LIGHTPLANE 3.5 RECESSED WET LOCATION
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa .com
LIGHTPLANE 3.5 Recessed Wet Location
Page 1 of 2
TYPE:
Specification and Ordering Information:
1. Style:
2. Length:
*LP3.5RTWL - Recessed Trim (LP3.5RTWL)
**LP3.5SMBWL - 3-1/2” Surface Mounted Back Channel (LP3.5SMBWL)
*Trim version is not designed for direct concrete pour application
** Requires an already finished surface opening to exact dimensions
Individual (2’,3’,4’)
*Continuous (Lens Connecting Piece Every 4’- Enter total run length, i.e. 20’)
* Not available for Trim version
3. Linear Lamping:
HP900- 900 Lm/ft High Performance LED 7W/LF (HP900-Old HP7)
3500K
4000K
2700K
3000K
HP1200- 1200 Lm/ft High Performance LED 9W/LF (HP1200-Old HP10)
3500K
4000K
2700K
3000K
HP1500- 1500 Lm/ft High Performance LED 14.5W/LF (HP1500-Old HP14)
2700K
3000K
3500K
4000K
SP900- 900Lm/ft Standard Performance LED 9W/LF (SP900)
*SPTW1000 - Standard Performance Tunable White 1000 Lm/ft 2700K to 5700K LED 11W/LF (SPTW1000)
CV450- Decorative, 440 Lm/ft, Constant Voltage LED 6.5W/LF (CV450)
3000K
4000K
CV900- Decorative, 880 Lm/ft, Constant Voltage LED 13W /LF (CV900)
3000K
4000K
RGB - LED Color Changing 5W/LF (RGB)
T5 - Fluorescent - Standard Output T5 (T5)
Δ
1R (1-lamp Regular)
2R (2-lamp Regular)
T5HO - Fluorescent - High Output T5 (T5HO)
Δ
1R (1-lamp Regular)
2R (2-lamp Regular)
**T8 - Fluorescent (T8)
Δ
1R (1-lamp Regular)
2R (2-lamp Regular)
*Raw lumens and system watts information when both warm white and cool white LEDs are at 100%.
**T8 lamps will not work in nominal 2x2 or 2x4 grids without modifying grid length.
Δ
2R, not available in LED specification.
Raw lumen and system watts (with driver loss included for all other LEDs)
LED board length increment availability:
HP series - 11.2”, SP900 CV series - 2.25”, SPTW1000 - 11”, CV series - 2”
3 13
16 "
3 11
16 "
4 38 "
1
16
"
6. Finish:
2 11
16 "
5
8
* AL (Natural “Ultimatte” aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
NTM - Natatorium Finishing, for Swimming Pool Applications (NTM)
AM - Antimicrobial Finish and Lens Coating (AM)
* AL is standard on all Lightplane 3.5 product
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
"
4"
11
3 16
"
3
34"
3
16
"
LP3.5SMB-WL
(Lens is flush with ceiling but
end cap will be below ceiling plane)
120 - 120 volt (120)
277 - 277 volt (277)
UNV - Universal voltage (UNV)
347 - 347 volt (not available in dimming) (347)
www.alwusa.com
"
LP3.5T-WL
(Lens is flush with ceiling but
end cap will be below ceiling plane)
4. Linear Driver/Ballast Specification:
*LED - LED Power Supply, non-dim (LED)
*LED-DIM - LED Power Supply with 0-10V dimming (LED-DIM)
10% Standard Option
1% Premium Option
0% Premium Option
*LED-DALI - LED Power Supply with DALI dimming 0%-100% (LED-DALI)
*LED-DMX - LED Power Supply with DMX dimming 0%-100% (LED-DMX)
*RGB-DMX- RGB with DMX Interface module 0%-100% DMX controller not included (RGB-DMX)
*HILUME-A2- Lutron Hi-lume® A LTE Series LED line voltage 2-wire control (120v only) 1%-100% (HILUME-A2)
*HILUME-A3- Lutron Hi-lume® A L3D Series LED EcoSystem® or 3-wire control 1%-100% (HILUME-A3)
STD - Standard Electronic, non-dim <10%THD (STD)
DIM - 0-10V Dimming (DIM)
HILUME3D - Lutron Hilume 3-D® (HILUME3D)
HSERIES- Lutron H-SERIES® Dimming (HSERIES)
ECOSYS- Lutron ECOSYSTEM® Dimming (ECOSYS)
* OPTION FOR LINEAR LED ONLY
Please consult ballast manufacturer for lamp/ballast compatibility.
5. Voltage:
3
16
3 11
16 "
5 11
16 "
LP3.5SMB-WL
(Showing end caps)
LIGHTPLANE 3.5 Recessed Wet Location
Page 2 of 2
TYPE:
7. Additional Options (Leave blank if None):
EMBP - Emergency Battery Pack (EMBP)
EMC - Emergency Circuit (EMC)
*CW - Cold Weather Ballast(-22ºF/-30ºC) and EMBP(0ºF/-18ºC)
*Fluorescent option only. Minimum starting temperature is voltage and lamp dependent.
Consult factory for specific job requirement.
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
IP 6 6
SOLID OBJECT INGRESS
LEVEL
WATER INGRESS
LEVEL
Dust tight
Protected against powerful
water jets and heavy seas
6
6
Design Specifications
Construction
Extruded architectural grade 6060-T5 aluminum. Minimum wall thickness is .080” 100% recyclable.
Reflectors are formed from .040 aluminum and finished in Titanium
white powdercoat.
Lenses are made from twin layered extruded high-impact acrylic.
Electrical Details
All ballasts are electronic <10% THD (available with cold weather option)
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
All LED drivers are integral electronic Class 2.
LED light engine is LM-80 compliant with 80 CRI minimum.
Emergency
Fixtures can be wired for emergency circuit or emergency battery
backup.
Emergency one-lamp ballasts provide 90 minutes of illumination.
T5/T5HO = Initial output of 1300 Lumens
Finish
All fixtures are standard in Ultimatte aluminum finish (AL) A deep etch and two-step clear anodizing process that
gives a smooth, clean and durable surface.
Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa.com