Data Sheet FUJITSU Component Connector FCN-074B / 078B series (DDR4 DIMM)
FUJITSU Component Connector
FCN-074B / 078B series
Card Edge Connector for DDR4 Memory Module
RoHS compliant
Overview
This is a 288-pin DIMM socket that conforms to JEDEC standards.
Features
■■ Highly reliable contact
Contact reliability with a module substrate is improved by a Fujtisu proprietary
double-contact structure, which is resistant to dust and flux
■■ Various terminal shapes to match with substrate design and mounting form
One surface mount type, one press fit type, and three through-hole types
having different terminal lengths are included in this lineup
■■ Flame resistant UL94V-0
Flame resistant UL94V-0 LCP resin is used for the housing insulating material
■■ Typical applications
DRAM-memory module connections for HPCs (servers, supercomputers),
communication measurement apparatuses and office equipment
DDR4 DIMM socket
Item
Specification
Item
Material, surface treatment
Operating temperature range
-55°C to +85°C
Insulation material
LCP resing (UL94V-0)
Max. current rating
0.75A
Conductor
Max. voltage rating
29VAC
Surface treatment
Contact resistance
40mΩ maximum (10mA, 20mVDC)
Insulation resistance
1MΩ minimum (500VDC)
Ejector
PA resin (UL94V-0)
Dielectric withstanding voltage
500VAC for 1 minute
Metal fitting
Copper alloy (tin plating)
Substrate insertion force
126.4N less than
■
Copper alloy
Contact
Gold plating (PAGOS)
Terminal
Gold coat
Part numbers and dimensions
Part number
FCN-074B288-G/0D
FCN-074B288-G/1D
Terminal
shape
Through
hole
FCN-074B288-G/2D
Substrate
thickness
Number
of pins
1.6
288
2.4
288
Package
format
Tray
Min.
package unit
Min.
shipment unit
40 pieces
200 pieces
40 pieces
200 pieces
3.2
288
40 pieces
200 pieces
FCN-078B288-G/0
Surface mount
-
288
40 pieces
200 pieces
FCN-074B288-G/0P
Press fit
1.8 min.
288
40 pieces
200 pieces
Page 1 of 6
http://us.fujitsu.com/connectors
Data Sheet FUJITSU Component Connector FCN-074B / 078B series (DDR4 DIMM)
■
Dimensions
•
Through-hole type FCN-074B288-G/ D
Memory module conforms to JEDEC MO-309)
No. 145
No. 221
No.1
No. 77
Z Z
No. 222
No. 288
No. 78
No. 144
(148 : ejector, in closed state)
129 maximum (*)
Center line of (*)
4
21.3 max.
Polarity key center line
0.85×(77-1)=64.6±0.1
74.55
1.4±0.03
0.85×(67-1)=56.1±0.1
63.4
(141)
3.65±0.05
10 min.
Dimensions (mm)
L
FCN-074B288-G/0D
2.67
1.6
FCN-074B288-G/1D
3.18
2.4
FCN-074B288-G/2D
4.00
3.2
Unit: mm
Dimensions in ( )
is reference value.
Ejector: 162 max. in open state
•
2.5 min.
6.4 max.
3- 0.4±0.1
Applicable substrate
thickness (mm)
Part number
5 min.
14.5 min.
21.3 max.
3.9 min.
162 max.
L
0.85
Recommended printed circuIt board (Top view)
Φ2.45±0.05
No. 145
64.6
No.1
56.1
A
No. 146
No. 2
No. 221
No. 222
No. 77
No. 78
74.55
No. 288
Φ2.45±0.05
No. 144
63.4
5.95
4.3
0.85
2.45±0.08
1.1
2.7
288 -Φ0.66±0.08
Page 2 of 6
1.2±0.05
Detailed view of A
Unit: mm
Dimensions in ( ) is reference value.
http://us.fujitsu.com/connectors
Data Sheet FUJITSU Component Connector FCN-074B / 078B series (DDR4 DIMM)
Dimensions
•
Surface mount type FCN-078B288-G/0
Memory module conforms to JEDEC MO-309)
25
Z
No. 145
Z
No.288
7
■
No.1
No.144
5.575
Polarity key center line
4
Center line of (*)
21.3 min.
(145: ejector enclosed state)
128.6 minimum(*)
0.85×(67-1)=56.1±0.05
63.4
0.85×(77-1)=64.6±0.05
74.55
2.5 min.
6.5 min.
3 -0.4±0.1
(141)
1.4±0.03
3.65±0.05
5 min
14.5 min
21.3 min
3.9 min.
162 min.
10 min
Unit: mm
Dimensions in ( )
is reference value.
(Ejector: 162 max. in open state)
•
Recommended printed circuIt board pattern (Top view)
A
64.6
No.145
Φ 2.45±0.05
No. 221
56.1
No. 222
No. 288
Φ 2.45±0.05
No.1
No. 77
74.55
2.3 2.3
Detail A
Page 3 of 6
No. 144
63.4
5.95
4.3
2.45±0.08
1.8±0.03
0.57±0.03
No. 78
1.2±0.05
Unit: mm
Dimensions in ( ) is reference value.
http://us.fujitsu.com/connectors
Data Sheet FUJITSU Component Connector FCN-074B / 078B series (DDR4 DIMM)
■
Dimensions
•
Press fit type FCN-074B288-G/0P
Memory module conforms to JEDEC MO-309)
25
Z
No. 288
7
Z
No. 145
No. 1
No. 144
4.3
21.3 max.
5.575
Polarity key center line
Center line of (*)
0.85
0.85×(77-1)=64.6±0.1
φ2.1±0.08
2.4±0.2
(145: ejector, in closed state)
minimum 128.6 (*)
2.2
5.4
6.5 max.
0.85×(67-1)=56.1±0.1
74.55
141
162 max.
3.65±0.05
5 min.
14.5 min.
21.3 max.
3.9 max.
1.4±0.03
10 min.
Z-Z
Ejector in opened state
Unit: mm
Dimensions in ( )
is reference value.
Ejector in opened state Maximum 162
•
Recommended printed circuIt board pattern (Top view)
A
64.6
56.1
No. 145
φ2.45±0.05
No. 221
No. 77
No. 1
No. 78
No. 288
No. 144
0.85
288 -φ0.9±0.05 PAD
288 -φ0.6±0.01 DRILL
288 -φ0.5±0.05 PTH
Detail A
Page 4 of 6
1.6
2.2
1.6
5.95
No. 222
Unit: mm
Dimensions in ( ) is reference value.
http://us.fujitsu.com/connectors
Data Sheet FUJITSU Component Connector FCN-074B / 078B series (DDR4 DIMM)
■
Recommended soldering conditions (surface mount type)
Infrared reflow (IRS) conditions
• The temperature profile indicates a temperature indicated on the
printed circuit board surface.
• Set the metal mask thickness of the solder paste to 120µm.
Peak temperature 260°C max.
t
Na
al
ur
220°C
g
lin
oo
rc
ai
4°C/sec. max.
4
or
°C
m
c.
/se
.
ax
4°C/sec. max.
160 to 170°C
Pre-heating
220°C min.
40 sec. min.
Reference: Recommended memory module terminal shape (applicable to both surface mount/through hole/press fit)
Variation A
18.75±0.15
28.05
(11.05)
25.5
64.6
5.95
22.95
(11.05)
22.1
0.5
8
11
14.6
17.6
31.25±0.15
0.5
2.5 min
2.1
1.45 min
56.1
1.4±0.1
5.575
C
28.05
(11.05)
25.5
64.6
133.35±0.15
3.85±0.1
5.95
22.95
(11.05)
22.1
1.4±0.1
56.1
56.1
(3.35)
Component area
(rear face)
1.5±0.1
(For details see JEDEC MO-309)
5.95
64.6
56.1
(3.35)
4.3
Component area
(rear face)
2.6
2.6
4.3
2.8 min
2.1
1.45 min
133.35±0.15
3.85±0.1
5.95
64.6
Component area
(front face)
8
11
14.6
B
5.575
0.5
Component area
(front face)
Variation B
0.5
■
255 to 260°C
Actual heating
10 sec. max.
1.5±0.1
Dimensions in ( )
is reference value.
PAGOS is a trademark of Fujitsu Component Limited
Page 5 of 6
http://us.fujitsu.com/connectors
Data Sheet FUJITSU Component Connector FCN-074B / 078B series (DDR4 DIMM)
Contact
Japan
FUJITSU COMPONENT LIMITED
Shinagawa Seaside Park Tower
12-4, Higashi-shinagawa 4-chome,
Tokyo 140 0002, Japan
Tel: (81-3) 3450-1681
Fax: (81-3) 3474-2385
Email: fcl-contact@cs.jp.fujitsu.com
Web: www.fujitsu.com/jp/fcl/
Europe
FUJITSU COMPONENTS EUROPE B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: www.fujitsu.com/uk/components/
China
FUJITSU ELECTRONIC COMPONENTS
(SHANGHAI) CO., LTD.
Unit 4306, InterContinental Center
100 Yu Tong Road, Shanghai 200070, China
Tel: (86 21) 3253 0998
Fax: (86 21) 3253 0997
Email: fcal@sg.fujitsu.com
www.fujitsu.com/sg/products/devices/components/
North and South America
FUJITSU COMPONENTS AMERICA, INC.
2290 North First Street, Suite 212
San Jose, CA 95131 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components/
Asia Pacific
FUJITSU COMPONENTS ASIA, Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex,
Singapore 118529
Tel: (65) 6375-8560 / Fax: (65) 6273-3021
Email: fcal@sg.fujitsu.com
www.fujitsu.com/sg/products/devices/components/
Hong Kong
FUJITSU COMPONENTS HONG KONG Co., Ltd.
Unit 503, Inter-Continental Plaza,
No.94 Granville Road,
Tsim Sha Tsui Kowloon, Hong Kong 118529
Tel: (852) 2881 8495 Fax: (852) 2894 9512
Email: fcal@sg.fujitsu.com
www.fujitsu.com/sg/products/devices/components/
Copyright
All trademarks or registered trademarks are the property of their respective owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America,
Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Copyright ©2015 Fujitsu Components America, Inc.
All rights reserved.
Revised September 28, 2015
Page 6 of 6
http://us.fujitsu.com/connectors