C1D1 Purged Workstation
Description and Features
Class I - gas or dust
Division 1 - normal conditions
The C1D1 X-Purge workstation is designed for
areas in which flammable gases or vapors
may be present in the air in sufficient
quantities to be explosive or ignitable
Standard Enclosure
According to the NEC, there are three types
of hazardous locations. The first type of
hazard is one which is created by the
presence of flammable gases or dust in the
air, such as natural gas or gasoline vapor.
When these materials are found in the
atmosphere, a potential for explosion exists,
which could be ignited if an electrical or
other source of ignition is present. The Code
writers have referred to this first type of
hazard as Class I. Some typical Class I
locations are:
Petroleum refineries, and gasoline storage
and dispensing areas;
Dry cleaning plants where vapors from
cleaning fluids can be present;
Spray finishing areas;
Aircraft hangars and fuel servicing areas;
and
Utility gas plants, and operations involving
storage and handling of liquified petroleum
gas or natural gas.
 All of these are Class I . . . gas or dust . .
hazardous locations. All require special Class I
hazardous location equipment..
Back and Side
3605 Swiftwater Park Drive Suwanee, Ga. 30024 ● 678 590 1634 ● www.SwiftProtech.com
C1D1 Purged Workstation
Custom 32” Purged
Enclosure
Description and Features
The entire SF system has been tested by a
third party to comply with the applicable
standards.
A purged solution requires air or inert gas at
the site to pressurize the cabinet.
Purge Information
The 6000 series purge system reduces the
classification within the protected enclosure
from Zone 1 and 21 to non-hazardous area.
General purpose equipment can be operated
within the protected enclosure.
•Suitable for Class I and II, Division 1/ Zone 1
and Zone 21 to non-hazardous area
applications
•Enclosure sizes up to 250 cubic ft. (7.01
cubic meters)
•The Type X/ Ex px system conforms to ATEX,
NFPA 496 and ISA 12.4
•DEMKO, UL cULus, IEC 61508, SIL 2
Key Benefits:
 Better ROI
Lower cost of ownership
Added safety
 Available alerts & alarms
Not limited to specific components
More configuration options
Longer useful life
 More flexible maintenance options
Seamless cabinet/KB enclosure
Can be configured for C1D2 areas
Bottom Mount X Purge
3605 Swiftwater Park Drive Suwanee, Ga. 30024 ● 678 590 1634 ● www.SwiftProtech.com
C1D1 Purged Workstation
General Outline
excluding purge
X Purge Data
3605 Swiftwater Park Drive Suwanee, Ga. 30024 ● 678 590 1634 ● www.SwiftProtech.com
Uncased
Cased
•Our sealed keyboards are designed to give total reliability throughout the entire range of
industrial, commercial and military environments.
•The 128T series keyboard has been designed as a direct rugged replacement for a standard
•101/102 PC keyboard.
•Language and connection variants make this a versatile product.
•. 2 yr standard warranty, 3-5 yr warranty available
•Over 20 million operation switch cycles
•IP65 NEMA 4
•Cased and Uncased; Flush mounting available
•Touchpad, Touch mouse and trackball pointing devices
•30 and 50 mm trackballs
Stainless Steel Mouse
Keyboards
Power Consumption:
50W
Storage Temperature:
-40C to +85C
Operating Temperature:
-20C to +60C
Tracking Force
150 gms (nominal)
Operating force
150 gms (nominal)
MTBF
60,000 hours
Not all items approved for hazardous locations. Changes to listed items may change listed status
3605 Swiftwater Park Drive Suwanee, Ga. 30024 ● 678 590 1634 ● www.SwiftProtech.com
Small Ind. PCs
PC and thin client Configs
Specification
Industrial PC
Processor:
Ultra Low Voltage duo 1.6GHz ,Atom,
Dual Core, Core 2 Duo
Memory:
Built-in DDR-II 1GB high speed RAM.
(Optional : 2GB)
Hard Disk:
40-80GB HDD or 4,8,16,32GB SSD
Serial Ports:
2 or 4 X RS-232
USB Ports:
6-8 USB 2.0
Ethernet:
1 x 10/100 baseT + 1 x GIGA LAN
Thermals
Op Temp 50-60C
Graphics:
VGA or DVI port was hidden inside.
Optional IP65 VGA port/ supporting second
monitor and Dual independent display with
two different images
Environmental
Test standard
Vibration & Shock: industrial and military
standards MIL-STD-810F
EMI / EMC : MIL-STD-461E
CE, FCC, RoHS, ETL standards.
Supply Voltage:
95-265 VAC or 8 – 30VDC
Not all items approved for hazardous locations. Changes to listed items may change listed status
3605 Swiftwater Park Drive Suwanee, Ga. 30024 ● 678 590 1634 ● www.SwiftProtech.com
Thin Clients and KVMs --Copper and Fiber Optic
Parallel Port:
1 x LPT1
Touchscreen:
Resistive or Projective Capacitive
Operating
Temperature
– 32° (0°C) to 104° (40°C)
Extended
Temperature:
-25C to +55C (-40C with optional heater
kit)
Operating System:
WinXP Pro, WinXP Embedded
Expansion slot
CF Slot : support 1G, 2G, 4G, 8G, 16G
compact flash disk
Display Resolution
640 x 480 up to 1280 x 1024
Not all items approved for hazardous locations. Changes to listed items may change listed status
3605 Swiftwater Park Drive Suwanee, Ga. 30024 ● 678 590 1634 ● www.SwiftProtech.com
19” Displays
Size
19.0" diagonal
Brightness
(white) 250 nits (cd/m2) max
Touch screens
Hardened Resistive with up to 5mil film
Native Resolution
SXGA (1280 x 1024, 5:4 aspect ratio)
Operating Shock
15 g, 6 msec, half-sine
Humidity
20% to 90% non-condensing
Thermals
Op temp -20 to 50C heaters and coolers
extend operating temperature range
Mounting
Open frame, clips and posts
Not all items approved for hazardous locations. Changes to listed items may change listed status
3605 Swiftwater Park Drive Suwanee, Ga. 30024 ● 678 590 1634 ● www.SwiftProtech.com
General Specifications
Power Input
120/240 VAC, 1.5/0.75 A, 60/50 Hz
Power
Consumption
(typical) - 25 W
MTBF
>250,000 hrs
Backlight MTBF
>50,000 hrs half-life
ULCertifications
UL 60950 3rd Edition / cUL, UL 508A, UL
50E, CE
Contrast Ratio
(typical) - 1000:1
Backlight
Two CCFTs (Cold Cathode Fluorescent
Tube)
Enclosures
316l, 304L and Aluminum
Enclosure Options
External access panel, temp alarms
Disconnects. Door sensors, alarm lights
Not all items approved for hazardous locations. Changes to listed items may change listed status
3605 Swiftwater Park Drive Suwanee, Ga. 30024 ● 678 590 1634 ● www.SwiftProtech.com