SEETHELI
GHT
NOTTHEFI
XTURE
TABLE OF
CONTENTS
CONTOUR PROJECTOR
FESTOON LIGHTING STRIPS
FF SERIES
4-5
NC SERIES
6-7
RM SERIES
8-9
SM SERIES
10-11
TA SERIES
12-13
PROJECTOR SUPPLEMENT
14-17
TEMPLATE INSTRUCTIONS
18-19
FLOAT FINISH INSTRUCTIONS - ENGLISH
SEE THE LIGHT
NOT THE FIXTURE
20
FLOAT FINISH INSTRUCTIONS - SPANISH
21
PROJECTOR ORDER FORM
22
CLASSIC SERIES LIGHTING STRIPS
SEE THE LIGHT
NOT THE FIXTURE
AC SERIES
25-26
AE SERIES
27-28
CM SERIES
29-30
HM SERIES
31-32
TL SERIES
VM SERIES
33-34
35-36
TRANSFORMERS
37-38
SWATCHES
ORDER FORM
SEE THE LIGHT
NOT THE FIXTURE
39
40-41
ELITE SERIES LED LIGHTING STRIPS
SEE THE LIGHT
NOT THE FIXTURE
SEE THE LIGHT
NOT THE FIXTURE
AC SERIES
44-45
AE SERIES
46-47
CM SERIES
48-49
HM SERIES
50-51
TL SERIES
VM SERIES
52-53
54-55
DRIVERS
56-57
SWATCHES
ORDER FORM
58
59-60
ULTRA SERIES LED LIGHTING STRIPS
SEE THE LIGHT
NOT THE FIXTURE
AC SERIES
63-64
AE SERIES
65-66
CM SERIES
67-68
HM SERIES
69-70
TL SERIES
VM SERIES
71-72
73-74
DRIVERS
75-76
SWATCHES
ORDER FORM
TM
77
78-79
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TABLE OF
CONTENTS
FF SERIES
FLOAT FINISH HOUSING
CONTOUR PROJECTOR
FLOAT FINISH HOUSING
The Phantom Contour Projector FF Series (float finish or zero
sight line) housing is used for custom applications when attic access
may not be available but primarily when a visible cover plate would
be inappropriate for the ceiling finish. The result is an inconspicuous
penetration of the ceiling that is virtually invisible once installed and the
float ring is finished and painted to match the ceiling. Phantom Contour
Projectors are designed by a professional installer and have been
engineered so a novice, do it yourselfer or qualified electrican can
successfully perform a successful lighting installation. The patented
mounting method, simplified optical system and the ability to use
both shutters and custom templates make this one of the most
versatile and awesome low voltage art lighting fixtures on the market
today. By shaping the light to only the canvas, the art takes on a
“Lighted from within” look that can only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm
condensing lenses and two more 39mm, 75fl focal lenses standard
(150fl focal lenses, available for longer, narrower throws, are available
as a special order option.) See photometric chart on back of cut sheet
or projector supplement for more information regarding lens selection.
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing
is low profile and designed to accommodate the most demanding
application.
C
ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating
ring is flexible and designed for a full 360 degree rotation with four
positive locking knobs to secure the projector into position.
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845
US
MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this
universal cradle has multiple anchoring slots and a two-position pivot
option for both vertical and horizontal applications up to 55 degrees.
73355
ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an
electronic 120/12V step down power supply. Magnetic transformers and
277V options are available upon request. The junction box is listed for
branch circuit wiring and comes equipped with a thermal protector that
provides protection against over lamping and improper installation of
ceiling insulation. Thermal Protector meets NEC and UL requirements.
FLOAT PLATE: Constructed of .08 (#5052) aluminum, this low profile
plate is designed to be floated and textured to match the ceiling and
provide for access from below.
CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile
plate has a unique tapered edge, and adjustable glare shield, and matte
finish for a smooth ceiling transition.
ORDERING INFORMATION
ORDERING EXAMPLE:
TEMPLATE
ORDER CODE #
FLOAT FINISH HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
F F
1
1
1
R
FF
R
HOUSING
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
ORDER CODE #
Shutters
Metal Slide
Metal Gobo
Glass Gobo
1
2
3
4
U
MOUNT
DESCRIPTION
1
2
3
4
TRANSFORMER
ORDER CODE #
DESCRIPTION
U
DESCRIPTION
1
2
3
4
None
UV Filter
150fl Lenses
Pin Hole Cover
FF SERIES
4-5
NC SERIES
6-7
RM SERIES
8-9
SM SERIES
10-11
TA SERIES
12-13
PROJECTOR SUPPLEMENT
14-17
TEMPLATE INSTRUCTIONS
18-19
DESCRIPTION
R
Recessed
COLOR
ORDER CODE #
DESCRIPTION
U
Unfinished
Electronic 120V
Electronic 277V
Magnetic 120V
Magnetic 277V
OPTIONS
ORDER CODE #
COLOR
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
NC SERIES
NEW CONSTRUCTION
CONTOUR PROJECTOR
HOUSING
NEW CONSTRUCTION HOUSING
The Phantom Contour Projector NC Series (new construction housing)
is designed for installation prior to completion of a sheetrock ceiling.
Mounting bars are designed for joist spacing up to 24” wide and 10” high.
The round cover plate has a unique glare shield, tapered edge and matte
white finish for a smooth ceiling transition. Phantom art projector lights are
designed by a professional installer and have been engineered so a novice,
do it yourselfer or qualified electrican can successfully illuminate art. The
patented mounting method, simplified optical system and the ability to use
both shutters and custom templates make this one of the most versatile
and best art lighting fixtures on the market today. By shaping the light to
only the canvas, the art takes on a “Lighted from within” look that can
only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm
condensing lenses and two more 39mm, 75fl focal lenses standard
(150fl focal lenses, engineered for longer, narrower throws, are
available as a special order option.) See photometric chart on back of cut
sheet or projector supplement for more information regarding lens selection.
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is
low profile and designed to accommodate the most demanding application.
ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating
ring is flexible and designed for a full 360 degree rotation with four
positive locking knobs to secure the projector into position.
C
MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this
universal cradle has multiple anchoring slots and a two-position pivot
option for both vertical and horizontal applications up to 55 degrees.
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845
US
73355
MOUNTING BRACKETS: Constructed of 1/8” cold rolled steel, these
heavy-duty bars are designed to accommodate up to 24” joist spacing.
Commercial brackets are available by special order.
PLASTER RING: Constructed of .05 (#5052) aluminum, this feature is
designed for both drywall and plaster ceiling applications.
ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an
electronic 120/12V step down power supply. Magnetic transformers and
277V options are available upon request. The junction box is listed for
branch circuit wiring and comes equipped with a thermal protector that
provides protection against over lamping and improper installation of
ceiling insulation. Thermal Protector meets NEC and UL requirements.
CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile
plate has a unique tapered edge, and adjustable glare shield, and matte
finish for a smooth ceiling transition.
ORDERING INFORMATION
ORDERING EXAMPLE:
TEMPLATE
ORDER CODE #
NEW CONSTRUCTION HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
N C
1
1
1
R
NC
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
MOUNT
ORDER CODE #
DESCRIPTION
1
2
3
4
Shutters
Metal Slide
Metal Gobo
Glass Gobo
TRANSFORMER
ORDER CODE #
DESCRIPTION
W
1
2
3
4
R
HOUSING
DESCRIPTION
1
2
3
4
None
UV Filter
150fl Lenses
Pin Hole Cover
DESCRIPTION
R
Recessed
COLOR
ORDER CODE #
DESCRIPTION
W
B
C
U
Matte White
Matte Black
Custom
Unfinished
Electronic 120V
Electronic 277V
Magnetic 120V
Magnetic 277V
OPTIONS
ORDER CODE #
COLOR
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
RM SERIES
REMODELER HOUSING
CONTOUR PROJECTOR
REMODELER HOUSING
A first in the industry, the Phantom Contour Projector RM Series
(remodel housing) is specifically designed for installation between floors
and with minimal disruption to the ceiling. The low profile design permits
installation in existing ceilings with joists as shallow as 10 “ deep. The
round cover plate has a unique glare shield, tapered edge and matte
white finish for a smooth ceiling transition. Phantom recessed lighting
projectors are designed by a professional installer and have been
engineered so a novice, do it yourselfer or qualified electrican can
successfully illuminate art. The patented mounting method, precision
optical design and the ability to use both shutters and custom
templates make this one of the most versatile and awesome fine art
lighting fixtures manufactured on the market today. By shaping the light
to only the canvas, the art takes on a “Lighted from within” look that
can only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm
condensing lenses and two more 39mm, 75fl focal lenses
standard (150fl focal lenses, engineered for longer, narrower throws, are
available as a special order option.) See photometric chart on back of cut
sheet or projector supplement for more information regarding lens selection.
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is
low profile and designed to accommodate the most demanding application.
C
ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating
ring is flexible and designed for a full 360 degree rotation with four
positive locking knobs to secure the projector into position.
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845
US
MOUNTING FLANGE: Constructed of .08 (#5052) aluminum, this
universal cradle has multiple anchoring slots and a two-position pivot
option for both vertical and horizontal applications up to 55 degrees.
73355
MOUNTING CLIPS: Constructed of .08 (#5052) aluminum, these (4)
snap in right angle clips are designed to support the round housing and
secure the mounting flange and ceiling plate for ceilings up to 2” thick.
ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an
electronic 120/12V step down power supply. Magnetic transformers and
277V options are available upon request. The junction box is listed for
branch circuit wiring and comes equipped with a thermal protector that
provides protection against over lamping and improper installation of
ceiling insulation. Thermal Protector meets NEC and UL requirements.
CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile
plate has a unique tapered edge, and adjustable glare shield, and matte
finish for a smooth ceiling transition.
ORDERING INFORMATION
ORDERING EXAMPLE:
TEMPLATE
ORDER CODE #
REMODELER HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
R M
1
1
1
R
RM
HOUSING
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
MOUNT
ORDER CODE #
DESCRIPTION
1
2
3
4
Shutters
Metal Slide
Metal Gobo
Glass Gobo
TRANSFORMER
ORDER CODE #
DESCRIPTION
W
1
2
3
4
R
DESCRIPTION
1
2
3
4
None
UV Filter
150fl Lenses
Pin Hole Cover
DESCRIPTION
R
Recessed
COLOR
ORDER CODE #
DESCRIPTION
W
B
C
Matte White
Matte Black
Custom
Electronic 120V
Electronic 277V
Magnetic 120V
Magnetic 277V
OPTIONS
ORDER CODE #
COLOR
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
SM SERIES
SURFACE MOUNT
CONTOUR PROJECTOR
PROJECTOR
SURFACE MOUNT PROJECTOR
The Phantom Contour Projector SM Series (surface mount) is the
most economical, easy to install framing projector for lighting pictures
on the market today. The sleek design, precision optics and choice of
adjustable shutters or custom cut template make the Phantom Contour
Projector perfect for homes, offices, art galleries and fine restaurants.
The projector is available with either a Standard canopy or Low Profile
canopy. Custom Powdercoat finishes (Black or White) are available
options in addition to the standard finish. Phantom Contour Projectors
are designed by a professional installer and have been engineered so a
novice, do it yourselfer or qualified electrican can successfully illuminate
art. The patented mounting method, simplified optical system and the
ability to use both shutters and custom templates make this one of
the most versatile and easy to use lights for art gallery lighting on the
market today. By shaping the light to only the canvas, the art takes on a
“Lighted from within” look that can only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two
60mm condensing lenses and two more 39mm, 75fl focal lenses
standard (150fl focal lenses, engineered for longer, narrower throws, are
available as a special order option.) See photometric chart on back of
cut sheet or projector supplement for more information regarding lens
selection.
C
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845
US
MOUNTING ARM: Constructed of .08 (#5052) aluminum, this heavy
duty bracket and canopy are designed for a full 358 degree rotation and
features a threaded locking mechanism. For track applications the
canopy can be replaced with a pendant mount track adapter.
73355
MOUNTING CANOPY: Constructed of .08 (#5052) our aluminum
mounting canopies are available in two distinct profiles. The low
profile canopy is designed specifically for remote transformer
applications. The standard profile is designed to house the electronic
transformer and box wiring.
LOW PROFILE
CANOPY
TRANSFORMER: Located in the canopy the 120V step down
transformer to 12V is designed for easy installation. The electronic
transformer provides protection against over-lamping and short circuit
conditions. 277V available by special order.
STANDARD
CANOPY
ORDERING INFORMATION
ORDERING EXAMPLE:
TEMPLATE
ORDER CODE #
SURFACE MOUNT HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
MOUNT
ORDER CODE #
DESCRIPTION
1
2
3
4
Shutters
Metal Slide
Metal Gobo
Glass Gobo
S
L
T*
DESCRIPTION
Standard Canopy
Low Profile Canopy
Track*
*Specify Manufacturer
S M
1
1
1
S
TRANSFORMER
ORDER CODE #
DESCRIPTION
U
1
2
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
Electronic 120V
Electronic 277V
OPTIONS
ORDER CODE #
DESCRIPTION
1
2
3
None
UV Filter
150fl Lenses
SM
HOUSING
COLOR
COLOR
ORDER CODE #
DESCRIPTION
W
B
C
U
Matte White
Matte Black
Custom
Unfinished
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TA SERIES
TOP
ACCESS
CONTOUR PROJECTOR
HOUSING
DESCRIPTION
The Phantom Contour Projector TA Series (top access ONLY design)
is perfect for custom applications that require a smooth ceiling appearance
and attic access is available. This model is used when access from
below is not practical or you want to minimize the ceiling penetration
and will be performing a custom cut template installation similar to the
Wendel technique. Phantom Contour art projector lights are designed
by a professional installer and have been engineered so a novice, do
it yourselfer or qualified electrican can successfully illuminate art. The
patented mounting method, simplified projector optical design and the
custom cut template technique make this one of the most versatile
and awesome low voltage art lighting fixtures on the market today.
By shaping the light to only the canvas, the art takes on a “Lighted
from within” look that can only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two
60mm condensing lenses and two more 39mm, 75fl focal lenses
standard (150fl focal lenses, engineered for longer, narrower throws, are
available as a special order option.) See photometric chart on back of cut
sheet or projector supplement for more information regarding lens selection.
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is
low profile and designed to accommodate the most demanding application.
C
ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating
ring is flexible and designed for a full 360 degree rotation with four
positive locking knobs to secure the projector into position.
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845
US
MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this
universal cradle has three anchoring slots and multiple pivoting positions
for both vertical and horizontal applications up to 55 degrees.
73355
MOUNTING BRACKETS: Constructed of 1/8” cold rolled steel, these
heavy-duty bars are designed to accommodate up to 24” joist spacing.
Commercial brackets are available by special order.
ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an
electronic 120/12V step down power supply. Magnetic transformers and
277V options are available upon request. The junction box is listed for
branch circuit wiring and comes equipped with a thermal protector that
provides protection against over lamping and improper installation of
ceiling insulation. Thermal Protector meets NEC and UL requirements.
HEAT SHIELD: Constructed of .05 (#5052) aluminum this protective
disk has two easy to remove perforated knockouts to accommodate
both vertical and horizontal installations.
ORDERING INFORMATION
ORDERING EXAMPLE:
TEMPLATE
ORDER CODE #
TOP ACCESS HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
MOUNT
ORDER CODE #
DESCRIPTION
2
3
4
Metal Slide
Metal Gobo
Glass Gobo
TRANSFORMER
ORDER CODE #
DESCRIPTION
T A
2
1
1
R
TA
U
R
HOUSING
TEMPLATE
TRANSFORMER
OPTIONS
1
2
3
4
U
MOUNT
DESCRIPTION
1
2
3
4
None
UV Filter
150fl Lenses
Pin Hole Cover
DESCRIPTION
R
Recessed
COLOR
ORDER CODE #
DESCRIPTION
U
Unfinished
Electronic 120V
Electronic 277V
Magnetic 120V
Magnetic 277V
OPTIONS
ORDER CODE #
COLOR
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
PROJECTOR SUPPLEMENT
INSTRUCTION SHEET
PROJECTOR SUPPLEMENT FOR PHANTOMTM CONTOUR PROJECTORS
Please read all the instructions in this supplement before proceeding with the installation. This fixture is intended for
installation in accordance with the National Electric Codes regulations. To prevent electric shock, turn off electricity
at the fuse box before proceeding. These instructions are designed as a general overview and guide for a typical
installation. Retain these instructions for future needs and maintenance reference. FOR QUESTIONS REGARDING
YOUR APPLICATION CONTACT CUSTOMER SERVICE (MONDAY THRU FRIDAY 8:00 A.M. - 4:00 P.M. CST) TOLL
FREE 1-800-863-1184.
EXPLODED VIEW
1
2
3
4
5
6
Lamp
Assembly
Focal Lens Clip
19
20
18
Tapered Frontal Cone
Masking Ring
9
10
21
Focal Lens
Focal Lens Spacer
Focal Lens
Focal Cone (Towards Back)
Hose Clamp
7
8
17
16
Front Condensor Retainer
Condensor
Assembly
Back Condensor Tube
15
14
13
11
Single Convex Condensing Lens
12
Double Convex Condensing Lens
10
12
11
13
Condensor Spacer
14
Lamp Spring
15
16
17
9
Focal
Cone
Assembly
7
6
Projector Body
Back Condenser Retainer
Optional UV Filter
18
75MR16/FO Lamp
19
Lamp Spacer
20 Lamp Retainer Ring
8
21
Back Cap
5
4
3
12
C
US
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845 & OTHER US PATENTS PENDING
73355
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TEMPLATE INSTRUCTIONS
CUSTOM BRASS
CONTOUR PROJECTOR
TEMPLATE
INSTRUCTIONS
Cutting brass confinement templates has always been a mystery to most people trying
to install projectors and therefore left to professional installers, adding frustration and
cost to the project. The Phantom Contour Projector is designed with the installer in
mind and cutting confinement templates has never been easier. Sure, practice makes
perfect but that can only be made simpler by knowing the tricks of the trade.
FIgURE 1
The confinement template or brass slide is designed to allow you, the installer, to illuminate single objects, multiple objects and irregular shaped objects by cutting an
opening in the slide. Theoretically, as long at the object is within the projected field
of light, the object can be illuminated. However, there are limitations due to focusing
in extreme situations. Until you get your feet wet, keep things simple. Above all, remain
calm as this will be a frustrating experience the first time. After one or two, you’ll be
cutting templates like a pro. So take your time, take a deep breath, have some fun and
enjoy the results!
FIgURE 2a
Please refer to PROJECTOR SUPPLEMENT for selecting lenses and beam angles.
The following instructions address some basics steps of the template
cutting process:
1.
Orientation of brass slide in the projector
2. Orientation of brass slide when cutting
3. Finding target on the wall
4. Tracing the slide
5. Establishing straight lines
6. Cut one side at a time
7. Flexing the slide
8. Filing instead of cutting
9. Wedging the slide
FIgURE 2b
ORIENTATION OF SLIDE IN THE PROJECTOR — FIgURE 1
It is absolutely critical to the adjustment process that you install the brass slide correctly into the projector each time. Remember, that all projected light is upside
down and backwards. Don’t worry; I just want you to be aware of what is going on.
FIgURE 3a
Start by positioning the brass slide in the gate (between the black tapered frontal cone
and the silver template ring) with the notch on the top left, facing the art on the wall.
This will be your position every time you remove and reinstall the brass slide. Otherwise, you will cut the wrong side, spill the light onto the wall and have to start over. So
pay attention to this detail.
ORIENTATION OF BRASS SLIDE wHEN CUTTINg — FIgURE 2
Remove the brass slide from the projector and rotate the brass slide clockwise without flipping the slide. The notch should now be on the bottom right hand corner.
This will be your position every time you cut the brass slide. Otherwise, you will cut the
wrong side, spill the light onto the wall and have to start over. So pay attention to this
other important detail.
FIgURE 3b
Hint: I like to scribe on the brass slide with my scissors the letters T, L, R, and B for top,
left, right and bottom around the opening. This is a good safety net and reference point
when cutting. FIgURE 2b.
FINDINg TARgET ON THE wALL — FIgURE 3
Cutting a brass slide confinement template involves the trial and error method. That means you simply cut or punch a small hole in the brass slide to find
the target and or targets on the wall. Once you have positioned the light on the
art, make a few cuts to see what happens. The goal is to establish straight lines.
FIgURE 3c
Hint: This is also a good time to double check and set the focus. Double check and
tighten all mounting screws. Check that the cover plate fits flush with the ceiling and
does not hit the projector body or front cone. If so, you may have to reposition the
projector before cutting the brass slide.
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
FF GUIDE
FINISHING INSTRUCTIONS
ENGLISH INSTRUCTIONS
Aluminum
Mounting Flange
READ AND UNDERSTAND THESE INSTRUCTIONS
BEFORE INSTALLING FIXTURE.
This fixture is intended for installation in accordance
with National Electrical Code and local regulations. To
assure full compliance with local codes and regulations,
check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at
fuse box before proceeding. Retain these instructions
for maintenance reference.
Stud or
Wood Block
Floated Area
FLOATING
Apply first pass of drywall mud using only the
edge of aluminum ceiling plate out from the panel
approximately 8”-12”.
Floated Area
Note: Do not apply drywall mud or tape on surface
of ceiling plate.
We would suggest an 8”-12”
floated area for smooth
ceiling finish.
8”-12”
8”-12”
Apply a second pass of drywall mud and gradually
taper edge using a large drywall mud knife. Sand
smooth, apply texture, paint or wallpaper.
PAINTING AND FINISHING
Apply primer coat on all exposed metal areas of
Smooth
Tapered Edge
Primed
Metal Surface
ceiling plate before painting.
Recessed Groove
Remove glare sheild and center panel from finished
ceiling plate and paint separately.
FLOAT FINISH INSTRUCTIONS - ENGLISH
20
FLOAT FINISH INSTRUCTIONS - SPANISH
21
PROJECTOR ORDER FORM
22
Center Panel
Glare Sheild
(Optional)
Check edge of panel and ceiling plate and carefully
remove any excess paint buildup using a sharp knife.
Re-install center panel and optional glare shield
when paint is dry.
Finished
Ceiling
Appearance
Visible
Hairline Crack
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
GUIA FF
INSTRUCCIONES DE
INSTRUCCIONES ESPAÑOL
TERMINAR
El aluminio que
monta reborde
LEA Y ENTIENDA ESTOS INSTRUCCIONES ANTES
DE INSTAKAR INSTALACIÓN FIJA.
Esta instalación fija se inteded para la instalación de
acuerdo con Código Eléctrico Nacional y para las
regulaciones locales. Para asegurar la conformidad
repleta con códigos y regulaciones locales, cheque
con su inspector eléctrico antes de la instalación. Para
prevenir el golpe eléctrico, la vuelta de la electricidad
en caja de fusibles antes de avanzar. Retenga estas
instrucciones para la referencia de la conservación.
Tachone o el
bloque de Madera
Area flotada
FLOTANDO
Aplique primer capa de cemento de untas y cinta
usaando solamente la orilla bicelada del plato de
aluminio del techo.
Nota: No appliqué cemento de juntas ni cinta sobre
Area flotada
8”-12”
Sugerimos un 8”-12” flotó área para
el fin liso de techo
la superficie mas alta del plato de techo.
8”-12”
Aplique la segunda capa de cemento de juntas
y gradualmente disminuya la orilla usando una
spatula ancha. Arena, suaviza, aplica la textura, la
pintura o el papel pintado.
PINTURA Y TERMINAR
Aplique el abrigo más estirado en todas áreas
superficie más estirada de metal
la orilla estrechada liso
expuestas de metal de plato de techo antes de
pintar.
Quite
Ranura de
Recessed
deslumbre
el
protector
y
el
entrepaño
central
entrepaño
central del plato de techo ya instalado y pinte
Deslumbre el
protector
separadamente.
Verifique la orilla del plato de techo y quite con
cuidado cualquier aumento de pintura de exceso
apariencia
terminada de
techo
grieta fina
que utiliza un cuchillo agudo. Vuelva a instalar
entrepaño central y opcional deslumbra el protector
cuando pintura esta seca.
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ORDERING INFORMATION
DATE
P.O.#
JOB NAME
SHIP TO:
BILL TO:
COMPANY NAME
COMPANY NAME
ATTENTION
ATTENTION
ADDRESS
ADDRESS
CITY/STATE/ZIP
CITY/STATE/ZIP
PHONE
PHONE
AGENT
SPECIFIED BY
SHIPPING METHOD
£
GROUND
£
2ND DAY
£
OVERNIGHT
£
OTHER
SPECIAL INSTRUCTIONS
CONTOUR PROJECTOR ORDER FORM
QUANTITY
HOUSING
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
COLOR
CONTOUR PROJECTOR ORDER CODES
QTY.
HOUSING
ORDER CODE
RM - REMODELER
FF - FLOAT FINISH
TA - TOP ACCESS
NC - NEW CONSTRUCTION
SM - SURFACE MOUNT
TEMPLATE
ORDER CODE
1 - SHUTTERS
2 - METAL SLIDE
3 - METAL GOBO
4 - GLASS GOBO
TRANSFORMER
ORDER CODE
1 - ELECTRONIC 120V
2 - ELECTRONIC 277V
3 - MAGNETIC 120V
4 - MAGNETIC 277V
OPTIONS
ORDER CODE
1 - NONE
2 - UV FILTER
3 - 150FL LENSES
4 - PINHOLE COVER
MOUNT
ORDER CODE
COLOR
ORDER CODE
R - RECESSED
S - STANDARD CANOPY*
L - LOW PROFILE
CANOPY*
W - WHITE
U - UNFINISHED
W - MATTE WHITE*
B - MATTE BLACK*
* SURFACE MOUNT ONLY
* SURFACE MOUNT ONLY
E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
OUR OTHER PRODUCTS
SEE THE LIGHT
SEE THE LIGHT
NOT THE FIXTURE
NOT THE FIXTURE
TM
SEE THE LIGHT
NOT THE FIXTURE
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
FF SERIES
FLOAT FINISH HOUSING
CONTOUR PROJECTOR
FLOAT FINISH HOUSING
The Phantom Contour Projector FF Series (float finish or zero
sight line) housing is used for custom applications when attic access
may not be available but primarily when a visible cover plate would
be inappropriate for the ceiling finish. The result is an inconspicuous
penetration of the ceiling that is virtually invisible once installed and the
float ring is finished and painted to match the ceiling. Phantom Contour
Projectors are designed by a professional installer and have been
engineered so a novice, do it yourselfer or qualified electrican can
successfully perform a successful lighting installation. The patented
mounting method, simplified optical system and the ability to use
both shutters and custom templates make this one of the most
versatile and awesome low voltage art lighting fixtures on the market
today. By shaping the light to only the canvas, the art takes on a
“Lighted from within” look that can only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm
condensing lenses and two more 39mm, 75fl focal lenses standard
(150fl focal lenses, available for longer, narrower throws, are available
as a special order option.) See photometric chart on back of cut sheet
or projector supplement for more information regarding lens selection.
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing
is low profile and designed to accommodate the most demanding
application.
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
US
U.S. PATENT #6,832,845
C
73355
ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating
ring is flexible and designed for a full 360 degree rotation with four
positive locking knobs to secure the projector into position.
MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this
universal cradle has multiple anchoring slots and a two-position pivot
option for both vertical and horizontal applications up to 55 degrees.
ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an
electronic 120/12V step down power supply. Magnetic transformers and
277V options are available upon request. The junction box is listed for
branch circuit wiring and comes equipped with a thermal protector that
provides protection against over lamping and improper installation of
ceiling insulation. Thermal Protector meets NEC and UL requirements.
FLOAT PLATE: Constructed of .08 (#5052) aluminum, this low profile
plate is designed to be floated and textured to match the ceiling and
provide for access from below.
CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile
plate has a unique tapered edge, and adjustable glare shield, and matte
finish for a smooth ceiling transition.
ORDERING INFORMATION
ORDERING EXAMPLE:
FLOAT FINISH HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
F F
1
1
1
FF
HOUSING
TEMPLATE
TRANSFORMER
OPTIONS
R
U
R
U
MOUNT
COLOR
TM
TEMPLATE
ORDER CODE #
DESCRIPTION
1
2
3
4
Shutters
Metal Slide
Metal Gobo
Glass Gobo
TRANSFORMER
ORDER CODE #
DESCRIPTION
1
2
3
4
Electronic 120V
Electronic 277V
Magnetic 120V
Magnetic 277V
OPTIONS
ORDER CODE #
DESCRIPTION
1
2
3
4
None
UV Filter
150fl Lenses
Pin Hole Cover
MOUNT
ORDER CODE #
DESCRIPTION
R
Recessed
COLOR
ORDER CODE #
DESCRIPTION
U
Unfinished
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DETERMINE LOCATION OF PROJECTOR IN CEILING
VERTICAL AIMING AT 45o ANGLE
FORMULA
HORIZONTAL BEAM
(Standard 75fl Lenses)
D
Painting Size
(60”H x 50”W @ 36” from ceiling)
C
Estimate the
distance from
projector to the
area being
illuminated.
C = Distance from ceiling to top of art
D = Distance from wall
C + 1/2 of art height + 6 = D
ART
HT.
D
ART
HT.
FC
Select a slightly
larger size of spot
from chart above
to ensure
coverage.
(Example: 36” + 30” + 6” = 72” or 6’ back from wall)
Your circle of light on the wall will be 63”
Approximately 43 foot candles of light*
C
D
*See grey shaded area in photometrics chart
SPOT SIZE
PHOTOMETRICS
STANDARD 75 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
2’
BEAM
SPREAD
SPOT
SIZE
(IN.)
43o
3’
FC
SPOT
SIZE
(IN.)
20
456
58o
26
67o
77o
4’
FC
SPOT
SIZE
(IN.)
30
186
269
44
31
206
47
117
6’
FC
SPOT
SIZE
(IN.)
42
99
121
53
47
96
70
52
OPTIONAL 150 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
10’
8’
FC
SPOT
SIZE
(IN.)
63
43
70
71
62
55
91
30
2’
FC
SPOT
SIZE
(IN.)
FC
BEAM
SPREAD
75
24
107
14
31o
33
106
18
120
12
102
25
128
14
156
120
14
154
8
190
SPOT
SIZE
(IN.)
3’
4’
FC
SPOT
SIZE
(IN.)
11 1850 18
840
32o
12 1300
19
9
35o
5
36o
6’
FC
SPOT
SIZE
(IN.)
27
200
450
30
13 1100 22
420
14 1000
384
FC
SPOT
SIZE
(IN.)
23
10’
8’
FC
SPOT
SIZE
(IN.)
FC
SPOT
SIZE
(IN.)
FC
38
150
53
75
67
42
150
39
120
55
55
70
34
32
135
43
100
61
50
79
31
33
129
46
91
63
49
81
30
HOUSING AND PROJECTOR DIMENSIONS
HOUSING DIMENSIONS
MAGNETIC
TRANSFORMER
5 3/8”
TOP VIEW
12”
12”
9”
PROJECTOR DIMENSIONS
3 1/2"
12”
18” Diameter
12”
1 1/2" - 2 1/2"
3 1/2”
ELECTRONIC
TRANSFORMER
8 7/8"
1 1/2"
11 1/4”
18”
TEMPLATE METHODS
ADJUSTABLE SHUTTERS
METAL SLIDE
METAL GOBO
GLASS GOBO
Each Phantom Projector comes
with 3 different shutter assemblies that are specially designed to
compliment a particular beam
configuration by adjusting the light to
follow the curvature of the lens. This
allows for clean, straight lines, regardless of the aiming angle.
A Metal Slide is used on custom
cut templates that contour the light
to multiple or irregular objects such
as sculptures. To illuminate multiple
objects on the same wall they must
be installed in a collage format.
A Metal Gobo is used for projecting
black and white images or patterns to
create a theatrical effect such as clouds,
leaves or structural shapes. Manufactured like a stencil, all elements of the
metal gobo design must be connected
with tabs to the outer ring of the gobo.
Over 700 patterns are available.
A Glass Gobo is used for projecting
color images, patterns or logos to create a refined and professional look. Silk
Screened Glass Gobos are made on
quartz glass using a unique coating silk
screened onto the base from digital files.
This “painted” coating allows your design
to avoid “tabbing” needed in custom
steel gobos.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
NC SERIES
NEW CONSTRUCTION
CONTOUR PROJECTOR
HOUSING
NEW CONSTRUCTION HOUSING
The Phantom Contour Projector NC Series (new construction housing)
is designed for installation prior to completion of a sheetrock ceiling.
Mounting bars are designed for joist spacing up to 24” wide and 10” high.
The round cover plate has a unique glare shield, tapered edge and matte
white finish for a smooth ceiling transition. Phantom art projector lights are
designed by a professional installer and have been engineered so a novice,
do it yourselfer or qualified electrican can successfully illuminate art. The
patented mounting method, simplified optical system and the ability to use
both shutters and custom templates make this one of the most versatile
and best art lighting fixtures on the market today. By shaping the light to
only the canvas, the art takes on a “Lighted from within” look that can
only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm
condensing lenses and two more 39mm, 75fl focal lenses standard
(150fl focal lenses, engineered for longer, narrower throws, are
available as a special order option.) See photometric chart on back of cut
sheet or projector supplement for more information regarding lens selection.
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is
low profile and designed to accommodate the most demanding application.
ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating
ring is flexible and designed for a full 360 degree rotation with four
positive locking knobs to secure the projector into position.
C
US
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845
73355
MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this
universal cradle has multiple anchoring slots and a two-position pivot
option for both vertical and horizontal applications up to 55 degrees.
MOUNTING BRACKETS: Constructed of 1/8” cold rolled steel, these
heavy-duty bars are designed to accommodate up to 24” joist spacing.
Commercial brackets are available by special order.
PLASTER RING: Constructed of .05 (#5052) aluminum, this feature is
designed for both drywall and plaster ceiling applications.
ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an
electronic 120/12V step down power supply. Magnetic transformers and
277V options are available upon request. The junction box is listed for
branch circuit wiring and comes equipped with a thermal protector that
provides protection against over lamping and improper installation of
ceiling insulation. Thermal Protector meets NEC and UL requirements.
CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile
plate has a unique tapered edge, and adjustable glare shield, and matte
finish for a smooth ceiling transition.
ORDERING INFORMATION
ORDERING EXAMPLE:
NEW CONSTRUCTION HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
N C
1
1
1
NC
HOUSING
R
W
R
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
TM
COLOR
TEMPLATE
ORDER CODE #
DESCRIPTION
1
2
3
4
Shutters
Metal Slide
Metal Gobo
Glass Gobo
TRANSFORMER
ORDER CODE #
DESCRIPTION
1
2
3
4
Electronic 120V
Electronic 277V
Magnetic 120V
Magnetic 277V
OPTIONS
ORDER CODE #
DESCRIPTION
1
2
3
4
None
UV Filter
150fl Lenses
Pin Hole Cover
MOUNT
ORDER CODE #
DESCRIPTION
R
Recessed
COLOR
ORDER CODE #
DESCRIPTION
W
B
C
U
Matte White
Matte Black
Custom
Unfinished
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DETERMINE LOCATION OF PROJECTOR IN CEILING
VERTICAL AIMING AT 45o ANGLE
FORMULA
HORIZONTAL BEAM
(Standard 75fl Lenses)
D
Painting Size
(60”H x 50”W @ 36” from ceiling)
C
Estimate the
distance from
projector to the
area being
illuminated.
C = Distance from ceiling to top of art
D = Distance from wall
C + 1/2 of art height + 6 = D
ART
HT.
D
ART
HT.
FC
Select a slightly
larger size of spot
from chart above
to ensure
coverage.
(Example: 36” + 30” + 6” = 72” or 6’ back from wall)
Your circle of light on the wall will be 63”
Approximately 43 foot candles of light*
C
D
*See grey shaded area in photometrics chart
SPOT SIZE
PHOTOMETRICS
STANDARD 75 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
2’
BEAM
SPREAD
SPOT
SIZE
(IN.)
43o
3’
FC
SPOT
SIZE
(IN.)
20
456
58o
26
67o
77o
4’
FC
SPOT
SIZE
(IN.)
30
186
269
44
31
206
47
117
6’
FC
SPOT
SIZE
(IN.)
42
99
121
53
47
96
70
52
OPTIONAL 150 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
10’
8’
FC
SPOT
SIZE
(IN.)
63
43
70
71
62
55
91
30
2’
FC
SPOT
SIZE
(IN.)
FC
BEAM
SPREAD
75
24
107
14
31o
33
106
18
120
12
102
25
128
14
156
120
14
154
8
190
SPOT
SIZE
(IN.)
3’
4’
FC
SPOT
SIZE
(IN.)
11 1850 18
840
32o
12 1300
19
9
35o
5
36o
6’
FC
SPOT
SIZE
(IN.)
27
200
450
30
13 1100 22
420
14 1000
384
FC
SPOT
SIZE
(IN.)
23
10’
8’
FC
SPOT
SIZE
(IN.)
FC
SPOT
SIZE
(IN.)
FC
38
150
53
75
67
42
150
39
120
55
55
70
34
32
135
43
100
61
50
79
31
33
129
46
91
63
49
81
30
HOUSING AND PROJECTOR DIMENSIONS
HOUSING DIMENSIONS
12"
TOP VIEW
12"
12"
PROJECTOR DIMENSIONS
MAGNETIC
TRANSFORMER
5 3/8”
3 1/2"
9"
12"
1 1/2" - 2 1/2"
3 1/2”
ELECTRONIC
TRANSFORMER
8 7/8"
1 1/2"
13 1/8" DIA.
TEMPLATE METHODS
ADJUSTABLE SHUTTERS
METAL SLIDE
METAL GOBO
GLASS GOBO
Each Phantom Projector comes
with 3 different shutter assemblies that are specially designed to
compliment a particular beam
configuration by adjusting the light to
follow the curvature of the lens. This
allows for clean, straight lines, regardless of the aiming angle.
A Metal Slide is used on custom
cut templates that contour the light
to multiple or irregular objects such
as sculptures. To illuminate multiple
objects on the same wall they must
be installed in a collage format.
A Metal Gobo is used for projecting
black and white images or patterns to
create a theatrical effect such as clouds,
leaves or structural shapes. Manufactured like a stencil, all elements of the
metal gobo design must be connected
with tabs to the outer ring of the gobo.
Over 700 patterns are available.
A Glass Gobo is used for projecting
color images, patterns or logos to create a refined and professional look. Silk
Screened Glass Gobos are made on
quartz glass using a unique coating silk
screened onto the base from digital files.
This “painted” coating allows your design
to avoid “tabbing” needed in custom
steel gobos.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
RM SERIES
REMODELER HOUSING
CONTOUR PROJECTOR
REMODELER HOUSING
A first in the industry, the Phantom Contour Projector RM Series
(remodel housing) is specifically designed for installation between floors
and with minimal disruption to the ceiling. The low profile design permits
installation in existing ceilings with joists as shallow as 10 “ deep. The
round cover plate has a unique glare shield, tapered edge and matte
white finish for a smooth ceiling transition. Phantom recessed lighting
projectors are designed by a professional installer and have been
engineered so a novice, do it yourselfer or qualified electrican can
successfully illuminate art. The patented mounting method, precision
optical design and the ability to use both shutters and custom
templates make this one of the most versatile and awesome fine art
lighting fixtures manufactured on the market today. By shaping the light
to only the canvas, the art takes on a “Lighted from within” look that
can only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two 60mm
condensing lenses and two more 39mm, 75fl focal lenses
standard (150fl focal lenses, engineered for longer, narrower throws, are
available as a special order option.) See photometric chart on back of cut
sheet or projector supplement for more information regarding lens selection.
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is
low profile and designed to accommodate the most demanding application.
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
US
U.S. PATENT #6,832,845
C
73355
ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating
ring is flexible and designed for a full 360 degree rotation with four
positive locking knobs to secure the projector into position.
MOUNTING FLANGE: Constructed of .08 (#5052) aluminum, this
universal cradle has multiple anchoring slots and a two-position pivot
option for both vertical and horizontal applications up to 55 degrees.
MOUNTING CLIPS: Constructed of .08 (#5052) aluminum, these (4)
snap in right angle clips are designed to support the round housing and
secure the mounting flange and ceiling plate for ceilings up to 2” thick.
ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an
electronic 120/12V step down power supply. Magnetic transformers and
277V options are available upon request. The junction box is listed for
branch circuit wiring and comes equipped with a thermal protector that
provides protection against over lamping and improper installation of
ceiling insulation. Thermal Protector meets NEC and UL requirements.
CEILING PLATE: Constructed of .06 (#5052) aluminum this low profile
plate has a unique tapered edge, and adjustable glare shield, and matte
finish for a smooth ceiling transition.
ORDERING INFORMATION
ORDERING EXAMPLE:
REMODELER HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
R M
1
1
1
RM
HOUSING
R
W
R
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
TM
COLOR
TEMPLATE
ORDER CODE #
DESCRIPTION
1
2
3
4
Shutters
Metal Slide
Metal Gobo
Glass Gobo
TRANSFORMER
ORDER CODE #
DESCRIPTION
1
2
3
4
Electronic 120V
Electronic 277V
Magnetic 120V
Magnetic 277V
OPTIONS
ORDER CODE #
DESCRIPTION
1
2
3
4
None
UV Filter
150fl Lenses
Pin Hole Cover
MOUNT
ORDER CODE #
DESCRIPTION
R
Recessed
COLOR
ORDER CODE #
DESCRIPTION
W
B
C
Matte White
Matte Black
Custom
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DETERMINE LOCATION OF PROJECTOR IN CEILING
VERTICAL AIMING AT 45o ANGLE
FORMULA
HORIZONTAL BEAM
(Standard 75fl Lenses)
D
Painting Size
(60”H x 50”W @ 36” from ceiling)
C
Estimate the
distance from
projector to the
area being
illuminated.
C = Distance from ceiling to top of art
D = Distance from wall
C + 1/2 of art height + 6 = D
ART
HT.
D
ART
HT.
FC
Select a slightly
larger size of spot
from chart above
to ensure
coverage.
(Example: 36” + 30” + 6” = 72” or 6’ back from wall)
Your circle of light on the wall will be 63”
Approximately 43 foot candles of light*
C
D
*See grey shaded area in photometrics chart
SPOT SIZE
PHOTOMETRICS
STANDARD 75 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
2’
BEAM
SPREAD
SPOT
SIZE
(IN.)
43o
3’
FC
SPOT
SIZE
(IN.)
20
456
58o
26
67o
77o
4’
FC
SPOT
SIZE
(IN.)
30
186
269
44
31
206
47
117
6’
FC
SPOT
SIZE
(IN.)
42
99
121
53
47
96
70
52
OPTIONAL 150 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
10’
8’
FC
SPOT
SIZE
(IN.)
63
43
70
71
62
55
91
30
2’
FC
SPOT
SIZE
(IN.)
FC
BEAM
SPREAD
75
24
107
14
31o
33
106
18
120
12
102
25
128
14
156
120
14
154
8
190
SPOT
SIZE
(IN.)
3’
4’
FC
SPOT
SIZE
(IN.)
11 1850 18
840
32o
12 1300
19
9
35o
5
36o
6’
FC
SPOT
SIZE
(IN.)
27
200
450
30
13 1100 22
420
14 1000
384
FC
SPOT
SIZE
(IN.)
23
10’
8’
FC
SPOT
SIZE
(IN.)
FC
SPOT
SIZE
(IN.)
FC
38
150
53
75
67
42
150
39
120
55
55
70
34
32
135
43
100
61
50
79
31
33
129
46
91
63
49
81
30
HOUSING AND PROJECTOR DIMENSIONS
HOUSING DIMENSIONS
TOP VIEW
12 1/8”
11 1/8”
11 1/8" DIA.
MAGNETIC
TRANSFORMER
5 3/8”
PROJECTOR DIMENSIONS
3 1/2"
1 1/2" - 2 1/2"
3 1/2”
ELECTRONIC
TRANSFORMER
9 5/8"
8 7/8"
13 1/8" DIA.
1 1/2"
TEMPLATE METHODS
ADJUSTABLE SHUTTERS
METAL SLIDE
METAL GOBO
GLASS GOBO
Each Phantom Projector comes
with 3 different shutter assemblies that are specially designed to
compliment a particular beam
configuration by adjusting the light to
follow the curvature of the lens. This
allows for clean, straight lines, regardless of the aiming angle.
A Metal Slide is used on custom
cut templates that contour the light
to multiple or irregular objects such
as sculptures. To illuminate multiple
objects on the same wall they must
be installed in a collage format.
A Metal Gobo is used for projecting
black and white images or patterns to
create a theatrical effect such as clouds,
leaves or structural shapes. Manufactured like a stencil, all elements of the
metal gobo design must be connected
with tabs to the outer ring of the gobo.
Over 700 patterns are available.
A Glass Gobo is used for projecting
color images, patterns or logos to create a refined and professional look. Silk
Screened Glass Gobos are made on
quartz glass using a unique coating silk
screened onto the base from digital files.
This “painted” coating allows your design
to avoid “tabbing” needed in custom
steel gobos.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
SM SERIES
SURFACE MOUNT
CONTOUR PROJECTOR
PROJECTOR
SURFACE MOUNT PROJECTOR
The Phantom Contour Projector SM Series (surface mount) is the
most economical, easy to install framing projector for lighting pictures
on the market today. The sleek design, precision optics and choice of
adjustable shutters or custom cut template make the Phantom Contour
Projector perfect for homes, offices, art galleries and fine restaurants.
The projector is available with either a Standard canopy or Low Profile
canopy. Custom Powdercoat finishes (Black or White) are available
options in addition to the standard finish. Phantom Contour Projectors
are designed by a professional installer and have been engineered so a
novice, do it yourselfer or qualified electrican can successfully illuminate
art. The patented mounting method, simplified optical system and the
ability to use both shutters and custom templates make this one of
the most versatile and easy to use lights for art gallery lighting on the
market today. By shaping the light to only the canvas, the art takes on a
“Lighted from within” look that can only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two
60mm condensing lenses and two more 39mm, 75fl focal lenses
standard (150fl focal lenses, engineered for longer, narrower throws, are
available as a special order option.) See photometric chart on back of
cut sheet or projector supplement for more information regarding lens
selection.
C
US
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
MOUNTING ARM: Constructed of .08 (#5052) aluminum, this heavy
duty bracket and canopy are designed for a full 358 degree rotation and
features a threaded locking mechanism. For track applications the
canopy can be replaced with a pendant mount track adapter.
73355
MOUNTING CANOPY: Constructed of .08 (#5052) our aluminum
mounting canopies are available in two distinct profiles. The low
profile canopy is designed specifically for remote transformer
applications. The standard profile is designed to house the electronic
transformer and box wiring.
LOW PROFILE
CANOPY
TRANSFORMER: Located in the canopy the 120V step down
transformer to 12V is designed for easy installation. The electronic
transformer provides protection against over-lamping and short circuit
conditions. 277V available by special order.
STANDARD
CANOPY
ORDERING INFORMATION
ORDERING EXAMPLE:
SURFACE MOUNT HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
TEMPLATE
ORDER CODE #
DESCRIPTION
1
2
3
4
Shutters
Metal Slide
Metal Gobo
Glass Gobo
MOUNT
ORDER CODE #
S
L
T*
DESCRIPTION
Standard Canopy
Low Profile Canopy
Track*
*Specify Manufacturer
S M
1
1
1
S
U
SM
HOUSING
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
TM
COLOR
TRANSFORMER
ORDER CODE #
DESCRIPTION
1
2
Electronic 120V
Electronic 277V
OPTIONS
ORDER CODE #
DESCRIPTION
1
2
3
None
UV Filter
150fl Lenses
COLOR
ORDER CODE #
DESCRIPTION
W
B
C
U
Matte White
Matte Black
Custom
Unfinished
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DETERMINE LOCATION OF PROJECTOR IN CEILING
VERTICAL AIMING AT 45o ANGLE
FORMULA
HORIZONTAL BEAM
(Standard 75fl Lenses)
D
Painting Size
(60”H x 50”W @ 36” from ceiling)
C
Estimate the
distance from
projector to the
area being
illuminated.
C = Distance from ceiling to top of art
D = Distance from wall
C + 1/2 of art height + 6 = D
ART
HT.
D
ART
HT.
FC
Select a slightly
larger size of spot
from chart above
to ensure
coverage.
(Example: 36” + 30” + 6” = 72” or 6’ back from wall)
Your circle of light on the wall will be 63”
Approximately 43 foot candles of light*
C
D
*See grey shaded area in photometrics chart
SPOT SIZE
PHOTOMETRICS
STANDARD 75 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
2’
BEAM
SPREAD
SPOT
SIZE
(IN.)
43o
3’
FC
SPOT
SIZE
(IN.)
20
456
58o
26
67o
77o
4’
FC
SPOT
SIZE
(IN.)
30
186
269
44
31
206
47
117
6’
FC
SPOT
SIZE
(IN.)
42
99
121
53
47
96
70
52
OPTIONAL 150 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
10’
8’
FC
SPOT
SIZE
(IN.)
63
43
70
71
62
55
91
30
2’
FC
SPOT
SIZE
(IN.)
FC
BEAM
SPREAD
75
24
107
14
31o
33
106
18
120
12
102
25
128
14
156
120
14
154
8
190
SPOT
SIZE
(IN.)
3’
4’
FC
SPOT
SIZE
(IN.)
11 1850 18
840
32o
12 1300
19
9
35o
5
36o
6’
FC
SPOT
SIZE
(IN.)
27
200
450
30
13 1100 22
420
14 1000
384
FC
SPOT
SIZE
(IN.)
23
10’
8’
FC
SPOT
SIZE
(IN.)
FC
SPOT
SIZE
(IN.)
FC
38
150
53
75
67
42
150
39
120
55
55
70
34
32
135
43
100
61
50
79
31
33
129
46
91
63
49
81
30
HOUSING AND PROJECTOR DIMENSIONS
PROJECTOR DIMENSIONS
SIDE VIEW - STANDARD CANOPY
FRONT VIEW - LOW PROFILE CANOPY
5"
3 1/2"
1 1/2" - 2 1/2"
1”
7 1/2”
5 1/2”
8”
8 7/8"
1 1/2"
4"
TEMPLATE METHODS
ADJUSTABLE SHUTTERS
METAL SLIDE
METAL GOBO
GLASS GOBO
Each Phantom Projector comes
with 3 different shutter assemblies that are specially designed to
compliment a particular beam
configuration by adjusting the light to
follow the curvature of the lens. This
allows for clean, straight lines, regardless of the aiming angle.
A Metal Slide is used on custom
cut templates that contour the light
to multiple or irregular objects such
as sculptures. To illuminate multiple
objects on the same wall they must
be installed in a collage format.
A Metal Gobo is used for projecting
black and white images or patterns to
create a theatrical effect such as clouds,
leaves or structural shapes. Manufactured like a stencil, all elements of the
metal gobo design must be connected
with tabs to the outer ring of the gobo.
Over 700 patterns are available.
A Glass Gobo is used for projecting
color images, patterns or logos to create a refined and professional look. Silk
Screened Glass Gobos are made on
quartz glass using a unique coating silk
screened onto the base from digital files.
This “painted” coating allows your design
to avoid “tabbing” needed in custom
steel gobos.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TA SERIES
TOP
ACCESS
HOUSING
CONTOUR PROJECTOR
DESCRIPTION
The Phantom Contour Projector TA Series (top access ONLY design)
is perfect for custom applications that require a smooth ceiling appearance
and attic access is available. This model is used when access from
below is not practical or you want to minimize the ceiling penetration
and will be performing a custom cut template installation similar to the
Wendel technique. Phantom Contour art projector lights are designed
by a professional installer and have been engineered so a novice, do
it yourselfer or qualified electrican can successfully illuminate art. The
patented mounting method, simplified projector optical design and the
custom cut template technique make this one of the most versatile
and awesome low voltage art lighting fixtures on the market today.
By shaping the light to only the canvas, the art takes on a “Lighted
from within” look that can only be seen to appreciate.
SPECIFICATIONS/FEATURES
PROJECTOR: Constructed of .25 (SCH40) aluminum with two
60mm condensing lenses and two more 39mm, 75fl focal lenses
standard (150fl focal lenses, engineered for longer, narrower throws, are
available as a special order option.) See photometric chart on back of cut
sheet or projector supplement for more information regarding lens selection.
LAMP: MR16 75-watt, 12-volt dichroic halogen lamp, 2-pin GU5.3 base
with average lamp life of 3500 hours and color temperature of 3000K.
Lamp Code: JCR12V-75W/FO
HOUSING: Constructed of .06 (#5052) aluminum, this sturdy housing is
low profile and designed to accommodate the most demanding application.
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
US
U.S. PATENT #6,832,845
C
73355
ROTATING RING: Constructed of .08 (#5052) aluminum, this rotating
ring is flexible and designed for a full 360 degree rotation with four
positive locking knobs to secure the projector into position.
MOUNTING CRADLE: Constructed of .08 (#5052) aluminum, this
universal cradle has three anchoring slots and multiple pivoting positions
for both vertical and horizontal applications up to 55 degrees.
MOUNTING BRACKETS: Constructed of 1/8” cold rolled steel, these
heavy-duty bars are designed to accommodate up to 24” joist spacing.
Commercial brackets are available by special order.
ELECTRICAL: The Junction box is designed with a quick connect/disconnect for easy installation or removal of the projector and houses an
electronic 120/12V step down power supply. Magnetic transformers and
277V options are available upon request. The junction box is listed for
branch circuit wiring and comes equipped with a thermal protector that
provides protection against over lamping and improper installation of
ceiling insulation. Thermal Protector meets NEC and UL requirements.
HEAT SHIELD: Constructed of .05 (#5052) aluminum this protective
disk has two easy to remove perforated knockouts to accommodate
both vertical and horizontal installations.
ORDERING INFORMATION
ORDERING EXAMPLE:
TOP ACCESS HOUSING INCLUDING 75 WATT
OPTICAL PROJECTOR, ADJUSTABLE SHUTTERS,
120V ELECTRONIC TRANSFORMER, 75FL LENSES &
UNFINISHED COVER PLATE
TEMPLATE
ORDER CODE #
DESCRIPTION
2
3
4
Metal Slide
Metal Gobo
Glass Gobo
TRANSFORMER
ORDER CODE #
DESCRIPTION
T A
2
1
1
TA
HOUSING
TEMPLATE
TRANSFORMER
OPTIONS
R
U
R
U
MOUNT
COLOR
TM
1
2
3
4
Electronic 120V
Electronic 277V
Magnetic 120V
Magnetic 277V
OPTIONS
ORDER CODE #
DESCRIPTION
1
2
3
4
None
UV Filter
150fl Lenses
Pin Hole Cover
MOUNT
ORDER CODE #
DESCRIPTION
R
Recessed
COLOR
ORDER CODE #
DESCRIPTION
U
Unfinished
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DETERMINE LOCATION OF PROJECTOR IN CEILING
VERTICAL AIMING AT 45o ANGLE
FORMULA
HORIZONTAL BEAM
(Standard 75fl Lenses)
D
Painting Size
(60”H x 50”W @ 36” from ceiling)
C
Estimate the
distance from
projector to the
area being
illuminated.
C = Distance from ceiling to top of art
D = Distance from wall
C + 1/2 of art height + 6 = D
ART
HT.
D
ART
HT.
FC
Select a slightly
larger size of spot
from chart above
to ensure
coverage.
(Example: 36” + 30” + 6” = 72” or 6’ back from wall)
Your circle of light on the wall will be 63”
Approximately 43 foot candles of light*
C
D
*See grey shaded area in photometrics chart
SPOT SIZE
PHOTOMETRICS
STANDARD 75 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
2’
BEAM
SPREAD
SPOT
SIZE
(IN.)
43o
3’
FC
SPOT
SIZE
(IN.)
20
456
58o
26
67o
77o
4’
FC
SPOT
SIZE
(IN.)
30
186
269
44
31
206
47
117
6’
FC
SPOT
SIZE
(IN.)
42
99
121
53
47
96
70
52
OPTIONAL 150 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
10’
8’
FC
SPOT
SIZE
(IN.)
63
43
70
71
62
55
91
30
2’
FC
SPOT
SIZE
(IN.)
FC
BEAM
SPREAD
75
24
107
14
31o
33
106
18
120
12
102
25
128
14
156
120
14
154
8
190
SPOT
SIZE
(IN.)
3’
4’
FC
SPOT
SIZE
(IN.)
11 1850 18
840
32o
12 1300
19
9
35o
5
36o
6’
FC
SPOT
SIZE
(IN.)
27
200
450
30
13 1100 22
420
14 1000
384
FC
SPOT
SIZE
(IN.)
23
10’
8’
FC
SPOT
SIZE
(IN.)
FC
SPOT
SIZE
(IN.)
FC
38
150
53
75
67
42
150
39
120
55
55
70
34
32
135
43
100
61
50
79
31
33
129
46
91
63
49
81
30
HOUSING AND PROJECTOR DIMENSIONS
HOUSING DIMENSIONS
12"
TOP VIEW
PROJECTOR DIMENSIONS
MAGNETIC
TRANSFORMER
5 3/8”
12"
12"
3 1/2"
9"
1 1/2" - 2 1/2"
3 1/2”
ELECTRONIC
TRANSFORMER
12"
1 1/2"
8 7/8"
TEMPLATE METHODS
METAL SLIDE
METAL GOBO
GLASS GOBO
A Metal Slide is used on custom
cut templates that contour the light
to multiple or irregular objects such
as sculptures. To illuminate multiple
objects on the same wall they must
be installed in a collage format.
A Metal Gobo is used for projecting
black and white images or patterns to
create a theatrical effect such as clouds,
leaves or structural shapes. Manufactured like a stencil, all elements of the
metal gobo design must be connected
with tabs to the outer ring of the gobo.
Over 700 patterns are available.
A Glass Gobo is used for projecting
color images, patterns or logos to create a refined and professional look. Silk
Screened Glass Gobos are made on
quartz glass using a unique coating silk
screened onto the base from digital files.
This “painted” coating allows your design
to avoid “tabbing” needed in custom
steel gobos.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
PROJECTOR SUPPLEMENT
INSTRUCTION SHEET
PROJECTOR SUPPLEMENT FOR PHANTOMTM CONTOUR PROJECTORS
Please read all the instructions in this supplement before proceeding with the installation. This fixture is intended for
installation in accordance with the National Electric Codes regulations. To prevent electric shock, turn off electricity
at the fuse box before proceeding. These instructions are designed as a general overview and guide for a typical
installation. Retain these instructions for future needs and maintenance reference. FOR QUESTIONS REGARDING
YOUR APPLICATION CONTACT CUSTOMER SERVICE (MONDAY THRU FRIDAY 8:00 A.M. - 4:00 P.M. CST) TOLL
FREE 1-800-863-1184.
EXPLODED VIEW
Lamp
Assembly
1
Focal Lens Clip
2
Focal Lens
3
Focal Lens Spacer
4
Focal Lens
5
Focal Cone (Towards Back)
6
Hose Clamp
7
Tapered Frontal Cone
8
Masking Ring
9
Front Condensor Retainer
10
Back Condensor Tube
11
Single Convex Condensing Lens
12
Double Convex Condensing Lens
21
19
20
18
17
16
Condensor
Assembly
15
14
13
10
13
Condensor Spacer
14
Lamp Spring
15
Projector Body
16
Back Condenser Retainer
17
Optional UV Filter
18
75MR16/FO Lamp
19
Lamp Spacer
12
11
9
Focal
Cone
Assembly
7
6
20 Lamp Retainer Ring
8
21
Back Cap
5
4
3
2
1
C
US
ETL LISTED, CONFORMS TO UL STD. 1598, CERTIFIED TO CAN/CSA STD C22.2 NO. 250.0
U.S. PATENT #6,832,845 & OTHER US PATENTS PENDING
73355
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ASSEMBLY INSTRUCTIONS
8
1
2
3 4
Assembly Instructions
13
11
10
12
7
14
1.
21
Place PROJECTOR BODY (15) on level surface with taped holes
facing up.
2. Install FRONT CONDENSER RETAINER (9) into PROJECTOR
BODY (15) and attach using Philips flat head stainless steel screws.
Note: See Template section on bottom of page 3 for correct
18
5
orientation of screws in relation to stainless steel mounting posts and
6
19
15
9
16
masking method selected.
20
3. Install MASKING RING (8) and TAPERED FRONTAL CONE (7)
1
2
3
4
5
6
7
8
Focal Lens Clip
Focal Lens
Focal Lens Spacer
Focal Lens
Focal Cone
Hose Clamp
Tapered Frontal Cone
Masking Ring
9
10
11
12
13
14
20
21
Front Condensor Retainer
Back Condensor Tube
Single Convex Condensing Lens
Double Convex Condensing Lens
Condensor Spacer
Lamp Spring
Lamp Retainer Ring
Back Cap
using Allen head stainless steel screws and finger tighten for shutters
and/or tighten completely for custom template with Allen wrench.
4. Holding the projector in your hand with TAPERED FRONTAL CONE
(7) facing downward, gently insert PLANO CONVEX CONDENSER
LENS (11) with flat side towards the front of the projector against
FRONT CONDENSER RETAINER (9). Do not drop the lens or lenses as
You’re Phantom™ Contour Projector has been shipped pre
assembled for your convenience. Should you need to disassemble the projector for any reason, please follow these
simple step by step instructions?
Disassembly Instructions
1. Holding the projector in your lap or set it on a table with
TAPERED FRONTAL CONE (7) facing down
2. Remove BACK CAP (21)
3. Disconnect SOCKET (not shown) from MR16 lamp (18)
4. While pressing down on lamp gently, Remove LAMP RETAINER
RING (20)
5. Remove LAMP SPACER (19), LAMP (18) and LAMP SPRING (14)
6. Remove BACK CONDENSER RETAINER (16)
7. Remove BACK CONDENSER TUBE (10)
8. Remove BACK CONDENSER SPACER (13)
9. While holding lenses carefully with your fingers turn projector
over and gently remove both CONDENSER LENSES (11) and (12)
10. Remove Allen head stainless steel screws from TAPERED
FRONTAL CONE (7) and MASKING RING (8)
11. Remove (2-4) Philips head stainless steel screws from FRONT
CONDENSER RETAINER (9)
they will break or chip.
5. Gently insert DOUBLE CONVEX CONDENSING LENS (12) against
PLANO CONVEX CONDENSING LENS (11) curve to curve. Do not drop
the lens or lenses as they will break or chip.
6. Insert CONDENSER SPACER (13) with pin-hole side towards LAMP
(18). Align vent holes with FRONT CONDENSOR RETAINER (9) to prevent fogging of lenses.
7. Insert BACK CONDENSER TUBE (10) onto FRONT CONDENSOR
RETAINER (9)
8. Insert BACK CONDENSER RETAINER (16) and turn clockwise
until engaged into PROJECTOR BODY (15)
9. Insert LAMP SPRING (14), OPTIONAL UV LENS (17), MR16/FO LAMP
(18), and LAMP SPACER (19) into position
10. While pressing down on MR16/FO lamp gently, install LAMP
RETAINER RING (20) and turn clockwise until engaged on BACK CONDENSER RETAINER (16)
11. Connect to MR16 LAMP (19) to SOCKET (not shown)
12. Install BACK CAP (21) to PROJECTOR BODY (15)
DETERMINE LOCATION OF PROJECTOR IN CEILING
VERTICAL AIMING AT 45o ANGLE
FORMULA
HORIZONTAL BEAM
(Standard 75fl Lenses)
D
Painting Size
(60”H x 50”W @ 36” from ceiling)
C
Estimate the
distance from
projector to the
area being
illuminated.
C = Distance from ceiling to top of art
D = Distance from wall
C + 1/2 of art height + 6 = D
ART
HT.
D
ART
HT.
FC
Select a slightly
larger size of spot
from chart above
to ensure
coverage.
(Example: 36” + 30” + 6” = 72” or 6’ back from wall)
Your circle of light on the wall will be 63”
Approximately 43 foot candles of light*
C
D
*See grey shaded area in photometrics chart
SPOT SIZE
PHOTOMETRICS
STANDARD 75 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
2’
BEAM
BEAM
SPREAD DEGREE
SPOT
SIZE
(IN.)
3’
FC
SPOT
SIZE
(IN.)
4’
FC
SPOT
SIZE
(IN.)
6’
FC
SPOT
SIZE
(IN.)
OPTIONAL 150 FOCAL LENGTH LENSES
DISTANCE TO OBJECT
10’
8’
FC
SPOT
SIZE
(IN.)
FC
SPOT
SIZE
(IN.)
2’
FC
VNB
43
o
20
456
30
186
42
99
63
43
75
24
107
14
NB
58o
26
269
44
121
53
70
71
33
106
18
120
WB
67o
31
206
47
96
62
55
102
25
128
14
156
VWB
77
o
47
117
70
52
91
30
120
14
154
8
190
BEAM
BEAM
SPREAD DEGREE
SPOT
SIZE
(IN.)
3’
FC
SPOT
SIZE
(IN.)
4’
FC
SPOT
SIZE
(IN.)
6’
FC
SPOT
SIZE
(IN.)
10’
8’
FC
SPOT
SIZE
(IN.)
FC
SPOT
SIZE
(IN.)
FC
VNB
31
o
11 1850 18
840
27
200
38
150
53
75
67
42
12
NB
32o
12 1300 19
450
30
150
39
120
55
55
70
34
9
WB
35o
13 1100 22
420
32
135
43
100
61
50
79
31
o
14 1000 23
384
33
129
46
91
63
49
81
30
5
VWB
36
75
NOTE: If you do not get a good focus
by chart, simply reverse the cone and
adjust focus.
75
75
75
75
75
75
75
CHOOSING BEAM SPREAD
VERY NARROW BEAM SPREAD (VNB)
Lens, wide spacer, narrow spacer, lens, focal lens clip
NARROW BEAM SPREAD (NB)
Lens, wide spacer, lens, focal lens clip
WIDE BEAM SPREAD (WB)
Lens, narrow spacer, lens, focal lens clip
VERY WIDE BEAM SPREAD (VWB)
Lens, lens, focal lens clip
Each kit contains one 39mm focal cone, two 75fl, 39mm focal lenses, two pvc lens spacers
and one lens retainer clip. Optional 150fl, 39mm lenses are available for long throws that
require a very tight field of light and sharp focus. Note: Consult factory should you need
assistance selecting a beam pattern or to solve issues related to poor focus.
OPTIMIZE BEAM SPREAD
When selecting a lens combination or beam spread, the objective of the installation is to cover the art with the
smallest circle of light. Of course, the top corners of the art are your main concern and will dictate the field size
as shown in the illustration. It is always best to test before mounting the housing if the art is available. If the
art is gone or undetermined, use paper or cardboard taped to the wall to verify your selection. The optimum
aiming angle is 45 degrees to the center of the art, and may be adjusted for jobsite conditions, frame shadow,
or glare. See page 4 for details.
SHUTTER SPECIFICATIONS
The Contour Projector Package comes with 3 different shutter assemblies. Each shutter assembly is specially designed to compliment a
particular beam configuration by adjusting the light to follow the curvature of the lens. This allows for clean, straight lines, regardless of the
aiming angle. Combination of different shutters can be used to handle unique situations. Note: Longhorn shutter should be used only when
projector body interferes with mounting cradle on long throws, prohibiting installation or proper adjustment.
NARROW BEAM
WIDE BEAM
VERY WIDE BEAM
This set of (4) shutters is used for narrow
beam applications and can be identified
by rounded finger tabs.
This set of (4) shutters is used for wide
beam applications and can be identified
by square finger tabs.
This set of (4) shutters is used for very
wide beam applications and can be
identified by indented and rounded finger tabs.
TEMPLATES
CUSTOM TEMPLATES
FRONT VIEW
A Custom Template is used when multiple paintings are
involved or a sculpture is being illuminated. If multiple paintings
are being illuminated, the paintings must be on the same wall
such as in a collage format. (See template instructions for
cutting tips and recommendations)
L
R
B
ALLEN HEAD SCREWS
CENTER STAINLESS STEEL
MOUNTING POST ON BOTTOM
FRONT VIEW
SHUTTERS
L
Metal shutters are used for simple square and rectangular
shaped art.
Shutters should be installed between the
Tapered Frontal Cone and the Template Ring and secured
with Allen head screws to lock into position. (See shutter
instructions for masking tips and recommendations)
R
B
ALLEN HEAD SCREWS
CENTER STAINLESS STEEL
MOUNTING POST ON BOTTOM
PROJECTOR SUPPLEMENT
INSTRUCTION SHEET
CHECKING FOR GLARE
CHECKING FOR FRAME SHADOW
To check varnish glare, use your projector or a bright flashlight
and a second person to determine where the best location
is. Sometimes the projector will be off center of art for best
results from viewing angle. Depending on the position of art
you may not succeed in eliminating objectional glare.
After checking for varnish glare, check to see how deep
the frame is. The deeper the frame, the further the
distance is between art and light to minimize the shadow.
Optimum viewing angle is 45 degrees. Sometimes you may not
succeed in eliminating all of the shadow.
OVERSIZED BEAM SPREAD
An oversized painting can be accommodated by using 2 Contour
Projectors, mounted at oblique angles. Note: For best results remove
one shutter blade from each projector to allow light from both projectors
to overlap and softly fade. Otherwise, a sharp image may appear on light
colored objects that are undesirable.
TRANSFORMER
ELECTRONIC TRANSFORMER WIRING INSTRUCTIONS
MAGNETIC TRANSFORMER WIRING INSTRUCTIONS
Hatch® electronic transformers are
standard on all Phantom Contour
Projectors. This transformer has
a built in safety device and is
designed to power down or shut
off in the event of a short in the
system. The BLACK and WHITE
wires represent the supply
voltage or input voltage to the
transformer. The two RED wires represent the output voltage or
12 volt AC output going to the fixture. Other input voltages such
as 220, 240 and 277 are available as an option as well as 50 Hz
models available for our European customers.
The Q-Tran® magnetic transformers with built in thermal
protector are optional on all
Phantom Contour Projectors.
This transformer has a built
choke coil to reduce noise
levels to about 17db which is
well below audible levels of
26db. Dual input voltages of
115V and 120V for extending
lamp life. The RED and WHITE wires provide 115 volts to the
transformer. The BLACK and WHITE wires provide 120 volts
to the transformer. The two BLUE wires represent the output
voltage or 12 volt AC output going to the fixture. Other input
voltages are available for 220, 240, 277 and 50 Hz models for
European customers in large quantities by special order only.
MR16 LAMP
The Contour Projector is designed to use a special Ushio JCR12V-75W/FO MR16 fiber optic lamp for optimal
performance and light uniformity. Use of any other lamp, without the same characteristics as the Ushio,
will result in unsatisfactory results. Consult the factory at 800-863-1184 for questions or to order replacement lamps.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TEMPLATE INSTRUCTIONS
CUSTOM BRASS
CONTOUR PROJECTOR
TEMPLATE
INSTRUCTIONS
Cutting brass confinement templates has always been a mystery to most people trying
to install projectors and therefore left to professional installers, adding frustration and
cost to the project. The Phantom Contour Projector is designed with the installer in
mind and cutting confinement templates has never been easier. Sure, practice makes
perfect but that can only be made simpler by knowing the tricks of the trade.
The confinement template or brass slide is designed to allow you, the installer, to illuminate single objects, multiple objects and irregular shaped objects by cutting an
opening in the slide. Theoretically, as long at the object is within the projected field
of light, the object can be illuminated. However, there are limitations due to focusing
in extreme situations. Until you get your feet wet, keep things simple. Above all, remain
calm as this will be a frustrating experience the first time. After one or two, you’ll be
cutting templates like a pro. So take your time, take a deep breath, have some fun and
enjoy the results!
FIGURE 1
FIGURE 2a
Please refer to PROJECTOR SUPPLEMENT for selecting lenses and beam angles.
The following instructions address some basics steps of the template
cutting process:
1.
Orientation of brass slide in the projector
2. Orientation of brass slide when cutting
3. Finding target on the wall
4. Tracing the slide
5. Establishing straight lines
6. Cut one side at a time
7. Flexing the slide
8. Filing instead of cutting
9. Wedging the slide
ORIENTATION OF SLIDE IN THE PROJECTOR — FIGURE 1
It is absolutely critical to the adjustment process that you install the brass slide correctly into the projector each time. Remember, that all projected light is upside
down and backwards. Don’t worry; I just want you to be aware of what is going on.
FIGURE 2b
FIGURE 3a
Start by positioning the brass slide in the gate (between the black tapered frontal cone
and the silver template ring) with the notch on the top left, facing the art on the wall.
This will be your position every time you remove and reinstall the brass slide. Otherwise, you will cut the wrong side, spill the light onto the wall and have to start over. So
pay attention to this detail.
ORIENTATION OF BRASS SLIDE WHEN CUTTING — FIGURE 2
Remove the brass slide from the projector and rotate the brass slide clockwise without flipping the slide. The notch should now be on the bottom right hand corner.
This will be your position every time you cut the brass slide. Otherwise, you will cut the
wrong side, spill the light onto the wall and have to start over. So pay attention to this
other important detail.
FIGURE 3b
Hint: I like to scribe on the brass slide with my scissors the letters T, L, R, and B for top,
left, right and bottom around the opening. This is a good safety net and reference point
when cutting. FIGURE 2b.
FINDING TARGET ON THE WALL — FIGURE 3
Cutting a brass slide confinement template involves the trial and error method. That means you simply cut or punch a small hole in the brass slide to find
the target and or targets on the wall. Once you have positioned the light on the
art, make a few cuts to see what happens. The goal is to establish straight lines.
FIGURE 3c
Hint: This is also a good time to double check and set the focus. Double check and
tighten all mounting screws. Check that the cover plate fits flush with the ceiling and
does not hit the projector body or front cone. If so, you may have to reposition the
projector before cutting the brass slide.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TEMPLATE INSTRUCTIONS
CUSTOM BRASS
CONTOUR PROJECTOR
TEMPLATE
INSTRUCTIONS
TRACING THE SLIDE — FIGURE 4
Position your brass test slide over a new slide in the cutting position. Carefully scribe
the opening shape using your scissors onto the new brass slide.
FIGURE 4
Hint: It is best to use a good flat surface such as a metal plate or piece of ceramic tile
to make things easier when tracing and rubbing the brass slide.
ESTABLISHING STRAIGHT LINES
Reinstall the test slide into the projector and make the necessary adjustments to your
new slide to fine tune the projected image and establish straight lines. This is a good
time to make some big cuts with goal of covering the majority of the art with light. Take
a third slide, trace your second slide and repeat as many times as necessary until you
get it right.
FIGURE 5a
CUT ONE SIDE AT A TIME
Finish one side before going to the next. This will ensure that you have the
brass slide in the same position each time it is removed and replaced. The slide may
be cocked to the left or right as you will see. Find the best position and stick with it
throughout the cutting process.
Hint: It is absolutely critical that you position the slide the same way each time you take
it in and out and establish a reference point on the art. If it just doesn’t look right, reset
the brass slide until you get it back into the reference position.
FIGURE 5b
FLEXING THE SLIDE — FIGURE 5
It is a good idea to gently rub the edge of the brass slide with your scissor handles to
prevent the brass slide from becoming bent or tearing when going in and out of the
projector during the cutting process.
It is also possible and often necessary to manipulate the projected image by
rubbing the brass slide more firmly. This is called flexing the slide. Rubbing on the
side towards the art, forces the slide to bend inward, closer to the condensing lenses,
which causes the projected image size to reduce. Consequently, rubbing on the back
side of the brass slide, causes the slide to flex towards the focusing lenses, resulting
in a slightly larger image. This is good technique to use when you have a small spill to
deal with on the wall.
FIGURE 6a
Hint: Flexing the slide does change the projected image. Be careful after flexing that
you do not over cut a side of the brass slide that was previously finished. This may
result in having to start over.
FIGURE 6b
FILING INSTEAD OF CUTTING — FIGURE 6
If you plan to do this often, you may want to pick up a set of small jewelers files
from your local Radio Shack. These files come in assorted shapes and are very
helpful when making small adjustments or working on irregular shaped objects,
such as sculptures. Some custom brass templates can only be done with
jeweler’s files as it would be impossible to cut the shape with your scissors.
WEDGING THE SLIDE — FIGURE 7
Once you have completed cutting the brass template, it is time to wedge it into position. This will hold the slide in the desired position and prevent the slide from rocking
or moving around in the projector. Insert small wedge into template slot and press into
place with a small screwdriver or tip of scissors. If this affects your projected image, it
may be necessary to reposition the template and insert the wedge in a different location.
TM
Figure 7
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
FF GUIDE
FINISHING INSTRUCTIONS
ENGLISH INSTRUCTIONS
Aluminum
Mounting Flange
READ AND UNDERSTAND THESE INSTRUCTIONS
BEFORE INSTALLING FIXTURE.
This fixture is intended for installation in accordance
with National Electrical Code and local regulations. To
assure full compliance with local codes and regulations,
check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at
fuse box before proceeding. Retain these instructions
for maintenance reference.
Stud or
Wood Block
Floated Area
FLOATING
Apply first pass of drywall mud using only the
edge of aluminum ceiling plate out from the panel
approximately 8”-12”.
Floated Area
Note: Do not apply drywall mud or tape on surface
of ceiling plate.
8”-12”
We would suggest an 8”-12”
floated area for smooth
ceiling finish.
8”-12”
Apply a second pass of drywall mud and gradually
taper edge using a large drywall mud knife. Sand
smooth, apply texture, paint or wallpaper.
PAINTING AND FINISHING
Apply primer coat on all exposed metal areas of
Smooth
Tapered Edge
Primed
Metal Surface
ceiling plate before painting.
Recessed Groove
Remove glare sheild and center panel from finished
ceiling plate and paint separately.
Center Panel
Glare Sheild
(Optional)
Check edge of panel and ceiling plate and carefully
remove any excess paint buildup using a sharp
knife. Re-install center panel and optional glare
shield when paint is dry.
Finished
Ceiling
Appearance
Visible
Hairline Crack
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
GUIA FF
INSTRUCCIONES DE
INSTRUCCIONES ESPAÑOL
TERMINAR
El aluminio que
monta reborde
LEA Y ENTIENDA ESTOS INSTRUCCIONES ANTES
DE INSTAKAR INSTALACIÓN FIJA.
Esta instalación fija se inteded para la instalación de
acuerdo con Código Eléctrico Nacional y para las
regulaciones locales. Para asegurar la conformidad
repleta con códigos y regulaciones locales, cheque
con su inspector eléctrico antes de la instalación. Para
prevenir el golpe eléctrico, la vuelta de la electricidad
en caja de fusibles antes de avanzar. Retenga estas
instrucciones para la referencia de la conservación.
Tachone o el
bloque de Madera
Area flotada
FLOTANDO
Aplique primer capa de cemento de untas y cinta
usaando solamente la orilla bicelada del plato de
aluminio del techo.
Nota: No appliqué cemento de juntas ni cinta sobre
8”-12”
Area flotada
8”-12”
Sugerimos un 8”-12” flotó área para
el fin liso de techo
la superficie mas alta del plato de techo.
Aplique la segunda capa de cemento de juntas
y gradualmente disminuya la orilla usando una
spatula ancha. Arena, suaviza, aplica la textura, la
pintura o el papel pintado.
PINTURA Y TERMINAR
Aplique el abrigo más estirado en todas áreas
la orilla estrechada liso
superficie más estirada de metal
expuestas de metal de plato de techo antes de
pintar.
Quite
Ranura de
Recessed
deslumbre
el
protector
y
el
entrepaño
entrepaño
central
central del plato de techo ya instalado y pinte
Deslumbre el
protector
separadamente.
Verifique la orilla del plato de techo y quite con
cuidado cualquier aumento de pintura de exceso que utiliza un cuchillo agudo. Vuelva a instalar
apariencia
terminada de
techo
grieta fina
entrepaño central y opcional deslumbra el protector
cuando pintura esta seca.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ORDERING INFORMATION
DATE
P.O.#
JOB NAME
SHIP TO:
BILL TO:
COMPANY NAME
COMPANY NAME
ATTENTION
ATTENTION
ADDRESS
ADDRESS
CITY/STATE/ZIP
CITY/STATE/ZIP
PHONE
PHONE
AGENT
SPECIFIED BY
SHIPPING METHOD
GROUND
2ND DAY
OVERNIGHT
OTHER
SPECIAL INSTRUCTIONS
CONTOUR PROJECTOR ORDER FORM
QUANTITY
HOUSING
TEMPLATE
TRANSFORMER
OPTIONS
MOUNT
COLOR
TRANSFORMER
ORDER CODE
OPTIONS
ORDER CODE
MOUNT
ORDER CODE
COLOR
ORDER CODE
R - RECESSED
S - STANDARD CANOPY*
L - LOW PROFILE
CANOPY*
W - WHITE
U - UNFINISHED
W - MATTE WHITE*
B - MATTE BLACK*
* SURFACE MOUNT ONLY
* SURFACE MOUNT ONLY
CONTOUR PROJECTOR ORDER CODES
QTY.
HOUSING
ORDER CODE
RM - REMODELER
FF - FLOAT FINISH
TA - TOP ACCESS
NC - NEW CONSTRUCTION
SM - SURFACE MOUNT
TEMPLATE
ORDER CODE
1 - SHUTTERS
2 - METAL SLIDE
3 - METAL GOBO
4 - GLASS GOBO
1 - ELECTRONIC 120V
2 - ELECTRONIC 277V
3 - MAGNETIC 120V
4 - MAGNETIC 277V
1 - NONE
2 - UV FILTER
3 - 150FL LENSES
4 - PINHOLE COVER
E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TABLE OF
CONTENTS
AC SERIES
ADJUSTABLE
CONCEALED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
Phantom AC Series (adjustable concealed) light strips provide the
ultimate performance and flexibility as a seamless, concealed low
voltage linear lighting source. All Phantom AC Series lighting strips are
manufactured to your exact specifications using a variety of custom
metal glare shields so that the light is always perfectly controlled while
keeping the fixture out of sight. Lamping options include 3 watt, 5 watt,
and 10 watt Incandescent festoon lamps (rated for 7,500 hours) or
Xenon festoon lamps (rated for up to 20,000 hours). Energy efficient
0.6 watt 12VAC LED lamps are ideal for applications where energy
code compliance is an issue or a major consideration. All lamping
options are fully dimmable for achieving the perfect light level or to
extend lamp life. Phantom AC Series light strips are available in eight
popular painted colors as well as premium metals such as polished
brass, satin brass, polished stainless steel, satin stainless steel and
natural copper. Phantom Lighting is all about seeing the light, not the
fixture!
FESTOON LIGHTING STRIPS
THE AC SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display applications
—
Current carrying concealed custom shelf supports, with no unsightly
exposed wiring or connectors
—
An ideal solution for new shelving projects where support pins and
drilled holes are preferred over standard exposed metal shelf supports
—
Paint grip galvanized metal trim with unique glare shields specifically
designed for horizontal shelf or display lighting applications
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
1
2
3
4
4
6
CUSTOM
0.6
3
5
10
3
4
0.6
AC
LAMP TYPE
LEAD
LENGTH
LEAD TYPE
12
24
272 2700K 12V
274 2700K 24V
352 3500K 12V
354 3500K 24V
502 5000K 12V
504 5000K 24V
XFR XENON FROSTED
XCL XENON CLEAR
12
272
AD
STRIP
LENGTH
FINISH
6”
(FOR AC
SERIES AND
AE SERIES
ONLY)
(INCHES)
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
AC SERIES
25-26
AE SERIES
27-28
CM SERIES
29-30
HM SERIES
31-32
TL SERIES
33-34
VM SERIES
35-36
PB POLISHED BRASS
SB SATIN BRASS
PS POLISHED STAINLESS
SS SATIN STAINLESS
NC NATURAL COPPER
2
AC
AD
6”
MB
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
FESTOON LIGHTING STRIPS
AE SERIES
ADJUSTABLE
EXPOSED
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom AE Series (adjustable exposed) light strips provide the
ultimate performance and flexibility as a seamless, concealed
low voltage linear lighting source. All Phantom AE Series lighting
strips are manufactured to your exact specifications using a
variety of custom metal glare shields so that the light is always
perfectly controlled while keeping the fixture out of sight. Lamping
options include 3 watt, 5 watt, and 10 watt Incandescent festoon
lamps (rated for 7,500 hours) or Xenon festoon lamps (rated for
up to 20,000 hours). Energy efficient 0.6 watt 12VAC LED lamps
are ideal for applications where energy code compliance is an
issue or a major consideration. All lamping options are fully
dimmable for achieving the perfect light level or to extend lamp
life. Phantom AE Series light strips are available in eight popular
painted colors as well as premium metals such as polished
brass, satin brass, polished stainless steel, satin stainless steel
and natural copper. Phantom Lighting is all about seeing the
light, not the fixture!
FESTOON LIGHTING STRIPS
THE AE SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display applications
—
Patented current carrying concealed custom shelf supports, with
no unsightly exposed wiring or connectors
—
Paint grip galvanized metal trim with unique glare shields specifically
designed for horizontal shelf or display lighting applications
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
1
2
3
4
5
4
6
CUSTOM
0.6
3
5
10
3
4
0.6
AE
LAMP TYPE
12
24
LEAD
LENGTH
LEAD TYPE
STRIP
LENGTH
FINISH
6”
AD (FOR AC
272 2700K 12V
SERIES AND
274 2700K 24V
AE SERIES
352 3500K 12V
ONLY)
354 3500K 24V
502 5000K 12V
504 5000K 24V
XFR XENON FROSTED
XCL XENON CLEAR
(INCHES)
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
PB POLISHED BRASS
SB SATIN BRASS
PS POLISHED STAINLESS
SS SATIN STAINLESS
NC NATURAL COPPER
2
AE
12
272
AD
12”
MB
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
CM SERIES
COVE
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom CM Series (cove lighting) strips provide the ultimate
performance and flexibility as a seamless, indirect low voltage linear
lighting source. All Phantom CM Series lighting strips are manufactured
to your exact specifications using a variety of custom metal glare
shields so that the light is always perfectly controlled while keeping the
fixture out of sight. Lamping options include 3 watt, 5 watt, and 10 watt
Incandescent festoon lamps (rated for 7,500 hours) or Xenon festoon
lamps (rated for up to 20,000 hours). Energy efficient 0.6 watt 12VAC
LED lamps are ideal for applications where energy code compliance
is an issue or a major consideration. All lamping options are fully
dimmable for achieving the perfect light level or to extend lamp life.
Phantom CM Series light strips are available in eight popular painted
colors and three custom trim profiles. Phantom Lighting is all about
seeing the light, not the fixture!
FESTOON LIGHTING STRIPS
THE CM SERIES FEATURES
—
High performance, low profile, concealed linear lighting source for
new construction or retrofit architectural lighting applications
—
Paint grip galvanized metal trims specifically designed for cove or
indirect lighting applications
—
May be field cut or notched for radius cove lighting applications
—
Continous feed through capacity, up to 13.33 amps per fixture
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
CM
1
2
3
4
5
4
6
CUSTOM
0.6
3
5
10
1
4
0.6
LAMP TYPE
LEAD
LENGTH
LEAD TYPE
STRIP
LENGTH
FINISH
12
24
272 2700K 12V
274 2700K 24V
352 3500K 12V
354 3500K 24V
502 5000K 12V
504 5000K 24V
XFR XENON FROSTED
XCL XENON CLEAR
DL DOUBLE LEADS
6”
12”
18”
24”
36”
CUSTOM
12
272
DL
6”
(INCHES)
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
PB POLISHED BRASS
SB SATIN BRASS
PS POLISHED STAINLESS
SS SATIN STAINLESS
NC NATURAL COPPER
2
CM
MB
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
HM SERIES
HORIZONTAL
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom HM Series (horizontal mount) light strips provide the ultimate
performance and flexibility as a seamless, concealed low voltage
linear lighting source. All Phantom HM Series lighting strips are
manufactured to your exact specifications using a variety of custom
metal glare shields so that the light is always perfectly controlled while
keeping the fixture out of sight. Lamping options include 3 watt, 5 watt,
and 10 watt Incandescent festoon lamps (rated for 7,500 hours) or
Xenon festoon lamps (rated for up to 20,000 hours). Energy efficient
0.6 watt 12VAC LED lamps are ideal for applications where energy
code compliance is an issue or a major consideration. All lamping
options are fully dimmable for achieving the perfect light level or to
extend lamp life. Phantom HM Series light strips are available in eight
popular painted colors as well as premium metals such as polished
brass, satin brass, polished stainless steel, satin stainless steel and
natural copper. Phantom Lighting is all about seeing the light, not the
fixture!
FESTOON LIGHTING STRIPS
THE HM SERIES FEATURES
—
Designed for hard wiring applications such as antiques, free
standing furniture, or built in bookshelves with fixed shelving
—
Paint grip galvanized metal trim with unique glare shields specifically
designed for horizontal shelf or display lighting applications
—
Customizable wiring methods designed for every application
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
1
2
3
4
5
4
6
CUSTOM
0.6
3
5
10
3
4
0.6
HM
LAMP TYPE
LEAD
LENGTH
LEAD TYPE
12
24
272 2700K 12V
274 2700K 24V
352 3500K 12V
354 3500K 24V
502 5000K 12V
504 5000K 24V
XFR XENON FROSTED
XCL XENON CLEAR
12
272
STRIP
LENGTH
FINISH
6”
DL DOUBLE LEADS
12”
LR LEADS RIGHT
18”
LL LEADS LEFT
24”
36”
(WHEN FACING
THE APPLICATION) CUSTOM
(INCHES)
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
PB POLISHED BRASS
SB SATIN BRASS
PS POLISHED STAINLESS
SS SATIN STAINLESS
NC NATURAL COPPER
2
HM
LR
6”
MB
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TL SERIES
TASK
LIGHTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom TL Series (task lighting) strips provide the ultimate performance
and flexibility as a seamless, concealed low voltage linear lighting
source. All Phantom TL Series lighting strips are manufactured to your
exact specifications using a variety of custom metal glare shields so
that the light is always perfectly controlled while keeping the fixture out
of sight. Lamping options include 3 watt, 5 watt, and 10 watt Incandescent
festoon lamps (rated for 7,500 hours) or Xenon festoon lamps (rated
for up to 20,000 hours). Energy efficient 0.6 watt 12VAC LED lamps
are ideal for applications where energy code compliance is an issue
or a major consideration. All lamping options are fully dimmable for
achieving the perfect light level or to extend lamp life. Phantom TL
Series light strips are available in eight popular painted colors as well
as premium metals such as polished brass, satin brass, polished
stainless steel, satin stainless steel and natural copper. Phantom
Lighting is all about seeing the light, not the fixture!
FESTOON LIGHTING STRIPS
THE TL SERIES FEATURES
—
Designed for task lighting applications in areas such as desks,
under cabinets, butler’s pantry, workstations and offices
—
Paint grip galvanized metal trims with unique glare shields specifically
designed for horizontal task lighting applications
—
Customizable wiring methods designed for every application
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
TL
1
2
3
4
5
4
6
CUSTOM
0.6
3
5
10
1
4
0.6
LAMP TYPE
LEAD
LENGTH
LEAD TYPE
12
24
272 2700K 12V
274 2700K 24V
352 3500K 12V
354 3500K 24V
502 5000K 12V
504 5000K 24V
XFR XENON FROSTED
XCL XENON CLEAR
12
272
STRIP
LENGTH
FINISH
6”
12”
18”
24”
36”
(WHEN FACING
CUSTOM
THE APPLICATION)
DL DOUBLE LEADS
(INCHES)
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
LR LEADS RIGHT
LL LEADS LEFT
PB POLISHED BRASS
SB SATIN BRASS
PS POLISHED STAINLESS
SS SATIN STAINLESS
NC NATURAL COPPER
2
TL
LR
6”
MB
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2012 Phantom Lighting Systems
VM SERIES
VERTICAL
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom VM Series (vertical mount) light strips provide the ultimate
performance and flexibility as a seamless, concealed low voltage
linear lighting source. All Phantom VM Series lighting strips are
manufactured to your exact specifications using a variety of custom
metal glare shields so that the light is always perfectly controlled while
keeping the fixture out of sight. Lamping options include 3 watt, 5
watt, and 10 watt Incandescent festoon lamps (rated for 7,500 hours)
or Xenon festoon lamps (rated for up to 20,000 hours). Energy
efficient 0.6 watt 12VAC LED lamps are ideal for applications where
energy code compliance is an issue or a major consideration. All
lamping options are fully dimmable for achieving the perfect light level
or to extend lamp life. Phantom VM Series light strips are available
in eight popular painted colors as well as premium metals such as
polished brass, satin brass, polished stainless steel, satin stainless
steel and natural copper. Phantom Lighting is all about seeing the light,
not the fixture!
FESTOON LIGHTING STRIPS
THE VM SERIES FEATURES
—
Designed for applications such as antiques, free standing furniture,
or built in bookshelves with fixed shelving or glass shelves
—
Paint grip galvanized metal trim with unique glare shields specifically
designed for vertical shelf or display lighting applications
—
Customizable wiring methods designed for every application
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
1
2
3
4
5
4
6
CUSTOM
0.6
3
5
10
4
4
0.6
VM
LAMP TYPE
LEAD
LENGTH
LEAD TYPE
12
24
272 2700K 12V
274 2700K 24V
352 3500K 12V
354 3500K 24V
502 5000K 12V
504 5000K 24V
XFR XENON FROSTED
XCL XENON CLEAR
(WHEN FACING
THE APPLICATION)
12
272
BR
STRIP
LENGTH
FINISH
6”
12”
18”
24”
36”
CUSTOM
DL DOUBLE LEADS
TL TOP LEFT
TR TOP RIGHT
BL BOTTOM LEFT
BR BOTTOM RIGHT
(INCHES)
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
PB POLISHED BRASS
SB SATIN BRASS
PS POLISHED STAINLESS
SS SATIN STAINLESS
NC NATURAL COPPER
2
VM
6”
MB
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TRANSFORMERS
M A G N E T I C P O W E R S U P P LY
LOW VOLTAGE STRIP
100
VA
SPECIFICATIONS
MAXIMUM
WATTAGE
WIDTH (W)
250
VA
120
500
VA
200
6 3/4”
4 7/8”
4 5/8”
(1) 15A
(1) 25A
(1) 7A
(1) 10A
10
11
12V PART #’s
MT102
MT152
MT252
24V PART #’s
MT104
MT154
MT254
1000
10 1/4”
5 5/8”
5 5/8”
5 1/4”
5 1/4”
5 1/4”
(3) 25A
(4) 25A
(2) 15A
19
(2) 25A
(2) 25A
19
MT502
1200
VA
800
8 1/4”
5 5/8”
5 1/4”
(2) 25A
(1) 25A
13
1000
VA
600
5 5/8”
4 5/8”
WEIGHT (LBS)
8 1/4”
8 1/4”
4 7/8”
4 5/8”
(1) 10A
(1) 5A
750
VA
400
6 3/4”
4 7/8”
DEPTH (D)
12 VOLT (CB)
24 VOLT (CB)
US
150
VA
80
6 3/4”
HEIGHT (H)
FESTOON LIGHTING STRIPS
28
28
MT752 MT1002
TRANSFORMERS37-38
MT754 MT1004 MT1204
MT504
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total
amperage. (watts / voltage = amperage). Refer to the table
to calculate wire size and fusing requirements.
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
VOLTAGE / WATTAGE
SPACING
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
5.10
10.20
15.30
20.40
25.50
30.60
35.70
40.80
45.90
51.00
3.83
4.25
WATTS/VOLTS
WATTAGE
1.7W / 12V
4”
LED
AMPERAGE
XENON / INCANDESCENT
90
6.75
6.00
63
7.50
81
72
90
3.38
3.00
105
120
135
8.75
10.00
11.25
3.75
150
12.5
90
105
120
135
150
3.75
4.38
5.00
5.63
6.25
150
X
X
X
X
10.00
12.50
AMPERAGE
2.50
WATTAGE
5.00
30
7.50
60
1.25
WATTAGE
3.40
6
90
X
150
X
180
X
X
X
210
X
270
240
300
3.75
5.00
6.25
7.50
8.75
10.00
11.25
12.50
6.80
10.20
13.60
17.00
20.40
23.80
27.20
30.60
34.00
.85
1.00
1.42
1.13
1.70
1.98
18
24
30
36
42
1.50
2.00
2.50
3.00
3.50
12
0.50
120
2.50
.57
WATTAGE
2.55
2.27
2.83
54
48
60
4.50
4.00
5.00
WATTAGE
6
12
18
24
30
36
42
48
54
60
AMPERAGE
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
WATTAGE
10
20
30
40
50
60
70
80
90
100
5W / 12V
XENON / INCANDESCENT
81
72
5.25
2.63
90
7.50
75
3.13
AMPERAGE
AMPERAGE
0.83
WATTAGE
5W / 24V
XENON / INCANDESCENT
54
2.25
75
6.25
3.40
63
4.50
45
1.88
60
60
120
AMPERAGE
2.50
20
0.42
WATTAGE
0.83
20
AMPERAGE
20
0.83
3.33
4.17
3.33
30
60
2.50
5.83
60
2.08
1.67
7.50
6.67
70
2.50
120
140
160
10.00
11.67
13.33
100
3.75
3.33
100
8.33
8.33
90
80
2.92
80
6.67
60
5.00
40
1.67
5.00
50
40
1.25
40
1.67
WATTAGE
AMPERAGE
10W / 24V
1.67
10
AMPERAGE
10W / 12V
XENON / INCANDESCENT
2.98
54
3.75
1.50
5.00
2.50
90
3W / 12V
XENON / INCANDESCENT
2.55
45
36
36
45
45
1.88
60
3W / 24V
6”
2.13
1.70
3.00
27
1.13
3.75
30
1.25
30
AMPERAGE
LED
27
2.25
18
30
2.50
15
0.63
1.7W / 12V
XENON / INCANDESCENT
1.28
18
1.50
0.75
15
1.25
WATTAGE
WATTAGE
10W / 24V
XENON / INCANDESCENT
XENON / INCANDESCENT
6”
6”
9
0.38
WATTAGE
AMPERAGE
AMPERAGE
10W / 12V
4”
0.75
WATTAGE
AMPERAGE
5W / 12V
5W / 24V
XENON / INCANDESCENT
.85
9
AMPERAGE
3W / 24V
XENON / INCANDESCENT
XENON / INCANDESCENT
4”
6”
.43
WATTAGE
3W / 12V
XENON / INCANDESCENT
4”
4.17
X
X
X
X
80
100
120
140
160
180
200
3.33
4.17
5.00
5.83
6.67
7.50
8.33
WARNING: THERE IS A LIMIT ON HOW MANY PHANTOM FIXTURES CAN BE CONNECTED IN TANDEM. NO CIRCUIT SHALL
EXCEED 160 WATTS ON 12V AND 320 WATTS ON 24V. MAXIMUM FEED THRU CAPACITY SHALL NOT EXCEED 13.33 AMPS.
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
SEE THE LIGHT
TRIM SWATCHES
NOT THE FIXTURE
LIGHTING
STRIPS
LOW VOLTAGE STRIP
TRIM PROFILES
TRIM 1
TRIM 2
3/4”
FESTOON LIGHTING STRIPS
TRIM 3
3/4”
3/4”
TRIM 4
3/4”
1”
TRIM 3
3/4”
o
92 Beam Spread
1/2”
3
AC
AE
CM
HM
TL
VM
VM
1
2
3
4
5
4
6
CUSTOM
0.6
3
5
10
4
4
0.6
o
83 Beam Spread
5/8”
o
166 Beam Spread
TRIM 5
5/8”
3/4”
5/8”
1”
1/4”
1/4”
3/8”
o
92 Beam Spread
1/2”
o
o
83 Beam Spread
166 Beam Spread
TRIM FINISHES
3
3/4”
1/4”
3/8”
o
3/4”
3/4”
o
120 Beam Spread
120 Beam Spread
TRIM 4
3/4”
1”
o
150 Beam Spread
5/8”
1”
1/4”
TRIM 2
3/4”
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
TRIM 5
3/4”
3/4”
o
150 Beam Spread
TRIM 1
3/4”
ORDERING INFORMATION
QTY.
LAMP TYPE
LEAD
LENGTH
LEAD TYPE
12
24
272 2700K 12V
274 2700K 24V
352 3500K 12V
354 3500K 24V
502 5000K 12V
504 5000K 24V
XFR XENON FROSTED
XCL XENON CLEAR
12
272
6”
AD (FOR AC
SERIES AND
AE SERIES
ONLY)
DL DOUBLE LEADS
LR LEADS RIGHT
LL LEADS LEFT
TL TOP LEFT
TR TOP RIGHT
BL BOTTOM LEFT
BR BOTTOM RIGHT
STRIP
LENGTH
FINISH
(INCHES)
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
SWATCHES39
PB POLISHED BRASS
SB SATIN BRASS
PS POLISHED STAINLESS
SS SATIN STAINLESS
NC NATURAL COPPER
(WHEN FACING
THE APPLICATION)
DL
12”
MB
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ORDERING INFORMATION
DATE
P.O.#
FESTOON LIGHTING STRIPS
JOB NAME
SHIP TO:
BILL TO:
COMPANY NAME
COMPANY NAME
ATTENTION
ATTENTION
ADDRESS
ADDRESS
CITY/STATE/ZIP
CITY/STATE/ZIP
PHONE
PHONE
AGENT
SPECIFIED BY
SHIPPING METHOD
£
GROUND
£
2ND DAY
£
OVERNIGHT
£
OTHER
SPECIAL INSTRUCTIONS
LIGHTING STRIPS ORDER FORM
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
TRANSFORMERS*
LAMP TYPE
LEAD TYPE
LEAD
LENGTH
BUSS BARS*
PART
NUMBER
VOLTAGE
OPERATING
VOLTAGE
QTY.
FINISH
STRIP
LENGTH
CONNECTOR KITS*
(FOR AC SERIES ONLY)
QTY.
OVERALL
LENGTH
(FOR AC &AE SERIES ONLY)
HOLE
SPACING
QTY.
ORDER FORM
40-41
PART
NUMBER
*INCLUDE ADDITIONAL
NOTES ON BACK
E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.
ORDERING EXAMPLE ON PAGE 2 OF THIS FORM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
OUR OTHER PRODUCTS
SEE THE LIGHT
NOT THE FIXTURE
TM
SEE THE LIGHT
NOT THE FIXTURE
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AC SERIES
ADJUSTABLE
CONCEALED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
Phantom AC Series (adjustable concealed) light strips provide the
ultimate performance and flexibility as a seamless, concealed low
voltage linear lighting source. All Phantom AC Series lighting strips are
manufactured to your exact specifications using a variety of custom
metal glare shields so that the light is always perfectly controlled while
keeping the fixture out of sight. Lamping options include 3 watt, 5 watt,
and 10 watt Incandescent festoon lamps (rated for 7,500 hours) or
Xenon festoon lamps (rated for up to 20,000 hours). Energy efficient
0.6 watt 12VAC LED lamps are ideal for applications where energy
code compliance is an issue or a major consideration. All lamping
options are fully dimmable for achieving the perfect light level or to
extend lamp life. Phantom AC Series light strips are available in eight
popular painted colors as well as premium metals such as polished
brass, satin brass, polished stainless steel, satin stainless steel and
natural copper. Phantom Lighting is all about seeing the light, not the
fixture!
FESTO
TOON LIGHTING STRIPS
THE AC SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display applications
—
Current carrying concealed custom shelf supports, with no unsightly
exposed wiring or connectors
—
An ideal solution for new shelving projects where support pins and
drilled holes are preferred over standard exposed metal shelf supports
—
Paint grip galvanized metal trim with unique glare shields specifically
designed for horizontal shelf or display lighting applications
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
AC
2
AC
1
2
3
4
3
4
6
CUSTOM
4
0.6
3
5
10
0.6
12
24
12
LAMP TYPE
272
274
352
354
502
504
XFR
XCL
LEAD TYPE
2700K 12V
2700K 24V
3500K 12V
3500K 24V
5000K 12V
5000K 24V
XENON FROSTED
XENON CLEAR
272
AD
(FOR AC
SERIES AND
AE SERIES
ONLY)
AD
LEAD
LENGTH
6”
6”
FINISH
FW
GW
FB
GB
LB
MB
AL
UF
CC
FLAT WHITE
GLOSS WHITE
FLAT BLACK
GLOSS BLACK
LIGHT BEIGE
MEDIUM BROWN
ALMOND
UNFINISHED
CUSTOM COLOR
PB
SB
PS
SS
NC
POLISHED BRASS
SATIN BRASS
POLISHED STAINLESS
SATIN STAINLESS
NATURAL COPPER
MB
STRIP
LENGTH
(INCHES)
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AC SERIES TRIM PROFILES
TRIM 1
TRIM 2
TRIM 3
TRIM 4
3/4”
3/4
3/4”
3/4”
3/4”
1”
3/4”
1”
3/4”
1/4”
Beam Spread
120
0 B
150 B
Bea
eam Spread
1/4”
3/8”
o
o
o
o
92 Beam
am Spread
1/2”
83 Bea
Beam Spread
LAMPS
Festoon lamps are available in 3 watt, 5 watt, and 10 watt, in both 12VAC and 24VAC. Xenon lamps (2,800o K) typically produce a whiter
light and are used for display lighting. The light from an incandescent lamp (2,600o K) is warmer in color, and more conducive to residential
applications. The average life for a incandescent lamp is 7,500 hours and 20,000 hours for xenon festoon lamps. LED festoon lamps
are available in a 0.6 watt, 12VAC and 24VAC models in several popular color temperatures such as 2,700oK, 3,500oK and 5,000oK. LED
festoon lamps produce very little forward throw heat, no UV rays and have an average lamp life of 50,000 hours. LED festoon lamps are
perfect for retrofit applications or new projects that require a bright, efficient light source in hard to reach areas.
INCANDESCENT
XENON
LED
15/16”
15/16”
1”
3/8”
3/8”
1 3/4”
5/8”
1 3/4”
1 3/4”
EXPLODED VIEW
Space Requirement
For best results, a wood
reveal should be used to
conceal the fixture. For
applications above eye
level use trim #4 and
extend wood trim as
necessary. Allow 1” clearance between light
fixture and holes.
Buss Bar Supports (5/8” W X 1/4” D)
Heavy duty steel buss bars are concealed
during construction and engineered to
perfectly align with 8 x 32 threaded holes
drilled 32 mm on center. This system totally
hides all the wiring and allows you to use the
drilled pin method of shelf support. Consult
the factory for other spacing options.
Brass Contact Pads
Brass contact pads are
designed to transfer electricity
from the shelf support clip to
5/8” the individual fixtures utilizing
5/8”
a safe low voltage current.
Contact is made when the shelf is installed.
Lighting Strip
Each lighting strip may contain one or more
festoon lamps with spacing 4, 6 or 8 inches
on center. For best results, always use a matte
finish on the back of the cabinet to minimize
reflections or glare.
Lug Connector
Heavy duty lug connectors are used to
connect the wire to the metal buss bars back
to the power supply. These connections
should remain accessible for service and
maintenance.
Brass Support Clips
3/4” Brass support clips are
designed to transfer electricity
from the concealed buss
bar to the brass contact pad
mounted on the bottom of the
7/8” shelves utilizing a safe low
3/4”
voltage current.
Standard
right angle pins should be used to support
the back of each shelf and are not included
in the kit.
Transformer
Magnetic transformers are sized to match the
total wattage of your lighting load and come
equipped with one or more secondary circuit
breakers. (See transformer sheet for more
sizing information and amperage calculations)
TRANSFORMER
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total amperage. (watts / voltage = amperage). Refer to the table to
calculate wire size and fusing requirements or see transformer page for more specific details.
SPECIFICATIONS
100
VA
150
VA
250
VA
500
VA
750
VA
1000
VA
1200
VA
MAXIMUM WATTAGE
80
120
200
400
600
800
1000
HEIGHT (H)
6 3/4”
6 3/4”
6 3/4”
8 1/4”
8 1/4”
8 1/4”
10 1/4”
WIDTH (W)
4 7/8”
4 7/8”
4 7/8”
5 5/8”
5 5/8”
5 5/8”
5 5/8”
DEPTH (D)
4 5/8”
4 5/8”
4 5/8”
5 1/4”
5 1/4”
5 1/4”
5 1/4”
12 VOLT (CB)
(1) 10A
(1) 15A
(1) 25A
(2) 25A
(3) 25A
(4) 25A
24 VOLT (CB)
(1) 5A
(1) 7A
(1) 10A
(1) 25A
(2) 15A
(2) 25A
(2) 25A
WEIGHT (LBS)
10
11
13
19
19
28
28
12V PART #’s
MT102
MT152
MT252
MT502
MT752 MT1002
24V PART #’s
MT104
MT154
MT254
MT504
MT754 MT1004 MT1204
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AE SERIES
ADJUSTABLE
EXPOSED
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom AE Series (adjustable exposed) light strips provide the
ultimate performance and flexibility as a seamless, concealed
low voltage linear lighting source. All Phantom AE Series lighting
strips are manufactured to your exact specifications using a
variety of custom metal glare shields so that the light is always
perfectly controlled while keeping the fixture out of sight. Lamping
options include 3 watt, 5 watt, and 10 watt Incandescent festoon
lamps (rated for 7,500 hours) or Xenon festoon lamps (rated for
up to 20,000 hours). Energy efficient 0.6 watt 12VAC LED lamps
are ideal for applications where energy code compliance is an
issue or a major consideration. All lamping options are fully
dimmable for achieving the perfect light level or to extend lamp
life. Phantom AE Series light strips are available in eight popular
painted colors as well as premium metals such as polished
brass, satin brass, polished stainless steel, satin stainless steel
and natural copper. Phantom Lighting is all about seeing the
light, not the fixture!
FESTOON LIGHTING STRIPS
THE AE SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display applications
—
Patented current carrying concealed custom shelf supports, with
no unsightly exposed wiring or connectors
—
Paint grip galvanized metal trim with unique glare shields specifically
designed for horizontal shelf or display lighting applications
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
AE
2
AE
1
2
3
4
5
3
4
6
CUSTOM
4
0.6
3
5
10
0.6
12
24
12
LAMP TYPE
272
274
352
354
502
504
XFR
XCL
LEAD TYPE
AD (FOR AC
2700K 12V
SERIES AND
2700K 24V
AE SERIES
3500K 12V
ONLY)
3500K 24V
5000K 12V
5000K 24V
XENON FROSTED
XENON CLEAR
272
AD
LEAD
LENGTH
6”
12”
FINISH
FW
GW
FB
GB
LB
MB
AL
UF
CC
FLAT WHITE
GLOSS WHITE
FLAT BLACK
GLOSS BLACK
LIGHT BEIGE
MEDIUM BROWN
ALMOND
UNFINISHED
CUSTOM COLOR
PB
SB
PS
SS
NC
POLISHED BRASS
SATIN BRASS
POLISHED STAINLESS
SATIN STAINLESS
NATURAL COPPER
MB
STRIP
LENGTH
(INCHES)
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AE SERIES TRIM PROFILES
TRIM 1
TRIM 2
TRIM 3
TRIM 4
3/4”
3/4
3/4”
3/4”
3/4”
1”
3/4”
1”
3/4”
1/4”
Beam Spread
120
0 B
150 B
Bea
eam Spread
1/4”
3/8”
o
o
o
o
92 Beam
am Spread
1/2”
83 Bea
Beam Spread
LAMPS
Festoon lamps are available in 3 watt, 5 watt, and 10 watt, in both 12VAC and 24VAC. Xenon lamps (2,800o K) typically produce a whiter
light and are used for display lighting. The light from an incandescent lamp (2,600o K) is warmer in color, and more conducive to residential
applications. The average life for a incandescent lamp is 7,500 hours and 20,000 hours for xenon festoon lamps. LED festoon lamps
are available in a 0.6 watt, 12VAC and 24VAC models in several popular color temperatures such as 2,700oK, 3,500oK and 5,000oK. LED
festoon lamps produce very little forward throw heat, no UV rays and have an average lamp life of 50,000 hours. LED festoon lamps are
perfect for retrofit applications or new projects that require a bright, efficient light source in hard to reach areas.
INCANDESCENT
XENON
LED
15/16”
15/16”
1”
3/8”
3/8”
1 3/4”
5/8”
1 3/4”
1 3/4”
EXPLODED VIEW
Exposed Steel Shelf
Supports (by others)
You can easily energize new
or existing steel supports to
conduct safe low voltage
3/4”
current for our exposed wiring
method. This system virtually eliminates
all the visible wiring and allows you to use
standard shelf support clips. The use of
aluminum shelf supports is not recommended!
3/4”
Space Requirement
For best results, a wood
reveal should be used to
conceal the fixture. For
applications above eye
level use trim #4 and extend
wood trim as necessary.
Allow a minimum clearance of 1” between light
and shelf support.
Brass Contact Pads
Brass contact pads are
designed to transfer electricity
from the shelf support clip to
5/8” the individual fixtures utilizing
5/8”
a safe low voltage current.
Contact is made when the shelf is installed. No
tools are required to rearrange the shelves!
Lighting Strip
Each lighting strip may contain one or more
festoon lamps with spacing 4, 6 or 8 inches
on center. For best results, always use a matte
finish on the back of the cabinet to minimize
reflections or glare.
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
Transformer
Magnetic transformers are sized to match the
total wattage of your lighting load and come
equipped with one or more secondary circuit
breakers. See transformer sheet for more
sizing information and amperage calculations)
TRANSFORMER
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total amperage. (watts / voltage = amperage). Refer to the table to
calculate wire size and fusing requirements or see transformer page for more specific details.
SPECIFICATIONS
100
VA
150
VA
250
VA
500
VA
750
VA
1000
VA
1200
VA
MAXIMUM WATTAGE
80
120
200
400
600
800
1000
HEIGHT (H)
6 3/4”
6 3/4”
6 3/4”
8 1/4”
8 1/4”
8 1/4”
10 1/4”
WIDTH (W)
4 7/8”
4 7/8”
4 7/8”
5 5/8”
5 5/8”
5 5/8”
5 5/8”
DEPTH (D)
4 5/8”
4 5/8”
4 5/8”
5 1/4”
5 1/4”
5 1/4”
5 1/4”
12 VOLT (CB)
(1) 10A
(1) 15A
(1) 25A
(2) 25A
(3) 25A
(4) 25A
24 VOLT (CB)
(1) 5A
(1) 7A
(1) 10A
(1) 25A
(2) 15A
(2) 25A
(2) 25A
WEIGHT (LBS)
10
11
13
19
19
28
28
12V PART #’s
MT102
MT152
MT252
MT502
MT752 MT1002
24V PART #’s
MT104
MT154
MT254
MT504
MT754 MT1004 MT1204
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
CM SERIES
COVE
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom CM Series (cove lighting) strips provide the ultimate
performance and flexibility as a seamless, indirect low voltage linear
lighting source. All Phantom CM Series lighting strips are manufactured
to your exact specifications using a variety of custom metal glare
shields so that the light is always perfectly controlled while keeping the
fixture out of sight. Lamping options include 3 watt, 5 watt, and 10 watt
Incandescent festoon lamps (rated for 7,500 hours) or Xenon festoon
lamps (rated for up to 20,000 hours). Energy efficient 0.6 watt 12VAC
LED lamps are ideal for applications where energy code compliance
is an issue or a major consideration. All lamping options are fully
dimmable for achieving the perfect light level or to extend lamp life.
Phantom CM Series light strips are available in eight popular painted
colors and three custom trim profiles. Phantom Lighting is all about
seeing the light, not the fixture!
FESTOON LIGHTING STRIPS
THE CM SERIES FEATURES
—
High performance, low profile, concealed linear lighting source for
new construction or retrofit architectural lighting applications
—
Paint grip galvanized metal trims specifically designed for cove or
indirect lighting applications
—
May be field cut or notched for radius cove lighting applications
—
Continous feed through capacity, up to 13.33 amps per fixture
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
CM
2
CM
1
2
3
4
5
1
4
6
CUSTOM
4
0.6
3
5
10
0.6
12
24
12
LAMP TYPE
272
274
352
354
502
504
XFR
XCL
LEAD TYPE
2700K 12V
2700K 24V
3500K 12V
3500K 24V
5000K 12V
5000K 24V
XENON FROSTED
XENON CLEAR
272
DL DOUBLE LEADS
DL
LEAD
LENGTH
6”
12”
18”
24”
36”
CUSTOM
6”
FINISH
FW
GW
FB
GB
LB
MB
AL
UF
CC
FLAT WHITE
GLOSS WHITE
FLAT BLACK
GLOSS BLACK
LIGHT BEIGE
MEDIUM BROWN
ALMOND
UNFINISHED
CUSTOM COLOR
PB
SB
PS
SS
NC
POLISHED BRASS
SATIN BRASS
POLISHED STAINLESS
SATIN STAINLESS
NATURAL COPPER
MB
STRIP
LENGTH
(INCHES)
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
CM SERIES TRIM PROFILES
TRIM 1
TRIM 5
TRIM 2
o
150 Be
Beam Spread
o
Beam Spread
120 Be
3/4”
o
166 Beam Spread
S
1”
3/4”
3/4”
5/8”
LAMPS
3/4”
5/8”
Festoon lamps are available in 3 watt, 5 watt, and 10 watt, in both 12VAC and 24VAC. Xenon lamps (2,800o K) typically produce a whiter
light and are used for display lighting. The light from an incandescent lamp (2,600o K) is warmer in color, and more conducive to residential
applications. The average life for a incandescent lamp is 7,500 hours and 20,000 hours for xenon festoon lamps. LED festoon lamps
are available in a 0.6 watt, 12VAC and 24VAC models in several popular color temperatures such as 2,700oK, 3,500oK and 5,000oK. LED
festoon lamps produce very little forward throw heat, no UV rays and have an average lamp life of 50,000 hours. LED festoon lamps are
perfect for retrofit applications or new projects that require a bright, efficient light source in hard to reach areas.
INCANDESCENT
XENON
LED
15/16”
15/16”
1”
3/8”
3/8”
1 3/4”
5/8”
1 3/4”
1 3/4”
EXPLODED VIEW
Radius Installation
Phantom trim may be field
cut or notched to achieve a
radius or irregular shape.
Beam/Truss Application
Phantom lighting strips may be installed in
exposed beams or trusses by using Trim #5
for indirect lighting applications. Wood strips
can be added between trusses to support the
lighting strips or they may be routed directly
into the tops of beams.
Transformer
Magnetic transformers are sized to match
the total wattage of your lighting load and
come equipped with one or more secondary
circuit breakers. Electronic transformers in 75,
150 and 300 watt models are available upon
request. (See transformer sheet for more
sizing information and amperage calculations)
Wall
1” min.
3” min.
Ceiling
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
3” min.
Space Requirements
To achieve continuous illumination CM Series
strips require a 3” minimum clearance from the
lamp to any adjacent surface when using 4” on
center lamp spacing. Increase clearance to 5”
for delicate materials.
TRANSFORMER
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total amperage. (watts / voltage = amperage). Refer to the table to
calculate wire size and fusing requirements or see transformer page for more specific details.
SPECIFICATIONS
100
VA
150
VA
250
VA
500
VA
750
VA
1000
VA
1200
VA
MAXIMUM WATTAGE
80
120
200
400
600
800
1000
HEIGHT (H)
6 3/4”
6 3/4”
6 3/4”
8 1/4”
8 1/4”
8 1/4”
10 1/4”
WIDTH (W)
4 7/8”
4 7/8”
4 7/8”
5 5/8”
5 5/8”
5 5/8”
5 5/8”
DEPTH (D)
4 5/8”
4 5/8”
4 5/8”
5 1/4”
5 1/4”
5 1/4”
5 1/4”
12 VOLT (CB)
(1) 10A
(1) 15A
(1) 25A
(2) 25A
(3) 25A
(4) 25A
24 VOLT (CB)
(1) 5A
(1) 7A
(1) 10A
(1) 25A
(2) 15A
(2) 25A
(2) 25A
WEIGHT (LBS)
10
11
13
19
19
28
28
12V PART #’s
MT102
MT152
MT252
MT502
MT752 MT1002
24V PART #’s
MT104
MT154
MT254
MT504
MT754 MT1004 MT1204
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
HM SERIES
HORIZONTAL
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom HM Series (horizontal mount) light strips provide the ultimate
performance and flexibility as a seamless, concealed low voltage
linear lighting source. All Phantom HM Series lighting strips are
manufactured to your exact specifications using a variety of custom
metal glare shields so that the light is always perfectly controlled while
keeping the fixture out of sight. Lamping options include 3 watt, 5 watt,
and 10 watt Incandescent festoon lamps (rated for 7,500 hours) or
Xenon festoon lamps (rated for up to 20,000 hours). Energy efficient
0.6 watt 12VAC LED lamps are ideal for applications where energy
code compliance is an issue or a major consideration. All lamping
options are fully dimmable for achieving the perfect light level or to
extend lamp life. Phantom HM Series light strips are available in eight
popular painted colors as well as premium metals such as polished
brass, satin brass, polished stainless steel, satin stainless steel and
natural copper. Phantom Lighting is all about seeing the light, not the
fixture!
FESTOON LIGHTING STRIPS
THE HM SERIES FEATURES
—
Designed for hard wiring applications such as antiques, free
standing furniture, or built in bookshelves with fixed shelving
—
Paint grip galvanized metal trim with unique glare shields specifically
designed for horizontal shelf or display lighting applications
—
Customizable wiring methods designed for every application
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
HM
2
HM
1
2
3
4
5
3
4
6
CUSTOM
4
0.6
3
5
10
0.6
12
24
12
LAMP TYPE
272
274
352
354
502
504
XFR
XCL
LEAD TYPE
2700K 12V
2700K 24V
3500K 12V
3500K 24V
5000K 12V
5000K 24V
XENON FROSTED
XENON CLEAR
272
LEAD
LENGTH
6”
12”
LR LEADS RIGHT
18”
LL LEADS LEFT
24”
36”
(WHEN FACING
THE APPLICATION) CUSTOM
DL DOUBLE LEADS
LR
6”
FINISH
FW
GW
FB
GB
LB
MB
AL
UF
CC
FLAT WHITE
GLOSS WHITE
FLAT BLACK
GLOSS BLACK
LIGHT BEIGE
MEDIUM BROWN
ALMOND
UNFINISHED
CUSTOM COLOR
PB
SB
PS
SS
NC
POLISHED BRASS
SATIN BRASS
POLISHED STAINLESS
SATIN STAINLESS
NATURAL COPPER
MB
STRIP
LENGTH
(INCHES)
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
HM SERIES TRIM PROFILES
TRIM 1
TRIM 2
TRIM 3
TRIM 4
3/4”
3/4
3/4”
3/4”
3/4”
1”
3/4”
1”
3/4”
1/4”
Beam Spread
120
0 B
150 B
Bea
eam Spread
1/4”
3/8”
o
o
o
o
92 Beam
am Spread
1/2”
83 Bea
Beam Spread
LAMPS
Festoon lamps are available in 3 watt, 5 watt, and 10 watt, in both 12VAC and 24VAC. Xenon lamps (2,800o K) typically produce a whiter
light and are used for display lighting. The light from an incandescent lamp (2,600o K) is warmer in color, and more conducive to residential
applications. The average life for a incandescent lamp is 7,500 hours and 20,000 hours for xenon festoon lamps. LED festoon lamps
are available in a 0.6 watt, 12VAC and 24VAC models in several popular color temperatures such as 2,700oK, 3,500oK and 5,000oK. LED
festoon lamps produce very little forward throw heat, no UV rays and have an average lamp life of 50,000 hours. LED festoon lamps are
perfect for retrofit applications or new projects that require a bright, efficient light source in hard to reach areas.
INCANDESCENT
XENON
LED
15/16”
15/16”
1”
3/8”
3/8”
1 3/4”
5/8”
1 3/4”
1 3/4”
EXPLODED VIEW
Lighting Strip
Each lighting strip may contain one or more
festoon lamps with spacing 4, 6 or 8 inches on
center. Consult the factory if you would like
to customize your lighting strips by positioning
lamps equally between fixed shelves. For best
results, always use a matte finish on the back
of the cabinet to minimize reflections or glare.
Concealed Wiring
For fixed shelving, furniture or retrofit
applications it may be necessary to conceal
wiring from individual fixtures back to the
transformer. We are happy to manufacture
your lighting strips with long leads to
accommodate any application. Consult factory
for other fixed wiring methods.
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
Transformer
Magnetic transformers are sized to match
the total wattage of your lighting load and
come equipped with one or more secondary
circuit breakers. Electronic transformers in
75 and 150 watt models are available upon
request. (See transformer sheet for more
sizing information and amperage calculations)
TRANSFORMER
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total amperage. (watts / voltage = amperage). Refer to the table to
calculate wire size and fusing requirements or see transformer page for more specific details.
SPECIFICATIONS
100
VA
150
VA
250
VA
500
VA
750
VA
1000
VA
1200
VA
MAXIMUM WATTAGE
80
120
200
400
600
800
1000
HEIGHT (H)
6 3/4”
6 3/4”
6 3/4”
8 1/4”
8 1/4”
8 1/4”
10 1/4”
WIDTH (W)
4 7/8”
4 7/8”
4 7/8”
5 5/8”
5 5/8”
5 5/8”
5 5/8”
DEPTH (D)
4 5/8”
4 5/8”
4 5/8”
5 1/4”
5 1/4”
5 1/4”
5 1/4”
12 VOLT (CB)
(1) 10A
(1) 15A
(1) 25A
(2) 25A
(3) 25A
(4) 25A
24 VOLT (CB)
(1) 5A
(1) 7A
(1) 10A
(1) 25A
(2) 15A
(2) 25A
(2) 25A
WEIGHT (LBS)
10
11
13
19
19
28
28
12V PART #’s
MT102
MT152
MT252
MT502
MT752 MT1002
24V PART #’s
MT104
MT154
MT254
MT504
MT754 MT1004 MT1204
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TL SERIES
TASK
LIGHTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom TL Series (task lighting) strips provide the ultimate performance
and flexibility as a seamless, concealed low voltage linear lighting
source. All Phantom TL Series lighting strips are manufactured to your
exact specifications using a variety of custom metal glare shields so
that the light is always perfectly controlled while keeping the fixture out
of sight. Lamping options include 3 watt, 5 watt, and 10 watt Incandescent
festoon lamps (rated for 7,500 hours) or Xenon festoon lamps (rated
for up to 20,000 hours). Energy efficient 0.6 watt 12VAC LED lamps
are ideal for applications where energy code compliance is an issue
or a major consideration. All lamping options are fully dimmable for
achieving the perfect light level or to extend lamp life. Phantom TL
Series light strips are available in eight popular painted colors as well
as premium metals such as polished brass, satin brass, polished
stainless steel, satin stainless steel and natural copper. Phantom
Lighting is all about seeing the light, not the fixture!
FESTOON LIGHTING STRIPS
THE TL SERIES FEATURES
—
Designed for task lighting applications in areas such as desks,
under cabinets, butler’s pantry, workstations and offices
—
Paint grip galvanized metal trims with unique glare shields specifically
designed for horizontal task lighting applications
—
Customizable wiring methods designed for every application
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
TL
2
TL
1
2
3
4
5
1
4
6
CUSTOM
4
0.6
3
5
10
0.6
12
24
12
LAMP TYPE
272
274
352
354
502
504
XFR
XCL
LEAD TYPE
2700K 12V
2700K 24V
3500K 12V
3500K 24V
5000K 12V
5000K 24V
XENON FROSTED
XENON CLEAR
272
LEAD
LENGTH
6”
12”
LR LEADS RIGHT
18”
LL LEADS LEFT
24”
36”
(WHEN FACING
CUSTOM
THE APPLICATION)
DL DOUBLE LEADS
LR
6”
FINISH
FW
GW
FB
GB
LB
MB
AL
UF
CC
FLAT WHITE
GLOSS WHITE
FLAT BLACK
GLOSS BLACK
LIGHT BEIGE
MEDIUM BROWN
ALMOND
UNFINISHED
CUSTOM COLOR
PB
SB
PS
SS
NC
POLISHED BRASS
SATIN BRASS
POLISHED STAINLESS
SATIN STAINLESS
NATURAL COPPER
MB
STRIP
LENGTH
(INCHES)
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2012 Phantom Lighting Systems
TL SERIES TRIM PROFILES
TRIM 1
TRIM 2
TRIM 3
TRIM 4
3/4”
3/4
3/4”
3/4”
3/4”
1”
3/4”
1”
3/4”
1/4”
Beam Spread
120
0 B
150 B
Bea
eam Spread
1/4”
3/8”
o
o
o
o
92 Beam
am Spread
1/2”
83 Bea
Beam Spread
LAMPS
Festoon lamps are available in 3 watt, 5 watt, and 10 watt, in both 12VAC and 24VAC. Xenon lamps (2,800o K) typically produce a whiter
light and are used for display lighting. The light from an incandescent lamp (2,600o K) is warmer in color, and more conducive to residential
applications. The average life for a incandescent lamp is 7,500 hours and 20,000 hours for xenon festoon lamps. LED festoon lamps
are available in a 0.6 watt, 12VAC and 24VAC models in several popular color temperatures such as 2,700oK, 3,500oK and 5,000oK. LED
festoon lamps produce very little forward throw heat, no UV rays and have an average lamp life of 50,000 hours. LED festoon lamps are
perfect for retrofit applications or new projects that require a bright, efficient light source in hard to reach areas.
INCANDESCENT
XENON
LED
15/16”
15/16”
1”
3/8”
3/8”
1 3/4”
5/8”
1 3/4”
1 3/4”
EXPLODED VIEW
Wire Sleeve Tip
We recommend that you fabricate a small
removable wood cover for the purpose of
hiding the wires between the fixture and where
the wire exits the wall. Most applications
require an end feed connection.
Lighting Strip Location
For best results, always mount the lights
behind the front lip of the upper cabinet and
use a matte finish on the back of the cabinet
or wall to minimize glare and reflections. Note:
Stone finishes such as granite, marble and
ceramic tile are notorious for reflecting lamp
images from normal viewing angles.
Transformer (Remote Mount)
Magnetic transformers are sized to match the
total wattage of your lighting load and come
equipped with one or more secondary circuit
breakers. (See transformer sheet for more
sizing information and amperage calculations)
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
Lighting Strip Tip
When Trim 1 or Trim 2 are used it may be
necessary to field adjust lighting strips up or
down to accommodate larger wood reveals
and fine tune lighting coverage.
TRANSFORMER
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total amperage. (watts / voltage = amperage). Refer to the table to
calculate wire size and fusing requirments or see transformer page for more specific details.
SPECIFICATIONS
100
VA
150
VA
250
VA
500
VA
750
VA
1000
VA
1200
VA
MAXIMUM WATTAGE
80
120
200
400
600
800
1000
HEIGHT (H)
6 3/4”
6 3/4”
6 3/4”
8 1/4”
8 1/4”
8 1/4”
10 1/4”
WIDTH (W)
4 7/8”
4 7/8”
4 7/8”
5 5/8”
5 5/8”
5 5/8”
5 5/8”
DEPTH (D)
4 5/8”
4 5/8”
4 5/8”
5 1/4”
5 1/4”
5 1/4”
5 1/4”
12 VOLT (CB)
(1) 10A
(1) 15A
(1) 25A
(2) 25A
(3) 25A
(4) 25A
24 VOLT (CB)
(1) 5A
(1) 7A
(1) 10A
(1) 25A
(2) 15A
(2) 25A
(2) 25A
WEIGHT (LBS)
10
11
13
19
19
28
28
12V PART #’s
MT102
MT152
MT252
MT502
MT752 MT1002
24V PART #’s
MT104
MT154
MT254
MT504
MT754 MT1004 MT1204
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2012 Phantom Lighting Systems
VM SERIES
VERTICAL
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
Phantom VM Series (vertical mount) light strips provide the ultimate
performance and flexibility as a seamless, concealed low voltage
linear lighting source. All Phantom VM Series lighting strips are
manufactured to your exact specifications using a variety of custom
metal glare shields so that the light is always perfectly controlled while
keeping the fixture out of sight. Lamping options include 3 watt, 5
watt, and 10 watt Incandescent festoon lamps (rated for 7,500 hours)
or Xenon festoon lamps (rated for up to 20,000 hours). Energy
efficient 0.6 watt 12VAC LED lamps are ideal for applications where
energy code compliance is an issue or a major consideration. All
lamping options are fully dimmable for achieving the perfect light level
or to extend lamp life. Phantom VM Series light strips are available
in eight popular painted colors as well as premium metals such as
polished brass, satin brass, polished stainless steel, satin stainless
steel and natural copper. Phantom Lighting is all about seeing the light,
not the fixture!
FESTOON LIGHTING STRIPS
THE VM SERIES FEATURES
—
Designed for applications such as antiques, free standing furniture,
or built in bookshelves with fixed shelving or glass shelves
—
Paint grip galvanized metal trim with unique glare shields specifically
designed for vertical shelf or display lighting applications
—
Customizable wiring methods designed for every application
—
Multiple trim shapes available for custom applications or use above
eye level
—
LED, xenon and incandescent festoon lamping options
—
ETL Approved
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
ORDERING INFORMATION
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
VM
2
VM
1
2
3
4
5
4
4
6
CUSTOM
4
0.6
3
5
10
0.6
12
24
12
LAMP TYPE
272
274
352
354
502
504
XFR
XCL
LEAD TYPE
2700K 12V
2700K 24V
3500K 12V
3500K 24V
5000K 12V
5000K 24V
XENON FROSTED
XENON CLEAR
272
LEAD
LENGTH
6”
12”
TOP LEFT
18”
TOP RIGHT
24”
BOTTOM LEFT
36”
BOTTOM RIGHT
CUSTOM
DL DOUBLE LEADS
TL
TR
BL
BR
(WHEN FACING
THE APPLICATION)
BR
6”
FINISH
FW
GW
FB
GB
LB
MB
AL
UF
CC
FLAT WHITE
GLOSS WHITE
FLAT BLACK
GLOSS BLACK
LIGHT BEIGE
MEDIUM BROWN
ALMOND
UNFINISHED
CUSTOM COLOR
PB
SB
PS
SS
NC
POLISHED BRASS
SATIN BRASS
POLISHED STAINLESS
SATIN STAINLESS
NATURAL COPPER
MB
STRIP
LENGTH
(INCHES)
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
VM SERIES TRIM PROFILES
TRIM 1
TRIM 2
TRIM 3
TRIM 4
3/4”
/4”
3/4”
3/4
3/4”
3/4”
1”
3/4”
3/
1/4”
Beam Spread
120
0 B
150 B
Bea
am Spread
3/4”
5/8”
1”
3/4”
o
o
TRIM 5
5/8”
1/4”
3/8”
o
o
92 Beam
am Spread
1/2”
o
83 Bea
Beam Spread
166 Beam
mS
Spread
LAMPS
Festoon lamps are available in 3 watt, 5 watt, and 10 watt, in both 12VAC and 24VAC. Xenon lamps (2,800o K) typically produce a whiter
light and are used for display lighting. The light from an incandescent lamp (2,600o K) is warmer in color, and more conducive to residential
applications. The average life for a incandescent lamp is 7,500 hours and 20,000 hours for xenon festoon lamps. LED festoon lamps
are available in a 0.6 watt, 12VAC and 24VAC models in several popular color temperatures such as 2,700oK, 3,500oK and 5,000oK. LED
festoon lamps produce very little forward throw heat, no UV rays and have an average lamp life of 50,000 hours. LED festoon lamps are
perfect for retrofit applications or new projects that require a bright, efficient light source in hard to reach areas.
INCANDESCENT
XENON
LED
15/16”
15/16”
1”
3/8”
3/8”
1 3/4”
5/8”
1 3/4”
1 3/4”
EXPLODED VIEW
Shelf
1“ min.
Shelf
1“ min.
Shelf
Concealed Wiring
For fixed shelving, furniture or retrofit
applications it may be necessary to conceal
wiring from individual fixtures back to the
transformer. We are happy to manufacture
your lighting strips with long leads to
accommodate any application.
Dual Fixtures
The Phantom fixture
can be attached behind
both vertical stiles,
sending light in each
direction.
Transformer
Magnetic transformers are sized to match the
total wattage of your lighting load and come
equipped with one or more secondary circuit
breakers. Electronic transformers in 75, 150
and 300 watt models are available upon
request. (See transformer sheet for more
sizing information and amperage calculations)
Center Mount
The Phantom fixture
can be attached to the
center vertical stile or
door trim, using trim #5
sending light in both
directions.
Space Requirement
On a cabinet with adjustable shelves, 1” clearance
is required between the
back surface of the stile
and the front of the shelf.
This provides the space to
move shelves without modifying the Phantom
fixture.
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
1“ min.
Shelf
TRANSFORMER
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total amperage. (watts / voltage = amperage). Refer to the table to
calculate wire size and fusing requirements or see transformer page for more specific details.
SPECIFICATIONS
100
VA
150
VA
250
VA
500
VA
750
VA
1000
VA
1200
VA
MAXIMUM WATTAGE
80
120
200
400
600
800
1000
HEIGHT (H)
6 3/4”
6 3/4”
6 3/4”
8 1/4”
8 1/4”
8 1/4”
10 1/4”
WIDTH (W)
4 7/8”
4 7/8”
4 7/8”
5 5/8”
5 5/8”
5 5/8”
5 5/8”
DEPTH (D)
4 5/8”
4 5/8”
4 5/8”
5 1/4”
5 1/4”
5 1/4”
5 1/4”
12 VOLT (CB)
(1) 10A
(1) 15A
(1) 25A
(2) 25A
(3) 25A
(4) 25A
24 VOLT (CB)
(1) 5A
(1) 7A
(1) 10A
(1) 25A
(2) 15A
(2) 25A
(2) 25A
WEIGHT (LBS)
10
11
13
19
19
28
28
12V PART #’s
MT102
MT152
MT252
MT502
MT752 MT1002
24V PART #’s
MT104
MT154
MT254
MT504
MT754 MT1004 MT1204
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TRANSFORMERS
M A G N E T I C P O W E R S U P P LY
LOW VOLTAGE STRIP
FESTOON LIGHTING STRIPS
US
SPECIFICATIONS
100
VA
150
VA
250
VA
500
VA
750
VA
1000
VA
1200
VA
MAXIMUM
WATTAGE
80
120
200
400
600
800
1000
HEIGHT (H)
6 3/4”
6 3/4”
6 3/4”
8 1/4”
8 1/4”
8 1/4”
10 1/4”
WIDTH (W)
4 7/8”
4 7/8”
4 7/8”
5 5/8”
5 5/8”
5 5/8”
5 5/8”
DEPTH (D)
4 5/8”
4 5/8”
4 5/8”
5 1/4”
5 1/4”
5 1/4”
5 1/4”
12 VOLT (CB)
(1) 10A
(1) 15A
(1) 25A
(2) 25A
(3) 25A
(4) 25A
24 VOLT (CB)
(1) 5A
(1) 7A
(1) 10A
(1) 25A
(2) 15A
(2) 25A
(2) 25A
WEIGHT (LBS)
10
11
13
19
19
28
28
12V PART #’s
MT102
MT152
MT252
MT502
MT752 MT1002
24V PART #’s
MT104
MT154
MT254
MT504
MT754 MT1004 MT1204
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total
amperage. (watts / voltage = amperage). Refer to the table
to calculate wire size and fusing requirements.
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
VOLTAGE / WATTAGE
SPACING
4”
1’
2’
3’
4’
5’
6’
7’
8’
9’
10’
1.7W / 12V
WATTAGE
5.10
10.20
15.30
20.40
25.50
30.60
35.70
40.80
45.90
51.00
LED
AMPERAGE
.43
.85
1.28
1.70
2.13
2.55
2.98
3.40
3.83
4.25
3W / 12V
WATTAGE
9
18
27
36
45
54
63
72
81
90
XENON / INCANDESCENT
AMPERAGE
0.75
1.50
2.25
3.00
3.75
4.50
5.25
6.00
6.75
7.50
3W / 24V
WATTAGE
9
18
27
36
45
54
63
72
81
90
XENON / INCANDESCENT
AMPERAGE
0.38
0.75
1.13
1.50
1.88
2.25
2.63
3.00
3.38
3.75
WATTS/VOLTS
4”
5W / 12V
WATTAGE
15
30
45
60
75
90
105
120
135
150
XENON / INCANDESCENT
AMPERAGE
1.25
2.50
3.75
5.00
6.25
7.50
8.75
10.00
11.25
12.5
4”
5W / 24V
XENON / INCANDESCENT
10W / 12V
XENON / INCANDESCENT
4”
10W / 24V
XENON / INCANDESCENT
6”
1.7W / 12V
LED
3W / 12V
XENON / INCANDESCENT
6”
3W / 24V
XENON / INCANDESCENT
5W / 12V
XENON / INCANDESCENT
6”
5W / 24V
XENON / INCANDESCENT
10W / 12V
XENON / INCANDESCENT
6”
10W / 24V
XENON / INCANDESCENT
WATTAGE
15
30
45
60
75
90
105
120
135
150
AMPERAGE
0.63
1.25
1.88
2.50
3.13
3.75
4.38
5.00
5.63
6.25
X
WATTAGE
30
60
90
120
150
X
X
X
X
AMPERAGE
2.50
5.00
7.50
10.00
12.50
X
X
X
X
X
WATTAGE
30
60
90
120
150
180
210
240
270
300
AMPERAGE
1.25
2.50
3.75
5.00
6.25
7.50
8.75
10.00
11.25
12.50
WATTAGE
3.40
6.80
10.20
13.60
17.00
20.40
23.80
27.20
30.60
34.00
2.83
AMPERAGE
.57
.85
1.13
1.42
1.70
1.98
2.27
2.55
WATTAGE
6
12
18
24
30
36
42
48
54
60
AMPERAGE
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
WATTAGE
6
12
18
24
30
36
42
48
54
60
AMPERAGE
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
WATTAGE
10
20
30
40
50
60
70
80
90
100
AMPERAGE
0.83
1.67
2.50
3.33
4.17
5.00
5.83
6.67
7.50
8.33
WATTAGE
10
20
30
40
50
60
70
80
90
100
AMPERAGE
0.42
0.83
1.25
1.67
2.08
2.50
2.92
3.33
3.75
4.17
X
WATTAGE
20
40
60
80
100
120
140
160
X
AMPERAGE
1.67
3.33
5.00
6.67
8.33
10.00
11.67
13.33
X
X
WATTAGE
20
40
60
80
100
120
140
160
180
200
AMPERAGE
0.83
1.67
2.50
3.33
4.17
5.00
5.83
6.67
7.50
8.33
WARNING: THERE IS A LIMIT ON HOW MANY PHANTOM FIXTURES CAN BE CONNECTED IN TANDEM. NO CIRCUIT SHALL
EXCEED 160 WATTS ON 12V AND 320 WATTS ON 24V. MAXIMUM FEED THRU CAPACITY SHALL NOT EXCEED 13.33 AMPS.
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
SECONDARY WIRING DIAGRAMS
24 VAC
12 VAC
H-1 to 120VAC Hot
H-1 to 120VAC Hot
X-1
X-1
24V Common
12V Common
H-2 to 120VAC Com
X-2
X-3
Connected
H-2 to 120VAC Com
X-4
CB
X-3
12V Hot
CB
X-2
X-4
24V Hot
SECONDARY WIRING EXAMPLES
Just because you are installing a low voltage system, it doesn’t mean that you can use low voltage wire! In fact, low voltage current
operates at higher amperage levels than standard 120 volt systems. The current is 10 times greater for a 12 volt system than for a 120
volt system of the same wattage. Consequently, you must use larger wire sizes for 12 and 24 volt systems to minimize voltage drop and
to handle the amperage loads. It is always best to locate your transformer adjacent to the lights, in the center of the run or as short a
distance as possible to maintain lumen output. When at all possible, voltage drop should be limited to 5% loss between the transformer
and the lighting strips.
500VA
PT
250VA
PT
24V Secondary
12V Secondary
25A
120W
300W
110W
180W
1000VA
PT
750VA
PT
24V Secondary
12V Secondary
15A
15A
25A
25A
25A
25A
100W
100W
150W
230W
110W
140W
120W
150W
130W
100W
180W
100W
TERMS AND CONDITIONS
To comply with Phantom Lighting System warranty policies and ETL Standards, all lighting strips must be used in conjunction with
Phantom lighting transformers. All Phantom lighting transformers are ETL Approved for Class 1 applications and are strongly
recommended for proper operation of lighting strips. Phantom transformers should not be located in areas with no ventilation or subject
to high ambient temperatures. If ambient temperatures exceed 115°F (46°C) around the transformer the circuit breakers may nuisance
trip due to excessive heat. CAUTION: FAILURE TO CORRECTLY SIZE PRIMARY AND SECONDARY CONDUCTORS AND OR OVERLOAD
PROTECTION MAY RESULT IN BODILY INJURY OR SERIOUS PROPERTY DAMAGE.
Likewise, Phantom lighting strips should be installed in such a way as to properly dissipate heat. We recommend that you allow a minimum
overall 3” set back from the wall or ceiling plane being illuminated. Not only does this clearance allow the heat to escape, but it allows
room for installation, servicing and changing lamps. If you are using exotic wood, veneers or heat sensitive fabrics we suggest increasing
this clearance from a 3” to 5” set back.
If you have any questions or concerns regarding your application, please contact the factory, a licensed electrician or consult the National
Electric Code.
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TRIM SWATCHES
LIGHTING
STRIPS
LOW VOLTAGE STRIP
TRIM PROFILES
TRIM 1
TRIM 2
TRIM 3
3/4”
3/4”
3/4”
FESTO
TOON LIGHTING STRIPS
3/4”
1”
3/4”
1/4”
3/8”
o
o
Beam Spread
120
0 B
150 B
Beam Spread
TRIM 4
o
92 Beam
am Spread
TRIM 5
3/4”
5/8”
3/4”
5/8”
1”
1/4”
o
1/2”
o
83 Bea
Beam Spread
166 Beam
m Spread
S
TRIM FINISHES
ORDERING INFORMATION
QTY.
3
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
AC
AE
CM
HM
TL
VM
1
2
3
4
5
4
6
CUSTOM
0.6
3
5
10
12
24
LAMP TYPE
272
274
352
354
502
504
XFR
XCL
LEAD TYPE
2700K 12V
2700K 24V
3500K 12V
3500K 24V
5000K 12V
5000K 24V
XENON FROSTED
XENON CLEAR
AD (FOR AC
SERIES AND
AE SERIES
ONLY)
LEAD
LENGTH
6”
DL DOUBLE LEADS
LR LEADS RIGHT
LL LEADS LEFT
TL TOP LEFT
TR TOP RIGHT
BL BOTTOM LEFT
BR BOTTOM RIGHT
(WHEN FACING
THE APPLICATION)
3
VM
4
4
0.6
12
272
DL
12”
FINISH
FW
GW
FB
GB
LB
MB
AL
UF
CC
FLAT WHITE
GLOSS WHITE
FLAT BLACK
GLOSS BLACK
LIGHT BEIGE
MEDIUM BROWN
ALMOND
UNFINISHED
CUSTOM COLOR
PB
SB
PS
SS
NC
POLISHED BRASS
SATIN BRASS
POLISHED STAINLESS
SATIN STAINLESS
NATURAL COPPER
MB
STRIP
LENGTH
(INCHES)
41”
ORDERING EXAMPLE
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ORDERING INFORMATION
DATE
P.O.#
FESTOON LIGHTING STRIPS
JOB NAME
SHIP TO:
BILL TO:
COMPANY NAME
COMPANY NAME
ATTENTION
ATTENTION
ADDRESS
ADDRESS
CITY/STATE/ZIP
CITY/STATE/ZIP
PHONE
PHONE
AGENT
SPECIFIED BY
SHIPPING METHOD
GROUND
2ND DAY
OVERNIGHT
OTHER
SPECIAL INSTRUCTIONS
LIGHTING STRIPS ORDER FORM
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
TRANSFORMERS*
QTY.
PART
NUMBER
VOLTAGE
OPERATING
VOLTAGE
LAMP TYPE
LEAD TYPE
LEAD
LENGTH
FINISH
STRIP
LENGTH
BUSS BARS*
CONNECTOR KITS*
(FOR AC SERIES ONLY)
(FOR AC &AE SERIES ONLY)
QTY.
OVERALL
LENGTH
HOLE
SPACING
QTY.
PART
NUMBER
*INCLUDE ADDITIONAL
NOTES ON BACK
E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.
ORDERING EXAMPLE ON PAGE 2 OF THIS FORM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DATE
P.O.#
JOB NAME
ORDER FORM EXAMPLE
QTY.
TRIM
LAMP
LAMP
OPERATING
SERIES PROFILE SPACING WATTAGE VOLTAGE
3
AC
AE
CM
HM
TL
VM
1
2
3
4
5
4
6
CUSTOM
0.6
3
5
10
12
24
LAMP TYPE
272
274
352
354
502
504
XFR
XCL
2700K 12V
2700K 24V
3500K 12V
3500K 24V
5000K 12V
5000K 24V
XENON FROSTED
XENON CLEAR
LEAD TYPE
LEAD
LENGTH
AD (FOR AC
SERIES AND
AE SERIES
ONLY)
6”
DL DOUBLE LEADS
LR LEADS RIGHT
LL LEADS LEFT
TL TOP LEFT
TR TOP RIGHT
BL BOTTOM LEFT
BR BOTTOM RIGHT
(WHEN FACING
THE APPLICATION)
3
VM
4
4
0.6
TRANSFORMERS*
QTY.
PART
NUMBER
VOLTAGE
OPERATING
VOLTAGE
1
MT152
150
12
12
272
DL
12”
STRIP
LENGTH
FINISH
(INCHES)
FW
GW
FB
GB
LB
MB
AL
UF
CC
FLAT WHITE
GLOSS WHITE
FLAT BLACK
GLOSS BLACK
LIGHT BEIGE
MEDIUM BROWN
ALMOND
UNFINISHED
CUSTOM COLOR
PB
SB
PS
SS
NC
POLISHED BRASS
SATIN BRASS
POLISHED STAINLESS
SATIN STAINLESS
NATURAL COPPER
MB
41”
BUSS BARS*
CONNECTOR KITS*
(FOR AC SERIES ONLY)
(FOR AC &AE SERIES ONLY)
QTY.
OVERALL
LENGTH
SPACING
QTY.
PART
NUMBER
NOTES
TRANSMITTING ELECTRONIC FILES:
SAVE A COPY TO YOUR DESKTOP AND E-MAIL WITH ATTACHMENTS
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TABLE OF
CONTENTS
AC SERIES
ADJUSTABLE
CONCEALED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
The Phantom Elite AC Series of LED Strip Lighting for Shelf and Cabinet
Lighting Applications represents a revolution in strip lighting technology.
These low profile cabinet lights are easily concealed regardless of the
shelf design, giving new definition to the phrase, “See the Light, Not
the Fixture.” Custom mounting trims establish the optimum aiming
angle which allows the contents of any cabinet to be illuminated to
a precise degree at the highest level of aesthetics yet to be seen.
The Phantom Elite Strips are constructed using the highest quality
LED’s in the industry. They are among the brightest LED tape lights
on the market, emitting 67 lumens per foot. Strips are precut to any
desired length to be custom fitted to movable shelves. There are no
visible wires and shelf positions can be changed without any rewiring
whatsoever. Strips are dimmable using a standard low voltage
dimmer and produce a quality of consistent color unmatched by
competing products. Customers may choose from 2700K, 3000K,
and 4000K color temperature options. All Phantom Elite LED Strips
operate on 24VDC Magnetic Power Supplies.
THE PHANTOM ELITE AC SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display cabinets
—
Exclusive current carrying system using concealed metal Buss Bars
and shelf support brackets
—
2700K, 3000K and 4000K Color Temperatures
—
Compact Mounting Trims or Extrusion to optimize Aiming Angle and
concealment
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
LENGTH
PROFILE
DRIVER
AC
ELITE
2700K
3000K
4000K
(INCHES)
E1
E2
E3
3
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
CONNECTOR
AC
ELITE
2700K
33”
E2
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
CDA KIT
AC SERIES
44-45
AE SERIES
46-47
CM SERIES
48-49
HM SERIES
50-51
TL SERIES
52-53
VM SERIES
54-55
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MD20
CDA KIT
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AE SERIES
ADJUSTABLE
EXPOSED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
The Phantom Elite AE Series of LED Strip Lighting for Shelf and Cabinet
Lighting Applications represents a revolution in strip lighting technology.
These low profile cabinet lights are easily concealed regardless of the
shelf design, giving new definition to the phrase, “See the Light, Not the
Fixture.” Custom mounting trims establish the optimum aiming angle
which allows the contents of any cabinet to be illuminated to a precise
degree at the highest level of aesthetics yet to be seen. The Phantom
Elite Series is constructed using the highest quality LED’s in the industry.
They are among the brightest LED tape lights on the market, emitting
67 lumens per foot. Strips are precut to any desired length to be custom
fitted to movable shelves. There are no visible wires and shelf positions
can be changed without any rewiring whatsoever. Strips are dimmable
using a standard low voltage dimmer and produce a quality of
consistent color unmatched by competing products. Customers
may choose from 2700K, 3000K, and 4000K color temperature options.
All Phantom Elite Series LED Strips operate on 24VDC Magnetic Power
Supplies.
THE PHANTOM ELITE AE SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display cabinets
—
Exclusive current carrying system using standard exposed metal
shelf support strips and shelf support clips
—
2700K, 3000K and 4000K Color Temperatures
—
Compact Mounting Extrusion, 5/8”H x 1”W, for 45º Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
AE
ELITE
2700K
3000K
4000K
AC
ELITE
2700K
LENGTH
DRIVER
PROFILE
(INCHES)
E1
E2
E3
3
33”
E2
CONNECTOR
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
EXA KIT
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MD20
EXA KIT
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
CM SERIES
COVE
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom Elite CM Series LED Strip Lighting for Cove Lighting
Applications represents a revolution in strip lighting technology. These
low profile Cove lights measure as small as 3/4”W x 1/4”H, giving
new definition to the phrase, “See the Light, Not the Fixture!” Custom
mounting trims establish precise aiming angles thereby allowing
flat, sloped or tray ceilings to be illuminated to a precise degree at
the highest level of aesthetics yet to be seen. The Phantom Elite is
constructed using the highest quality LED’s in the industry. They are
among the brightest strip lights on the market, emitting 67 lumens
per foot. Strips are precut to desired length and can be custom fitted
to any cove dimensions. Strips are completely dimmable and produce
a quality of consistent color unmatched by competing products.
Choices include 2700K, 3000K, and 4000K color temperature options.
All Phantom Elite Series LED Strips operate on 24V magnetic power
supplies.
THE PHANTOM ELITE SERIES COVE LIGHTS FEATURE
—
2700K, 3000K and 4000K Color Temperatures
—
Precut to length of each straight run, up to 30ft. per Driver Feed
—
Tight spacing for homogeneous light (LED’s 0.67” on centers)
—
67 lumens per foot
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
CM
ELITE
2700K
3000K
4000K
CM
ELITE
2700K
LENGTH
DRIVER
CONNECTOR
FINISH
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
LE
END FEED (LEFT)
RE
END FEED (RIGHT)
(WHEN FACING APPLICATION)
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
MD20
LE
PROFILE
(INCHES)
E1
E2
E4
E5
33”
E4
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
HM SERIES
HORIZONTAL
MOUNT
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE HM Series for Horizontal Shelf Lighting provides
the highest quality in bright, completely concealed shelf lighting.
Unlike other LED ribbon lights whose luminance is impossible to direct,
these LED strip lights are mounted on compact trims that establish
the precise aiming angle for optimum shelf lighting applications. This
gives new meaning to our slogan See the Light, Not the Fixture!
Representing a lower cost alternative to traditional linear lighting
strips, the Phantom ELITE HM Series LED operates at 67 lumens per
foot. Color temperatures include the warm 2700K, the 3000K which
closely mimics halogen, and the crisp white 4000K for custom and
contemporary lighting applications. Phantom ELITE ULTRA HM Series
LED strips operate with 24VDC power supplies and can be dimmed
to meet any desired level with a standard low voltage dimmer. Heat
production is minimal, rated at less than 1.5 watts per foot. Strips are
precut to any desired length and can operate up to 30 linear ft. on one
continuous section.
THE PHANTOM ELITE HM SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood shelves
—
67 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
HM
ELITE
2700K
3000K
4000K
HM
ELITE
2700K
LENGTH
DRIVER
CONNECTOR
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
LE
END FEED (LEFT)
RE
END FEED (RIGHT)
(WHEN FACING APPLICATION)
MD20
LE
PROFILE
(INCHES)
E1
E2
E3
3
33”
E3
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TL SERIES
TASK
LIGHTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom Elite TL series strip lights for task lighting represent a
new era in both utility and aesthetic excellence. With light output of
67 lumens per foot, these LED lighting strips are among the most
powerful low profile LED task lights on the market. The latest advances
in LED technology also allow for minimal heat output, which allows
users to leave them on for extended periods of time without risk of
overheating work areas. TL series strip lights are also dimmable,
operating on 24VDC magnetic power supplies. Various trim options
allow for precise aiming angles for work areas in kitchens, utility rooms,
and commercial work stations. Color temperature options range from the
warm 2700K often used in kitchen task lighting, the halogen equivalent
3000K, often preferred for exceptional color rendition, and the crisp
white 4000K for specialty task lighting in custom, contemporary work
areas. Phantom Elite TL series strip lights use only the highest quality
LED’s that are configured and tested to produce consistent color
binning through the entire linear lighting array.
THE PHANTOM ELITE TL SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood shelves
—
67 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
LENGTH
PROFILE
DRIVER
CONNECTOR
FINISH
TL
ELITE
2700K
3000K
4000K
(INCHES)
E1
E2
E3
3
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
LE
END FEED (LEFT)
RE
END FEED (RIGHT)
(WHEN FACING APPLICATION)
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
TL
ELITE
2700K
33”
E1
MD20
RE
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
VM SERIES
VERTICAL
MOUNT
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom Elite VM Series for Vertical Cabinet Lighting Applications
provides the highest quality in bright, completely concealed cabinet
lighting. Unlike other LED tape lights whose luminance is impossible
to direct, these LED strip lights are mounted on compact metal trims
that establish the precise aiming angle for optimum cabinet lighting
applications. This gives new meaning to our slogan See the Light,
Not the Fixture! Representing a lower cost alternative to traditional
linear lighting strips, the Phantom Elite VM Series LED operates at 67
lumens per foot. Color temperatures include the warm 2700K, the
3000K which closely mimics halogen, and the crisp white 4000K for
custom and contemporary lighting applications. Phantom Elite VM
Series LED tape lighting strips operate with 24VDC power supplies and
can be dimmed to meet any desired level with a standard low voltage
dimmer. Heat production is minimal, rated at less than 1.5 watts per
foot. Strips are precut to any desired length for mounting vertically on
either side of cabinet sections.
THE PHANTOM ELITE VM SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood or glass
shelves
—
67 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
VM
ELITE
2700K
3000K
4000K
VM
ELITE
2700K
LENGTH
DRIVER
CONNECTOR
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
TL
TOP LEFT
TR
TOP RIGHT
BL
BOTTOM LEFT
BR BOTTOM RIGHT
(WHEN FACING APPLICATION)
MD20
BL
PROFILE
(INCHES)
E1
E2
E3
E4
3
33”
E4
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DRIVERS
LED MAGNETIC DC DRIVERS
LOW VOLTAGE STRIP
PRODUCT ID
OUTPUT
VOLTAGE
MAX LOAD
MD20
MD40
MD60
MD96
MD150
20W
40W
60W
96W
150W
LENGTH / WIDTH / DEPTH
24V
24V
24V
24V
24V
5.5” / 2.25” / 2”
5.5” / 2.25” / 2”
6.5” / 2.75” / 2.25”
6.5” / 2.75” / 2.25”
9.5” / 3.25” / 3”
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
DRIVERS56-57
9.5”
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
6.5”
5.5”
73355
greenlighting
3.25”
2.75”
2.25”
TECHNOLOGY
2”
2.25”
3”
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total
amperage. (watts / voltage = amperage). Refer to the table
to calculate wire size and fusing requirements.
COMPATIBLE DIMMERS
Examples of compatible dimmers for use with Phantom Drivers
LUTRON
LEVITON
Adriadni
Vareo
Nova
Ceana
Diva
Glyder
Lyneo
Nova T
Skylark
AYLV-600 Series
VET Series
NTLV Series
CNLV-600 Series
DVLV Series
GLV-600 Series
LXLV-600PL Series
NTLV Series
SLV-600 Series
Illumatech
Mural
SureSlide
Toggle Touch
Vizia
IPM Series
MDMO Series
6613-PL Series
TGM10 Series
VPM06
LUTRON HOMEWORKS RF MAESTRO
LUTRON RADIORA2
HRD-6ND-XX Incandescent/MLV Neutral Wire Dimmer
HRD-10ND
RRD 10 ND
RRD 6 ND
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
SEE THE LIGHT
TRIM SWATCHES
NOT THE FIXTURE
LIGHTING
STRIPS
LOW VOLTAGE STRIP
COLOR TEMPERATURE & TRIM FINISHES
Color Temperature Comparison
2700K
Ultra warm
—
Color comparison closest to an incandescent lamp
—
2700K is mainly used in traditional atmospheres
—
INCANDESCENT LIGHT
2700K
2700K
HALOGEN LIGHT
—
Color comparison closest to a halogen lamp
—
3000K works well for task lighting and more contemporary
settings
—
Color comparison closest to a fluorescent lamp
—
4000K is best for contemporary and commercial
applications
3000K
SWATCHES58
4000K
Daylight
—
3000K
HALOGEN LIGHT
3000K
Warm
—
INCANDESCENT LIGHT
NOTE: All LED color temperatures are dimmable without
color variations.
FLUORESENT LIGHT
4000K
FLUORESENT LIGHT
TRIM FINISHES
4000K
WOOD VENEER*
RACEWAY
*NOTE: FORRETRO
TRIMFITE3 ONLY
FOR WIRES
TRIM E2
RACEWAY
FOR WIRES
RACEWAY
FOR WIRES
TRIM E4
TRIM E3
CUSTOM FIT
REVEALED - WOOD VENEER OPTION
RACEWAY
TRIM PROFILES
TRIM E1
FOR WIRES
TRIM E5
1”
145º
150º
5/8”
1”
MIN.
1/2”
1/4”
60º
3/4”
40º
SHELF
SHELF
40º
SHELF
MIN.
SHELF
90º
3/8”
5/16”
5/8”
3/4”
5/16”
1/4” 5/16”
3/4”
5/16” 1/4”
MIN.
MIN.
SHELF
BEAM
MIN.
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
2012 Phantom Lighting Systems
© Copyright 2013
RETRO FIT
REVEALED - WOOD VENEER OPTION
ORDERING INFORMATION
DATE
P.O.#
JOB NAME
SHIP TO:
BILL TO:
COMPANY NAME
COMPANY NAME
ATTENTION
ATTENTION
ADDRESS
ADDRESS
CITY/STATE/ZIP
CITY/STATE/ZIP
PHONE
PHONE
AGENT
SPECIFIED BY
SHIPPING METHOD
£
GROUND
£
2ND DAY
£
OVERNIGHT
£
OTHER
SPECIAL INSTRUCTIONS
LIGHTING STRIPS ORDER FORM
QTY.
SERIES
VERSION
COLOR TEMP
LENGTH
DRIVERS*
PROFILE
DRIVER
CONNECTOR
BUSS BARS*
PART
NUMBER
QTY.
VOLTAGE
FINISH
CONNECTOR KITS*
(FOR AC SERIES ONLY)
QTY.
OVERALL
LENGTH
(FOR AC & AE SERIES ONLY)
HOLE
SPACING
QTY.
ORDER FORM
59-60
PART
NUMBER
*INCLUDE ADDITIONAL
NOTES ON BACK
E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.
ORDERING EXAMPLE ON PAGE 2 OF THIS FORM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
OUR OTHER PRODUCTS
SEE THE LIGHT
NOT THE FIXTURE
TM
SEE THE LIGHT
NOT THE FIXTURE
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AC SERIES
ADJUSTABLE
CONCEALED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
The Phantom Elite AC Series of LED Strip Lighting for Shelf and Cabinet
Lighting Applications represents a revolution in strip lighting technology.
These low profile cabinet lights are easily concealed regardless of the
shelf design, giving new definition to the phrase, “See the Light, Not
the Fixture.” Custom mounting trims establish the optimum aiming
angle which allows the contents of any cabinet to be illuminated to
a precise degree at the highest level of aesthetics yet to be seen.
The Phantom Elite Strips are constructed using the highest quality
LED’s in the industry. They are among the brightest LED tape lights
on the market, emitting 67 lumens per foot. Strips are precut to any
desired length to be custom fitted to movable shelves. There are no
visible wires and shelf positions can be changed without any rewiring
whatsoever. Strips are dimmable using a standard low voltage
dimmer and produce a quality of consistent color unmatched by
competing products. Customers may choose from 2700K, 3000K,
and 4000K color temperature options. All Phantom Elite LED Strips
operate on 24VDC Magnetic Power Supplies.
THE PHANTOM ELITE AC SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display cabinets
—
Exclusive current carrying system using concealed metal Buss Bars
and shelf support brackets
—
2700K, 3000K and 4000K Color Temperatures
—
Compact Mounting Trims or Extrusion to optimize Aiming Angle and
concealment
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
AC
VERSION
ELITE
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
CDA KIT
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
AC
ELITE
2700K
33”
E2
MD20
CDA KIT
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AC ELITE SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
TRIM 3
5/8”
1”
3/4”
3/4”
60º
3/8”
8”
1/2”
1/2
1/4”
5/8”
150º
3/4”
145º
70º
90º
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 1.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
RACEWAY
Space Requirement
For best results, a wood
reveal should be used
to conceal the fixture.
For applications above
eye level use and extend
wood trim as necessary.
Allow 1” clearance between light fixture and
holes.
Brass Contact Pads
Brass contact pads are
designed to transfer electricity
5/8” from the shelf support clip to
5/8”
the individual fixtures utilizing
a safe low voltage current. Contact is made
when the shelf is installed. No tools are
required to rearrange the shelves!
FOR WIRES
7/8”
SHELF
MIN.
Brass Support Clips
3/4” Brass support clips are
designed to transfer electricity
from the concealed buss
bar to the brass contact pad
mounted on the bottom of the
7/8”
3/4”
shelves utilizing a safe low
voltage current. Standard right angle pins
should be used to support the back of each
shelf and are not included in the kit.
Lighting Strip
Each lighting strip contains leds spaced at
0.67 inch on center. For best results, always
use a matte finish on the back of the cabinet
to minimize reflections or glare.
Buss Bar Supports (5/8” W X 1/4” D)
Heavy duty steel buss bars are concealed
during construction and engineered to
perfectly align with 8 x 32 threaded holes
drilled 32 mm on center. This system
totally hides all the wiring and allows you
to use the drilled pin method of shelf
support. Consult the factory for other
spacing options.
Lug Connector
Heavy duty lug connectors are used to
connect the wire to the metal buss bars back
to the power supply. These connections
should remain accessible for service and
maintenance.
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations).
Back Clip Shelf Support
(by others)
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AE SERIES
ADJUSTABLE
EXPOSED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
The Phantom Elite AE Series of LED Strip Lighting for Shelf and Cabinet
Lighting Applications represents a revolution in strip lighting technology.
These low profile cabinet lights are easily concealed regardless of the
shelf design, giving new definition to the phrase, “See the Light, Not the
Fixture.” Custom mounting trims establish the optimum aiming angle
which allows the contents of any cabinet to be illuminated to a precise
degree at the highest level of aesthetics yet to be seen. The Phantom
Elite Series is constructed using the highest quality LED’s in the industry.
They are among the brightest LED tape lights on the market, emitting
67 lumens per foot. Strips are precut to any desired length to be custom
fitted to movable shelves. There are no visible wires and shelf positions
can be changed without any rewiring whatsoever. Strips are dimmable
using a standard low voltage dimmer and produce a quality of
consistent color unmatched by competing products. Customers
may choose from 2700K, 3000K, and 4000K color temperature options.
All Phantom Elite Series LED Strips operate on 24VDC Magnetic Power
Supplies.
THE PHANTOM ELITE AE SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display cabinets
—
Exclusive current carrying system using standard exposed metal
shelf support strips and shelf support clips
—
2700K, 3000K and 4000K Color Temperatures
—
Compact Mounting Extrusion, 5/8”H x 1”W, for 45º Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
AE
VERSION
ELITE
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
EXA KIT
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
AC
ELITE
2700K
33”
E2
MD20
EXA KIT
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AE ELITE SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
TRIM 3
5/8”
1”
3/4”
3/4”
60º
3/8”
8”
1/2”
1/2
1/4”
5/8”
150º
3/4”
145º
70º
90º
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 1.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
RACEWAY
Exposed Steel Shelf
Supports (by others)
You can easily energize new
or existing steel supports to
conduct safe low voltage
3/4”
current for our exposed wiring
method. This system virtually eliminates
all the visible wiring and allows you to use
standard shelf support clips. The use of
aluminum shelf supports is not recommended!
Space Requirement
For best results, a wood
reveal should be used
to conceal the fixture.
For applications above
eye level use and extend
wood trim as necessary.
Allow 1” clearance between light fixture and
holes.
3/4”
FOR WIRES
7/8”
SHELF
MIN.
Brass Contact Pads
Brass contact pads are
designed to transfer electricity
from the shelf support clip to
5/8” the individual fixtures utilizing
5/8”
a safe low voltage current.
Contact is made when the shelf is installed. No
tools are required to rearrange the shelves!
Lighting Strip
Each lighting strip contains leds spaced at
0.67 inch on center. For best results, always
use a matte finish on the back of the cabinet
to minimize reflections or glare.
Dimmer Controls (by others)
Magnetic low voltage drivers should always be
used with a dimmer designated for magnetic
or inductive loads.
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations).
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
CM SERIES
COVE
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom Elite CM Series LED Strip Lighting for Cove Lighting
Applications represents a revolution in strip lighting technology. These
low profile Cove lights measure as small as 3/4”W x 1/4”H, giving
new definition to the phrase, “See the Light, Not the Fixture!” Custom
mounting trims establish precise aiming angles thereby allowing
flat, sloped or tray ceilings to be illuminated to a precise degree at
the highest level of aesthetics yet to be seen. The Phantom Elite is
constructed using the highest quality LED’s in the industry. They are
among the brightest strip lights on the market, emitting 67 lumens
per foot. Strips are precut to desired length and can be custom fitted
to any cove dimensions. Strips are completely dimmable and produce
a quality of consistent color unmatched by competing products.
Choices include 2700K, 3000K, and 4000K color temperature options.
All Phantom Elite Series LED Strips operate on 24V magnetic power
supplies.
THE PHANTOM ELITE SERIES COVE LIGHTS FEATURE
—
2700K, 3000K and 4000K Color Temperatures
—
Precut to length of each straight run, up to 30ft. per Driver Feed
—
Tight spacing for homogeneous light (LED’s 0.67” on centers)
—
67 lumens per foot
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
CM
VERSION
ELITE
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E4
E5
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
LE
END FEED (LEFT)
RE END FEED (RIGHT)
(WHEN FACING APPLICATION)
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
CM
ELITE
2700K
33”
E4
MD20
LE
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
CM ELITE SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E4
145º
150º
TRIM E5
40º
40º
1/2”
1/4”
60º
3/4”
”
3/8”
”
5/16”
5/8””
3/4”
”
5/16”
3/4”
1
1/4”
5/16”
5/16” 1/4”
1
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 1.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations).
G
ILIN
CE
Dimmer Controls (by others)
Magnetic low voltage drivers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
drivers should always be used with a dimmer
designated for electronic loads.
1/2” MIN.
WALL
1 1/2” MIN.
1 1/2”
MIN.
CEILING
1 1/2” MIN.
WALL
1 1/2” MIN.
1”
1”
1 1/2”
MIN.
Beam/Truss Application
Phantom lighting strips may be installed in
exposed beams or trusses by using Trim #5
for indirect lighting applications. Wood strips
can be added between trusses to support the
lighting strips or they may be routed directly
into the tops of beams.
Space Requirements
To achieve continuous illumination CM Series
strips require a 2” minimum clearance from
the strip to any adjacent surface. Increase
clearance to 5” for delicate materials.
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
HM SERIES
HORIZONTAL
MOUNT
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE HM Series for Horizontal Shelf Lighting provides
the highest quality in bright, completely concealed shelf lighting.
Unlike other LED ribbon lights whose luminance is impossible to direct,
these LED strip lights are mounted on compact trims that establish
the precise aiming angle for optimum shelf lighting applications. This
gives new meaning to our slogan See the Light, Not the Fixture!
Representing a lower cost alternative to traditional linear lighting
strips, the Phantom ELITE HM Series LED operates at 67 lumens per
foot. Color temperatures include the warm 2700K, the 3000K which
closely mimics halogen, and the crisp white 4000K for custom and
contemporary lighting applications. Phantom ELITE ULTRA HM Series
LED strips operate with 24VDC power supplies and can be dimmed
to meet any desired level with a standard low voltage dimmer. Heat
production is minimal, rated at less than 1.5 watts per foot. Strips are
precut to any desired length and can operate up to 30 linear ft. on one
continuous section.
THE PHANTOM ELITE HM SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood shelves
—
67 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
HM
VERSION
ELITE
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
LE
END FEED (LEFT)
RE END FEED (RIGHT)
(WHEN FACING APPLICATION)
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
HM
ELITE
2700K
33”
E3
MD20
LE
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
HM ELITE SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
TRIM 3
5/8”
1”
3/4”
3/4”
60º
3/8”
8”
1/2”
1/2
1/4”
5/8”
150º
3/4”
145º
70º
90º
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 1.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
Lighting Strip Location
Lighting Strip
Each lighting strip contains leds spaced at
0.67 inch on center. For best results, always
use a matte finish on the back of the cabinet
to minimize reflections or glare.
RACEWAY
FOR WIRES
Retro Fit
Concealed Wiring
For fixed shelving, furniture or retrofit
applications it may be necessary to conceal
wiring from individual fixtures back to the
transformer. We are happy to manufacture
your lighting strips with long leads to
accommodate any application.
SHELF
1 1/4”
MIN.
RACEWAY
FOR WIRES
Revealed Wood
Veneer Option
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations)
SHELF
1 1/4”
MIN.
RACEWAY
FOR WIRES
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
Custom Fit
SHELF
1 1/4”
MIN.
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TL SERIES
TASK
LIGHTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom Elite TL series strip lights for task lighting represent a
new era in both utility and aesthetic excellence. With light output of
67 lumens per foot, these LED lighting strips are among the most
powerful low profile LED task lights on the market. The latest advances
in LED technology also allow for minimal heat output, which allows
users to leave them on for extended periods of time without risk of
overheating work areas. TL series strip lights are also dimmable,
operating on 24VDC magnetic power supplies. Various trim options
allow for precise aiming angles for work areas in kitchens, utility rooms,
and commercial work stations. Color temperature options range from the
warm 2700K often used in kitchen task lighting, the halogen equivalent
3000K, often preferred for exceptional color rendition, and the crisp
white 4000K for specialty task lighting in custom, contemporary work
areas. Phantom Elite TL series strip lights use only the highest quality
LED’s that are configured and tested to produce consistent color
binning through the entire linear lighting array.
THE PHANTOM ELITE TL SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood shelves
—
67 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
TL
VERSION
ELITE
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
LE
END FEED (LEFT)
RE END FEED (RIGHT)
(WHEN FACING APPLICATION)
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
TL
ELITE
2700K
33”
E1
MD20
RE
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TL ELITE SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
TRIM 3
5/8”
1”
3/4”
3/4”
60º
3/8”
8”
1/2”
1/2
1/4”
5/8”
150º
3/4”
145º
70º
90º
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 1.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
Wire Sleeve Tip
We recommend that you fabricate a small
removable wood cover for the purpose of
hiding the wires between the fixture and where
the wire exits the wall. Most applications
require an end feed connection.
1/4" MIN.
Lighting Strip Location
For best results, always mount the lights
behind the front lip of the upper cabinet and
use a matte finish on the back of the cabinet
or wall to minimize glare and reflections. Note:
Stone finishes such as granite, marble and
ceramic tile are notorious for reflecting lamp
images from normal viewing angles.
Driver (Remote Mount)
Magnetic transformers are sized to match the
total wattage of your lighting load and come
equipped with one or more secondary circuit
breakers. (See transformer sheet for more
sizing information and amperage calculations)
Dimmer Controls (by others)
Magnetic low voltage drivers should always be
used with a dimmer designated for magnetic
or inductive loads.
Lighting Strip Tip
It may be necessary to field adjust lighting
strips up or down to accommodate larger
wood reveals and fine tune lighting coverage.
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
VM SERIES
VERTICAL
MOUNT
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom Elite VM Series for Vertical Cabinet Lighting Applications
provides the highest quality in bright, completely concealed cabinet
lighting. Unlike other LED tape lights whose luminance is impossible
to direct, these LED strip lights are mounted on compact metal trims
that establish the precise aiming angle for optimum cabinet lighting
applications. This gives new meaning to our slogan See the Light,
Not the Fixture! Representing a lower cost alternative to traditional
linear lighting strips, the Phantom Elite VM Series LED operates at 67
lumens per foot. Color temperatures include the warm 2700K, the
3000K which closely mimics halogen, and the crisp white 4000K for
custom and contemporary lighting applications. Phantom Elite VM
Series LED tape lighting strips operate with 24VDC power supplies and
can be dimmed to meet any desired level with a standard low voltage
dimmer. Heat production is minimal, rated at less than 1.5 watts per
foot. Strips are precut to any desired length for mounting vertically on
either side of cabinet sections.
THE PHANTOM ELITE VM SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood or glass
shelves
—
67 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
NOTE: See also Elite Ultra for high intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VM
VERSION
ELITE
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
E4
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
TL
TOP LEFT
TR
TOP RIGHT
BL
BOTTOM LEFT
BR BOTTOM RIGHT
(WHEN FACING APPLICATION)
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
VM
ELITE
2700K
33”
E4
MD20
BL
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
VM ELITE SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
5/8”
3/4”
60º
3/4”
40º
5/8”
150º
TRIM 3
3/8”
1/2”
1/4”
TRIM E4
1”
3/4”
145º
70º
90º
5/16”
3/4”
”
5/16”
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 1.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
Concealed Wiring
For fixed shelving, furniture or retrofit
applications it may be necessary to conceal
wiring from individual fixtures back to the
transformer. We are happy to manufacture
your lighting strips with long leads to
accommodate any application.
Dual Fixtures
The Phantom fixture can be attached behind
both vertical stiles, sending light in each
direction.
SHELF
SHELF
MIN.
MIN.
Center Mount
The Phantom fixture can be attached to the
center vertical stile or door trim, using trim E4
sending light in both directions.
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations)
SHELF
Space Requirement
On a cabinet with adjustable shelves, 1” clearance is required between the back surface
of the stile and the front of the shelf. This
provides the space to move shelves without
modifying the Phantom fixture.
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
SHELF
MIN.
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DRIVERS
LED MAGNETIC DC DRIVERS
LOW VOLTAGE STRIP
PRODUCT ID
MAX LOAD
OUTPUT
VOLTAGE
LENGTH / WIDTH / DEPTH
MD20
MD40
MD60
MD96
MD150
20W
40W
60W
96W
150W
24V
24V
24V
24V
24V
5.5” / 2.25” / 2”
5.5” / 2.25” / 2”
6.5” / 2.75” / 2.25”
6.5” / 2.75” / 2.25”
9.5” / 3.25” / 3”
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
US
6.5”
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
5.5”
73355
3.25”
greenlighting
2.75”
2.25”
TECHNOLOGY
2”
2.25”
3”
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total
amperage. (watts / voltage = amperage). Refer to the table
to calculate wire size and fusing requirements.
COMPATIBLE DIMMERS
Examples of compatible dimmers for use with Phantom Drivers
LUTRON
Adriadni
Vareo
Nova
Ceana
Diva
Glyder
Lyneo
Nova T
Skylark
LEVITON
AYLV-600 Series
VET Series
NTLV Series
CNLV-600 Series
DVLV Series
GLV-600 Series
LXLV-600PL Series
NTLV Series
SLV-600 Series
Illumatech
Mural
SureSlide
Toggle Touch
Vizia
LUTRON HOMEWORKS RF MAESTRO
LUTRON RADIORA2
HRD-6ND-XX Incandescent/MLV Neutral Wire Dimmer
HRD-10ND
RRD 10 ND
RRD 6 ND
TM
IPM Series
MDMO Series
6613-PL Series
TGM10 Series
VPM06
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ELITE & ULTRA MAXIMUM RUN CAPABILITIES
There is a limit of how many Elite and Ultra Lighting Strips can be connected in tandem. The maximum run length for Elite is 30’ and Ultra
is 15’ whether it is a continuous strip or jumped together. This is an important factor when determining what lengths should be ordered.
Please see diagrams below for more information.
MAXIMUM RUN WIRING DIAGRAMS
NOTE: DRAWINGS NOT TO SCALE
ELITE 12" MODULE STRIP
12”
3/8”
NOTE: CUT MARKS @ 4" ON CENTER
ELITE WIRING DIAGRAM
30’
D
NOTE: MAXIUM RUN ON A CONTINUOUS FEED = 30’
ELITE ULTRA 12" MODULE STRIP
12”
3/8”
NOTE: CUT MARKS @ 4" ON CENTER
ELITE ULTRA WIRING DIAGRAM
D
15’
NOTE: MAXIUM RUN ON A CONTINUOUS
FEED = 15’
’
EXAMPLE: 30 X 1.5 WATTS/FT = 45 WATTS
15 X 4.5 WATTS/FT = 67 WATTS
STAY BELOW MAX TO PREVENT
NUISANCE TRIPPING
TERMS AND CONDITIONS
To comply with Phantom Lighting System warranty policies and ETL Standards, all lighting strips must be used in conjunction with
Phantom lighting drivers. All Phantom lighting transformers are ETL Approved for Class 1 applications and are strongly recommended
for proper operation of lighting strips. Phantom drivers should not be located in areas with no ventilation or subject to high ambient
temperatures. If ambient temperatures exceed 115°F (46°C) around the driver the circuit breakers may nuisance-trip due to excessive
heat. CAUTION: FAILURE TO CORRECTLY SIZE PRIMARY AND SECONDARY CONDUCTORS AND OR OVERLOAD PROTECTION MAY
RESULT IN BODILY INJURY OR SERIOUS PROPERTY DAMAGE.
If you have any questions or concerns regarding your application, please contact the factory, a licensed electrician or consult the National
Electric Code.
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TRIM SWATCHES
LIGHTING
STRIPS
LOW VOLTAGE STRIP
COLOR TEMPERATURE & TRIM FINISHES
Color Temperature Comparison
2700K
—
Ultra warm
—
Color comparison closest to an incandescent lamp
—
2700K is mainly used in traditional atmospheres
—
Warm
—
Color comparison closest to a halogen lamp
—
3000K works well for task lighting and more contemporary
settings
—
Daylight
—
Color comparison closest to a fluorescent lamp
—
4000K is best for contemporary and commercial
applications
INCANDESCENT LIGHT
3000K
2700K
4000K
HALOGEN LIGHT
3000K
NOTE: All LED color temperatures are dimmable without
color variations.
FLUORESENT LIGHT
4000K
TRIM FINISHES
WOOD VENEER*
*NOTE: FOR TRIM E3 ONLY
TRIM PROFILES
TRIM E1
TRIM E2
TRIM E4
TRIM E3
TRIM E5
1”
145º
150º
1/4”
60º
3/4”
”
40º
5/8”
1/2”
40º
90º
3/8”
”
5/16”
5/8”
”
TM
3/4”
”
5/16”
1
1/4”
5/16”
3/4”
5/16” 1/4”
1
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
2012 Phantom Lighting Systems
© Copyright 2013
ORDERING INFORMATION
DATE
P.O.#
JOB NAME
SHIP TO:
BILL TO:
COMPANY NAME
COMPANY NAME
ATTENTION
ATTENTION
ADDRESS
ADDRESS
CITY/STATE/ZIP
CITY/STATE/ZIP
PHONE
PHONE
AGENT
SPECIFIED BY
SHIPPING METHOD
GROUND
2ND DAY
OVERNIGHT
OTHER
SPECIAL INSTRUCTIONS
LIGHTING STRIPS ORDER FORM
QTY.
SERIES
VERSION
COLOR TEMP
LENGTH
DRIVERS*
QTY.
PART
NUMBER
PROFILE
CONNECTOR
FINISH
BUSS BARS*
CONNECTOR KITS*
(FOR AC SERIES ONLY)
(FOR AC & AE SERIES ONLY)
QTY.
VOLTAGE
DRIVER
OVERALL
LENGTH
HOLE
SPACING
QTY.
PART
NUMBER
*INCLUDE ADDITIONAL
NOTES ON BACK
E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.
ORDERING EXAMPLE ON PAGE 2 OF THIS FORM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DATE
P.O.#
JOB NAME
ORDER FORM EXAMPLE
QTY.
SERIES
VERSION
AC
AE
CM
HM
TL
VM
ELITE
ULTRA
COLOR TEMP
LENGTH
PROFILE
2700K
3000K
4000K
(INCHES)
E1
E2
E3
E4
E5
3
DRIVER
MD20
MD40
MD60
MD96
MD150
CONNECTOR
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
CDA KIT
EXA KIT
LE
RE
TL
TR
BL
BR
END FEED (LEFT)
END FEED (RIGHT)
TOP LEFT
TOP RIGHT
BOTTOM LEFT
BOTTOM RIGHT
(WHEN FACING APPLICATION)
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
AC
ELITE
2700K
DRIVERS*
33”
E3
MD40
CDA
P
BUSS BARS*
CONNECTOR KITS*
(FOR AC SERIES ONLY)
(FOR AC & AE SERIES ONLY)
QTY.
PART
NUMBER
VOLTAGE
QTY.
OVERALL
LENGTH
SPACING
QTY.
PART
NUMBER
1
MD40
40 WATT
2
60”
32MM ON CENTER
4
(1 PER
STRIP)
CDA KIT
(FOR AC
SERIES)
NOTES
TRANSMITTING ELECTRONIC FILES:
SAVE A COPY TO YOUR DESKTOP AND E-MAIL WITH ATTACHMENTS
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TABLE OF
CONTENTS
ULTRA AC SERIES
ADJUSTABLE
CONCEALED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
The Phantom ELITE ULTRA AC Series of LED Strip Lighting for Shelf and
Cabinet Lighting Applications represents a revolution in strip lighting
technology. These low profile cabinet lights are easily concealed
regardless of the shelf design, giving new definition to the phrase,
“See the Light, Not the Fixture.” Custom mounting trims establish the
optimum aiming angle which allows the contents of any cabinet to be
illuminated to a precise degree at the highest level of aesthetics yet
to be seen. The Phantom ELITE ULTRA Strips are constructed using
the highest quality LED’s in the industry. They are the brightest LED
tape lights on the market, emitting 240 lumens per foot. Strips are
precut to any desired length to be custom fitted to movable shelves.
There are no visible wires and shelf positions can be changed without
any rewiring whatsoever. Strips are dimmable using a standard low
voltage dimmer and produce a quality of consistent color unmatched
by competing products. Customers may choose from 2700K, 3000K,
and 4000K color temperature options. All Phantom ELITE ULTRA LED
Strips operate on 24VDC Magnetic Power Supplies.
THE PHANTOM ELITE ULTRA AC SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display cabinets
—
Exclusive current carrying system using concealed metal Buss Bars
and shelf support brackets
—
2700K, 3000K and 4000K Color Temperatures
—
Compact Mounting Trims or Extrusion to optimize Aiming Angle and
concealment
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
—
Ultra Bright, 240 Lumens/ft.
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
LENGTH
PROFILE
DRIVER
AC
ULTRA
2700K
3000K
4000K
(INCHES)
E1
E2
E3
3
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
CONNECTOR
AC
ULTRA
2700K
33”
E2
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
CDA KIT
AC SERIES
63-64
AE SERIES
65-66
CM SERIES
67-68
HM SERIES
69-70
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MD20
CDA KIT
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA AE SERIES
ADJUSTABLE
EXPOSED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
The Phantom ELITE ULTRA AE Series of LED Strip Lighting for Shelf and
Cabinet Lighting Applications represents a revolution in strip lighting
technology. These low profile cabinet lights are easily concealed
regardless of the shelf design, giving new definition to the phrase,
“See the Light, Not the Fixture.” Custom mounting trims establish the
optimum aiming angle which allows the contents of any cabinet to be
illuminated to a precise degree at the highest level of aesthetics yet to
be seen. The Phantom ELITE ULTRA Strips are constructed using the
highest quality LED’s in the industry. They are the brightest LED tape
lights on the market, emitting 240 lumens per foot. Strips are precut
to any desired length to be custom fitted to movable shelves. There
are no visible wires and shelf positions can be changed without any
rewiring whatsoever. Strips are dimmable using a standard low voltage
dimmer and produce a quality of consistent color unmatched by
competing products. Customers may choose from 2700K, 3000K, and
4000K color temperature options. All Phantom ELITE ULTRA LED Strips
operate on 24VDC Magnetic Power Supplies.
THE PHANTOM ELITE ULTRA AE SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display cabinets
—
Exclusive current carrying system using standard exposed metal
shelf support strips and shelf support clips
—
2700K, 3000K and 4000K Color Temperatures
—
Compact Mounting Extrusion, 5/8”H x 1”W, for 45º Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
—
Ultra Bright, 240 Lumens/ft.
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
AE
ULTRA
2700K
3000K
4000K
AC
ULTRA
2700K
LENGTH
DRIVER
PROFILE
(INCHES)
E1
E2
E3
3
33”
E2
CONNECTOR
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
EDA KIT
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MD20
EDA KIT
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA CM SERIES
COVE
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE ULTRA CM Series LED Strip Lighting for Cove Lighting
Applications represents a revolution in strip lighting technology.
These low profile Cove lights measure as small as 3/4”W x 1/4”H,
giving new definition to the phrase, “See the Light, Not the Fixture!”
Custom mounting trims establish precise aiming angles to allow flat,
sloped or tray ceilings to be illuminated to a precise degree at the
highest level of aesthetics yet to be seen. The Phantom ELITE ULTRA
is constructed using the highest quality LED’s in the industry. They are
the brightest strip lights on the market, emitting 240 lumens per foot.
Strips are precut in any desired length be custom fitted to any cove
dimensions. Strips are completely dimmable and produce a quality of
consistent color unmatched by competing products. Choices include
2700K, 3000K, and 4000K color temperature options. All Phantom
Elite Series LED Strips operate on 24V magnetic power supplies.
THE PHANTOM ELITE ULTRA SERIES COVE LIGHTS FEATURE
—
2700K, 3000K and 4000K Color Temperatures
—
Precut to length of each straight run, up to 15ft. per Driver Feed
—
Tight spacing for homogeneous light (LED’s 0.67” on centers)
—
240 lumens per foot
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
CM
ULTRA
2700K
3000K
4000K
CM
ULTRA
2700K
LENGTH
DRIVER
CONNECTOR
FINISH
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
LE
END FEED (LEFT)
RE
END FEED (RIGHT)
(WHEN FACING APPLICATION)
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
MD20
LE
PROFILE
(INCHES)
E1
E2
E4
E5
33”
E4
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA HM SERIES
HORIZONTAL
MOUNT
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE ULTRA HM Series for Horizontal Shelf Lighting
provides the highest quality in bright, completely concealed shelf lighting.
Unlike other LED ribbon lights whose luminance is impossible to direct,
these LED strip lights are mounted on compact trims that establish
the precise aiming angle for optimum shelf lighting applications. This
gives new meaning to our slogan See the Light, Not the Fixture!
Representing a lower cost alternative to traditional linear lighting strips,
the Phantom ELITE ULTRA HM Series LED operates at 240 lumens per
foot. Color temperatures include the warm 2700K, the 3000K which
closely mimics halogen, and the crisp white 4000K for custom and
contemporary lighting applications. Phantom ELITE ULTRA HM Series
LED strips operate with 24VDC power supplies and can be dimmed
to meet any desired level with a standard low voltage dimmer. Heat
production is minimal, rated at less than 4.5 watts per foot. Strips are
precut to any desired length and can operate up to 15 linear ft. on one
continuous section.
THE PHANTOM ELITE ULTRA HM SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood shelves
—
240 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
HM
ULTRA
2700K
3000K
4000K
HM
ULTRA
2700K
LENGTH
DRIVER
CONNECTOR
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
LE
END FEED (LEFT)
RE
END FEED (RIGHT)
(WHEN FACING APPLICATION)
MD20
LE
PROFILE
(INCHES)
E1
E2
E3
3
33”
E3
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA TL SERIES
TASK
LIGHTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE ULTRA TL series strip lights for task lighting
represent a new era in both utility and aesthetic excellence. With light
output of 240 lumens per foot, these LED lighting strips are the most
powerful low profile LED task lights on the market. The latest advances
in LED technology also allow for minimal heat output, which allows
users to leave them on for extended periods of time without risk of
overheating work areas. TL series strip lights are also dimmable,
operating on 24VDC magnetic power supplies. Two trim options allow
for precise aiming angles for work areas in kitchens, utility rooms, and
commercial work stations. Color temperature options range from the
warm 2700K often used in kitchen task lighting, the halogen equivalent
3000K, often preferred for exceptional color rendition, and the crisp
white 4000K for specialty task lighting in custom, contemporary work
areas. Phantom Elite ULTRA TL series strip lights use only the highest
quality LED’s that are configured and tested to produce consistent
color binning through the entire linear lighting array.
THE PHANTOM ELITE ULTRA TL SERIES FEATURES
—
2700K, 3000K and 4000K Color Temperatures
—
Precut to any desired length, mounted on metal trims
—
Tight spacing for homogeneous light (LED’s 0.67” on centers)
—
240 lumens per foot
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
LENGTH
PROFILE
DRIVER
TL
ULTRA
2700K
3000K
4000K
(INCHES)
E1
E2
E3
3
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
TL
ULTRA
2700K
33”
E1
CONNECTOR
LE
RE
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
END FEED (LEFT)
END FEED (RIGHT)
(WHEN FACING APPLICATION)
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
TL SERIES
71-72
VM SERIES
73-74
*NOTE: FOR TRIM E3 ONLY
4
MD20
RE
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA VM SERIES
VERTICAL
MOUNT
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE ULTRA VM Series for Vertical Cabinet Lighting
Applications provides the highest quality in bright, completely concealed
cabinet lighting. Unlike other LED tape lights whose luminance is
impossible to direct, these LED strip lights are mounted on compact
metal trims that establish the precise aiming angle for optimum cabinet
lighting applications. This gives new meaning to our slogan See
the Light, Not the Fixture! Representing a lower cost alternative to
traditional linear lighting strips, the Phantom ELITE ULTRA VM Series
LED operates at 240 lumens per foot. Color temperatures include
the warm 2700K, the 3000K which closely mimics halogen, and the
crisp white 4000K for custom and contemporary lighting applications.
Phantom ELITE ULTRA VM Series LED lighting strips operate with
24VDC power supplies and can be dimmed to meet any desired level
with a standard low voltage dimmer. Heat production is minimal, rated
at less than 4.5 watts per foot. Strips are precut to any desired length
for mounting vertically on either side of cabinet sections.
THE PHANTOM ELITE VM SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood or glass
shelves
—
240 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VERSION
COLOR TEMP
VM
ULTRA
2700K
3000K
4000K
VM
ULTRA
2700K
LENGTH
DRIVER
CONNECTOR
MD20 20 WATT
MD40 40 WATT
MD60 60 WATT
MD96 96 WATT
MD150 150 WATT
TL
TOP LEFT
TR
TOP RIGHT
BL
BOTTOM LEFT
BR BOTTOM RIGHT
(WHEN FACING APPLICATION)
MD20
BL
PROFILE
(INCHES)
E1
E2
E3
E4
3
33”
E4
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DRIVERS
LED MAGNETIC DC DRIVERS
LOW VOLTAGE STRIP
PRODUCT ID
OUTPUT
VOLTAGE
MAX LOAD
MD20
MD40
MD60
MD96
MD150
20W
40W
60W
96W
150W
LENGTH / WIDTH / DEPTH
24V
24V
24V
24V
24V
5.5” / 2.25” / 2”
5.5” / 2.25” / 2”
6.5” / 2.75” / 2.25”
6.5” / 2.75” / 2.25”
9.5” / 3.25” / 3”
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
DRIVERS75-76
9.5”
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
6.5”
5.5”
73355
greenlighting
3.25”
2.75”
2.25”
TECHNOLOGY
2”
2.25”
3”
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total
amperage. (watts / voltage = amperage). Refer to the table
to calculate wire size and fusing requirements.
COMPATIBLE DIMMERS
Examples of compatible dimmers for use with Phantom Drivers
LUTRON
LEVITON
Adriadni
Vareo
Nova
Ceana
Diva
Glyder
Lyneo
Nova T
Skylark
AYLV-600 Series
VET Series
NTLV Series
CNLV-600 Series
DVLV Series
GLV-600 Series
LXLV-600PL Series
NTLV Series
SLV-600 Series
Illumatech
Mural
SureSlide
Toggle Touch
Vizia
IPM Series
MDMO Series
6613-PL Series
TGM10 Series
VPM06
LUTRON HOMEWORKS RF MAESTRO
LUTRON RADIORA2
HRD-6ND-XX Incandescent/MLV Neutral Wire Dimmer
HRD-10ND
RRD 10 ND
RRD 6 ND
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
SEE THE LIGHT
TRIM SWATCHES
NOT THE FIXTURE
LIGHTING
STRIPS
LOW VOLTAGE STRIP
COLOR TEMPERATURE & TRIM FINISHES
Color Temperature Comparison
2700K
Ultra warm
—
Color comparison closest to an incandescent lamp
—
2700K is mainly used in traditional atmospheres
—
INCANDESCENT LIGHT
2700K
2700K
HALOGEN LIGHT
—
Color comparison closest to a halogen lamp
—
3000K works well for task lighting and more contemporary
settings
—
Color comparison closest to a fluorescent lamp
—
4000K is best for contemporary and commercial
applications
3000K
SWATCHES77
4000K
Daylight
—
3000K
HALOGEN LIGHT
3000K
Warm
—
INCANDESCENT LIGHT
NOTE: All LED color temperatures are dimmable without
color variations.
FLUORESENT LIGHT
4000K
FLUORESENT LIGHT
TRIM FINISHES
4000K
WOOD VENEER*
RACEWAY
*NOTE: FORRETRO
TRIMFITE3 ONLY
FOR WIRES
TRIM E2
RACEWAY
FOR WIRES
RACEWAY
FOR WIRES
TRIM E4
TRIM E3
CUSTOM FIT
REVEALED - WOOD VENEER OPTION
RACEWAY
TRIM PROFILES
TRIM E1
FOR WIRES
TRIM E5
1”
145º
150º
5/8”
1”
MIN.
1/2”
1/4”
60º
3/4”
40º
SHELF
SHELF
40º
SHELF
MIN.
SHELF
90º
3/8”
5/16”
5/8”
3/4”
5/16”
1/4” 5/16”
3/4”
5/16” 1/4”
MIN.
MIN.
SHELF
BEAM
MIN.
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
TM
www.phantomlighting.com
2012 Phantom Lighting Systems
© Copyright 2013
RETRO FIT
REVEALED - WOOD VENEER OPTION
ORDERING INFORMATION
DATE
P.O.#
JOB NAME
SHIP TO:
BILL TO:
COMPANY NAME
COMPANY NAME
ATTENTION
ATTENTION
ADDRESS
ADDRESS
CITY/STATE/ZIP
CITY/STATE/ZIP
PHONE
PHONE
AGENT
SPECIFIED BY
SHIPPING METHOD
£
GROUND
£
2ND DAY
£
OVERNIGHT
£
OTHER
SPECIAL INSTRUCTIONS
LIGHTING STRIPS ORDER FORM
QTY.
SERIES
VERSION
COLOR TEMP
LENGTH
DRIVERS*
PROFILE
DRIVER
CONNECTOR
BUSS BARS*
PART
NUMBER
QTY.
VOLTAGE
FINISH
CONNECTOR KITS*
(FOR AC SERIES ONLY)
QTY.
OVERALL
LENGTH
(FOR AC & AE SERIES ONLY)
HOLE
SPACING
QTY.
ORDER FORM
78-79
PART
NUMBER
*INCLUDE ADDITIONAL
NOTES ON BACK
E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.
ORDERING EXAMPLE ON PAGE 2 OF THIS FORM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
OUR OTHER PRODUCTS
SEE THE LIGHT
NOT THE FIXTURE
TM
SEE THE LIGHT
NOT THE FIXTURE
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA AC SERIES
ADJUSTABLE
CONCEALED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
The Phantom ELITE ULTRA AC Series of LED Strip Lighting for Shelf and
Cabinet Lighting Applications represents a revolution in strip lighting
technology. These low profile cabinet lights are easily concealed
regardless of the shelf design, giving new definition to the phrase,
“See the Light, Not the Fixture.” Custom mounting trims establish the
optimum aiming angle which allows the contents of any cabinet to be
illuminated to a precise degree at the highest level of aesthetics yet
to be seen. The Phantom ELITE ULTRA Strips are constructed using
the highest quality LED’s in the industry. They are the brightest LED
tape lights on the market, emitting 240 lumens per foot. Strips are
precut to any desired length to be custom fitted to movable shelves.
There are no visible wires and shelf positions can be changed without
any rewiring whatsoever. Strips are dimmable using a standard low
voltage dimmer and produce a quality of consistent color unmatched
by competing products. Customers may choose from 2700K, 3000K,
and 4000K color temperature options. All Phantom ELITE ULTRA LED
Strips operate on 24VDC Magnetic Power Supplies.
THE PHANTOM ELITE ULTRA AC SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display cabinets
—
Exclusive current carrying system using concealed metal Buss Bars
and shelf support brackets
—
2700K, 3000K and 4000K Color Temperatures
—
Compact Mounting Trims or Extrusion to optimize Aiming Angle and
concealment
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
—
Ultra Bright, 240 Lumens/ft.
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
AC
VERSION
ULTRA
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
CDA KIT
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
AC
ULTRA
2700K
33”
E2
MD20
CDA KIT
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AC ELITE ULTRA SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
TRIM 3
5/8”
1”
3/4”
3/4”
60º
3/8”
1/2”
1/4”
5/8”
150º
3/4”
145º
70º
90º
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 4.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
RACEWAY
Space Requirement
For best results, a wood
reveal should be used
to conceal the fixture.
For applications above
eye level use and extend
wood trim as necessary.
Allow 1” clearance between light fixture and
holes.
Brass Contact Pads
Brass contact pads are
designed to transfer electricity
5/8” from the shelf support clip to
5/8”
the individual fixtures utilizing
a safe low voltage current. Contact is made
when the shelf is installed. No tools are
required to rearrange the shelves!
FOR WIRES
7/8”
SHELF
MIN.
Brass Support Clips
3/4” Brass support clips are
designed to transfer electricity
from the concealed buss
bar to the brass contact pad
mounted on the bottom of the
7/8”
3/4”
shelves utilizing a safe low
voltage current. Standard right angle pins
should be used to support the back of each
shelf and are not included in the kit.
Lighting Strip
Each lighting strip contains leds spaced at
0.67 inch on center. For best results, always
use a matte finish on the back of the cabinet
to minimize reflections or glare.
Buss Bar Supports (5/8” W X 1/4” D)
Heavy duty steel buss bars are concealed
during construction and engineered to
perfectly align with 8 x 32 threaded holes
drilled 32 mm on center. This system
totally hides all the wiring and allows you
to use the drilled pin method of shelf
support. Consult the factory for other
spacing options.
Lug Connector
Heavy duty lug connectors are used to
connect the wire to the metal buss bars back
to the power supply. These connections
should remain accessible for service and
maintenance.
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations).
Back Clip Shelf Support
(by others)
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA AE SERIES
ADJUSTABLE
EXPOSED
LOW VOLTAGE STRIP FOR ADJUSTABLE SHELVES
PHANTOM LIGHTING
The Phantom ELITE ULTRA AE Series of LED Strip Lighting for Shelf and
Cabinet Lighting Applications represents a revolution in strip lighting
technology. These low profile cabinet lights are easily concealed
regardless of the shelf design, giving new definition to the phrase,
“See the Light, Not the Fixture.” Custom mounting trims establish the
optimum aiming angle which allows the contents of any cabinet to be
illuminated to a precise degree at the highest level of aesthetics yet to
be seen. The Phantom ELITE ULTRA Strips are constructed using the
highest quality LED’s in the industry. They are the brightest LED tape
lights on the market, emitting 240 lumens per foot. Strips are precut
to any desired length to be custom fitted to movable shelves. There
are no visible wires and shelf positions can be changed without any
rewiring whatsoever. Strips are dimmable using a standard low voltage
dimmer and produce a quality of consistent color unmatched by
competing products. Customers may choose from 2700K, 3000K, and
4000K color temperature options. All Phantom ELITE ULTRA LED Strips
operate on 24VDC Magnetic Power Supplies.
THE PHANTOM ELITE ULTRA AE SERIES FEATURES
—
Low profile, concealed linear lighting source designed for adjustable
shelf lighting or adjustable display cabinets
—
Exclusive current carrying system using standard exposed metal
shelf support strips and shelf support clips
—
2700K, 3000K and 4000K Color Temperatures
—
Compact Mounting Extrusion, 5/8”H x 1”W, for 45º Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
—
Ultra Bright, 240 Lumens/ft.
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
AE
VERSION
ULTRA
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
EDA KIT
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
AC
ULTRA
2700K
33”
E2
MD20
EDA KIT
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
AE ELITE ULTRA SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
TRIM 3
5/8”
1”
3/4”
3/4”
60º
3/8”
1/2”
1/4”
5/8”
150º
3/4”
145º
70º
90º
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 4.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
RACEWAY
Exposed Steel Shelf
Supports (by others)
You can easily energize new
or existing steel supports to
conduct safe low voltage
3/4”
current for our exposed wiring
method. This system virtually eliminates
all the visible wiring and allows you to use
standard shelf support clips. The use of
aluminum shelf supports is not recommended!
Space Requirement
For best results, a wood
reveal should be used
to conceal the fixture.
For applications above
eye level use and extend
wood trim as necessary.
Allow 1” clearance between light fixture and
holes.
3/4”
FOR WIRES
7/8”
SHELF
MIN.
Brass Contact Pads
Brass contact pads are
designed to transfer electricity
from the shelf support clip to
5/8” the individual fixtures utilizing
5/8”
a safe low voltage current.
Contact is made when the shelf is installed. No
tools are required to rearrange the shelves!
Lighting Strip
Each lighting strip contains leds spaced at
0.67 inch on center. For best results, always
use a matte finish on the back of the cabinet
to minimize reflections or glare.
Dimmer Controls (by others)
Magnetic low voltage drivers should always be
used with a dimmer designated for magnetic
or inductive loads.
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations).
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA CM SERIES
COVE
MOUNTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE ULTRA CM Series LED Strip Lighting for Cove Lighting
Applications represents a revolution in strip lighting technology.
These low profile Cove lights measure as small as 3/4”W x 1/4”H,
giving new definition to the phrase, “See the Light, Not the Fixture!”
Custom mounting trims establish precise aiming angles to allow flat,
sloped or tray ceilings to be illuminated to a precise degree at the
highest level of aesthetics yet to be seen. The Phantom ELITE ULTRA
is constructed using the highest quality LED’s in the industry. They are
the brightest strip lights on the market, emitting 240 lumens per foot.
Strips are precut in any desired length be custom fitted to any cove
dimensions. Strips are completely dimmable and produce a quality of
consistent color unmatched by competing products. Choices include
2700K, 3000K, and 4000K color temperature options. All Phantom
Elite Series LED Strips operate on 24V magnetic power supplies.
THE PHANTOM ELITE ULTRA SERIES COVE LIGHTS FEATURE
—
2700K, 3000K and 4000K Color Temperatures
—
Precut to length of each straight run, up to 15ft. per Driver Feed
—
Tight spacing for homogeneous light (LED’s 0.67” on centers)
—
240 lumens per foot
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
CM
VERSION
ULTRA
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E4
E5
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
LE
END FEED (LEFT)
RE END FEED (RIGHT)
(WHEN FACING APPLICATION)
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
CM
ULTRA
2700K
33”
E4
MD20
LE
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
CM ELITE ULTRA SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E4
145º
150º
TRIM E5
40º
40º
1/2”
1/4”
60º
3/4”
”
3/8”
”
5/16”
5/8””
3/4”
”
5/16”
3/4”
1
1/4”
5/16”
5/16” 1/4”
1
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 4.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations).
G
ILIN
CE
Dimmer Controls (by others)
Magnetic low voltage drivers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
drivers should always be used with a dimmer
designated for electronic loads.
1/2” MIN.
WALL
1 1/2” MIN.
1 1/2”
MIN.
CEILING
1 1/2” MIN.
WALL
1 1/2” MIN.
1”
1”
1 1/2”
MIN.
Beam/Truss Application
Phantom lighting strips may be installed in
exposed beams or trusses by using Trim #5
for indirect lighting applications. Wood strips
can be added between trusses to support the
lighting strips or they may be routed directly
into the tops of beams.
Space Requirements
To achieve continuous illumination CM Series
strips require a 2” minimum clearance from
the strip to any adjacent surface. Increase
clearance to 5” for delicate materials.
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA HM SERIES
HORIZONTAL
MOUNT
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE ULTRA HM Series for Horizontal Shelf Lighting
provides the highest quality in bright, completely concealed shelf lighting.
Unlike other LED ribbon lights whose luminance is impossible to direct,
these LED strip lights are mounted on compact trims that establish
the precise aiming angle for optimum shelf lighting applications. This
gives new meaning to our slogan See the Light, Not the Fixture!
Representing a lower cost alternative to traditional linear lighting strips,
the Phantom ELITE ULTRA HM Series LED operates at 240 lumens per
foot. Color temperatures include the warm 2700K, the 3000K which
closely mimics halogen, and the crisp white 4000K for custom and
contemporary lighting applications. Phantom ELITE ULTRA HM Series
LED strips operate with 24VDC power supplies and can be dimmed
to meet any desired level with a standard low voltage dimmer. Heat
production is minimal, rated at less than 4.5 watts per foot. Strips are
precut to any desired length and can operate up to 15 linear ft. on one
continuous section.
THE PHANTOM ELITE ULTRA HM SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood shelves
—
240 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
—
Wood Veneer Extrusion for mounting under shelves with no edge trim
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
HM
VERSION
ULTRA
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
FINISH
LE
END FEED (LEFT)
RE END FEED (RIGHT)
(WHEN FACING APPLICATION)
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
HM
ULTRA
2700K
33”
E3
MD20
LE
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
HM ELITE ULTRA SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
TRIM 3
5/8”
1”
3/4”
3/4”
60º
3/8”
1/2”
1/4”
5/8”
150º
3/4”
145º
70º
90º
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 4.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
Lighting Strip Location
Lighting Strip
Each lighting strip contains leds spaced at
0.67 inch on center. For best results, always
use a matte finish on the back of the cabinet
to minimize reflections or glare.
RACEWAY
FOR WIRES
Retro Fit
Concealed Wiring
For fixed shelving, furniture or retrofit
applications it may be necessary to conceal
wiring from individual fixtures back to the
transformer. We are happy to manufacture
your lighting strips with long leads to
accommodate any application.
SHELF
1 1/4”
MIN.
RACEWAY
FOR WIRES
Revealed Wood
Veneer Option
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations)
SHELF
1 1/4”
MIN.
RACEWAY
FOR WIRES
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
Custom Fit
SHELF
1 1/4”
MIN.
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA TL SERIES
TASK
LIGHTING
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE ULTRA TL series strip lights for task lighting
represent a new era in both utility and aesthetic excellence. With light
output of 240 lumens per foot, these LED lighting strips are the most
powerful low profile LED task lights on the market. The latest advances
in LED technology also allow for minimal heat output, which allows
users to leave them on for extended periods of time without risk of
overheating work areas. TL series strip lights are also dimmable,
operating on 24VDC magnetic power supplies. Two trim options allow
for precise aiming angles for work areas in kitchens, utility rooms, and
commercial work stations. Color temperature options range from the
warm 2700K often used in kitchen task lighting, the halogen equivalent
3000K, often preferred for exceptional color rendition, and the crisp
white 4000K for specialty task lighting in custom, contemporary work
areas. Phantom Elite ULTRA TL series strip lights use only the highest
quality LED’s that are configured and tested to produce consistent
color binning through the entire linear lighting array.
THE PHANTOM ELITE ULTRA TL SERIES FEATURES
—
2700K, 3000K and 4000K Color Temperatures
—
Precut to any desired length, mounted on metal trims
—
Tight spacing for homogeneous light (LED’s 0.67” on centers)
—
240 lumens per foot
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
TL
VERSION
ULTRA
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
LE
RE
END FEED (LEFT)
END FEED (RIGHT)
(WHEN FACING APPLICATION)
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
TL
ULTRA
2700K
33”
E1
MD20
RE
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TL ELITE ULTRA SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
TRIM 3
5/8”
1”
3/4”
3/4”
60º
3/8”
1/2”
1/4”
5/8”
150º
3/4”
145º
70º
90º
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 4.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
Wire Sleeve Tip
We recommend that you fabricate a small
removable wood cover for the purpose of
hiding the wires between the fixture and where
the wire exits the wall. Most applications
require an end feed connection.
1/4" MIN.
Lighting Strip Location
For best results, always mount the lights
behind the front lip of the upper cabinet and
use a matte finish on the back of the cabinet
or wall to minimize glare and reflections. Note:
Stone finishes such as granite, marble and
ceramic tile are notorious for reflecting lamp
images from normal viewing angles.
Driver (Remote Mount)
Magnetic transformers are sized to match the
total wattage of your lighting load and come
equipped with one or more secondary circuit
breakers. (See transformer sheet for more
sizing information and amperage calculations)
Dimmer Controls (by others)
Magnetic low voltage drivers should always be
used with a dimmer designated for magnetic
or inductive loads.
Lighting Strip Tip
It may be necessary to field adjust lighting
strips up or down to accommodate larger
wood reveals and fine tune lighting coverage.
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ULTRA VM SERIES
VERTICAL
MOUNT
LOW VOLTAGE STRIP
PHANTOM LIGHTING
The Phantom ELITE ULTRA VM Series for Vertical Cabinet Lighting
Applications provides the highest quality in bright, completely concealed
cabinet lighting. Unlike other LED tape lights whose luminance is
impossible to direct, these LED strip lights are mounted on compact
metal trims that establish the precise aiming angle for optimum cabinet
lighting applications. This gives new meaning to our slogan See
the Light, Not the Fixture! Representing a lower cost alternative to
traditional linear lighting strips, the Phantom ELITE ULTRA VM Series
LED operates at 240 lumens per foot. Color temperatures include
the warm 2700K, the 3000K which closely mimics halogen, and the
crisp white 4000K for custom and contemporary lighting applications.
Phantom ELITE ULTRA VM Series LED lighting strips operate with
24VDC power supplies and can be dimmed to meet any desired level
with a standard low voltage dimmer. Heat production is minimal, rated
at less than 4.5 watts per foot. Strips are precut to any desired length
for mounting vertically on either side of cabinet sections.
THE PHANTOM ELITE VM SERIES FEATURES
—
Designed for lighting display cabinets with fixed wood or glass
shelves
—
240 lumens per foot
—
2700K, 3000K and 4000K Color Temperatures
—
Mounting Trims and Extrusions for Optimum Aiming Angle
NOTE: See also Elite for standard intensity applications.
US
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
73355
greenlighting
TECHNOLOGY
ORDERING INFORMATION
ORDERING EXAMPLE:
QTY.
SERIES
VM
VERSION
ULTRA
COLOR TEMP
2700K
3000K
4000K
LENGTH
PROFILE
(INCHES)
E1
E2
E3
E4
3
DRIVER
MD20
MD40
MD60
MD96
MD150
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
CONNECTOR
TL
TOP LEFT
TR
TOP RIGHT
BL
BOTTOM LEFT
BR BOTTOM RIGHT
(WHEN FACING APPLICATION)
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
VM
ULTRA
2700K
33”
E4
MD20
BL
MB
EASY-TO-USE, DOWNLOADABLE ORDER FORMS WITH ACTIVE FORM FIELDS AT PHANTOMLIGHTING.COM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
VM ELITE ULTRA SERIES TRIM PROFILES
TRIM E1
TRIM E2
TRIM E3
5/8”
3/4”
60º
3/4”
40º
5/8”
150º
TRIM 3
3/8”
1/2”
1/4”
TRIM E4
1”
3/4”
145º
70º
90º
5/16”
3/4”
”
5/16”
1/4”
1/2”
LED STRIP
The Phantom LED Strip Light is a low profile integral tape with diode spacing 0.67 inches on centers, operating at 24VDC and 4.5 watts per
foot. Available Color temperatures are 2700K (warm like household lighting), 3000K (Slightly cooler like Halogen), and 4000K (cool white).
The 2700K tone coordinates well with most residential lighting, while the 3000K tone makes colors appear more vivid for display purposes.
The crisp whiter tone of 4000K is often preferred for commercial displays of diamonds and crystal. Life expectancy of the diodes is rated
at 50,000 hours. Unlike ordinary light bulbs, these strip lights are virtually heat-free. Dimming is accomplished with an ordinary Low Voltage
dimmer, rather than specialized dimming driver.
4"
8"
CUT MARKS @ 4" O.C.
12"
ADHESIVE TAPE
EXPLODED VIEW
Concealed Wiring
For fixed shelving, furniture or retrofit
applications it may be necessary to conceal
wiring from individual fixtures back to the
transformer. We are happy to manufacture
your lighting strips with long leads to
accommodate any application.
Dual Fixtures
The Phantom fixture can be attached behind
both vertical stiles, sending light in each
direction.
SHELF
SHELF
MIN.
MIN.
Center Mount
The Phantom fixture can be attached to the
center vertical stile or door trim, using trim E4
sending light in both directions.
Drivers
Magnetic drivers are sized to match the total
wattage of your lighting load and come
equipped with one or more secondary
circuit breakers. (See driver sheet for more
sizing information and amperage calculations)
SHELF
Space Requirement
On a cabinet with adjustable shelves, 1” clearance is required between the back surface
of the stile and the front of the shelf. This
provides the space to move shelves without
modifying the Phantom fixture.
Dimmer Controls (by others)
Magnetic low voltage transformers should
always be used with a dimmer designated
for magnetic or inductive loads. Electronic
transformers should always be used with a
dimmer designated for electronic loads.
SHELF
MIN.
DRIVERS
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
6.5”
5.5”
2.75”
2.25”
2”
2.25”
3.25”
3”
To figure total requirements for drivers, calculate total watts per foot
divided by voltage equals total amperage. (watts / voltage = amperage).
Refer to the table to calculate wire size and fusing requirements or see
driver page for more specific details.
SPECIFICATIONS
20
VA
40
VA
60
VA
96
VA
150
VA
MAXIMUM WATTAGE
16
32
48
76
150
HEIGHT (H)
5.5”
5.5”
6.5”
6.5”
9.5”
WIDTH (W)
2.25”
2.25”
2.75”
2.75”
3.25”
DEPTH (D)
2”
2”
2.25”
2.25”
3”
24 VOLT (CB)
(1) 1A
(1) 2A
(1) 2.5A
(1) 4A
(1) 6.25A
WEIGHT (LBS)
1.8
1.8
2
2
5
PART #’s
MD20
MD40
MD60
MD96
MD150
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DRIVERS
LED MAGNETIC DC DRIVERS
LOW VOLTAGE STRIP
PRODUCT ID
MAX LOAD
OUTPUT
VOLTAGE
LENGTH / WIDTH / DEPTH
MD20
MD40
MD60
MD96
MD150
20W
40W
60W
96W
150W
24V
24V
24V
24V
24V
5.5” / 2.25” / 2”
5.5” / 2.25” / 2”
6.5” / 2.75” / 2.25”
6.5” / 2.75” / 2.25”
9.5” / 3.25” / 3”
MAGNETIC DRIVER
150WATT
MAGNETIC DRIVER
60WATT & 96WATT
MAGNETIC DRIVER
20WATT & 40WATT
9.5”
US
6.5”
ETL LISTED, MISCELLANEOUS FIXTURES, CONFORMS TO UL STD. 1598
5.5”
73355
3.25”
greenlighting
2.75”
2.25”
TECHNOLOGY
2”
2.25”
3”
To figure total requirements for transformers, calculate
total watts per foot divided by voltage equals total
amperage. (watts / voltage = amperage). Refer to the table
to calculate wire size and fusing requirements.
COMPATIBLE DIMMERS
Examples of compatible dimmers for use with Phantom Drivers
LUTRON
Adriadni
Vareo
Nova
Ceana
Diva
Glyder
Lyneo
Nova T
Skylark
LEVITON
AYLV-600 Series
VET Series
NTLV Series
CNLV-600 Series
DVLV Series
GLV-600 Series
LXLV-600PL Series
NTLV Series
SLV-600 Series
Illumatech
Mural
SureSlide
Toggle Touch
Vizia
LUTRON HOMEWORKS RF MAESTRO
LUTRON RADIORA2
HRD-6ND-XX Incandescent/MLV Neutral Wire Dimmer
HRD-10ND
RRD 10 ND
RRD 6 ND
TM
IPM Series
MDMO Series
6613-PL Series
TGM10 Series
VPM06
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
ELITE & ULTRA MAXIMUM RUN CAPABILITIES
There is a limit of how many Elite and Ultra Lighting Strips can be connected in tandem. The maximum run length for Elite is 30’ and Ultra
is 15’ whether it is a continuous strip or jumped together. This is an important factor when determining what lengths should be ordered.
Please see diagrams below for more information.
MAXIMUM RUN WIRING DIAGRAMS
NOTE: DRAWINGS NOT TO SCALE
ELITE 12" MODULE STRIP
12”
3/8”
NOTE: CUT MARKS @ 4" ON CENTER
ELITE WIRING DIAGRAM
30’
D
NOTE: MAXIUM RUN ON A CONTINUOUS FEED = 30’
ELITE ULTRA 12" MODULE STRIP
12”
3/8”
NOTE: CUT MARKS @ 4" ON CENTER
ELITE ULTRA WIRING DIAGRAM
D
15’
NOTE: MAXIUM RUN ON A CONTINUOUS
FEED = 15’
’
EXAMPLE: 30 X 1.5 WATTS/FT = 45 WATTS
15 X 4.5 WATTS/FT = 67 WATTS
STAY BELOW MAX TO PREVENT
NUISANCE TRIPPING
TERMS AND CONDITIONS
To comply with Phantom Lighting System warranty policies and ETL Standards, all lighting strips must be used in conjunction with
Phantom lighting drivers. All Phantom lighting transformers are ETL Approved for Class 1 applications and are strongly recommended
for proper operation of lighting strips. Phantom drivers should not be located in areas with no ventilation or subject to high ambient
temperatures. If ambient temperatures exceed 115°F (46°C) around the driver the circuit breakers may nuisance-trip due to excessive
heat. CAUTION: FAILURE TO CORRECTLY SIZE PRIMARY AND SECONDARY CONDUCTORS AND OR OVERLOAD PROTECTION MAY
RESULT IN BODILY INJURY OR SERIOUS PROPERTY DAMAGE.
If you have any questions or concerns regarding your application, please contact the factory, a licensed electrician or consult the National
Electric Code.
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
TRIM SWATCHES
LIGHTING
STRIPS
LOW VOLTAGE STRIP
COLOR TEMPERATURE & TRIM FINISHES
Color Temperature Comparison
2700K
—
Ultra warm
—
Color comparison closest to an incandescent lamp
—
2700K is mainly used in traditional atmospheres
—
Warm
—
Color comparison closest to a halogen lamp
—
3000K works well for task lighting and more contemporary
settings
—
Daylight
—
Color comparison closest to a fluorescent lamp
—
4000K is best for contemporary and commercial
applications
INCANDESCENT LIGHT
3000K
2700K
4000K
HALOGEN LIGHT
3000K
NOTE: All LED color temperatures are dimmable without
color variations.
FLUORESENT LIGHT
4000K
TRIM FINISHES
WOOD VENEER*
*NOTE: FOR TRIM E3 ONLY
TRIM PROFILES
TRIM E1
TRIM E2
TRIM E4
TRIM E3
TRIM E5
1”
145º
150º
1/4”
60º
3/4”
”
40º
5/8”
1/2”
40º
90º
3/8”
”
5/16”
5/8”
”
TM
3/4”
”
5/16”
1
1/4”
5/16”
3/4”
5/16” 1/4”
1
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
2012 Phantom Lighting Systems
© Copyright 2013
ORDERING INFORMATION
DATE
P.O.#
JOB NAME
SHIP TO:
BILL TO:
COMPANY NAME
COMPANY NAME
ATTENTION
ATTENTION
ADDRESS
ADDRESS
CITY/STATE/ZIP
CITY/STATE/ZIP
PHONE
PHONE
AGENT
SPECIFIED BY
SHIPPING METHOD
GROUND
2ND DAY
OVERNIGHT
OTHER
SPECIAL INSTRUCTIONS
LIGHTING STRIPS ORDER FORM
QTY.
SERIES
VERSION
COLOR TEMP
LENGTH
DRIVERS*
QTY.
PART
NUMBER
PROFILE
CONNECTOR
FINISH
BUSS BARS*
CONNECTOR KITS*
(FOR AC SERIES ONLY)
(FOR AC & AE SERIES ONLY)
QTY.
VOLTAGE
DRIVER
OVERALL
LENGTH
HOLE
SPACING
QTY.
PART
NUMBER
*INCLUDE ADDITIONAL
NOTES ON BACK
E-MAIL YOUR COMPLETED ORDER FORM TO SALES@PHANTOMLIGHTING.COM FOR PRICING.
ORDERING EXAMPLE ON PAGE 2 OF THIS FORM
TM
607 Durham Drive | Houston, Texas 77007-5316
Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184
www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
DATE
P.O.#
JOB NAME
ORDER FORM EXAMPLE
QTY.
SERIES
VERSION
AC
AE
CM
HM
TL
VM
ELITE
ULTRA
COLOR TEMP
LENGTH
PROFILE
2700K
3000K
4000K
(INCHES)
E1
E2
E3
E4
E5
3
DRIVER
MD20
MD40
MD60
MD96
MD150
CONNECTOR
20 WATT
40 WATT
60 WATT
96 WATT
150 WATT
FINISH
PAINTED METAL
FW FLAT WHITE
GW GLOSS WHITE
FB FLAT BLACK
GB GLOSS BLACK
LB LIGHT BEIGE
MB MEDIUM BROWN
AL ALMOND
UF UNFINISHED
CC CUSTOM COLOR
CDA KIT
EXA KIT
LE
RE
TL
TR
BL
BR
END FEED (LEFT)
END FEED (RIGHT)
TOP LEFT
TOP RIGHT
BOTTOM LEFT
BOTTOM RIGHT
(WHEN FACING APPLICATION)
WOOD VENEER*
O
OAK
M
MAHOGANY
P
PINE
W
WALNUT
*NOTE: FOR TRIM E3 ONLY
4
AC
ELITE
2700K
DRIVERS*
33”
E3
MD40
CDA
P
BUSS BARS*
CONNECTOR KITS*
(FOR AC SERIES ONLY)
(FOR AC & AE SERIES ONLY)
QTY.
PART
NUMBER
VOLTAGE
QTY.
OVERALL
LENGTH
SPACING
QTY.
PART
NUMBER
1
MD40
40 WATT
2
60”
32MM ON CENTER
4
(1 PER
STRIP)
CDA KIT
(FOR AC
SERIES)
NOTES
TRANSMITTING ELECTRONIC FILES:
SAVE A COPY TO YOUR DESKTOP AND E-MAIL WITH ATTACHMENTS
607 Durham Drive | Houston, Texas 77007-5316 | Tel: 713.863.1133 | Fax: 713.863.0044 | 800.863.1184 | www.phantomlighting.com
© Copyright 2013 Phantom Lighting Systems
607 Durham Drive
Houston, Texas 77007-5316
Phone:
713.863.1133
Fax:
713.863.0044
Toll Free: 800.863.1184
www.phantomlighting.com