Xineos-3131
CMOS Flat Detector for Dynamic X-Ray Imaging
Xineos CMOS X-ray Flat Detectors.
High Speed, Low Dose Imaging at
Full Resolution.
Utilizing Teledyne DALSA’s proprietary Rad-Hard CMOS Active Pixels, the Xineos family of CMOS X-ray
Flat Detectors is the industry’s first to exceed the low dose performance of Image Intensified detectors
whilst providing all the benefits of flat panel detectors. This performance is provided at full speed and full
resolution while setting new industry benchmarks in DQE, low power dissipation and radiation lifetime.
The Xineos-3131 is available for Dental, Industrial and Scientific X-ray purposes. These Dynamic X-ray
applications benefit from 30 fps frame rates at full resolution combined with exceptionally low noise and
elimination of image artifacts. Region of Interest (ROI) modes can be used to capture small regions of
interest at 200 fps or faster.
Key Features
• Monolithic Crystaline Silicon
Specifications (Typical Values @ RQA5)
• CMOS Active Pixel Design
• 198 µm pixel pitch
• Best in class DQE at all doses
• High MTF
• Long X-ray Lifetime
• Low readout noise
• Low image lag
• Low dark current
• Up to 30 fps at full resolution
• 200 fps or more in Panoramic Mode
• GigE data interface
• CsI scintillator
Typical Applications
• LFOV Dental CBCT
• Frame Based Panoramic Imaging
• Industrial CBCT
• Scientific X-ray Crystallography
• Veterinary Imaging
CMOS Pixel Array Pixel Size
X-ray Sensitive Area
Energy Range
Saturation Dose Per Frame
Frame Rates
Bit Depth
Typical Dynamic Range
DQE (@ 0lp/mm, RQA5)
MTF (@ 1lp/mm, RQA5)
Image Lag
Non-Linearity
Data and Control Interface
External X-ray Pulse Sync
Power Supply
Detector Power Consumption
Lifetime X-ray Dose
Mass
1548 x 1548
198 µm x 198 µm
307 mm x 302 mm
40 kV to 120 kV
1 mR in Dynamic Range Mode
100 µR in Low Dose Mode
30 fps Pulsed X-ray Mode
full resolution, 15 ms exposure window
30 fps Continuous X-ray Mode
100% continuous integration time
>200 fps Panoramic Mode
100% continuous integration time
14 bits
69 dB in Low Dose Mode
75 dB in Dynamic Range Mode
75% @ 50 µR, 65% @ 0.1 µR (CsI Scintillator)
60% (CsI Scintillator)
<0.1% (Silicon Performance)
<1.5%
GigE Vision (using CAT6 Cable)*
TTL Master and Slave configurations
+12 VDC
Readout 16 W, Standby 10 W, Hibernate 5 W
1 MegaRad
16 kg
Xineos-3131
CMOS Flat Detector for Dynamic X-Ray Imaging
The Complete Xineos Family
After 50 years of Image Intensifier (II) dominance in
low dose X-ray applications, Teledyne DALSA has
introduced a complete family of CMOS X-ray Flat
Detectors. Xineos sets new benchmarks never
before achieved by II cameras or flat detectors.
Xineos-3131
Large format detector
designed to replace
12 inch II cameras
Xineos-2121
Mid-size detector to
designed to replace
9 inch II cameras
Xineos-1313
Single tile detector
designed to replace
6 inch II cameras
The detector is equipped
with following connectors:
• 12 V Power Supply to Detector
Connector type: Male 9 pin D-sub
• Trigger I/O, TTL level
Connector type: Lemo EXG.1B.304.HLN
• GigE Data and Control Interface
Connector type: HALO HFJ11-1G16E-L12RL
• 5 V Peripheral Power Supply from Detector
Connector type: Female 15 pin HD-15
(high density dsub)
*Note: Cables not supplied.
www.teledynedalsa.com
Americas
Waterloo, ON
+1 519-886-6000
sales.americas@teledynedalsa.com
Europe
Eindhoven, The Netherlands
+31 40-259-9000
sales.europe@teledynedalsa.com
Teledyne DALSA has its corporate offices in Waterloo, Canada
Teledyne DALSA reserves the right to make changes at any time without notice. Teledyne DALSA © 2013.
Asia Pacific
Tokyo, Japan
+81 3-5960-6353
sales.asia@teledynedalsa.com
Shanghai, China
+86 21-3368-0027
sales.asia@teledynedalsa.com