Address: Rm. 809 Teheran Office Bldg., 707-38 Yeoksam-dong
Gangnam-gu, Seoul 135-080, Korea
Tel:
+82-2-564-3971
Fax:
+82-2-564-3973
Email:
ksae1@ksae.org
Website: www.ksae.org
Welcome Message
CONTENTS
Welcome Message
1
Overview of IPC-13
3
IPC-13 Committee
4
Program Summary
5
Schedule
6
Floor Plan
7
Opening Ceremony
8
Plenary Sessions
9
Oral Session I
10
Oral Session II
12
Oral Session III
14
Oral Session IV
16
Oral Session V
18
Poster Session
20
Closing Ceremony
22
Technical Visit
22
Social Program
23
Student Program
24
Other Meetings
24
Optional Tour
25
General Information
26
Accommodation
27
How to Get to the Venue
28
Onsite Guidelines
29
It is my great pleasure that I welcome the distinguished delegates and participants to
“The 13th International Pacific Conference on Automotive Engineering (IPC-13)”, which is
held in Gyeongju, Korea.
Recently, the automotive technology is focused on the development of zero emission
vehicles and comfortable mobility of vehicles. In this point of view, the theme of IPC-13,
“Harmony of Humans and Motor Vehicles,” has a very important meaning for the
development of new concept vehicles with promoting the relationship between the
humans and vehicles.
The aim of the IPC-13 is to provide up-to-date and relevant information and also to
contribute to the development of the field of automotive engineering and automobile
industry through this conference consisting of plenary lectures, technical sessions,
student program, and technical visit.
In this conference, more than 230 referred technical papers will be presented by highly
qualified authors from over 13 countries during the three days of the conference. They
will cover the most advanced technology in Propulsion, Emission & Environment,
Chassis, Electronics, Design, Manufacturing & Materials, New Energy Vehicles, and the
others.
Here in Gyeongju, I hope you will not only take a full advantage of IPC-13 Conference to
exchange new information and technology on automotive engineering, and to develop
friendships among participants, but also enjoy tour in beautiful place, Gyeongju, which is
a large museum without walls containing countless valuable treasures of the Shilla
Kingdom for over 1000 years.
I would like to express my deepest gratitude to all the participants, authors who
submitted enlightening papers, and the members of IPC-13 Organizing Committee. I
expect that IPC-13 will contribute to the development of automotive technologies and its
applications.
I sincerely hope that you will receive a great deal of benefits from the conference and
have a pleasant stay in Gyeongju, Korea.
Prof. Chang-Sik Lee
Chairman
IPC-13 Organizing Committee
CONTACT - IPC-13 SECRETARIAT
KSAE (The Korean Society of Automotive Engineers)
Rm. 809 Teheran Office Bldg., 707-38 Yeoksam-dong, Gangnam-gu, Seoul 135-080, Korea
E-mail: ksae@ipc13.org
URL: http://www.IPC13.org
ᶀᶀᶀ
1
ᵾᵾᵾ
Welcome Message
Overview of IPC-13
On behalf of the Korean Society of Automotive Engineers (KSAE), it is a great pleasure
to welcome you all to the 13 th International Pacific Conference on Automotive
Engineering (IPC-13). IPC-13 will take place in Gyeongju, Korea, from 22 to 24 August,
2005. It is the second time that KSAE is organizing the international conference on
automotive engineering, the first being in Seoul in 1991.
Under the theme “Harmony of Humans and Motor Vehicles,” the IPC-13 will provide the
latest information on the status of research, development and application on automotive
engineering and manufacturing technologies.
IPC-13 aims to create more opportunities for automotive engineers in the Pacific Rim
nations to communicate their ideas. Accordingly, brilliant speeches and sessions have
been prepared for the whole three days so that participants can share their technical
knowledge and information on Automotive Engineering across member countries. This
conference will be not only an opportunity for academia in Automotive Engineering to
interact, but also a festival for the participants to gain an unforgettable memory in Korea.
Located in the core of the Korean historical heritages, Gyeongju will provide you with a
vast amount of cultural attractions.
Title
The 13th International Pacific Conference on Automotive Engineering (IPC-13)
Theme
“Harmony of Humans and Motor Vehicles”
Dates
August 22-24, 2005
Venue
Hotel Hyundai, Gyeongju, Korea
Organizer
The Korean Society of Automotive Engineers (KSAE)
Patronage
The International Federation of Automotive Engineering Societies (FISITA)
Ministry of Science & Technology (MOST)
Ministry of Commerce, Industry & Energy (MOCIE)
Ministry of Construction & Transportation (MOCT)
Ministry of Environment (ME)
Supporters
The Province of Gyeongsangbuk-do
Korea Automobile Manufacturers Association (KAMA)
The Korean Federation of Science and Technology Societies (KOFST)
Lastly, I would like to express my sincere gratitude to the Organizing Committee, who
has put tremendous efforts in making the conference a great success. I hope that the
objectives of this conference will be successfully achieved, contributing to enhancing
cooperation among the Asia Pacific region. I welcome you all and hope to meet many of
you personally throughout the duration of the conference.
Korea Science and Engineering Foundation (KOSEF)
Korea Research Foundation (KRF)
Korea National Tourism Organization (KNTO)
Language
English
Australasia (SAE-A), China (SAE-C), India (SAE-India), Indonesia (IATO),
IPC Members
Japan (JSAE), Korea (KSAE), Sri Lanka (IAE), Thailand (TSAE),
USA (SAE-International), Vietnam (VSAE)
Prof. Kyung Ok Cha
President
The Korean Society of Automotive Engineers (KSAE)
[IPC Members]
[Organizer]
KOREA (KSAE)
http://ww.ksae.org
IPC
Members
[Patronage]
FISITA
http://ww.fisita.com
ᶀᶀᶀ
2
ᵾᵾᵾ
ᶀᶀᶀ
3
ᵾᵾᵾ
IPC-13 Committee
Program Summary
ᵄ IPC-13 Organizing Committee
ᵄ International Organizing Committee
Chairman
SAE-A (Australasia)
Mr. Rober Judd, Autoliv Australasia
SAE-C (China)
Dr. Ge Songlin, Deputy secretary General of SAE-C
IATO (Indonesia)
Dr. Ir. Indera Nurhadi, MSME,
Institut Teknologi Bandung
Dr. Ir. Muljowidodo Sastrodinoto,
Institut Teknologi Bandung
JSAE (Japan)
Prof. Takemi Chikahisa, Hokkaido University
IAE (Sri Lanka)
A G Samarasekera, General Secretary
TSAE (Thailand)
Mr. Adisak Rohitasune, TSAE
Mr. Ninnart Chaithirapinyo,
Toyota Motor Thailand Co., Ltd.
SAE-International (USA)
Dr. James Smith, West Virginia University
VSAE (Vietnam)
As. Prof. Dr. Du Quoc Thinh, VSAE
Prof. Chang-Sik Lee, Hanyang University
Technical Committee
Chairman Prof. Kwang Min Chun, Yonsei University
Dr. Hyun Soon Lee, Hyundai Motor Company
Committee Members
Dr. Joong Hee Kim, Renault Samsung Motors
Prof. Myoungho Sunwoo, Hanyang University
Prof. Hoon Huh, Korea Advanced Institute of
Science & Technology
Prof. Suk Ho Chung, Seoul National University
Prof. Seung Jin Heo, Kookmin University
Prof. Jung-Ha Kim, Kookmin University
Prof. Kun Soo Huh, Hanyang University
Prof. Daeyup Lee, Inha University
Prof. Yong Hoon Jang, Yonsei University
Program Committee
Chairman Prof. Byeong-Soo Lim, Sungkyunkwan University
Mr. Jaeman Kim, KIA Motors Corporation
Committee Members
Prof. Hyun Woo Lee, Pusan National University
Dr. Seong Chul Lee, Hyundai Motor Company
Prof. Kyung Hoon Kim, Kyung Hee University
Prof. Sung Mo Yang, Chonbuk National University
Prof. Moon Sik Han, Keimyung University
Prof. Yeong Il Park,
Seoul National University of Technology
Mr. Pyong Wan Park,
GM Daewoo Auto & Technology
Prof. Ki Hyung Lee, Hanyang University
Prof. Jae-Geon Oh, Doowon Technical College
August 21 (Sun)
SAE-A (Australasia)
Mr. David Ford, SAE-A Vice President
SAE-C (China)
Mr. Fu Yuwu, SAE-China Vice President
IATO (Indonesia)
Ir. Hasiholan Sidabutar, IATO President
JSAE (Japan)
Mr. Michiyoshi Hagino, JSAE President
IAE (Sri Lanka)
Dr. T A Piyasiri, University of Moratuwa
TSAE (Thailand)
Assoc. Prof. Phulporn Saengbangpla, TSAE President
SAE-International (USA)
Mr. Duane Tiede, 2004 SAE-International President
VSAE (Vietnam)
Dr. Nguyen Xuan Chuan,VSAE President
Financial Committee
Chairman Prof. Simsoo Park, Korea University
Dr. Ki-Joon Yu, GM Daewoo Auto & Technology
Committee Members
Prof. Jae Kyung Shim, Korea University
Public Relations Committee
Chairman Dr. Yung Myun Yoo, KATECH
Committee Members
Mr. Yung Yeal Lee, Doosan Infracore Co., Ltd.
Mr. Yong Kyu Roh, Hyundai Mobis Co., Ltd.
August 23 (Tues)
Registration
09:00-10:00
Oral Session III
4
ᵾᵾᵾ
Oral Session V
Opening Ceremony
10:00-11:00
Break
Plenary Session I
11:00-12:00
Break
Plenary Session II
Closing Ceremony
12:00-13:00
Lunch
Lunch
Farewell Lunch
13:00-14:00
14:00-15:00
Oral Session I
15:00-16:00
16:00-17:00
Registration
Break
FISITA
Executive
Board
Member
Meeting I
Oral Session II
18:00-19:00
SAE-IPC
Oral Session IV Members
Meeting
Break
FISITA
Executive
Poster Student
Board
Session Program
Member
Meeting 2
19:00-20:00
Welcome Reception
Conference Banquet
20:00-21:00
21:00-22:00
Secretariat
KSAE
Mr. Eun-Tae Kim, General Secretary
ᶀᶀᶀ
August 24 [Wed]
Registration
08:00-09:00
17:00-18:00
ᵄ International Advisory Committee
August 22 (Mon)
ᶀᶀᶀ
5
ᵾᵾᵾ
Technical Visit
(Hyundai Motors
Ulsan Plant)
Schedule
Floor Plan
Sunday, August 21
14:00~19:00
Registration (Convention Hall Lobby)
19:00~21:00
Welcome Reception (Terrace Garden, Hotel Hyundai)
08:30~17:00
Registration (Convention Hall Lobby)
Hotel Hyundai B1
Monday, August 22
10:00~10:30
Opening Ceremony (Convention Hall)
10:30~12:00
Plenary Session I (Convention Hall)
12:00~13:30
Oral Session I
13:30~15:50
15:50~16:20
Oral Session II
16:20~18:20
Lunch (Topaz & Crystal)
Code
Place
MP01
MP02
MP03
MP04
Convention Hall A Convention Hall B Convention Hall C Diamond Hall
MP05
Emerald
MP06
Ruby
MP07
Sapphire
Name
Advanced
Combustion
Processes
VSA (Vehicle
Sensors &
Actuators )
&Diagnostics
Noise &
Vibration I
Testing &
Instrumentation
SI Engine I
DPF
Advanced
Brake System I
Coffee Break I
Code
Place
ME01
ME02
ME03
ME04
Convention Hall A Convention Hall B Convention Hall C Diamond Hall
ME05
Emerald
ME06
Ruby
Name
Transmission,
Driveline &
Electronic
Engine Control
Automotive
Electronics
Noise &
Vibration II
SI Engine II
PM & Nox
Reduction
Advanced
Brake System II
Tuesday, August 23
08:00~17:00
Oral Session III
08:10~10:30
Registration
Code
Place
TA01
TA02
TA03
TA04
Convention Hall A Convention Hall B Convention Hall C Diamond Hall
TA05
Emerald
TA06
Ruby
TA07
Sapphire
Name
CI Engine I
Embedded
System
Reliability &
Robust Design I
Standards &
Regulations
Alternative
Powerplants I
Emission
10:30~11:00
Coffee Break II
11:00~12:00
Plenary Session II (Convention Hall)
12:00~13:30
Oral Session IV
13:30~15:50
Vehicle
Dynamics &
Simulation I
1. Convention Hall A
2. Convention Hall B
3. Convention Hall C
4. Diamond Hall
5. Topaz
6. Banquet Office (Secretariat Office)
7. Convention Hall Lobby (Registration Desk, Poster Session)
Lunch (Topaz B1 & Crystal )
Code
Place
TP01
TP02
TP03
TP04
Convention Hall A Convention Hall B Convention Hall C Diamond Hall
TP05
Emerald
TP07
Sapphire
Name
CI Engine II
ITS, Telematics
& IVN
Structural
Crashworthiness
Alternative
Powerplants II
13:30~15:50
SAE-IPC Member Meeting (Opal)
15:50~16:20
Coffee Break III
PM
Measurement
16:20~18:20
Poster Session (Convention Hall Lobby)
16:20~18:20
Student Program (Ruby)
19:00~21:00
Conference Banquet (Convention Hall)
Vehicle
Dynamics &
Simulation II
Hotel Hyundai 2F
Wednesday, August 24
Oral Session V
08:10~10:30
Code
Place
WA01
WA02
WA03
WA04
Convention Hall A Convention Hall B Convention Hall C Diamond Hall
WA05
Emerald
WA06
Ruby
WA07
Sapphire
Name
HEV & FCHEV
Advanced
Suspension
System
Reliability &
Robust Design II
Lightweight
Materials,
Interiors &
Recycling
Environment
Emission &
Regulation
Advanced
Steering
System
10:30~11:30
Coffee Break IV
11:30~12:30
Closing Ceremony & Handover of APAC-14 (Convention Hall)
12:30~13:30
Farewell Lunch (Convention Hall)
14:00~17:30
Technical Visit (Hyundai Motors Ulsan Plant)
Advanced Propulsion
Advanced Electronics
Emissions & Environment
Design, Manufacturing & Materials
ᶀᶀᶀ
6
ᵾᵾᵾ
8. Emerald
9. Ruby
10. Sapphire
11. Opal
12. Maple (Organizing Committee Office)
13. Mahogany (VIP Room)
14. Business Center (Internet Cafe, Preview Room)
Advanced Chassis
ᶀᶀᶀ
7
ᵾᵾᵾ
Opening Ceremony
Date
Time
Place
Plenary Session II
Date
Time
Place
Chair
August 22, 2005
10:00~10:30
Convention Hall
Master of Ceremony
Prof. Myoungho Sunwoo
Hanyang University
Welcome Address
Prof. Chang-Sik Lee
Chairman of IPC-13 Organizing Committee
Congratulatory Address I
Mr. Eui Geun Lee
Governor of Gyeongsangbuk-do Province
Congratulatory Address II
Dr. Akihiko Saito
FISITA President Elect
August 23, 2005
11:00~12:00
Convention Hall
Prof. Simsoo Park, Korea University
Speech I
Dr. John Gary Smyth
Director for Powertrain Systems Research Lab of General Motors
R&D and Planning
Speech Title: “Automotive Propulsion Systems: General Motor’s
Perspective on Meeting Today’s and Tomorrow’s
Challenges”
Speech II
Dr. Jochen Bergmann
Head of Department of Application Engineering Electronic Diesel
Injection Systems of Robert Bosch Korea Mechanics &
Electronics Ltd.
Speech Title: “Clean Efficient Diesel Power”
Plenary Session I
Date
Time
Place
Chair
August 22, 2005
10:30~12:00
Convention Hall
Prof. Myoungho Sunwoo, Hanyang University
Speech I
Mr. Michiyoshi Hagino
Senior Managing Director of Honda Motor Co., Ltd.
Speech Title: “Harmony of Humans and Motor Vehicles”
Speech II
Dr. Moon-Sik Kwon
Senior Executive Vice President of Hyundai Kia Motors
Speech Title: “A New Challenge for Hyundai Kia Motors”
Speech III
Prof. Harry Watson
SAE-Australasia President
Speech Title: “Passenger Car Powertrains - Opportunities and
Prospects for 2020”
ᶀᶀᶀ
8
ᵾᵾᵾ
ᶀᶀᶀ
9
ᵾᵾᵾ
Oral Session I
Oral Session I
ᵄ 13:30~15:50, 22 (Monday) August, 2005
08:30~17:00
10:00~10:30
10:30~12:00
13:30~15:50
15:50~16:20
16:20~18:20
ᵄ 13:30~15:50, 22 (Monday) August, 2005
Registration
Opening Ceremony
Plenary Session I
Oral Session I
Coffee Break
Oral Session II
[MP01] Advanced
Combustion Processes
08:30~17:00
10:00~10:30
10:30~12:00
13:30~15:50
15:50~16:20
16:20~18:20
[MP02] SI Engine I
[MP03] DPF
[MP04] Advanced Brake
System I
Registration
Opening Ceremony
Plenary Session I
Oral Session I
Coffee Break
Oral Session II
[MP05] VSA (Vehicle Sensors &
Actuators) & Diagnostics
[MP06] Noise & Vibration I
[MP07] Testing & Instrumentation
Place : Convention Hall A
Place : Convention Hall B
Place : Convention Hall C
Place : Diamond Hall
Place : Emerald
Place : Ruby
Place : Sapphire
Chair Dr. Kernyong Kang
(Korea Institute of Mechinery & Materials, Korea)
Chair Dr. Yasuo Moriyoshi
(Chiba University, Japan)
Chair Dr. Soongkee Kim
(GM-Daewoo, Korea)
Chair Dr. Satoshi Kato
(Kanazawa Institute of Technology, Japan)
Chair Prof. Woong-Sup Yoon
(Yonsei University, Korea)
Chair Dr. Chong Cheng
(Xihua University, China)
Chair Dr. Yong Hoon Jang
(Yonsei University, Korea)
Chair Dr. Renyun Sun
(XiHua University, China)
Chair Prof. Jaehong Park
(Seoul National University, Korea)
Chair Prof. Zhong Zhang
(Toyohashi University of Technology, Japan)
Chair Prof. Semyung Wang
(GIST, Korea)
Chair Dr. Yasuhiro Honda
(Kokushikan University, Japan)
Chair Dr. Keyoung Jin Chun
(Korea Institute of Industrial Technology, Korea)
Chair Mr. Tomoaki Kodama
(Kokushikan University, Japan)
[43] Research on the Turnover Fuel
cut Valve in the Fuel Injection System
of a Two-Wheeled Small Vehicle
* Mr. Toichiro Hikichi, Mr. Toshio
Yamamoto (Honda R&D Co., Ltd. Asaka
R&D Center, Japan)
[98] Performance simulation of an inline 6 engine considering VVT
strategy using WAVE
Mr. Byoungkeun Oh, * Mr. Choongsik
Kim (GM Daewoo Auto & Technology
Co., Korea)
[122] Improvement of Brake Squeal
Noise using the Laser Vibrometer
* Mr. Won Seok Choe, Mr. Myoungkoo
Chung (GMDAT, Korea)
[227] Development of a new Misfire
Detection System using Neural Network
Prof. Myoungho Sunwoo, Student. Maru Yoon,
* Student. Minkwang Lee (Hanyang University,
Korea), Dr. Seungbum Park, Mr. Kisang Lee
(HMC & KMC, Korea)
[219] Noise Reduction of Automobile Using
Zwicker's Loudness
Mr. Junghwan Kang (LG Electronics, Korea), *
Prof. Semyung Wang (GIST, Korea)
[321] Numerical Evaluation of Squish
Induced Flame Propagation in SparkIgnition Engines
* Mr. Chalothorn Thumthae (Department
of Mechanical Engineering, Kasem
Bundit University, Thailand)
[47] Ignition and Combustion
Modeling with G-Equation in Spark
Ignition Engines
* Dr. Xiaofeng Yang, Mr. Toshihiro
Ohashi, Mr. Toru Takabayashi, Mr.
Shunichi Kubota, Mr. Hideki Katsuyama,
Mr. Yasuhiro Urata (Honda R&D Co.,
Ltd., Japan)
[26] Oxidation Characteristics of
Particulate Matter on Diesel Warm-up
Catalytic Converer
* Prof. Byungchul Choi, Student.
Youngbae Yoon, Student. Hanyong
Kang, Student. Piao Fengai, Prof. Lim
MyungTaeck (Chonnam National
University, Korea)
[6] A Study on Improvements of Residual
Stress of Pipe Bending
* Mr. SeungGyeong Jeon, Mr. JaeHyung Kim
(Hwa-seung Rubber & Automotive, Korea), Dr.
JoonHyung Kim (HS R&A., Korea), Dr.
JaiYoon Shin (Yonsei University, Korea), Dr.
SangGeul Lee (Korea Branch Science Institute,
Korea)
[70] Drastic Improvement of Thermal
Efficiency by Rapid Piston-Movement
Near TDC
* Dr. Yasuo Moriyoshi, Mr. Masaki Sano
(Chiba University, Japan), Mr. Koji
Morikawa, Dr. Makoto Kaneko (Fuji
Heavy Industries, Japan)
[99] Heat Transfer and Thermal Stress
Analysis of Exhaust Manifold in
Unsteady Condition
* Mr. Jiho Choi, Dr. Seongho Yoon (GM
Daewoo Auto & technology Co, Korea)
[131] Combustion and Emission
Characteristics of Normal-Heptane
Fueled HCCI Engine
* Dr. Dae Sik Kim, Mr. Young Hoon
Yoon, Mr. Myung Yoon Kim, Prof. Chang
Sik Lee (Hanyang University, Korea)
[105] Use of LPG to Obtain Cleaner
Fuel for the Environment and to
Control Knock in SI Engines
* Dr. T. A. Fauzi Soelaiman, Dr. Toto
Hardianto, Mr. Artono Setiadi (Institut
Teknologi Bandung, Indonesia)
[274] Combustion Control in a HCCI
engine with Suppression of Low
Temperature Oxidation by Methanol Influence of Compression Ratio and
Octane Number of Main Fuel on
Combustion and Operating Range * Prof. Hideyuki Ogawa, Prof. Miyamoto
Noboru (Graduate School of Hokkaido
University, Japan), Mr. Kunihiko Azuma
(Mitsubishi Motor, Japan
[334] Multi-Region Statistical
Modeling for dual CVVT Engine
* Mr. In Sang Ryu, Mr. Seung Woo Lee,
Mr. Il Joong Hwang, Mr. Chun Woo Lee,
Dr. Woo Tai Kim (Gasoline Engine Test
Team, R&D Division for Hyundai Motor
Company, Korea)
[137] Spray and Combustion
Characteristics of GTL Fuel
Dr. Kiseong Kim, * Student. Vladimir
Beschierre (Yosu National University,
Korea), Dr. Dongsoo Jeong, Dr.
Yonggyu Lee (Korea Institute of
Machinery and Materials, Korea)
[11] Clean City Busses - Swiss
experiences about refitting with DPF's
* Dr. Jan Czerwinski (University of
Applied Sciences Biel-Bienne, CH,
Switzerland), Mr. Felix Reutimann,
Mr. Daniel Zuercher (BUWAL, Korea),
Mr. Andreas Mayer (TTM, Korea)
[155] The development of LPG
injection controller for reducing PM at
exhaust pipe
* Mr. Hyunsik Song, Mr. Baekhaeng Lee,
Mr. Donghyun Shin, Dr. Byungwoo Kim
(Korea Automotive Technology Institute,
Korea)
[170] Rigorous Modeling of Pressure
Drops for Single Channel DPF
Filtration
* Student. Seung-chai Jung (Department
of mechanical engineering of Yonsei
University , Korea), Student. Jong-sun
Park, Prof. Woong-uup Yoon
(Department of mechanical engineering
Yonsei University, Korea)
[210] Geometric Effects of Wall Flow
Monoliths on Pressure Drop
Dr. Soong Kee Kim, * Mr. Ki Kyong Bae
(GM Daewoo Auto& Technology Co.,
Korea), Dr. Geon-Seog Son, Mr. Eui
Rak Choi (Neophotech Inc., Korea), Dr.
Byung-Chul Choi (Chonnam University,
Korea), Dr. Dong-Ryul Rhim (Institute
for Advanced Engineering, Korea)
[160] Optimal Target Wheel Slip
Tracking Using The Adaptive Sliding
Mode Control
* Student. Daegun Hong, Prof. Kunsoo
Huh (Hanyang University, Korea), Dr.
Paljoo Yoon, Dr. Hyoung-Jin Kang, Mr.
Inyong Hwang (Mando Corporation,
Korea)
[230] Sensibility Analysis about
Structure Parameters to Braking
Torque of Eddy Current Retarder
* Mr. Ren He, Ms. Fengyan Yi , Mr.
Chengye Liu (School of Automobile and
Traffic Engineering, Jiangsu University,
China)
[235] The Numerical Analysis of the
Unsteady Thermal Field of the Rotor
Plate for Eddy Current Retarder Using
a New Style of Varying Time Step
Method
Dr. Chengye Liu , * Prof. Ren He , Dr.
Fengyan Yi (School of Automobile and
Traffic Engineering, Jiangsu University,
China)
[195] New Adhesion Control Method
for In-Wheel-Motor Driven Electric
Vehicle
* Prof. Hui Chen, Student. Zhiqiang Du,
Student. Jianling Zuo, Student. Ju Wang,
Dr. Guirong Zhuo, Prof. Zhuoping Yu
(Tongji University, China)
[55] Knocking Detection by Complex
Wavelet Instantaneous Correlation
* Prof. Zhong Zhang, Prof. Satoshi Horihata,
Prof. Tetsuo Miyake (Toyohashi University of
Technology, Japan)
[198] An extraction algorithm of simplified IT
characteristics curve from standard
Intelligent Power Switch (IPS) parameters
* Mr. Shiva Ram Krishna, Mr. Ealgoo Kim, Mr.
Taeyeon Lee , Mr. Jihoon Lim, Mr. Xuefeng Jin,
Prof. Jaehong Park, Mr. Peng Shuai (Seoul
National University, Korea), Mr. Hwanggeol
Lee, Mr. Hyunmo Kang, Mr. Jangdon Choi
(Hyundai Motor Company, Korea)
[166] Design of Unmanned Vehicle with
Obstacle Detection and Avoidance
Algorithm using Ultrasonic Sensors
* Mr. Il Jin Nam, Mr. Hee Chang Moon, Dr.
Jung Ha Kim (Kookmin University, Korea)
[346] Development of a Simple Control
Algorithm for Swirl Motor Controller
* Prof. Wootaik Lee, Student. Jongjin Kang
(Changwon National University, Korea), Mr.
Kyuchul Shin, Mr. Dong Pil Chun (Hyundai
Autonet, Korea)
[35] Application of Beamforming Method to
Identification of Sources of Vehicle Pass-by
Noise
* Mr. Yukihiko Hanzawa (Honda R&D Co.,Ltd,
Japan)
[73] Commercially Successful
Magnetorheological Fluids: Stability and
Durability Achieved after Decade of
Research and Development
Mr. Shigeru Shutto (Lord Far East, Inc., Japan),
* Mr. James R. Toscano (Lord Corporation,
United States)
[50] Aero-acoustic measurement of vehicle
using Surface Microphone in wind tunnel
* Mr. Masaki Tsuchiya, Mr. Tsuyoshi Yamashita
(Honda R&D Co.,Ltd. Tochigi R&D Center,
Japan), Mr. Niels V.Bogholm (B&K Sound &
Vibration Measurement A/S, Denmark), Mr.
Toshikazu Sato , Mr. Masateru Kimura (B&K
Division of Spectris Co.Ltd., Japan)
[314] Optimization and Evaluation to
improve combustion noise for the
passenger vehicle with a diesel engine
* Mr. Dongkyu Yoo, Dr. Kootae Kang, Mr. Insoo
Jung, Mr. Jaemin Jin (Hyundai Motor Company,
Korea)
[52] Development of Torsional Damper with
Crowds of Steel Balls
* Mr. Motohiro Sato, Prof. Takashi Matsuda
(Shizuoka University, Japan)
10
ᵾᵾᵾ
[68] Comparison of Wears in the Engine
Valve and Seat Insert Depending on Valve
Materials
* Dr. Keyoung Jin Chun, Mr. Jae Soo Hong, Mr.
Jae Hak Kim (Korea Institute of Industrial
Technology, Korea), Mr. Sung Jeon Hyung, Mr.
Chung Sik Shin (Anjun Industrial Co., Ltd.,
Korea)
[91] Correlation Analysis for Vehicle Duty
Cycles and Wheel Bearings
Prof. Hyun-Woo Lee, Student. Jung-Yang Park
(Pusan National University, Korea), * Dr. SeJong Oh (RIMT, Korea)
[345] The Study of Timing Belt Dynamic
Behavior & Tracking measurement
* Mr. Euichul Choi, Mr. Daeyoon Oh, Mr.
Wootae Kim (Hyundai Motor Company, Korea),
Mr. Kyungjun Yang (Gates Unitta Korea, Korea)
[117] Fatigue Life Prediction of Automotive
Rubber Component under Random Loading
* Mr. Wansoo Kim, Dr. Hakjoo Kim (Hankook
Tire Co., LTD. R&D Center, Korea), Dr. Hakjoo
Lee, Dr. Wandoo Kim (Korea Institute of
Machinery & Materials, Korea)
[220] Uncontrolled Regeneration
Characteristics of the Diesel
Particulate Filters in the Light Duty
Diesel Engines
* Dr. Hongsuk Kim, Dr. Youngil Jeong,
Mr. Gyubaek Cho, Mr. Dongkil Sin, Mr.
Seunghan Han (Korea Institute of
Machinery and Materials, Korea)
ᶀᶀᶀ
[84] Dynamic Characteristics of Cylinder
Head Gaskets for Diesel Engine by Abrupt
Change of Cooling Water Temperature and
also by Reduction of Tightening Torque of
Cylinder Head Bolts
* Mr. Kodama Tomoaki, Dr. Wakabayshi
Katsuhiko, Mr. Kijima Takashi, Mr. Motayama
Yoshiaki, Mr. Nagaya Takahide (Graduate
School of Kokushikan University, Japan), Mr.
Aizawa Osamu (Marusan Corporation, Japan)
[282] Evaluation of Dynamic Tensile
Characteristics of Polyprophylene with
Temperature Variation
* Student. Jin Sung Kim, Prof. Hoon Huh
(Korea Advanced Institute of Science and
Technology, Korea), Mr. Kang Wook Lee, Mr.
Dae Yul Ha, Mr. Tae Jung Yeo, Mr. Soon Jo
Park (Hyundai MOBIS, Korea)
ᶀᶀᶀ
11
ᵾᵾᵾ
Oral Session II
Oral Session II
ᵄ 16:20~18:20, 22 (Monday) August, 2005
08:30~17:00
10:00~10:30
10:30~12:00
13:30~15:50
15:50~16:20
16:20~18:20
ᵄ 16:20~18:20, 22 (Monday) August, 2005
Registration
Opening Ceremony
Plenary Session I
Oral Session I
Coffee Break
Oral Session II
[ME01] Transmission, Driveline &
Electronic Engine Control
08:30~17:00
10:00~10:30
10:30~12:00
13:30~15:50
15:50~16:20
16:20~18:20
[ME02] SI Engine II
[ME03] PM & NOx Reduction
Registration
Opening Ceremony
Plenary Session I
Oral Session I
Coffee Break
Oral Session II
[ME04] Advanced Brake System II
[ME05] Automotive Electronics
[ME6] Noise & Vibration II
Place : Convention Hall A
Place : Convention Hall B
Place : Convention Hall C
Place : Diamond Hall
Place : Emerald
Place : Ruby
Chair Prof. Si-Youl Jang
(Kookmin University, Korea)
Chair Mr. Kazuma Okuda
(Honda R&D Co., Ltd, Japan)
Chair PProf. Nahmkeon Hur
(Sogang University, Korea)
Chair Prof. Norimasa Iida
(Keio University, Japan)
Chair Prof. Jung-Ho Hwang
(Yonsei University, Korea)
Chair Dr. Daxiang Wang
(Tianjin Engineering Center, China)
Chair Prof. Kunsoo Huh
(Hanyang University, Korea)
Chair Prof. Hisashi Matsushita
(Okayama University of Science, Japan)
Chair Prof. Jung Ha Kim
(Kookmin University, Korea)
Chair Dr. Paljoo Yoon
(Mando Corporation, Korea)
Chair Prof. Byoungduk Lim
(Yeungnam University, Korea)
Chair Prof. Zhong Zhang
(Toyohashi University of Technology, Japan)
[30] ZF 6-speed automatic transmissions:
Contribution to environmental protection
* Mr. Heribert Scherer (ZF Getriebe GMBH,
Germany)
[202] Development of 2.0 Liter Hyundai High
Power Engine
* Dr. Jongbum Park, Dr. Sihun Lee, Dr. BongHoon Han, Dr. Woo Tai Kim (Hyundai Motor
Company, Korea)
[355] Selective Catalytic Reduction of NO in
the Exhaust Using Syngas as Reducing
Agent
* Dr. Heon Jung, Dr. Jung-Il Yang (Korea
Institute of Energy Research, Korea), Dr.
Young-Hoon Song (Korea Institute of
Machinery & Materials, Korea)
[264] Thermoelastic Instability in
Functionally Graded Materials
* Dr. Yong Hoon Jang (Yonsei University,
Korea)
[158] Durability analysis of ground point
voltages in automotive ground system
using the equivalent resistor model
* Mr. XueFeng Jin, Mr. Shiva Ram Krishna,
Prof. Jaehong Park, Mr. Yunbo Sun, Mr. Injoo
Kim (Seoul National University, Korea), Mr.
Soonseock Ok, Mr. Junwan Tak, Mr. Jangdon
Choi, Mr. Jonggu Kim, Mr. Seungjae Lee, Mr.
Hwanggeol Lee, Mr. Hyungmo Kang(Hyundai
Motor Company, Korea)
[284] Torsional Vibration for Crankshaft with
Cooling-Fan Clutch
Mr. Jouji Kimura, * Mr. Takafumi Takao, Mr.
Takafumi Takao, Mr. Takafumi Takao (ISUZU
Motors Limited, Japan)
[57] Research of low tension ISG Belt-drive
System for Idling Stop System
* Mr. Kazuma Okuda, Mr. Yasuyuki Komatsu,
Mr. Shigeru Aoki, Mr. Tadashi Fujiwara, Mr.
Youichi Nakahara (Honda R & DCo.,ltd, Japan)
[85] Improvement of Engine Performance
with Electronically Controlled injection
system in a 4 Stoke Small Engine
* Mr. Seungjin Lee, Dr. Dongsoo Jeong, Prof.
Jeongin Ryu (Chungnam University, Koreaand
Materials, Korea), Mr. Koynam Choi (Korea
Institute of Machinery , Korea)
[107] Realization of the Fast transition time
and Soft-landing for an EM/PM hybrid EMV
Actuator using a Simple PID control
* Student. Sangyong Kwak, Dr. HyeongJoon
Ahn, Student. Jeeuk Chang, Prof. Dongchul
Han (Seoul University, Korea)
[32] Reducing the Amount of Lubricating
Engine Oil by Using a New Crankshaft
Bearing with Eccentric Oil Groove
* Mr. Tatsuhiro Terada (TOYOTA Motor
Corporation, Japan)
[247] Application of CFD in 4 cylinder SI
engine performance development
* Mr. Sooyoul Park (Hyundai Motor Company,
Korea), Dr. Jaein Park (Hyundai Motor
Company, Korea)
[33] Improvement of lean burn combustion
by asymmetric piston speed
* Mr. Shigeki Kinomura (TOYOTA Motor
Corporation, Japan)
[338] Improvement of Fuel Economy and
Power at High Engine Speed by Reducing
Exhaust Gas Temperature in Spark Ignition
Engines
Mr. Jin Kook Kong, * Dr. Nahm Roh Joo, Dr.
Taek Yong Ryu, Dr. Woo Tai Kim (R&D
Division for Hyundai Motor Company, Korea)
[289] Experimental Study on Thermal
Stability of gama-Al2O3 Honeycomb
Ceramic Coatings Improved by BaO
* Dr. Daxiang Wang , Prof. Wulin Wang (China
Automotive Technology & Research Center,
China), Prof. Gengyu Cao (University of
Science and Technology of China, China)
[298] Continuous Soot Regeneration
Technologies of a Catalyzed Particulate
Filter for Diesel Passenger Car
* Mr. Chang Dae Kim (Hyundai Motor
Company, Korea)
[290] Experimental Investigation of Soot
Oxidation Characteristics
Prof. Kwang Min Chun, * Student. HyeongSang Lee (Yonsei University, Korea)
[320] Numerical Study of Front Brake Air
Flow
* Mr. Yong-Woo Park (KIA Motor Company,
Korea)
[118] Numerical Investigation of
Hydroplaning of Vehicle Tire to Rolling
Velocity
* Dr. Hong-Woo Lee, Prof. Jin-Rae Cho, Mr.
Jung-Sam Son (Pusan National University,
Korea), Dr. Jong-Shik Woo (R&D Center of
Kumho Tire Co., Ltd., Korea)
[317] Study on Brake Creep-Groan Noise
with Chassis Dynamometer
* Mr. MinGyu Han, Mr. SungSun Cho, Mr.
ChoonKi Park, Mr. KyuWon Yoon (Mando
Corporation, Korea)
[257] Development of Real-Time Test &
Analysis System Based on Four Wheels
Automobile Braking Test Bed
* Dr. Renyun Sun , Dr. Jianyu Cai , Dr. Shuang
Zhao , Dr. Xingxian Long , Dr. Wei Huang
(School of Transportation & Automotive
Engineering, XiHua University, China)
[25] Magnetic Field Calculation and Dynamic
Behavior Analysis of the Magnetic Actuator
Break System (MABS) for Emergency in a
Car
* Student. Jong-ho Kang, Student. Dong-kyu
Shin, Prof. Hyun-kyo Jung (Seoul National
University, Korea)
[181] A Study on improvement of misfire
detection algorithm using post-oscillation
with the weight factor
Mr. Jihoon Lim, Mr. Ealgoo Kim, Prof. Jaehong
Park, * Mr. Taeyeon Lee (Seoul National
University, Korea)
[61] Development of a Personal Fuel
Economy Meter using OBD II
* Mr. Shigeki Tezuka, Mr. Kazuo Takahashi
(Niigata College of Technology, Japan)
[301] Development of a Programmable
Driver for Solenoid-type 2-way-valve
Common-rail Injectors
Prof. Myoungho Sunwoo, Dr. Kangyoon Lee, *
Student. Byounggul Oh (Hanyang University,
Korea)
[134] Study and Analysis on the affect of
different operating conditions on
automotive ground voltages
* Student. Shiva Ram Krishna, Student.
Xuefeng Jin, Student. Injoo Kim, Student.
Yunbo Sun, Student. Ealgoo Kim, Prof.
Jaehong Park (Seoul National University,
Korea), Mr. Soonseock Ok, Mr. Junwan Tak,
Mr. Jangdon Choi, Mr. Jonggu Kim, Mr.
Seungjae Lee (Hyundai Motor Company.,
Korea)
ᶀᶀᶀ
12
ᵾᵾᵾ
ᶀᶀᶀ
13
ᵾᵾᵾ
[190] Study of Brake Moan Phenomena in
the torsion beam rear suspension system
* Mr. Kwangho Lee, Mr. Youngsun Son (Senior
Research Engineer Chassis Engineering
Team3 R&D Division for Hyundai & Kia Motor
Company, Korea), Mr. Seongtae Heo
(Research Engineer Functional system test
team3 Kia Motor Company, Korea)
[66] Generation of Engine Sound by Voice
Interpolation Algorithm
Student. Takafumi Ooba, Prof. Satoshi
Horihata, * Prof. Zhong Zhang, Prof. Tetuo
Miyake (Toyohashi University of Technology,
Japan)
[213] Noise source identification of a
cranking motor using DOE ; A case study
* Mr. Soonsik Park (Valeo , Korea), Prof.
Byoungduk Lim (Yeungnam University, Korea)
[77] A Study on Vibration Characteristics of
a Small Engine Fuel Injection Pump
considering a Cylinder Block
* Dr. Yasuhiro Honda, Mr. Tomoaki Kodama,
Dr. Katsuhiko Wakabayashi, Mr. Ryoji Kihara
(Kokushikan University, Japan)
Oral Session III
Oral Session III
ᵄ 08:10~10:30, 23 (Tuesday) August, 2005
08:10~10:30
10:30~11:00
11:00~12:00
13:30~15:50
15:50~16:20
16:20~18:20
19:00~21:00
ᵄ 08:10~10:30, 23 (Tuesday) August, 2005
Oral Session III
Coffee Break
Plenary Session II
Oral Session IV
Coffee Break
Poster Session
Conference Banquet
[TA01] CI Engine I
08:10~10:30
10:30~11:00
11:00~12:00
13:30~15:50
15:50~16:20
16:20~18:20
19:00~21:00
[TA02] Alternative
Powerplants I
[TA03] Emission
[TA04] Vehicle Dynamics &
Simulation I
Oral Session III
Coffee Break
Plenary Session II
Oral Session IV
Coffee Break
Poster Session
Conference Banquet
[TA05] Embedded System
[TA06] Reliability & Robust Design I
[TA07] Standards & Regulations
Place : Convention Hall A
Place : Convention Hall B
Place : Convention Hall C
Place : Diamond Hall
Place : Emerald
Place : Ruby
Place : Sapphire
Chair Dr. Chang Ryul Choi
(Hyundai Motor Company, Korea)
Chair Prof. Norimasa Iida
(Keio University, Japan)
Chair Prof. Daeyup Lee
(Inha University, Korea)
Chair Mr. Shuichi Kajitani
(Ibaraki University, Japan)
Chair Prof. Byungchul Choi
(Chonnam Natational University, Korea)
Chair Dr. Seongho Kim
(Hankook Tire, Korea)
Chair Prof. Bongchoon Jang
(Andong National University, Korea)
Chair Dr. Guang yu Lin
(Chang'an University, China)
Chair Dr. Wan-Sul Lee
(Hyundai Motor Company, Korea)
Chair Mr. Tsuneaki Kaneko
(Nihon University, Japan)
Chair Prof. Hoon Huh
(Korea Advanced Institute of Science and Technology, Korea)
Chair Dr. Jianwei Zhang
(Tianjin University, China)
[31] In-cylinder flow analysis using
wavelet method
* Mr. Deokkyu Park, Prof. Pierre E.
Sullivan, Prof. James S. Wallace
(University of Toronto, Canada)
[177] Experimental Investigation on
the THC Reduction in Liquid Phase
LPG injection (LPLi) Engine with
Recirculation System using Canister
Mr. Hyungmin Lee, Student. Seongwon
Choi, Mr. Hochul Kwak, * Prof. Cha-Lee
Myung, Prof. Simsoo Park (Korea
University, Korea)
[154] Investigation of PZEV catalyst
configuration
* Mr. Youngwoong Kim, Mr. Daejoong
Kim (GM Daewoo Auto & Technology,
Korea)
[114] A Study of Vehicle Parameters
Sensitivity of Sports Utility Vehicle
Rollover
* Mr. Ram Prabhu M , Mr. Andres
Nelson, Prof. Bongchoon Jang
(Graduate School, Dept. of Mechanical
Engineering,
Andong
National
University, Korea)
[187] Development of Electronic Control
Unit Platform
* Student. Seung Hun Jin, Student. Sang-won
Lee, Student. Gi Oh Kim, Prof. Sung Ho
Hwang, Prof. Hyun Soo Kim, Prof. Jae Wook
Jeon (Sungkyunkwan Univerity, Korea)
[65] A Method of Fatigue Life Prediction for
Spot Welded Structure
* Dr. Akifumi Okabe (Nihon University, Japan)
[69] Development of an automated design
system of gerotor gearing in lubricating oil
pumps by optimal design and simulation
* Prof. Chul Kim (Pusan National University,
Korea)
[39] Experimental Study on Premixed
Charge Compression Ignition (PCCI)
Engine with Direct Fuel Injection
Impingement and Distribution (OSKA)
System
* Dr. Satoshi KATO, Mr. Takashi FUJITA
(Kanazawa Institute of Technology,
Japan)
[71] Numerical and experimental
analysis of unsteady cavitating nozzle
flow and diesel spray characteristics
in a high-pressure piezo-driven
injector
* Mr. Jinwook Lee, Prof. Kyoungdoug
Min (Seoul National University, Korea),
Dr. Kernyong Kang (Korea Institute of
Machinery and Materials, Korea), Dr.
Manolis Gavaises, Prof. Dinos
Arcoumanis (City University, United
Kingdom)
[151] The Effect of Biodiesel Fuel
from Physic Nut (Jatropha Curcas) on
an Direct Injection (DI) Diesel Engine
* Dr. Iman K. Reksowardojo, Mr. R.P.
Buddy Kusuma, Mr. I. Made Mahendra,
Dr. Tirto P. Brodjonegoro, Dr. Tatang H.
Soerawidjaja, Mr. Ibrahim Syaharuddin,
Prof. Wiranto Arismunandar (Institut
Teknologi Bandung , Indonesia)
[41] Combined Effects of Fuel
Injection Timing and Hot EGR on
Ignition, Combustion and Thermal
Efficiency in a Small DI Alcohol
Engine
* Student. Kouji Uchida (Sojo University,
Japan)
[42] Numerical Study on Dimethyl
Ether as an Ignition Improver for
Natural Gas dual fuel Engines
Dr. Mohamed Hassan Morsy (Suez
Canal University, Egypt), * Prof. Suk Ho
Chung (Seoul National University,
Korea)
[165] A Study on the Effect of the Fuel
Supply Conditions on Combustion in
a DI CNG Engine
* Student. Jeongho Kang, Dr. Jinyoung
Kim, Dr. Jeongkuk Yeom, Prof. Sungsik
Chung , Prof. Jongyul Ha (Donga
University, Korea)
[356] Enhancement of volumetric
efficiency in a gaseous LPG injection
engine
* Prof. Daeyup Lee, Student. Seunghwan
Cho, Student. Seil Ko, Student. Seongho
Maeng, Student. Jiho Choi (INha
University, Korea)
[88] Improvement of thermal
efficiency in natural gas fueled engine
by applying Miller cycle
* Mr. Min Ho Lee , Mr. Duckwhan Kim
(Ulsan Industry Promotion Techno Park
Foundation, Korea), Dr. Kyo Nam Choi,
Dr. Dong Soo Jeong (Kimm, Korea),
Prof. Kyung Ok Cha (Myong-ji
University, Korea)
ᶀᶀᶀ
14
[120] Idle Performance of an SI
Engine with Variations in Engine
Control Parameters
* Mr. Duk-Sang Kim, Mr. Young-Joon
Park, Prof. Yong-Seok Cho (Kookmin
University, Korea)
[45] Research on Ultra Low Emission
Technology for Large Displacement
Motorcycles
* Mr. Tomoya Kono, Mr. Hiroaki Miyata,
Mr. Mamoru Uraki, Mr. Ryutaro
Yamazaki (Honda R&D Co., Ltd. Asaka
R&D Center, Japan)
[145] A Study on the change of the
Fuel Composition during Diurnal Test
Mr. Jongyeol Hong , Mr. Kyungju Jeon ,
* Mr. Chonghyeon Cheong ( GM
Daewoo Auto & Technology Co., Korea)
[178] CFD Analysis on Exhaust Flow
Analysis with Various Exhaust
Manifolds and Catalyst Geometries
Mr. Jae-Ho Lee, Mr. Daewoo Kim, * Mr.
Hochul Kwak, Prof. Simsoo Park (Korea
University, Korea)
[252] Research on Preparation and
Application of Metal Honeycomb
Catalysts to Ultra-low Emission Twowheel Motorcycle
* Dr. Daxiang Wang, Prof. Qunshan Xue
, Mr. Shujie Pan (Tianjin Engineering
Center for Catalytic Purification of
Vehicle Exhaust, China), Dr. Wulin
Wang (China Automotive Research And
Technology Center, China)
ᵾᵾᵾ
[75] The automotive suspension design and
analysis considering uncertainties
* Dr. Byung-Lyul Choi (FRAMAX Co. Ltd.,
Korea), Dr. Dong-Hoon Choi (iDOT, Korea)
[63] Comparison of Ride Comforts via
Experiment and Computer Simulation
* Prof. Wan-Suk Yoo, Mr. Dong-Woon
Park, Mr. Min-Seok Kim (Pusan National
University, Korea)
[214] An integrated development
environment from modeling to
implementation for automotive real-time
embedded control systems
Prof. Myoungho Sunwoo, Student. Minsuk
Shin, * Student. Jooyoung Ma (Hanyang
University, Korea)
[116] The Development of the Variable
Rack Stroke(VRS) System
* Mr. Hyun Sung, Mr. Yong Seob Lim,
Mr. Soo Bo Park, Dr. Un Koo Lee
(Hyundai Motor Company, Korea)
[260] Study of Embedded System about Onboard Information Image
Dr. Guang yu Lin , Dr. Lang Wei , * Dr. Tao
Chen (School of Automobile, Chang'an
University, China)
[361] Reverse Engineering in Automotive
Component Industry; Collaboration between
University and Industry
* Prof. Indra Nurhadi, Dr. Andi Isra Mahyuddin
(Member of IATO-SAE Indonesia, Indonesia)
[67] Study of Harshness Noise
Reduction Technique
* Mr. Tarou Yamashita (Honda R&D
Co.,Ltd. Tochigi R&D Center, Japan)
[276] Software Architecture for Model Based
Automotive System Development and Its
Application
* Mr. Joon-woo Son, Dr. Suk Lee (Pusan
National University, Korea), Mr. Ivan Wilson
(DsysD Ltd., United Kingdom), Dr. Wootaik Lee
(Changwon National University, Korea)
[146] Development of the plasma coated
engine valve cap for diesel engine
* Dr. In-Woong Lyo, Mr. Seung-Gyun Ahn, Mr.
Jung-Seok Oh, Mr. Jong-Dae Lim (Hyundai
Motor Company, Korea)
[74] Magnetorheological Fluid
Technology for Vehicle Applications
* Mr. Shigeru Shutto (Lord Far East, Inc.,
Japan), Mr. James R. Toscano (Lord
Corporation, United States)
[129] A Comprehensive Tire Model
with Two-dimensional Contact Patch
* Dr. Seongho Kim, Dr. Gwanghun Gim
(Hankook Tire Co., Ltd., Korea), Prof.
P.E. Nikravesh (University of Arizona,
United States)
[132] The development of Roll
Stability Assist system for the new
heavy- duty vehicle
* Mr. Susumu Otsuki (Hino Motors, Ltd.,
Japan)
[333] Model Based Development in
Automotive Embedded Systems
* Mr. Won Hyun O, Mr. Jung Hee Lee, Mr.
Hyoung Geun Kwon, Dr. Hyoung Jin Yoon
(Hyundai Motor, Korea)
[292] Development of the OBD Test
Automation using HILS
* Dr. Seunghyun Park, Dr. Jongsoo Lee, Mr.
Youngjin Kim, Mr. Seungwook Yang (Hyundai
Motor Company, Korea)
[123] Reliability based topology optimization
of rubber engine mount
* Dr. Wan-Sul Lee (Hyundai Motor Company,
Korea),
Prof. Sung-Kie Youn (KAIST, Korea)
[174] Implementation of a sychronious
automated assembly system for spare tire
* Prof. Hong-Seok Park, Student. Sung-Bum
Park (University of Ulsan, Korea), Mr. SangMin Moon, Mr. Chang-Woo Lee (Hyundai Motor
Co., Korea), Dr. Gyu-Bong Lee (KITECH,
Korea)
[185] Shape Optimization of a Lock-up
Clutch and Damper Springs for a Thin
Torque Converter using B-spline and Finite
Element Mesh Smoothing
* Dr. Cheol Kim, Student. Jiwon Yoon
(Kyungpook National University, Korea)
[311] Fault Tolerant Protocol for CAN Flash
Programming
* Mr. Ho Gi Jung, Mr. Jea Young Hwang, Dr.
Pal Joo Yoon (Mando Corporation, Advanced
Electronics Team, Korea), Prof. Jai Hie Kim
(Yonsei University, Dept. of Electrical and
Electronic Engineering, Korea)
ᶀᶀᶀ
15
ᵾᵾᵾ
[148] Theoretical and Numerical Study on
the Characteristics of Gas in a Swirl Injector
Prof. Yong Kweon Suh (Dong-A Univrisity,
Korea), * Mr. Hyeung Seok Heo (Dong-A
University, Korea)
[211] Optimum Design Scheme of Receiver
Dryer in Automotive Air-Conditioning
System using HFC-134a Refrigerant
* Prof. Kyung Hoon Kim (Kyung Hee University,
Korea), Dr. Seok Woo Kim (K.I.E.R, Korea)
[270] A Design of the Block Type Expansion
Valve in Automotive Air Conditioning
System using HFC-134a Refrigerant
* Prof. Kyung Hoon Kim (Kyung Hee University,
Korea),
Dr. Woo Seok Kim (K.I.E.R, Korea)
Oral Session IV
Oral Session IV
ᵄ 13:30~15:50, 23 (Tuesday) August, 2005
08:10~10:30
10:30~11:00
11:00~12:00
13:30~15:50
15:50~16:20
16:20~18:20
19:00~21:00
ᵄ 13:30~15:50, 23 (Tuesday) August, 2005
Oral Session III
Coffee Break
Plenary Session II
Oral Session IV
Coffee Break
Poster Session
Conference Banquet
[TP01] CI Engine II
08:10~10:30
10:30~11:00
11:00~12:00
13:30~15:50
15:50~16:20
16:20~18:20
19:00~21:00
[TP02] Alternative Powerplants II
[TP03] PM Measurement
Oral Session III
Coffee Break
Plenary Session II
Oral Session IV
Coffee Break
Poster Session
Conference Banquet
[TP04] Vehicle Dynamics &
Simulation II
[TP05] ITS, Telematics & IVN
[TP07] Structural Crashworthiness
Place : Convention Halll A
Place : Convention Hall B
Place : Convention Hall C
Place : Diamond
Place : Emerald
Place : Sapphire
Chair Prof. Kang Yul Hur
(Pohang University of Science and Technology, Korea)
Chair Dr. Iman K. Reksowardojo
(Institut Teknologi Bandung, Indonesia)
Chair Dr. Dongsoo Jeong
(KIMM, Korea)
Chair Dr. Yoshio Sato
(National Traffic Safety and Environment Laboratory, Japan)
Chair Dr. Gwi-Nam Bae
(Korea Institute of Science and Technology, Korea)
Chair Dr. Jan Czerwinski
(University of Applied Sciences Biel-Bienne, Switzerland)
Chair Prof. Wan Suk Yoo
(Pusan National University, Korea)
Chair Dr. Pongsathorn Raksincharoensak
(Tokyo University of Agriculture and Technology, Japan)
Chair Prof. Kyongsu Yi
(Hanyang University, Korea)
Chair Dr. Kazumoto Morita
(National Traffic Safety and Environment Laboratory, Japan)
Chair Prof. Jaeung Cho
( Kongju National University, Korea)
Chair Prof. Hiroyuki Hamada
(Kyoto Institute of Technology, Japan)
[203] Macroscopic behaviors of DME spray
in combustion chamber injected from
common-rail injection system
Prof. Chang Sik Lee, Mr. Sung Wook Park, *
Mr. Hyun Kyu Suh, Mr. Ji Hong Park (Hanyang
University, Korea)
[362] The concept and experimental results
of low compression DME engines operated
at stoichiometric working gas
* Mr. Shuichi Kajitani, Mr. Masayuki Takeda,
Mr. Atushi Hoshiyama (Faculty of Engineering,
Ibaraki University, Japan)
[10] Influencing (Nano)Particle Emissions of
2-Stroke Scooters
* Dr. Jan Czerwinski (University of Applied
Sciences Biel-Bienne, CH, Switzerland), Mr.
Felix Reutimann (BUWAL, Switzerland), Mr.
Andreas Mayer (TTM, Switzerland)
[206] Combined Vehicle State and Road
Bank Angle Estimators for Driver
Assistance Systems
Dr. Jaekwan Lee, Dr. Ilki Moon, Mr. Byoungsoo
Kim (Hyundai Mobis, Korea), Dr. Taeyoung
Chung, * Prof. Kyongsu Yi (Hanyang Universiry,
Korea)
[38] 3D Vision System for the Recognition of
Free Parking Site Location
* Mr. Ho Gi Jung , Mr. Dong Suk Kim, Dr. Pal
Joo Yoon (Mando Corporation, Advanced
Electronics Team, Korea), Prof. Jai Hie Kim
(Yonsei University, Dept. of Electrical and
Electronic Engineering, Korea)
[27] Relation between J- Integral and CMOD
in Dynamic Behavior of 3- Point Bend
Specimen
Prof. Moonsik Han (Keimyung University,
Korea), * Prof. Jaeung Cho (Faculty of
Mechanical and Automotive Enginnering,
Kongju National University, Korea)
[329] Application and initial test results of
1800bar Piezo injector system for 2.0L
diesel engine to improve emission and
performance
* Dr. Chang Ryul Choi, Mr. Joong Hoon Kang,
Mr. Soon hyuk Kwon, Mr. Chang il Kim
(Hyundai Motor, Korea)
[58] Development of heavy-duty DME truck
in EFV21 project -Development and
research of DME engine and the vehicle* Mr. Takayuki Tsuchiya (Nissan Diesel Motor
Co., Ltd., Japan), Dr. Yoshio Sato (National
Traffic Safety and Environment Laboratory,
Japan)
[293] Evaluation of R&H characteristics
using Virtual DRA
* Mr. Donggeun Lee, Mr. Hosun Hwang, Mr.
Kitae Kim, Dr. Junghwan Lim (Hyundai Motor
Company, Korea)
[86] Simulation Study for an Autonomous
Driving System Using DGPS RTK
* Dr. Jae-Yong Um, Mr. Sung-Bo Sim, Mr. InSik Lee (R&D Division for Hyundai Motor
Company, Korea)
[348] The Influence of the Mixing Ratio of
Double Componential Fuels on HCCI
Combustion
* Mr. Susumu Sato, Mr. Soonpyo Kweon, Mr.
Daisuke Yamashita (Graduate School of
Science & Technology, Keio University, Japan),
Mr. Norimasa Iida (Faculty of Science &
Technology, Keio University, Japan)
[183] Development of heavy-duty DME truck
in EFV21 project -Development and
research of NOx storage reduction system
for DME engine* Dr. Yoshio Sato (National Traffic Safety and
Environment Laboratory, Japan), Dr. Seang
Wock Lee (Kookmin University, Korea), Mr.
Takayuki Tsuchiya (Nissan Diesel Motor Co.,
Ltd, Japan)
[310] Soot Primary Particle Size
Measurement using Time-Resolved Laser
Induced Incandescence in Laminar Ethylene
Diffusion Flame
* Mr. Gyu bo Kim, Mr. Jong ho Lee, Dr. Young
june Chang, Dr. Chung hwan Jeon (Pusan
national University, Korea), Dr. Dong soo
Jeong (Korea Institute of Machinery &
Materials, Korea)
[302] Sensitivity Analysis of Commercial
Vehicle Parameters on Dynamic Rollover
* Mr. Yongil Kim, Dr. Junghwan Lim (Hyundai
Motor Company, Korea)
[163] Development Of An Obstacle
Detection System Using Stereo Vision
Sensors
Mr. Jaehark Park (LG Electronics, Korea),
Student. Daegun Hong, * Prof. Kunsoo Huh
(Hanyang University, Korea)
[262] Comparative Crashworthiness
assessment of ULSAB-AVC model with
Advance High Strength Steel and
Conventional steel
* Student. JongHeon Yoon, Prof. hoon Huh
(Korea Advanced Institute of Science and
Technology, Korea), Prof. SeHo Kim (Daegu
University, Korea), Dr. HongGee Kim, Dr.
SeungHo Park (POSCO Technical Research
Laboratories, Korea)
[360] An Adjoint Method for Controlled
Cavitation Inverse Nozzle Design
Dr. Manolis Gavaises, * Ms. Stamatina Petropo
(School of Engineering and Mathematical
Sciences, City University London, United
Kingdom), Dr. Andreas Theodorak (Fluid
Research Co, Greece)
[363] Biodiesel Fuel from Refined Bleach
Deodorized Palm Oil (RBDPO) on an Direct
Injection (DI) Diesel Engine for Electric
Generator and Vehicles
* Dr. Iman K. Reksowardojo, Mr. S.
Shofwatuzaki (Institut Ieknologi Bandung,
Indonesia), Dr. D. Darnoko (Indonesian Oil
Palm Research Institute, Indonesia), Dr. Tirto
P. Brodjonegor, Dr. Tatang H. Soerawidja, Mr.
Ibrahim Syaharuddin, Prof. Wiranto
Arismunandar (Institut Teknologi Bandung,
Indonesia)
[90] A Study of Ignition Timing Control in an
HCCI Engine -- Effects of Compression
Ratio Changes and Methane AdditiveMr. Kazunori Yoshida (Daiwa Seiko, Inc.,
Japan), * Student. Takuya Muto (Graduate
School of Science and Technology, Nihon
University, Japan), Prof. Hideo Shoji (College
of Science and Technology, Nihon University
Japan)
[323] Performance Evaluation of a Diffusion
Charger For Real-time Measurement of the
Submicron Aerosol Mean Diameter
Student. Ding-Ho Park, Prof. Jung-Ho Hwang, *
Student. Min-Ha An (School of mechanical
engineering, Yonsei University, Korea)
[322] Real-time Measurements of Size
Distribution of Diesel Exhaust Particles
Using Portable 3-Stage Electrical Low
Pressure Impactor (P-ELI)
Prof. Jung-Ho Hwang, * Student. Dong-Ho
Park, Student. Min-Ha An, Prof. Kwang-Min
Chun (School of mechanical engineering,
Yonsei University, Korea)
[337] A Study on the Enhancement of
Vehicle Stability by Active Geometry Control
Suspension (AGCS) System
* Dr. Sangho Lee, Dr. Unkoo Lee (Hyundai
Motor Company, Korea)
[36] Analysis of accidents by older drivers in
Japan
* Dr. Kazumoto Morita, Dr. Michiaki Sekine
(National Traffic Safety and Environment
Laboratory, Japan)
[208] Design and Evaluation of Intelligent
Vehicle Cruise Control Systems using a
Vehicle Simulator
Dr. Jaekwan Lee, Dr. Ilki Moon, Mr. Byoungsoo
Kim (Hyundai Mobis, Korea), Student.
Donghoon Han, * Prof. Kyongsu Yi (Hanyang
University, Korea)
[255] ECU Calibration and the Calibration
Protocol On a Fuel Cell Vehicle
* Student. Shengyan Ding (CDHK (ChinesischDeutsches Hochschule Kolleg), Tongji
University, China), Dr. Feng Luo , Prof.
Zechang Sun (College of Automotive
Engineering, Tongji University, China)
16
ᵾᵾᵾ
[263] Accurate Finite Element Modeling of
Spot Welded Region for Crash Analysis
* Student. Junghan Song, Prof. Hoon Huh
(KAIST, Korea), Dr. Honggee Kim, Dr. Sungho
Park (POSCO, Korea)
[281] Optimum Design of a Center-pillar
Model with Simplified Side Impact Analysis
* Ms. Gihyun Bae (Korea Advanced Institute of
Science and Technology, Korea)
[291] A collapse trigger mechanism for
progressive crushing of FRP
Student. Yuqiu Yang, Dr. Asami Nakai, * Prof.
Hiroyuki Hamada (Kyoto Institute of
Technology, Japan), Mr. Tadashi Uozumi
(Murata machinery,LTD, Japan)
[46] Development of Numerical Simulation
Method using Meshfree Method and
Application to Flow around Automobile
* Mr. Kazuhiro Sato (Fuji Heavy Industries Ltd.,
Japan), Mr. Hiroshi Shimoyama (Subaru
Tecnica International Inc., Japan)
[358] Optimization of piston cavity in a DME
engine
* Prof. Daeyup Lee, Student. Seunghwan Cho,
Student. Beomho Lee, Student. Seongho
Maeng, Student. Jiho Choi (Inha University,
Korea)
ᶀᶀᶀ
[126] A Study of Deformation Behavior of
Front End Module for prevention of crack on
Carrier under 5mph impact simulation
* Mr. Do Hyeun Park, Mr. Bum Suk Roh, Dr.
Soon Jo Park (Department of Applied
Technology, Technical Research Institute,
Hyundai MOBIS, Korea), Mr. Young Ho Lee
(Department of Trim module R&D, Technical
Research Institute, Hyundai MOBIS, Korea)
ᶀᶀᶀ
17
ᵾᵾᵾ
Oral Session V
Oral Session V
ᵄ 08:10~10:30, 24 (Wednesday) August, 2005
08:10~10:30
10:30~11:30
11:30~12:30
12:30~13:30
ᵄ 08:10~10:30, 24 (Wednesday) August, 2005
Oral Session V
Coffee Break
Closing Ceremony
Farewell Lunch
[WA01] HEV & FCHEV
08:10~10:30
10:30~11:30
11:30~12:30
12:30~13:30
[WA02] Environment
[WA03] Emission & Regulation
[WA04] Advanced Steering
System
Oral Session V
Coffee Break
Closing Ceremony
Farewell Lunch
[WA05] Advanced Suspension System [WA06] Reliability & Robust Design II
[WA07] Lightweight Materials,
Interiors & Recycling
Place : Convention Hall A
Place : Convention Hall B
Place : Convention Hall C
Place : Diamond Hall
Place : Emerald
Place : Ruby
Place : Sapphire
Chair Prof. Hyunsoo Kim
(Sungkyunkwan University, Korea)
Chair Prof. Hyun-sik Ahn
(Kookmin University, Korea)
Chair Dr. Geon -Seog Son
(Neophotech Inc., Korea)
Chair Prof. Seang Wock Lee (Kookmin University, Korea)
Chair Dr. Daxiang Wang
(Tianjin Engineering Center for Catalytic
Purification of Vehicle Exhaust, China)
Chair Prof. KunSoo Huh
(Hanyang University, Korea)
Chair Dr. Tao Chen
(Chang'an University, Korea)
Chair Dr. Yinong Li
(Chongqing University, Korea)
Chair DProf. Hui Chen
(Tongji University, China)
Chair Dr. Hongwook Lee
(Hyundai Motor Company, Korea)
Chair Prof. Seung Jin Heo
(Koomin University, Korea)
Chair Prof. Boyoung Hur
(Gyeongsang National University, Korea)
[34] Development of ACCORD Hybrid
System
* Mr. Koichiro Takemasa, Mr. Masaaki
Kaizuka, Mr. Toshitaka Imai, Mr.
Susumu Ishikawa, Mr. Satoshi
Watanabe, Mr. Shinji Yasuno (Honda
R&D Co.,Ltd, Japan)
[299] Study on the reduction of fuel
consumption in the A/C system which
used variable displacement
swashplate compressor
* Mr. Sekil Park, Mr. Byungjun Lee, Mr.
Jinbok Kim (Hyundai Motor Company,
Korea), Mr. Haksoo Kim, Mr. Hewnam
Ahn (Halla Climate Control Company,
Korea)
[22] Study on Improvement of Korean
Motor Vehicle Inspection and
Maintenance Program
* Mr. Taewoo Lee, Dr. Jungho Ryu, Dr.
Myoungdo Eom (National Institute of
Environmental Research, Korea)
[17] ECU Developement for Steer-ByWire
* Mr. Dokun Kim, Mr. Juhnsub Whang
(Hyundai MOBIS, Korea)
[336] The Development of Rear Multi-Link
Suspension with Dual Upper Arm
* Mr. Byung Joo Chung, Mr. Young Wook Park
(Hyundai Motor Company, Korea), Mr. Soon
Huh (Kia Motor Company, Korea)
[354] Development of new navigation
system used for structural analysis
* Mr. Morio Nanbu, Mr. Fuyuki Oshio (CAE
Group Advanced Development Dept.Test &
Experiment Div.Daihatsu Motor Co., LTD.,
Japan)
[87] The Study on Compression properties
of Lightweight Auto Bumper and Beam by
using Aluminum foam
Dr. Yong-Moon Ryu (KATECH, Korea), Dr.
Yong-Moon Lee (Sungwoo High Tech, Korea),
* Prof. Bo-Young Hur (Gyeongsang National
University, Korea)
[231] Study on Substitution Test
Methods of Exhaust Pollutants of
Heavy-duty Hybrid Electric Vehicles
* Mr. Yuntang He, Mr. Ruiqing Chen, Dr.
Zhixin Wu (China Automotive
Technology and Research Center,
China)
[303] Vehicle Stability Control using
ADAMS/Car Co-Simulation for a 4WD
Hybrid Electric Vehicle
* Student. Donghyun Kim, Prof. Hyunsoo
Kim,
Prof.
Sungho
Hwang
(Sungkyunkwan University, Korea), Dr.
Talchol Kim (Senior engineer, Hybrid EV
Team, Hyundai Motor Company, Korea),
Dr. Chulsoo Kim (General manager,
Hybrid EV Team, Hyundai Motor
Company, Korea)
[49] PEMFC operation with MeOH
reforming process
*Prof. Yong-Gun Shul, Dr. Hyun-Jong
Kim, Student. Jong-Man Park, Prof.
Haksoo Han (Yonsei University, Korea),
Prof. Hasuck Kim (Seoul National
University, Korea), Prof. Dong Hyun Kim
(Kyungpook National University, Korea),
Dr. Seung-Eul Yoo (Environmental
materials engineering lab., Korea
Automotive Technology Institute, Korea)
[125] Effects of thermal conditions
include
* ng coolant passage on the
performance of PEMFC
Mr. Mi-Ro Kim, Mr. Byung-Jae Ahn
(Hyundai MOBIS, Korea)
[309] Improvement of Fuel Economy
Using Fuzzy Logic-Based Power
Distribution Control Strategy for a
FCHEV
Student. Nam-Su Lee, Student. Bong-Ju
Ahn, Prof. Gu-Min Jeong, * Prof. HyunSik Ahn, Prof. Do-Hyun Kim (Kookmin
University, Korea)
[15] Comparative Evaluation of
Engine Room Cooling Performance
with 1D network flow and 3D CFD
model
* Dr. Junghwan Lim, Mr. Kee-Young
Yang, Mr. Min-Ho Kim (Hyundai Motor
Company, Korea)
[278] Identification of chemical
substances generated from vehicle's
cabin and attenuation of chemical
substances' concentration by
ventilation
* Mr. Kouichi Tatsu (Isuzu Advanced
Engineering Center, Ltd., Japan), Dr.
Kazuhiko Matsunaga (Isuzu Motors
Limited, Japan), Dr. Shinichi Tanabe
(Waseda University, Japan)
[307] Numerical analysis of vehicle
warm-up performance and transient
passenger thermal comfort by
coupling airflow and heat transfer
Prof. J R Yates, Dr. S B M Beck
(University of Sheffield, United
Kingdom), Mr. J M Park (CMS Tech.
Ltd. , Korea), * Mr. H R Shim (HMC,
Korea)
[233] Research of the Kinematics
Level of Driving Cycle
* Prof. Mengliang Li, Dr. Fuxing Zhang ,
Dr. Xichan Zhu (China Automotive
Technology & Research Center, China),
Dr. Weigao Qiao (Wuhan University of
Technology, China)
[51] Accelerated Aging Using FOCAS
(r) - A Burner Based System
Simulating an Engine
Mr. Bruce Bykowski, Ms. Cynthia Webb,
* Dr. Gordon Bartley, Dr. Reggie Zhan,
Mr. Robert Burrahm (Southwest
Research Institute, United States)
[308] The Influence of Operation
Patterns of Light-duty Freight
Vehicles on NOx Pollution at Local
Roadsides
* Mr. Akira Saito, Mr. Shigeru Ueki, Mr.
Yutaka Takada (Organization for the
promotion of low emission vehicles
(LEVO), Japan)
[316] Dynamic Steering Ratio and its
Influence on Vehicle Control
* Mr. Heathershaw Andrew (Bishop
Innovation Limited, Australia)
[37] The development of the
Independent-type Steer-By-Wire
system using HILS (Second Report)
* Dr. HeeYoung Jo, Dr. UnKoo Lee, Mr.
MinSeok Kam (Hyundai Motor
Company, Korea)
[94] Development of Active Front
Steering System
* Mr. SeongJoo Kim, Mr. SungJune
Chung, Mr. Byunghak Kwak, Mr. Jaegoo
Kim (Mando Corporation, Korea)
[313] Design of Steer-by-Wire Control
Based on Vehicle Dynamics Control
Theory
* Dr. Pongsathorn Raksincharoensak,
Mr. Shunsuke Watanabe, Mr. Masaya
Yamada, Prof. Masao Nagai (Tokyo
University of Agriculture and
Technology, Japan)
[48] Simultaneous optimum design for the
structural and control systems of the
pneumatic servo type active suspension
* Prof. Hisashi Matsushita (Okayama University
of Science, Japan)
[326] Durability analysis for front
suspension strut considering dynamic
loading
* Mr. Hyun-Jun Soh, Mr. Min-Soo Doo (Mando
Corporation, Korea), Mr. Myung-Gyu Kim, Mr.
Ja-Sang Song (Seomoon Technologies, Inc.,
Korea)
[300] Fatigue Fracture Analysis of Stopper
Pins in an Automotive Clutch Disk under
Unbalance Rotation
* Mr. Heungshik Lee, Prof. Chongdu Cho, Mr.
Myoung-Gu Kim, Mr. Changhao Piao (Inha
University, China), Mr. Goong-Chul Nam
(Seojin Clutch Corporation, Korea), Mr. Bonghak Choi (KITECH, Korea)
[104] Fatigue life prediction of engine front
cover in pre-proto development phase
* Mr. Heonhee Kim, Dr. Seongho Yoon (GM
Daewoo Auto & Technology Co., Korea)
[319] An Investigation of Stiffness Effects on
Gear Durability in the Manual Transmission
* Dr. Chaehong Lim, Mr. Heungkyu Lee
(Hyundai Motor Company, Korea)
[288] CO2 Laser Remote Welding
Applications to Automotive Body Joining
and Assembly
* Dr. Yongjoon Cho, Mr. Heegyu Park, Dr.
Heuibom Lee (Hyundai Motor Company, Korea)
[250] Study on Fault Diagnosis
System for Vehicular TWC
* Dr. Chong Chen , Ms. Lan Tang, Mr.
Shaojun Shui, Mr. Wanying Wang, Mr.
Zheming
Cheng
(School
of
Transportation and Automobile
Engineering, Xihua University, China)
[167] Effect of diesel exhaust on the
photochemical reaction of ambient air
using twin smog chambers
* Mr. Seung-Bok Lee, Dr. Gwi-Nam Bae,
Dr. Kil-Choo Moon (Korea Institute of
Science and Technology, Korea)
18
ᵾᵾᵾ
[156] Improvement of fatigue life in postweld cold worked aluminum resistant spot
welds
Prof. Dae-Wook Kim, Student. David Blake
(Washington State University, United States), *
Student. Seungjin Ryu, Prof. Byeongsoo Lim
(Sungkyunkwan University, Korea)
[20] The Optimal Design for Vehicle Door
Trim Armrest Regard to Side Impact Test
* Mr. Haeseok Choi (Hanil E-Hwa Co.,Ltd,
Korea)
[149] Study of Material Development of
Instrument Panel with Hard Type Seamless
PAB
Ms. Insook Chun, * Mr. Wongu Kang (GMDAT,
Korea)
[141] Study of the calculation method on
recyclability and recoverability rates of
vehicles
* Mr. Yun Jong Kim, Mr. Jae Hwan Kim, Ms. Jin
Gil (GMDAT, Korea)
[92] Status of Dismantling of End-ofLife Vehicles and Management of
Automobile Shredder Residues in
Korea
* Prof. Yong-Chil Seo, Mr. Hyun-Tae
Joung (Yonsei University, Korea), Mr.
John-Hee Hong, Mr. Tae-Wook Yoo
(Hyundai Motor Company & Kia Motors
Corporation, Korea), Dr. Ki-Heon Kim
(NIER, Korea)
ᶀᶀᶀ
[143] Influence of Internal Voids on Tensile
Properties of As-cast Magnesium-Aluminum
Alloy
Dr. Choong Do Lee, * Mr. Ho Joon Cho, Mr.
Sung Geun Woo, Mr. In Dong Kim (GM
Daewoo Auto & Technology(GMDAT), Korea)
ᶀᶀᶀ
19
ᵾᵾᵾ
Poster Session
Poster Session
ᵄ 16:20~18:20, 23 (Tuesday) August, 2005
08:10~10:30
10:30~11:00
11:00~12:00
13:30~15:50
15:50~16:20
16:20~18:20
19:00~21:00
ᵄ 16:20~18:20, 23 (Tuesday) August, 2005
Oral Session III
Coffee Break
Plenary Session II
Session IV
Coffee Break
Poster Session
Conference Banquet
Advanced Propulsion
08:10~10:30
10:30~11:00
11:00~12:00
13:30~15:50
15:50~16:20
16:20~18:20
19:00~21:00
Emissions & Environment
Advanced Chassis
Oral Session III
Coffee Break
Plenary Session II
Session IV
Coffee Break
Poster Session
Conference Banquet
Advanced Electronics
Place : Convention Hall Lobby B1
Place : Convention Hall Lobby B1
Chair Prof. Daeyup Lee (Inha University, Korea)
Chair Prof. Seang Wock Lee (Kookmin University, Korea)
Chair Prof. Daeyup Lee (Inha University, Korea)
Chair Prof. Seang Wock Lee (Kookmin University, Korea)
[304] Optimization of Hybrid Control
Strategy for Parallel Hybrid Electric
Vehicles - Single Shaft and Double
Shaft HEV
* Student. Kyoungcheol Oh, Student.
Jeongmin Kim, Prof. Hyunsoo Kim
(Sungkyunkwan University, Korea),
Student. Dongho Kim, Prof. Donghoon
Choi (Hanyang University, Korea)
[81] A Study of Nano-particle
Characteristics of After-treatment
System for a Heavy Duty Diesel Engine
* Mr. Chunhwan Lee, Dr. Chunbeom Lee,
Mr. Deokjin Kim, Mr. Taekwon Ha, Mr.
Kyoungbok Lee (KATECH, Korea), Dr.
Dongin Lee, Dr. Sangho Kim (Doosan
Infracore, Korea), Dr. Hyunsik Han, Dr.
Jaeho Bae (Heesung Engelhard, Korea)
[59] Development of New 6 speed
Automatic Transmission for Trucks and
Buses
* Mr. Munenori Kamino (AISIN SEIKI Co.,
Ltd., Japan)
[83] The Experimental Study of Diesel
Fuel Injection for Active Regeneration
of DPF System
* Mr. Chunhwan Lee, Dr. Chunbeom Lee,
Mr. Deokjin Kim, Mr. Jungho Kang
(KATECH, Korea), Mr. Jungmo Choi, Dr.
Younghwan You, Mr. Jaedeuk Jo (Hyundai
MOBIS, Korea)
[189] Development of New
Continuously Variable Transmission for
Bicycles
* Mr. Munu Park (Research Institute of
Mechanical Technology at Pusan National
University, Korea), Prof. Nogill Park
(Department of Mechanical Engineering,
Pusan National University, Korea)
[306] Mechanical Loss Model for a Metal
Belt CVT
* Student. Wansik Ryu, Student. Pilgu Kim,
Prof. Hyunsoo Kim (Sungkyunkwan
University, Korea)
[5] Enhanced Friction Component Test
System for Accurately Replicating
Transmission Shift Conditions
Dr. Yuji Fujii, Mr. Ted Snyder, Dr. William
Tobler (Ford Motor Company, United
States), Mr. Davis Lee, Mr. Martin
Scherzer, Mr. David Zander, * Mr. Young
Hwan Shin (Link Engineering Company,
Korea)
[180] The effect of semi-active muffler
on back pressure characteristics and
engine performance
* Student. Daiun Park, Prof. Kyoungsuk
Park, Student. Sungman Son, Mr.
Seokryeol Choi (Kyunghee University,
Korea), Student. Sejong Park, Mr.
Hocheol Suh (Sejong Industrial Company,
Korea)
[312] Real time PM size distribution
measuring system development and
PM distribution measurement
Dr. KangHo Ahn, Dr. KiHyung Lee, *
Student. ChangHoon Cha (Hanyang
University, Korea)
[350] Selective catalytic reduction of
NOx in diesel engine exhaust Pt loaded
mesoporous support (SBA-15) catalyst
* Student. Dong-Jin Kim, Student. JunWoo Kim, Student. Ja-Khung Cho, Dr.
Sung-Chul Lee, Prof. Misook Kang, Prof.
Suk-Jin Choung (KyungHee University,
Korea)
[133] Characteristics of Fuel Economy
and Exhaust Emissions in Turbo
Intercooler ECU Common-rail Diesel
Engines with a Combined Plasma EGR
System
* Prof. Myung-whan Bae, Student. Bongsub Lee (Gyeongsang National University,
Korea), Mr. Young-jin Ku (Korea
Transportation Safety Authority, Korea),
Prof. Yoshihiro Mochimaru (Tokyo Institute
of Technology, Japan),
[95] In-Cylinder Soot Measurement
Using Two-Dimensional Laser Induced
Incandescence and Laser Induced
Scattering Method
* Mr. DeokJin Kim, Dr. Chunbeom Lee
(Korea Automotive Technology Institute,
Korea), Prof. Wannam Lee (DanKook
University, Korea)
[119] A Numerical Study on Tire Wear
by Finite Element Method
Prof. Jin-Rae Cho, * Student. Joo-hyoung
Choi (School of Mechanical Engineering,
Pusan National University, Korea), Dr. GiJeon Kim, Dr. Jong-Shik Woo, Mr. KeeWoon Kim (R&D Center of Kumho Tire
Co., Ltd, Korea)
[171] The behavior of combustion
aerosols in an exhaust pipe
* Dr. Byung Uk Lee, Dr. Gwi-Nam Bae, Mr.
Jin Kuk Kim (Korea Institute of Science
and Technology, Korea), Dr. Jin Ha Lee,
Dr. Gwon-Koo Yeo (Hyundai Motor
Company & Kia Motors Corporation,
Korea)
[191] The estimation of tire forces in
VDC by HILS
* Student. Min Hyuk Son, Prof. Jeong
Hoon Song, Prof. Heung Seob Kim, Prof.
Kwang Seok Boo (Inje University, Korea)
[340] Characteristics of particulate
matters in exhaust emissions from a
heavy duty diesel vehicle
Dr. Yeo-Seong Yoon, Dr. Chun-Beom Lee,
* Ms. Min-Kyoung Kang, Ms. Mee-Hye Oh
(Korea Automotive Technology Institute,
Korea)
[173] The roadside measurement of
vehicle exhaust particles in Seoul
* Student. Minha An, Student. Dongho
Park, Prof. Jungho Hwang (Yonsei
University, Korea), Mr. Sang Geun Jung,
Dr. Gwi-Nam Bae (KIST, Korea)
[240] Study on vehicle operating speed
measurement model
Dr. Lang Wei, * Dr. Tao Chen, Dr. Limin
Gao (School of Automobile, Chang'an
University, China)
[223] Review of implementation of OBD
II/EOBD system in Poland (condition in
year 2005 )
* Dr. Marcin Rychter, Dr. Wojciech Gis
(Motor Transport Institute, Poland), Prof.
Jerzy Merkisz (Poznan University of
Technology, Poland)
[222] Monitoring of catalytical converter
in ci engine on basis of exhaust
emission in light of on board diagnostic
and ecological manageability of engine
* Dr. Marcin Rychter (Motor Transport
Institute, Poland)
[294] The effect of Temperature on
product distribution and reforming
reaction rate of n-Hexadecane on Rh
catalyst
* Student. Ja kyung Cho, Student. June
woo Kim, Student. Dong jin Kim, Dr. Sung
chul Lee, Prof. Suk jin Choung (kyung-Hee
University , Korea), Dr. Jae ho Bae
(Heesung-Engelhard, Korea)
ᶀᶀᶀ
20
[209] A Study on Maneuver Event
Regeneration for Durability Test of
Vehicle Suspension System
* Mr. Jungmin Ryoo (GMDAT, Korea)
[266] Development and Evaluation of an
Electric Power Steering System
Dr. Jeonghoon Song, Dr. Kwangsuck Boo,
* Student. Jongil Lee (Inje University
Korea), Mr. Sunyoung Hong (Mecca-tech,
Korea)
[267] A Study on a Hybrid Electric
Brake System by Using ABS and TCS
Controller
Dr. Jeonghoon Song, Dr. Kwangsuck Boo,
Dr. Heung Seop Kim, * Student. Jong Ju
Kang (Inje University, Korea)
[251] Study on Road Safety Evaluation
System Based on Virtual Reality
* Dr. Tao Chen, Dr. Lang Wei (School of
Automobile, Chang'an University, China)
[200] An evaluation algorithm of IPS
in automotive application
* Mr. Ealgoo Kim, Mr. Jihoon Lim, Mr.
XueFeng Jin, Mr. Shiva Ram Krishna,
Prof. Jaehong Park, Mr. Shuai Peng
(Seoul National University, Korea), Mr.
HwangGeol Lee, Mr. Joengil Kim, Mr.
Hyungmo Kang, Mr. Jangdon Choi
(Hyundai Motor Company, Korea)
[205] A Study on an Algorithm of a
Network Node for a CAN (Controller
Area Network)-Based Wiring System
Using Polling Structure
* Mr. Shuai Peng, Mr. Taeyeon Lee, Mr.
Ealgoo Kim, Prof. Jaehong Park (Seoul
National University, Korea)
[93] Numerical Analysis of Pressure
Control Characteristics in a Solenoid
Valve
Prof. Hyung-Man Kim, * Mr. Hae-Il Jung,
Mr. Hak-Min Wang (Inje University,
Korea), Mr. Hyeok-Jun Tae (KyungWon
Tech Co. Ltd., Korea)
[3] Modeling and Analysis of Fuel Cell
Powered Light Vehicle with
Supercapacitors
* Dr. Yuang-Shung Lee, Student.
Jeremy C.C. Chang, Student. Chao-Tai
Kuo, Student. Szu-Han Chen (Fu-Jen
Catholic University, Taiwan)
[97] A Development of a Simulation
System for Validation of Circuit
Protection by Fuses for Automotive
Wiring Systems
Dr. Yongmin Kim, Mr. Woo Young Park
(Nano-Tronix Co., Ltd., Korea), * Mr.
Sungryul Hong, Mr. Jinho Sung, Prof.
Jaehong Park (Seoul National
University., Korea), Mr. Yong Jun Lee,
Mr. Jang Don Choi, Mr. Jeong Ho Yoon,
Mr. Eui Bong Kim (Hyundai Motor
Company, Korea)
[201] Study of Correlation Between
Simulation Transients and Actual
Transients in the Vehicle
* Mr. Kyucheol Choi (GMDAT, Korea)
[113] Function Measurement for
Smart Airbag Electronics Control Unit
(ECU)
* Student. Jaewoo Kim, Prof. Gwitae
Park, Dr. Kyungbae Chang (Korea
University, Korea)
[272] Traffic signal and Speed limit
sign recognition for understanding of
road condition
* Dr. Euiyoon Chung, Mr. Jinmin Chun,
Mr. Insik Lee (Hyundai Motor Company,
Korea), Mr. Sangmook Lim, Mr. Kwangil
Park (PLK, Korea)
ᵾᵾᵾ
Design, Manufacturing & Materials
[96] Optimal Design of an Intake System
Using the Booming Noise and the Sound
Quality Evaluation Index
* Dr. Jongkyu Lee, Ms. Indong Kim (GM
Daewoo Auto & Technology, Korea)
[102] A Study on Quantifying Damage by
Service Load with Relative Damage Method
* Mr. DoHyun Jung (Korea Automotive
Technology Institute, Korea), Dr. SungIn
Bae, Mr. JeongDae Kim (Changwon National
University, Korea), Mr. Shin Pilsu (Agency
for Technology and Standards, Korea)
[140] Improvement of Sealing Performance
of High Pressure Power Steering Hose
with Finite Element Analysis
* Mr. Yoosin Kang, Mr. Byungkwon Min, Dr.
Jeongseok Oh (Hyundai Motor Company,
Korea), Dr. Sunghoon Kim (MSC Software
Korea, Korea), Mr. Younghan Lim, Mr.
Junghwan Lee (HS R&A Co., Ltd., Korea)
[175] The Impact Collapse Characteristics
of Al/CFRP Structural
Student. KilSung Lee (Chosun University
Graduate School, Korea), * Dr. InYoung
Yang (Chosun University, Korea)
[176] The Resonant Spectrum Evaluation
of a Spherical Lens
Student. Seung Hoon KIM (Chosun University
Graduate School, Korea), * Dr. In Young
Yang (Chosun University, korea, Korea), Dr.
Kwang Hee IM (Woosuk University
Department of Automotive Eng, Korea)
[215] Evaluation of Fatigue Strength and
Residual Stress Properties due to Hole
Expansion with Various Edge Margin
* Dr. Dong Suk Lee, Mr. Kang Wuk Kim, Mr.
Jong Ryul Shin (WIA Coporation, Korea),
Prof. Hyun Woo Lee (Pusan National
University, Korea)
[280] Simulation Software Application for
Production Flow Analysis and Optimization
* Mr. Sungkook Cheon, Mr. Ram Prabhu, Mr.
Nelson Andres, Mr. Dowon An, Prof.
Bongchoon Jang, Prof. Yong-Gyun Eom
(Dept. of Mechanical Engr., Andong National
University, Korea)
[285] Fatigue lifetime evaluation of
structural steels based on hardness and
elastic modulus
* Dr. Byeong Choon Goo, Dr. Sungyong
Yang, Mr. Jaehoon Kim (Korea Railroad
Research Institute, Korea)
[56] Tribological Properties of AluminumCeramic Composite Coating by Plasma
Thermal Spray
* Dr. Joon Won Min, Dr. Seung-Eul Yoo
(KATECH, Korea), Dr. Dong Soo Suhr
(Chungnam National University, Korea)
ᶀᶀᶀ
[186] New Calculation Method for the Total
Effective Moment of LIPCA Using
Actuating Height
* Prof. Cheol Woong Kim, Prof. Kwang Joon
Yoon (Konkuk University, Korea), Prof. Dong
Joon Oh (Andong National University, Korea)
[271] Ultrasonic Characterizrion of Plylayup Interface Using CF/Epoxy
Composite Laminates Under Before and
After Curing Conditions
Prof. Kwang-Hee Im (Woosuk University,
Korea), Prof. David K. Hsu, Dr. Dong Fei
(Iowa State University, United States), Prof.
Je-Woong Park (Chosun University , Korea),
Prof. Jae-Ki Sim, Student. Kil-Sung Lee,
Student. Do-Jeong Kim (Chosun University,
Korea), * Prof. In-Young Yang (Chosun
University, Korea), Dr. Seung-Woo Ra
(Kongju University, Korea)
[277] Fatigue properties of Al-based
composites reinforced with silicon
carbide by cold spray method.
* Mr. Seok Ha, Dr. Chang-Yeol Jeong, Dr.
Do-Seok Han, Mr. Jong-Dae Lim (Hyundai
Motor Company & Kia Motor Coporation,
Korea), Dr. Ha-Yong Lee, Prof. Kyung-Hyun
Ko (Ajou University, Korea)
[82] Multidisciplinary Design Optimization
of an Aluminum Vehicle Body Using the
RSM based SAO Technique
* Dr. Bumjin Kim (Hyundai Motor Co., Korea),
Prof. Minsoo Kim, Prof. Seungjin Heo
(Kookmin University, Korea)
[269] The Effects of Oblique Impact on the
Penetration Characteristics of CFRP
Curved Shell
Student. Youngjea Cho, Prof. Jaeki Sim, *
Prof. Inyoung Yang (Chosun University,
Korea)
[106] An Experimental Study on Bolt
Tension Load for Bolted Connection
between Suspension Crossmember and
Control Arm
* Mr. MuKeon Song, Mr. KyuJin Han (GM
Daewoo Auto & Technology co., Korea)
[108] A Study of Characteristics of Valve
Dynamics using Hydraulic Lash Adjuster
Dr. Sun Ki Min, * Mr. Changhan Yu, Mr. Dae
Gon Shim, Mr. Choong Goo Lee (GM
Daewoo, Korea)
[111] Increase of Motoring Torque
According to Crankcase Oil Quantity
Dr. Sun Ki Min, * Mr. Bong Jo Kim, Mr.
Choong Goo Lee (GM Daewoo, Korea)
[112] The Effect of Crush Height of Main
Bearing on Oil Pressure and Oil Flow Rate
* Dr. Sun Ki Min, Mr. Bong Jo Kim, Mr.
Choong Goo Lee (GM Daewoo, Korea)
21
ᵾᵾᵾ
[139] Development of an Accelerated
Corrosion Testing Model for Automotive
Components : Part 1. Experimental
Assessment of Optimized Accelerated
Testing Conditions
* Dr. Seungho Ahn, Mr. Hyunmin Ahn, Mr.
Shinjong Oh, Mr. Byunghoon Min, Dr.
Wonwook Jung (Hyundai Motor Co. & Kia
Motors Corp., Korea), Prof. Junggu Kim
(Sungkyunkwan University, Korea)
[218] Tensile Testing Procedure for
Generating Stress-Strain Curves of Autobody Materials
* Dr. Jiho Lim, Dr. Sungho Park (POSCO,
Korea), Student. Seokbong Kim, Student.
Jinsung Kim, Prof. Hoon Huh (KAIST, Korea),
Mr. Soonyong Kwon (Hyundai Motors
Company, Korea)
[283] Evaluation of Dynamic Tensile
Characteristics of the High Strength Steel
Sheet for an Auto-body
* Student. Seokbong Kim, Prof. Hoon Huh
(Korea Advanced Institute of Science and
Technology, Korea), Mr. Daeon Kim, Mr.
Manbean Moon (HYSCO, Korea)
[318] Evaluation of the Corrosion
Characteristic of Hemming Joints in
Automotive Body
* Dr. Eui-Jun Kim, Mr. Minsoo Choi, Mr.
Bumgoo Chung, Mr. Jongdae Lim (Hyundai
Motor Company, Korea)
[101] A Study on the NVH Characteristic for
the Improvement of Plastic Intake Manifold
* Mr. Jae-Eun Song, Dr. Seong-Ho Yoon, Mr.
Seung-Mok Baek (GMDAT, Korea)
[103] Experimental Modal Analysis of
Various Powertrain Submodels
* Mr. Sang-Su Hong, Dr. Seong-Ho Yoon, Mr.
Jae-Eun Song (GMDAT, Korea)
[142] Effect of Precipitation Transformation
on Damping Property of MagnesiumAluminum Alloy on Artificial Aging
Dr. Choong Do Lee, * Mr. Whan Chul Cho, Mr.
Hyo Suk Lim, Mr. In Dong Kim (GM Daewoo
Auto & Technology(GMDAT), Korea)
[179] The Effects of Exhaust Pipe Shape
on the Performance of an Automotive SI
Engine
* Prof. Kyoungsuk Park, Student. Sungman
Son, Student. Daiun Park (Kyunghee
University, Korea), Mr. Sejong Park, Mr.
Hocheol Suh (Sejong industrial company,
Korea)
[347] Noise reduction of vacuum pump
with Alternator using DOE;A case study
* Mr. Soonsik Park, Mr. Yongchan Kim (Valeo
Korea, Korea), Prof. Byoungduk Lim
(Yeungnam University, Korea)
Closing Ceremony
Date
Time
Place
Social Program
Welcome Reception
August 24, 2005
11:30~12:30
Convention Hall
Conference Banquet
Prof. Kwang Min Chun
Master of Ceremony
Yonsei University
Prof. Kwang Min Chun
Highlights of IPC-13
Yonsei University
Prof. Chang-Sik Lee
Farewell Address
Welcome to APAC-14
Speech
Chairman of IPC-13 Organizing Committee
Mr. Ted Robertson
August 21, 2005
19:00 ~ 21:00
Terrace Garden, Hyundai Hotel
Date
Time
Place
August 23, 2005
19:00 ~ 21:00
Convention Hall
President of SAE-International
Technical Visit
Date
Time
Place
Date
Time
Place
All participants are invited to attend the Welcome
Reception. The participants to IPC-13 will have an
opportunity to break the ice and network.
It is an arena to build networks among participants
while experiencing traditional performance & event.
Farewell Lunch
Lunches
August 24, 2005
14:00~17:30
Hyudnai Motors Ulsan Plant
Hyundai Motors Ulsan Plant, where the IPC-13 industrial visit will be carried
out, is located in Ulsan, about 50 minutes away by car from Gyeongju.
The factory started producing cars since December 1975. It is the largest
single factory in the world and possesses the capability of producing
1,510,000 units annually.
The Technical Visit will be offered free of charge and is scheduled after the
last lunch.
We highly encourage all the participants to attend the Technical Visit. Please
check the box next to Technical Visit on the registration form to attend.
* Please come to the hotel lobby by at 13:50 to leave at 14:00 punctually.
* At the end of the Technical Visit, transportation will be arranged for two
destinations - back to the Hotel Hyundai and to the Busan International
airport. Those who wish to go to the Busan International Airport are advised
to check out from the hotel prior to joining the Technical Visit.
ᶀᶀᶀ
22
ᵾᵾᵾ
Date
Time
Place
August 24, 2005
12:30 ~ 13:30
Convention Hall
Date
Time
Place
All participants are invited to the Farewell Lunch,
which will be held in the Hotel Hyundai, following
the closing ceremony, prior to the technical visit.
This final lunch will be to wrap-up and to
promise the next meeting .
August 22~23, 2005
12:00~13:30
Crystal F1, Topaz B1
The Organizing Committee provides lunches for
the conference participants in Crystal and Topaz
rooms from 12:00~13:30.
Please note that the name tag (you should register
first at the registration desk in front of the
Convention Hall) is required to enter the lunch room.
Accompanying Persons
All registered accompanying persons are welcome to join the Opening & Closing ceremonies, Welcome
Reception, Conference Banquet, Farewell Lunch and Lunches.
ᶀᶀᶀ
23
ᵾᵾᵾ
Student Program
Optional Tour
Schedule
Gyeongju had been a capital of the ancient kingdom, Shilla, for 1,000 years and subsequently the heart of Korea when Silla
unified the peninsula in 676 A.D. UNESCO designated it as one of the world's ten most historically significant sites, since it is
filled with amazing treasures and relics throughout the city. The first destination city for all the tourists!
Date
Program
⍨ Arrival in Gyeongju
August 21
P.M.
⍨ Hotel Check-in (Hotel Concorde)
⍨ Welcome Reception
10:00
⍨ Opening Ceremony
14:00
⍨ Visit Pohang University of Science and Technology
09:00
⍨ Half-day Tour “Gyeongju City Tour”
August 22
August 23
16:20
11:30
⍨ Commencement of the Student Program
⍨ Conference Banquet
⍨ Closing Ceremony
⍨ Farewell Lunch
August 24
14:00
⍨ Technical Visit “Hyundai Motors Ulsan Plant”
⍨ Departure
Half Day Tour: “East Sea District Explore”
August 22 (Mon), 2005, 14:00 ~ 18:00
Program: Underwater Tomb of King Munmu - Girimsa Temple - Golgulsa Temple
Price : USD45/KRW45,000 per person (Min 10 persons)
Note:
- Includes an English speaking guide and entrance fees, but not personal expenses
- Could be cancelled in case less than 10 persons apply
- Depart from and return to Hotel Hyundai
- Departure: meet at the Convention Hall Lobby 10 minutes before leaving.
- Reconfirmation is required by the day before the tour at the tour registration desk.
Half Day Tour: “Gyeongju City Tour”
August 22 (Mon), 2005, 14:00 ~ 18:00
Program: Chemseongdae Observatory - Gyeongju National Museum - Anapji Pond
Price : USD40/KRW40,000 per person (Min 2 persons)
Note:
- Includes an English speaking guide and entrance fees, but not personal expenses
- Could be joint with other visitors
- Depart from and return to Hotel Hyundai
- Departure: meet at the Convention Hall Lobby 10 minutes before leaving..
- Reconfirmation is required until the day before a tour at the tour registration desk.
Full Day Tour: “The Historical Site in Gyeongju”
August 23 (Tue), 2005, 09:30 ~ 18:00
Program: Seokguram - Bulguksa Temple - Gyeongju Fork Craft Village - Lunch - Chemseongdae
Observatory - Gyeongju National Museum - Anapji Pond
Price: USD75/KRW75,000 (Min 2 persons)
Notes:
- Includes an English speaking guide and entrance fees, but not personal expenses
- Could be joint with other visitors
- Depart from and return to Hotel Hyundai
- Departure: meet at the Convention Hall Lobby 10 minutes before leaving
- Reconfirmation is required until the day before a tour at the tour registration desk.
Other Meetings
SAE-IPC Members Meeting
The SAE-IPC Members Meeting in Gyeongju will mainly cover various issues such as the program report of APAC-14,
the future APAC-15 host and others.
Date August 23, 2005
Time 13:30~15:50
Place Opal room
FISITA Executive Board Member Meeting
Night Tour “Busan City Tour & Cruise”
August 24 (Wed), 2005, 18:00 ~ 22:00
Program: Dinner - Busan Night tour - Cruise
Prices: USD135/KRW135,000 per person (Min 4 persons)
USD205/KRW205, 000 per person including accommodation (Chosun Beach Hotel in Busan)
(Based on double occupancy at a 5-star hotel with breakfasts/ additional charge for single occupancy
KRW70,000)
Notes:
- Includes an English speaking guide, dinner and entrance fees, but not personal expenses
- Could be cancelled in case less than 4 persons apply
- Cruise schedule can be changed as to whether condition
- Departure from Hotel Hyundai (15:00) and the Ulsan Plant (16:30)
- Does not return to Hotel Hyundai, Gyeongju. Break up in Busan
- Departure: Leave at Hotel Hyundai at 15:00 and the gates of Hyundai Motors Ulsan Plant at 16:30
(you may be required to check-out before leaving )
- If you need accommodation, (Chosun Beach Hotel in Busan) please inform us via e-mail by
August 17th.
- Reconfirmation is required by the day before the tour at the tour desk
FISITA Executive Board Member Meeting will be from August 22nd ~ 23rd, 2005.
Executive Board Member Meeting I
Date
Time
Place
Executive Board Member Meeting II
August 22, 2005
14:00~18:00
Opal room
Date
Time
Place
ᶀᶀᶀ
24
ᵾᵾᵾ
August 23, 2005
16:20~18:20
Opal room
Booking Conditions
- All optional tour fees will be accepted on-site only at the tour registration desk
-On-site registration for optional tours should be booked and reconfirm by one day prior to the tour. (Except the night tour
should be booked by August 17th)
- More tour programs will be available at the tour registration desk, which will be operated from 09:00~18:00 during the
conference at the venue, Hotel Hyundai, Gyeongju.
ᶀᶀᶀ
25
ᵾᵾᵾ
General Information
Accommodation
Gyeongju
5-minute walking distance from Hotel Hyundai
- Hotel Concorde
- Gyeongju Tourist Hotel
- Ilsung Condominium
Gyeongju lies on the southeastern part of the country and is about one hour drive from
Busan, five hour drive from Seoul, the capital city of Korea. Gyeongju, called the
“Museum without Walls”, was once the ancient capital of the Shilla Kingdom.
UNESCO designated it as one of the world’s ten most historically significant sites.
5 minutes by car or 20 minutes walking distance from
Hotel Hyundai
- Gyeongju TEMP Hotel
It is this preservation of the past, along with Gyeongju’s clean air, mild climate, and
natural beauty that make it an ideal place to meet and relax.
Today, Gyeongju is not only a world famous tourist destination, but an increasingly
popular convention and incentive tour site. One reason for this reputation is the Bomun
Lake Resort, located 6.5km east of downtown Gyeongju.
General Information about Korea
1. Business Hours
Government office hours and most private business are from 09:00 to 18:00, and close in the evening. Bank hours,
however, are from 09:30 to 16:30 only on weekdays.
2. Currency Exchange
The unit of Korean currency is the won. Foreign bank notes and traveler's checks can be converted into Korean won at
banks, the bank windows located throughout the lobby of Airport, and at major hotels. Be sure to keep your receipt
when you exchange money, so you can convert it back when you leave Korea. Internationally recognized credit cards
including VISA, American Express, Diner's Club, Master card, and JCB card are accepted at most hotels, department
stores, and restaurants. U.S. dollar 1 is approximately equivalent to Korean won 1,050 (June, 2005).
3. Credit Cards
Credit cards are widely accepted at stores and restaurants in Korea. American Express, Diners Club, Visa, Master
Card, and JCB are popularly used.
4. Electrical System
Outlets for 220 volts 60 cycle are predominantly used. Always check the power supply before using your equipment.
5. Telephone Calls
A local call costs ￦90 for three minutes. To make an international call, dial the international dialing code (001, 002 or
008), then the country code, area code, and finally the individual number. You may rent a cell phone at the airport.
6. Tax & Tipping
Value-added tax is levied on most goods and services at a standard rate of 10% and is included in the retail price.
Tipping is not customary in Korea. In tourist hotels, a 10% service charge is added to the bill.
* There is no shuttle bus between hotels.
1. Hotel Hyundai, Gyeongju (Venue)
3. Gyeongju TEMF Hotel
ƃ Reservation
- Contact Mr. Kelvin Kim
- Tel
+82-2-3669-4100
- Fax
+82-2-3669-4107
ƃ Hotel Front Desk
- Tel
+82-54-748-2233
ƃ Reservation
- Contact Ms. Hyo Ju Lee
- Tel
+82-2-526-9666
- Fax
+82-2-579-0058
ƃ Hotel Front Desk
- Tel
+82-54-745-8100
The Hotel Hyundai, Gyeongju, the venue of IPC-13, is
located in the Bomun Lake resort.
It is surrounded by beautiful scenery with Bomun Lake
providing the backdrop, Bomun Lake Resort is an
international resort which is equipped with many cultural
and leisure facilities such as deluxe hotels, condominiums,
golf courses, an outdoor performance theater, a drive-in
theater, and Gyeongu world.
Hotel TEMF has 270 furnished rooms with Western or
Korean Style interior that make guests feel comfortable and
at home. Having five-language interpretation system,
furnished for international conferences, seminars, receptions
and various dinner parties, your satisfaction will be doubled.
4. ILSUNG Condominium
ƃ Reservation
- Contact Ms. Jin Sun Heo
- Tel
+82-2-2128-9172
- Fax
+82-2-732-1199
ƃ Hotel Front Desk
- Tel
+82-54-744-1199
2. Hotel Concorde, Gyeongju
ƃ Reservation
- Contact Ms. Ji Ae Seo
- Tel
+82-2-753-2481
- Fax
+82-2-753-6036
ƃ Hotel Front Desk
- Tel
+82-54-740-6230
ILSUNG Condominium is located in the Bomun Lake
Resort in Gyeongju. ILSUNG offers comfort at a
reasonable price. You can cook like at your own home with
all kinds of appliances and equipments needed in a
household.
Hotel Concorde is surrounded by the rich culture and
natural beauty of the Bomun Lake Resort. It faces Lake
Bomun and is sufficient to impress anyone with the area's
historical attractions. A tranquil haven of traditional Korean
hospitality with outstanding first class facilities and services
will make every function memorable.
5. Gyeongju Tourist Hotel
ƃ Reservation & Hotel Front Desk
- Tel
+82-54-745-7123
- Fax
+82-54-745-7129
7. Weather
The climate of Korea is characterized by four distinct seasons: spring, summer, fall, and winter. The Conference will be
held during the summer, when the weather will be hot and humid, the temperature being around 25~30°C.
ᶀᶀᶀ
26
ᵾᵾᵾ
Gyeongju Tourist Hotel has always tried to satisfy the
guests' needs, keep peace with the stream of the times
and give the guests more convenient facilities for comfort.
ᶀᶀᶀ
27
ᵾᵾᵾ
How to Get to the Venue
Onsite Guidelines
Gyeongju is a city in the south east of Korea and one hour flight
from Seoul.
Flights are available frequently from Gimpo Airport (Seoul) to
Gimhae Airport (Busan), and there are few flights from Incheon
Int’l Airport to Gimhae.
Gimhae airport has also direct flight to and from Japan and China.
1. Registration Desk
Gimhee
Airport
Gyeongju
Gimhee
Airport
Gyeongju
There are airports in nearby cities, such as Ulsan, Pohang and
Daegu. We recommend you get to Gyeongju via Gimhae airport.
From Gimhae Airport to Gyeongju Express Bus Terminal, the
limousine bus is available.
The registration desk will be located in front of Convention Hall B1 of Hotel Hyundai and participants may pick up the
conference materials (conference kit, name tag, abstract book, and so onᴎ) after registration. Onsite registration fee:
USD 700 for regular participants, USD 600 for speakers, USD 250 for students and USD 170 for accompanying
persons.
* The desk will be open during the following hours:
- August 21 (Sunday) 14:00~18:00
- August 22 (Monday) 08:30~17:30
- August 23 (Tuesday) 08:00~17:00
* The Conference coupon will be attached to the name tag. Please exchange the coupon for the conference bag at the Kit desk.
2. Information Desk
The main information desk will be located at Convention Hall lobby and will be equippied with journals and other
information.
Transportation from Gimhae (Busan) Airport to the Venue
From Gimhae Airport (Busan) to Hyundai Hotel, it takes approximately 1 hour 20 minutes.
Limousine buses run between Gimhae airport and Gyeongju Express Bus Terminal but not directly to the conference site.
If you choose to take a taxi from Gyeongju Express Bus terminal to the hotel, it will cost approximately KRW10,000.
We recommend using free shuttle buses from Gyeongju Express Bus Terminal to Hyundai Hotel during the conference.
ᵄ Airport Limousine Bus
⍨Route: Gimhae Airport ▾ Gyeongju Express Bus
Terminal
⍨Traveling Time: 1 Hour 20 minutes
⍨Fare: KRW9,000
Arrival in Gimhae (Busan) Airport
Gimhae
Airport
Airport
Limousine Bus
Gyeongju
Express Bus
Terminal
Free Shuttle
Bus
Gyeongju
Station
Free Shuttle
Bus
Hotel
Hyundai
* Airport Limousine Bus Schedule
Gimhae Airport ⑇ Gyeongju Express Bus Terminal
ᵄ Free Shuttle Bus
08:30, 09:30, 10:30, 12:00, 13:00, 14:00, 15:30, 16:30, 17:30, 19:00, 20:20
⍨Route: Gyeongju Express Bus Terminal
▾ Gyeongju Train Station ▾ Venue (Hotel Hyundai)
⍨Traveling Time: Approximately 30 minutes
⍨Fare: Free
* Free Shuttle Bus Schedule
3. Tour Information Desk
All optional tour fees will be accepted on-site only at the tour registration desk
On-site registration for optional tours should be booked and reconfirmed by one day prior to the tour.
(except the night tour which should be booked by August 17th)
More tour programs will be available at the Tour Information Desk, which will be operated from 09:00~17:00 during the
conference at the venue, Hotel Hyundai, Gyeongju.
4. Internet Cafe, Preview Room
The Internet Cafe and Preview room are open during the conference in business center 2F.
Desktop computers and printers will be available at the Internet Cafe and Preview room.
If you have any amendments to your presentation file, please bring your revised file to the preview room prior to at lest
a day before the presentation.
Gyeongju Express Bus Terminal ⑇ Gyeongju Station ⑇ Hotel Hyundai
August 21 - 13:30, 14:30, 15:30, 17:00, 18:00, 19:00, 20:30
August 22 - 10:00, 11:00, 12:00, 13:30, 14:30, 15:30, 17:00, 18:00, 19:00, 20:30
Departure from Hotel Hyundai, Gyeongju
ᵄ Taxi
⍨Route: Gimhae Airport ▾ Venue
⍨Traveling Time: Approximately 1hour 20 minutes
⍨Fare: KRW 80,000
Hotel
Hyundai
Free Shuttle
Bus
Gyeongju
Station
Free Shuttle
Bus
Gyeongju
Express Bus
Terminal
Airport
Limousine Bus
Gimhae
Airport
* Airport Limousine Bus Schedule
Gyeongju Express Bus Terminal ⑇ Gimhae Airport
06:50, 08:00, 09:00, 10:30, 11:30, 12:30, 14:00, 15:00, 16:00, 17:30, 18:30
⍨Route: Gyeonju Express Bus Terminal ▾ Venue
⍨Traveling Time: Approximately 20 minutes
⍨Fare: KRW 10,000
* Free Shuttle Bus Schedule
Hotel Hyundai ⑇ Gyeongju Station ⑇ Gyeongju Express Bus Terminal
August 24 - 11:40, 13:10, 15:10, 16:40, 17:40
* IPC-13 Special Carrier (Free)
⍨Route: Gyeongju Station ▾ Venue
⍨Traveling Time : Approximately 15 minutes
⍨Fare: KRW 9,000
Hotel Hyundai ⑇ Gyeongju Station ⑇ Gyeongju Express Bus Terminal ⑇ Gimhae Airport
August 24 - 14:00
August 25 - 07:10
5. Preparatory Meetings
ᶀᶀ Oral
To ensure a smooth operation and to improve the communication between chairpersons and speakers, please attend
the Preparatory Meeting held in the assigned session rooms. Please be seated in the assigned session room 20
minutes prior to the beginning of your session and introduce yourself to the chairman.
- MP01~MP07 : August 22 13:10~13:30
- ME01~ME06 : August 22 16:00~16:20
- TA01~TA07 : August 23 07:50~08:10
- TP01~TP07 : August 23 13:10~13:30
- WA01~WA07 : August 24 07:50~08:10
ᶀᶀ Poster
Poster session is scheduled 16:20~18:20 on Tuesday, August 23rd. Please go to the assigned poster board 1 hour
prior to the beginning of Poster Session and introduce yourself to the chair.
- ME08: August 23 15:00
- Installation: August 23rd , Tuesday, Convention Hall Lobby, 09:00~15:30
- Removal: August 23rd , Tuesday, Convention Hall Lobby, 18:20~19:00
6. Secretariat
For further information, please visit our website www.ipc13.org
ᶀᶀᶀ
28
ᵾᵾᵾ
The Secretariat Office is open during the conference in Banquet room B1. If you have any inquiries about the
conference, please visit the Secretariat.
ᶀᶀᶀ
29
ᵾᵾᵾ