AIRCOM ® PLUS Characteristics
Diameter
10,3 mm
Impedance
50 Ohm
Attenuation @ 1 GHz/100m
13,4 dB
Attenuation @ 1 GHz/100ft
4,08 dB
fmax
10 GHz
AIRCELL® 7 Characteristics
Diameter
7,3 mm
Impedance
50 Ohm
Attenuation @ 1 GHz/100m
21,52 dB
Attenuation @ 1 GHz/100ft
4,08 dB
fmax
6 GHz
ECOFLEX® 10 Characteristics
ECOFLEX® 15 Characteristics
Diameter
Impedance
Attenuation @ 1 GHz/100m
Attenuation @ 1 GHz/100ft
fmax
Diameter
Impedance
Attenuation @ 1 GHz/100m
Attenuation @ 1 GHz/100ft
fmax
10,2 mm
50 Ohm
14,2 dB
4,33 dB
6 GHz
14,6 mm
50 Ohm
9,8 dB
2,99 dB
6 GHz
Cut your losses...
...with low loss coaxial cables
Over the past several years, there has been an increased demand for low loss
coaxial cables due to the intensive utilization of frequency spectrum well up into
the microwave regions.
All the cables that are presented in this brochure meet these requirements at a
very competitive price.
AIRCOM® PLUS with its unique air cell dielectric has become one of the most
popular multi-purpose coaxial cables since its introduction in 1989. A specially
designed honeycomb expander maintains the correct position of the center conductor while keeping the cable impedance constant even when it’s sharply bent.
This high quality, semi-air spaced cable can be used for applications up into the
10 GHz microwave region. Throughout its useable frequency range AIRCOM PLUS
achieves a remarkable low loss despite its small diameter of 10.3 mm (0.4
inches)
AIRCELL® 7 is an extremely flexible coaxial cable with a surprisingly low loss
even though its diameter is just 7.3mm (approx. 0.28 inch). Because of its 19
strand copper center conductor, a bending radius as small as 25 mm (approx. 1
inch) is allowed. This makes AIRCELL® 7 ideal for small to intermediate distances
or where limited space does not allow the use of larger diameter cables.
The ECOFLEX® family of coaxial cables is the number 1 choice when it comes
to flexibility, low loss and ease of use. IP 68 compliant solderless N-connectors
are available, thus allowing the manufacture of cable assemblies in minutes.
ECOFLEX® cables are the European wide industrial standard for general communications use. They are also ideally suited for use in the 2.4 GHz and 5 GHz
WLAN bands.
Precise coaxial connectors are an absolute necessity for long lasting trouble free
connections! For all the cables presented in this brochure, the most common
types of coaxial connectors are available. These specially designed connectors
feature:
• extended housings
• oversized gaskets for better sealing and above average strain relief
• no special tooling requirements.
Easy to read assembly instructions can be downloaded from the internet.
For long lasting high-quality connections, we strongly recommend using the
genuine AIRCELL® 7, AIRCOM® PLUS und ECOFLEX® coaxial connectors.
Low loss coaxial cable for radio communications
Characteristics
Diameter
Impedance
Attenuation @ 1 GHz/100m
Attenuation @ 1 GHz/100ft
fmax
10,3 mm
50 Ohm
13,4 dB
4,08 dB
10 GHz
AIRCOM PLUS® Connectors
AIRCOM PLUS® is a semi air spaced coaxial cable with excellent electric and mechanical properties. Its low-loss characteristics
makes it very suitable for applications up into the
microwave range.
Art.-Nr. 7367
N-plug, male
Art.-Nr. 7360
N-right angle connector
Art.-Nr. 7364
N-plug, female
Art.-Nr. 7379
BNC-plug, male
Art.-Nr. 7382
TNC-plug, male
Art.-Nr. 7384
TNC-RP-plug, male (reverse polarity)
Art.-Nr. 7378
UHF-plug, male
AIRCOM PLUS® features a unique PE-honeycomb expander which retains the correct impedance even when
sharply bent.
The expander provides a tight seal around the solid center
conductor which is made from oxygen free copper, thus
ensuring it is protected against moisture and corrosion.
Another feature of AIRCOM PLUS® is its double shielding
which is constructed of overlapping copperfoil plus an additional tightly woven copperbraid resulting in a screening
efficiency > 85 dB@1 GHz.
The copperfoil has an applied PE-coating which prevents
foil cracking due to short radius bends and the black PVCsheath of AIRCOM PLUS® is UV-stabilized.
AIRCOM PLUS® is the 1st choice when a low-loss microwave rated cable is required. It’s economical price
makes it the clear leader for today’s demanding applications.
AIRCOM PLUS® is available from stock in the
following standard drum sizes:
25m, 50m, 100m, 200m and 500m.
Technical data
Construction
Centre conductor
Centre conductor Ø
Dielectric
Dielectric Ø
Outer conductor 1
Shielding factor
Outer conductor 2
Sheath
Outer diameter Ø
AIRCOM PLUS® is a registered trademark of SSB-Electronic GmbH.
For your information
bare copper, oxygen free
1 x 2,7 mm
2,7 mm
semi airspaced PE
7,2 mm
copperfoil, PE coated
100%
copper braid, 75%
black PVC, uv-resistant
10,3 mm
Mechanical specifications
Weight (100 m)
15 kg
Min. bending radius
55 mm
Temperature range
- 40 .... + 80 °C
Pulling strength
5 daN
AIRCOM PLUS® RG 213/U
Capacity pF/m
81
Velocity factor
0,83
attenuation dB/100 m
10 MHz
1,2
100 MHz
3,8
500 MHz
9,0
1000 MHz
13,4
3000 MHz
25,9
RG 58/U
101
0,66
102
0,66
2,0
7,0
17,0
22,5
58,5
5,0
17,0
39,0
54,6
118
Attenuation (dB/100 m) @ 20°C
100 dB
10 dB
Electrical specifications
Impedance
50 Ohm
Capacity
81 pF/m
Velocity factor
0,83
f max
10 GHz
Screening efficiency @ 1 GHz
> 85 dB
DC-resistance
Centre conductor
3,1 Ohm/km
Outer conductor
6,4 Ohm/km
RF peak voltage
1 kV
Max. power handling (W @40°C)
10 MHz
100 MHz
500 MHz
1000 MHz
2000 MHz
3000 MHz
4000 MHz
1dB
0,1 dB
30
100
1000
Frequency (MHz)
10000
Return loss
3980
1210
510
340
180
150
110
0 dB
-5 dB
-10 dB
-15 dB
-20 dB
-25 dB
-30 dB
-35 dB
-40 dB
0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10,0
Typ. attenuation (dB/100m@20°C)
5 MHz
0,9
10 MHz
1,2
50 MHz
2,6
100 MHz
3,8
144 MHz
4,6
200 MHz
5,5
300 MHz
6,8
432 MHz
8,4
500 MHz
9,0
800 MHz
11,8
1000 MHz
13,4
1296 MHz
15,6
1500 MHz
17,0
1800 MHz
18,9
2000 MHz
20,1
2400 MHz
22,5
3000 MHz
25,9
4000 MHz
31,1
5000 MHz
35,9
6000 MHz
40,6
10000 MHz
58,3
dB/100ft @20°C
0,27
0,37
0,79
1,16
1,40
1,68
2,07
2,56
2,74
3,60
4,08
4,76
5,18
5,76
6,13
6,86
7,90
9,48
10,94
12,38
17,77
Frequency (GHz)
Due to production tolerances the RTL may have different characteristics
Accessories
Grounding clamp Art.-Nr. 6085
Low loss coaxial cable for radio communications
Characteristics
Diameter
Impedance
Attenuation @ 1 GHz/100m
Attenuation @ 1 GHz/100ft
fmax
7,3 mm
50 Ohm
21,52 dB
4,08 dB
6 GHz
AIRCELL® 7 Connectors
Art.-Nr. 7392
N-plug, male
Art.-Nr. 7399
N-right angle connector
Art.-Nr. 7393
N-plug, female
Art.-Nr. 7391
BNC-plug, male
Art.-Nr. 7396
TNC-plug, male
Art.-Nr. 7390
UHF-plug, male standard
Art.-Nr. 7394
UHF-plug, male prof.
AIRCELL® 7 is a super flexible coaxial
cable designed for frequencies up to 6 GHz.
At a diameter of just 7,3 mm ( (0.287” OD)
and a minimum bending radius of just 25 mm,
it offers relatively low loss.
The low attenuation of AIRCELL® 7 is achieved
through advanced manufacturing techniques and the
use of a PE-LLC dielectric with a foaming rate of more
than 70%.
The extreme flexibility of AIRCELL® 7 is further enhanced
through the use of a multi-stranded oxygen-free center conductor. Further advantages of this cable include the use of
double shielding which is constructed of overlapping copperfoil plus an additional tightly woven copperbraid. The copperfoil has an applied PE-coating which prevents foil cracking due
to short radius bends and the black PVC-sheath of AIRCELL® 7
is uv-stabilized.
A screening efficiency of > 85 dB@1GHz is realized.
AIRCELL® 7 is the right choice, when a super flexible, microwave rated cable is required. Its economical price makes it the
clear leader for today’s demanding application.
AIRCELL® 7 is available from stock in the following standard
drum sizes:
25m, 50m, 100m, 200m and 500m
Technical data
Construction
Centre conductor
Centre conductor Ø
Dielectric
Dielectric Ø
Outer conductor 1
Shielding factor
Outer conductor 2
Sheath
Outer diameter Ø
AIRCELL is a registered trademark of SSB-Electronic GmbH.
For your information
stranded copper, oxygen free
19 x 0,37 mm
1,85 mm
PE low loss compound
5,0 mm
copperfoil, PE coated
100%
copper braid, 70%
black PVC, uv-resistant
7,3 mm
Mechanical specifications
Weight (100 m)
7,2 kg
Min. bending radius
25 mm
Temperature range
- 30 .... + 80 °C
Pulling strength
2 daN
Capacity pF/m
Velocity factor
attenuation dB/100 m
10 MHz
100 MHz
500 MHz
1000 MHz
3000 MHz
AIRCELL® 7
RG 213/U
RG 58/U
75
0,83
101
0,66
102
0,66
2,2
6,28
14,72
21,52
40,88
2,0
7,0
17,0
22,5
58,5
5,0
17,0
39,0
54,6
118
Attenuation (dB/100 m) @ 20°C
100 dB
10 dB
Electrical specifications
Impedance
50 Ohm
Capacity
75 pF/m
Velocity factor
0,83
f max
6 GHz
Screening efficiency @ 1 GHz
> 83 dB
DC-resistance
Centre conductor
3,1 Ohm/km
Outer conductor
6,4 Ohm/km
RF peak voltage
1 kV
Max. power handling (W @40°C)
10 MHz
100 MHz
500 MHz
1000 MHz
2000 MHz
3000 MHz
Typ. attenuation (dB/100m@20°C)
5 MHz
1,6
10 MHz
2,2
50 MHz
4,52
100 MHz
6,28
144 MHz
7,6
200 MHz
9,04
300 MHz
11,2
432 MHz
13,6
500 MHz
14,72
800 MHz
19,0
1000 MHz
21,52
1296 MHz
24,84
1500 MHz
27,08
1800 MHz
30,0
2000 MHz
31,88
2400 MHz
35,6
3000 MHz
40,88
4000 MHz
49,12
5000 MHz
57,04
6000 MHz
64,9
1dB
0,1 dB
100
30
6000
1000
Frequency (MHz)
Return loss
2040
620
260
180
120
90
dB/100ft @20°C
0,49
0,67
1,38
1,91
2,32
2,75
3,41
4,15
4,49
5,79
6,56
7,57
8,26
9,15
9,72
10,85
12,46
14,98
17,39
19,79
0 dB
-5 dB
-10 dB
-15 dB
-20 dB
-25 dB
-30 dB
-35 dB
-40 dB
0,0 0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
5,5
6,0
Frequency (GHz)
Due to production tolerances the RTL may have different characteristics
Low loss coaxial cable for radio communications
Characteristics
Diameter
Impedance
Attenuation @ 1 GHz/100m
Attenuation @ 1 GHz/100ft
fmax
10,2 mm
50 Ohm
14,2 dB
4,33 dB
6 GHz
ECOFLEX® 10 Connectors
Art.-Nr. 7367
N-plug, male
Art.-Nr. 7383
N-plug, male, solderless
Art.-Nr. 7360
N-right angle connector
Art.-Nr. 7364
N-plug, female
Art.-Nr. 7379
BNC-plug, male
Art.-Nr. 7382
TNC-Stecker
Art.-Nr. 7384
TNC-RP-plug, male (reverse polarity)
Art.-Nr. 7378
UHF-plug, male
ECOFLEX 10 is a flexible, low-loss
coaxial cable specifically designed for
use up to 6 GHz.
Advanced manufacturing techniques combined
with the use of a low-loss PE-LLC Dielectric yields
a foaming rate of more than 70%. This results in
very low attenuation. ECOFLEX 10 sets a new standard among flexible coaxial cables.
The flexibility of ECOFLEX 10 is further enhanced through
the use of a stranded, oxygen-free copper center conductor.
Use of proprietary techniques, continuous center conductor
calibration and compression as well as the application of a
precoating results in low losses and good impedance matching.
Further advantages of the cable include the use of double
shielding which is constructed of overlapping copperfoil plus
an additional tight woven copper braid. A screening efficiency
of > 90 dB@ 1 GHz is realized.
The copperfoil has an applied PE-coating which prevents foil
cracking due to short radius bends.
The black PVC sheath of ECOFLEX 10 is uv-stabilized.
In addition to a full compliment of standard connectors, an
easy to use solder free N-connector has been specially
developed for ECOFLEX 10. Connector installation only takes
a few minutes and requires no special tools.
ECOFLEX 10 is the right choice when a low loss, highly
flexible microwave rated cable is required. It’s economical price makes it the clear leader for today’s demanding applications.
ECOFLEX 10 is available from stock in the
following standard drum sizes:
25m, 50m, 100m, 200m and 500m.
Technical data
Construction
Centre conductor
Centre conductor Ø
Dielectric
Dielectric Ø
Outer conductor 1
Shielding factor
Outer conductor 2
Sheath
Outer diameter Ø
ECOFLEX is a registered trademark of SSB-Electronic GmbH.
For your information
stranded copper, oxygen free
7 x 1,0 mm
2,85 mm
low loss compound PE
7,25 mm
copperfoil, PE coated
100%
copper braid, 72%
black PVC, uv-resistant
10,2 mm
Mechanical specifications
Weight (100 m)
13,1 kg
Min. bending radius
40 mm
Temperature range
- 40 .... + 85 °C
Pulling strength
5 daN
Electrical specifications
Impedance
50 Ohm
Capacity
78 pF/m
Velocity factor
0,85
f max
6 GHz
Screening efficiency @ 1 GHz
> 90 dB
DC-resistance
Centre conductor
3,3 Ohm/km
Outer conductor
8,4 Ohm/km
RF peak voltage
1 kV
Max. power handling (W @40°C)
10 MHz
100 MHz
500 MHz
1000 MHz
2000 MHz
3000 MHz
4000 MHz
5000 MHz
6000 MHz
Typ. attenuation (dB/100m@20°C)
5 MHz
0,8
10 MHz
1,2
50 MHz
2,8
100 MHz
4,0
144 MHz
4,9
200 MHz
5,8
300 MHz
7,3
432 MHz
8,9
500 MHz
9,6
800 MHz
12,5
1000 MHz
14,2
1296 MHz
16,5
1500 MHz
17,9
1800 MHz
19,9
2000 MHz
21,2
2400 MHz
23,6
3000 MHz
27,0
4000 MHz
32,2
5000 MHz
37,0
6000 MHz
41,5
ECOFLEX 10
Capacity pF/m
78
Velocity factor
0,85
attenuation dB/100 m
10 MHz
1,2
100 MHz
4,0
500 MHz
9,6
1000 MHz
14,2
3000 MHz
27,0
RG 213/U
RG 58/U
101
0,66
102
0,66
2,0
7,0
17,0
22,5
58,5
5,0
17,0
39,0
54,6
118
Attenuation (dB/100 m) @ 20°C
100 dB
10 dB
1dB
0,1 dB
30
100
1000
6000
Frequency (MHz)
3960
1210
510
350
230
180
150
130
120
dB/100ft @20°C
0,24
0,37
0,85
1,22
1,49
1,77
2,23
2,71
2,93
3,81
4,33
5,03
5,46
6,07
6,46
7,20
8,23
9,82
11,28
12,65
Return loss
0 dB
-5 dB
-10 dB
-15 dB
-20 dB
-25 dB
-30 dB
-35 dB
-40 dB
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
5,5
6,0
Frequency (GHz)
Due to production tolerances the RTL may have different characteristics
Accessories
Grounding clamp Art.-Nr. 6085
Low loss coaxial cable for radio communications
Characteristics
Diameter
Impedance
Attenuation @ 1 GHz/100m
Attenuation @ 1 GHz/100ft
fmax
14,6 mm
50 Ohm
9,8 dB
2,99 dB
6 GHz
ECOFLEX 15 is a flexible low-loss
coaxial cable for use in the frequency
range of DC - 6 GHz.
Its unique construction combines the low loss
properties found in non-flexible solid center
conductor hardline cables with the high flexibility
of cables manufactured with stranded center conductors.
Solder-free, high quality connectors in “N” and “7-16” have
been specially developed for ECOFLEX 15. Connector
installation only takes a few minutes and requires no special tools.
ECOFLEX 15 is available from stock in the following standard drum sizes:
25m, 50m, 100m, 200m and 500m.
Advanced manufacturing techniques combined with the
use of a PE-LLC Dielectric yields a foaming rate of more
than 70%, resulting in very low attenuation.
The use of continuous center conductor calibration and
compression as well as the application of a precoating guarantees low losses and stable impedance matching.
An EMI screening immunity of > 90 dB at 1.0 GHz is achieved through the use of double shielding which consists of
overlapping copper foil and an additional tight woven copperbraid. The copperfoil has an applied PE coating which
prevents foil cracking due to short radius bends.
The black PVC sheath of ECOFLEX 15 is uv-stabilized.
ECOFLEX 15 is the 1st choice when a low loss, highly
flexible microwave rated cable is required. It´s economical price makes ECOFLEX 15 the clear
leader for today´s demanding applications.
ECOFLEX® 15 Connectors
Art.-Nr. 7395
N-plug, male, solderless
Art.-Nr. 7397
N-plug, female, solderless
Art.-Nr. 7398
7/16 DIN-plug male, solderless
Technical data
Construction
Centre conductor
Centre conductor Ø
Dielectric
Dielectric Ø
Outer conductor 1
Shielding factor
Outer conductor 2
Sheath
Outer diameter Ø
ECOFLEX is a registered trademark of SSB-Electronic GmbH.
stranded copper, oxygen free
7 x 1,55 mm
4,5 mm
low loss compound PE
11,3 mm
copperfoil, PE coated
100%
copper braid, 72%
black PVC, uv-resistant
14,6 mm
Mechanical specifications
Weight (100 m)
25,8 kg
Min. bending radius
70 mm
Temperature range
- 40 .... + 85 °C
Pulling strength
12 daN
Electrical specifications
Impedance
50 Ohm
Capacity
77 pF/m
Velocity factor
0,86
f max
6 GHz
Screening efficiency @ 1 GHz
> 90 dB
DC-resistance
Centre conductor
1,56 Ohm/km
Outer conductor
5,15 Ohm/km
RF peak voltage
1,55 kV
For your informationation
ECOFLEX 15
Capacity pF/m
Velocity factor
attenuation dB/100 m
10 MHz
100 MHz
500 MHz
1000 MHz
3000 MHz
RG 213/U
RG 58/U
77
0,86
101
0,66
102
0,66
0,86
2,81
6,7
9,8
18,7
2,0
7,0
17,0
22,5
58,5
5,0
17,0
39,0
54,6
118
Attenuation (dB/100 m) @ 20°C
100 dB
10 dB
1dB
0,1 dB
6000
1000
100
30
Frequency (MHz)
Max. power handling (W @40°C)
10 MHz
100 MHz
500 MHz
1000 MHz
2000 MHz
3000 MHz
4000 MHz
6000 MHz
Typ. attenuation (dB/100m@20°C)
5 MHz
0,6
10 MHz
0,86
50 MHz
1,96
100 MHz
2,81
144 MHz
3,4
200 MHz
4,05
300 MHz
5,0
432 MHz
6,1
500 MHz
6,7
800 MHz
8,6
1000 MHz
9,8
1296 MHz
11,4
1500 MHz
12,4
1800 MHz
13,8
2000 MHz
14,7
2400 MHz
16,3
3000 MHz
18,7
4000 MHz
22,3
5000 MHz
25,7
6000 MHz
28,8
6450
1970
830
560
380
300
250
190
dB/100ft @20°C
0,18
0,26
0,60
0,86
1,04
1,23
1,52
1,86
2,04
2,62
2,99
3,48
3,78
4,21
4,48
4,97
5,70
6,80
7,84
8,78
Return loss
0 dB
-5 dB
-10 dB
-15 dB
-20 dB
-25 dB
-30 dB
-35 dB
-40 dB
0,0 0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
5,5
6,0
Frequency (GHz)
Due to production tolerances the RTL may have different characteristics
Accessories
Grounding clamp Art.-Nr. 6086
AIRCOM, AIRCELL, ECOFLEX
are registered trademark of SSB-Electronic GmbH.