Applications: AS B36PLRIC-E IC DESCRIPTION: 6” B36PLR-IC-E • B392CL 13W DTT 22 8’ 6 6’ 10’ 12’ 8.9’ 11 13.3’ 4 22.2’ 17.8’ 2 14’ 26.7’ 1 30.1’ Initial Nadir Footcandles Beam Spread Data Certified by ATC 4’ Distance to Plane BEAM DIA. MEASURED AT 50% OF NADIR F.C. FEATURES: • Thermally Protected remodel compact fluorescent IC housing. • Integral fluorescent ballast. • Unit slips through 6-1/2" ceiling opening. • Four Preinstalled spring clips which secure the housing firmly into ceiling to accommodate ceiling thickness from 1/2" to 1-3/8". • Can be installed from below the ceiling. • Adjustable socket bracket with a slope indicator provides consistent lamp alignment and setup. • 7 1/4" height allows use in 2"x 8" joist construction. OPTION: 1. AIR-SHUT• Gasket to prevent air flow from heated or air conditioned spaces. • Meets all national air flow requirements. o13W o18W o26W SPECIFICATION: A. HOUSING - Die-formed, all aluminum construction for maximum heat dissipation and rust protection. B. SOCKET - One vertically mounted plug-in socket. Unitized optics guarantees proper trim to housing installation. Tool-less installation adjustability from inside the housing. C. INSTALLATION - Four Preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2" to 1-3/8". E 15" (381 mm) D ETL AND C-ETL LISTED for Damp location. ETL LISTED for Feed Through wiring. ETL LISTED for direct contact with insulation. B 7-1/2" (191 mm) o(E-AD) Advance Elec. Ballast (E) Electronic o 1 oAdv-7 oAdv-10 oLut-H (FDB) oREB-DIM-120 2 2 C Title 24 Approved only if ordered with electronic ballast and Air-Shut. - ITEM SELECTOR: (Please check the boxes below for the option desired) DIMMING A 6-1/2" (165 mm) Energy Star Compliant fixtures ship with electronic Energy Star compliant ballasts. BALLAST 6” 6-1/2" (165 mm) E. BALLAST - Thermally protected, current controlled ballast, will produce full light output, increase lamp life with no noise and flicker. Ballast supplied is manufactured by Advance. • Dependable, favorable design and effortless installation. WATTAGE* Thermally protected, IC rated specification grade remodel compact fluorescent recessed housing. For remodeling installations where housing will be in direct contact with insulation. Designed for sloped ceiling applications where the ceiling pitch ranges from 2/12 to 6/12. Accommodates (1) 13W, 18W or 26W compact fluorescent lamp. For fast and easy installation in existing plaster or mechanical ceilings from 1/2" to 1-3/8" thick. Four remodel clips are easily retractable for fixture removal if necessary. Junction box is provided with eight 1/2" KOs and four Romex knockouts with strain relief. D. JUNCTION BOX - Provided with eight 1/2" KOs and four Romex knockouts with strain relief. • Wire through junction box. B36PLRIC-E 2/12 to 6/12 Pitch (9º to 27º) 6” CFL SLOPE REMODEL IC HOUSING 6” COMPACT FLUORESCENT SLOPE IC REMODEL HOUSING VOLTAGE o120 o120 Energy Star o277 3 AIR-SHUT oAT AT=AIR-SHUT EMERGENCY OPTIONS oEMG 750 oEMG 1300 oEMG-D-750 oICE-1300 4,5 4,5 4,7 *See pages 80-89 for base type and wiring diagrams. (750 Lumens) (1300 Lumens) 4,6 (750 Lumens) OPTIONS oFUSE oRIF 8 F L U O R E S C E N T 9 (1300 Lumens) (1=E-AD=Advance Electronic Ballast) (2=Adv-10 and Lut-H(FDB) are not available on B36PLRIC-E-13) (3=Energy Star Ballast=Available in 120V only ) (4=See page 90-91 for more details) (5-EMG=Emergency battery pack w/ remote test switch) (6-EMG-D=Emergency battery pack w/ remote test switch for damp location) (7-ICE=Emergency battery pack w/ remote test switch operating between -18ºC and 55ºC) (8-FUSE=Single slow-blow fuse) (9-RIF=Radio interference filter) 1-877-375-5555 www.iuseelite.com 437