STANDARD FEATURES
•
•
•
•
•
•
Dual Voltage Input – 120/277 VAC 60 Hz., 18W
Factory cycle tested for reliability
Shipped assembled, ready to install
Easy mounting with keyhole slots & universal knockout
mounting cluster
High impact thermoplastic construction, buff white finish
Standard with (2) top mounted fixtures in buff white
SERIES 12CP
12 Volt Thermoplastic
Emergency Lighting
CHARGER/BATTERY
•
•
•
•
•
•
Solid state 2 rate charger, recharges battery within 24
hours
Sealed lead acid maintenance free battery – 8 year life
expectancy
Low battery voltage disconnect, brownout, power-on latch,
solid state switch
Temperature compensation
Controls: Red LED power on
Push to test switch
Save Installation Time
Our exclusive “QUIK-E” mounting knockouts allow your to mount
to a single gang or 4" octagon junction box without removing
the “J” box screws.
Catalog No.
Model Number
Total D.C. Wattage for Sustained Illumination
1.5 Hours
2 Hours
4 Hours
50
40
22
100
84
44
12CP50-2L
12CP100-2L
14.2"
TECHNICAL DATA
12.6"
12 Volt Wire Runs for Remote Leads
Total Watts
25
5"
100W Unit
Allowable Wire Distance
#12 Wire
#10 Wire
85'
135'
50
42'
67'
100
21'
33'
14.2"
Options
Add Suffix
12V, 25W Sealed Beam Halogen Lamps.................# - HSB12 12.6"
3 ft. Cord Set.........................................................# - CP3
Fixture:
Project:
Type:
3"
50W Unit
For Damp Location
All exits manufactured in accordance with U.L. standard 924, and meet or
exceed requirements as established by the National Electrical Code Article 700
and Life Safety Code NFPA101. Specifications subject to change without notice.
EM10.5
CDUNUE
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591
voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: sales@pathwaylighting.com