Application
The   CI   unit   provides   emergency   lighting   for   industrial   applications.
The   CI   offers   high   capacity   for   higher   lamp   wattages   and   remote   capability.
The   unit   is   offered   with   6,   12   and   24   VDC   selection,   18 ‐
720   watts   capacity   and   multiple   lamp   wattages.
Strength   and   durability   with   20   gauge   steel   housing
Construction
The   C   Series   is   constructed   from   20   gauge   steel   and   finished   with   white   powder   coat   paint.
Heads   available   in   thermoplastic   PAR18   or   PAR36   or   steel   MR16.
Installation
Suitable   for   indoor   applications,   surface   or   wall   mounts.
Internal   Specifications
The   CI   series   utilizes   a   high ‐ efficiency   two   stage   charger   providing   a   fully   automatic   constant   charging   current   with   low   voltage   disconnect   protection.
All   components   used   in   the   circuitry   are   temperature   compensated.
The   charger   also   has   brownout   and   short   circuit   protection.
Charger   status   is   easily   determined   via   a   dual   diagnostic   LED   display   which   indicates   AC/ON   and   High
Charge.
An   external   push   button   test
switch   allows   maintenance   personnel   to   quickly   determine   the   operational   status   of   the   unit   and   lamp   load.
Standard   120/347   volt   input
CI
6   (Volt   DC)
12   (Volt   DC)
24   (Volt   DC)
See   rating   guide
blank   (0   Head)
1S   (PAR18,   1   head)
See   lamp   chart
2S   (PAR18,   2   head)
MR1   (MR16)
MR2   (2 ‐ MR16)
1L   (PAR36)
2L   (2 ‐ PAR36)
TDR   (Time   Delay   Relay)
*AT   (Auto ‐ test)
A   (Ammeter)
V   (Voltmeter)
FD5   (5   circuit   fuse)
*IRT   (Infra ‐ red   test)
ACTB   (Terminal   block   AC)
DCTB   (Terminal   block   DC)
RFS   (Radio   Frequency    Suppression)
Composite   Tungsten
Composite   Quartz   (Q)
MR16   (MR)
9,
8,
12,
10,
25W
12,
20W
6V
(18W  ‐  PAR36   onl y) 9,   12,   18W
12V
(25W  ‐  PAR26   onl y) 9,   18W
24V
8,   12,   20,   35W   (55W   PAR36   onl y) 12,   20W   (70W  ‐  APR35   onl y)
Sealed   Beam   Tungsten 9,   12,   18,   25,   30W
Sealed   Beam   Quartz   (QSB) 8,   12,   20W
10W
12,
8,
10,   12,   20,   35,   50W
18,
12,
25,
30W
30,   35,   50W N/A
N/A
12,   20,   35,   50W
Hubbell   Canada   LP     |     870   Brock   Road   South,   Pickering,   ON     L1W   1Z8     |     (905)   839 ‐ 1138   www.hubbellonline.com/lighting

Cabinet
#1
#2
#3
Wattage
(6V   18 ‐ 50W)   (12V   36 ‐ 72W)
(12V   L ‐ Cab   36 ‐ 72W)   (6V   80 ‐
150W)   (12V   90W)
(12V   150 ‐ 180W)   (24V   144 ‐ 180W)
A
12"   (305mm)
10"   (254mm)
14   3/4"   (385mm)
#4
#5
(12V   250 ‐ 360W)   (24V   320W)
(24V   360 ‐ 720W)
13"   (330mm)
18"   (457mm)
Note:   D ‐ Dimensions   vary   based   on   heads   supplied   refer   to   head   spec   sheet.
B
4   3/4"   (119mm)
9"   (229mm)
9   5/8"   (241mm)
10"   (254mm)
10"   (254mm)
C
2   3/8"   (58mm)
3   1/4"   (83mm)
4   1/4"   (105mm)
8"   (203mm)
8"   (203mm)
The   CI   series   utilizes   a   high ‐ efficiency   two   stage   charger   providing   a   fully   automatic   constant   charging   current   with   low   voltage   disconnect   protection.
All   components   used   in   the   circuitry   are   temperature   compensated.
The   charger   also   has   brownout   and   short   circuit   protection.
Charger   status   is   easily   determined   via   a   dual   diagnostic   LED   display   which   indicates   AC/ON   and   high   charge.
An   external   push   button   switch   allows   maintenance   personnel   to   quickly   determine   the   operational   status   of   the   unit   and   lamp   load.
Constructed   from   durable,   20   gauge   steel   and   finished   with   a   white   powder   coat   paint   finish.
Universal   mounting   pattern   stamped   into   the   back   of   the   unit   allows   for   direct   mounting   to   various   conduit   boxes.
Key   hole   slots   provided   for   additional   mounting   options.
Knockouts   are   standard   for   a   wide   range   of   options.
Remote   lamp   loads   are   connected   to   the   emergency   power   supply   with   sturdy   magnum   terminal   connectors   to   allow   for   large   gauge   wire   increasing   flexibility   of   installation.
Units   are   supplied   normally   with   two   (2)   top   mounted
PAR18   small   style   heads   when   specified.
Standard   lamp   heads   are   constructed   of   high   impact   thermoplastic   coloured   to   match   the   cabinet.
Model
CI ‐ 6 ‐ 18
CI ‐ 6 ‐ 24
CI ‐ 6 ‐ 36
CI ‐ 6 ‐ 50
CI ‐ 6 ‐ 80
CI ‐ 6 ‐ 90
CI ‐ 6 ‐ 150
CI ‐ 6 ‐ 180
CI ‐ 12 ‐ 36
CI ‐ 12 ‐ 50
CI ‐ 12 ‐ 72
CI ‐ 12 ‐ 36 ‐ L ‐ Cab
CI ‐ 12 ‐ 50 ‐ L ‐ Cab
CI ‐ 12 ‐ 72 ‐ L ‐ Cab
CI ‐ 12 ‐ 90
CI ‐ 12 ‐ 150
CI ‐ 12 ‐ 180
CI ‐ 12 ‐ 250
CI ‐ 12 ‐ 360
CI ‐ 24 ‐ 144
CI ‐ 24 ‐ 180
12
12
12
12
12
12
12
12
12
12
12
Voltage
(Output) 30   mins
6
6
6
6
18
24
36
50
6
6
6
6
80
90
150
180
24
24
90
150
180
250
360
36
50
72
36
50
72
144
180
Hubbell   Canada   LP     |     870   Brock   Road   South,   Pickering,   ON     L1W   1Z8     |     (905)   839 ‐ 1138   www.hubbellonline.com/lighting
45
75
90
123
180
18
25
36
18
25
36
Wattage   Rating
60   mins 120   mins
9
12
18
25
N/A
N/A
9
40
45
75
90
12
20
22
37
45
72
90
36
45
23
37
45
62
90
9
12
18
9
12
18