B6PLR
P
Application:
DESCRIPTION:
6”
22
6’
8.9’
11
13.3’
10’
4
22.2’
14’
1
30.1’
8’
6
12’
17.8’
2
Distance
to Plane
26.7’
Initial Nadir
Footcandles
Beam
Spread
Data Certified by ATC
4’
B6PLR • B701CL 13W DTT
BEAM DIA. MEASURED AT 50% OF NADIR F.C.
FEATURES:
• Thermally Protected Non-IC Remodel
compact fluorescent housing.
• Integral fluorescent ballast.
• Unit slips through 6-1/2" ceiling
opening.
• Four Preinstalled spring clips which
secure the housing firmly into ceiling
to accommodate different ceiling
thicknesses from 1/2" to 1-3/8".
• Can be installed from below
the ceiling.
• Wire through junction box.
• Dependable, favorable design and
effortless installation.
• 7 1/4" height allows use in 2"x 8"
joist construction.
OPTION:
1. AIR-SHUT• Gasket to prevent air flow from
heated or air conditioned spaces.
• Meets all national air flow
requirements.
Thermally protected, specification
grade compact fluorescent housing. For
new construction, non-insulated
ceilings or where insulation can be kept
3" from housing. Accommodates (1)
compact fluorescent lamp. For fast and
easy installation in existing plaster or
mechanical ceilings from 1/2" to 1-3/8"
thick. Four remodel clips are easily
retractable for fixture removal if
necessary. Junction box is provided
with eight 1/2" KOs and four Romex
knockouts with strain relief.
SPECIFICATION:
A. HOUSING - High temperature
painted 22 gauge cold rolled steel
construction for maximum heat
dissipation and rust protection.
0
1
2
3
B. SOCKET - One vertically mounted
plug-in socket for CFL lamp.
Preinstalled on an adjustable mounting
bracket to allow for proper and
consistent lamp positioning.
0
1
2
3
C. BALLAST - Thermally protected,
current controlled rapid start ballast,
will produce full light output, increase
lamp life with no noise and flicker.
6”
D. INSTALLATION - Four Preinstalled
spring clips which secure the housing
firmly into ceiling and accommodate
different ceiling thicknesses from 1/2"
to 1-3/8".
E. JUNCTION BOX - ETL listed for
feed through wiring and provided with
eight 1/2" KOs and four Romex
knockouts with strain relief.
ETL and C-ETL listed
Damp location.
Feed Through wiring.
ENERGY STAR Qualified models:
•
•
•
•
B6PLR-1X9-S-120
B6PLR-1X13-S-120
B6PLR-1X18-S-120
B6PLR-1X26-S-120
B6PLR
• B6PLR-1X32-S-120
• B6PLR-1X42-S-120
• B6PLR-1X26/32/42-S-120
- ITEM SELECTOR: (Please check the boxes below for the option desired)
WATTAGE
BALLAST
DIMMING
VOLTAGE
o9W
o(E)Electronic
oAdv-7
o MVOLT
(120/277)
13W
(M)
Magnetic
Adv-10
120
o
o
o
o
Star
18W
(S)
Energy
Lut-H
(FDB)
o
o
o
o277
o26W
oREB-DIM-120 o347
o32W
*See pages 96-108 for base type and wiring diagrams.
o42W
o26/32/42W(NEW)
1
3
4
2
4
6” COMPACT FLUORESCENT REMODEL HOUSING
6” COMPACT FLUORESCENT
NON-IC REMODEL HOUSING
AIR-SHUT
oAT
AT=AIR-SHUT
EMERGENCY OPTIONS
oEMG 750
oEMG 1300
oEMG-D-750
oICE-1300
5,6
(750 Lumens)
5,6
5,8
(1300 Lumens)
5,7
(750 Lumens)
OPTIONS
oFUSE
oRIF
9
10
(1300 Lumens)
F
L
U
O
R
E
S
C
E
N
T
(1=Electronic not available on 9W) (2=S=Electronic Energy Star Ballast, 120V) (3=Adv-7 not available on B6PL-9W) (4=Adv-10 and Lut-H(FDB) are not available on B6PL-9W, B6PL-13W) (5=See page 106-107 for more details)
(6-EMG=Emergency battery pack w/ remote test switch) (7-EMG-D=Emergency battery pack w/ remote test switch for damp location)
(8-ICE=Emergency battery pack w/ remote test switch operating between -18ºC and 55ºC) (9-FUSE=Single slow-blow fuse) (10-RIF=Radio interference filter)
1-877-375-5555
www.iuseelite.com
419