PROJECT: Sun Life Centre, Toronto, On
PEERLESS ELECTRIC CO. LTD
LIGHTING AT IT`S BEST
PROJECT:
La Maison des Coopérants, Montréal, Qué.
Bridging the gap between
engineering & architecture.
Our complete effort is devoted to the design and manufacture
of quality fluorescent lighting equipment to specification
prescribed by the lighting specifier.
PROJECT:
Canadian Imperial Bank of Comerce, Vancouver, B.C.
PROJECT: IPL Building, Edmonnton, ALTA
1
Peerless Electric Company Ltd.
Peerless Electric is a leading Canadian lighting solutions provider specializing
in the manufacture and supply of lighting fixtures for the commercial,
industrial and institutional markets.
Peerless offerings include:
- A full range of fluorescent fixtures.
- High quality European style incandescent, HQI, and low voltage luminaires.
- Specialty architectural luminaires for direct and indirect lighting.
- Custom designed fixtures.
- Customer assistance in all aspects of lighting design.
Peerless products are specified by Architects and Engineers across North
America and Peerless luminaires have been chosen for some of the most
prestigious projects in Canada and abroad.
Peerless Electric Company Ltd., with modern production facilities in Montreal,
Toronto, and Calgary has been manufacturing and supplying lighting
fixtures for the North American market since 1939. Led by a dynamic
management team, Peerless has continuously adapted to meet the needs
of its customers and to apply the latest technologies.
COUNT ON US. WE WILL DO THE JOB FOR YOU!
EERLESS
E LECTRIC C O. L TD
PICTORIAL INDEX
Page
AD
............ 8
IPR
IPS
............ 9
............ 9
SDL
SDL
SDL
1x4
10
10
10
AOP
SOP
Page
20"x 60"
20"x 60"
31
31
30" x 30"
CL
CL
with diffuser
parabolic
32
26
34
11
11
PF ..........
PFK ..........
36
36
OPL
OPL
OPL
OPL
..... 13
..... 14
2x4 ..... 15
20"x48"
16
PMA .......
40
4PL
4PL
4PL
2x2
2x4
1x4
2x2
1x4
2x4
2 & 3PL
2 & 3PL
2 & 3PL
3TPLS
3TPLS
..... 18
..... 19
..... 20
1x4
2x2
2x4
2x2
2x4
21
22
23
24
24
20" x 60"
AOP7 ......... 25
SOP7 ......... 25
OPL ......... 16
SURFACE / WALL / CEILING
OPTILUX
RECESSED PARABOLIC
Series
RSL .........
2x2
PW2000 .....
WWH .....
RECESSED WITH LENS
2
ARCHITECTURAL
KL3 ..... 4,5,6,7.
KM3 ..... 4,5,6,7.
RECESSED
Series
RECESSED WITH LENS
GENERAL INFORMATION & ALPHABETICAL INDEX SEE BACK PAGES
PEL
.......
32
KOPA ......... 38
KOPA-D ..... 39
LX
.......
35
LACH ..... 28
LACH3 ..... 29
NDLC ..... 26
CLOUDLINE
41
SL
SL
SL
CI
CN
42
42
1x4
2x2
2x4
..... 30
..... 30
..... 30
EERLESS
E LECTRIC C O. L TD
.........
.........
PICTORIAL INDEX
Series
CR
Page
........
43
DAMP AREAS
GENERAL INFORMATION & ALPHABETICAL INDEX SEE BACK PAGES
.........
52
LS
........
LSS ........
LSHO .........
NSL ..........
54
55
55
56
LSG ......... 54
LSSG ......... 55
LSHOG ...... 55
CBL
CDH
HBL
........ 47
........ 47
........ 47
NIR .........
NIRA .........
62
62
IT2
IT3
3 LAMPS
60
61
ILS .........
ALS .........
57
57
DHIF .......... 46
STRIPS AND INDUSTRIALS
......... 45
CBA ......... 46
VANDAL RES./ WET-DAMP / HAZ. LOC.
WP
Page
GP
2 LAMPS
CVA ......... 44
WM ......... 44
SMS ......... 58
VT
.........
VTU .........
48
49
SSL .........
DC/DP .......
FC/FP .......
51
50
SCT .........
VR
.........
53
53
EERLESS
WEATHERPROOF
SURFACE / WALL / CEILING
UCL ......... 43
Series
E LECTRIC C O. L TD
59
WPS ......... 64
WPSP ......... 65
IWPS ........ 63
IWPSP ...... 63
3
ARCHITECTURAL LIGHTING SOLUTIONS
INDIRECT
INDIRECT/ DIRECT
n
ADP6-
DIRECT/INDIRECT
4
n
WWH-
ASYMMETRIC
PW-2000
ASYMMETRIC
n
SDLC-
INDIRECT/DIRECT
n
n
n
n
n
VCR-
ASYMMETRIC
SHADOW FREE TASK ILLUMINATION
GLARE VIRTUALLY ELIMINATED
VEILLING REFLECTIONS NON EXISTENT
APPLICATION & DESIGN ASSISTANCE AVAILABLE
EERLESS
E LECTRIC C O. L TD
ARCHITECTURAL LIGHTING - SUSPENDED - INDIRECT / DIRECT LUMINAIRES
KL3 series
LOW PROFILE
Unique sculptured, low profile, elliptical cross section with regressed splayed aperture rising one inch above fixture bottom.
Designed for efficiency with form and function. Aesthetically enhances and illuminates the interiors of computer offices, libraries,
banks, boardrooms, reception areas, or anywhere an alternative to the norm is desired.
Extruded housing from aluminum alloy AA6063 with 0.083” minimum wall thickness. Die cast aluminum end and joiner plates.
Concealed fastening hardware. One piece luminaire can be factory assembled and wired up to a nominal 24 foot length, subject to
building access. Other lengths are available in linear form or in any configurations possible by using matching specific connectors.
The optical chamber consists of reflectors finished with a high gloss polyester powder-coat paint. To achieve a wide spread
light distribution a specular hammertone side kickers were added.
Standard finish is a baked white polyester powder-coat. Other finishes available in a wide
selection of colours.
Three light distributions are offered:-
INDIRECT ( Uplight only).
INDIRECT/DIRECT ( Downlight not isolated ).
INDIRECT/ DIRECT ( Downlight isolated ).
Designed for use with F32T8, twin tube TT5 or BX, and T5 lamps. Not suitable for T12 lamps.
Lamp wattage may vary depending on space available to fill a specified section of a luminaire with continuous lamps.
This series is custom manufactured to any nominal length required to suit a space, whether linear or geometrically configured.
Shop drawings will be issued for approval. Manufacturing will proceed when such drawings are returned as approved by the client.
THE KL3 SERIES UTILIZES THE LATEST TECHNOLOGY IN
LAMPS AND MINIATURE ELECTRONIC BALLAST DESIGNS.
AVAILABLE FOR 120, 277, 347 VAC, 60 HZ.
3-1/4”
3”
11”
CROSS SECTION VIEW
STANDARD SUSPENSION SUPPLIED WITH STAINLESS STEEL
AIRCRAFT CABLE SYSTEM AND WHITE CORD FEED.
ROD HANGERS ARE AVAILABLE AS AN OPTION.
KM3 series
This series has all the characteristics of the above KL3 luminaire, except that provisions were added to accomodate
conventional ballasts although mini-can electronic ballasts may be used. The KL3 can be up to a maximum of 20 feet in length.
The ballast compartment is strategically located at fixture ends or at junctions of configured layouts. The snap-in ballast
covers allows access to ballasts without the use of tools.
A sliding adjustable bridge hangers allow field adjustments
to avoid overhead obstructions.
THE KM3 SERIES WAS DESIGNED FOR USE WITH
CONVENTIONAL BALLASTS ALTHOUGH MINIATURE
ELECTRONIC BALLAST DESIGNS MAY BE USED.
AVAILABLE FOR 120, 277, 347 VAC, 60 HZ.
4-3/4”
3”
11”
CROSS SECTION VIEW
STANDARD SUSPENSION SUPPLIED WITH STAINLESS STEEL
AIRCRAFT CABLE SYSTEM AND WHITE CORD FEED.
ROD HANGERS ARE AVAILABLE AS AN OPTION.
EERLESS
E LECTRIC C O. L TD
5
ARCHITECTURAL LIGHTING - SUSPENDED - INDIRECT/DIRECT LUMINAIRES
KL3 and KM3 series
The KL3 series is supplied with miniature electronic ballasts.
The KM3 series was designed to accept conventional ballasts. See below.
BASE CODE NO.
6
CROSS SECTIONS
INDIRECT
INDIRECT/ DIRECT
32 W /T8
KL3-0100
KL3-3100-
28 W /T5
KL3-0106
KL3-3106-
54 W /T5 /HO
KL3-0107
KL3-3107-
40 W /TT5 /BX
KL3-0104
KL3-3104-
32 W /T8
KL3-0200
KL3-3200-
28 W /T5
KL3-0206
KL3-3206-
54 W /T5 /HO
KL3-0207
KL3-3207-
40 W /TT5 /BX
KL3-0204
KL3-3204-
32 W /T8
KL3-0300
KL3-3300-
28 W /T5
KL3-0306
KL3-3306-
54 W /T5 /HO
KL3-0307
KL3-3307-
28 W /T5
KL3-0406
KL3-3406-
54 W /T5 /HO
KL3-0407
KL3-3407-
LAMPS
1 row of
2 rows of
3 rows of
4 rows of
INDIRECT / DIRECT WITH ISOLATED DOWNLIGHT
3 rows of
SHIELDING
SELECTIONS
FOR INDIRECT /
DIRECT
- K23
CLEAR PRISMATIC
- 75
12345678901
12345678901
12345678901
PARABOLIC LOUVER
- 62
PERFORATED PAN
123456789012345678901
123456789012345678901
123456789012345678901
123456789012345678901
123456789012345678901
- 50
SOLID BAFFLE
123456789012345678901
123456789012345678901
123456789012345678901
123456789012345678901
123456789012345678901
- 55
32 W /T8
( 2 up and 1 down )
KL3-3210-
28 W /T5
(
"
)
KL3-3216-
54 W /T5 /HO (
"
)
KL3-3217-
PERFORATED BAFFLE
123456789012345678901
123456789012345678901
123456789012345678901
123456789012345678901
- 90
4 rows of
28 W /T5
( 2 up and 2 down )
54 W /T5 /HO (
KM3 series:
"
)
KL3-3226-
OPAL DIFFUSER
KL3-3227-
This series is identical to KL3 series except provisions were made to accept the
use of conventional ballasts. Refer to page 7 for full description.
To order replace KL3 with KM3 in the numbering code given above.
EERLESS
ELECTRIC C O. L TD
ARCHITECTURAL LIGHTING - SUSPENDED - INDIRECT/DIRECT LUMINAIRES
KL3 and KM3 series
CONFIGURATION EXAMPLES
( bottom views)
INFORMATION REQUIRED TO FILL INQUIRIES.
Specify the indirect or indirect-direct lighting component's
base number as shown on page 6.
Select a configuration from the samples illustrated and
specify the nominal length of each section as designated by the
letter "L" or supply your personal configuration.
A
7
L
B
A single run from 2 feet up to 24 feet are possible as shown
in configuration "A" for the KL3 and up to 20 feet for the KM3.
SPECIFY:
Type of hanger desired, stem or cable, length.
Colour of finish.
Ballast volts, 120, 277, or 347v.
Number of circuits, 1 or 2.
Plus other particulars, if any.
C
"L" CONNECTOR
This information will help us to prepare a quotation and submit a
drawing for your approval.
D
Many configurations are possible. Our staff is at your disposal if
some assistance is required to select and plan a layout to meet the
criteria specified for a lighting project.
Please note that this series is custom manufactured and requires
precision input to satisfy a job situation, and a successful installation.
Therefore, our assistance in luminaire layout and component selection
can be beneficial during the initial design stage. We will also supply
detailed shop drawings for approval. Manufacturing will begin when
the approved drawings are received from the client.
"X" CONNECTOR
E
"T" CONNECTOR
Photometric data can be provided on request.
F
The configuration connectors are assembled from the same
aluminum extrusion as the luminaires. This provides a continuity with
a see through appearance and reduces bulges where luminaires join.
135° CONNECTOR
G
CONFIGURATION CONNECTORS
"L"
"T"
"X"
EERLESS
E LECTRIC C O. LTD
135° (or as specified).
FLUORESCENT LUMINAIRES FOR SURFACE OR PENDANT MOUNTING
AD
ACADEMIC DELUXE
High performance, low brightness luminaires with glare control
shieldings.
Suitable for learning institutions, offices, boardrooms, etc..
Surface or pendant installation, individual or continuous rows.
8
Available with or without uplight component, solid or perforated
sides. Perforated side panels have an internal acrylic overlay to
reduce pinhole brightness, HT and MR finishes optional.
Steel construction, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 vac., 60 Hz. Other ballasts are available on request.
CAT. NO.
CLOSED TOP
LAMPS
LENGTH
SOLID
SIDES
PERFORATED
SIDES
1-32 W/T8
48"
AD5-4-132-PB
ADP5-4-132-PB
2-32 W/T8
48"
AD5-4-232-PB
ADP5-4-232-PB
2-32 W/T8 (tandem)
96"
AD5-8-232-PB
ADP5-8-232-PB
4-32 W/T8 (tandem)
96"
AD5-8-432-PB
ADP5-8-432-PB
2-32 W/T8
48"
AD5-4-232-200
ADP5-4-232-200
4-32 W/T8 (tndem)
96"
AD5-8-432-200
ADP5-8-432-200
1-32 W/T8
48"
AD5-4-132-23
ADP5-4-132-23
2-32 W/T8
48"
AD5-4-232-23
ADP5-4-232-23
2-32 W/T8 (tandem)
96"
AD5-8-232-23
ADP5-8-232-23
4-32 W/T8 (tandem)
# 23 ACRYLIC PRISMATIC DIFFUSER
Also available with perforated top. To order, replace (AD5) with (AD7) in the Cat. number.
96"
AD5-8-432-23
ADP5-8-432-23
1-32 W/T8
48"
AD6-4-132-PB
ADP6-4-132-PB
2-32 W/T8
48"
AD6-4-232-PB
ADP6-4-232-PB
2-32 W/T8 (tandem)
96"
AD6-8-232-PB
ADP6-8-232-PB
4-32 W/T8 (tandem)
96"
AD6-8-432-PB
ADP6-8-432-PB
2-32 W/T8
48"
AD6-4-232-200
ADP6-4-232-200
4-32 W/T8 (tndem)
96"
AD6-8-432-200
ADP6-8-432-200
1-32 W/T8
48"
AD6-4-132-23
ADP6-4-132-23
2-32 W/T8
48"
AD6-4-232-23
ADP6-4-232-23
2-32 W/T8 (tandem)
96"
AD6-8-232-23
ADP6-8-232-23
4-32 W/T8 (tandem)
96"
AD6-8-432-23
ADP6-8-432-23
4-1/2"
10"
PARALLEL BLADE LOUVER
4-1/2"
10"
3" X 3" X 1½" DEEP ALUMINUM LOUVER
4-1/2"
10"
OPEN TOP
4-1/2"
10"
PARALLEL BLADE LOUVER
4-1/2"
10"
3" X 3" X 1½" DEEP ALUMINUM LOUVER
4-1/2"
10"
# 23 ACRYLIC PRISMATIC DIFFUSER
EERLESS
E LECTRIC C O. L TD
STEM MOUNTED LOW PROFILE HOUSINGS - INDIRECT LIGHTING
IPS
RAPID START LAMPS
For stem mounting, shallow profile fluorescent luminaires
for indirect lighting.
The ceiling becomes the primary illumination source.
Shadows become virtually eliminated.
Reflected glare within the illuminated space is minimized
Fabricated from code gauge steel. Baked white
polyester finish is standard. Other colours available as an
option.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
LAMPS
LENGTH
CAT. NO.
2-32 W/T8
48"
IPS-4-232
4-32W/T8
96"
IPS-8-432
2"
11-1/2"
STEM MOUNTED LOW PROFILE HOUSINGS - INDIRECT LIGHTING
IPR
RAPID START LAMPS
For stem mounting, shallow profile fluorescent luminaires
for indirect lighting.
The ceiling becomes the primary illumination source.
Shadows become virtually eliminated.
Reflected glare within the illuminated space is minimized
Fabricated from code gauge steel. Baked white
polyester finish is standard. Other colours available as an
option.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
LAMPS
LENGTH
CAT. NO.
2-32 W/T8
48"
IPR-4-232
4-32 W/T8
96"
IPR-8-432
2"
8-7/8"
EERLESS
E LECTRIC C O. L TD
9
A SOFT DIFFUSED LIGHT, RECESSED DIRECT / INDIRECT LUMINAIRE
SDL Saturn
An elegant modern luminaire with recessed perforated metal shielding diffusers. Makes use of new
high wattage compact fluorescent lamps to provide
10
a high quality of soft diffused illumination for enhanced visual comfort and appearance.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
MODULE
5 5/8”
11 7/8”
5 5/8”
11 7/8”
5 1/8”
23 7/8”
5 1/2”
23 7/8”
5 5/8”
Asymetric
11 7/8”
6 1/4”
LAMPS
1' x 2'
1-40 W/TT5/BX
SDLC-12G-140X
1' x 4'
2-40 W/TT5/BX
SDLC-14G-240X
1' x 2'
2-40 W/TT5/BX
SDLC-12G-240X
1' x 4'
4-40 W/TT5/BX
SDLC-14G-440X
2' x 2'
1-40 W/TT5/BX
SDLC-22G-140X
2' x 4'
2-40W/TT5/BX
SDLC-24G-240X
2' x 2'
2-40 W/TT5/BX
SDLC-22G-240X
2' x 4'
4-40 W/TT5/BX
SDLC-24G-440X
1' x 2'
1-40 W/TT5/BX
SDLA-12G-140X
1' x 4'
2-40 W/TT5/BX
SDLA-14G-240X
2' x 2'
2-40 W/TT5/BX
SDLS-22G-240X
2' x 4'
4-40 W/TT5/BX
SDLS-24G-440X
Side Mounted Lamps
23 3/4”
Other ceiling grids
Other lamps:
TT5
T5, T8
CAT. NO.
Biax compact fluorescent lamps are also available
for: 36, 39, 50 and 55 watts.
To order, replace the 40X in the Cat. No. with the desired
wattage. Example: For 55 watt biax lamps the Cat. No.
becomes SDLS-24G-455X
Luminaires designed for T5 miniature fluorescent lamps or
T8 regular lamps are available upon request.
EERLESS
E LECTRIC C O. LTD
Luminaires are available for the following
“T” bar ceiling grids:
(Imperial) 20” x 60”
(Metric) 500mm x 1500mm
A conversion kit is available for luminaires
intended for drywall ceiling installation.
To order: Replace G in cat no.with FK.
RECESSED PERIMETER WALL LIGHTING SYSTEM
PW
A perimeter wall lighting system,
for a continuous even illumination
on vertical surfaces.
Overlapping vertically staggered lamps
coupled with a semi-specular aluminum
reflector and aluminum baffles.
10 3/4"
The system is fully recessed and mounted to wall.
Extruded aluminum backplate and ceiling trim. Bone
white finish.
7"
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
SECTIONS
LAMPS
INDIVIDUAL - BOTH ENDS CLOSED
1-17
1-25
1-32
2-25
2-32
1 - LAMP
L
2 - LAMPS
L
W/T8
W/T8
W/T8
W/T8
W/T8
LENGTH
24"
36"
48"
69"
93"
CAT.NO.
PW-2240
PW-2360
PW-2480
PW-2690
PW-2930
Long perimeter sections are formed from combinations of ends, connecting sections, left and right corner pieces, filler plates
and louvers as required to suit job dimensions. Please consult factory for details.
CORNER SECTIONS
LOUVERS
90° INSIDE CORNER
PW-2001
90° OUTSIDE CORNER
PW-2002
12 5/8"
12 5/8"
SINGLE BLADE
PW-SB-48"
BOLD BLADE
PW-BB-48"
3/8"
1/16"
1"
10 5/8"
PARABOLIC BLADE
PW-PB-48"
1 3/8"
10 5/8"
3/8"
1"
2"
Wall Washer Hilighter
An unobtrusive recessed wall washer luminaire that provides a
high uniform level of illumination on vertical surfaces and walls.
Most suited for display lighting and end installations in offices to
eliminate the dark shadowing and to brighten the working environment.
WWH
LAMPS
4 3/4"
11 5/16"
LENGTH
CAT.NO.
1-39W/TT5/BX
20"
WWH-20-139X
1-17W/T8
1-40W/TT5/BX
24"
24"
WWH-2-117
WWH-2-140 X
1-32W/T8
2-40W/TT5/BX
1-28W/T5
2-28W/T5
48"
48"
48"
48"
WWH-4-132
WWH-4-240 X
WWH-4-128
WWH-4-228
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
EERLESS
E LECTRIC C O. LTD
11
RP-1
QUALITY
LUMINAIRES
FOR
12
VDT
OFFICE
LIGHTING
Lamp cut-off
RP-1 MAX. ALLOWABLE
CANDELAS / M²
Recommended Acceptable
85° = 175
175
75°
350
=
175
Louver cut-off
45°
55°
RP-1 CRITERIA
60° Luminance cut-off angle
65°
=
350
850
The IES recommended practice for lighting offices
with computer visual display terminals.
55°
=
850
> 850
Light controlled by the specular aluminum louver
virtually eliminates glare at angles above the louver
cut-off angle, (the shielding zone).
Optimum ambient lighting should provide a balance between VDT task
luminance and the surrounding area. The IES criteria of RP-1 provide
guidance as to the recommended and acceptable values, the table above
shows those values at the different applicable angles.
OPTILUX luminaires are equipped with a precision formed parabolic louver
made from low iridescent specular aluminum that virtually eliminates
reflected luminaire image on visual display terminals (VDT), providing
optimum visual comfort per RP-1 recommendations.
Many Luminaire families have louver assemblies retained with T-hinges
and spring loaded cam latches.
PRECISE LIGHT CONTROL
OPTIMUM VISUAL PERFORMANCE
DEEP, LOW IRIDESCENT SPECULAR
ALUMINUM PARABOLIC LOUVERS
ENERGY EFFICIENT LIGHTING
WIDE CHOICE OF BALLASTS AND
VOLTAGES
ELECTRONIC OR MAGNETIC
Steel parts are die formed and finished with a durable white polyester
coating.
Air control dampers are available as an option for cold air handling
luminaires.
Several other luminaires in this catalogue meet or exceed the RP-1 requirements. Please consult factory for applicability.
EERLESS
120V, 277V, 347 VOLTS 60HZ . AC.
T-GRID CEILING MODULES:
1' X 4', 2' X 2', 2' X 4' , 20" X 48" , 20" X 60"
F O R O T H E R C E I L I N G T Y P E S , S E E PA G E 1 7
OR CONSULT FACTORY
PHOTOMETRICS AVAILABLE UPON REQUEST
E LECTRIC C O. L TD
"OPTILUX" AIR HANDLING PARABOLIC LUMINAIRES
OPL
1' x 4'
OPTILUX 1' x 4' air handling luminaires.
Ambient lighting balance between VDT task and
surrounding area.
Precision formed, 4¼" deep cell low iridescent specular
aluminum louver.
Louver assembly retained with T-hinges and
spring loaded cam latches.
Die formed steel housing. White polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
1' x 4'
T-GRID CEILING
AIR FUNCTIONS
LAMPS
AIR SUPPLY / RETURN
CAT. NO.
1-32 W/T8
OPLA-14G-132-9
2-32 W/T8
OPLA-14G-232-9
1-32 W/T8
OPLS-14G-132-9
2-32 W/T8
OPLS-14G-232-9
7 3/4"
11 3/4"
STATIC
7 3/4"
11 3/4"
PHOTOMETRIC REPORT NO. LSC5601 - LIGHTING SCIENCES CANADA LTD
LUMINAIRE CAT. NO. OPLS-14G-132-9
Candela Distribution:
90
ACROSS
ALONG
<
400
50
800
1200
0
0
5
10
15
20
25
30
35
40
45
50
55
60
65
ALONG
ACROSS
1154
1156
1146
1109
1070
1020
956
871
681
456
194
22
3
0
1154
1141
1138
1091
1053
1073
1144
1023
675
333
195
94
23
0
30
Luminaire Spacing Criterion:
9 CELLS
Total Luminaire
Optical Efficiency = 62.9%
ALONG
1.2
ACROSS
1.4
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code page 17, or consult factory.
EERLESS
E LECTRIC C O. L TD
Coefficients of Utilization:
Floor cavity reflectance = 0.20
pcc
pw
RCR
0
1
2
3
4
5
.8
.7 .5 .3 .1
.7
.7 .5 .3 .1
.75 .75 .75 .75
.71 .69 .67 .66
.67 .64 .61 .59
.63 .59 .55 .53
.59 .54 .50 .47
.56 .50 .46 .42
.73 .73 .73 .73
.70 .68 .66 .65
.66 .63 .60 .58
.62 .58 .55 .52
.58 .53 .50 .47
.54 .49 .45 .42
Average Luminaire Brightness
(cd/sq meter):
<
55
65
75
85
ALONG
147
0
0
0
45
575
0
0
0
ACROSS
625
0
0
0
MR MAX. REVEAL
FINISH see page 71
13
"OPTILUX" AIR HANDLING PARABOLIC LUMINAIRES
OPL
2' x 2'
OPTILUX 2' x 2' air handling luminaires.
Air functions, cold air supply / return, or static.
Recessed air aperture along 2 sides of
luminaire housing.
14
Precision formed, 4¼" deep cell low iridescent specular
aluminum louver.
Louver assembly retained with T-hinges and
spring loaded cam latches.
Die formed steel housing . White polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
2' x 2'
T-GRID CEILING
AIR FUNCTIONS
LAMPS
AIR SUPPLY / RETURN
6"
23 3/4"
STATIC
CAT. NO.
3-40 W/T5/BX
OPLA-22G-340X-12
3-31 W/T8/U
OPLA-22G-331-12
3-17 W/T8
OPLA-22G-317-12
3-40 W/T5/BX
OPLS-22G-340X-12
3-31 W/T8/U
OPLS-22G-331-12
3-17 W/T8
OPLS-22G-317-12
6"
23 3/4"
PHOTOMETRIC REPORT NO. LSC5809 - LIGHTING SCIENCES CANADA LTD
LUMINAIRE CAT. NO. OPLA-22G-340X-12
90
ACROSS
ALONG
<
1000
50
2000
3000
3 x 4 12 CELLS
0
Candela Distribution:
0
5
10
15
20
25
30
35
40
45
50
55
60
65
ALONG
3472
3474
3406
3317
3185
3024
2819
2561
2196
1643
1029
206
20
0
ACROSS
3472
3500
3500
3453
3490
3473
3397
2600
1308
632
299
45
0
0
30
Luminaire Spacing Criterion:
Total Luminaire
Optical Efficiency = 60.8 %
ALONG
1.2
CoefficientsofUtilization:
Floor cavity reflectance = 0.20
ACROSS
1.3
pcc
.8
pw .7 .5 .3 .1
RCR
0 .72 .72 .72 .72
1 .69 .67 .66 .64
2 .65 .63 .60 .58
3 .62 .58 .55 .52
4 .59 .54 .51 .48
5 .55 .50 .46 .44
.7
.7 .5 .3 .1
.71 .71 .71 .71
.67 .66 .64 .63
.64 .61 .59 .57
.61 .57 .54 .52
.58 .53 .50 .48
.54 .49 .46 .43
Average Luminaire Brightness
(cd/sq meter):
<
55
65
75
85
ALONG
1734
0
0
0
45
ACROSS
1416
270
0
0
0
0
0
0
> Air control / damper blades are available as an option.
MR MAX. REVEAL
FINISH see page 71 > For other ceiling type installation see numbering code on PAGE 17, or consult factory.
EERLESS
E LECTRIC C O. L TD
"OPTILUX" AIR HANDLING PARABOLIC LUMINAIRES
2' x 4'
OPTILUX 2' x 4' air handling luminaires.
OPL
Conforms to VDT lighting criteria.
Ambient lighting balance between VDT task
and surrounding area.
Precision formed, 4¼" deep cell low iridescent specular
aluminum louver.
Louver assembly retained with T-hinges and
spring loaded cam latches.
Die formed steel housing . White polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
2' x 4'
T-GRID CEILING
AIR FUNCTIONS
LAMPS
AIR SUPPLY / RETURN
CAT. NO.
2-32 W/T8
OPLA-24G-232-27
3-32 W/T8
OPLA-24G-332-27
2-32 W/T8
OPLS-24G-232-27
3-32 W/T8
OPLS-24G-332-27
7 3/8"
23 3/4"
STATIC
6"
23 3/4"
PHOTOMETRIC REPORT NO. LSC5188 - LIGHTING SCIENCES CANADA LTD
LUMINAIRE CAT. NO. OPLS-24G-332-27
90
ACROSS
ALONG
<
1000
50
2000
3000
0
Candela Distribution:
0
5
10
15
20
25
30
35
40
45
50
55
60
65
ALONG
ACROSS
2996
2997
2956
2867
2772
2654
2525
2338
2027
1476
738
143
5
0
2996
3126
3336
3512
3625
3530
3499
3127
1769
723
352
34
0
0
30
Luminaire Spacing Criterion:
3x9
27 CELLS
Total Luminaire
Optical Efficiency = 63.7 %
ALONG
1.2
ACROSS
1.5
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code on PAGE 17, or consult factory.
EERLESS
E LECTRIC C O. L TD
CoefficientsofUtilization:
Floor cavity reflectance = 0.20
pcc
.8
pw .7 .5 .3 .1
RCR
0 .76 .76 .76 .76
1 .72 .70 .68 .67
2 .68 .65 .62 .60
3 .64 .59 .56 .53
4 .60 .55 .51 .48
5 .56 .50 .46 .43
.7
.7 .5 .3 .1
.74 .74 .74 .74
.70 .69 .67 .66
.67 .64 .61 .59
.63 .59 .55 .53
.59 .54 .51 .47
.55 .50 .46 .43
Average Luminaire Brightness
(cd/sq meter):
<
55
65
75
85
ALONG
407
0
0
0
45
606
0
0
0
ACROSS
97
0
0
0
MR MAX. REVEAL
FINISH see page 71
15
"OPTILUX" AIR HANDLING PARABOLIC LUMINAIRES FOR T-GRID CEILING 20"x 60" & 20"x 48"
OPL
Air handling luminaires for suspended T-grid ceiling.
Air supply / return, or static.
4¼" deep cell, precision formed, low iridescent
specular aluminum parabolic louver.
16
Black perimeter reveal around louver assembly.
White polyester finish.
20" x 48" modules are available (see below).
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
20" x 60"
T- GRID CEILING
AIR FUNCTIONS
LAMPS
CAT. NO.
AIR SUPPLY / RETURN
2-32 W/T8
OPLA-205G-232-18
STATIC
2-32 W/T8
OPLS-205G-232-18
6"
19 3/4"
20" x 48"
T-GRID CEILING
AIR FUNCTIONS
LAMPS
CAT.NO.
AIR SUPPLY / RETURN
2-32 W/T8
OPLA-204G-232-18
STATIC
2-32 W/T8
OPLS-204G-232-18
6"
19 3/4"
PHOTOMETRIC REPORT NO. LSC5361 - LIGHTING SCIENCES CANADA LTD
LUMINAIRE CAT. NO. OPLA-204G-232-18
90
ACROSS
ALONG
1000
50
2000
3000
0
30
2 x 9 18 CELLS
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
ALONG
ACROSS
1977
1976
1937
1885
1830
1758
1662
1534
1372
1038
575
128
0
0
0
1977
1974
2079
2246
2348
2290
2254
2328
2080
1077
464
225
45
2
0
Luminaire Spacing Criterion:
Total Luminaire
Optical Efficiency = 69.4%
MR MAX. REVEAL
FINISH see page 71
Candela Distribution:
<
ALONG
1.2
ACROSS
1.6
CoefficientsofUtilization:
Floor cavity reflectance = 0.20
pcc
.8
pw .7 .5 .3 .1
RCR
0 .83 .83 .83 .83
1 .78 .76 .74 .72
2 .74 .70 .67 .64
3 .69 .64 .60 .57
4 .65 .59 .54 .51
5 .60 .54 .49 .45
.7
.7 .5 .3 .1
.81 .81 .81 .81
.76 .75 .73 .71
.72 .69 .66 .63
.68 .63 .59 .57
.63 .58 .54 .50
.59 .53 .48 .45
Average Luminaire Brightness
(cd/sq meter):
<
55
65
75
85
ALONG
456
0
0
0
45
ACROSS
1180
805
0
0
0
0
0
0
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code on PAGE 17, or consult factory.
EERLESS
E LECTRIC C O. L TD
OPL
series
CAT. NO.=
OPL
CATALOG NUMBERING CODE
A
_
24
G
_
3
32
_
27
_ 120
EL
BALLAST
SERIES
OPL
EL = Electronic
AIR FUNCTIONS
A = Air supply
S = Static
VOLTS
120, 277, 347.
LOUVER (number of cells)
MODULE
1' x 4' =
2' x 2' =
2' x 4' =
20" x 60" =
14 = 1' x 4'
22 = 2' x 2'
24 = 2' x 4'
204 = 20" x 48"
205 = 20" x 60"
515 = 500mm x1500mm
9
12
27
18
LAMP/WATTS
1' x 4'
(1 or 2) 32 W/T8
2' x 4'
(2 or 3) 32 W/T8
20" x 48"
20" x 60"
(2) 32 W/T8
2' x 2'
(3) 40 W/TT5/BX
(3) 31 W/T8/U
(3) 17 W/T8
CEILING TYPE
G = T-grid
NUMBER OF LAMPS
1, 2, 3.
CEILING TYPES:
EXPOSED "T" GRID
Type "G"
AIR FUNCTIONS:
AIR CONTROL DAMPER
AIR SUPPLY / RETURN
Optional for Air Supply / Return Units
DRYWALL FRAMING KIT
STATIC
Type "FK"
FOR OTHER CEILING SYSTEMS
CONSULT FACTORY.
SPRING LOADED CAM LATCH
EERLESS
ELECTRIC C O. L TD
17
4" DEEP CELL AIR HANDLING PARABOLIC LUMINAIRES
4PL
1' x 4'
Maximum shielding for visual comfort.
4" deep cell parabolic semi-specular aluminum
louver. Interlocked mitered corners.
Air functions, air supply / return, static.
Air control blades available as an option for cold air
handling units.
18
Louver is retained with T hinges and spring loaded
cam latches.
Steel housing. Baked white polyester powder finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
1' x 4'
T-GRID CEILING
AIR FUNCTION
LAMPS
AIR SUPPLY / RETURN
1-32 W/T8
4PLA-14G-132-8
"
4PLS-14G-132-8
2-32 W/T8
4PLA-14G-232-16
CAT. NO.
7 3/4"
11 3/4"
STATIC
1 x 8 8 CELLS
AIR SUPPLY / RETURN
7 3/4"
11 3/4"
STATIC
"
4PLS-14G-232-16
2 x 8 16 CELLS
1' x 4'
WITH FRAMING KIT FOR DRY WALL CEILING
AIR SUPPLY / RETURN
1-32 W/T8
4PLA-14FK-132-8
"
4PLS-14FK-132-8
2-32 W/T8
4PLA-14FK-232-16
"
4PLS-14FK-232-16
1 x 8 8 CELLS
STATIC
AIR SUPPLY / RETURN
2 x 8 16 CELLS
STATIC
MR MAX. REVEAL
FINISH see page 71
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code
on PAGE 27, or consult factory.
EERLESS
E LECTRIC C O. L TD
4" DEEP CELL, AIR HANDLING PARABOLIC LUMINAIRES
4PL
2' x 2'
Maximum shielding for visual comfort.
4" deep cell, parabolic semi- specular aluminum
louver. Interlocked mitered corners.
Air functions, cold air supply / return, static. Air control
blades are available as an option.
Recessed air apertures along 2 sides of luminaire housing.
Louver assembly retained with T-hinges and spring loaded
cam latches.
Steel housing, white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
2' x 2'
T-GRID CEILING
AIR FUNCTION
LAMPS
AIR SUPPLY/RETURN
6 3/4"
23 3/4"
CAT. NO.
3-40 W/T5/BX
4PLA-22G-340X-9
"
4PLS-22G-340X-9
STATIC
3 x 3 9 CELLS
6 3/4"
AIR SUPPLY/RETURN
23 3/4"
3-31 W/T8/U
STATIC
"
4PLA-22G-331-9
4PLS-22G-331-9
3 x 3 9 CELLS
6 3/4"
AIR SUPPLY/RETURN
23 3/4"
STATIC
4-17 W/T8
4PLA-22G-417-16
"
4PLS-22G-417-16
4 x 4 16 CELLS
2' x 2'
WITH FRAMING KIT FOR DRY WALL CEILING
3 x 3 9 CELLS
AIR SUPPLY/RETURN
STATIC
3-40 W/T5/BX
"
4PLA-22FK-340X-9
4PLS-22FK-340X-9
3 x 3 9 CELLS
AIR SUPPLY/RETURN
STATIC
3-31 W/T8/U
"
4PLA-22FK-331-9
4PLS-22FK-331-9
AIR SUPPLY/RETURN
STATIC
4-17 W/T8
"
4PLA-22FK-417-16
4PLS-22FK-417-16
4 x 4 16 CELLS
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code
on PAGE 27, or consult factory.
EERLESS
E LECTRIC C O. L TD
MR MAX. REVEAL
FINISH see page 71
19
4" DEEP CELL, AIR HANDLING PARABOLIC LUMINAIRES
2' x 4'
Maximum shielding for visual comfort.
4PL
4" deep cell , parabolic semi-specular aluminum louver.
Mitered interlocked corners.
Air supply / return, or static.
Louver retained with T-hinges and spring loaded cam
latches.
20
Air control / damper blades optional with cold air handling
units.
Steel housing finished with baked white polyester powder.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
2' x 4'
T-GRID CEILING
6 3/4"
23 3/4"
AIR FUNCTIONS
LAMPS
AIR SUPPLY / RETURN
2-32 W/T8
4PLA-24G-232-12
"
4PLS-24G-232-12
3-32 W/T8
4PLA-24G-332-18
"
4PLS-24G-332-18
4-32 W/T8
4PLA-24G-432-32
"
4PLS-24G-432-32
STATIC
CAT. NO.
2 x 6 12 CELLS
AIR SUPPLY / RETURN
6 3/4"
23 3/4"
STATIC
3 x 6 18 CELLS
6 3/4"
AIR SUPPLY / RETURN
23 3/4"
STATIC
4 x 8 32 CELLS
2' x 4'
WITH FRAMING KIT FOR DRY WALL CEILING
AIR SUPPLY / RETURN
STATIC
2-32 W/T8
"
4PLA-24FK-232-12
4PLS-24FK-232-12
3 x 6 18 CELLS
AIR SUPPLY / RETURN
STATIC
3-32 W/T8
"
4PLA-24FK-332-18
4PLS-24FK-332-18
4 x 8 32 CELLS
AIR SUPPLY / RETURN
STATIC
4-32 W/T8
"
4PLA-24FK-432-32
4PLS-24FK-432-32
2 x 6 12 CELLS
MR MAX. REVEAL
FINISH see page 71
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code
on PAGE 27, or consult factory.
EERLESS
E LECTRIC C O. L TD
3" OR 2" DEEP CELL, AIR HANDLING PARABOLIC LUMINAIRES
3PL OR 2PL
1' x 4'
Maximum shielding for visual comfort.
3" or 2" deep cell parabolic semi-specular
aluminum louver. Interlocked mitered corners.
Air functions, air supply / return, or static.
Air control blades available as an option for cold air
handling units.
Louver is retained with T- hinges and spring loaded
cam latches.
Steel housing. Baked white polyester powder finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
3PL 1' x 4'
T-GRID CEILING
6 3/4"
11 3/4"
1x8
CAT. NO.
AIR FUNCTIONS
LAMPS
AIR SUPPLY / RETURN
1-32 W/T8
3PLA-14G-132-8
"
3PLS-14G-132-8
2-32 W/T8
3PLA-14G-232-16
"
3PLS-14G-232-16
1-32 W/T8
2PLA-14G-132-8
"
2PLS-14G-132-8
2-32 W/T8
2PLA-14G-232-16
"
2PLS-14G-232-16
STATIC
8 CELLS
6 3/4"
AIR SUPPLY / RETURN
11 3/4"
STATIC
2 x 8 16 CELLS
2PL 1' x 4'
T-GRID CEILING
AIR SUPPLY / RETURN
5 3/4"
11 3/4"
1x8
STATIC
8 CELLS
AIR SUPPLY / RETURN
5 3/4"
11 3/4"
STATIC
2 x 8 16 CELLS
MR MAX. REVEAL
FINISH see page 71
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code
on PAGE 27, or consult factory.
EERLESS
E LECTRIC C O. L TD
21
3" OR 2" DEEP CELL, AIR HANDLING PARABOLIC LUMINAIRES
3PL OR 2PL
2' x 2'
Maximum shielding for visual comfort.
3" or 2" deep cell, parabolic semi- specular
aluminum louver. Interlocked mitered corners.
Air functions, cold air supply / return, or static. Air
control blades are available as an option.
22
Recessed air apertures along 2 sides of luminaire housing.
Louver assembly retained with T-hinges and spring loaded
cam latches.
Steel housing, white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
3PL 2' x 2'
T-GRID CEILING
AIR FUNCTION
LAMPS
AIR SUPPLY/RETURN
5 3/4"
23 3/4"
3 x 3 9 CELLS
5 3/4"
3-40 W/T5/BX
STATIC
"
AIR SUPPLY/RETURN
23 3/4"
3-31 W/T8/U
STATIC
"
CAT. NO.
3PLA-22G-340X-9
3PLS-22G-340X-9
3PLA-22G-331-9
3PLS-22G-331-9
3 x 3 9 CELLS
AIR SUPPLY/RETURN
5 3/4"
23 3/4"
STATIC
4-17 W/T8
3PLA-22G-417-16
"
3PLS-22G-417-16
4 x 4 16 CELLS
2PL 2' x 2'
T-GRID CEILING
4 3/4"
AIR SUPPLY/RETURN
23 3/4"
3 x 3 9 CELLS
3-40 W/T5/BX
STATIC
"
AIR SUPPLY/RETURN
4 3/4"
23 3/4"
3-31 W/T8/U
STATIC
"
2PLA-22G-340X-9
2PLS-22G-340X-9
2PLA-22G-331-9
2PLS-22G-331-9
3 x 3 9 CELLS
AIR SUPPLY/RETURN
4 3/4"
23 3/4"
STATIC
4-17 W/T8
2PLA-22G-417-16
"
2PLS-22G-417-16
4 x 4 16 CELLS
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code
on PAGE 27, or consult factory.
EERLESS
E LECTRIC C O. L TD
MR MAX. REVEAL
FINISH see page 71
3" OR 2" DEEP CELL, AIR HANDLING PARABOLIC LUMINAIRES
2' x 4'
Maximum efficiency, superior distribution.
3PL OR 2PL
3" or 2" deep cell , parabolic semi-specular aluminum
louver. Mitered interlocked corners.
Air supply / return, or static.
Louver retained with T-hinges and spring loaded cam latches.
Air control / damper blades optional with cold air handling
units.
Steel housing finished with baked white polyester powder.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
3PL 2' x 4'
T-GRID CEILING
AIR FUNCTIONS
LAMPS
AIR SUPPLY / RETURN
5 3/4"
23 3/4"
CAT. NO.
2-32 W/T8
3PLA-24G-232-12
"
3PLS-24G-232-12
3-32 W/T8
3PLA-24G-332-18
"
3PLS-24G-332-18
4-32 W/T8
3PLA-24G-432-32
"
3PLS-24G-432-32
AIR SUPPLY / RETURN
STATIC
2-32 W/T8
"
2PLA-24G-232-12
2PLS-24G-232-12
AIR SUPPLY / RETURN
STATIC
3-32 W/T8
"
2PLA-24G-332-18
2PLS-24G-332-18
AIR SUPPLY / RETURN
STATIC
4-32 W/T8
"
2PLA-24G-432-32
2PLS-24G-432-32
STATIC
2 x 6 12 CELLS
AIR SUPPLY / RETURN
5 3/4"
23 3/4"
STATIC
3 x 6 18 CELLS
5 3/4"
AIR SUPPLY / RETURN
23 3/4"
STATIC
4 x 8 32 CELLS
2PL 2' x 4'
T-GRID CEILING
4 3/4"
23 3/4"
2 x 6 12 CELLS
4 3/4"
23 3/4"
3 x 6 18 CELLS
4 3/4"
23 3/4"
4 x 8 32 CELLS
20" x 48"
20" x 60"
Luminaires are available for 20" x 48" and 20" x 60" with extension plates for T-grid ceiling.
To order these, replace CAT.NO. with 3PL 204G.... for 20" x 48" and with 3PL 205G.... for 20" x 60".
> Air control / damper blades are available as an option.
> For other ceiling type installation see numbering code
on PAGE 27, or consult factory.
EERLESS
E LECTRIC C O. L TD
MR MAX. REVEAL
FINISH see page 71
23
3" DEEP CELL, NON AIR HANDLING PARABOLIC LUMINAIRES (FOR T-GRID CEILING)
3TPLS
2' x 2' & 2' X 4'
Maximum efficiency, superior distribution.
3" nominal deep cell , parabolic semi-specular aluminum
louver. Mitered interlocked corners.
24
Static configuration only. No air functions.
Louver retained with T-hinges and twist type cam latches.
Steel housing finished with baked white polyester powder.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
2' x 2'
T-GRID CEILING
LAMPS
3 X 3 9 CELLS
4 3/4"
CAT. NO.
3-40 W/T5/BX
3TPLS-22G-340X-9
3-31W/T8/U
3TPLS-22G-331-9
2-32 W/T8
3TPLS-24G-232-12
3-32 W/T8
3TPLS-24G-332-18
4-32 W/T8
3TPLL-24G-432-32
23 3/4"
4 3/4"
3 X 3 9 CELLS
23 3/4"
2' x 4'
T-GRID CEILING
2 X 6 12 CELLS
4 3/4"
23 3/4"
3 x 6 18 CELLS
4 3/4"
23 3/4"
4 x 8 32 CELLS
4 3/4"
23 3/4"
> For other ceiling type installation see numbering code
on PAGE 27, or consult factory.
EERLESS
ELECTRIC C O. L TD
RECESSED AIR HANDLING FLUORESCENT LUMINAIRES FOR T-GRID CEILING
AOP7 - SOP7
20" x 60"
This luminaire features a reinforced one piece face
plate. No welds or visible hardware.
Parabolic aluminum louver semi-specular finish.
Cold air supply / return. ½" x 40½" air slots.
Provision for additional mounting support independent of
ceiling grid.
Steel housing, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
20" x 60"
CONTINUOUS SLOTS FOR AIR HANDLING
LAMPS
6 ½"
CAT. NO.
2-32 W/T8
AOP7-205G-232-18
2-32 W/T8
AOP7-205G-232-27
3-32 W/T8
AOP7-205G-332-27
2-32 W/T8
SOP7-205G-232-18
2-32 W/T8
SOP7-205G-232-27
3-32 W/T8
SOP7-205G-332-27
19 7/8"
NO AIR SLOTS FOR STATIC VERSION
6 ½"
19 7/8"
LUMINAIRES ARE ALSO AVAILABLE FOR 500 mm x 1500 mm METRIC CEILING GRID.
HT SPECULAR
see
EERLESS
E LECTRIC C O. L TD
page
70
25
RECESSED PARABOLIC FLUORESCENT LUMINAIRES FOR T-GRID CEILING
Recessed lay-in luminaire for T-grid ceiling.
NDLC
Shallow profile, 4¼" deep housing.
With a 32 cell deep parabolic aluminum louver for high
quality lighting.
26
Meets the recommended IES RP-1 criteria.
Framed louver with unique hook hinges and positive
action cam latches.
Rigid die embossed steel housing. Baked white
polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
1' x 4'
LAMPS
4 1/4"
CAT. NO.
2-32 W/T8
NDLC-14G-232-32
11-7/8"
Aesthetically pleasing and functional luminaire for
30" x 30" ceiling grid.
CL
Black perimeter reveal simulates a floating frame.
Parabolic aluminum louver with 16 cells, 4"deep.
Extruded aluminum frames are retained with pull
down torsion springs.
Air handling capabilities, supply / return, or static.
Multiple options available, in lamps, ballast, louvers,
and frames.
Steel housing, baked white finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
30" x 30"
AIR FUNCTION
FRAME
LAMPS
CAT. NO.
FLUSH
2-40 W/TT5/BX
CLSF-30G-240X-16
REGRESSED
2-40 W/TT5/BX
CLSRS-30G-240X-16
FLUSH
2-40 W/TT5/BX
CLAF-30G-240X-16
REGRESSED
2-40 W/TT5/BX
CLARS-30G-240X-16
STATIC
6½"
29-5/8"
AIR SUPPLY/
RETURN
EXTRUDED ALUMINUM FRAMES:
FLUSH FRAME
ALSO AVAILABLE FOR A METRIC GRID CEILING
750mm x 750mm
REGRESSED 45° FRAME
45°
MR MAX. REVEAL
FINISH see page 71
"F"
EERLESS
E LECTRIC C O. L TD
"RS"
3/4"
2PL, 3PL, 4PL, 3TPLS,
CAT. NO.
3PL
A
_ 22
series
G
CATALOG NUMBERING CODE
_
2
32
_
16W
120
EL
SERIES
2PL
3PL
4PL
3TPLS (STATIC)
BALLAST
EL = Electronic
AIR FUNCTIONS
VOLTS
A = Air supply
S = Static
120, 277,
MODULE
347.
SHIELDING (no. of cells)
14 = 1' x 4'
22 = 2' x 2'
24 = 2' x 4'
204 = 20" x 48"
205 = 20" x 60"
515 = 500mm x 1500mm
1' x 4'
2' x 2'
OPTION
2' x 4'
D = Air control damper
CEILING TYPE
8 =1x8
16 = 2 x 8
9=3x3
16 = 4 x 4
12 = 2 x 6
18 = 3 x 6
32 = 4 x 8
( finishes)
G = T-grid
S = specular
SS = semi-specular
W = white
NUMBER OF LAMPS
1, 2, 3, 4.
LAMP WATTS
(1, 2) 32 W/T8
1' x 4'
(3) 40W/T5/BX
AIR CONTROL DAMPER
Optional for Air Supply / Return Units
CEILING TYPES:
2' x 2'
(3) 31W/T8/U
(4) 17W/T8
2' x 4'
(2, 3, 4) 32 W/T8
AIR FUNCTIONS:
EXPOSED "T" GRID
AIR SUPPLY / RETURN
Type "G"
FOR OTHER
CEILING SYSTEMS
CONSULT FACTORY.
DRYWALL FRAMING KIT
SPRING LOADED CAM LATCH
Type "FK"
EERLESS
ELECTRIC C O. L TD
STATIC
27
RECESSED FLUORESCENT LUMINAIRES FOR T-GRID CEILING 1' X 4'
LACH
2' X 2'
2' X 4'
Recessed lay-in luminaires for T-GRID ceiling.
Shallow profile, 4¼" deep housing.
Steel framed lens with hook hinges and positive action
cam latches can be installed from either side.
28
No.12 clear acrylic diffuser supplied as standard.
See other options below.
Rigid die embossed steel housing. White finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
FLUSH HINGED STEEL FRAME WITH DIFFUSER
1' x 4'
T-GRID CEILING
LAMPS
4 1/4"
CAT. NO.
1-32 W/T8
LACH-14G-132-12
2-32 W/T8
LACH-14G-232-12
4-17 W/T8
LACH-22G-417-12
2-31 W/T8/U/6
LACH-22G-231-12
2-40 W/TT5/BX
LACH-22G-240X-12
3-40 W/TT5/BX
LACH-22G-340X-12
2-32 W/T8
LACH-24G-232-12
3-32 W/T8
LACH-24G-332-12
4-32 W/T8
LACH-24G-432-12
11 7/8"
4 1/4"
11 7/8"
2' x 2'
4 1/4"
23 3/4"
4 1/4"
23 3/4"
2' x 4'
4 1/4"
23 3/4"
4 1/4"
23 3/4"
4 1/4"
23 3/4"
Regressed aluminum frames are available for all models.
To order, add AR after the lens pattern in the Cat. No.
Ex: LACH-24G-232-12AR
OPTIONAL DIFFUSERS AVAILABLE
45°
3/4"
-19 = #19 pattern clear acrylic.
-SLA = ½" x ½" x ½" acrylic silver parabolic.
MR MAX. REVEAL
FINISH see page 71
HT
SPECULAR
see specs.& p.70
Conversion kits are available for luminaires
-P3A = 3" x 3" x 1½" acrylic silver parabolic.
intended for drywall ceilling installations.
-200 = 2" x 2" x 1½" parabolic aluminum louver
To order a luminaire with a conversion kit:
Add "FK" at end of cat. number.
EERLESS
E LECTRIC C O. L TD
REPLACE _-12- in CAT. NO. with your selection.
SHALLOW PROFILE RECESSED FLUORESCENT LUMINAIRES FOR T-GRID CEILING
LACH3
Recessed lay-in luminaire for T-grid ceiling.
High performance. Extremely shallow profile, 3¼"
deep housing.
Steel framed lens with unique hook hinges and positive
action cam latches.
No. 12 clear prismatic acrylic diffuser supplied as
standard.
Rigid die embossed steel housing. Baked white finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
1' x 4'
3-1/4"
LAMPS
CAT. NO.
1-32 W/T8
LACH3-14G-132-12
2-32 W/T8
LACH3-14G-232-12
2-31 W/T8/U
LACH3-22G-231-12
2-32 W/T8
LACH3-24G-232-12
3-32 W/T8
LACH3-24G-332-12
11-7/8"
3 1/4"
11-7/8"
2' x 2'
3-¼"
23-7/8"
2' x 4'
3-¼"
23-7/8"
3-¼"
23-7/8"
OPTIONAL DIFFUSERS AVAILABLE
Conversion kits are available for luminaires
intended for drywall ceilling installations.
To order a luminaire with a conversion kit:
Add "FK" at end of cat. number.
-19 = #19 pattern clear acrylic lens.
-SLA = ½" x ½" x ½" acrylic silver parabolic louver.
-P5 = ¾" x ¾" x ½" acrylic silver parabolic louver.
-P4 = 1½" x 1½" x 1" acrylic silver parabolic louver.
REPLACE _-12- in CAT. NO. with your selection.
MR MAX. REVEAL
FINISH see page 71
HT
EERLESS
E LECTRIC C O. L TD
SPECULAR
see
page
70
29
PREMIUM RECESSED FLUORESCENT LUMINAIRES FOR T-GRID CEILING
SL
Luminaires with integrated hinged framed diffuser.
Steel frame of welded construction, with positive latching.
Frame is retained with pin hinges and a slide
latching device fastened with thumb screws.
30
Supplied with no. 12 clear acrylic diffuser. Other lens
options are available, consult factory.
Interior white reflector.
Steel housing. Baked white polyester finish.
Standard units are equipped with electronic ballast rated for
120 Vac., 60 Hz. Other ballasts are available on request.
1' x 4'
4 3/4"
LAMPS
CAT. NO.
1-32 W/T8
SL-14G-132-12
2-32 W/T8
SL-14G-232-12
4-17 W/T8
SL-22G- 417-12
2-31 W/T8/U6
SL-22G-231-12
2-32 W/T8
SL-24G-232-12
3-32 W/T8
SL-24G-232-12
4-32 W/T8
SL-24G-432-12
11 3/4"
4 3/4"
11 3/4"
2' x 2'
4 3/4"
23 3/4"
4 3/4"
23 3/4"
2' x 4'
4 3/4"
23 3/4"
4 3/4"
23 3/4"
4 3/4"
23 3/4"
For Protected series with tamper resistant screws and polycarbonate or acrytuf lens consult factory.
Conversion kits are available for luminaires
intended for drywall ceilling installations.
To order a luminaire with a conversion kit:
Add "FK" at end of cat. number.
MR MAX. REVEAL
FINISH see page 71
HT
SPECULAR
see
page
70
EERLESS
E LECTRIC C O. L TD
RECESSED AIR HANDLING FLUORESCENT LUMINAIRES FOR T-GRID CEILING
AOP - SOP
20" x 60"
This luminaire features a reinforced one piece
face plate. No welds or visible hardware.
AOP - Cold air supply / return. ½" x 40½" air slots.
SOP - Static version.
Provision for additional mounting support independent
of ceiling grid.
Lay-in self centering no. 12 acrylic lens.
Other lens and frame options are available see PAGE 33.
Steel housing, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
20" x 60"
AOP CONTINUOUS SLOTS FOR AIR HANDLING
LAMPS
4 7/8"
CAT. NO.
2-32 W/T8
AOP-205G-232-12
3-32 W/T8
AOP-205G-332-12
2-32 W/T8
SOP-205G-232-12
3-32 W/T8
SOP-205G-332-12
20"
4 7/8"
20"
SOP
NO SLOTS FOR STATIC VERSION
4 7/8"
20"
4 7/8"
20"
ALSO AVAILABLE FOR A METRIC GRID CEILING
500 mm x 1500 mm
Other shielding and frame options are available see PAGE 33.
MR MAX. REVEAL
FINISH see page 71
For similar units with a deep cell parabolic louver see PAGE 25.
HT
EERLESS
E LECTRIC C O. L TD
SPECULAR
see specs. & p 70
31
RECESSED AIR HANDLING LUMINAIRES FOR T-GRID CEILING
30" x 30"
Aesthetically pleasing and functional luminaire for
30" x 30" ceiling grid.
CL
Black perimeter reveal simulates a floating frame
with a clear acrylic prismatic diffuser #12.
Extruded aluminum frames are retained with pull
down torsion springs.
32
Air handling capabilities, supply / return, or static.
Multiple options available, in lamps, ballasts, louvers,
and frames.
Steel housing, baked white finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
6 1/2"
6 1/2"
29 5/8"
29 5/8"
2 lamps mounted diagonally
with parabolic louver ( LV)
2 lamps mounted diagonally
with clear prismatic lens (12)
30" x 30"
AIR FUNCTIONS
FRAME
LAMPS
CAT. NO.
FLUSH
2-25 WT8
CLSF-30-225-12
2-25 W/T8
CLSF-30-225-LV
2-25 W/T8
CLSRS-30-225-12
2-25 W/T8
CLSRS-30-225-LV
2-25 W/T8
CLAF-30-225-12
2-25 W/T8
CLAF-30-225-LV
2-25 W/T8
CLARS-30-225-12
2-25 W/T8
CLARS-30-225-LV
STATIC
REGRESSED 45°
AIR SUPPLY / RETURN
FLUSH
REGRESSED 45°
ALSO AVAILABLE FOR A METRIC GRID CEILING
750 mm x 750 mm
EXTRUDED ALUMINUM FRAMES:
OPTIONAL SHIELDINGS ARE AVAILABLE see Page 68.
FLUSH FRAME
"F"
MR MAX. REVEAL
FINISH see page 71
HT
page
"RS"
45°
SPECULAR
see
REGRESSED 45° FRAME
70
EERLESS
E LECTRIC C O. L TD
3/4"
AOP, SOP, CLA, CLS
CAT. NO.=
SOP
_ 205
series
G
_
CATALOG NUMBERING CODE
2
32
_ 12
_
00
_ 120
EL
BALLAST
SERIES
AOP
SOP
CLA
CLS
(air handling)
(static)
( air handling)
( static)
EL = Electronic
VOLTS
120
277
347
MODULE
205 = 20" x 60" - AOP, SOP
30 = 30" x 30" - CLA, CLS.
FRAMES (Lift and shift)
CEILING TYPE
00 = No frame
SF = Steel frame
AF = Extruded aluminum flush
AR = Extruded aluminum
regressed
AS = Aluminum & steel combo
G = T-grid
SHIELDINGS
NUMBER OF LAMPS
12 = No. 12 acrylic lens
19 = No. 19 acrylic lens
SL = Parabolic silver louver
2, 3.
LAMP WATTS
20" x 60"
(2,3,)
32 W/T8
30" x 30"
(2)
25 W/T8
ALUMINUM AND STEEL FRAME
"AS"
STEEL FRAME
"SF"
EXTRUDED ALUMINUM
FLUSH FRAME
"AF"
EERLESS
EXTRUDED ALUMINUM
REGRESSED FRAME
"AR"
E LECTRIC C O. L TD
33
RECESSED LINEAR OPEN TROFFER FOR LAY-IN T-GRID CEILING
Commercial linear open downlight troffer for inverted T-grid ceiling system.
RSL
Conceived for continuous row installation in a commercial environment.
Provision provided for suspension independent of ceiling grid.
Bridge support also serves as a T-grid stabilizer.
34
Accessories listed below are required to complete
installation.
Steel housing, baked white polyester finish.
Units for rapid start lamps are equipped with electronic
ballast rated for 120 Vac., 60 Hz. Magnetic ballasts are
supplied for Slimline, and HO lamps. Other ballasts are
available on request.
T-GRID CEILING
LAMPS
LENGTH
CAT. NO.
2- 32 W/T8
48"
RSL-14G-232
4-32 W/T8
96"
RSL-14G-432
2-59 W/T8/SL
96"
RSL-18G-259
2-110 W/T12/HO
96"
RSL-18G-2110
16"
9 1/4"
7"
12"
ACCESSORIES
CAT. NO. = RSL-B
CAT. NO. = RSL-D
Mounting bridge for fixture suspension.
For continuous row installation:
(1) required / 4' section.
(2) required / 8' section.
End plate for end of row
installation.
(2) required / row or per
individual installation.
METHOD OF INSTALLATION
Mounting bridge joins (2)
troffers in continuous row
installation.
A
B
C
A - Independent suspension
B - Alignment slot for main
"T"- bar
C - Hole provided for securing
cross "T" runner
CONVENIENCE FEATURE:
MR MAX. REVEAL
FINISH see page 71
BALLAST ACCESSIBLE FROM THE
HT SPECULAR
see
page
ROOM SIDE FOR EASY SERVICING.
70
EERLESS
ELECTRIC C O. L TD
MODULAR SURFACE MOUNTED DOWNLIGHTING
LX
Fluorescent downlight for surface mounting.
Frameless lay-in style no. 12 clear acrylic prismatic
lens is supplied as standard.
Other lens and frame options available.See below for
selections.
Frames are retained with pin hinges, and are of the lift
and shift type for removal or servicing.
Steel enclosure, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
6" x 4'
LAY-IN FRAMELESS LENS
LAMPS
5 3/16"
LENGTH
CAT. NO.
1-32 W/T8
48"
LX-6-132-12
2-32 W/T8
48"
LX-6-232-12
2-32 W/T8
48"
LX-14-232-12
4-17 W/T8
24"
LX-22-417-12
2-31 W/T8/U
24"
LX-22-231-12
2-40 W/TT5/BX
24"
LX-22-240X-12
2-32 W/T8
48"
LX-24-232-12-SF
4-32 W/T8
48"
LX-24-432-12-SF
6"
5 3/16"
6"
1' x 4'
LAY-IN FRAMELESS LENS
3 3/4"
12 1/4"
2' x 2'
LAY-IN FRAMELESS LENS
3 3/4"
24 1/4"
3 3/4"
24 1/4"
2' x 4'
SUPPLIED WITH LAY-IN FRAMED LENS
3 3/4"
24 1/4"
3 3/4"
24 1/4"
NOTE: Units with side mounted ballasts will be converted to center mounted ballasts for luminaires
intended for rod suspension. Add "CB" to cat. number.
COMPLETE ORDERING GUIDE > CAT. NO. EX:LX
SERIES
22
MODULE
231
12
LAMPS
LENS
12 = NO. 12 PATTERN
19 = NO. 19 PATTERN
SL = SILVER LOUVER
00
FRAME
120
VOLTS
HT SPECULAR
see specs. & p.70
EL
FOR REFLECTOR ONLY
IF SUPPLIED
BALLAST
120
EL = ELECTRONIC
277
347
00 = FRAMELESS
SF = STEEL FLUSH
AF = ALUMINUM FLUSH
AR = ALUMINUM REGRESSED
HL = HINGED AND LATCHED
EERLESS
E LECTRIC C O. L TD
MR MAX. REVEAL
FINISH see page 71
FOR HOUSING ONLY
35
LUMINAIRES FOR SURFACE MOUNTING WITH HOLOPHANE REFRACTORS or PRISMATIC LENS
Fluorescent luminaires for surface mounting.
PF or PFK
Up light component reduces ceiling contrast.
Available with injection moulded clear acrylic wrap-around
HOLOPHANE refractor or a prismatic lens pattern #19 at
bottom with linear prismatic sides. Integral end caps.
36
Concealed spring loaded pin hinges. Refractor opens
either side for servicing.
Suitable for surface or pendant installations
Steel enclosure, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
CAT. NO
"L"
LAMPS
HOLOPHANE
LENS
PRISMATIC
LENS #19
48"
1-32W/T8
PF-4-132-6100
PFK-4-132-1904
96"
2-32 W/T8†
PF-8-232-6100
PFK-8-232-1904
48"
1-32 W/T8
PF-4-132-7100
PFK-4-132-1908
96"
2-32 W/T8†
PF-8-232-7100
PFK-8-232-1908
48"
2-32 W/T8
PF-4-232-7100
PFK-4-232-1908
96"
4-32 W/T8†
PF-8-432-7100
PFK-8-432-1908
48"
2-32 W/T8
PF-4-232-7400
PFK-4-232-1913
48"
3-32 W/T8
PF-4-332-7400
PFK-4-332-1913
48"
4-32 W/T8
PF-4-432-7400
PFK-4-432-1913
4 5/8"
4 3/4"
4 3/8"
8 5/8"
4 3/8"
8 5/8"
4 3/8"
13 1/2"
4 3/8"
13 1/2"
4 3/8"
13 1/2"
† TANDEM UNITS
MR MAX. REVEAL
FINISH see page 71
HT
SPECULAR
see specs. & p. 70
EERLESS
ELECTRIC C O. L TD
CEILING AND WALL MOUNTED SURFACE LUMINAIRES
PEL
Ceiling mounted fluorescent luminaire for indoor
applications.
Clear acrylic prismatic wrap-around diffuser
provides optimum light output.
Suitable for continuous row mounting.
Steel enclosure, baked white finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
SURFACE AND WALL MOUNTED
LAMPS
4 1/2"
LENGTH
CAT. NO.
1-17 W/T8
24"
PEL-41-117
1-25 W/T8
36"
PEL-41-125
1-32 W/T8
48"
PEL-41-132
2-17 W/T8
24"
PEL-41-217
2-25 W/T8
36"
PEL-41-225
2-32 W/T8
48"
PEL-41-232
2-17 W/T8
24"
PEL-51-217
2-32 W/T8
48"
PEL-51-232
2-32 W/T8
48"
PEL-61-232
4-32 W/T8
48"
PEL-61-432
4 1/2"
4 1/2"
4 1/2"
SURFACE MOUNTED
3 1/2"
7 1/8"
3 1/2"
12 3/4"
3 1/2"
12 3/4"
OPTIONS:
For a black exterior finish with a prismatic diffuser replace PEL with PELB in cat. number.
A black exterior finish with a white opal diffuser replace PEL with PELOB in cat. number.
For a white exterior finish with a white opal diffuser replace PEL with PELO in cat. number.
EERLESS
E LECTRIC C O. L TD
MR MAX. REVEAL
FINISH see page 71
HT
SPECULAR
see specs. & p. 70
37
SHALLOW PROFILE - LUMINAIRES FOR SURFACE MOUNTING
KOPA
Shallow profile fluorescent luminaires for surface or
pendant mounting.
Clear acrylic prismatic wrap-around diffuser with
ribbed sides for balanced lighting control.
38
A productive lighting application for multi-function
areas.
Suitable for individual or continuous row mounting.
Steel enclosure, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
SHALLOW PROFILE
LAMPS
LENGTH
CAT. NO.
2-32 W/T8
48"
KOPA-114-232
4-32 W/T8†
96"
KOPA-118-432
2-32 W/T8
48"
KOPA-154-232
4-32 W/T8
48"
KOPA-154-432
LAMPS
LENGTH
CAT. NO.
1-32 W/T8
48"
KOPA-S-114-132
2-32 W/T8†
96"
KOPA-S-118-232
2-32 W/T8
48"
KOPA-S-114-232
4-32 W/T8†
96"
KOPA-S-118-432
3-32 W/T8
48"
KOPA-S-114-332
4-32 W/T8
48"
KOPA-S-114-432
3"
11"
3"
15 1/2"
3"
15 1/2"
† TANDEM
SHALLOW-COMPACT PROFILE
3-¾"
11-1/8"
3-¾"
11-1/8"
3-¾"
11-1/8"
3-¾"
11-1/8"
† TANDEM
MR MAX. REVEAL
FINISH see page 71
HT
SPECULAR
see specs. & p.70
EERLESS
E LECTRIC C O. L TD
LUMINAIRES FOR SURFACE MOUNTING
KOPA -D
Fluorescent luminaires for surface or pendant
mounting.
Clear acrylic prismatic wrap-around diffuser with
ribbed sides for balanced lighting control.
39
A productive lighting application for multi-function
areas.
Suitable for individual or continuous row mounting.
Steel enclosure, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
NARROW PROFILE
4-1/2"
6-1/4"
PARALLEL BLADE LOUVER IS AVAILABLE AS AN OPTION
ADD "PB" TO CAT. NUMBER.
WIDE PROFILE
LAMPS
LENGTH
CAT. NO.
1-32 W/T8
48"
KOPA-D-64-132
2-32 W/T8†
96"
KOPA-D-68-232
2-32 W/T8
48"
KOPA-D-64-232
4-32 W/T8†
96"
KOPA-D-68-432
† TANDEM
LAMPS
LENGTH
CAT. NO.
1-32 W/T8
48"
KOPA-D-114-132
2-32 W/T8†
96"
KOPA-D-118-232
2-32 W/T8
48"
KOPA-D-114-232
4-32 W/T8†
96"
KOPA-D-118-432
3-32 W/T8
48"
KOPA-D-114-332
6-32 W/T8†
96"
KOPA-D-118-632
4-½"
11"
4-½"
11"
4-½"
11"
† TANDEM
MR MAX. REVEAL
FINISH see page 71
HT
EERLESS
ELECTRIC C O. L TD
SPECULAR
see
page
70
LUMINAIRES FOR SURFACE MOUNTING WITH WRAPAROUND SHIELDING
PMA
Fluorescent luminaires featuring wrap-around acrylic
diffuser with clear prismatic bottom and white
translucent ribbed sides. Provides viewing comfort
at distant angles.
40
Suitable for surface or pendant installation, individually or in continuous rows.
Die formed steel backplate. Baked white finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
SURFACE MOUNTED
LAMPS
LENGTH
CAT. NO.
2-32 W/T8
48"
PMA-114-232
4-32 W/T8†
96"
PMA-118-432
2-32 W/T8
48"
PMA-164-232
4-32 W/T8
48"
PMA-164-432
3 7/8"
11 1/16"
3 7/8"
16 3/8"
3 7/8"
16 3/8"
† TANDEM
EERLESS
ELECTRIC C O. L TD
CEILING MOUNTED SURFACE LUMINAIRES
Cloudline
Ceiling mounted fluorescent luminaire for indoor
applications.
Completely luminous modules. Dropped opalescent
white acrylic diffuser provides well diffused illumination.
Black regressed housing with a white reflective interior.
A white housing is available on request.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
LAMPS
CAT. NO.
1' x 4'
5 7/8"
2-32 W/T8
9344-232
4-17 W/T8
9354-417
2-31 W/T8/ U
9354-231
4-32 W/T8
9364-432
4-32 W/T8
9366-432
14½" W x 51" L
2' x 2' Linear lamps
5 7/8"
26" W x 27½" L
2' x 2'
'U" LAMPS
5 7/8"
26" W x 27½" L
18" x 4'
5-7/8"
18" W x 51" L
2' X 4'
5 7/8"
26" W x 51" L
To specify a white housing add suffix "W" at end of cat. number.
EERLESS
E LECTRIC C O. L TD
41
LUMINAIRES FOR CEILING or WALL MOUNTING
CI
CN
42
One lamp.
One or two lamps.
White opal acrylic wrap-around diffuser.
White opal acrylic wrap-around diffuser.
Spring loaded end covers.
Spring loaded end covers.
Baked enamel finish - white or black.
Baked enamel finish - white or black.
Ceiling or wall mounting.
Ceiling or wall mounting.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
4 1/2"
6 1/2"
4"
4"
LAMPS
LENGTH
CAT. NO.
LAMPS
LENGTH
CAT. NO.
1-17 W/T8
24 3/4"
CIB-2-117
1-17 W/T8
24 3/4"
CNB-2-117
1-32 W/T8
48 3/4"
CIB-4-132
1-32 W/T8
48 3/4"
CNB-4-132
2-32 W/T8†
97 1/2"
CIB-8-232
2-32 W/T8†
97 1/2"
CNB-8-232
2-17 W/T8
24 3/4"
CNB-2-217
2-32 W/T8
48 3/4"
CNB-4-232
4-32 W/T8†
97 1/2"
CNB-8-432
† TANDEM UNITS
† TANDEM UNITS
NOTE: CIB & CNB models have BLACK HOUSING.
For WHITE HOUSING replace CIB or CNB
with CIW or CNW.
HT
SPECULAR
see
page
70
EERLESS
E LECTRIC C O. L TD
LUMINAIRES FOR SURFACE or WALL MOUNTING
CR
UCL
43
Wall mounted for up and down lighting.
Slim fluorescent luminaire for under cabinet lighting.
One or two lamps.
Single lamp only.
White opal acrylic wrap-around diffuser.
Lay-in clear acrylic prismatic diffuser.
Spring loaded end covers.
Black or white finish.
Baked enamel finish - white or black.
Electronic ballast.
Electronic ballast.
Under cabinet or shelf installation.
1-5/8"
4"
5-1/2"
6 1/2"
LAMPS
LENGTH CAT. NO.
1-17 W/T8
24 3/4"
LAMPS
LENGTH
1-17 W/T8
24"
UCLB-2-117
1-32 W/T8
48"
UCLB-4-132
CRB-2-117
1-32 W/T8
48 3/4"
CRB-4-132
2-32 W/T8†
97 1/2"
CRB-8-232
2-17 W/T8
24 3/4"
CRB-2-217
2-32 W/T8
48 3/4"
CRB-4-232
4-32 W/T8†
97 1/2"
CRB-8-432
† TANDEM
HT SPECULAR
see
NOTE:
page
CAT. NO.
70
CRB, and UCLB models have a BLACK HOUSING.
For a WHITE HOUSING replace CRB, or UCLB
with CRW, or UCLW.
EERLESS
E LECTRIC C O. L TD
FLUORESCENT LUMINAIRES FOR WALL MOUNTING
CVA
Wrap-around white translucent ribbed acrylic
diffuser provides soft illumination. Ideal for
installation above mirrors.
44
Individual or continuous row installation.
Optional components available as listed below.
Steel housing, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
LAMPS
ONE LAMP
4"
LENGTH
CAT. NO.
1-17 WT8
24"
CVA-2-117
1-32 W/T8
48"
CVA-4-132
2-17 W/T8
24"
CVA-2-217
2-32 W/T8
48"
CVA-4-232
5 3/4"
TWO LAMPS
4"
5 3/4"
ORDERING EX: CAT. NO. = CVA-4-132 + (OPTIONS)
OPTIONS AVAILABLE: > (add to cat. no.)
TOGGLE SWITCH
CONVENIENCE OUTLET
PULL CHAIN SWITCH
"TS"
"CS"
"CO"
WM
Fluorescent luminaire for wall mounting.
White opal acrylic diffuser.
Removable end covers for relamping or other maintenance.
Fabricated from code gauge steel. White polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
LAMPS
LENGTH
CAT. NO.
1-17 W/T8
24"
WM-2-117
1-25 W/T8
36"
WM-3-125
1-32 W/T8
48"
WM-4-132
3-5/8"
3½"
EERLESS
E LECTRIC C O. L TD
FLUORESCENT LUMINAIRES FOR GYMNASIUM
For ceiling mounting, rugged, shallow luminaires for
indoor application in recreation areas.
GP
Hinged and framed wire guard with clear acrylic
no. 12 pattern lens with or without overlay..
Rigid die formed and welded assembly.
K.O.'s provided for continuous row mounting.
Steel enclosure, baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
WIRE GUARD SHIELDING
LAMPS
4 1/4"
LENGTH
CAT. NO.
2-32 W/T8
48"
G-4-232
4-32 W/T8 (tandem)
96"
G-8-432
2-60 W/T12/HO*
48"
G-4-260
4-32 W/T8
48"
G-4-432
2-32 W/T8
48"
GP-4-232
4-32 W/T8 (tandem)
96"
GP-8-432
2-60 W/T12/HO*
48"
GP-4-260
4-32 W/T8
48"
GP-4-432
14 7/8"
4 1/4"
20"
LENS AND WIRE GUARD SHIELDING
4 1/4"
14 7/8"
4 1/4"
20"
* Units for high output lamps are supplied with HPF energy saving magnetic
MR MAX. REVEAL
FINISH see page 71
HT
ballasts rated for 120 Vac, 60Hz. Ballasts rated for 277 Vac or 347 Vac are
available on request.
SPECULAR
see
page
70
EERLESS
E LECTRIC C O. L TD
45
FLUORESCENT LUMINAIRES FOR LIGHTING VERTICAL SURFACES
Fluorescent chalkboard luminaires, also
applicable for other vertical surface lighting,
i.e. displays, maps, etc..
CBA
Specular aluminum interior reflector for precise
light control.
46
Available for wall or pendant installation in 4'
and 8' lengths.
Steel construction, baked white polyester finish.
Standard units are equipped with electronic ballast rated for
120 Vac., 60 Hz. Other ballasts are available on request.
LAMPS
WALL MOUNTING
7 3/8"
LENGTH
CAT. NO.
1-32 W/T8
48"
CBAW-4-132
2-32 W/T8†
96"
CBAW-8-232
1-32 W/T8
48"
CBAC-4-132
2-32 W/T8†
96"
CBAC-8-232
5 3/8"
24"
CEILING MOUNTING
23 3/8"
5 3/8"
7 3/8"
† TANDEM
DHIF
DOMELITE
High Intensity fluorescenet luminaire that offers a better alternative
to HID luminaires in supermarkets,warehouse distribution facilities,
mass merchandising outlets and retail stores.
They offer a unique feature of four translucent sides that give the
ability to display advertising material such as company logos,
poroduct photos and images of special items and generate
advertising revenue.
Accomodates 6,8 or 10 lamps for a power range from 144 to 640
Watts For direct downlight.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
2' x 2'
Ordering Information
Series
DHIF
Size No of lamps
22
10
Type Uplite
24T5HO
1
Type
32WPLL
Click here for Brochure, Many other options are available on request.
EERLESS
E LECTRIC C O. L TD
Volts
120
Framed shielding
SF12
WALL MOUNTED BEDLIGHTS FOR HEALTH CARE FACILITIES
HBL
Wall mounted bedlights for health care institutions.
Separate upper and lower lamp compartments
Lay-in clear prismatic diffuser top and bottom.
Full range of options:
> Convenience outlet.
> Night light, -incandescent,-compact fluorescent.
> Switching arrangement.
> Provision for flex-arm examination light.
> Left or right side installation.
Sheet metal construction. Baked white enamel
finish.
WALL MOUNTING
6"
LAMPS
LENGTH
CAT. NO.
2-32 W/T8
48"
HBL-232
3-32 W/T8
48"
HBL-332
8 3/8"
6"
8 3/8"
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
Institutional Custom Bedlights
CBL
6"
8 1/4"
CDH
Extruded aluminum housing. Natural satin finish
or designer colours. Efficient, optically designed
linear acrylic snap-in lens. Up and down light.
Available options: > convenience outlet > night
light. > switching. Consult factory for details.
3-3/8"
8-3/8"
Sheet metal construction.
Baked white finish.
1-40 W /TT5 downlight.
2-40 W /TT5 uplight
1-PL lamp for night light.
Consult factory for details.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
EERLESS
E LECTRIC C O. L TD
47
SURFACE MOUNTED LUMINAIRES FOR HAZARDOUS LOCATIONS
Approved enclosure 5, CSA class III, for intermittent
dusty areas and damp locations.
VT
Surface mounting through exterior mounting brackets.
For pipe suspension (2) ½" i.p.s. flanges are provided.
48
Clear glass shielding ¼" thick supplied with steel frame.
Continuous gasket between frame-shielding-housing.
A cut-out switch is available as an option.
Welded steel construction. Baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
SURFACE MOUNTING
LAMPS
7"
CAT. NO.
2-32 W/T8
VTC-232
3-32 W/T8
VTC-332
2-32 W/T8
VTP-232
3-32 W/T8
VTP-332
14 3/16"
7"
14 3/16"
PENDANT MOUNTING
7"
14 3/16"
7"
14 3/16"
STEM MOUNTING
1/2" I.P.S. FLANGE FOR
STEM SUSPENSION
36"
SURFACE MOUNTING
ANGLE BRACKETS FOR
CEILING MOUNTING
50 1/8"
EERLESS
E LECTRIC C O. L TD
MOULDED ONE-PIECE
NEOPRENE GASKET
RECESSED LUMINAIRES FOR HAZARDOUS LOCATIONS
Approved enclosure 5, CSA class III, for intermittent
VTU
dusty areas and damp locations.
Recessed application for drywall ceiling or other types.
Clear glass shielding ¼" thick supplied with steel frame.
Continuous gasket between frame-shielding-housing.
A cut-out switch is available as an option.
Welded steel construction. Baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
RECESSED INSTALLATION
LAMPS
CAT. NO.
2-32 W/T8
VTU-232
3-32 W/T8
VTU-332
7 1/8"
14 5/8"
7 1/8"
14 5/8"
Ceiling opening required for clearance = 13½" x 49".
Plaster frame is available as an option.
EERLESS
E LECTRIC C O. L TD
49
FIBERGLASS LUMINAIRES FOR HAZARDOUS LOCATIONS
FC - FP
Fiberglass luminaires approved for CSA class III
hazardous locations.
Continuous closed cell neoprene gasket. Dust tight
and moisture resistant.
50
Clear acrylic crepe pattern diffuser retained with
high impact plastic tension latches.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
"FC" SURFACE
RAPID START
4 3/4"
"FP" PENDANT
LAMPS
"L"
CAT. NO.
CAT. NO.
2-32 W/T8
52"
FCO-4-232†
FPO4-232†
2-32 W/T8
52"
FCC-4-232
FPC-4-232
4-32 W/T8 (tan.)
102"
FCC-8-432
FPC-8-432
1-59 W/T8/SL
102"
FCC-8-159
FPC-8-159
2-59 W/T8/SL
102"
FCC-8-259
FPC-8-259
1-86 W/T8/HO*
102"
FCC-8-186
FPC-8-186
2-86 W/T8/HO*
102"
FCC-8-286
FPC-8-286
1-110 W/T12/HO*
102"
FCC-8-1110
FPC-8-1110
2-110 W/T12/HO*
102"
FCC-8-2110
FPC-8-2110
8"
SLIMLINE / HIGH OUTPUT
5 3/4"
8"
SURFACE MOUNTING
52 1/2"
* Units for high output lamps are supplied with HPF energy saving magnetic
ballasts rated for 120 Vac, 60Hz. Ballasts rated for 277 Vac or 347 Vac are
available on request.
102 5/8"
SURFACE MOUNTING BRACKET
STEM MOUNTING
SEAL-TIGHT HUBS ½" IPS
STEM MOUNTING
32"
60"
† CAT. NO.
EERLESS
FCO
AND
ELECTRIC C O. L TD
FPO
ARE SUPPLIED WITH WHITE OPAL DIFFUSER
FIBERGLASS LUMINAIRES FOR WET or DAMP LOCATIONS
Fiberglass luminaires for wet or damp locations.
DC - DP
Continuous closed cell neoprene gasket. Dust tight
and moisture resistant.
Clear acrylic crepe pattern diffuser retained with high
impact plastic tension latches.
Surface or stem mounting.
Available for Rapid start, Slimline, and High Output
lamps.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
"DC" SURFACE
RAPID START
4 3/4"
CAT. NO.
"DP" PENDANT
LAMPS
"L"
CAT. NO.
2-32 W/T8
52"
DCO-4-232†
DPO-4-232†
2-32 W/T8
52"
DCC-4-232
DPC-4-232
4-32 W/T8 (tan.)
102"
DCC-8-432
DPC-8-432
1-59 W/T8/SL*
102"
DCC-8-159
DPC-8-159
2-59 W/T8/SL*
102"
DCC-8-259
DPC-8-259
1-86 W/T8/HO*
102"
DCC-8-186
DPC-8-186
2-86 W/T8/HO*
102"
DCC-8-286
DPC-8-286
1-110 W/T12/HO*
102"
DCC-8-1110
DPC-8-1110
2-110 W/T12/HO*
102"
DCC-8-2110
DPC-8-2110
8"
SLIMLINE / HIGH OUTPUT
5 3/4"
8"
SURFACE MOUNTING
* Units for high output lamps or slimline lamps are supplied with HPF energy
saving magnetic ballasts rated for 120 Vac, 60Hz. Ballasts rated for 277 Vac or
347 Vac are available on request.
STEM MOUNTING
SURFACE MOUNTING
COVER PLUGS PROVIDED FOR END HOLES
STEM MOUNTING
SEAL-TIGHT HUBS ½" I.P.S.
32"
60"
† CAT. NO.
EERLESS
DCO
AND
ELECTRIC C O. L TD
DPO
ARE SUPPLIED WITH WHITE OPAL DIFFUSER
51
SURFACE MOUNTED WEATHERPROOF LUMINAIRES
WP
Weatherproof gasketed luminaire for damp locations.
Zinc coated steel housing, baked white polyester finish.
52
Available with clear or white opal drop bowl diffusers.
Diffuser secured with (6) cam action latches.
Closed cell vinyl gasket around perimeter.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
CLEAR ACRYLIC DIFFUSER
4 3/4"
LAMPS
CAT. NO.
2-32 W/T8
WPC-232
3-32 W/T8
WPC-332
2-32 W/T8
WPO-232
3-32 W/T8
WPO-332
10"
4 3/4"
10"
WHITE OPAL ACRYLIC DIFFUSER
4 3/4"
10"
4 3/4"
10"
EERLESS
ELECTRIC C O. L TD
SURFACE MOUNTED SECURITY LIGHTING and VANDAL RESISTANT LUMINAIRES
SCT
All steel , welded assembly, security luminaire for
ceiling mounting.
Vandal resistant, high impact resistant acrylic
diffuser assembled in steel frame. Recommended
application where breakage hazards may exist.
Frame is retained with (6) recessed #8 screws.
Tamperproof screws available as an option.
Baked white polyester finish.
Units are equipped with electronic ballasts rated for 120
Vac., 60 Hz. Other ballasts are available on request.
- ALSO AVAILABLE WITH FLANGED TRIM FOR RECESSED MOUNTING IN DRYWALL CEILINGS.
4 1/2"
LAMPS
LENGTH
2-32 W/T8
49½"
CAT. NO.
SCT-232-12AC
12"
VR
Fluorescent luminaires with a clear polycarbonate
enclosure. Prisms on the bottom and vertical ribs on
side for maximum light control and efficiency.
Protects light source from severe impact and other
types of vandalism.
Lens retained with (6) #8 screws. Tamperproof
screws are available as an option.
Dust seal gasket provided around perimeter.
4 3/4"
LAMPS
LENGTH
CAT. NO.
1-32 W/T8
51"
VR-132
2-32 W/T8
51"
VR-232
4 3/4"
3 1/4"
9 1/2"
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
EERLESS
E LECTRIC C O. L TD
53
COMMERCIAL FLUORESCENT LIGHTING STRIPS
RAPID START LAMPS
LS and LSG
Fluorescent lighting strips for rapid start lamps.
Available with or without wire guard.
54
Combination end plate and strip connector for
continuous row installation.
Baked white enamel finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
CAT. No.
RAPID START
" L"
LESS
WIREGUARD
WITH
WIREGUARD
1-17 W/T8
24"
LS-2-117-
LSG-2-117
1-25 W/T8
36"
LS-3-125-
LSG-3-125
1-32 W/T8
48"
LS-4-132-
LSG-4-132
2-32 W/T8 (tandem)
96"
LS-8-232-
LSG-8-232
2-17 W/T8
24"
LS-2-217-
LSG-2-217
2-25 W/T8
36"
LS-3-225-
LSG-3-225
2-32 W/T8
48"
LS-4-232-
LSG-4-232
4-32 W/T8 (tandem)
96"
LS-8-432-
LSG-8-432
LAMPS
2 3/4"
3 3/4" max.
WITH WIRE GUARD
4 3/4"
4"
4 1/4"
3 1/2" max.
WITH WIRE GUARD
4 3/4"
5 3/4"
EERLESS
E LECTRIC C O. L TD
COMMERCIAL FLUORESCENT STRIPS
SLIMLINE and HIGH OUTPUT LAMPS
LSS-LSHO / G
General purpose strip lighting. Available with or
without wireguard.
Rapid start HO 800 MA. - Slimline 425 MA.
Individual or tandem wired, 4' to 16'.
End plates serve as connectors for continuous row
mounting.
Suitable for surface, stem, or chain mounting.
Baked white enamel finish.
Units are equipped with magnetic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
CAT No.
SLIMLINE
LAMPS
4 1/4"
" L"
LESS
WIREGUARD
WITH
WIREGUARD
1-59 W/T8/SL
8'
LSS-8-159
LSSG-8-159
2-59 W/T8/SL†
16'
LSS-16-259
LSSG-16-259
1-75 W/T12/SL
8'
LSS-8-175
LSSG-8-175
2-75 W/T12/SL†
16'
LSS-16-275
LSSG-16-275
2-59 W/T8/SL
8'
LSS-8-259
LSSG-8-259
2-75 W/T12/SL
8'
LSS-8-275
LSSG-8-275
1-60 W/T12/HO
4'
LSHO-4-160
LSHOG-4-160
2-60 W/T12/HO†
8'
LSHO-8-260
LSHOG-8-260
1-86 W/T8/HO
8'
LSHO-8-186
LSHOG-8-186
2-86 W/T8/HO†
16'
LSHO-16-286
LSHOG-16-286
1-110 W/T12/HO
8'
LSHO-8-1110
LSHOG-8-1110
2-110 W/T12/HO†
16'
LSHO-16-2110
LSHOG-16-2110
2-60 W/T12/HO
4'
LSHO-4-260
LSHOG-4-260
2-86 W/T8/HO
8'
LSHO-8-286
LSHOG-8-286
2-110 W/T12/HO
8'
LSHO-8-2110
LSHOG-8-2110
3 3/4"
4 1/4"
3 3/4"
WITH WIRE GUARD
4 3/4"
5 3/4"
HIGH OUTPUT
4 1/4"
4 7/8"
WITH WIRE GUARD
6 1/2"
5 1/4"
4 1/4"
4 7/8"
† TANDEM
EERLESS
E LECTRIC C O. L TD
55
MINI - LIGHTING STRIPS FOR MINIATURE BIPIN T5 LAMPS
NSL
For surface mounting. A lighting strip for use with
miniature fluorescent lamps. Available with or without a
reflector.
56
General utility applications.
Designed to accomodate rapid start or high output lamps.
All steel construction. Baked white enamel finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
WITH MINIATURE BIPIN (G5) LAMPHOLDERS
for RAPID START lamps
1-3/4"
1-1/2"
1-3/4"
1-1/2"
2-1/2"
1-1/2"
2-1/2"
1-1/2"
ASYMETRIC DISTRIBUTION
1-3/4"
1-1/2"
for HIGH OUTPUT lamps
"L"
LAMPS
CAT. NO.
"L"
LAMPS
CAT. NO.
22-1/2"
34-1/4"
46"
58"
1-14 W/T5
1-21 W/T5
1-28 W/T5
1-35 W/T5
NSL-2-114
NSL-3-121
NSL-4-128
NSL-5-135
92"†
2-28 W/T5
NSL-8-228
22-1/2"
34-1/4"
46"
58"
58"
92"†
1-24 W/T5
1-39 W/T5
1-54 W/T5
1-49 W/T5
1-80 W/T5
2-54 W/T5
NSLH-2-124
NSLH-3-139
NSLH-4-154
NSLH-5-149
NSLH-5-180
NSLH-8-254
22-1/2"
34-1/4"
46"
58"
1-14WT5
1-21 W/T5
1-28 W/T5
1-35 W/T5
NSLS-2-114
NSLS-3-121
NSLS-4-128
NSLS-5-135
92"†
2-28 W/T5
NSLS-8-228
22-1/2"
34-1/4"
46"
58"
58'
92"†
1-24 WT5
1-39 W/T5
1-54 W/T5
1-49 W/T5
1-80 W/T5
2-54 W/T5
NSLSH-2-214
NSLSH-3-139
NSLSH-4-154
NSLSH-5-149
NSLSH-5-180
NSLSH-8-254
22-1/2"
34-1/4"
46"
58"
2-14 W/T5
2-21 W/T5
2-28 W/T5
2-35 W/T5
NSL-2-214
NSL-3-221
NSL-4-228
NSL-5-235
92"†
4-28 W/T5
NSL-8-428
22-1/2"
34-1/4"
46"
58"
58"
92"†
2-24 W/T5
2-39 W/T5
2-54 W/T5
2-49 W/T5
2-80 W/T5
4-54 W/T5
NSLH-2-224
NSLH-3-239
NSLH-4-254
NSLH-5-249
NSLH-5-280
NSLH-8-454
22-1/2"
34-1/4"
46"
58"
2-14 W/T5
2-21 W/T5
2-28 W/T5
2-35 W/T5
NSLS-2-214
NSLS-3-221
NSLS-4-228
NSLS-5-235
92"†
4-28 W/T5
NSLS-8-428
22-1/2"
34-1/4"
46"
58"
58"
92"†
2-24 W/T5
2-39 W/T5
2-54 W/T5
2-49 W/T5
2-80 W/T5
4-54 W/T5
NSLSH-2-224
NSLSH-3-239
NSLSH-4-254
NSLSH-5-249
NSLSH-5-280
NSLSH-8-454
22-1/2"
34-1/2"
46"
58"
1-14 W/T5
1-21 W/T5
1-28 W/T5
1-35 W/T5
NSLA-2-114
NSLA-3-121
NSLA-4-128
NSLA-5-135
92"†
2-28 W/T5
NSLA-8-228
22-1/2"
34-1/2
46"
58"
58"
92"†
1-24 W/T5
1-39 W/T5
1-54 W/T5
1-49 W/T5
1-80 W/T5
2-54 W/T5
NSLA-2-124
NSLA-3-139
NSLA-4-154
NSLA-5-149
NSLA-5-180
NSLA-8-254
†=TANDEM
HT SPECULAR
see
page
70
EERLESS
E LECTRIC C O. L TD
SYMMETRIC and ASYMMETRIC REFLECTOR STRIPS
ILS - ALS
General utility reflector strips for surface mounting.
Symmetric or asymmetric light distribution.
57
Single and double lamp units in 4' or 8' lengths with
4' lamps in tandem.
All steel construction. Baked white enamel finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
SYMMETRIC
LAMPS
LENGTH
CAT. NO.
1-32 W/T8
48"
ILS-4-132
2-32 W/T8 (tandem)
96"
ILS-8-232
1-32 W/T8
48"
ALS-4-132
2-32 W/T8 (tandem)
96"
ALS-8-232
2-32 W/T8
48"
ILS-4-232
4-32 W/T8 (tandem)
96"
ILS-8-432
2 3/4"
4"
6 1/2"
ASYMMETRIC
2 3/4"
4 3/4"
4 1/4"
SYMMETRIC
2 LAMPS
4 1/4"
4"
8 1/8"
HT
EERLESS
E LECTRIC C O. L TD
SPECULAR
see
page
70
LOW PROFILE STRIPS WITH SIDE MOUNTED LAMPS
RAPID START LAMPS
SMS
For surface mounting, shallow profile fluorescent
strips with side mounted lamps.
58
Minimum shielding required to produce a hidden
light source for special lighting effects
Steel channel, baked white enamel finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
LAMPS
SINGLE LAMP
LENGTH
CAT. NO.
1-15 W/T8
18"
SMS-18-115
17 W/T8
24"
SMS-2-117
1-25 W/T8
36"
SMS-3-125
1-32 W/T8
48"
SMS-4-132
2-17 W/T8
24"
SMS-2-217
2-25 W/T8
36"
SMS-3-225
2-32 W/T8
48"
SMS-4-232
2"
4 1/2" max.
DOUBLE LAMPS
2"
6 1/8" max.
EERLESS
E LECTRIC C O. L TD
STAGGERED STRIPS FOR SURFACE MOUNTING
SSL
Fluorescent lighting strips with staggered lamps
for uniform surface illumination.
Eliminates the shadow effect when lamps are
mounted end to end in continuous rows.
59
Available in single or double lamp versions.
Die formed steel channel, baked white enamel finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
LAMPS
SINGLE LAMP STAGGERED
LENGTH
CAT. NO.
1-25 W/T8
36"
SSL-31
1-32 W/T8
48"
SSL-41
2-25 W/T8
72"
SSL-62
2-32 W/T8
96"
SSL-82
4 1/4"
3 5/8"
3'-0"
3'-4"
5'-4"
7'-4"
SSL-31
SSL-41
SSL-62
SSL-82
DOUBLE LAMP STAGGERED
LAMPS
LENGTH
4"
CAT. NO.
2-25 W/T8
36"
SSL-32
2-32 W/T8
48"
SSL-42
4-25 W/T8
72"
SSL-64
4-32 W/T8
96"
SSL-84
4 1/4"
3 5/8"
3'-0"
4'-0"
6'-0"
8'-0"
SSL-32
SSL-42
SSL-64
SSL-84
EERLESS
E LECTRIC C O. L TD
4"
INDUSTRIAL FLUORESCENT LUMINAIRES
IT
2
RAPID START - SLIMLINE - HIGH OUTPUT
For better lighting in industrial applications.
LAMPS
Surface mounting or suspension mounting by means
of pipe or chain. Individual or continuous rows.
Reflectors with die-embossed apertures, reinforcing
ribs. or just plain.
60
Available accessories, hanger clamps, louver, and
wire-guard.
All steel construction. Baked white polyester finish.
Units for rapid start lamps are equipped with electronic
ballast rated for 120 Vac., 60 Hz. Slimline and HO units
are equipped with magnetic ballasts with same rating.
Other ballasts are available on request.
4 1/2"
CATALOG NUMBERS
7 1/2"
13°
13 7/8"
SHIELDING ANGLE = 13°
LAMPS
IT-
PLAIN REFLECTOR
ITA-
REFLECTOR
W / APERTURES
ITR-
RIBBED
REFLECTOR
ITAR-
RIBBED
REFLECTOR W /
APERTURES
2-32 W/T8/RS
IT-4-232
ITA-4-232
ITR-4-232
ITAR-4-232
4-32 W/T8/RS (tandem.)
IT-8-432
ITA-8-432
ITR-8-432
ITAR-8-432
2-38 W/T12/SL
IT-4-238
ITA-4-238
ITR-4-238
ITAR-4-238
2-59 W/T8/SL
IT-8-259
ITA-8-259
ITR-8-259
ITAR-8-259
2-75 W/T12/SL
IT-8-275
ITA-8-275
ITR-8-275
ITAR-8-275
2-60 W/T12/HO
IT-4-260
ITA-4-260
ITR-4-260
ITAR-4-260
2-86 W/T8/HO
IT-8-286
ITA-8-286
ITR-8-286
ITRA-8-286
2-110 W/T12/HO
IT-8-2110
ITA-8-2110
ITR-8-2110
ITAR-8-2110
2-110 W.T12/VHO
IT-4-2110
ITA-4-2110
ITR-4-2110
ITAR-4-2110
2-215 W/T12/VHO
IT-8-2215
ITA-8-2215
ITR-8-2215
ITAR-8-2215
ACCESSORIES:
48" METAL LOUVER SHIELDING 45° x 30°
White enamel finish
R.S. = No. ML-RS-45
S.L. / H.O. = No. ML-HO-45
48" WIRE GUARD
Zinc plated
R.S. = No. WG-RS-1
S.L. / H.O. = No. WG-HO-1
HANGER CLAMP
Closed type
3/8" I.P.S. hanger
HANGER CLAMP
0pen type
3/8" I.P.S. hanger
No. HCC-4
No. HCO-4
EERLESS
SAFETY "V" LINK FOR
CHAIN SUSPENSION
No. VL-1
REFLECTOR ALIGNER CLIP
MR MAX. REVEAL
FINISH see page 71
HT SPECULAR
E LECTRIC C O. L TD
No. AC-1
see
page
70
INDUSTRIAL FLUORESCENT LUMINAIRES
IT
3
RAPID START
For better lighting in industrial applications.
LAMPS
Surface mounting or suspension mounting by means of
pipe or chain. Individual or continuous rows.
Reflectors with die-embossed apertures, reinforcing
ribs. or just plain.
61
Available accessories, hanger clamps, louver, and
wire-guard.
All steel construction. Baked white polyester finish.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Other ballasts are available on request.
4 1/2"
CATALOG NUMBERS
SEE ORDERING GUIDE BELOW
7 1/2"
13 7/8"
SHIELDING ANGLE = 13°
13°
LAMPS
IT-
PLAIN REFLECTOR
ITA-
REFLECTOR
W / APERTURES
ITR-
RIBBED
REFLECTOR
RIBBED
ITAR- REFLECTOR WITH
APERTURES
3-32 W/T8/RS
IT-4-332
ITA-4-332
ITR-4-332
ITAR-4-332
6-32 W/T8/RS (tandem.)
IT-8-632
ITA-8-632
ITR-8-632
ITAR-8-632
ACCESSORIES:
48" METAL LOUVER SHIELDING 45° x 30°
White enamel finish
R.S. = No. ML-RS-45
S.L. / H.O. = No. ML-HO-45
48" WIRE GUARD
Zinc plated
R.S. = No. WG-RS-1
S.L. / H.O. = No. WG-HO-1
HANGER CLAMP
Closed type
3/8" I.P.S. hanger
HANGER CLAMP
0pen type
3/8" I.P.S. hanger
No. HCC-4
No. HCO-4
SAFETY "V" LINK FOR
CHAIN SUSPENSION
No. VL-1
MR MAX. REVEAL
FINISH see page 71
EERLESS
E LECTRIC C O. L TD
REFLECTOR ALIGNER CLIP
No. AC-1
HT SPECULAR
see
page
70
INDUSTRIAL REFLECTOR STRIPS
RAPID START - SLIMLINE - HIGH OUTPUT LAMPS
Surface or pendant mounting on stem or chain.
NIR-NIRA
Individual or continuous row installation.
Sturdy reflectors wirh reinforcing ribs available
without or with apertures for uplight component.
62
Available for Rapid Start - Slimline - High Output
lamps.
Baked white enamel finish.
Units for rapid start lamps are equipped with electronic
ballast rated for 120 Vac., 60 Hz. Slimline and HO units
are equipped with magnetic ballasts with same rating.
Other ballasts are available on request.
CATALOG NUMBERS
RAPID START
& SLIMLINE LAMPS
LAMPS
4 1/4"
"L"
NIR
NIRA
LESS APERTURES
WITH APERTURES
1-32 W/T8/RS
4'
NIR-4-132
NIRA-4-132
2-32 W/T8/RS†
8'
NIR-8-232
NIRA-8-232
1-59 W/T8/SL
8'
NIR-8-159
NIRA-8-159
2-59 W/T8/SL†
16'
NIR-16-259
NIRA-16-259
1-75 W/T12/SL
8'
NIR-8-175
NIRA-8-175
2-75 W/T12/SL†
16'
NIR-16-275
NIRA-16-275
2-32 W/T8/RS
4'
NIR-4-232
NIRA-4-232
4-32 W/T8/RS†
8'
NIR-8-432
NIRA-8-432
2-59 W/T8/SL
8'
NIR-8-259
NIRA-8-259
2-75W/T12/SL
8'
NIR-8-275
NIRA-8-275
1-60 W/T12/HO
4'
NIR-4-160
NIRA-4-160
2-60 W/T12/HO†
8'
NIR-8-260
NIRA-8-260
1-86 W/T8/HO
8'
NIR-8-186
NIRA-8-186
2-86 W/T8/HO†
16'
NIR-16-286
NIRA-16-286
1-110 W/T12/HO
8'
NIR-8-1110-
NIRA-8-1110
2-110 W/T12/HO†
16'
NIR-16-2110
NIRA-12110
2-60 W/T12/HO
4'
NIR-4-260
NIRA-4-260
2-86 W/T8/HO
8'
NIR-8-286
NIRA-8-286
2-110 W/T12/HO
8'
NIR-8-2110
NIRA-8-2110
5 5/8"
10 3/8"
4 1/4"
5 5/8"
10 3/8"
HIGH OUTPUT LAMPS
4 1/4"
6 3/8"
10 3/8"
4 1/4"
6 3/8"
10 3/8"
† TANDEM
MR MAX. REVEAL
FINISH see page 71
HT
SPECULAR
see
page
70
EERLESS
Wire guards are available for all above units.
To specify add WG at end of cat. no.
Ex: NIRA-4-232-WG
E LECTRIC C O. L TD
WEATHERPROOF COMMERCIAL LUMINAIRES
RAPID START - SLIMLINE - HIGH OUTPUT
IWPS
Weatherproof fluorescent luminaires for surface mounting.
Galvanized steel body with reflector coated with a durable
white polyester baked finish.
Available with or without a clear acrylic lamp sleeve for
protection against cold air currents over lamp surface.
Neoprene closed cell gasket on channel cover.
Weatherproof lamp-holders.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Slimline and HO units are equipped with
magnetic ballasts with same rating. Other ballasts are
available on request.
IWPS -
WEATHERPROOF
SOCKETS
LAMPS
LENGTH
CAT. NO.
1-32 W/T8/RS
4'
IWPS-4-132
1-59 W/T8/SL
8'
IWPS-8-159
1-75 W/T12/SL
8'
IWPS-8-175
1-44 W/T8/HO
4'
IWPS-4-144
1-86 W/T8/HO
8'
IWPS-8-186
2-32 W/T8/RS
4'
IWPS-4-232
2-59 W/T8/SL
8'
IWPS-8-259
2-75 W/T12/SL
8'
IWPS-8-275
2-44 W/T8/HO
4'
IWPS-4-244
2-86 W/T8/HO
8'
IWPS-8-286
1-32 W/T8/RS
4'
IWPSP-4-132
1-59 W/T8/SL
8'
IWPSP-8-159
1-44 W/T8/HO
4'
IWPSP-4-144
1-86 W/T8/HO
8'
IWPSP-8-186
2-32 W/T8/RS
4'
IWPSP-4-232
2-59 W/T8/SL
8'
IWPSP-8-259
2-44 W/T8/HO
4'
IWPSP-4-244
2-86 W/T8/HO
8'
IWPSP-8-286
4"
6 7/8"
9 3/8"
5 3/4"
6 3/8"
11 3/8"
IWPSP - WEATHERPROOF SOCKETS WITH LAMP SLEEVE
4"
6 7/8"
9 3/8"
5 3/4"
6 3/8"
11 3/8"
WEATHERPROOF
SOCKET
WEATHERPROOF SOCKET
with LAMP SLEEVE
EERLESS
ELECTRIC C O. L TD
63
WEATHERPROOF FLUORESCENT LIGHT STRIPS
WPS
RAPID START - SLIMLINE - HIGH OUTPUT
Weatherproof light strips for surface mounting.
Galvanized rugged steel body coated with a durable
white polyester finish.
64
Neoprene closed cell gasket around cover.
Weatherproof sockets seal out moisture from lamp
contacts.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Slimline and HO units are equipped with
magnetic ballasts with same rating. Other ballasts are
available on request.
LAMPS
ONE LAMP
LENGTH
CAT. NO.
1-32 W/T8/RS
4'
WPS-4-132
1-40 W/T12/RS
4'
WPS-4-140
2-32 W/T8/RS (Tandem)
8'
WPS-8-232
2-40 W/T12/RS (Tandem)
8'
WPS-8-240
1-75 W/T12/SL
8'
WPS-8-175
2-75 W/T12/SL (Tandem)
16'
WPS-16-275
1-60 W/T12/HO
4'
WPS-4-160
1-110 W/T12/HO
8'
WPS-81110
2-110 W/T12/HO (Tandem)
16'
WPS-16-2110
2-32 W/T8/RS
4'
WPS-4-232
2-40 W/T12/RS
4'
WPS-4-240
2-75 W/T12/SL
8'
WPS-8-275
2-60 W/T12/HO
4'
WPS-4-260
2-110 W/T12/HO
8'
WPS-8-2110
4"
5 3/4" ref.
TWO LAMPS
5 3/4"
5 3/8" ref.
WEATHERPROOF
SOCKET
EERLESS
ELECTRIC C O. L TD
WEATHERPROOF FLUORESCENT LIGHT STRIPS
RAPID START - SLIMLINE - HIGH OUTPUT
Weatherproof light strips with clear acrylic lamp
sleeve for surface mounting.
WPSP
Galvanized rugged steel body coated with a durable
white polyester finish.
Neoprene closed cell gasket around cover.
Weatherproof sockets seal around lamp sleeve from
moisture and helps to maintain lamp operating
temperature.
Units are equipped with electronic ballasts rated for
120 Vac., 60 Hz. Slimline and HO units are equipped with
magnetic ballasts with same rating. Other ballasts are
available on request.
LAMPS
ONE LAMP
4"
LENGTH
CAT. NO.
1-32 W/T8/RS
4'
WPSP-4-132
2-32 W/T8/RS†
8'
WPSP-8-232
1-59 W/T8/SL
8'
WPSP-8-159
2-59 W/T8/SL†
16'
WPSP-16-259
1-44 W/T8/HO
4'
WPSP-4-144
1-86 W/T8/HO
8'
WPSP-8-186
2-86 W/T8/HO†
16'
WPSP-16-286
2-32 W/T8/RS
4'
WPSP-4-232
2-59 W/T8/SL
8'
WPSP-8-259
2-44 W/T8/HO
4'
WPSP-4-244
2-86 W/T8/HO
8'
WPSP-8-286
6 1/8" ref.
† TANDEM
TWO LAMPS
5 3/4"
5 3/4" ref.
WEATHERPROOF SOCKET
with LAMP SLEEVE
EERLESS
E LECTRIC C O. L TD
65
CONVERSION RETROFIT KITS
66
Conversion kits are used to convert originally installed luminaires
to units with updated electrical components and light control surfaces.
Economically benificial, a conversion kit with properly matched
high efficient ballasts and lamps will save energy consumption compared to older magnteic ballasted rapid-start installations.
High efficiency electronic ballasts offer enhanced lighting performance and energy saving.
The conversion kits are easy to install and provide a simple and
economical solution to upgrade present installations. They are available for recessed as well as surface mounted luminaires.
The reflectors are made of specular aluminum or of steel coated
with the MAXIMUM REVEAL™ paint finish, that features high reflectivity (97%) and optimizes the new generation of fluorescent lamps.
MR MAX. REVEAL
FINISH see page 71
The variations of retrofit kits are many. Our product department will assist you to design a kit custom made to meet your requirements.
The basic conversion kits usually include:
*
*
*
*
Lampholders with mounting brackets
Ballasts
Necessary reflectors
Mounting hardware
For inquiries, please consult our sales offices listed on back cover.
EERLESS
E LECTRIC C O. L TD
Custom Lighting Products
WE DO CUSTOM LIGHTING FOR PROJECTS AS PER YOUR SPECIFICATION.
IMPERIAL & METRIC
FOR DETAILS OR PROJECT REQUESTS CONSULT FACTORY.
Following are examples of some custom-made luminaires:
SURFACE MOUNTED 48" LUMINAIRE WITH 3" DEEP ALUMINUM
PARABOLIC LOUVER.
ONE OR TWO LAMPS.
RECESSED 1' x 1' LUMINAIRE WITH 3" DEEP ALUMINUM
PARABOLIC LOUVER (LENS AN OPTION).
FOR 2D OR PL TYPE LAMPS.
6 3/4"
6 3/4"
9"
12"
SURFACE MOUNTED - WALL WASHER.
ASYMMETRIC LIGHT DISTRIBUTION.
HIGH EFFICIENCY LUMINAIRE.
SPECULAR REFLECTORS.
2 3/4"
5 1/2"
5 7/8"
10 1/2"
8"
CORNER MOUNTED LUMINAIRE.
TAMPER RESISTANT SCREWS.
POLYCARBONATE LENS.
CLEAN ROOM LUMINAIRES.
GASKETS INSTALLED AROUND PERIMETER,
BETWEEN: LENS AND FRAME,
FRAME AND HOUSING,
HOUSING AND CEILING.
7"
7"
7 1/2"
RECESSED COFFER.
WRAP-AROUND CLEAR PRISMATIC DIFFUSER..
METAL ENDS.
TILE SIDES (BY OTHERS).
PENDANT OR RECESSED
HIGH INTENSITY LIGHTING.
USING TT5 FLUORESCENT
LAMPS.
SHIELDINGS TO CHOICE.
8 1/8"
NOMINAL 24" SQUARE
CEILING GRID
AS SPECIFIED
EERLESS
E LECTRIC C O. L TD
67
Optional lenses and louvers available with luminaires listed in this catalogue:
SHIELDING No.
Clear acrylic lens. Basic industry standard. Female conical
prisms. 32°. Economy - Performance.
Available thickness:.095" -.100" -.110" -.115" -.125".
Nominal thickness from supplier.
68
12
15
Clear acrylic lens. Female conical prisms 30°.
19
Clear acrylic lens. Male conical prisms. 3/16" sq. base.
Clear acrylic lenses with female conical circular base prisms of
3/8" dia. Running parallel and perpendicular to the length and
width of the panel. Available:.100" and .125".
23
Clear acrylic lens with a prismatic pattern of male cones running
parallel and perpendicular to the length and width of the lens.
Provides good lamp cut-off. Available panels are .130" to .140" thick.
KSH-32-CFL
Acrylic lens injection moulded. Conical shaped male prisms on
square base.
Holophane: 6144
6244
Clear acrylic lens. Conical shaped male prisms with hexagonal
base. Obscures lamp image.
Holophane: 6150
Clear acrylic injection moulded lens. Light controlled by
hexagonal hemispherical refractive elements low brightness.
VCP 70. Obscures lamp image.
Holophane: 8224
Injection moulded clear acrylic lens .240" with optical interface .040"
sonicly welded acrylic to the upper surface of the Refractive grid.
Holophane: 8246
White acrylic louver. 45° cut-off.
Plastigrid Louver
Open Cell.1/2" sq. grids.
Excellent brightness control.
45° shielding angle.
Visual comfort rated at 100.
P1
Parabolic Louver
7/16"
9/16"
Parabolic cube acrylic
louvers. Specular silver or
gold finish available as
standard.
Superb brightness control.
40° shielding angle.
Visual comfort rated at 99.
Superb brightness control.
40° shielding angle.
Visual comfort rated at 93.
P4
Parabolic Louver
9/16"
13/16"
P2
Parabolic Louver
1"
1-½"
Good brightness control.
30° shielding angle.
Visual comfort rated at 85.
P3
Parabolic Louver
1-½"
3"
EERLESS
E LECTRIC C O. L TD
AVAILABLE OPTIONS:
(consult factory)
METRIC and CUSTOM MADE LUMINAIRES (available on request)
PREWIRED
Cord set 3 M Long 3-#14 wire, ST insulation, 105°C with moulded “U” ground cap in 120V or 347V configuration CSA certified.
Quick-connect plugs pre-wired CSA certified.
BALLAST
Energy saving ballasts.
R.S ballast for cold weather starting.
Dimming ballast.
Electronic ballasts.
FUSING
H.R.C. Fuse and fuse holders.
LAMP
Lamps installed during fixture assembly (not on all products - consult factory).
R.F.I. SUPPRESSOR
Inductive capacitor filter minimizes interference from line radiation or feedback.
Capacitor filter only.
R.F.I. SHIELDING
Radio frequency interference shielding filters and grounds out radiated interference from fluorescent lamps.
VANDAL RESISTANT (available on certain models only)
Tamper resistant hardware to secure steel framed lens.
Vandal resistant polycarbonate lens.
High impact resistant “Acri-Tuf” Lens.
NIGHT LIGHT (available on certain models only)
EMERGENCY LIGHTING
Sealed power pack. Illuminates (1) lamp at 50% output for 30 Minutes or more if desired.
Rechargeable during normal AC operation.
OTHERS
Air Craft cable suspension - "V" Link adapter for strip suspension - Flexible whip - Modular wiring systems.
HANGERS
HR-HANGER
3/8" I.P.S. RIGID Hanger
LENGTH
3/8" I.P.S. BALL Hanger
HR-6
6"
HS-6
HR-12
12"
HS-12
HR-18
18"
HS-18
HR-24
24"
HS-24
HR-30
30"
HS-30
HR-36
36"
HS-36
HR-42
42"
HS-42
HR-48
48"
HS-48
EERLESS
ELECTRIC C O. L TD
HS-HANGER 10° MAXIMUM
69
LACH
SL
HYDRO-TECH
70
SPECULAR FINISH
We offer the widest range of ENERGY SAVING specular silver interior products and have
developed the HYDRO-TECH series of fluorescent luminaires that are second to none in performance
and quality.
A super reflective interior surface is used for these luminaires.
High efficiency is obtained by employing a prefinished material consisting of a silver-metalized
film on a metal substrate, resulting in a 96% total hemispherical reflectance, producing up to 99% of
the lamps colour rendition. A superior material designed for the lighting industry resulting in high
performance and enhanced quality of light.
SPECULAR
Products identified with the HT
designation in this catalogue can be provided
FINISH
with the HYDRO-TECH specular silver interior, specular reflectors, or a combination of both depending on the model. Please consult factory for your requirements.
Photometric data is available on request.
A selection of electronic ballasts combined with the latest lamp technology supplements the
total energy efficient lighting package.
Other savings include minimum maintenance. The smooth surface has less tendency to collect
dirt and dust. A 2% loss in efficiency is expected over a five year span.
The HYDRO-TECH energy efficient products are excellent choices for new installations and for
refurbishing old installations with retro-fit kits, see page 66 for details.
AOP
NIR
EERLESS
E LECTRIC C O. L TD
Other Special Finishes
Other than the Hydro Tech specular finish, special high performance white paint finishes to enhance the
luminaire operation have been developed and are available, these include:
The “MAXIMUM REVEAL” Finish,
The “MAXIMUM REVEAL” finish, is a specially formulated high quality powder coating optimized to
increase reflectivity and to improve luminaire performance.
MAX. REVEAL
Products identified with the MR FINISH
designation in this catalogue, for a small premium,
can be applied to painted luminaires when higher performance is desired. It is specified by adding the
designation “MR” after the catalogue number of the luminaire.
The “MAXIMUM REVEAL” special formulation, is applied in a thickness of 2.5 mils on the raw steel parts
following a multi-stage chemical cleaning process and can produce paint reflectivity values in the order of 97%
at specific wave lengths.
The performance of the “MAXIMUM REVEAL” treatment is especially appreciable when the Nanometric
values on the electromagnetic spectrum scale are between 440 nm and 550 nm. It is most effective with the
new generation of tri-phosphor fluorescent bulbs that have colour temperatures between 3500 and 41000
degrees Kelvin, and have a colour-rendering index of 85%.
Other features of the “MAXIMUM REVEAL” finish
Meets extreme ultraviolet conditions as per: ASTMD4587
Meets increased hardness drying as per: ASTMD-3363
Meets high humidity, condition requirements as per. ASTM D-227
Meets salt spray resistance requirements as per: ASTM B-1 17
The “MAXIMUM REVEAL” finish carries a 20 year limited warranty against more than a 5% depreciation
of reflectivity under normal operating conditions with cleaning being done using a soft non static creating linen
cloth and cleaning products that do not contain chemical detergents.
The “NINETY FOUR” Finish- “94”
The “NINETY FOUR” finish is another special formulation of a powder paint finish that improves the
general luminaire performance and is specified by adding the numbers “94” after the catalogue number of the
luminaire. Please consult the factory for more details.
EERLESS
E LECTRIC C O. L TD
71
ALPHABETICAL INDEX
72
Series
Page
Series
Page
Series
Page
Series
Page
Series
Page
2 & 3PL
1x4
21
CLOUDLINE
41
IT3
61
NDLC
26
SCT
53
2 & 3PL
2x2
22
CN
42
IWPS
63
NIR
62
SDL
10
2 & 3PL
2x4
23
CR
43
IWPSP
63
NIRA
62
SHIELDINGS
68
3TPLS
24
CUSTOM
67
KL3
4,5,6,7.
NSL
56
SL
30
4PL
1x4
18
CVA
44
KM3
4,5,6,7.
OPL
1x4
13
SMS
58
4PL
2x2
19
DC
51
KOPA
38
OPL
2x2
14
SOP
31
4PL
2x4
20
DHIF
46
KOPA-D
39
OPL
2x4
15
SSL
59
AD
8
DP
51
LACH
28
OPL
20"x48"
16
UCL
43
AOP
31
FC
50
LACH-3
29
OPL
20"x60"
16
VR
53
AOP-7
25
FP
50
LS
54
OPTIONS
69
VT
48
ALS
57
GP
45
LSG
54
PEL
37
VTU
49
CBA
46
HBL
47
LSS
55
PF
36
WM
44
CBL & CDH
47
ILS
57
LSSG
55
PFK
36
WP
52
CI
42
IPR
9
LSHO
55
PMA
40
WPS
64
26
IPS
9
LSHOG
55
PW2000
11
WPSP
65
32
IT2
60
LX
35
RSL
34
WWH
11
CL
PARABOLIC
CL
LENS
EERLESS
E LECTRIC C O. L TD
GENERAL INFORMATION
n
Luminaires and electrical components are listed and certified by C.S.A.
and/or UL as required.
n
Luminaires are available for metric ceiling modules and for T-12 metric
lamps. Consult factory for details.
n
Standard luminaires are supplied for 115-120 Vac, 60 Hz operation.
Other voltages are available on request only.
n
The factory has the option to supply an operating ballast of its own choice
if not specified otherwise. Electronic ballasts specified in this catalogue
are of the instant-start type. Specific ballast are available on request.
n
For magnetic, Energy Saving, and other types of ballast consult factory.
n
Cancellation of orders in process covering regularly listed catalog items
will be subject to a minimum cancellation charge of 50%. Cancellation of
orders for special luminaires will not be accepted.
n
Inquiries are invited for custom made luminaires. Contact one of our
sales offices.
n
All our products are finished in baked enamel or polyester powder
coating.
n
We reserve the right to make technical improvements and to update our
product line illustrated in this catalog without notice.
n
All descriptive specifications, drawings and dimensions published in this
catalog are nominal and are for illustrative purposes only. For
verification of same consult factory.
n
For further information about our product line please contact your local
representative or call one of our sales offices listed on the back cover.
EERLESS
E LECTRIC C O. L TD
73
PEERLESS ELECTRIC CO. LTD.
www.peerless-electric.com
HEAD OFFICE
FACTORY AND SALES
MONTREAL, Qc
9145 Boivin St., Lasalle H8R 2E5
Tel.: (514) 595-1671
Fax: (514) 595-4411
TORONTO, On
FACTORY AND SALES
161 Bartley Drive, M4A 1E6
Tel.: (416) 751-5644
Fax: (416) 751-5622
CALGARY, Ab
FACTORY AND SALES
4120 23rd Street, N.E. T2E 6W9
Tel.: (403) 291-6788
Fax: (403) 291-6779
SALES OFFICES
ST. JOHNS, NFLD
HALIFAX, N.S.
FREDERICTON, N.B.
QUEBEC, Qc
OTTAWA, On
NORTHERN ONTARIO
WINNIPEG, Mb
SASKATOON, Sk
EDMONTON, Ab
CALGARY, Ab
VANCOUVER, B.C.
Printed in Canada
PUCE-M1-2002