TRANSMITTAL
5995 Greenwood Plaza Blvd.
Suite 100
Greenwood Village, CO 80111-4710
303-571-5377
303-629-7467 (fax)
PROJECT:
TO:
ATTN:
No. 13D1313-0049
DATE: 03-13-2013
UCD-CU Foundation Renovation
Carlton Electric Inc
1284 S Cherokee St
Denver CO 80223
RE:
260000-Electrical
Jim Montelongo
JOB:
Ph/Fax:
WE ARE SENDING:
SUBMITTED FOR:
13D1313
ACTION TAKEN:
Shop Drawings
Approval
Approved as Submitted
Letter
Your Use
Approved as Noted
Prints
As Requested
Returned After Loan
Change Order
Review and Comment
Resubmit
Submit
Plans
SENT VIA:
Samples
Returned
Specifications / Product Data
Attached
Returned for Corrections
Other: Lighting Package Submittal
Separate Cover Via:
Due Date:
NOTES:
Item
Package
Code
Submittal
Submittal
260000
260000
260000.01
260000.02
Rev. Copies Date
1
1
1
1
03-13-2013
03-13-2013
Description
Status
Lighting
Lighting Control System
Architect Review
Architect Review
CC:
Signed:
Daniel Sullivan
1301 Wazee Street Suite 100, Denver CO 80204
Submittal Response
Transmittal ID:
Date Sent:
00073
3/13/2013
Review and approval are only for conformance with the information given and the design
concept of the Project as expressed in the Contract Documents. Review and approval of
submittals are not conducted for the purpose of determining the accuracy and
completeness of other details, such as dimensions and quantities, or for substantiating
instructions for the installation or performance of equipment or systems, all of which
remain the responsibility of the Contractor as required by the Contract Documents. The
Architect's review and approval of the Contractor's submittals shall not relieve the
Contractor from any obligation contained in the Contract Documents. The Architect's
review and approval shall not constitute approval of any construction means, methods,
techniques, sequences, or any safety precautions or procedures. The Architect's approval
of a specific item shall not indicate approval of an assembly of which the item is a
component.
Project:
To:
1244.00 Bldg 500 CU Foundation Renovation
Dan Sullivan
GHPhipps Construction Companies
5995 Greenwood Plaza
Suite 100
Greenwood Village, CO 80111­4710
United States
303­571­5388, ext.1233 (Phone)
303­629­7467 (Fax)
JD Steward
GHPhipps Construction Companies
United States
303­944­7310 (Phone)
CC:
Dan Shomers (UCD)
From:
Robert Lane
Bennett Wagner & Grody Architects
1301 Wazee Street
Suite 100
Denver, CO 80204
303­623­7323 x153 (Phone)
(303) 623­2836 (Fax)
Sent Via:
Info Exchange
Submittal ID:
Subject:
26 00 00 ­ 001
Lighting Submittal
Action:
Remarks:
Approved as Noted
Contents
Quantity:
1
Description:
13D1313­0006.pdf
Action:
Response:
Dated:
2/25/2013
Number:
Quantity:
1
Description:
Subm Stamp UCD.pdf
Action:
Response:
Dated:
2/25/2013
Number:
Quantity:
1
Description:
Dated:
2/25/2013
Number:
Combined.pdf
Action:
Response:
The RMH Group, Inc. Submittal Transmittal
Submittal ID:
07­Revised
Transmittal ID: 00021
Date Sent:
3/13/2013
Project:
Number:
18737 ­ UCD Bldg. 500 CU Foundation
18737
To:
Robert Lane
Bennett Wagner Grody
United States
From:
Diane Hamilton
The RMH Group, Inc.
Subject:
Via:
Spec Section:
Purpose:
Remarks:
CC:
Lighting ­ Revised
Info Exchange
Make Corrections Noted
Randy Knoll(The RMH Group, Inc.)
Rick Phillips(The RMH Group, Inc.)
Contents
Quantity:
1
Dated:
3/13/2013
Description:
SR07 ­ Lighting ­ Revised Response Combined.pdf
Action:
Remarks:
Number:
12600 West Colfax Avenue, Suite A-400 | Lakewood, Colorado 80215
P 303.239.0909 | F 303.235.0218 | rmhgroup.com
Submittal Review
Project Name:
UCD BLDG. 500 CU FOUNDATION
Submittal Reference:
S07 – Lighting – Revised Response
Reviewed By:
Randy Knoll
Project No.:
Date:
18737
03-13-2013
Checking is only for general conformance with the design concept of the project and general compliance with
the information given in the Contract Documents. The response action shown is subject to the requirements
of the Contract Documents. Contractor is responsible for dimensions and quantities, fabrication processes
and techniques of construction, coordination of the contractor's work with that of all the other trades, and the
satisfactory performance of the contractor’s work. Comments apply only to the submittals referenced herein.
Item
Description
Action
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Luminaire Type A1
Luminaire Type A1D
Luminaire Type A2
Luminaire Type B1
Luminaire Type B2
Luminaire Type C1
Luminaire Type C2
Luminaire Type D1
Luminaire Type D1D
Luminaire Type D2
Luminaire Type D2D
Luminaire Type P1
NET
NET
NET
NET
NET
NET
NET
NET
NET
NET
NET
MCN
13.
Luminaire Type P2
MCN
14.
Luminaire Type P3
MCN
15.
16.
17.
Luminaire Type P4
Luminaire Type W1
Luminaire Type X1
NET
NET
NET
Comments
Provide LED 10w MR16 Lamps as indicated on Luminaire
Schedule.
Modify stem length so the mounting height is 7’- 5-1/2”
AFF (18-1/2” overall fixture ht.)
Modify stem length so the mounting height is 7’- 0” AFF
(24” overall fixture ht.)
No modification to stem length is required, install as is.
END OF REVIEW
Action Key:
N E T – No Exception Taken
R & R – Revise & Resubmit
M C N – Make Corrections Noted
R E J - Rejected
w:\jobs18\18737\construction admin\submittals\sr07 - revised response - lighting.docx
S S I – Submit Specified Item
engineering a greener future
SM
CU FOUNDATION
RENOVATION
FEBRUARY 20, 2013
TRANSMITTAL
QED - DENVER
TO
ATTN
FEBRUARY 20, 2013
DATE
DON MASON
RE
JENNIFER KIRKMAN
WE ARE SENDING YOU:
Attached
Change of Order
Copy of Letter
Prints
Samples
Shop Drawings
X
Cutsheets
Plans
Specifications
Under Separate Cover
COPIES
1 PDF
DATE
2.20.13
DESCRIPTION
Submittals Included:
THESE ARE TRANSMITTED: (AS CHECKED BELOW)
X
For Approval
Approved as submitted
Resubmit _______ copies for approval
For your use
Approved as noted
Submit _________ copies for distribution
Record Only
Return _________ corrected prints
For review and comment
Other_________________________________________________________________
FOR BIDS DUE ________________20 _________
REMARKS:
IF SUBMITTALS ARE “FOR APPROVAL” AND MATERIAL IS RELEASED WITHOUT THE RETURN OF
ONE COMPLETE SET OF APPROVED DRAWINGS, THIS WILL BE DEEMED YOUR WAIVER OF APPROVAL.
***CONTRACTOR TO VERIFY:***
VOLTAGE:
ROW INFORMATION:
COLORS/FINISHES:
SWITCHING OPTIONS:
CEILING TYPE:
SUSPENSION LENGTHS:
SPECIFIC DIMMING BALLASTS (if required)
OTHER:
FILE
COPY TO __________________________________________
JENNIFER KIRKMAN
BY: ____________________________
IF ENCLOSURES ARE NOT AS NOTED, PLEASE NOTIFY US AT ONCE
Submitting Agency:
Description:
P12C1C CL 9 M MC
Project:
Notes:
CU FOUNDATION RENOVATION
Type:
P1
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
(
i
f
r
e
q
u
i
r
e
d
)
:
Submitting Agency:
Type:
Description:
TLW120MII300
Project:
Notes:
CU FOUNDATION RENOVATION
Remote Mount Transformer (Field Install)
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
(
i
f
r
e
q
u
i
r
e
d
)
:
P1
Illumination Systems, Inc
200 Kalamath Street
Denver CO 80223
Phone: (303) 295-2900
Fax: (303) 293-8337
Date: Feb 20, 2013
Job Name
CU Foundation
Denver CO
Bid Date
Feb 4, 2013
Submittal Date
Feb 20, 2013
Architect:
Bennett, Wagner, & Grody
1301 Wazee St. #100
Denver CO 80204
Engineer:
RMH Group
12600 W. Colfax Ave
Lakewood CO 80215
Date: Feb 20, 2013
Page 1/1
Transmittal
Illumination Systems, Inc
200 Kalamath Street
Denver CO 80223
Phone: (303) 295-2900
From: Stephanie Waters
Project
CU Foundation
Location Denver CO
Contact:
ATTACHED WE ARE SENDING YOU 0 COPIES OF THE FOLLOWING ITEMS:
Drawings
Specifications
Other:
Prints
Information
Plans
Submittals
THESE ARE TRANSMITTED FOR:
Prior Approval
Approval
Approval as Submitted
Approval as Noted
Qty
Type
7
3
1
1
2
FF00009
C1
C2
P2
P3
P4
MFG
Neo-Ray
Item Note:
Neo-Ray
Item Note:
Manning
Manning
Manning
Resubmittal for Approval
Corrections
Your Use
Review and Comment
Record
Bids due on:
Other:
Part
23DR-1T5-ETG-6-U-EB-SI-S93
FACTORY DRAWINGS TO FOLLOW
23DR-1T5-ETG-7-U-EB-SI-S93
FACTORY DRAWINGS TO FOLLOW
DP-880-PT(LSV)-4F39-277-WH-SIN-DM
DP-882-PT(LSV)-4F40-277-WH-SIN-DM
DP-884-PT(LSV)-6F40-277-WH-SIN-DM
www.illumsys.com
Page 1/1
Feb 20, 2013
RE:
Qty
CU Foundation
Denver CO
Type
7
3
1
1
2
FF00010
C1
C2
P2
P3
P4
MFG
Neo-Ray
Item Note:
Neo-Ray
Item Note:
Manning
Manning
Manning
Part
23DR-1T5-ETG-6-U-EB-SI-S93
FACTORY DRAWINGS TO FOLLOW
23DR-1T5-ETG-7-U-EB-SI-S93
FACTORY DRAWINGS TO FOLLOW
DP-880-PT(LSV)-4F39-277-WH-SIN-DM
DP-882-PT(LSV)-4F40-277-WH-SIN-DM
DP-884-PT(LSV)-6F40-277-WH-SIN-DM
www.illumsys.com
Page 1/1
Catalog Number:
23DR-1T5-ETG-6-U-EB-SI-S93
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
Type:
C1
Notes: FACTORY DRAWINGS TO FOLLOW
ISI13-6025
"‡,9
DESCRIPTION
A return to simplicity, elegance and minimalism ... Slender lines of light set
in an architectural environment are the essence of Straight and Narrow. This
series accommodates most architectural lighting design applications.
Generation II enhancements and new features:
- Extruded housing offers precise in-line appearance and enhanced rigidity
- Staggered lamping minimizes socket shadow
- Flush and regressed lay in lens provides clean look and easy maintenance
- Unique snap in louver design for easy installation and better retention
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
Construction
Extruded aluminum housing.
Nominal 3', 4', 6' or 8' fixtures.
Shielding
Trimless lay-in white, high
transmission or regressed acrylic
diffuser. Snap-in, high
performance, parabolic louver with
or without ovelay.
Electrical
120, 277, 347 or Universal Voltage
electronic ballast. Fixtures and
electrical components certified to
UL and CUL standards.
Damp Location listing available.
Downlight
20W or 35W MR16 fixed or
adjustable available
Finish
Durable, low gloss, white, powder
coated acrylic. Optional custom
finish.
Mounting
Recessed:
(ETG) 15/16" Exposed T-grid
(STG) 9/16" Screw Slot Grid
(SR) Sheet Rock (Flanged)
(FSR) Sheet Rock (Flangeless)
(FTG) 9/16" Exposed T-grid
23DR
Straight &
Narrow
Gen II
SUPPORT WIRE
(BY OTHERS)
Individual
1 & 2 T5
1 & 2 T5HO
1 & 2 T8
Recessed
Direct
5 1⁄16”
5 1⁄16”
Light Distribution:
Indirect = 0%
Direct = 100%
CEILING PANEL
(BY OTHERS)
3 15⁄16”
S23DR/1T8 or 2T8 ETG WITH LENS
(ALSO AVAILABLE WITH LOUVER)
3 15⁄16”
S23DR/1T5 or 2T5 ETG WITH LOUVER
(ALSO AVAILABLE WITH LENS)
ORDERING INFORMATION
SAMPLE NUMBER: 23DR-1T5-ETG-4-UEB-SI-S23R
23
Series
23 = Straight &
Narrow
D
Light
Output
D =Direct
Mounting
R =Recessed
RDL =Recessed
with Downlight
Lamp Type
T5
T5HO
T8
Number of Lamps
(not included)
1 =1 Lamp
2 =2 Lamps
Length
3 =3 ft
4 =4 ft
6 =6 ft
8 =8 ft
2
Ballast
Voltage
EB =Electronic
1 =120V
Ballast
2 =277V
DB =Dimming
3 =347V
Ballast
U =Universal
Switching
Options
SI =Single
Switching
DU =Dual
Switching
Electronic Dimming Balast Options
1 = Lutron 3 wire line voltage 1% dimming
1 Required voltage information.
Ceiling Type
2 = Lutron 3 wire line voltage 10% dimming
t 4UBOEBSE&.1BDLJTGPSMBNQ
ETG =15/16” exposed T-grid
t For some electronic, dimming and EM battery pack ballast
3 = Lutron Eco System Bus 1% dimming
STG = Slot T-grid
combinations, fixture has space limitation (consult factory).
4 = Lutron Eco System Bus 10% dimming
t 'PSEJNNJOHTQFDJGZCBMMBTUPQUJPO
SR =Sheet Rock (Flanged)
5 = 0-10 Volt dimming
t Due to various constraints, some options may not be
FSR =Sheet Rock ( Trimless)
6 = Hot & Neutral line voltage dimming
combined with others.
P lease consult your COOPER
FTG =9/16” exposed T-grid
7 = 2 step dimming
Lighting representative for additional information.
2 Individual fixtures cannot be combined into runs
t "DSZMJDMFOTFTXJMMCFTMJHIUMZTIPSUFSUIBOIPVTJOHMFOHUIBUBNCJFOUUFNQFSBUVSFJOPSEFSUPDPNQFOTBUFGPSOPSNBMUIFSNBMFYQBOTJPOEVSJOHPQFSBUJPO
3 Regress lens not available with T5HO lamping
Emergency 1
EM = Emergency
Pack
EC = Emergency
Circuit
Shielding Options
S90 =High performance louver
S90P =High performance
louver with acrylic overlay
S90W =White painted louver
S90WP =White painted louver
with acrylic overlay
S93 =Satin white lens
S93HT =High transmission lens
3
S23R=Satin white regress lens
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Fusing
GLR
GMF
Downlight Options
(2) MR16 F =
Up to 35W (fixed)
(2) MR16A =
Up to 35W (adjustable)
Optional Accessory
(Downlight only)
F1 =Hex Cell Louver
F2 =Prismatic Spread Lens
F3 =Linear Spread Lens
F4 =Milk White Lens
ADN100250
05/28/2010 10:28:39 AM
Catalog Number:
23DR-1T5-ETG-6-U-EB-SI-S93
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
PHOTOMETRICS
Û
Û
300
Û
ISI13-6025
Candela
Zone
Lumens
%Lamp
%Fixt
0-30
0-40
0-60
0-90
0-180
640.19
1018.79
1702.2
2105.97
2105.97
22.10
35.10
58.70
72.60
72.60
30.40
48.40
80.80
100.00
100.00
Angle
0
5
10
15
25
35
45
55
65
75
85
90
Total Luminaire Efficiency = 72.60%
600
Û
900
0˚
LEGEND:
0-deg:
45-deg:
90-deg:
15˚
30˚
C1
Notes: FACTORY DRAWINGS TO FOLLOW
Zonal Lumen Summary
23DR
S23DR-1T5-S93HT
Type:
(1) T5 Lamp
S92HT - High Transmission Lens
White Painted Upper Reflector
White Painted Optic Chamber
Efficiency: 72.60%
Report#: P30310
Straight & Narrow - Gen II 23DR
0
1243
1235
1210
1171
1054
895
713
526
347
186
56
0
45
1243
1232
1203
1156
1023
854
672
491
324
176
51
0
90
1243
1221
1187
1136
990
812
630
458
303
166
49
0
MOUNTING INFORMATION
ETG (15/16" Exposed T-Grid)
Mounting Details
47⁄8” Grid center to center
2163 "
3163 "
FTG ( 9/16" Fine T-Grid)
Mounting Details
45⁄8” Grid center to center
STG ( 9/16" Slot T-Grid)
Mounting Details
SR (Sheetrock)
Mounting Details
FSR (Flangeless Sheetrock)
Mounting Details
45⁄8” Grid center to center
4¼” Rough in wide opening
4¼” Rough in wide opening
43"(1T5, 1T8, 2T5)
44"(2T8)
67"(1T5, 1T8, 2T5)
71"(2T8)
2163 "
3163 "
WIREFEED
WIREFEED
6FT IND
4FT IND
1"
1"
MOUNT
47-3/8"(1T5, 1T8, 2T5)
48-3/8"(2T8)
2163 "
3163 "
MOUNT
31"(1T5, 1T8, 2T5)
32"(2T8)
3163 "
3FT IND
91"(1T5, 1T8, 2T5)
95"(2T8)
2163 "
WIREFEED
71-3/8"(1T5, 1T8, 2T5)
75-3/8"(2T8)
WIREFEED
8FT IND
1"
1"
MOUNT
MOUNT
35-3/8"(1T5, 1T8, 2T5)
36-3/8"(2T8)
95-3/8"(1T5, 1T8, 2T5)
99-3/8"(2T8)
FEATURES AND OPTIONS
6+,(/',1*237,216
&251(5
6
+LJK3HUIRUPDQFH/RXYHU
63
+LJK3HUIRUPDQFH/RXYHUZLWK
$FU\OLF2YHOD\
6
6DWLQ:KLWH/HQV
6+7
+LJK7UDQVPLVVLRQ/HQV
65
6DWLQ:KLWH5HJUHVV/HQV
'2:1/,*+7237,216
%HJLQQLQJRI¿[WXUH
0LGGOHRI¿[WXUH
Specifications and Dimensions subject to change without notice.
Neo-Ray • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADN100250
05/28/2010 10:28:39 AM
Catalog Number:
23DR-1T5-ETG-7-U-EB-SI-S93
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
Type:
C2
Notes: FACTORY DRAWINGS TO FOLLOW
ISI13-6025
"‡,9
DESCRIPTION
A return to simplicity, elegance and minimalism ... Slender lines of light set
in an architectural environment are the essence of Straight and Narrow. This
series accommodates most architectural lighting design applications.
Generation II enhancements and new features:
- Extruded housing offers precise in-line appearance and enhanced rigidity
- Staggered lamping minimizes socket shadow
- Flush and regressed lay in lens provides clean look and easy maintenance
- Unique snap in louver design for easy installation and better retention
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
Construction
Extruded aluminum housing.
Nominal 3', 4', 6' or 8' fixtures.
Shielding
Trimless lay-in white, high
transmission or regressed acrylic
diffuser. Snap-in, high
performance, parabolic louver with
or without ovelay.
Electrical
120, 277, 347 or Universal Voltage
electronic ballast. Fixtures and
electrical components certified to
UL and CUL standards.
Damp Location listing available.
Downlight
20W or 35W MR16 fixed or
adjustable available
Finish
Durable, low gloss, white, powder
coated acrylic. Optional custom
finish.
Mounting
Recessed:
(ETG) 15/16" Exposed T-grid
(STG) 9/16" Screw Slot Grid
(SR) Sheet Rock (Flanged)
(FSR) Sheet Rock (Flangeless)
(FTG) 9/16" Exposed T-grid
23DR
Straight &
Narrow
Gen II
SUPPORT WIRE
(BY OTHERS)
Individual
1 & 2 T5
1 & 2 T5HO
1 & 2 T8
Recessed
Direct
5 1⁄16”
5 1⁄16”
Light Distribution:
Indirect = 0%
Direct = 100%
CEILING PANEL
(BY OTHERS)
3 15⁄16”
S23DR/1T8 or 2T8 ETG WITH LENS
(ALSO AVAILABLE WITH LOUVER)
3 15⁄16”
S23DR/1T5 or 2T5 ETG WITH LOUVER
(ALSO AVAILABLE WITH LENS)
ORDERING INFORMATION
SAMPLE NUMBER: 23DR-1T5-ETG-4-UEB-SI-S23R
23
Series
23 = Straight &
Narrow
D
Light
Output
D =Direct
Mounting
R =Recessed
RDL =Recessed
with Downlight
Lamp Type
T5
T5HO
T8
Number of Lamps
(not included)
1 =1 Lamp
2 =2 Lamps
Length
3 =3 ft
4 =4 ft
7=
7 ftft
6 =6
8 =8 ft
2
Ballast
Voltage
EB =Electronic
1 =120V
Ballast
2 =277V
DB =Dimming
3 =347V
Ballast
U =Universal
Switching
Options
SI =Single
Switching
DU =Dual
Switching
Electronic Dimming Balast Options
1 = Lutron 3 wire line voltage 1% dimming
1 Required voltage information.
Ceiling Type
2 = Lutron 3 wire line voltage 10% dimming
t 4UBOEBSE&.1BDLJTGPSMBNQ
ETG =15/16” exposed T-grid
t For some electronic, dimming and EM battery pack ballast
3 = Lutron Eco System Bus 1% dimming
STG = Slot T-grid
combinations, fixture has space limitation (consult factory).
4 = Lutron Eco System Bus 10% dimming
t 'PSEJNNJOHTQFDJGZCBMMBTUPQUJPO
SR =Sheet Rock (Flanged)
5 = 0-10 Volt dimming
t Due to various constraints, some options may not be
FSR =Sheet Rock ( Trimless)
6 = Hot & Neutral line voltage dimming
combined with others.
P lease consult your COOPER
FTG =9/16” exposed T-grid
7 = 2 step dimming
Lighting representative for additional information.
2 Individual fixtures cannot be combined into runs
t "DSZMJDMFOTFTXJMMCFTMJHIUMZTIPSUFSUIBOIPVTJOHMFOHUIBUBNCJFOUUFNQFSBUVSFJOPSEFSUPDPNQFOTBUFGPSOPSNBMUIFSNBMFYQBOTJPOEVSJOHPQFSBUJPO
3 Regress lens not available with T5HO lamping
Emergency 1
EM = Emergency
Pack
EC = Emergency
Circuit
Shielding Options
S90 =High performance louver
S90P =High performance
louver with acrylic overlay
S90W =White painted louver
S90WP =White painted louver
with acrylic overlay
S93 =Satin white lens
S93HT =High transmission lens
3
S23R=Satin white regress lens
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Fusing
GLR
GMF
Downlight Options
(2) MR16 F =
Up to 35W (fixed)
(2) MR16A =
Up to 35W (adjustable)
Optional Accessory
(Downlight only)
F1 =Hex Cell Louver
F2 =Prismatic Spread Lens
F3 =Linear Spread Lens
F4 =Milk White Lens
ADN100250
05/28/2010 10:28:39 AM
Catalog Number:
23DR-1T5-ETG-7-U-EB-SI-S93
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
PHOTOMETRICS
Û
Û
300
Û
ISI13-6025
Candela
Zone
Lumens
%Lamp
%Fixt
0-30
0-40
0-60
0-90
0-180
640.19
1018.79
1702.2
2105.97
2105.97
22.10
35.10
58.70
72.60
72.60
30.40
48.40
80.80
100.00
100.00
Angle
0
5
10
15
25
35
45
55
65
75
85
90
Total Luminaire Efficiency = 72.60%
600
Û
900
0˚
LEGEND:
0-deg:
45-deg:
90-deg:
15˚
30˚
C2
Notes: FACTORY DRAWINGS TO FOLLOW
Zonal Lumen Summary
23DR
S23DR-1T5-S93HT
Type:
(1) T5 Lamp
S92HT - High Transmission Lens
White Painted Upper Reflector
White Painted Optic Chamber
Efficiency: 72.60%
Report#: P30310
Straight & Narrow - Gen II 23DR
0
1243
1235
1210
1171
1054
895
713
526
347
186
56
0
45
1243
1232
1203
1156
1023
854
672
491
324
176
51
0
90
1243
1221
1187
1136
990
812
630
458
303
166
49
0
MOUNTING INFORMATION
ETG (15/16" Exposed T-Grid)
Mounting Details
47⁄8” Grid center to center
2163 "
3163 "
FTG ( 9/16" Fine T-Grid)
Mounting Details
45⁄8” Grid center to center
STG ( 9/16" Slot T-Grid)
Mounting Details
SR (Sheetrock)
Mounting Details
FSR (Flangeless Sheetrock)
Mounting Details
45⁄8” Grid center to center
4¼” Rough in wide opening
4¼” Rough in wide opening
43"(1T5, 1T8, 2T5)
44"(2T8)
67"(1T5, 1T8, 2T5)
71"(2T8)
2163 "
3163 "
WIREFEED
WIREFEED
6FT IND
4FT IND
1"
1"
MOUNT
47-3/8"(1T5, 1T8, 2T5)
48-3/8"(2T8)
2163 "
3163 "
MOUNT
31"(1T5, 1T8, 2T5)
32"(2T8)
3163 "
3FT IND
91"(1T5, 1T8, 2T5)
95"(2T8)
2163 "
WIREFEED
71-3/8"(1T5, 1T8, 2T5)
75-3/8"(2T8)
WIREFEED
8FT IND
1"
1"
MOUNT
MOUNT
35-3/8"(1T5, 1T8, 2T5)
36-3/8"(2T8)
95-3/8"(1T5, 1T8, 2T5)
99-3/8"(2T8)
FEATURES AND OPTIONS
6+,(/',1*237,216
&251(5
6
+LJK3HUIRUPDQFH/RXYHU
63
+LJK3HUIRUPDQFH/RXYHUZLWK
$FU\OLF2YHOD\
6
6DWLQ:KLWH/HQV
6+7
+LJK7UDQVPLVVLRQ/HQV
65
6DWLQ:KLWH5HJUHVV/HQV
'2:1/,*+7237,216
%HJLQQLQJRI¿[WXUH
0LGGOHRI¿[WXUH
Specifications and Dimensions subject to change without notice.
Neo-Ray • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADN100250
05/28/2010 10:28:39 AM
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
Catalog Number:
Type:
DP-880-PT(LSV)-4F39-277-WH-SINDM
Notes:
P2
ISI13-6025
FIXTURE NO.: DP-880 - PT(LSV) - 4F39 - 277 - WH - SIN - DM
JOB NAME:
JOB TYPE:
DRAWN BY:
DATE DRAWN: 02/20/13
QUANTITY:
REVISED BY:
DATE REVISED:
REVISION:
MANNING LIGHTING, INC. 1810 NORTH AVENUE, P.O. BOX 1063 SHEBOYGAN, WI 53082-1063, PH.920-458-2184, FX.920-458-2491,manningltg.com
SPECIFICATIONS
PLEASE NOTE: INDICATE ANY CHANGES TO THE FIXTURE AS SHOWN. BE AWARE THAT ANY CHANGES SPECIFIED MAY AFFECT COST, SCHEDULE AND
REQUIRE AN UPDATED SUBMITTAL DRAWING. IF NO CHANGES ARE NOTED, MANNING LIGHTING WILL PRODUCE THE PRODUCT WITH THESE SPECIFICATIONS.
DESIGN MODIFICATION RIGHTS RESERVED
Height
Diameter
OAH
5"
24"
29"
HOUSING: Consists of spun aluminum top and bottom rings and thermoformed opal white acrylic drum diffuser.
MOUNTING: Fixture mounts to a standard octagonal junction box.
FINISHES: - PT (LSV) Light Silver. All metal surfaces are coated with a low VOC, thermo-cure, automotive quality lacquer.
LAMPING: [4F39] Provisions for (4) 39 watt twin tube 2G11 base compact fluorescent lamps supplied by others. Powered by integral electronic high
power factor class A ballasts, 120 or 277 volt, 60Hz.
VOLTAGE: 277
DIFFUSER: (WH) Opal White Acrylic. 1/8" thick opal virgin acrylic with gloss surface finish.
STEM: (SIN) Single Stem.
STD. OPTIONS: [DM] Fluorescent Dimming. Supplied with integral Lutron electronic fluorescent dimming ballast 120 or 277 volt, 60 Hz.
APPROVED: ___________________________________________________________
DATE: ____________________________
©2010 MANNING LIGHTING:
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
Catalog Number:
Type:
DP-880-PT(LSV)-4F39-277-WH-SINDM
Notes:
ISI13-6025
P2
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
Catalog Number:
Type:
DP-882-PT(LSV)-4F40-277-WH-SINDM
Notes:
P3
ISI13-6025
FIXTURE NO.: DP-882 - PT(LSV) - 4F40 - 277 - WH - SIN - DM
JOB NAME:
JOB TYPE:
DRAWN BY:
DATE DRAWN: 02/20/13
QUANTITY:
REVISED BY:
DATE REVISED:
REVISION:
MANNING LIGHTING, INC. 1810 NORTH AVENUE, P.O. BOX 1063 SHEBOYGAN, WI 53082-1063, PH.920-458-2184, FX.920-458-2491,manningltg.com
SPECIFICATIONS
PLEASE NOTE: INDICATE ANY CHANGES TO THE FIXTURE AS SHOWN. BE AWARE THAT ANY CHANGES SPECIFIED MAY AFFECT COST, SCHEDULE AND
REQUIRE AN UPDATED SUBMITTAL DRAWING. IF NO CHANGES ARE NOTED, MANNING LIGHTING WILL PRODUCE THE PRODUCT WITH THESE SPECIFICATIONS.
DESIGN MODIFICATION RIGHTS RESERVED
Height
Diameter
OAH
5.5"
30"
29.5"
HOUSING: Consists of spun aluminum top and bottom rings and thermoformed opal white acrylic drum diffuser.
MOUNTING: Fixture mounts to a standard octagonal junction box.
FINISHES: - PT (LSV) Light Silver. All metal surfaces are coated with a low VOC, thermo-cure, automotive quality lacquer.
LAMPING: [4F40] Provisions for (4) 40 watt twin tube 2G11 base compact fluorescent lamps supplied by others. Powered by integral electronic high
power factor class A ballasts), 120 or 277 volt, 60Hz.
VOLTAGE: 277
DIFFUSER: (WH) Opal White Acrylic. 1/8" thick opal virgin acrylic with gloss surface finish.
STEM: (SIN) Single Stem.
STD. OPTIONS: [DM] Fluorescent Dimming. Supplied with integral Lutron electronic fluorescent dimming ballast 120 or 277 volt, 60 Hz.
APPROVED: ___________________________________________________________
DATE: ____________________________
©2010 MANNING LIGHTING:
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
Catalog Number:
Type:
DP-882-PT(LSV)-4F40-277-WH-SINDM
Notes:
ISI13-6025
P3
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
Catalog Number:
Type:
DP-884-PT(LSV)-6F40-277-WH-SINDM
Notes:
P4
ISI13-6025
FIXTURE NO.: DP-884 - PT(LSV) - 6F40 - 277 - WH - SIN - DM
JOB NAME:
JOB TYPE:
DRAWN BY:
DATE DRAWN: 02/20/13
QUANTITY:
REVISED BY:
DATE REVISED:
REVISION:
MANNING LIGHTING, INC. 1810 NORTH AVENUE, P.O. BOX 1063 SHEBOYGAN, WI 53082-1063, PH.920-458-2184, FX.920-458-2491,manningltg.com
SPECIFICATIONS
PLEASE NOTE: INDICATE ANY CHANGES TO THE FIXTURE AS SHOWN. BE AWARE THAT ANY CHANGES SPECIFIED MAY AFFECT COST, SCHEDULE AND
REQUIRE AN UPDATED SUBMITTAL DRAWING. IF NO CHANGES ARE NOTED, MANNING LIGHTING WILL PRODUCE THE PRODUCT WITH THESE SPECIFICATIONS.
DESIGN MODIFICATION RIGHTS RESERVED
Height
Diameter
OAH
6.75"
36"
31"
HOUSING: Consists of spun aluminum top and bottom rings and thermoformed opal white acrylic drum diffuser.
MOUNTING: Fixture mounts to a standard octagonal junction box.
FINISHES: - PT (LSV) Light Silver. All metal surfaces are coated with a low VOC, thermo-cure, automotive quality lacquer.
LAMPING: [6F40] Provisions for (6) 40 watt twin tube 2G11 base compact fluorescent lamps supplied by others. Powered by integral electronic high
power factor class A ballasts, 120 or 277 volt, 60Hz.
VOLTAGE: 277
DIFFUSER: (WH) Opal White Acrylic. 1/8" thick opal virgin acrylic with gloss surface finish.
STEM: (SIN) Single Stem.
STD. OPTIONS: [DM] Fluorescent Dimming. Supplied with integral Lutron electronic fluorescent dimming ballast 120 or 277 volt, 60 Hz.
APPROVED: ___________________________________________________________
DATE: ____________________________
©2010 MANNING LIGHTING:
Submitted by Illumination Systems, Inc
Job Name:
CU Foundation
Architect: Bennett, Wagner, & Grody
(Denver)
Engineer: RMH Group (Lakewood)
Catalog Number:
Type:
DP-884-PT(LSV)-6F40-277-WH-SINDM
Notes:
ISI13-6025
P4
Date: Feb 19, 2013
Page 1/1
Transmittal
Project
UCD - CU Foundation - Fitzsimons
Location Denver CO
Contact:
Visual Interest, Inc.
3511 Ringsby Court
Denver CO 80216
Phone: (303) 861-8448
From: Emily Moore
ATTACHED WE ARE SENDING YOU 0 COPIES OF THE FOLLOWING ITEMS:
Drawings
Specifications
Other:
Prints
Information
Plans
X Submittals
THESE ARE TRANSMITTED FOR:
Prior Approval
X Approval
Approval as Submitted
Approval as Noted
Type
FF00009
Resubmittal for Approval
Corrections
Your Use
Review and Comment
Record
Bids due on:
Other:
MFG
Part
B1
Louis Poulsen
B2
Louis Poulsen
MUNK-MEG 3/40W/T-5 2GX13 120/
277V SATIN CHR PLA
MUNK 18.1 3/26W/CF GX24Q-3 120277V SATIN CHR PLA OPAL
Page 1/1
Submitted by Visual Interest, Inc.
Job Name:
UCD - CU Foundation - Fitzsimons
Architect: Bennett Wagner & Grody
Architects (Denver)
Catalog Number:
MUNK-MEG 3/40W/T-5 2GX13 120/
277V SATIN CHR PLA
Type:
B1
Notes:
VILTG13-10678
Munkegaard Mega
PRODUCT SPECIFICATION
MUNK MEGA CF
Product description
Weblink: 218
Design: Arne Jacobsen
Light Concept: The fixture resembles a glass disc hovering just below the ceiling. This impression is
primarily created by the illuminated opening. The diffuser provides soft uniform lighting. This fixture
gives the room the illusion of extra height.
Finish: High lustre chrome plated or satin chrome plated. White opal acrylic.
Material: Diffuser: White opal acrylic. Trim ring: Satin chrome plated, brass.
Mounting: Semi-recessed: Provided with vertically adjustable brackets spaced equally. Luminaire
frame
should be structurally supported independent of the ceiling suspension and installed prior to closing
the ceiling.
Ceiling types: Accessible and non-accessible ceilings. Ceiling cutout: 29.2” diameter.
Weight: Max. 18 lbs.
Label: cULus, Damp location. IBEW.
Product code
Light source
Voltage
Finish
MUNK-MEGA
3/40W/T-5 2GX13
120-277V
CHR
SATIN CHR PLA
a. Provided with three 120-277V integral electronic ballasts.
I. Require mounting frame (by others) and is only provided with four “L” brackets.
II. The comparable EU version has the following classification: Ingress Protection
Code: IP20.
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
1/3
Submitted by Visual Interest, Inc.
Job Name:
UCD - CU Foundation - Fitzsimons
Architect: Bennett Wagner & Grody
Architects (Denver)
Catalog Number:
MUNK-MEG 3/40W/T-5 2GX13 120/
277V SATIN CHR PLA
Type:
B1
Notes:
VILTG13-10678
Munkegaard Mega
PRODUCT SPECIFICATION
MUNK MEGA CF
Material description
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
2/3
Submitted by Visual Interest, Inc.
Job Name:
UCD - CU Foundation - Fitzsimons
Architect: Bennett Wagner & Grody
Architects (Denver)
Catalog Number:
MUNK-MEG 3/40W/T-5 2GX13 120/
277V SATIN CHR PLA
Type:
B1
Notes:
VILTG13-10678
Munkegaard Mega
PRODUCT SPECIFICATION
MUNK MEGA CF
Light measurements
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
3/3
Catalog Number:
Type:
MUNK 18.1 3/26W/CF GX24Q-3 120277V SATIN CHR PLA OPAL
Submitted by Visual Interest, Inc.
Job Name:
UCD - CU Foundation - Fitzsimons
Architect: Bennett Wagner & Grody
Architects (Denver)
Notes:
B2
VILTG13-10678
Munkegaard LED
PRODUCT SPECIFICATION
MUNK-18.1-3-26W-CF
Product description
Weblink: 106
Design: Arne Jacobsen
Light Concept: The fixture resembles a glass disc hovering just below the ceiling. This impression is
primarily created by the illuminated opening. The diffuser provides soft uniform lighting. This fixture
gives the room the illusion of extra height.
Finish: High lustre chrome plated or satin chrome plated. Prismatic acrylic. White opal glass.
Material: Diffuser: White opal glass or prismatic acrylic. Trim ring: High lustre chrome plated or satin
chrome plated, brass.
Mounting: Semi-recessed: Provided with vertically adjustable brackets spaced equally. Luminaire
frame
should be structurally supported independent of the ceiling suspension and installed prior to closing
the ceiling.
Ceiling types: Accessible and non-accessible ceilings. Ceiling cutout: 17” diameter, 19.5” diameter or
9.5”
diameter.
Weight: Max. 19 lbs.
Label: cULus, Damp location. IBEW.
Product code
Dimension
Light source
Voltage
Finish
Diff./Encl./Glass
Options
MUNK
10.4"
18.1"
20.7"
37W LED/3000K
37W LED/4000K
1/39W/CMH/T-6 G12
1/22W/1/40W T-5 2GX13
1/26W/32W/CF GX24q-3
3/26W/CF G24q-3
4/26W/CF G24q-3
1/75W/A-19/IF medium
3/75W/A-19/IF medium
120/220/240/277V
120-277V
120/277V
120V
277V
CHR
SATIN CHR PLA
OPAL
PRISMATIC
NOT APPLICABLE
EMPK
DIMMING
a. 10.4" variant available in 37W LED, 1/39W/CMH, 1/26W/32W/CF and 1/75W/A-19.
b. 18.1" variant available in 1/22W/1/40W/T5, 3/26W/CF and 3/75W/A-19.
c. 20.7" variant available in 1/22W/1/40W//T5, 4/26W/CF and 3/75W/A-19.
d. CMH variant provided with one 120V or 277V integral electronic ballast.
e. CF variants provided with one 120-277V integral electronic ballast for 10.4".
f. CF and FC variants provided with two 120-277V integral electronic ballasts for 18.1" and 20.7".
g. Incandescent variant only available in 120V.
h. EMPK (emergency power pack) is only available for CF and FC variants.
i. EMPK is available in 120/277V.
j. Dimming option is only available for CF variants.
k. Dimming variant is available in 120/220/240/277V with LUTRON ® 3-wire control.
l. LED variants provided with one integral dimmable electronic driver for 120V or 277V.
m. All LED wattages are system power.
n. Prismatic diffuser only available for 18.1" and 20.7".
I. 10.4” variant is provided with mounting frame and two brackets.
II. 18.1” and 20.7” variants requires mounting frames (by others) and are only
provided with three or four “L” brackets.
III. The comparable EU version has the following classification: Ingress Protection Code: IP20.
IV. LED technology is rapidly changing. Specifications are based on present technology. For
most up
to date specifications see www.louispoulsen.com.
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
1/3
Submitted by Visual Interest, Inc.
Job Name:
UCD - CU Foundation - Fitzsimons
Architect: Bennett Wagner & Grody
Architects (Denver)
Catalog Number:
Type:
MUNK 18.1 3/26W/CF GX24Q-3 120277V SATIN CHR PLA OPAL
Notes:
B2
VILTG13-10678
Munkegaard LED
MUNK-18.1-3-26W-CF
PRODUCT SPECIFICATION
Material description
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
2/3
Submitted by Visual Interest, Inc.
Job Name:
UCD - CU Foundation - Fitzsimons
Architect: Bennett Wagner & Grody
Architects (Denver)
Catalog Number:
Type:
MUNK 18.1 3/26W/CF GX24Q-3 120277V SATIN CHR PLA OPAL
Notes:
B2
VILTG13-10678
Munkegaard LED
MUNK-18.1-3-26W-CF
PRODUCT SPECIFICATION
Light measurements
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
3/3
MH Lighting and Controls
1044 Speer Blvd
Denver Co 80204
Phone: (303) 573-0222
Fax: (303) 573-0922
Date: Feb 18, 2013
Job Name
UCHSC - Anschutz Medical Campus Building 500 CU Foundation Renovation
Aurora CO
Bid Date
Feb 4, 2013
Submittal Date
Feb 18, 2013
Architect:
Bennett Wagner Grody Architects
1301 Wazee St, Suite 100
Denver CO 80204
Engineer:
RMH Group, Inc.
12600 W Colfax Ave Ste A400
Lakewood CO 80215
Date: Feb 18, 2013
Page 1/1
Transmittal
Project
UCHSC - Anschutz Medical Campus
Building 500 CU Foundation Renovation
Location Aurora CO
To
QED Denver
1661 W. 3rd Ave.
Denver CO 80223
Contact: Don Mason
MH Lighting and Controls
1044 Speer Blvd
Denver Co 80204
Phone: (303) 573-0222
From: Brittany Heck
ATTACHED WE ARE SENDING YOU 0 COPIES OF THE FOLLOWING ITEMS:
Drawings
Specifications
Other:
Prints
Information
Plans
X Submittals
THESE ARE TRANSMITTED FOR:
Prior Approval
X Approval
Approval as Submitted
Approval as Noted
Type
Resubmittal for Approval
Corrections
Your Use
Review and Comment
Record
Bids due on:
Other:
MFG
Part
A1
Columbia
A1D
Columbia
A2
D1
D1D
Columbia
Prescolite
Prescolite
D2
Prescolite
D2D
Prescolite
W1
Deltalight USA
EPC14-228G-SH-EP95U-F5835-C388
VOLTAGE=120/277
EPC14-228G-SH-ESD95U-F5835C488 VOLTAGE=120/277
CN4-228-EPU
D418EB VOLTAGE=120/277 4D5 B24
D418EBDM VOLTAGE=SPECIFY 4D5
B24
CFR6126EB VOLTAGE=120/277
ST372A1 B24 SR6080NF
CFR6126EBDM VOLTAGE=SPECIFY
ST372A1 B24 SR6080NF
6 304 17 01* 6 300 90 90 U
VOLTAGE=120 6 207 02 04 302 20 22
X1
Item Note: Specify Mounting
Dual Lite Emergency LESC*G*NA-W
Notes:
Please review the attached submittals for approval. Please return one set of signed
approvals back to my office with your orders. Feel free to call with any questions.
Thank You.
FF00009
Page 1/1
Feb 18, 2013
Don Mason
QED Denver
1661 W. 3rd Ave.
Denver CO 80223
RE:
UCHSC - Anschutz Medical Campus Building 500 CU Foundation Renovation
Aurora CO
Dear Don
Type
MFG
Part
A1
Columbia
A1D
Columbia
A2
D1
D1D
Columbia
Prescolite
Prescolite
D2
Prescolite
D2D
Prescolite
W1
Deltalight USA
EPC14-228G-SH-EP95U-F5835-C388
VOLTAGE=120/277
EPC14-228G-SH-ESD95U-F5835C488 VOLTAGE=120/277
CN4-228-EPU
D418EB VOLTAGE=120/277 4D5 B24
D418EBDM VOLTAGE=SPECIFY 4D5
B24
CFR6126EB VOLTAGE=120/277
ST372A1 B24 SR6080NF
CFR6126EBDM VOLTAGE=SPECIFY
ST372A1 B24 SR6080NF
6 304 17 01* 6 300 90 90 U
VOLTAGE=120 6 207 02 04 302 20 22
X1
Item Note: Specify Mounting
Dual Lite Emergency LESC*G*NA-W
Please review the attached submittals for approval. Please return one set of signed
approvals back to my office with your orders. Feel free to call with any questions.
Thank You.
FF00010
Page 1/1
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
EPC14-228G-SH-EP95U-F5835C388 VOLTAGE=120/277
Type:
A1
Notes:
MHDN13-50590
EPC14-1, EPC14-2
1' × 4' High Efficiency, e•poc® Full Distribution Luminaire / 1 or 2-Lamp T5, T8
Project Information
Project Name
Type
Catalog No.
Date
Construction
Luminaire housing, end caps, and reflectors are
die-formed code-gauge cold-rolled steel. Frameless
optics system hinges from either side for easy access
to lamps and electrical components. Mechanical
light trap prevents light leaks. Latches are spring
loaded.
Features
• Both T5 and T8 optical systems available
• Full distribution provides controlled high angle light for
visual comfort
• Advanced optical design produces high efficiencies
• Exclusive T8 EnergyMax® tuned 1.04 ballast factor ballast
• Step dimming options available for both T5 and T8 expand
energy savings opportunities
• Low W/ft2 ratio meets the most restrictive lighting power
density codes
• Typically qualifies for EPAct tax deductions
• Unique frameless optics system allows easy access to lamps
and electrical from below the ceiling
• Lens styles provide aesthetic alternatives
• Low profile housing fits in tight plenum spaces
Finish
All visible parts are custom formulated soft, nonglare high-reflectance white powder coat finish,
painted after fabrication.
Shielding
Lenses are high transmission extruded acrylic.
Installation
An access plate is furnished with each recessed
fixture for fast wiring connections without the
necessity to open the fixture or wireway.
Ballasts
Energy efficient, thermally protected, automatic
resetting, Class P, high power factor, sound rated A,
magnetic or electronic ballasts. CEE NEMA Premium
compliant.
Ordering Information
EPC
14 –
Model
No. of Lamps
Ceiling Type
1 One
2 Two (T5 only)
G Grid
SM Surface Mount
For hard ceilings use
flange kit.
Size
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28, or
25 Watt
54 4', T5HO: 54 or 51
Watt
Accessories
(Order Separately)
FK14 1' × 4' Single Flange Kit
FKCR Flange Kit Row Adaptor
Damp Label - standard
1
Not compatible with T8 25, 28, or 30 watt energy savings lamps.
2
Where available.
3
Not recommended for use with step or full dimming.
4
For e•poc Plus, order "-PlusXX" lamps under "Options."
Protected by US Patents D593,246; D617,487.
Additional US and Canada Patents Pending.
Specifications subject to change without notice.
Page 1/2 Rev. 04/26/11
Standard class “P”, thermally protected,
autoresetting HPF ballast, sound rated A. CEE NEMA
Premium compliant. All ballast leads extend a
minimum of 6" through access location. NEC/CECcompliant ballast disconnect is standard.
Emergency
Field installation of battery packs requires use of
remote test switch.
Ceiling Compatibility
Luminaire is available to fit exposed grid ceilings,
or hard ceilings when a flange kit is ordered. Some
options may increase fixture depth. For information
on compatibility with specific ceilings, or where
plenum depth is a problem, contact your Columbia
Lighting representative. Four integral T-bar clips are
standard.
Certification
All luminaires are built to UL 1598 standards and
bear appropriate UL and cUL or CSA labels. Damp
location labeling is standard. Emergency-equipped
fixtures labeled UL 924.
Example EPC14-132G-DL-EU-FO735
–
EPC e∙poc® Full
Distribution
Luminaire
14 1' × 4'
Electrical
–
Shielding
DL Delta Profile
–
Air Function
Blank Static
SH Shield Profile
–
–
U 120V-277V
347 347V2
C388
C488
C588
EL
GLR
GMF
NYC
NYCU
Voltage
Ballast
E
ED
ESD
ELW
EHL
E104
ESD104
EP104
EP
EP95
ESD95
EP115
ESD115
ESD80
Options
3-Wire Flex
4-Wire Flex
5-Wire Flex
Emergency Battery Pack
Fast Blow Fuse
Slow Blow Fuse
NYC Compliant
NYC Compliant, Union Label
Lamps
Electronic T8, 0.88 Ballast Factor, Instant Start
Electronic T8, T5, T5HO Dimming, Programmed Start2
Electronic T8, 0.88 Ballast Factor, Step Dimming, Programmed Start 1
Electronic T8, 0.77 Ballast Factor, Low Wattage, Instant Start
Electronic T8, 1.18 Ballast Factor, High Wattage, Instant Start
Electronic T8, 1.04 Ballast Factor, Instant Start4 (N/A 1-Lamp)
Electronic T8, 1.04 Ballast Factor, Step Dimming, Programmed Start1, 4
Electronic T8, 1.04 Ballast Factor Programmed Start4
Electronic T5, T5HO, 1.0 Ballast Factor or T8, 0.88 Ballast Factor,
Programmed Start
Electronic T5, 0.95 Ballast Factor , Programmed Start (N/A T5HO, 1-Lamp)
Electronic T5, 0.95 Ballast Factor, Step Dimming, Programmed Start (N/A
T5HO, 1-Lamp)
Electronic T5, 1.15 Ballast Factor, Programmed Start (N/A T5HO, 1-Lamp)
Electronic T5, 1.15 Ballast Factor, Step Dimming, Programmed Start (N/A
T5HO, 1-Lamp)
Electronic T5HO, 0.80 Ballast Factor, Step Dimming, Programmed Start
(2-Lamp 54W only)
FO730 30K 75CRI T8 Lamps Installed
FO735 35K 75CRI T8 Lamps Installed
FO741 41K 75CRI T8 Lamps Installed
FO830 30K 82CRI T8 Lamps Installed
FO835 35K 82CRI T8 Lamps Installed
FO841 41K 82CRI T8 Lamps Installed
PLUS30 30K 82CRI 28W T8 Lamps Installed 3
PLUS35 35K 82CRI 28W T8 Lamps Installed 3
PLUS41 41K 82CRI 28W T8 Lamps Installed 3
FOH830 30K High Lumen T8 Lamps Installed
FOH835 35K High Lumen T8 Lamps Installed
FOH841 41K High Lumen T8 Lamps Installed
F5830 30K 85CRI T5 or T5HO Lamps Installed
F5835 35K 85CRI T5 or T5HO Lamps Installed
F5841 41K 85CRI T5 or T5HO Lamps Installed
F5H830 30K High Lumen T5 Lamps Installed
F5H835 35K High Lumen T5 Lamps Installed
F5H841 41K High Lumen T5 Lamps Installed
Recessed Architectural / EPC14-1, EPC14-2
© 2011 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change
specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
EPC14-228G-SH-EP95U-F5835C388 VOLTAGE=120/277
Type:
A1
Notes:
MHDN13-50590
EPC14-1, EPC14-2
1' × 4' High Efficiency, e•poc® Full Distribution Luminaire / 1 or 2-Lamp T5, T8
Photometric Data
26
Recessed
0º = 90 90º = 90
Ballast
Ballast Factor
Lamp
Lumens per
Lamp
Watts
Mounting
Shielding
Angle
Spacing
Criterion
Luminous
Opening in
Feet
2271
2275
2266
2258
2248
2231
2215
2191
2165
2210
2018
1555
2271
2291
2296
2301
2310
2323
2414
2441
2330
2121
1790
1138
2271
2291
2322
2352
2402
2519
2500
2386
2194
1942
1561
835
2271
2298
2335
2371
2464
2531
2473
2339
2127
1852
1447
759
Length: 3.83
Width: 0.85
Height: 0.00
Zonal Lumen Summary
Zone
0-30
0-40
0-60
0-90
0-180
19.7
32.6
59.7
77.8
77.8
RC
RW
1
2
3
4
5
6
7
8
9
10
70
84
76
69
63
58
54
50
46
43
40
80
50 30
80 77
70 64
61 54
54 47
48 41
43 36
39 32
35 29
32 26
30 24
10
74
60
49
41
35
31
27
24
21
19
70
82
74
67
61
56
52
48
45
42
39
70
50 30
79 76
68 63
60 54
53 46
47 40
42 35
38 32
35 28
32 26
29 23
10
73
59
49
41
35
30
27
24
21
19
50
75
65
57
51
45
41
37
34
31
29
50
30
73
61
52
45
39
35
31
28
25
23
Indoor Candela Plot
10
70
57
48
40
35
30
27
24
21
19
0
0
65
53
44
38
32
28
25
22
20
18
25.3
41.9
76.7
100.0
100.0
34
Recessed
0º = 90 90º = 90
2222
2218
2210
2198
2186
2156
2116
2058
1953
1789
1523
1176
2222
2226
2219
2212
2202
2185
2162
2144
2117
2172
2018
1555
2222
2237
2240
2244
2258
2271
2361
2402
2320
2121
1790
1100
2222
2241
2270
2296
2346
2461
2460
2371
2204
1929
1542
797
2222
2241
2283
2315
2412
2479
2434
2324
2127
1840
1447
759
0º = 1.28 90º = 1.30
Length: 3.83
Width: 0.85
Height: 0.00
Zonal Lumen Summary
Zone
0-30
0-40
0-60
0-90
0-180
Dimensional Data
20.4
33.7
61.8
80.7
80.7
700
0
15
30
45
Horiz 0-180
77.8%
Luminaire Efficacy Rating (LER)
IESNA RP-1-2004 Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
74
Noncompliant
$3.24 based on 3000 hrs.
and $0.08 per KWH
RC
RW
1
2
3
4
5
6
7
8
9
10
70
87
79
72
66
60
55
51
48
45
42
80
50 30
83 80
72 67
63 56
56 48
50 42
44 37
40 33
37 30
34 27
31 24
10
77
62
51
43
37
32
28
25
22
20
70
85
77
70
64
58
54
50
46
43
41
70
50 30
82 78
71 65
62 55
55 48
49 42
44 37
40 33
36 29
33 27
30 24
10
75
61
50
42
36
32
28
25
22
20
50
78
68
59
52
47
42
38
35
32
30
50
30
75
63
54
47
41
36
32
29
26
24
45.0
90.0
Test 15281 Test Date 12/16/08
10
73
60
49
42
36
31
28
24
22
20
0
0
67
55
46
39
33
29
25
23
20
18
RCR = Room Cavity Ratio
RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
Energy Data
Lumens % Lamp % Fixt.
530
877
1607
2098
2098
60
0.0
Total Luminaire Efficiency
0.0 22.5 45.0 67.5 90.0
0
30
40
45
50
55
60
65
70
75
80
85
75
350
RCR = Room Cavity Ratio
RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
AVG. Luminance (Candela/Sq. M.) Coefficients of Utilization (%)
EPC14-128G
e•poc™ Troffer
Recessed
1-Lamp with Opal
Delta Lens
B228PUNV-C
1.00
F28T5
2600
90
Energy Data
Lumens % Lamp % Fixt.
542
897
1642
2140
2140
RCR
2271
2264
2253
2240
2227
2196
2156
2097
1991
1827
1580
1214
0º = 1.28 90º = 1.30
Luminaire Data
Luminaire
0.0 22.5 45.0 67.5 90.0
0
30
40
45
50
55
60
65
70
75
80
85
RCR
Ballast
Ballast Factor
Lamp
Lumens per
Lamp
Watts
Mounting
Shielding
Angle
Spacing
Criterion
Luminous
Opening in
Feet
EPC14-132G-DL
e•poc™ Troffer
Recessed
1-Lamp with Opal
Delta Lens
ICN-1P32-SC
0.90
F28T8
2750
Average Luminance Angle
Luminaire
Test 15282 Test Date 12/17/08
AVG. Luminance (Candela/Sq. M.) Coefficients of Utilization (%)
Average Luminance Angle
Luminaire Data
25.3
41.8
76.6
100.0
100.0
Total Luminaire Efficiency
80.7%
Luminaire Efficacy Rating (LER)
IESNA RP-1-2004 Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
0
Noncompliant
$3.87 based on 3000 hrs.
and $0.08 per KWH
Indoor Candela Plot
90
75
350
60
700
0
15
30
45
Horiz 0-180
0.0
45.0
90.0
Ceiling Compatibility
Type G
FKCR
37/8"
Side
12"
For lay-in installation in exposed grid
ceilings. Maximum tee widths of 1" and
maximum tee heights of 2" allowed.
Delta profile shown; others available.
For flanged fixtures in row configurations, the FKCR adapter bracket
kit is required in addition to the FK14 kit. Order one less FKCR than
the total number of fixtures in row. (Example: Row of two, order (2)
FK14 & (1) FKCR)
FK14 Flange Kit
117/8"
48"
31/2"
NOTE: All dimensions are in inches; dimensions and
specifications are subject to change without
notice. Please consult factory or check sample
for verification.
Page 2/2 Rev. 04/26/11
End
Side
End
For hard ceiling applications, order FK14
flange kit. Flange kit wires directly into
concealed ceiling opening for a clean,
finished appearance.
Row cut out dimensions using FK14s & FKCR adapters:
Width 123/8", Length [48" × (# in row)] + 3/8".
Example: (48" × 2) + 3/8" = 963/8"
Flange kit cut out dimension for single unit only: 123/8" × 483/8"
Recessed Architectural / EPC14-1, EPC14-2
© 2011 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change
specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
EPC14-228G-SH-ESD95U-F5835C488 VOLTAGE=120/277
Type:
A1D
Notes:
MHDN13-50590
EPC14-1, EPC14-2
1' × 4' High Efficiency, e•poc® Full Distribution Luminaire / 1 or 2-Lamp T5, T8
Project Information
Project Name
Type
Catalog No.
Date
Construction
Luminaire housing, end caps, and reflectors are
die-formed code-gauge cold-rolled steel. Frameless
optics system hinges from either side for easy access
to lamps and electrical components. Mechanical
light trap prevents light leaks. Latches are spring
loaded.
Features
• Both T5 and T8 optical systems available
• Full distribution provides controlled high angle light for
visual comfort
• Advanced optical design produces high efficiencies
• Exclusive T8 EnergyMax® tuned 1.04 ballast factor ballast
• Step dimming options available for both T5 and T8 expand
energy savings opportunities
• Low W/ft2 ratio meets the most restrictive lighting power
density codes
• Typically qualifies for EPAct tax deductions
• Unique frameless optics system allows easy access to lamps
and electrical from below the ceiling
• Lens styles provide aesthetic alternatives
• Low profile housing fits in tight plenum spaces
Finish
All visible parts are custom formulated soft, nonglare high-reflectance white powder coat finish,
painted after fabrication.
Shielding
Lenses are high transmission extruded acrylic.
Installation
An access plate is furnished with each recessed
fixture for fast wiring connections without the
necessity to open the fixture or wireway.
Ballasts
Energy efficient, thermally protected, automatic
resetting, Class P, high power factor, sound rated A,
magnetic or electronic ballasts. CEE NEMA Premium
compliant.
Ordering Information
EPC
14 –
Model
No. of Lamps
Ceiling Type
1 One
2 Two (T5 only)
G Grid
SM Surface Mount
For hard ceilings use
flange kit.
Size
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28, or
25 Watt
54 4', T5HO: 54 or 51
Watt
Accessories
(Order Separately)
FK14 1' × 4' Single Flange Kit
FKCR Flange Kit Row Adaptor
Damp Label - standard
1
Not compatible with T8 25, 28, or 30 watt energy savings lamps.
2
Where available.
3
Not recommended for use with step or full dimming.
4
For e•poc Plus, order "-PlusXX" lamps under "Options."
Protected by US Patents D593,246; D617,487.
Additional US and Canada Patents Pending.
Specifications subject to change without notice.
Page 1/2 Rev. 04/26/11
Standard class “P”, thermally protected,
autoresetting HPF ballast, sound rated A. CEE NEMA
Premium compliant. All ballast leads extend a
minimum of 6" through access location. NEC/CECcompliant ballast disconnect is standard.
Emergency
Field installation of battery packs requires use of
remote test switch.
Ceiling Compatibility
Luminaire is available to fit exposed grid ceilings,
or hard ceilings when a flange kit is ordered. Some
options may increase fixture depth. For information
on compatibility with specific ceilings, or where
plenum depth is a problem, contact your Columbia
Lighting representative. Four integral T-bar clips are
standard.
Certification
All luminaires are built to UL 1598 standards and
bear appropriate UL and cUL or CSA labels. Damp
location labeling is standard. Emergency-equipped
fixtures labeled UL 924.
Example EPC14-132G-DL-EU-FO735
–
EPC e∙poc® Full
Distribution
Luminaire
14 1' × 4'
Electrical
–
Shielding
DL Delta Profile
–
Air Function
Blank Static
SH Shield Profile
–
–
U 120V-277V
347 347V2
C388
C488
C588
EL
GLR
GMF
NYC
NYCU
Voltage
Ballast
E
ED
ESD
ELW
EHL
E104
ESD104
EP104
EP
EP95
ESD95
EP115
ESD115
ESD80
Options
3-Wire Flex
4-Wire Flex
5-Wire Flex
Emergency Battery Pack
Fast Blow Fuse
Slow Blow Fuse
NYC Compliant
NYC Compliant, Union Label
Lamps
Electronic T8, 0.88 Ballast Factor, Instant Start
Electronic T8, T5, T5HO Dimming, Programmed Start2
Electronic T8, 0.88 Ballast Factor, Step Dimming, Programmed Start 1
Electronic T8, 0.77 Ballast Factor, Low Wattage, Instant Start
Electronic T8, 1.18 Ballast Factor, High Wattage, Instant Start
Electronic T8, 1.04 Ballast Factor, Instant Start4 (N/A 1-Lamp)
Electronic T8, 1.04 Ballast Factor, Step Dimming, Programmed Start1, 4
Electronic T8, 1.04 Ballast Factor Programmed Start4
Electronic T5, T5HO, 1.0 Ballast Factor or T8, 0.88 Ballast Factor,
Programmed Start
Electronic T5, 0.95 Ballast Factor , Programmed Start (N/A T5HO, 1-Lamp)
Electronic T5, 0.95 Ballast Factor, Step Dimming, Programmed Start (N/A
T5HO, 1-Lamp)
Electronic T5, 1.15 Ballast Factor, Programmed Start (N/A T5HO, 1-Lamp)
Electronic T5, 1.15 Ballast Factor, Step Dimming, Programmed Start (N/A
T5HO, 1-Lamp)
Electronic T5HO, 0.80 Ballast Factor, Step Dimming, Programmed Start
(2-Lamp 54W only)
FO730 30K 75CRI T8 Lamps Installed
FO735 35K 75CRI T8 Lamps Installed
FO741 41K 75CRI T8 Lamps Installed
FO830 30K 82CRI T8 Lamps Installed
FO835 35K 82CRI T8 Lamps Installed
FO841 41K 82CRI T8 Lamps Installed
PLUS30 30K 82CRI 28W T8 Lamps Installed 3
PLUS35 35K 82CRI 28W T8 Lamps Installed 3
PLUS41 41K 82CRI 28W T8 Lamps Installed 3
FOH830 30K High Lumen T8 Lamps Installed
FOH835 35K High Lumen T8 Lamps Installed
FOH841 41K High Lumen T8 Lamps Installed
F5830 30K 85CRI T5 or T5HO Lamps Installed
F5835 35K 85CRI T5 or T5HO Lamps Installed
F5841 41K 85CRI T5 or T5HO Lamps Installed
F5H830 30K High Lumen T5 Lamps Installed
F5H835 35K High Lumen T5 Lamps Installed
F5H841 41K High Lumen T5 Lamps Installed
Recessed Architectural / EPC14-1, EPC14-2
© 2011 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change
specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
EPC14-228G-SH-ESD95U-F5835C488 VOLTAGE=120/277
Type:
A1D
Notes:
MHDN13-50590
EPC14-1, EPC14-2
1' × 4' High Efficiency, e•poc® Full Distribution Luminaire / 1 or 2-Lamp T5, T8
Photometric Data
26
Recessed
0º = 90 90º = 90
Ballast
Ballast Factor
Lamp
Lumens per
Lamp
Watts
Mounting
Shielding
Angle
Spacing
Criterion
Luminous
Opening in
Feet
2271
2275
2266
2258
2248
2231
2215
2191
2165
2210
2018
1555
2271
2291
2296
2301
2310
2323
2414
2441
2330
2121
1790
1138
2271
2291
2322
2352
2402
2519
2500
2386
2194
1942
1561
835
2271
2298
2335
2371
2464
2531
2473
2339
2127
1852
1447
759
Length: 3.83
Width: 0.85
Height: 0.00
Zonal Lumen Summary
Zone
0-30
0-40
0-60
0-90
0-180
19.7
32.6
59.7
77.8
77.8
RC
RW
1
2
3
4
5
6
7
8
9
10
70
84
76
69
63
58
54
50
46
43
40
80
50 30
80 77
70 64
61 54
54 47
48 41
43 36
39 32
35 29
32 26
30 24
10
74
60
49
41
35
31
27
24
21
19
70
82
74
67
61
56
52
48
45
42
39
70
50 30
79 76
68 63
60 54
53 46
47 40
42 35
38 32
35 28
32 26
29 23
10
73
59
49
41
35
30
27
24
21
19
50
75
65
57
51
45
41
37
34
31
29
50
30
73
61
52
45
39
35
31
28
25
23
Indoor Candela Plot
10
70
57
48
40
35
30
27
24
21
19
0
0
65
53
44
38
32
28
25
22
20
18
25.3
41.9
76.7
100.0
100.0
34
Recessed
0º = 90 90º = 90
2222
2218
2210
2198
2186
2156
2116
2058
1953
1789
1523
1176
2222
2226
2219
2212
2202
2185
2162
2144
2117
2172
2018
1555
2222
2237
2240
2244
2258
2271
2361
2402
2320
2121
1790
1100
2222
2241
2270
2296
2346
2461
2460
2371
2204
1929
1542
797
2222
2241
2283
2315
2412
2479
2434
2324
2127
1840
1447
759
0º = 1.28 90º = 1.30
Length: 3.83
Width: 0.85
Height: 0.00
Zonal Lumen Summary
Zone
0-30
0-40
0-60
0-90
0-180
Dimensional Data
20.4
33.7
61.8
80.7
80.7
700
0
15
30
45
Horiz 0-180
77.8%
Luminaire Efficacy Rating (LER)
IESNA RP-1-2004 Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
74
Noncompliant
$3.24 based on 3000 hrs.
and $0.08 per KWH
RC
RW
1
2
3
4
5
6
7
8
9
10
70
87
79
72
66
60
55
51
48
45
42
80
50 30
83 80
72 67
63 56
56 48
50 42
44 37
40 33
37 30
34 27
31 24
10
77
62
51
43
37
32
28
25
22
20
70
85
77
70
64
58
54
50
46
43
41
70
50 30
82 78
71 65
62 55
55 48
49 42
44 37
40 33
36 29
33 27
30 24
10
75
61
50
42
36
32
28
25
22
20
50
78
68
59
52
47
42
38
35
32
30
50
30
75
63
54
47
41
36
32
29
26
24
45.0
90.0
Test 15281 Test Date 12/16/08
10
73
60
49
42
36
31
28
24
22
20
0
0
67
55
46
39
33
29
25
23
20
18
RCR = Room Cavity Ratio
RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
Energy Data
Lumens % Lamp % Fixt.
530
877
1607
2098
2098
60
0.0
Total Luminaire Efficiency
0.0 22.5 45.0 67.5 90.0
0
30
40
45
50
55
60
65
70
75
80
85
75
350
RCR = Room Cavity Ratio
RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
AVG. Luminance (Candela/Sq. M.) Coefficients of Utilization (%)
EPC14-128G
e•poc™ Troffer
Recessed
1-Lamp with Opal
Delta Lens
B228PUNV-C
1.00
F28T5
2600
90
Energy Data
Lumens % Lamp % Fixt.
542
897
1642
2140
2140
RCR
2271
2264
2253
2240
2227
2196
2156
2097
1991
1827
1580
1214
0º = 1.28 90º = 1.30
Luminaire Data
Luminaire
0.0 22.5 45.0 67.5 90.0
0
30
40
45
50
55
60
65
70
75
80
85
RCR
Ballast
Ballast Factor
Lamp
Lumens per
Lamp
Watts
Mounting
Shielding
Angle
Spacing
Criterion
Luminous
Opening in
Feet
EPC14-132G-DL
e•poc™ Troffer
Recessed
1-Lamp with Opal
Delta Lens
ICN-1P32-SC
0.90
F28T8
2750
Average Luminance Angle
Luminaire
Test 15282 Test Date 12/17/08
AVG. Luminance (Candela/Sq. M.) Coefficients of Utilization (%)
Average Luminance Angle
Luminaire Data
25.3
41.8
76.6
100.0
100.0
Total Luminaire Efficiency
80.7%
Luminaire Efficacy Rating (LER)
IESNA RP-1-2004 Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
0
Noncompliant
$3.87 based on 3000 hrs.
and $0.08 per KWH
Indoor Candela Plot
90
75
350
60
700
0
15
30
45
Horiz 0-180
0.0
45.0
90.0
Ceiling Compatibility
Type G
FKCR
37/8"
Side
12"
For lay-in installation in exposed grid
ceilings. Maximum tee widths of 1" and
maximum tee heights of 2" allowed.
Delta profile shown; others available.
For flanged fixtures in row configurations, the FKCR adapter bracket
kit is required in addition to the FK14 kit. Order one less FKCR than
the total number of fixtures in row. (Example: Row of two, order (2)
FK14 & (1) FKCR)
FK14 Flange Kit
117/8"
48"
31/2"
NOTE: All dimensions are in inches; dimensions and
specifications are subject to change without
notice. Please consult factory or check sample
for verification.
Page 2/2 Rev. 04/26/11
End
Side
End
For hard ceiling applications, order FK14
flange kit. Flange kit wires directly into
concealed ceiling opening for a clean,
finished appearance.
Row cut out dimensions using FK14s & FKCR adapters:
Width 123/8", Length [48" × (# in row)] + 3/8".
Example: (48" × 2) + 3/8" = 963/8"
Flange kit cut out dimension for single unit only: 123/8" × 483/8"
Recessed Architectural / EPC14-1, EPC14-2
© 2011 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change
specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
CN4-228-EPU
Type:
A2
Notes:
MHDN13-50590
CN
T5 Channel / 1 or 2-Lamp T5, T5HO
Project Information
Project Name
Type
Catalog No.
Date
Construction
Heavy gauge cold rolled steel housings fully
assembled. Channel cover provides room-side
access to ballast.
Features
•
•
•
•
•
•
•
Available nominal 2', 3', or 4'
Heavy die formed steel channel
Rotary lock lampholders for positive lamp contact
Individual or row mounting Surface or suspended
Specially designed for use with T5 or T5HO lamps
Narrow 2" strip
KO’s in end cap or back of housing for easier power hook up
Finish
Certification
All luminaires are built to UL 1598 standards and
bear appropriate UL and CUL or CSA labels. Damp
location labeling is standard. Emergency-equipped
fixtures labeled UL 924.
Painted parts are treated with a five stage
phosphate bonding process and finished with a high
reflectance baked white enamel.
Electrical
Standard class “P”, thermally protected, autoresetting HPF ballast, sound rated A. All ballast
leads extend a minimum of 6" through access
location. NEC/CEC-compliant ballast disconnect is
standard.
Ordering Information
CN
–
Model
CN T5 Channel
Example CN4-254-EPU
Size
2
3
4
8
2'
3'
4'
8' (Two 4'
channels
tandem wired
–
No. of Lamps in
cross section
1 One
2 Two
Lamp Type
14
24
21
39
28
54
2', T5: 14 Watt
2', T5HO: 24 Watt
3', T5: 21 Watt
3', T5HO: 39 Watt
4', T5: 28 Watt
4', T5HO: 54 or 51 Watt
–
Ballast
Voltage
EP Electronic T5,
Programmed Start
(Ballast will be
determined by
lamp type.)
4EP 4-Lamp Electronic
T5HO, Programmed
Start (54 Watt only)
For a specific ballast
vendor show as option.
U 120V-277V
347 347V
Options
GLR
GMF
PAF
C&P
EL
Fast Blow Fuse
Slow Blow Fuse
Paint After Fabrication
Cord and Plug
Emergency Battery Pack
(4' fixtures only)
Accessories
(Order separately)
CNR_ Symmetric Reflector for 2', 3', 4'*
CNRA_ Asymmetric Reflector for 2', 3', 4'*
CNSAR_ Specular Symmetric Reflector for 2', 3', 4'*
CNSARA_ Specular Asymmetric Reflector for 2', 3', 4'*
* Specify reflector length.
For additional options and accessories contact factory.
Page 1/2 Rev. 02/25/09
© 2009 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com
Striplights / CN
Catalog Number:
CN4-228-EPU
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Type:
A2
Notes:
MHDN13-50590
CN
T5 Channel / 1 or 2-Lamp T5, T5HO
Photometric Data
Zonal Lumen Summary
Zone
Luminaire Data
Ballast
Ballast Factor
Lamp
Lumens per Lamp
Watts
Spacing Criterion
Luminous Opening
in Feet
CN4-254-EP-PAF
CN Striplight
2" × 48" 2 Lamp Industrial
Striplight
PAV254T5M
1.00
F54T5
4400
129
0º =1.25 90º = 1.52
Length: 4.00
Width: 0.17
Height: 0.00
Test 12789 Test Date 1/8/03
Lumens % Lamp % Fixt.
1432
2431
4729
7272
1205
1384
1499
1507
8779
16.3
27.6
53.7
82.6
13.7
15.7
17.0
17.1
99.8
Energy Data
16.3
27.7
53.9
82.8
13.7
15.8
17.1
17.2
100.0
RCR
80
50 30
96 90
82 74
71 61
62 52
55 45
49 39
44 35
40 31
36 28
33 25
10
86
67
54
45
38
33
28
25
22
20
70
97
87
78
71
65
60
55
51
48
45
70
50 30
92 87
78 71
68 59
59 50
53 44
47 38
42 34
38 30
35 27
32 25
10
83
65
53
44
37
32
28
24
22
20
180
165
150
0.0
135
1800
900
50
84
72
62
55
48
43
39
36
33
30
68
Noncompliant
$3.53 based on
3000 hrs. and
$0.08 per KWH
AVG. LUMINANCE (Candela/Sq. M.)
Coefficients of Utilization (%)
70
102
91
82
75
68
63
58
54
50
47
99.8%
Luminaire Efficacy Rating (LER)
ANSI/IESNA RP-1-2004
Compliance:
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
Indoor Candela Plot
120
RC
RW
1
2
3
4
5
6
7
8
9
10
Total Luminaire Efficiency
Average Luminance Angle
Luminaire
0-30
0-40
0-60
0-90
90-120
90-130
90-150
90-180
0-180
50
30
80
66
55
47
41
36
32
28
26
23
10
77
61
50
41
35
30
26
23
21
19
0
0
63
50
40
34
28
24
21
19
17
15
105
90
0
30
40
45
50
55
60
65
70
75
80
85
22.5
45.0
27733 27733 27733
27106 28240 30159
26677 28681 32194
26281 29012 33534
25857 29527 35092
25252 30247 37064
24472 31215 39573
23335 32511 42699
31845 34712 47393
19755 38348 55167
17229 45579 70010
13985 65023 105526
67.5
90.0
27733
31694
34839
36758
39229
41921
45114
49404
55816
66420
84960
134586
27733
32261
35748
37922
40559
43356
46728
51351
58362
69600
89427
143668
75
900
60
1800
RCR = Room Cavity Ratio
RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
0
15
30
Horiz 0-180
0.0
45
45.0
90.0
Dimensional Data
16½" Center to Center
7/8" Knockouts
A
3"
1¼"
A
23/16"
22½" Overall Fixture Length
2"
275/16" Center to Center
7/8" Knockouts
A
3½"
A
345/16" Overall Fixture Length
1¼"
391/8" Center to Center
23/16"
7/8" Knockouts
A
A
2"
3½"
461/8" Overall Fixture Length
A: 7/8" Diameter knockout
NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification.
Page 2/2 Rev. 02/25/09
© 2009 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1668 / Website www.columbialighting.com
Striplights / CN
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
D418EB VOLTAGE=120/277 4D5
B24
MHDN13-50590
Date:
type:
firm name:
PROJECT:
d413eb, d418eb
or D432EB
REFLECTOR:
High purity aluminum reflector with iridescence
suppressed Alzak finish. Open trims retained with
5-finger grip clip. Wall wash trims retained with
integral leaf spring clips and can be rotated 360º.
Virtual Source Lighting® optical design provides
optimum efficiency and superior brightness control for
visual comfort. Wall wash reflectors feature patentpending VirtuWall Source™ optics for superior wall
washing.
BALLAST:
One (1) compact fluorescent Class ‘P’ electronic HPF,
universal voltage (120V through 277V) ballast. End
of life protection standard. Accessible from above or
below ceiling. Numerous dimming options available.
Ceiling Cutout: 5"
Maximum Ceiling Thickness: 11/4"
For conversion to millimeters,
multiply inches by 25.4
Not to Scale
One 13W, 18W, 26W or 32W Triple.
One 13W or 18W Quad 4-Pin
120V - 277V
HOUSING:
One-piece, 18-gauge post-painted CRS
platform. Large plaster frame provides superior
housing stability in the ceiling. Same housing
accommodates downlight and wall wash reflectors.
Prewired J-box with snap-on cover for easy access.
J-box is elevated and angled 15º to provide 95%
visibility from below the ceiling after installation for
easy maintenance.
LAMP:
One (1) 13W (GX24q-1 base), one (1) 18W (GX24q-2
base), one (1) 26W (GX24q-3 base), or one (1) 32W
(GX24q-3 base) 4-pin compact fluorescent lamp. Above
or below ceiling relamping capability. Lamp furnished
by others or as option below. Use only GE or Osram
Sylvania lamps in triple tube lamp applications except
wall wash. Use only Osram Sylvania with wall wash
applications
143⁄8"
97⁄8"*
SOCKET:
Injection molded vented lamp socket adjusts
to two positions, accommodating various lamp sizes and
ensuring precise lamp position.
Die cast aluminum heat sink socket cup with
tool-less, positive-positioning, Patented reflector-locking
spring (U.S. Patent No. 7,740,384).
41⁄2"
6"
INSTALLATION:
Universal adjustable mounting brackets
accommodate 1/2" EMT conduit; 11/2" or 3/4" lathing
channel (by others); or
Prescolite 24" bar hangers (B24 or B6).
LABELS:
UL, CSA listed for damp locations.
Approved for through wiring.
Thermally protected. Non-IC rated.
143/8"
LABELS:
UL Listed or UL/CSA listed with CDN option for damp
locations.
Approved for through wiring.
Thermally protected. Non-IC rated.
113⁄4"
161⁄4"
LABELS:
Specify lamp type T (Triple 4-pin) or Q4 (Quad 4-pin)
and temperature as shown below.
Catalog Number:
Housing
*maximum
Example: D432EBDM 4D5MFC LP32T30K B24
Housing Options
❑ CDN

Canadian electrical
code compliant ballast
disconnect

❑ CDN 347V3

Canadian electrical
code compliant ballast
disconnect


EMR3, 4, 7

Emergency battery pack
with remote test switch
and indicator light


FSDFA
1
Not available with 13W CFL lamp
Fuse
kit installed at
2
Not available with 18W CFL lamp
factory
3
347V not available with EM or
dimming options.
 RIF14
4
RIF1 and CP not offered in combination Radio interference filter 
with EM option
(single circuit)
5
For 26W CFL lamp specify D426EB
 MW266
and add desired Lutron dimming
Max Wattage label,
option suffix
6
26W

D432EB only
7
Remote Mount
 CP 4
8
Available for Osram Sylvania Quick Chicago Plenum
60+® Limited Warranty when used  DM
with Osram lamp(s). See 
Electronic analog
www.prescolite.com for details.
dimming ballast to 3%,
4-wire 0-10V, analog
(120V–277V)


D1
Notes:
4" Vertical CFL
Open & Wall Wash
Downlight
Featuring
Reflectors
APPLICATIONS:
–
The Architektur D4 offers a vertical, nominal 4"
specification-grade compact fluorescent downlight
and wall wash fixture that provides superior brightness
control. This luminaire is ideal for a wide variety of
low to medium ceiling height applications including
commercial, retail, and hospitality.
Type:
D413EB
4", (1) 13W Quad or
triple tube, multi-volt
electronic ballast
D418EB
4", (1) 18W Quad or
triple tube, multi-volt
electronic ballast
D432EB
4", (1) 26W or 32W
triple tube, multi-volt
electronic ballast
Housing Options
Reflector
ECDM1
Lutron EcoSystem or 3-wire line
voltage dimming ballast (120-277V).
Dims to 5%.


4D4
Open Alzak reflector
(13W or 18W triple)
4D5
Open Alzak reflector
(13W or 18W quad,
or 26W or 32W triple)
reflector COLOR


BLANK
Clear Alzak
CG
Champagne Gold
Alzak
WE
Wheat Alzak
LW
Light Wheat Alzak
PW
Pewter Alzak
BL
Black Alzak
HDM1, 2, 5
Lutron Hi-Lume® Dimming Ballast

to 1%, 3-wire line voltage
(specify supply voltage/wattage)

2DM1, 2, 5
Lutron Tu-Wire® Dimming Ballast Reflector FINISH

to 5%, 2-wire line voltage (120V
only)

 BLANK
7DM
Specular Alzak
Advance Mark 7™ Dimming
 SS
Ballast to 3%, 4-wire 0-10V,
REFLECTOR OPTIONS
Semi-specular Alzak
analog (120V–277V)
 MFC
SYL8
American Matte™ Alzak
Osram Sylvania Ballast
 TRG
(available only for standard EB
Trim ring gasket
(factory installed)
option)
1
 WT
XDM
™
Painted white
Advance Mark 10 Dimming
self-flange
Ballast to 5%, 2-wire line voltage
 WW
(specify supply voltage/wattage)
VirtuWall Source™
SMT
Wall wash
Philips Advance SmartMate®
ballast
WIH
wiHUBB® Enabled (see page 3)
In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.
A Division of Hubbell Lighting, Inc.
Web: www.prescolite.com
•
Tech Support: (888) 777-4832
Accessories




B24
Set of two (2) 24" bar
hangers for
T-bar ceilings
B6
Set of two (2) bar
hangers for ceiling joists
up to 24" centers
FSDFI
Fuse kit for field installation
SCA5_
Sloped ceiling adapter
for 4" housing (specify
degree of slope and type
of ceiling.)
LAMP ACCESSORIES

LP_________________
-wattage= 13, 18, 26, 32
-type= T (Triple 4-pin) or
Q4 (Quad 4-pin [18W
only])
-temp= 27K, 30K, 35K,
41K (Kelvin)
*Example: LP32T30K
ARCH-CFL-066
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
D418EB VOLTAGE=120/277 4D5
B24
MHDN13-50590
Architektū
¯r D4 - 4" Vertical Open &
Wall Wash Downlight
18W Triple
Total System Watts
Input Current (Amps)
Input Frequency in Hz
Power Factor
Ballast Factor
Total Harmonic Distortion
Minimum Starting Temp
D1
Notes:
PHOTOMETRIC DATA
Ballast Data
Type:
26W Triple
32W Triple
120V
277V
347V
120V
277V
347V
120V
277V
347V
20W
0.17
50/60
>97%
20W
0.08
50/60
>97%
21W
0.06
50/60
>98%
29W
0.24
50/60
>98%
29W
0.11
50/60
>98%
31W
0.09
50/60
>98%
36W
0.31
50/60
>98%
36W
0.13
50/60
>98%
36W
0.11
50/60
>98%
>105%
>105%
>100%
>110%
>110%
>102%
>98%
>98%
>98%
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
LAMP Data
D432EB-4D5 with Clear Alzak® Reflector
Lamp: One 32W Triple
Spacing Criteria: 1.1
Efficiency: 38.6%
CANDLEPOWER
DISTRIBUTION
CANDLEPOWER
SUMMARY
90º
Angle
Mean CP
Lumens
0
5
15
25
35
45
55
65
75
85
90
656
678
639
546
362
154
4
1
1
0
0
65
182
250
226
118
7
1
1
0
75º
250
60º
450
45º
750
0º
15º
Rated Watts
18W triple
26W triple
32W triple
Rated Lumens
Efficacy (LPW)
Rated Life
CRI
1200
67
10,000 hours
1800
69
10,000 hours
2400
75
10,000 hours
82
82
82
Minimum Starting Temp.
0° F
0° F
0° F
D432EB-4D5WW with Clear Alzak® Reflector
Lamp: One 32W Triple
Spacing Criteria: 1.0
Efficiency: 27.7%
CANDLEPOWER
SUMMARY
CANDLEPOWER
DISTRIBUTION
90º
30º
Test No. 1103
75º
Luminance Data in Candela/Sq. Meter
190
60º
Average
0°
21218
679
231
376
0
Angle in
Vertical
45°
55°
65°
75°
85°
380
45º
570
0º
Average initial footcandles
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
RCR3
RCR7
15
12
9
7
6
5
4
4
3
13
10
8
6
5
4
4
3
3
9
7
6
5
4
3
3
2
2
1
2
3
4
5
6
7
8
9
10
Angle in
Vertical
45°
55°
65°
75°
85°
Zonal Cavity Method
50%
30%
20% Effective Floor Cavity Reflectance
% Wall Reflectance
50 30 10 50 30 10
.44
.41
.39
.37
.35
.33
.31
.29
.28
.26
.39
.36
.34
.31
.29
.27
.26
.24
.23
.21
D432EB-4D5
.41
.36
.33
.30
.27
.25
.23
.21
.19
.18
.43
.40
.38
.36
.34
.32
.30
.29
.27
.26
.42
.39
.36
.33
.31
.29
.27
.25
.23
.22
.41
.37
.34
.31
.28
.26
.24
.22
.21
.20
.40
.36
.32
.29
.27
.25
.23
.21
.19
.18
.40
.37
.35
.32
.30
.28
.26
.24
.23
.22
.39
.36
.33
.30
.28
.26
.24
.22
.21
.19
.39
.35
.32
.29
.27
.24
.22
.21
.19
.18
.38
.35
.32
.30
.28
.26
.24
.22
.21
.19
.38
.34
.31
.29
.26
.24
.22
.21
.19
.18
.37
.35
.33
.31
.29
.27
.25
.24
.22
.21
.37
.34
.32
.29
.27
.25
.23
.22
.20
.19
.36
.34
.31
.28
.26
.24
.22
.21
.19
.18
Average
0°
31998
22044
19841
16970
10690
Average
90°
11670
2088
945
514
0
Average
180°
1129
1160
315
1028
0
MULTIPLE UNITS
1’
2’
3’
4’ 10%
70 50 30 10 70 50 30 10 50 30 10
.42
.38
.34
.31
.29
.26
.24
.23
.21
.20
30º
% Effective Ceiling Cavity Reflectance
.43
.39
.36
.34
.31
.29
.27
.25
.23
.22
519
514
447
326
202
6
5
1
2
0
0
Luminance Data in Candela/Sq. Meter
DISTANCE FROM CEILING IN FEET
Room Cavity
Ratio
COEFFICIENTS OF UTILIZATION
70%
180°
519
521
544
465
332
170
95
63
33
7
1
Test No. 1501
RCR1
80%
0°
0
5
15
25
35
45
55
65
75
85
90
0
180
Multiple Units (Square Array)
Ceiling 80% Wall 50% Floor 20%
32W Triple
SPACING
15º
Angle
UNITS ON 3’ CENTER
UNITS ON
4’ CENTER
3’ DISTANCE FIXTURE MOUNTED OUT FROM WALLS
FOOTCANDLE DISTRIBUTION ON WALL SURFACE
▼
▼
▼
▼
▼
14 5
3 5
1 7
0 7
0 3
25 7
4 6
2 5
1 2
0 6
▼
▼
▼
6 25 86 2
▼
▼
▼
5 23 75 2
8 48 18 4
6 95 56 9
3 6 95 53 01 50 6
10 4 9 510 4
8 3 6 5 8 3
4 7 36 34 01 90 9
11 611 7
11 6
9 28 49 2
5 6 15 64 12 61 2
11 911 611 9
8 7 8 7 8 7
6 4 64 43 52 41 6
10 310 510 3
8 0 7 78 0
73 4
3 3
2 7
2 1
1 5
8 99 18 9
6 86 76 8
2 5
2 2
1 7
1 4
82 6
7 67 87 6
5 85 95 8
92 0
2 0
1 8
1 5
1 2
6 56 76 5
4 95 04 9
D432EB-4D5WW
Test No. 1103
Notes
Refer to www.prescolite.com for additional photometric tests (IES Files).
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd., Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2011 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-066 • 8/31/11
Test No. 1501
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
D418EB VOLTAGE=120/277 4D5
B24
Notes:
Type:
D1
MHDN13-50590
PHOTOMETRIC DATA
wiHUBB®
Fixture comes with a pre-installed In-Fixture Module (1 relay, 0-10V) compatible with the HBA wiHUBB system. Actual
dimming requires the selection of 0-10V dimming ballast as well. Consult factory for compatibility with EM fixtures.
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd., Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2011 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-066 • 8/31/11
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
D418EB VOLTAGE=120/277 4D5
B24
Notes:
Type:
D1
MHDN13-50590
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
D418EBDM VOLTAGE=SPECIFY
4D5 B24
Type:
D1D
Notes:
MHDN13-50590
Please Note: Lamps must be operated at full capacity for
100 hours before being dimmed to reach optimum performance.
4" Vertical CFL
Open & Wall Wash
Downlight
Date:
type:
firm name:
PROJECT:
d413eb, d418eb
or D432EB
Featuring
Reflectors
APPLICATIONS:
–
The Architektur D4 offers a vertical, nominal 4"
specification-grade compact fluorescent downlight
and wall wash fixture that provides superior brightness
control. This luminaire is ideal for a wide variety of
low to medium ceiling height applications including
commercial, retail, and hospitality.
One 13W, 18W, 26W or 32W Triple.
One 13W or 18W Quad 4-Pin
120V - 277V
Voltage=Specify
HOUSING:
One-piece, 18-gauge post-painted CRS
platform. Large plaster frame provides superior
housing stability in the ceiling. Same housing
accommodates downlight and wall wash reflectors.
Prewired J-box with snap-on cover for easy access.
J-box is elevated and angled 15º to provide 95%
visibility from below the ceiling after installation for
easy maintenance.
REFLECTOR:
High purity aluminum reflector with iridescence
suppressed Alzak finish. Open trims retained with
5-finger grip clip. Wall wash trims retained with
integral leaf spring clips and can be rotated 360º.
Virtual Source Lighting® optical design provides
optimum efficiency and superior brightness control for
visual comfort. Wall wash reflectors feature patentpending VirtuWall Source™ optics for superior wall
washing.
BALLAST:
One (1) compact fluorescent Class ‘P’ electronic HPF,
universal voltage (120V through 277V) ballast. End
of life protection standard. Accessible from above or
below ceiling. Numerous dimming options available.
Ceiling Cutout: 5"
Maximum Ceiling Thickness: 11/4"
For conversion to millimeters,
multiply inches by 25.4
Not to Scale
LAMP:
One (1) 13W (GX24q-1 base), one (1) 18W (GX24q-2
base), one (1) 26W (GX24q-3 base), or one (1) 32W
(GX24q-3 base) 4-pin compact fluorescent lamp. Above
or below ceiling relamping capability. Lamp furnished
by others or as option below. Use only GE or Osram
Sylvania lamps in triple tube lamp applications except
wall wash. Use only Osram Sylvania with wall wash
applications
143⁄8"
97⁄8"*
SOCKET:
Injection molded vented lamp socket adjusts
to two positions, accommodating various lamp sizes and
ensuring precise lamp position.
Die cast aluminum heat sink socket cup with
tool-less, positive-positioning, Patented reflector-locking
spring (U.S. Patent No. 7,740,384).
41⁄2"
6"
INSTALLATION:
Universal adjustable mounting brackets
accommodate 1/2" EMT conduit; 11/2" or 3/4" lathing
channel (by others); or
Prescolite 24" bar hangers (B24 or B6).
LABELS:
UL, CSA listed for damp locations.
Approved for through wiring.
Thermally protected. Non-IC rated.
143/8"
LABELS:
UL Listed or UL/CSA listed with CDN option for damp
locations.
Approved for through wiring.
Thermally protected. Non-IC rated.
113⁄4"
161⁄4"
LABELS:
Specify lamp type T (Triple 4-pin) or Q4 (Quad 4-pin)
and temperature as shown below.
Catalog Number:
Housing
Example: D432EBDM 4D5MFC LP32T30K B24
Housing Options
❑ CDN

Canadian electrical
code compliant ballast
disconnect

❑ CDN 347V3

Canadian electrical
code compliant ballast
disconnect


EMR3, 4, 7

Emergency battery pack
with remote test switch
and indicator light


FSDFA
1
Not available with 13W CFL lamp
Fuse
kit installed at
2
Not available with 18W CFL lamp
factory
3
347V not available with EM or
dimming options.
 RIF14
4
RIF1 and CP not offered in combination Radio interference filter 
with EM option
(single circuit)
5
For 26W CFL lamp specify D426EB
 MW266
and add desired Lutron dimming
Max Wattage label,
option suffix
6
26W

D432EB only
7
Remote Mount
 CP 4
8
Available for Osram Sylvania Quick Chicago Plenum
60+® Limited Warranty when used  DM
with Osram lamp(s). See 
Electronic analog
www.prescolite.com for details.
dimming ballast to 3%,
4-wire 0-10V, analog
(120V–277V)


*maximum
D413EB
4", (1) 13W Quad or
triple tube, multi-volt
electronic ballast
D418EB
4", (1) 18W Quad or
triple tube, multi-volt
electronic ballast
D432EB
4", (1) 26W or 32W
triple tube, multi-volt
electronic ballast
Housing Options
Reflector
ECDM1
Lutron EcoSystem or 3-wire line
voltage dimming ballast (120-277V).
Dims to 5%.


4D4
Open Alzak reflector
(13W or 18W triple)
4D5
Open Alzak reflector
(13W or 18W quad,
or 26W or 32W triple)
reflector COLOR


BLANK
Clear Alzak
CG
Champagne Gold
Alzak
WE
Wheat Alzak
LW
Light Wheat Alzak
PW
Pewter Alzak
BL
Black Alzak
HDM1, 2, 5
Lutron Hi-Lume® Dimming Ballast

to 1%, 3-wire line voltage
(specify supply voltage/wattage)

2DM1, 2, 5
Lutron Tu-Wire® Dimming Ballast Reflector FINISH

to 5%, 2-wire line voltage (120V
only)

 BLANK
7DM
Specular Alzak
Advance Mark 7™ Dimming
 SS
Ballast to 3%, 4-wire 0-10V,
REFLECTOR OPTIONS
Semi-specular Alzak
analog (120V–277V)
 MFC
SYL8
American Matte™ Alzak
Osram Sylvania Ballast
 TRG
(available only for standard EB
Trim ring gasket
(factory installed)
option)
1
 WT
XDM
™
Painted white
Advance Mark 10 Dimming
self-flange
Ballast to 5%, 2-wire line voltage
 WW
(specify supply voltage/wattage)
VirtuWall Source™
SMT
Wall wash
Philips Advance SmartMate®
ballast
WIH
wiHUBB® Enabled (see page 3)
In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.
A Division of Hubbell Lighting, Inc.
Web: www.prescolite.com
•
Tech Support: (888) 777-4832
Accessories




B24
Set of two (2) 24" bar
hangers for
T-bar ceilings
B6
Set of two (2) bar
hangers for ceiling joists
up to 24" centers
FSDFI
Fuse kit for field installation
SCA5_
Sloped ceiling adapter
for 4" housing (specify
degree of slope and type
of ceiling.)
LAMP ACCESSORIES

LP_________________
-wattage= 13, 18, 26, 32
-type= T (Triple 4-pin) or
Q4 (Quad 4-pin [18W
only])
-temp= 27K, 30K, 35K,
41K (Kelvin)
*Example: LP32T30K
ARCH-CFL-066
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
D418EBDM VOLTAGE=SPECIFY
4D5 B24
MHDN13-50590
Architektū
¯r D4 - 4" Vertical Open &
Wall Wash Downlight
18W Triple
Total System Watts
Input Current (Amps)
Input Frequency in Hz
Power Factor
Ballast Factor
Total Harmonic Distortion
Minimum Starting Temp
D1D
Notes:
PHOTOMETRIC DATA
Ballast Data
Type:
26W Triple
32W Triple
120V
277V
347V
120V
277V
347V
120V
277V
347V
20W
0.17
50/60
>97%
20W
0.08
50/60
>97%
21W
0.06
50/60
>98%
29W
0.24
50/60
>98%
29W
0.11
50/60
>98%
31W
0.09
50/60
>98%
36W
0.31
50/60
>98%
36W
0.13
50/60
>98%
36W
0.11
50/60
>98%
>105%
>105%
>100%
>110%
>110%
>102%
>98%
>98%
>98%
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
<10%
–18°C (0°F)
LAMP Data
D432EB-4D5 with Clear Alzak® Reflector
Lamp: One 32W Triple
Spacing Criteria: 1.1
Efficiency: 38.6%
CANDLEPOWER
DISTRIBUTION
CANDLEPOWER
SUMMARY
90º
Angle
Mean CP
Lumens
0
5
15
25
35
45
55
65
75
85
90
656
678
639
546
362
154
4
1
1
0
0
65
182
250
226
118
7
1
1
0
75º
250
60º
450
45º
750
0º
15º
Rated Watts
18W triple
26W triple
32W triple
Rated Lumens
Efficacy (LPW)
Rated Life
CRI
1200
67
10,000 hours
1800
69
10,000 hours
2400
75
10,000 hours
82
82
82
Minimum Starting Temp.
0° F
0° F
0° F
D432EB-4D5WW with Clear Alzak® Reflector
Lamp: One 32W Triple
Spacing Criteria: 1.0
Efficiency: 27.7%
CANDLEPOWER
SUMMARY
CANDLEPOWER
DISTRIBUTION
90º
30º
Test No. 1103
75º
Luminance Data in Candela/Sq. Meter
190
60º
Average
0°
21218
679
231
376
0
Angle in
Vertical
45°
55°
65°
75°
85°
380
45º
570
0º
Average initial footcandles
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
RCR3
RCR7
15
12
9
7
6
5
4
4
3
13
10
8
6
5
4
4
3
3
9
7
6
5
4
3
3
2
2
1
2
3
4
5
6
7
8
9
10
Angle in
Vertical
45°
55°
65°
75°
85°
Zonal Cavity Method
50%
30%
20% Effective Floor Cavity Reflectance
% Wall Reflectance
50 30 10 50 30 10
.44
.41
.39
.37
.35
.33
.31
.29
.28
.26
.39
.36
.34
.31
.29
.27
.26
.24
.23
.21
D432EB-4D5
.41
.36
.33
.30
.27
.25
.23
.21
.19
.18
.43
.40
.38
.36
.34
.32
.30
.29
.27
.26
.42
.39
.36
.33
.31
.29
.27
.25
.23
.22
.41
.37
.34
.31
.28
.26
.24
.22
.21
.20
.40
.36
.32
.29
.27
.25
.23
.21
.19
.18
.40
.37
.35
.32
.30
.28
.26
.24
.23
.22
.39
.36
.33
.30
.28
.26
.24
.22
.21
.19
.39
.35
.32
.29
.27
.24
.22
.21
.19
.18
.38
.35
.32
.30
.28
.26
.24
.22
.21
.19
.38
.34
.31
.29
.26
.24
.22
.21
.19
.18
.37
.35
.33
.31
.29
.27
.25
.24
.22
.21
.37
.34
.32
.29
.27
.25
.23
.22
.20
.19
.36
.34
.31
.28
.26
.24
.22
.21
.19
.18
Average
0°
31998
22044
19841
16970
10690
Average
90°
11670
2088
945
514
0
Average
180°
1129
1160
315
1028
0
MULTIPLE UNITS
1’
2’
3’
4’ 10%
70 50 30 10 70 50 30 10 50 30 10
.42
.38
.34
.31
.29
.26
.24
.23
.21
.20
30º
% Effective Ceiling Cavity Reflectance
.43
.39
.36
.34
.31
.29
.27
.25
.23
.22
519
514
447
326
202
6
5
1
2
0
0
Luminance Data in Candela/Sq. Meter
DISTANCE FROM CEILING IN FEET
Room Cavity
Ratio
COEFFICIENTS OF UTILIZATION
70%
180°
519
521
544
465
332
170
95
63
33
7
1
Test No. 1501
RCR1
80%
0°
0
5
15
25
35
45
55
65
75
85
90
0
180
Multiple Units (Square Array)
Ceiling 80% Wall 50% Floor 20%
32W Triple
SPACING
15º
Angle
UNITS ON 3’ CENTER
UNITS ON
4’ CENTER
3’ DISTANCE FIXTURE MOUNTED OUT FROM WALLS
FOOTCANDLE DISTRIBUTION ON WALL SURFACE
▼
▼
▼
▼
▼
14 5
3 5
1 7
0 7
0 3
25 7
4 6
2 5
1 2
0 6
▼
▼
▼
6 25 86 2
▼
▼
▼
5 23 75 2
8 48 18 4
6 95 56 9
3 6 95 53 01 50 6
10 4 9 510 4
8 3 6 5 8 3
4 7 36 34 01 90 9
11 611 7
11 6
9 28 49 2
5 6 15 64 12 61 2
11 911 611 9
8 7 8 7 8 7
6 4 64 43 52 41 6
10 310 510 3
8 0 7 78 0
73 4
3 3
2 7
2 1
1 5
8 99 18 9
6 86 76 8
2 5
2 2
1 7
1 4
82 6
7 67 87 6
5 85 95 8
92 0
2 0
1 8
1 5
1 2
6 56 76 5
4 95 04 9
D432EB-4D5WW
Test No. 1103
Notes
Refer to www.prescolite.com for additional photometric tests (IES Files).
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd., Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2011 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-066 • 8/31/11
Test No. 1501
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
D418EBDM VOLTAGE=SPECIFY
4D5 B24
Notes:
Type:
D1D
MHDN13-50590
PHOTOMETRIC DATA
wiHUBB®
Fixture comes with a pre-installed In-Fixture Module (1 relay, 0-10V) compatible with the HBA wiHUBB system. Actual
dimming requires the selection of 0-10V dimming ballast as well. Consult factory for compatibility with EM fixtures.
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd., Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2011 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-066 • 8/31/11
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
D418EBDM VOLTAGE=SPECIFY
4D5 B24
Notes:
Type:
D1D
MHDN13-50590
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
CFR6126EB VOLTAGE=120/277
ST372A1 B24 SR6080NF
Type:
D2
Notes:
MHDN13-50590
Date:type:
6" Horizontal Quad
Open Downlight
firm name:
CFR6126EB
PROJECT:
One 26W Quad Tube 4-Pin Lamp
Non-IC Rated
120V, 208V, 240V, 277V, or 347V
Ceiling Cutout: 6-1/4"
Maximum Ceiling Thickness: 1-1/4"
Not to Scale
Voltage=120/277
17-1/2"
W/ EM
Featuring
14-3/8"
W/O EM
Reflectors
APPLICATIONS:
The CFR6126EB offers a horizontally lamped
compact fluorescent downlight and wall wash
fixture that provides superior brightness and glare
control. This luminaire is ideal for a wide variety
of low to medium height ceiling applications
including commercial, retail, and hospitality.
The CFR6126EB is compatible with the Signos6
family of architectural elements.
HOUSING:
One-piece galvanneal18-gauge cold rolled
steel platform. Prewired J-box with snap-on
cover for easy access. Vented at lamp tip and
socket for maximum light output. Same housing
accommodates downlight and wall wash
downlight reflectors.
REFLECTOR:
High purity aluminum Alzak Virtual Source®
iridescence suppressed reflector. Self-trim
standard. Painted white self-trim available.
Baffled units standard with painted white self-trim.
LAMP:
One (1) 26W quad tube with G24q-3 base.
Lamp furnished by others or as option below.
SOCKET:
One (1) injection molded socket (vented).
INSTALLATION:
Universal adjustable mounting brackets
accommodate 11/2" or 3/4" lathing channel
or 1/2" EMT (by others), or Prescolite 24" bar
hangers (B24 or B6).
15"
LABELS:
UL Listed or UL/CSA listed with CDN option for
damp locations. Approved for through wiring.
Non-type I.C. and NYC approved.
lamp included option:
Specify lamp type Q4 (Quad 4-pin) and
temperature as shown below.
6-1/8"
W/O EM
BALLAST:
One (1) 26W compact fluorescent Class ‘P’
electronic multi-volt (120V through 277V) ballast
for long life and quite operation. HPF and EOL
protection standard. Accessible from below
ceiling. 347V available.
7-1/8"
W/EM
1-1/4"
5-3/4"
7"
Catalog Number:
Housing
example: CFr612ebdm st372aimfc lp26q430k b6
Housing Options
Housing Options
❑CFR6126EB
6", (1) 26W Quad
tube, multi-volt
electronic ballast
❑CDN
ECDM
Canadian electrical code
Lutron EcoSystem or 3-wire
compliant ballast
line voltage dimming ballast
disconnect
(120-277V). Dims to 5%.
❑ CDN 347V1
7DM
Canadian electrical code Advance Mark 7 Dimming
compliant ballast Ballast to 5%, 4-wire, 0-10V,
disconnect
analog (120V–277V)
❑CP 2
XDM
C
hicago Plenum. Fixture
Advance Mark 10 Dimming
construction and/or
Ballast to 5%, 2-wire, line
specifications may vary.
voltage (specify supply
Refer to Chicago Plenum
voltage/wattage)
specification sheets on
❑EM3
www.prescolite.com for
Emergency battery pack
details.
with integral test switch and
DM
indicator light
Electronic Analog
❑FSDFA
Dimming Ballast to 3%,
Fuse kit installed at factory
4-wire, 0-10V, analog
❑RIF1
(120V–277V)
Radio interference filter
(single circuit)
SYL4
1
Dimming options not available in 347V.
Osram Sylvania Ballast
2
Top access required to service ballast for Chicago Plenum.
(available only for standard
3
Not valid with lensed trim.
EB option)
4
®
Available for Osram Sylvania Quick 60+ Limited Warranty Reflectors
❑ST372A1
6" Alzak reflector
Reflector finish
❑Blank
Specular
❑SS
Semi-Specular
❑MFC
American MatteTM
Reflector color
❑Blank
Clear Alzak
❑CG
Champagne Gold
Alzak
❑BL
Black Alzak
❑WE
Wheat Alzak
❑LW
when used with Osram lamp(s). See www.prescolite.com for SMT
Philips Advance SmartMate®
Light Wheat Alzak
details.
5
ballast
Not available for wall wash.
❑PW
WIH
Pewter Alzak
wiHUBB® Enabled (see
Reflector options
❑BB5
Painted black baffle
❑WB5
Painted white baffle
❑WT
Painted white
self-flange
❑WW
Wall wash reflector
❑TRG
Trim Ring Gasket
(factory installed)
Painted Options*
❑WC 5-White Cone
❑BC 5-Black Cone
*All painted options
come standard with
an upper specular
clear Alzak reflector.
Accessories
❑B24
Set of two (2) 24" bar
hangers for
T-bar ceilings
❑B6
Set of two (2) bar hangers
for ceiling joists up to 24"
centers
❑FSDFI
Fuse kit for field installation
❑SCA6D_
Sloped ceiling adapter
(see note on back page)
❑Signos63,5
Architectural glass
elements
Refer to specification
sheets ARCH-SIG001through -004
LAMP ACCESSORIES
❑LP_____________
-wattage= 26
-type= Q4 (Quad 4-pin)
-temp= 27K, 30K, 35K,
41K (Kelvin)
*Example: LP26Q441K
page 3)
In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.
A Division of Hubbell Lighting, Inc.
Web: www.prescolite.com • Tech Support: (888) 777-4832
ARCH-CFL-004
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
CFR6126EB VOLTAGE=120/277
ST372A1 B24 SR6080NF
Notes:
PHOTOMETRIC DATA
Type:
D2
MHDN13-50590
Architektū
¯r - 6" Horizontal Quad
Open Tube Downlights - CFR6126EB
Ballast Data
Lamp Data
120V 277V 347V
Total System Watts
Input Current (Amps)
Input Frequency
Power Factor
Ballast Factor
Total Harmonic Distortion
Minimum Starting Temp.
20W
0.17
50Hz or 60Hz
>97%
>98%
<10%
-18° C (0° F)
29W
0.11
50Hz or 60Hz
>97%
>98%
<10%
-18° C (0° F)
31W
0.09
50Hz or 60Hz
>97%
1
<10%
-18° C (0° F)
26W Quad
Rated Watts
26W Quad
Rated Lumens
1800
Efficacy (LPW)
69
Rated Life
10,000 hours
CRI82
Minimum Starting Temp. 0° F
Notes
Denotes a Virtual Source reflector.
Refer to www.prescolite.com for additional photometric tests
(IES Files).
When ordering a sloped ceiling adapter, specify the degree of
slope in 5° increments, max. of 35°. For a more precise degree
or wet ceiling applications, please contact factory. Sloped ceiling adapter and housing must be installed at the same time.
Note: Use of horizontally-lamped open downlights with amalgam-based CFL lamps in air-handling plenums is
not recommended because cool air flow over the lamps will result in reduced light output. Prescolite recommends
vertical lamp downlights or use of the regressed lensed trim option for horizontal downlights in these applications
to reduce this effect. Refer to Prescolite White Paper WP0003 at www.prescolite.com for more information.
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd. • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2011 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-004 • 8/29/11
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
CFR6126EB VOLTAGE=120/277
ST372A1 B24 SR6080NF
Notes:
Type:
D2
MHDN13-50590
PHOTOMETRIC DATA
wiHUBB®
Fixture comes with a pre-installed In-Fixture Module (1 relay, 0-10V) compatible with the HBA wiHUBB system. Actual
dimming requires the selection of 0-10V dimming ballast as well. Consult factory for compatibility with EM fixtures.
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd. • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2011 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-004 • 8/29/11
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
CFR6126EB VOLTAGE=120/277
ST372A1 B24 SR6080NF
Type:
D2
Notes:
MHDN13-50590
Round Architectural
Elements
6" SR SERIES
DATE:type:
firm name:
PROJECT:
One and Two Level
Architectural Elements
Designed for compact fluorescent,
incandescent, and metal halide
recessed downlights.
Reflectors
Featuring
PRODUCT ATTRIBUTES:
Each element of Signos is made from
premium materials and is created by hand.
The imported glass elements are cast from
custom molds and are engineered and
manufactured especially for Prescolite by
experienced craftsmen. The frosted glass
elements are subjected to an elaborate
bead blasted process to create a perfectly
uniform visual and luminous distribution.
The aluminum foundation flange is hand
spun and soft polished, then clear coated
or painted to ensure a natural, long-lasting,
durable finish. In the final steps of the
process, each Signos element is inspected
for perfection and assembled by hand with
protective gloves to reveal a pristine, high
quality highly aesthetic finished product.
APPLICATIONS:
Signos6 elements are ideal for architectural
applications with 8', 9' and 10' ceilings.
By combing these elements – cut glass,
aluminum and acrylic accents – everyday
downlights can be transformed into architectural statements that complement the hard
edges of today’s trend setting designs. The
intentional open design of Signos allows
the fixture to meet the ambient illumination
requirements while providing a luminous
focal point. There is no need for a separate
decorative fixture; Signos combines two
systems into one, reducing energy requirements as well as initial installation costs.
REFLECTOR:
High purity aluminum Alzak processed reflector
featuring Virtual Source®
optical design
for optimum efficiency and superior brightness
control. Self-trim (ST) standard. Refer to specification sheet ARCH-OPT-1 for reflector finish
options.
SR6090
Overall Height: 1.9"
Flange Diameter: 9.1"
INSTALLATION:
Installation of Signos6 architectural elements
is fast, easy, and secure. Signos trims are attached directly to the housing frame completely
separate from the reflector via a unique sky
twist bracket. The trim safety wire attaches to
the sky twist bracket to keep the trim captive
and allows it to swing away from the aperture for
quick relamping and maintenance. The sky twist
lock design allows for quick replacement of trim
to the ceiling plane.
SR6075
Overall Height: 2.4"
Flange Diameter: 9.1"
HOUSING:
Signos6 round architectural elements are designed to attach to 6" Prescolite modular downlight frames, including compact fluorescent,
incandescent, and metal halide series, CFQ6,
CFT6, CFR6, CFCB6, 79X, INC600, 79M and
RHD601 with electronic ballast. (Not available
with 79M150EB housing. Signos elements can
be attached after the downlight has been installed
and the ceiling is finished. Refer to luminaire
specification options below.
LABELS:
SR6055NF
Overall Height: 2.7"
Small Flange Diameter: 8"
Dimensions
Aperture: Nominal 6"
UL, CSA listed
Max. Ceiling Thickness: N/A
Catalog Number:Example: cft632eb-stf602mfc-b6-sr6060
Specification Information – Signos 6" Round*
elements
❑ SR6010
❑ SR6030***
❑ SR6045
❑ SR6055
❑ SR6060
❑ SR6070
❑ SR6075
❑ SR6080
❑ SR6090
❑ SR6095
❑ SR6100
❑ SR6105
❑ SR6110
❑ SR6115
❑ SR6120
housings and reflectors
❑ CFQ613EB-STF602
❑ CFR613UQEB-ST372A
❑ CFQ618EB-STF602
❑ CFR618EB-ST372A
❑ CFQ626EB-STF602
❑ CFR6126EB-ST372A1
❑ CFR626EB-ST372A
housings and reflectors
❑ CFT632EB-STF602
❑ CFT632HEB-STF602H
❑ 79X-ST832
❑ INC600-STI602
❑ 79M2-ST832
❑ 79M7-ST832
❑ 79M5-ST832
❑ RHD601-STH6021
elements
A D v s on of Hubbe L ght ng, Inc.
**
*Refer to www.prescolite.com for additional reflector options and accessories. Not compatible with regressed lens options.
**All housings and reflectors shown
feature Virtual Source technology
except 79X, 79M2, 79M7, and
79M5.
***SR6030 cannot be used with INC600
1
For use with electronic ballast only
In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.
Web: www.prescolite.com
•
Tech Support: (888) 777-4832
ARCH-SIG-001
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
CFR6126EB VOLTAGE=120/277
ST372A1 B24 SR6080NF
Type:
D2
Notes:
MHDN13-50590
SIGNOS 6" ROUND ARCHITECTURAL ELEMENTS
fixed assemblies
Refer to specification sheets ARCH-SIG-003 for custom options. Visit www.prescolite.com for IES formatted photometrics for various recessed housings and Signos
combinations. All round fixed assemblies are shipped with a standard foundation flange (9.1"), unless otherwise noted. A small foundation flange (8") can be specified as an alternative. Add NF for the small foundation flange at the end of the catalog number.
SR6030
Standard brushed and painted
brass foundation flange and
frosted glass dome.
OH1: 4.1", FD2: 9.1" dia.
SR6045NF
Small brushed aluminum foundation flange and two frosted
glass rings.
OH1: 2.6", SFD3: 8" dia.
SR6055NF
Small brushed aluminum
foundation flange, frosted
glass ring, cobalt blue acrylic
disk with frosted glass ring,
and architectural armature.
OH1: 2.7", SFD3: 8" dia.
SR6060
Standard brushed and painted brass foundation flange,
frosted glass ring, and cobalt
blue acrylic ring with frosted
glass ring.
OH1: 2.7", FD2: 9.1" dia.
SR6070
SR6075
Standard brushed aluminum
Standard white foundation
foundation flange, cobalt blue
flange, cobalt acrylic ring with
acrylic ring, and frosted glass ring frosted glass ring, brass finials
1
with cobalt blue acrylic disk. OH : and armature with cobalt blue
glass cone. OH1: 2.4", FD2:
2.6", FD2: 9.1" dia.
9.1" dia
SR6080NF
Small brushed aluminum
foundation flange with two
brushed aluminum rings.
OH1: 2.2", SFD3: 8" dia.
SR6090
Standard white foundation
flange, frosted glass ring with
ruby red acrylic ring, and
white architectural armature.
OH1: 1.9", FD2: 9.1" dia.
SR6095
Standard brushed aluminum
foundation flange, and
perforated aluminum ring
with aluminum caming rings.
OH1: 1.5", FD2: 9.1" dia.
SR6100NF
Small white foundation
flange, and white perforated
aluminum ring with white
caming rings.
OH1: 1.5", SFD3: 8" dia.
SR6110NF
Small brushed aluminum foundation flange and
clear glass disc with
frosted center.
OH1: 1.7", SFD3: 8" dia.
SR6115NF
SR6120
Standard brushed aluminum
foundation flange and clear
glass ring.
OH1: 1.7", FD2: 9.1" dia.
SR6010
Standard brushed aluminum
foundation flange with
glass ring.
OH1: 1.7", FD2: 9.1" dia.
SR6105
Standard brushed aluminum
foundation flange, clear glass
disc with frosted center and a
aluminum caming ring.
OH1: 1.7", FD2: 9.1" dia.
1
2
6" Luminaire Matrix*
3
CFL-Quad Tube
Vertical Lamp
CFL-Triple Tube
18W
26W
Housing: CFQ613EB
Reflector: STF602 – Clear
STF602MFC –
American Matte
Housing: CFQ618EB
Reflector: STF602 – Clear
STF602MFC –
American Matte
Housing: CFQ626EB
Reflector: STF602 – Clear
STF602MFC –
American Matte
Housing: CFT632EB
Reflector: STF602 – Clear
STF602MFC –
American Matte
Housing: CFR612EB
Reflector: ST372A1 – Clear
Housing: CFT632HEB
Reflector: STF602H – Clear
STF602HMFC –
American Matte
Horizontal Single Lamp
Horizontal Two Lamp
Housing: CFR613UQEB
Reflector: ST372A – Clear
ST372AMFC –
Am. Matte
Housing: CFR618EB
Reflector: ST372A – Clear
ST372AMFC –
American Matte
HID
Incandescent
26W26W/32W/42W 75W PAR-30L 150W A-21
150W PAR-38 100W A-19
13W
Overall Height
Flange Diameter
Small Flange Diameter
Housing: 79X
Housing: INC600
Reflector: ST832 – Reflector: STI602 – Clear
Clear
STI602MFC
– Am. Matte
100W
PAR-38
CDM
50, 70, OR
100W
ED-17
Housing: 79M2 Housing: RHD601
79M7 Reflector: STH602 79M5 – Clear
Reflector: ST832 STH602MFC –
– Clear
Am. Matte
Housing: CFR626EB
Reflector: ST372A – Clear
ST372AMFC –
American Matte
* Refer to www.prescolite.com for additional reflector options. Not compatible with regressed lens option.
Installation Features
Sky twist mounting brackets snap onto Prescolite plaster flange for easy trim mounting. Brackets are equipped with safety wire to secure trim to housing. Trim safety
wire allows product to be relamped without having to remove trim from ceiling. Mounting brackets can be installed from below ceiling.
Sky Twist
Mounting Brackets
1 Brackets snap onto
plaster flange for
easy trim mounting
2 Safety wire
keeps trim secure
to housing
3 Twist lock for
fast relamping
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd. • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2010 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-SIG-001 • 1/18/10
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
CFR6126EB VOLTAGE=120/277
ST372A1 B24 SR6080NF
Notes:
Type:
D2
MHDN13-50590
Catalog Number:
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Type:
CFR6126EBDM VOLTAGE=SPECIFY
ST372A1 B24 SR6080NF
D2D
Notes:
MHDN13-50590
Date:type:
6" Horizontal Quad
Open Downlight
firm name:
CFR6126EB
PROJECT:
One 26W Quad Tube 4-Pin Lamp
Non-IC Rated
120V, 208V, 240V, 277V, or 347V
Ceiling Cutout: 6-1/4"
Maximum Ceiling Thickness: 1-1/4"
Not to Scale
Voltage=Specify
17-1/2"
W/ EM
Featuring
14-3/8"
W/O EM
Reflectors
APPLICATIONS:
The CFR6126EB offers a horizontally lamped
compact fluorescent downlight and wall wash
fixture that provides superior brightness and glare
control. This luminaire is ideal for a wide variety
of low to medium height ceiling applications
including commercial, retail, and hospitality.
The CFR6126EB is compatible with the Signos6
family of architectural elements.
HOUSING:
One-piece galvanneal18-gauge cold rolled
steel platform. Prewired J-box with snap-on
cover for easy access. Vented at lamp tip and
socket for maximum light output. Same housing
accommodates downlight and wall wash
downlight reflectors.
LAMP:
One (1) 26W quad tube with G24q-3 base.
Lamp furnished by others or as option below.
SOCKET:
One (1) injection molded socket (vented).
INSTALLATION:
Universal adjustable mounting brackets
accommodate 11/2" or 3/4" lathing channel
or 1/2" EMT (by others), or Prescolite 24" bar
hangers (B24 or B6).
15"
LABELS:
UL Listed or UL/CSA listed with CDN option for
damp locations. Approved for through wiring.
Non-type I.C. and NYC approved.
REFLECTOR:
High purity aluminum Alzak Virtual Source®
iridescence suppressed reflector. Self-trim
standard. Painted white self-trim available.
Baffled units standard with painted white self-trim.
lamp included option:
Specify lamp type Q4 (Quad 4-pin) and
temperature as shown below.
6-1/8"
W/O EM
BALLAST:
One (1) 26W compact fluorescent Class ‘P’
electronic multi-volt (120V through 277V) ballast
for long life and quite operation. HPF and EOL
protection standard. Accessible from below
ceiling. 347V available.
1-1/4"
5-3/4"
Please Note: Lamps must be operated at full capacity for
100 hours before being dimmed to reach optimum performance.
Catalog Number:
Housing
7-1/8"
W/EM
7"
example: CFr612ebdm st372aimfc lp26q430k b6
Housing Options
Housing Options
❑CFR6126EB
6", (1) 26W Quad
tube, multi-volt
electronic ballast
❑CDN
ECDM
Canadian electrical code
Lutron EcoSystem or 3-wire
compliant ballast
line voltage dimming ballast
disconnect
(120-277V). Dims to 5%.
❑ CDN 347V1
7DM
Canadian electrical code Advance Mark 7 Dimming
compliant ballast Ballast to 5%, 4-wire, 0-10V,
disconnect
analog (120V–277V)
❑CP 2
XDM
C
hicago Plenum. Fixture
Advance Mark 10 Dimming
construction and/or
Ballast to 5%, 2-wire, line
specifications may vary.
voltage (specify supply
Refer to Chicago Plenum
voltage/wattage)
specification sheets on
❑EM3
www.prescolite.com for
Emergency battery pack
details.
with integral test switch and
DM
indicator light
Electronic Analog
❑FSDFA
Dimming Ballast to 3%,
Fuse kit installed at factory
4-wire, 0-10V, analog
❑RIF1
(120V–277V)
Radio interference filter
(single circuit)
SYL4
1
Dimming options not available in 347V.
Osram Sylvania Ballast
2
Top access required to service ballast for Chicago Plenum.
(available only for standard
3
Not valid with lensed trim.
EB option)
4
®
Available for Osram Sylvania Quick 60+ Limited Warranty Reflectors
❑ST372A1
6" Alzak reflector
Reflector finish
❑Blank
Specular
❑SS
Semi-Specular
❑MFC
American MatteTM
Reflector color
❑Blank
Clear Alzak
❑CG
Champagne Gold
Alzak
❑BL
Black Alzak
❑WE
Wheat Alzak
❑LW
when used with Osram lamp(s). See www.prescolite.com for SMT
Philips Advance SmartMate®
Light Wheat Alzak
details.
5
ballast
Not available for wall wash.
❑PW
WIH
Pewter Alzak
wiHUBB® Enabled (see
Reflector options
❑BB5
Painted black baffle
❑WB5
Painted white baffle
❑WT
Painted white
self-flange
❑WW
Wall wash reflector
❑TRG
Trim Ring Gasket
(factory installed)
Painted Options*
❑WC 5-White Cone
❑BC 5-Black Cone
*All painted options
come standard with
an upper specular
clear Alzak reflector.
Accessories
❑B24
Set of two (2) 24" bar
hangers for
T-bar ceilings
❑B6
Set of two (2) bar hangers
for ceiling joists up to 24"
centers
❑FSDFI
Fuse kit for field installation
❑SCA6D_
Sloped ceiling adapter
(see note on back page)
❑Signos63,5
Architectural glass
elements
Refer to specification
sheets ARCH-SIG001through -004
LAMP ACCESSORIES
❑LP_____________
-wattage= 26
-type= Q4 (Quad 4-pin)
-temp= 27K, 30K, 35K,
41K (Kelvin)
*Example: LP26Q441K
page 3)
In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.
A Division of Hubbell Lighting, Inc.
Web: www.prescolite.com • Tech Support: (888) 777-4832
ARCH-CFL-004
Catalog Number:
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
CFR6126EBDM VOLTAGE=SPECIFY
ST372A1 B24 SR6080NF
Notes:
PHOTOMETRIC DATA
Type:
D2D
MHDN13-50590
Architektū
¯r - 6" Horizontal Quad
Open Tube Downlights - CFR6126EB
Ballast Data
Lamp Data
120V 277V 347V
Total System Watts
Input Current (Amps)
Input Frequency
Power Factor
Ballast Factor
Total Harmonic Distortion
Minimum Starting Temp.
20W
0.17
50Hz or 60Hz
>97%
>98%
<10%
-18° C (0° F)
29W
0.11
50Hz or 60Hz
>97%
>98%
<10%
-18° C (0° F)
31W
0.09
50Hz or 60Hz
>97%
1
<10%
-18° C (0° F)
26W Quad
Rated Watts
26W Quad
Rated Lumens
1800
Efficacy (LPW)
69
Rated Life
10,000 hours
CRI82
Minimum Starting Temp. 0° F
Notes
Denotes a Virtual Source reflector.
Refer to www.prescolite.com for additional photometric tests
(IES Files).
When ordering a sloped ceiling adapter, specify the degree of
slope in 5° increments, max. of 35°. For a more precise degree
or wet ceiling applications, please contact factory. Sloped ceiling adapter and housing must be installed at the same time.
Note: Use of horizontally-lamped open downlights with amalgam-based CFL lamps in air-handling plenums is
not recommended because cool air flow over the lamps will result in reduced light output. Prescolite recommends
vertical lamp downlights or use of the regressed lensed trim option for horizontal downlights in these applications
to reduce this effect. Refer to Prescolite White Paper WP0003 at www.prescolite.com for more information.
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd. • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2011 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-004 • 8/29/11
Catalog Number:
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
CFR6126EBDM VOLTAGE=SPECIFY
ST372A1 B24 SR6080NF
Notes:
Type:
D2D
MHDN13-50590
PHOTOMETRIC DATA
wiHUBB®
Fixture comes with a pre-installed In-Fixture Module (1 relay, 0-10V) compatible with the HBA wiHUBB system. Actual
dimming requires the selection of 0-10V dimming ballast as well. Consult factory for compatibility with EM fixtures.
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd. • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2011 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-CFL-004 • 8/29/11
Catalog Number:
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Type:
CFR6126EBDM VOLTAGE=SPECIFY
ST372A1 B24 SR6080NF
D2D
Notes:
MHDN13-50590
Round Architectural
Elements
6" SR SERIES
DATE:type:
firm name:
PROJECT:
One and Two Level
Architectural Elements
Designed for compact fluorescent,
incandescent, and metal halide
recessed downlights.
Reflectors
Featuring
PRODUCT ATTRIBUTES:
Each element of Signos is made from
premium materials and is created by hand.
The imported glass elements are cast from
custom molds and are engineered and
manufactured especially for Prescolite by
experienced craftsmen. The frosted glass
elements are subjected to an elaborate
bead blasted process to create a perfectly
uniform visual and luminous distribution.
The aluminum foundation flange is hand
spun and soft polished, then clear coated
or painted to ensure a natural, long-lasting,
durable finish. In the final steps of the
process, each Signos element is inspected
for perfection and assembled by hand with
protective gloves to reveal a pristine, high
quality highly aesthetic finished product.
APPLICATIONS:
Signos6 elements are ideal for architectural
applications with 8', 9' and 10' ceilings.
By combing these elements – cut glass,
aluminum and acrylic accents – everyday
downlights can be transformed into architectural statements that complement the hard
edges of today’s trend setting designs. The
intentional open design of Signos allows
the fixture to meet the ambient illumination
requirements while providing a luminous
focal point. There is no need for a separate
decorative fixture; Signos combines two
systems into one, reducing energy requirements as well as initial installation costs.
REFLECTOR:
High purity aluminum Alzak processed reflector
featuring Virtual Source®
optical design
for optimum efficiency and superior brightness
control. Self-trim (ST) standard. Refer to specification sheet ARCH-OPT-1 for reflector finish
options.
SR6090
Overall Height: 1.9"
Flange Diameter: 9.1"
INSTALLATION:
Installation of Signos6 architectural elements
is fast, easy, and secure. Signos trims are attached directly to the housing frame completely
separate from the reflector via a unique sky
twist bracket. The trim safety wire attaches to
the sky twist bracket to keep the trim captive
and allows it to swing away from the aperture for
quick relamping and maintenance. The sky twist
lock design allows for quick replacement of trim
to the ceiling plane.
SR6075
Overall Height: 2.4"
Flange Diameter: 9.1"
HOUSING:
Signos6 round architectural elements are designed to attach to 6" Prescolite modular downlight frames, including compact fluorescent,
incandescent, and metal halide series, CFQ6,
CFT6, CFR6, CFCB6, 79X, INC600, 79M and
RHD601 with electronic ballast. (Not available
with 79M150EB housing. Signos elements can
be attached after the downlight has been installed
and the ceiling is finished. Refer to luminaire
specification options below.
LABELS:
SR6055NF
Overall Height: 2.7"
Small Flange Diameter: 8"
Dimensions
Aperture: Nominal 6"
UL, CSA listed
Max. Ceiling Thickness: N/A
Catalog Number:Example: cft632eb-stf602mfc-b6-sr6060
Specification Information – Signos 6" Round*
elements
❑ SR6010
❑ SR6030***
❑ SR6045
❑ SR6055
❑ SR6060
❑ SR6070
❑ SR6075
❑ SR6080
❑ SR6090
❑ SR6095
❑ SR6100
❑ SR6105
❑ SR6110
❑ SR6115
❑ SR6120
housings and reflectors
❑ CFQ613EB-STF602
❑ CFR613UQEB-ST372A
❑ CFQ618EB-STF602
❑ CFR618EB-ST372A
❑ CFQ626EB-STF602
❑ CFR6126EB-ST372A1
❑ CFR626EB-ST372A
housings and reflectors
❑ CFT632EB-STF602
❑ CFT632HEB-STF602H
❑ 79X-ST832
❑ INC600-STI602
❑ 79M2-ST832
❑ 79M7-ST832
❑ 79M5-ST832
❑ RHD601-STH6021
elements
A D v s on of Hubbe L ght ng, Inc.
**
*Refer to www.prescolite.com for additional reflector options and accessories. Not compatible with regressed lens options.
**All housings and reflectors shown
feature Virtual Source technology
except 79X, 79M2, 79M7, and
79M5.
***SR6030 cannot be used with INC600
1
For use with electronic ballast only
In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.
Web: www.prescolite.com
•
Tech Support: (888) 777-4832
ARCH-SIG-001
Catalog Number:
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Type:
CFR6126EBDM VOLTAGE=SPECIFY
ST372A1 B24 SR6080NF
D2D
Notes:
MHDN13-50590
SIGNOS 6" ROUND ARCHITECTURAL ELEMENTS
fixed assemblies
Refer to specification sheets ARCH-SIG-003 for custom options. Visit www.prescolite.com for IES formatted photometrics for various recessed housings and Signos
combinations. All round fixed assemblies are shipped with a standard foundation flange (9.1"), unless otherwise noted. A small foundation flange (8") can be specified as an alternative. Add NF for the small foundation flange at the end of the catalog number.
SR6030
Standard brushed and painted
brass foundation flange and
frosted glass dome.
OH1: 4.1", FD2: 9.1" dia.
SR6045NF
Small brushed aluminum foundation flange and two frosted
glass rings.
OH1: 2.6", SFD3: 8" dia.
SR6055NF
Small brushed aluminum
foundation flange, frosted
glass ring, cobalt blue acrylic
disk with frosted glass ring,
and architectural armature.
OH1: 2.7", SFD3: 8" dia.
SR6060
Standard brushed and painted brass foundation flange,
frosted glass ring, and cobalt
blue acrylic ring with frosted
glass ring.
OH1: 2.7", FD2: 9.1" dia.
SR6070
SR6075
Standard brushed aluminum
Standard white foundation
foundation flange, cobalt blue
flange, cobalt acrylic ring with
acrylic ring, and frosted glass ring frosted glass ring, brass finials
1
with cobalt blue acrylic disk. OH : and armature with cobalt blue
glass cone. OH1: 2.4", FD2:
2.6", FD2: 9.1" dia.
9.1" dia
SR6080NF
Small brushed aluminum
foundation flange with two
brushed aluminum rings.
OH1: 2.2", SFD3: 8" dia.
SR6090
Standard white foundation
flange, frosted glass ring with
ruby red acrylic ring, and
white architectural armature.
OH1: 1.9", FD2: 9.1" dia.
SR6095
Standard brushed aluminum
foundation flange, and
perforated aluminum ring
with aluminum caming rings.
OH1: 1.5", FD2: 9.1" dia.
SR6100NF
Small white foundation
flange, and white perforated
aluminum ring with white
caming rings.
OH1: 1.5", SFD3: 8" dia.
SR6110NF
Small brushed aluminum foundation flange and
clear glass disc with
frosted center.
OH1: 1.7", SFD3: 8" dia.
SR6115NF
SR6120
Standard brushed aluminum
foundation flange and clear
glass ring.
OH1: 1.7", FD2: 9.1" dia.
SR6010
Standard brushed aluminum
foundation flange with
glass ring.
OH1: 1.7", FD2: 9.1" dia.
SR6105
Standard brushed aluminum
foundation flange, clear glass
disc with frosted center and a
aluminum caming ring.
OH1: 1.7", FD2: 9.1" dia.
1
2
6" Luminaire Matrix*
3
CFL-Quad Tube
Vertical Lamp
CFL-Triple Tube
18W
26W
Housing: CFQ613EB
Reflector: STF602 – Clear
STF602MFC –
American Matte
Housing: CFQ618EB
Reflector: STF602 – Clear
STF602MFC –
American Matte
Housing: CFQ626EB
Reflector: STF602 – Clear
STF602MFC –
American Matte
Housing: CFT632EB
Reflector: STF602 – Clear
STF602MFC –
American Matte
Housing: CFR612EB
Reflector: ST372A1 – Clear
Housing: CFT632HEB
Reflector: STF602H – Clear
STF602HMFC –
American Matte
Horizontal Single Lamp
Horizontal Two Lamp
Housing: CFR613UQEB
Reflector: ST372A – Clear
ST372AMFC –
Am. Matte
Housing: CFR618EB
Reflector: ST372A – Clear
ST372AMFC –
American Matte
HID
Incandescent
26W26W/32W/42W 75W PAR-30L 150W A-21
150W PAR-38 100W A-19
13W
Overall Height
Flange Diameter
Small Flange Diameter
Housing: 79X
Housing: INC600
Reflector: ST832 – Reflector: STI602 – Clear
Clear
STI602MFC
– Am. Matte
100W
PAR-38
CDM
50, 70, OR
100W
ED-17
Housing: 79M2 Housing: RHD601
79M7 Reflector: STH602 79M5 – Clear
Reflector: ST832 STH602MFC –
– Clear
Am. Matte
Housing: CFR626EB
Reflector: ST372A – Clear
ST372AMFC –
American Matte
* Refer to www.prescolite.com for additional reflector options. Not compatible with regressed lens option.
Installation Features
Sky twist mounting brackets snap onto Prescolite plaster flange for easy trim mounting. Brackets are equipped with safety wire to secure trim to housing. Trim safety
wire allows product to be relamped without having to remove trim from ceiling. Mounting brackets can be installed from below ceiling.
Sky Twist
Mounting Brackets
1 Brackets snap onto
plaster flange for
easy trim mounting
2 Safety wire
keeps trim secure
to housing
3 Twist lock for
fast relamping
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Blvd. • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2010 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • ARCH-SIG-001 • 1/18/10
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
CFR6126EBDM VOLTAGE=SPECIFY
ST372A1 B24 SR6080NF
Notes:
Type:
D2D
MHDN13-50590
Catalog Number:
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Type:
6 304 17 01* 6 300 90 90 U
VOLTAGE=120 6 207 02 04 302 20 22
W1
Notes: Specify Mounting
MHDN13-50590
NORTH AMERICAN EDITION
USA +1(954) 677 9800 - www.deltalight.us
Canada +1(905) 813 6130 - www.deltalight.ca
TOPIX
Specification Sheet
1” 5/8 x 1” 1/2
TOPIX
6 304 17 01
= A (ALUMINUM GRAY)
= W (WHITE)
INCL.2 x POWERLED WHITE 1W / 6500K
* - Specify Standard Finish
EXCL.LED POWER SUPPLY 350mA-DC
CURRENT CONTROLLED
CLASS 2 CIRCUITS ONLY
IP20
TOPIX NW
6 304 17 04
= A (ALUMINUM GRAY)
= W (WHITE)
INCL.2 x POWERLED WHITE 1W / 4000K
ADA
TOPIX WW
6 304 17 02
= A (ALUMINUM GRAY)
= W (WHITE)
INCL.2 x POWERLED WHITE 1W / 3000K
TOPIX BLUE
6 304 17 01 BL
= A (ALUMINUM GRAY)
INCL.2 x POWERLED BLUE 1W
OPTIONS
MUD KIT 4 - 6 207 02 04
CONCRETE BOX TR 154 - 302 20 22
LED POWER SUPPLY 350mA-DC
LED POWER SUPPLY 350mA-DC DIM
6 300 90 90 U - LED Power Supply 12V-DC / 10W 120V Class 2
Voltage=120
*** - Specify Mounting Hardware
6 207 02 04 - Mud Kit 4
302 20 22 - Concrete Box TR 154
65mm
2”-9/16
135mm
5”-5/16
35mm
1”-3/8
Mud Kit 4
MUD KIT 4
6 207 02 04
4”-1/16
Ø1”-7/8
64mm
2”-1/2
4”-1/16
20mm
13/16”
Concrete Box TR 154
1"-11/16 x 1"-11/16
CONCRETE BOX TR 154
302 20 22
2”-3/8
1”-11/16
1”-11/16
PROJECT NAME:
FIXTURE TYPE:
SPECIFIER NAME:
DATE:
1
Catalog Number:
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
NORTH AMERICAN EDITION
Type:
6 304 17 01* 6 300 90 90 U
VOLTAGE=120 6 207 02 04 302 20 22
Notes: Specify Mounting
W1
MHDN13-50590
USA +1(954) 677 9800 - www.deltalight.us
Canada +1(905) 813 6130 - www.deltalight.ca
TOPIX
Specification Sheet
PROJECT NAME:
FIXTURE TYPE:
SPECIFIER NAME:
DATE:
2
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
LESC*G*NA-W
Type:
X1
Notes:
MHDN13-50590
LES Series
Architectural Surface-Mounted LED Edge-Lit Exit Sign
Catalog Number
Comments
FEATURES
Type
Application
The LES Series provides bright, even letter illumination in an energy-saving LED
edge-lit exit sign configuration. AC only operation. Special Wording ("SW")
option allows customizing the stencil field to convey important information.
Construction
Water-clear injection-molded acrylic EXIT plaque is available with clear,
white or mirror backgrounds. High strength extruded aluminum trim
available in six finishes. Exit face design in single or double face with red
or green letters. Custom printed directional chevron arrows. Standard
EXIT stencil with 6" letters and ¾" stroke; 8" letters for New York City
requirements available as an option.
Ceiling Mount
Wall Mount
Installation
Mounts to standard electrical boxes up to 4" square via universal adaptor plate
and mounting canopy assembly. All mounting hardware is fully concealed.
Illumination
Exit face illumination is provided by energy saving, long life red or green
LEDs. Exceeds UL 924 requirements for brightness and uniformity.
End Mount
Compliances
UL 924 Listed
NFPA 70
NFPA 101
Special Wording Option
Warranty
5 years full.
ORDERING GUIDE
LES
SERIES
MOUNTING
LES
C Ceiling mount
W Wall mount
E End mount
FACES
S Single
D Double*
* Not for use
with wall
mounted
models.
LETTER
COLOR
R Red
G Green
* - Specify Number of Faces
1
2
3
4
5
6
DIRECTIONAL
ARROWS
X No arrows EXIT
R Right arrow* EXIT>
L Left arrow* <EXIT
D Double arrows
<EXIT>
C L/R arrows**
<EXIT/EXIT>
* Not for use with
double face models.
Use “C” L/R arrow
designator
** Double face models
only. Provides reversible
right or left arrow
indicator
TRIM/HOUSING
FINISH
N Satin
Aluminum
W White
OPERATION
A AC only
C Chrome
B Black
S Satin brass
Z Dark Bronze
* - Specify Arrow Configuration
For use with single face models only. Standard on double face models.
LES exit models with 8" plaques registered under NY-BEC Calendar number 42135 for use in New York City.
Single face LES exit signs specified with the -8L option are supplied without backgrounds. Double face models specified with the -8L option are supplied with mirror backgrounds.
Specify special wording code from page 3 when ordering. Example: SW41
Special wording option not available with 8" letter plaque.
Some special wording signs not available with directional arrows.
OPTIONS
SW See available special
wording choices on
page 3 4,5,6
W White plaque
background
M Mirror-plaque
background 1
8L 8" letter plaque (red
letters only) 2,3
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
LESC*G*NA-W
Type:
X1
Notes:
MHDN13-50590
LES Series
Architectural Surface-Mounted LED Edge-Lit Exit Sign
DIMENSIONS
SPECIFICATIONS
Electronics
Available in AC only operation. All components mounted inside housing.
Includes AC-on indicator and pre-stripped AC input pigtail leads.
AC Input: 120/277VAC, 60 Hz.
Operating Temperature Range: 20°C to 30°C (68°F to 86°F
Power Consumption (120/277VAC)
Single Face
Double Face
Red AC Only Models:
2.2 watts
3.4 watts
Green AC Only Models:
2.5 watts
4.0 watts
* Wattage figures include LED lamps, transformer and electronics power requirements.
Ceiling Mount
Wall Mount
End Mount
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
LESC*G*NA-W
Type:
X1
Notes:
MHDN13-50590
LES Series
Architectural Surface-Mounted LED Edge-Lit Exit Sign
LES Series architectural surface-mounted LED edge-lit exit signs feature an option for standard or custom special-wording. The images
below represent standard special-worded signs available for the LES Series. The artwork and silk-screening for the standard signs shown
below were previously developed therefore pricing for these special-worded signs do not incur a setup charge.
If your special-worded requirements do not appear on this page, please contact the factory to request your custom special-wording sign.
Custom special wording signs incur a one time set-up charge for each development.
STANDARD SPECIAL WORDING SIGNS WITH DIRECTIONAL ARROWS
SW118
SW41 (Arabic/Exit)
SW13
SW10
SW69
STANDARD SPECIAL WORDING SIGNS WITHOUT DIRECTIONAL ARROWS
SW4
SW3
STANDARD SPECIAL WORDING SIGNS
Category
EXIT
DO NOT ENTER
EVACUATION
LABORATORY
RESTROOM/
FACILITIES
INTERNATIONAL
EXITS
Special
Wording
Number
Description
SW
2
SW
142
EXIT (TEXT IS INVERTED)
SW
144
EXIT (W/ WHEELCHAIR
SYMBOL)
NOT AN EXIT
SW
3
IN USE
SW
10
AREA OF REFUGE
SW
11
AREA OF REFUGE WITH
WHEELCHAIR SYMBOL
SW
13
AREA OF RESCUE ASSISTANCE
WITH WHEELCHAIR
SYMBOL
SW
48
STAIRS
SW
149
AREA OF/ RESCUE
SW
4
X-RAY IN USE
SW
31
LASER IN USE
SW
118
HANDICAPPED (SYMBOL
ONLY)
SW
41
ARABIC/ EXIT
SW
69
SALIDA
NOTE: Special worded signs do not meet letter size requirements of UL 924.
Web: www.dual-lite.com • Tech Support: (866)-313-3909
701 Millennium Blvd. • Greenville, SC 29607 U.S.A.
Copyright © Dual-Lite, a division of Hubbell Lighting, Inc., All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • 0601683 D 10/12
SW31
SW2
SW11
Submitted by MH Lighting and Controls
Job Name:
UCHSC - Anschutz Medical Campus Building 500 CU
Foundation Renovation
Architect: Bennett Wagner Grody Architects
Denver)
Catalog Number:
LESC*G*NA-W
Notes:
Type:
X1
MHDN13-50590