PROJECT:
LED SERIES
A4WLED
TYPE:
Wall Wash Downlight
Features
• LED module features unique remote corrected cold phosphor
technology enabling a high system efficacy, greater than 95CRI*
and the industry best color consistency of 1x2 SDCM
(Standard Deviation Color Matching).
80+ CRI,R9 value of 25+ typically factory standard.
• Five Year Color Consistency and Lumen Maintenance Warranty
Modules are guaranteed to deliver visual consistant light from
luminaire to luminaire.
• LEDsource systemTM consists of a“toolless”replaceable
interchangeable LED module, heatsink, quick disconnect flex
connector and mounting plate allowing for changeable lumen
selection and EZ replacement.
• 700, 1000, 1300 & 2000 lumen LED modules available.
• All lumen options require NO additional“fan cooling”or
“active cooling”of any type.
• Rated life is 50,000 hours at 70% lumen maintenance (L70)
• 5 year limited warranty, including consistency and lumen
maintenance.
• Standard“Future-Proof”adjustable output current (AOC) driver
delivers the required output needed for various LED modules.
• Flicker-free 0-10V analog dimming down to 10% capability
standard. Optional Lutron Hi-Lume A-Series driver allows for
smooth, continuous, 1% dimming.
• Self-flanged Semi-Specular clear reflector features soft, smooth
illumination with performance soft edged beam control and 50°
cutoff to light source.
• LED source contains no mercury, UV, or IR content.
• LED luminaire is IP65 rated with lens option.
* Offered in Artist Series™ for 700, 1000 , 1300 and 2000 lm module
packages.
Ceiling insulation must be kept 3˝ away from housing.
Listed for damp locations per UL1598.
Listed for IP65 rated wet locations under covered canopy per UL1598.
Tested and Listed to
ETL/UL standard 1598
and CSA standards.
21 Father Devalles Blvd. Fall River, MA 02723 P. 508.678.1900
www.ASTARlighting.com
LED FIXTURE:
LED Module
Diecast aluminum sealed IP66 rated Xicato XSM80 series corrected cold
phosphor module. CRI 80, 2700K, 3000K, 3500K, 4000K.
Lumen maintenance of 50,000 hours at L70 when maintained in a 35° C
ambient environment.
TYPE:
PROJECT:
HOUSING ORDERING INFORMATION
Housing Series
4” LED Round Lens Wall Wash
LED Driver
Advance Xitanium multi volt 120-277V constant current driver with
standard 0-10V analog dimming capability. Generic LED driver available
with 0-10V analog dimming capability.
A4LW
UL Listed driver with a operating temperature of 70°C/-40° C class 2
rated, FCC 47 CFR Part 15 / Class A. Driver mounted to a galvanized snap
on cover for easy access and removal.
A4LW
Lumen Package & Series Selection
700 Lumen Module
1000 Lumen Module
1300 Lumen Module
2000 Lumen Module
Artist Series™
700 Lumen Module
1000 Lumen Module
1300 Lumen Module
2000 Lumen Module
Vibrant Series™
1300 Lumen Module
2000 Lumen Module
7
10
13
20
Reflector Optics
Single piece hand spun semi-specular clear Alzak® reflector with 50°
cutoff to LED module. Factory standard self trim flange with a white
finish.
A7
A10
A13
A20
Construction
Extruded aluminum heatsink.
Prewired electrogalvanized heavy steel junction box listed for through
branch circuit wiring with 1/2˝ & 3/4˝ pryouts.
Heavy gauge aluminum diecast housing ring with adjustable
mounting ears with steel hanger bars included.
V13
V20
Color Temperature
2700K
3000K
3500K
4000K
27K
30K
35K
40K
Luminaire Spacing Requirements
LED luminaires with any lens and lensed wall wash options must be
spaced at least 24”apart, 12”from walls, and must have a 1/2”clearance
above housing.
Xicato Vibrant Series™ color temperature only available in 3000K
Voltage
120V
120
277V
277
Driver Options
Lutron Dim. Driver LTE (2 Wire, 120V only) LD1
Lutron Dim. Driver L3D (3 Wire)
LD2
Iota Constant Power Emerg. Battery LEMG
Ceiling insulation must be kept 3˝ away from housing.
Listed for damp locations per UL1598.
Listed for wet locations under covered canopy per UL1598.
(5W Output Power, 2.7 Watts Input Rating)
Iota Constant Power Emerg. Battery LEMG7
(7W Output Power, 3.7 Watts Input Rating)
Iota Constant Power Emerg. Battery LEMG10
(10W Output Power, 5.5 Watts Input Rating)
Housing Options
Extendable 24” Bar Hanger
Extendable 27” Caddy Bar Hanger
Extendable 29” Caddy Bar Hanger
Custom Frame Mod.
BH
CB517
CB520
CFM
(Consult Factory)
REFLECTOR ORDERING INFORMATION
Reflector Series
4 1/4˝ Solite Wall Wash Lens
Reflector Finish
Specular Clear “Alzak”
SP
Semi-Specular
SS
Etched Haze
HZ
Lens Holder Reflector Color
Clear “Alzak”
CL
Gold “Alzak”
GO
Wheat “Alzak”
WT
Pewter “Alzak”
PW
Umber “Alzak”
UM
White
WH
Trim Options (white trim flange factory standard)
High Polish Flange
PFL
Black Trim Flange
BLK
Custom Color Trim Flange
CC
Flange Gasket
GSKT
UL1598 Wet Location
WT
A4LW
Notes: (1) Spacing Requirements - See Luminaire Spacing Requirements
21 Father Devalles Blvd. Fall River, MA 02723 P. 508.678.1900 www.ASTARlighting.com