Alumdck_PrLst
6/4/07
12:02 PM
Page 2
A L U M I STA I R S
OUR PRODUCTS
This lightweight yet durable all aluminum stairway has been adapted for a variety of waterfront
applications where the portability and virtually maintenance-free features are best utilized. A 20’
Alumistair unit weights approximately 200 pounds, yet supports loads in excess of 1600 pounds. It can
be carried and installed by two individuals. Corrosion resistant aluminum, ends for all time, the problems
of painting and the danger of rotting. Its lifetime attractiveness will add immeasurably to the value and
enjoyment of any waterfront property.
Standard specifications are 45 degree approach angle, 7” tread depth, 8” riser height and 32” stair
width. handrails are 1” aluminum IPS pipe fastened to both sides of the unit. Standard lengths are 8’,
10’, 12’, 14’ 18’, and 20’. Alumistairs can also be custom fabricated for specific applications. Stairways
in excess of 100' have been fabricated where conditions allow support structures to be installed at 20'
intervals. Other options available include bulkhead brackets, leveling legs and lifting mechanisms.
®
A DIVISION OF METALLIC LADDER MFG. CORP.
ALUM
LENGTH
PRICE
QUANTITY
ID
ALUM
S
OCK
Price
Quan. Total
ORDER BLANK
S
Prices F.O.B. Randolph, NY and Subject to Change Without Notice
A L U M I STA I R S
ALUM
I F LO
MAR
AT S
ALUMIRAMPS
Length x Width
ILIFT
TOTAL
8'
10'
12'
14'
16'
18'
20'
Bulkhead Bracket
Leveling Legs (pr.)
NEW, MORE RUGGED DESIGN— The sturdy
all aluminum construction of this gangway permits one-ton load capacities yet the longest
units are light enough to be carried by two persons when used in conjunction with our
Alumifloats in the various sizes, an entire waterfront installation may be easily removed in the
event of serious storms or for seasonal storage.
The top trussing increases the load capacity
and lends support to the sturdy handrail, and in
addition, does not interfere in areas of extreme
tidal fluctuations where the ramp might lie
directly across the top of a float.
The addition of a center rail strengthens the
cross members and eliminates any side motion.
heavier and longer corner castings at the shore
end and solid bar for the axles gives additional
strength at the bulkhead hinge joint.
The price includes rugged hanger brackets for
the shore end of the Alumiramp and rubber tired
aluminum wheels or 4" swivel casters at the
float end. The walkway has cleats to provide
additional foot grip where the ramp incline is
unusually steep.
Longer alumiramps are custom fabricated to
special order. Please give dimensions required
when requesting quotation.
NO RUST + NO ROT + NO PAINTING = MIN. MAINTENANCE
INA
PLAN
KS
ALUMIRAMPS
LENGTHS
32" Wide
36" wide
42" wide
48" wide
12'
14'
16'
18'
20'
22'
24'
26'
28'
30'
32'
34'
36'
38'
40'
Note: All ramps over 30' in length are two-section ramps
with undertruss.
HOW TO ORDER: Stationary Alumidock® sections are designed for
waterfront installations where the water level does not vary too much
and only two factors need be considered. (1) The length, width and
design of the pier required. (2) The approximate height of the standards required at each 8 foot interval.
GRAND TOTAL
Alumifloat units are designed to be used as swimming floats or to
make up a floating dock or pier in tide water areas or where lake levels
drop considerably during the season. Here three factors should be
considered (1) the length, width and design of the pier required (2)
length of Alumiramp or gangway required to permit access from the
shore to the float (3) the best method to be employed in securing the
float unit.
BALANCE
Accessories may be included in your order or added at any later date.
A simple sketch of your requirements will greatly aid us in evaluating
what equipment you require.
name____________________________________________________________
telephone number (____) _________________________________________
address _________________________________________________________
city_______________________________state__________zip _____________
®
$ _____________
(less shipping)
DEPOSIT ENCLOSED $ _____________
(25% required)
$ _____________
A
STARTER SECTION
The shore end of this section has
two additional pipe sockets attached
through which the anchoring drive
pipes are inserted and driven into the
ground. (Note: if drive pipes are not
required deduct $10.00 from the price
of this section.)
CENTER SECTION B
All center sections are equipped
with two pivot pins at the shoreward
end with hinge bars and pipe sockets
to accommodate leg standard on
opposite end.
LIMITED WARRANTY
The manufacturer warrants to the consumer
that this product is free from defects in material and workmanship. All express and
implied warranties expire 1 year after the
date of purchase of the product. Repair or
replacement at no charge upon return of the
product to the place of manufacture. All consequential damages which result from the
breach of either an express or implied warranty are hereby excluded.
(800) 532-3557
41 S. Washington St. • Randolph, NY 14772
(716) 358-6201 • Fax 716 358-4736
website: http:\\ www.alumidock.com
C
END SECTION
This section differs from the center
section only that the pipe sockets for
the leg standard are located on the
extreme end to permit the addition of
right or left hand hinge bars to accommodate the installation of end platform as illustrated. (Note: It is recommended that for additional stability
that outrigger type standards be
ordered for 32" section & 4' sections.)
CENTER END SECTION D
This section is used as a platform to
form a "T or L" either to right or left of
main dock. If a "T or L" is not desired
this section would be used as the final
section
on
a
straight
dock.
Construction is same as center section with deletion of hinge bars.
SIZE
PRICE
QUANTITY
TOTAL
32'' x 8'
4' x 8'
5' x 8'
32" x 8'
4' x 8'
5' x 8'
32" x 8'
4' x 8'
5' x 8'
32" x 8'
4' x 8'
5' x 8'
Special dimensional requirements for boat slips, platforms, lengths or widths that cannot be
met using standard sizes can usually be acquired by calling our specialty products personnel
for a quote on your desired needs.
Rev. 3/05
Alumdck_PrLst
6/4/07
12:02 PM
Page 1
A L U M I D O C K ® C O M P O N E N T PA RT S
The adjustable leg standards HEIGHT
consist of heavy duty special
3'
aluminum alloy 1" I.P.S. pipe
with two cast aluminum bot4'
tom pads, complete with stur5'
dy adjustable diagonal truss
unit. (Note: To accommodate
6'
an approximate 12" to 18" dock
7'
height above the water and 6"
or more above dock, recom8'
mended standard should be 3'
9'
more than water depth.
10'
5'
The additional stability
6'
acquired from this type of standard makes their use for deep
7'
water or at the end of 32" and
8'
4' width piers very desirable.
(Note: Not required or neces9'
sary for 5' width.)
10'
6'
The addition of drive pipes
is often required in exposed
8'
areas or where boats are to be
10'
moored to a pier to give additional support and security to
12'
the installation. Price per pair
includes sockets, set screws,
fasteners, and acorns.
STANDARDS
OUTRIGGER
STANDARDS
DRIVE PIPES
32" WIDE
PRICE
4' WIDE
5' WIDE 32" WIDE
A L U M I F LOAT S
QUANTITY
4' WIDE
5' WIDE
TOTAL
LENGTH
3' WIDE
DOCK REMOVAL
LEVER
With the aid of this
lever, even a 5' x 8'
dock section can be
removed by one person. Includes lever,
hook and 20' of
rope.
Price
Quan.
Total
5' WIDE
3'
4'
5'
10'
TOTAL
Piling
Diam.
Up to
12"
Price Quan. Total
A standard 5' x 8'
Alumifloat weights 158
lbs. and will support a
load capacity of over
1500 pounds.
15'
16'
20'
* 4' wide is actually 52" wide
ALUMIDOCK® BOAT
FENDERS
Rugged constructed
fenders designed to
attach to leg standard
to provide 2" thick
padded protection for a
boat and adjustable for
height as required.
Ht.
2'
3'
Price/Ft. Quan. Total
Price Quan. Total
HANDRAIL
This rugged aluminum
handrail is fabricated
with 1" I.P.S. Aluminum
pipe and ‘T’ or ‘L’ aluminum fittings. The
uprights are attached
to the side rails using
aluminum sockets.
Dock
Float
With mid-rail add $1.75 per ft. for tubing
$4.50 per ft. for 1" I.P.S.
Ht.
3'
4'
5'
6'
FLOAT DOLLY WHEELS
When staff is at a minimum,
the float dolly wheels can
enable two people to install
or remove even the large 5’
x 20’ float. Simply screw on
the wheels at the floats mid
point and push them where
ever you need to go.
Price Per Pair Quan. Total
Price Per Set Quan. Total
ALUMILIFT
All aluminum manually
operated platform type boat
lifts. Furnished with 2" x 8"
wood longitudinal bunks.
Write or call regarding availability and prices of special
purpose bunks, adjustable
legs for leveling, platform
guide posts, electrically powered winches, canopies, boarding
planks and motor stops.
Wheels and axles are available for all lifts to aid in the installation and removal.
Model
Load Capacity
Model 15
1500 lbs.
Model 25
2500 lbs.
Model 25 W 2500 lbs.
Model 35
3500 lbs.
Model 45
4500 lbs.
Wheels and axles
(all models)
PRICE
QUANTITY
TOTAL
A L U M I F LOAT S AC C E S S O R I E S
HEAVY DUTY RAMP
This
H.D.
Ramp,
equipped with shore
hinge bracket and float
hinge pins is used to
connect
Alumifloat
installations to the
shore line.
ADJUSTABLE
STRAIGHT LADDER
This adjustable ladder
permits a variance in
height of approximately 12" and because of
its design adds considerable support and stability to an installation
wherever
attached.
Price Quan. Total Complete with fasteners.
Price
Price Per Foot
Quan.
Size
6"
Price Per Foot Quan.
Quan.
Total
Price Quan. Total
Size
10'
15'
20'
Quan.
Total
L I F E G UA R D STA N D
MARINA PLANKS
Total
COUPLING U-BOLT
ASSEMBLY
High tensile stainless
steel bolts with ’T’
cross
straps,
lock
washers and nuts
inserted thru corners
allow alumifloats to be
joined end to end or
side to side. Four
assemblies per joint
required.
Price
Total
MOORING CLEATS
Sturdy cast aluminum
boat mooring cleat
complete with fasteners. (May be used on
either Alumidock® or
Alumifloat units.)
Price
SOCKETS
3-1/8" sockets of heavy
duty cast aluminum
are
necessary
for
attaching the drive pipe
to the alumifloat sections. Comes complete
with wear plate and
mounting hardware.
Two sockets needed for
each drive pipe. Use 2"
IPS pipe.
Panelling
Screening
FLOAT LADDER
Three-step float ladder
for swimmers may be
attached easily to the
side of any float with
fasteners and sockets
supplied. The ladder is
easily removed by
loosening four allen set
screws.
Price
PANELING AND
SCREENING
To prevent damage to
floatation material, the
bottom is covered with
vinyl coated screening
and sides with aluminum panels—keeps
out muskrats.
Quan. Total
8'x5' H.D.
8'x4' H.D.
8'x3' H.D.
LIFE LINE
Beauty and safety combined is acquired by
adding this important
accessory
to
your
Alumidock® installation.
Double strung white
rope threaded through
upright posts which fit firmly over the “above
deck” exposed portion of the leg standard or
drive pipe. (Price complete with necessary rope
and posts.)
ALUMINUM ACORN
A
cast
aluminum
rounded plug designed
to drive snugly into 1"
IPS standard pipe.
Protects against sharp
edges and adds symmetry to the standards.
Price Per Pair Quan. Total
RING BUOY HOLDER
Safety conscious waterfront
directors will insist on this 5’
high by 42” long all aluminum ring buoy holder
with reach pole holder clips.
It can be used on either floating or stationary docks.
Please specify when ordering.
Price Each
Quan. Total
ADJUSTABLE
HINGE UNIT
This hinge unit is used
to couple one float to
another at right angles
with the feasibility of
moving the hinge unit
laterally along a float
walkway by just loosening the bolts and
sliding along the float
siderails.
12'
DOCK CORNER
HINGE ASSEMBLY
The addition of this
assembly is required
to permit the attaching of platform sections to the left or
right of the main
pier. Complete with
triangular dock section, one straight
hinge bar, one angle
hinge bar, fasteners
Price Quan. Total
and a single standard with acorn.
ALUMIDOCK®
BENCH
No pier is complete
without the inclusion
of this soft upholstered weather-tested bench to enhance
the
beauty
and
enjoyment of a pier
installation. 4' wide,
complete with fasteners and mounting
Width Price Quan. Total brackets. May be
attached to either an
4'
Alumidock®
or
Alumifloat unit.
4' WIDE *
QUANTITY
8'
A L U M I D O C K ® AC C E S S O R I E S
Right
Left
PRICE
ALUMIFLOATS
The expanded polystyrene floatation of
these units is sandwiched or locked in
under compression by
a top and bottom
framework of sturdy
rectangular and tubular shaped aluminum
members with specially designed aluminum
planks fastened firmly
by concealed rivets to
make up the solid decking surface. The various fasteners which
permit practical and
functional designs by a
simple
“add-a-unit”
method are described
below.
ROLLER CHAIN PILING
GUIDE
Use to secure floats to
either wooden pilings
or pipe. Minimizes
jambing or wedging in
certain problem situations. Includes aluminum guide angles,
aluminum wear plates,
fasteners and rust
resistant coated steel
chain and rollers.
TIE RODS AND
TOP PINS
The hollow rung
type material used
in bottom framework construction of
each Alumifloat unit
permits the insertion of these tie rods
to facilitate coupling
floats side by side.
Top pins are insertPrice Quan. Total ed in rungs on decking section.
Quan.
Total
ALUMIFLOAT BOAT
FENDER
Specially
designed
rubber boat fender
material
may
be
attached
to
the
exposed edge of any
Alumifloat unit with
fastening washers and
screws at the factory or
on location.
Price
Quan.
Total
BLOCK ANCHOR
AND CHAIN
A definite security feature for your Alumifloat installation. The
block anchor and chain
used with the eye bolt
assembly will keep
your installation where
you want it. The anchor,
a gray iron casting,
weighs ap-proximately
70#.
EYE BOLT
Stainless steel eye bolt
designed to fit thru the
corner of the float units
to afford a fastener to
which anchor lines or
chains may be secured.
Price
Price Per Foot Quan. Total
Quan.
Rugged light weight aluminum construction. Standard platform measures 48” x 32” and is 5’ high.
The 2’ wide soft upholstered weather-tested bench provides
comfortable seating without compromising lifeguard alertness. The single 36” high guard rail assures safety without
obstructing vision.
Models available for secure mounting on both Alumidocks
and Alumifloats and for free-standing use on the beach or in
the water. The free-standing model can be easily moved by
two persons. Ask for a quotation of other sizes or heights for
your special requirements.
The marina plank is for the marina owner who
has satisfactory leg stantions in place, but is
looking for a more reliable walkway to replace
the unsafe, splintering wood planks he presently
has. The all aluminum plank with slip resistant
decking will give you many years of maintenance
free service. Marina planks are custom made in
lengths up to 30’ and width to 24” wide. Marina
planks require leg stantions every 10’.
16” wide 20” wide 24” wide
16’
18’
20’
22’
24’
26’
28’
30’
Seawall attachment angle
Length x Width
Total
Application
Float or Dock
Free Standing
Price
Quan. Total
Price
Quan. Total