. 17.12.2012 - TC 1235915 7412.20.00 COUPLINGS, TUBE AND/OR PIPE, copper alloy, having a captive nut at one end Op. 29.08.2011 Dec. 21.11.2011 - TC 1129321 7412.20.00 FITTINGS, TUBE OR PIPE, copper-nickel alloy, press fit excluding quick connect, conforming to German Institute for Standardisation (DIN) standard 86019 and German Federal Office of Defence Technology and Procurement (BWB) Material Performance WL 2.1972, operating at hydrostatic pressures of 0 to 13 Bar, being ANY of the following: (a) couplings; (b) bends; (c) reducers; (d) T pieces; (e) adaptors; (f) flanges; (g) valves; (h) bulkhead and/or deck passings Op. 26.10.2010 Dec. 31.03.2011 - TC 1047743 Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 7412.20.00 FITTINGS, TUBE OR PIPE, copper-nickel, non-disconnecting, being ANY of the following: (a) connectors; (b) ends; (c) bulkhead pieces; (d) bulkhead stubs; (e) plugs; (f) sleeves; (g) nipples; (h) bushes; (i) reducers; (j) end caps; (k) bulkhead unions; (l) collars; (m) sockets; (n) adaptors Op. 26.10.2010 Dec. 24.01.2011 - TC 1047742 7412.20.00 FITTINGS, TUBE, copper alloy, press fit, having a diameter exceeding 25 mm Op. 03.09.2009 Dec. 08.01.2010 - TC 0932752 7412.20.00 FITTINGS, TUBE OR PIPE, copper nickel, but NOT including quick connect fittings, being EITHER of the following: (a) outlets; (b) couplings Op. 08.09.2009 Dec. 20.11.2009 - TC 0933394 7412.20.00 FITTINGS, FIRE HOSE, copper alloy, instantaneous Op. 08.07.2009 Dec. 25.09.2009 - TC 0923934 7412.20.00 FITTINGS, TUBE OR PIPE, copper nickel, excluding quick connect type fittings, being ANY of the following: (a) elbows; (b) flanges; (c) tees; (d) reducers; (e) bends; (f) saddles Op. 08.05.2009 Dec. 04.09.2009 - TC 0915556 7412.20.00 FITTINGS, ELECTRICAL CONDUIT, brass OR brass and polyamide Op. 20.04.2009 Dec. 10.07.2009 - TC 0913051 7412.20.00 FITTINGS, CAMLOCK, bronze OR brass Op. 22.04.2008 Dec. 18.07.2008 - TC 0804816 7412.20.00 FITTINGS, HOSE, brass, being EITHER of the following: (a) pneumatic couplers; (b) pneumatic interchange nipples Op. 22.04.2008 Dec. 18.07.2008 - TC 0804834 7412.20.00 FITTINGS, TUBE OR PIPE, copper alloy, but NOT including quick connect fittings, being ANY of the following: (a) capillary; (b) olive; (c) screwed; (d) compression Op. 15.07.2008 Dec. 10.10.2008 - TC 0818786 7412.20.00 BRASS FITTINGS, drop forge, extruded bar and/or section, taper male thread or parallel thread with washer seating faces being ANY of the following: Item 50 applies unless otherwise stated. Tariff Description =========================================================================== (a) wall bayonet quick connect; (b) floor bayonet quick connect; (c) tee junction; (d) elbow; (e) socket; (f) olive; (g) couplings; (h) union connectors; (i) adapters; (j) nipples; (k) crosses; (l) compression or 45 degree flare fittings having a tube size NOT less than 3 mm and NOT greater than 26 mm; (m) twin ferrule compression (or swage type) elbows and/or tees having a tube size NOT less than 1 mm and NOT greater than 51 mm NOTE: This order does not include quick connect fittings in respect of items (c) to (m) inclusive Op. 17.10.2003 Dec. 20.02.2009 - TC 0905920 7412.20.00 FITTINGS, pipe, having the United States Screw Thread Standard NPT (National Pipe Thread) Op. 30.01.1995 Dec. 15.05.1995 - TC 9501275 7412.20.00 FITTINGS, PNEUMATIC/VACUUM TUBE, push in, having ALL of the following: (a) OD within the range of 4 mm to 12 mm; (b) operating air pressure NOT exceeding 1 800 kPa Op. 13.02.1998 Dec. 01.05.1998 - TC 9801365 7412.20.00 BRASS FITTINGS, HOSE AND TAP, pneumatic, quick connect and release type, but NOT including garden hose fittings Op. 22.09.2000 Dec. 17.11.2000 - TC 0009182 7413.00 BRAID, woven copper, resin impregnated, desoldering Op. 20.03.1984 Dec. 20.03.1984 - TC 8437048 7413.00.00 WIRE, picture, stranded brass Op. 19.08.1994 Dec. 25.11.1994 - TC 9406908 NAILS, having brass capped heads Op. 20.03.1984 Dec. 20.03.1984 - TC 8437052 NUTS, PIPE OR TUBE FITTING, copper alloy Op. 15.07.2008 Dec. 10.10.2008 - TC 0818784 SCREWS, wood, silicon bronze Op. 01.01.2002 Dec. 09.01.2002 - TC 0108408 7415.10 7415.33.00 7415.33.00 7415.39.00 FIXING POINTS, flat conductors, drop forged brass, having a 20 mm to 25 mm diameter ball type male connector, rated in non destructive testing to 20 kA/second Op. 06.04.1993 Dec. 12.07.1993 - TC 9309109 7418.20.00 PLUGS, BATH AND/OR BASIN, brass, threaded, press down open AND close mechanism, with OR without EITHER of the following: (a) overflow apertures; (b) metal plating Op. 24.08.2015 Dec. 16.11.2015 - TC 1532645 7418.20.00 ASSEMBLIES, HANDHELD AND OVERHEAD SHOWERHEADS, plastic AND/OR chrome plated brass, having BOTH of the following: (a) chrome plated brass shower rail; (b) metal AND/OR plastic flexible hose Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 7418.20.00 7418.20.00 Op. 18.07.2012 Dec. 10.10.2012 - TC 1225704 SHOWER HEADS, brass Op. 01.08.2008 Dec. 24.10.2008 - TC 0824359 SANITARY WARE, brass, being ANY of the following: (a) soap holders; (b) tap spouts; (c) toilet roll holders Op. 10.10.2008 Dec. 14.01.2009 - TC 0834896 7418.20.00 SHOWERING SYSTEM, brass, hand held, comprising ALL of the following: (a) shower rail; (b) flexible metal hose; (c) shower head Op. 20.11.2008 Dec. 06.02.2009 - TC 0840490 7419.99 BODKINS Op. 20.03.1984 7419.99 Dec. 20.03.1984 - TC 8437060 RINGS, fishing, lure or trace Op. 20.03.1984 Dec. 20.03.1984 - TC 8437075 7419.99 STENCILS, alphabetical or numerical symbol, capable of being interlocked to compose a word or number Op. 20.03.1984 Dec. 20.03.1984 - TC 8437079 7419.99 THIMBLES, brass, dressmakers" or tailors" Op. 07.03.1985 Dec. 08.05.1985 - TC 8530786 RINGS, nose, animal Op. 30.05.1985 - TC 8532230 7419.99 Dec. 25.07.1985 7419.99 RUPTURE (BURSTING) DISCS, pressure system, whether or not incorporating vacuum supports Op. 12.06.1985 Dec. 03.04.1986 - TC 8532423 7419.99 BROOCH COMPONENTS, cupro-nickel alloy, being ANY of the following: (a) pins; (b) pin backs; (c) stems Op. 20.03.1984 Dec. 21.11.1986 - TC 8634966 7419.99 HANKS, jib Op. 30.10.1986 Dec. 03.04.1987 - TC 8635688 7419.99 BROOCH, NAME PLATE OR COSTUME JEWELLERY COMPONENTS, being ANY of the following: (a) pins; (b) pin backs; (c) stems Op. 23.10.1987 Dec. 03.03.1988 - TC 8735239 7419.99 PINS, safety Op. 25.10.1987 7419.99.00 Dec. 25.03.1988 - TC 8735240 COMPONENTS, TRAMWAY OVERHEAD CONTACT LINE, being ANY of the following: (a) hinge clevis; (b) eye clips; (c) contact wire clips; (d) double droppers; (e) droppers; Item 50 applies unless otherwise stated. Tariff Description =========================================================================== (f) clamps; (g) thimbles; (h) suspension arms; (i) brackets; (j) trigger bows Op. 15.03.2016 Dec. 09.06.2016 - TC 1610531 7419.99.00 WOVEN METAL FABRIC, whether OR not in rolls, having BOTH of the following: (a) bronze rods, having a diameter NOT greater than 8 mm; (b) stainless steel rope, having a diameter NOT greater than 4 mm Op. 07.03.2013 Dec. 27.05.2013 - TC 1308540 7419.99.00 FITTINGS, LIGHTNING PROTECTION SYSTEM, copper, being ANY of the following: (a) clamps; (b) tape clips; (c) metalwork bonds; (d) pipe bonds; (e) tape bonds; (f) cable clips; (g) cable saddles; (h) cable sockets; (i) compression connectors Op. 03.10.2012 Dec. 27.12.2012 - TC 1237482 7419.99.00 FIRE SPRINKLER HEADS, non-mechanical Op. 22.09.2011 Dec. 19.12.2011 - TC 1132399 EYELASH SUPPORTS, brass, gold plated Op. 02.06.2010 Dec. 30.08.2010 - TC 1024607 7419.99.00 7419.99.00 HANGERS, PICTURE, copper, comprising both hangers and nails Op. 24.03.2010 Dec. 11.06.2010 - TC 1014416 7419.99.00 FERRULES, WIRE ROPE Op. 16.12.2005 7419.99.00 Dec. 10.03.2006 - TC 0516795 STAVES, COPPER, BLAST FURNACE Op. 23.08.2006 Dec. 17.11.2006 - TC 0613956 7419.99.00 STOVES, oil or spirit, single burner type, having a weight NOT exceeding 1.7 kg Op. 01.01.2007 Dec. 13.11.2006 - TC 0614226 7419.99.00 PARTS, SPIRIT STOVE, being ANY of the following: (a) single burners, weight NOT exceeding 300 g; (b) screw caps; (c) simmer rings Op. 01.01.2007 Dec. 13.11.2006 - TC 0614227 7419.99.00 OUTLETS, TANK, brass, self tapping Op. 21.08.2007 Dec. 31.01.2008 - TC 0712976 NETTING, BRASS, aquaculture facility Op. 03.04.2008 Dec. 20.06.2008 - TC 0802491 7419.99.00 7419.99.00 FITTINGS, REFINED COPPER, half round, being EITHER of the following: (a) external or internal pressed European bead corners; (b) clip on rainwater or gutter outlets Op. 11.09.2008 Dec. 05.12.2008 - TC 0830840 Item 50 applies unless otherwise stated. Tariff Description =========================================================================== 7419.99.00 FITTINGS, ROOF DRAINAGE, refined copper, being ANY of the following: (a) gutter connectors; (b) stop ends; (c) gutter sieves; (d) continuous bead; (e) pipe covers; (f) pipe brackets; (g) wall holders including sets of 2 or more of the above Op. 14.10.2008 Dec. 14.01.2009 - TC 0835296 7419.99.00 SPRAYERS/NOZZLES, water, fire system Op. 10.02.1993 Dec. 14.05.1993 - TC 9308247 SUNDIALS, brass, Southern Hemisphere Op. 26.11.1993 Dec. 11.03.1994 - TC 9313863 LANCE TIPS, OXYGEN NOZZLE Op. 19.10.2000 - TC 0008840 7419.99.00 7419.99.00 7419.99.00 Dec. 05.01.2001 PARTS, BLAST FURNACE, OXYGEN OR ARGON LANCE, being ANY of the following: (a) tips; (b) bends; (c) reducers; (d) water deflectors; (e) nozzles Op. 06.11.2000 Dec. 02.02.2001 - TC 0009226 Item 50 applies unless otherwise stated.
