Brochure
More information from http://www.researchandmarkets.com/reports/2303339/
Metallurgy Technology and Materials
Description:
Series: Advanced Materials Research, Volume 567
Selected, peer reviewed papers from the 2012 International Conference on Metallurgy Technology and
Materials (ICMTM 2012), May 11-12, 2012, Jeju Island, South Korea
The objective of ICMTM 2012 was to present the latest research results of scientists and engineers in the
fields of Metallurgy, Mining Engineering, Advanced Materials Science and Materials Processing Technology.
The peer-reviewed papers are grouped into chapters: 1 - Advanced Materials and Technology in Metallurgy;
2 - Materials Engineering and Production Technologies.
Contents:
Table of Contents (59 papers, 10 per page listed)
Vibration Analysis and Simulation of Mast Section of Hoist
Ji Man Luo, Yang Jiang, Zhi Hui Xing
Cleaness of the First Pipeline Steel Slab along with Casting Direction
Jian Huang, Yi Min, Cheng Jun Liu, Mao Fa Jiang
Microstructure and Properties of In Situ Fabricated Al-5wt.%Si-Al2O3 Composites
Ling Cheng, De Gui Zhu, Ying Gao, Wei Li, Bo Wang
Mössbauer and Magnetic Property Study on Cyano-Bridged Complex [Gu(en)x]yMA[Fe(CN)6]z·nH2O(MA=K+)
Zhong Hui Ye, Qing Lin, Hai Fu Huang, Yun He, Shao Hong Chen
Synthesis of ZnO Nanoparticle by Solid State Reaction and its Influence on Zinc Electrode
Hua Qing Wang, Rui Li, Cheng Xuan Xiang
Microstructure Evolution of Ti-9.2Mo-2Fe Alloy
Cheng Lin Li, Dong Geun Lee, Wen Jun Ye, Xu Jun Mi, Yong Tai Lee
A Comparative Study of SHS Synthesis of TiB2 Cermets Powder by Magnesium Reduction and
Aluminothermy Reduction
Hai Bo Wang, Xi Bao Wang, Hui Li
Mechanical Characterization of Ti-Mo-Fe Titanium Alloy
Jung Hwa Seo, Dong Geun Lee, Cheng Lin Li, Xu Jun Mi, Yong Tai Lee
Preparation of Flowerlike Indium Oxide Films by a Simple CVD Method
Z.L. Li, J.Y. Zhou, Z.P. Wang, J.H. Gu, Y.W. Zhang, Y.X. Wei
Corrosion Behaviour of Zn-Al Pseudo-Alloy Coating on Carbon Steel in Chloride Environments
An Qiang Liu, Kui Xiao, Chao Fang Dong, Xiao Gang Li
Mechanical and Microstructural Properties of Al-Added ODS Ferritic Steel
Jae Hoon Lee
Study of Fatigue Properties of AISI4130 Steel Joined by Upset Welding in Heat Treated Condition
H. Mollazadeh, R. Nouruzi
Improvement of Abrasion Wear Resistance of Ductile Iron by Two-Step Austempering
Prapaporn Silawong, Apichart Panitchagul, Sudsakorn Inthidech, Narong Akkarapattanagoon, Usanee
Kitkamthorn
Effect of Basicity on Continuous Casting Mold Flux Properties
Xin Hua Zhu, Li Guang Zhu, Yu Liu, Peng Fei Wang
Relationship between Load, Rotation Speed and, Strength in All - PEEK and PEEK Race – PTFE Retainer Hybrid
Polymer Bearings under Dry Rolling Contact Fatigue
Koshiro Mizobe, Takashi Honda, Hitonobu Koike, Edson Costa Santos, Katsuyuki Kida, Yuji Kashima
The Effect of Isothermal Treatment on the Microstructure and Properties of High Performance Steels
Xue Min Wang, Yan Qing Zhao
Peritectic-Steel Mold Fluxes
Xin Hua Zhu, Li Huang Zhu, Yu Liu, Tian Long Liu
Microstructure and Mechanical Properties in Ultra-High Strength Steel with Tensile Strength 1000MPa
Yu Xi Ma, Bin Guo, Lin Zheng, Chang Song, Chang Ming Liu, Jun Hui Tao
Determine Coverlay Thickness According to Air Leakage Characteristics in Open Pit to Underground Overlay
Chen Chao, De Qing Gan, Ling Qi Zhu, Ya Bin Zhang, Hong Jian Lu
Precipitation Behavior of a Maraging Stainless Steel
Yue Jiang, Ying Ying Ai, Qi Ting Wang
Influence of MgO Additive on Fluidized Bed Reduction of Iron Ore Fines under Simulate COREX Reducing Gas
Jian Hua Shao, Hui Qing Tang, Zhan Cheng Guo
Aging Behaviors of Ti-Al-Mo-Fe Titanium Alloy
Dong Geun Lee, Cheng Lin Li, Jung Wha Seo, Xu Jun Mi, Yong Tai Lee
Al-Mg Deoxidation of High Nitrogen Steels in VIF
Guo Feng Geng, Fan Ya Kong
Effects of Hot Working and Heat Treatment on Properties of Ti-62A Alloy Plate
Rui Liu, Song Xiao Hui, Wen Jun Ye, Yang Yu, Yan Yan Fu, Xiao Yun Song, Xi Guang Deng
Effects of Processing Technic on Grain Size of Copper Clad Steel Wire
Qing Mei Wu, De Qing Wang, Yang Gao
Microporous Bio-Membrane Materials Based on High Molecular Weight Polylactide and Low Molecular
Weight Poly(ethylene glycol)
Teng Fei Shen, Man Geng Lu, Li Yan Liang
Preparation of ZnAl2O4 Spinel Directly from Zinc Aluminum Layered Double Hydroxide Precursor
Jian Ye Song, Ming Zhe Leng, Xing Qi Fu, Jian Qiang Liu
Process Mineralogy of an Oolitic Hematite Ore and its Implications for Mineral Processing
Hui Xin Dai, Wei Zhao, Li Kun Gao, Bao Xu Song
Shape Memory Characteristics of NiTi Alloy Wire under Various Constrained Stresses
Y.F. Li, X.J. Mi, X.Q. Yin, H.F. Xie
Simulation of Casting Process for Ductile Iron Wind Generator Rotor Shaft
Ming You, Xiao Gang Diao
Study on Automobile Body Performance of Honeycomb Sandwich Composite Material
Xue Mei Fan, Jian Feng Wang, Cheng Jin Duan, Xiang Xin Xia, Zhao Hui Wang
The Study of SiC Substrate MgB2 thick Films Growing along C Axis
Yin Bo Wang, Sheng Meng, Qian Dai, Zhang Yan, Qing Rong Feng
The Study of Microstructure and Electric Resistivity of SiC Thin Films Produced by MF Magnetron Sputtering
Yang Yang Li, Jun Jie Hao, Xiao Jia Wang, Rui Xin Wang, Zhi Meng Guo
Effects of Additives on Semiconduction Transformation in Lead Zirconate Titanate Ceramic Induced by
Atomic Hydrogen
Li Bin Mo, Sen Chen, Dong Guo, Jiang Li Cao
A Method for Predicting the Onset and Expanding of the Damage during CFRP Interference-Fit Joining
Process
Chao Luan, Kai Fu Zhang, Xiao Ge Li, Yuan Li
Hysteretic Behavior of Steel Members Strengthened with CFRP under Cyclic Lateral Loading in Different
Temperature
Yi Heng Li, Zhen Guo Li
Superabsorbent Hydrogel from Sago Starch: The Effects of Crosslinking Agent on Thermal Stability and FTIR
Analysis
O. Nurizan, A. Zuraida, N. Norhuda Hidayah
Comprehensive Mathematical Model of Full Oxygen Blast Furnace and its Solution
Jia Le Meng, Zhan Cheng Guo, Hui Qing Tang
Microstructure and Mechanical Property along 3D Directions of AZ31 Magnesium Joint Welded by FSW
Sheng Lu, Shi Yu Xiao, Fang Qi, Jing Chen
Computational Aspects in the Elasto/Viscoplastic Material Behavior of Solids
Fabio de Angelis
Synthesis of Graphene-ZnS Nanosheets Composite by Layer-by-Layer Self-Assembly and Hydrothermal
Homogeneous Precipitation Method
Zong Hua Wang, Li Shun Bi, Jian Fei Xia, Fei Fei Zhang, Yan Zhi Xia, Yan Hui Li
Study of Tungsten Cathode Doped with Rare Earth for Pulsed Xenon Lam
Jian Jun Liu, Hai Bing Li, Rui Hua Wu, Ruo Yan Shao, Bao Cai Jiang
Harmonic Vibration Synchronization Analysis of the Double Motors Based on Equivalent Control
Synchronization Strategy
Xiao Hao Li, Jie Liu
Effect of Cooling Rate on Tensile Properties of Ti-5Al-5Mo-5V-3Cr Alloy
Yan Yan Fu, Song Xiao Hui, Wen Jun Ye, Xu Jun Mi
Flexural Properties of Kenaf Sandwich Panel
Halim Zahurin, Siti Khadijah Abdul Rahman
Research on the Thermal Performance of New Sandwich Insulation Composite Wall Panel
Shan Xia, Guang Hui Xia, Jian Hua Cui, Wan Yun Yin
Improvement and Function Characteristics of SiCCVD/Al Composite Electric Heating Actuators
Yun Lu, Liang Hao, Fu Sheng Pan, Mitsuji Hirohashi
Functionalization of ZnO Nanowires for Potential p-Nitrophenol Sensing Applications
Anurag Gupta, Bruce C. Kim, Eugene Edwards, Christina Brantley, Paul Ruffin
Simulation Study of the Strength of Pick Based on LS-DYNA in Different Hardness of Rock
Qiang Zhang, Shou Ju Li
A Solar Cell Based on a Hybrid Film of P3HT and Magic Cubic-Like PbS
Peng Wang, An Mei Wang, Zhen Hua Zhang, Li Bo Fan, Yan Lei, Meng Yuan Yang, Yan Ge Zhang, Pin Jiang Li
Carbide Distribution Effect on Wear Behavior of Cold Work Tool Steels
Liu Ho Chiu, Huan Chen Liao, Shou Chi Lin, Yeong Tsuen Pan, Horng Yih Liou
Construction of Flow Stress Constitutive Equation for 3Cr1Mo0.25V Steel
Yu Hua Zhang, Guang Yu Tan, Shu Cai Yang
Optimal Design of Tooth Profile for Sprocket Wheel on No Arching Sintering Machine
Su Bo Ren, Ming Hua Bai
The Research of Pt Heating Resistor Paste Used for Sensors Based on ZrO2
Hai Qin Huang, Ying Jun Pan, Xin He, Guang Yuan Xie, Zi Peng
Magnetic Studies in Mixed-Metal Valency Molecule Magnets NBu4Fe??nMn??1-n[Fe???(OX)3](n=0.03, 0.10,
0.15, 0.97)
Qing Lin, Shao Hong Chen, Yun He, Xiao Gang Li, Hai Fu Huang
From Waste to Electronics: Printed Circuit Boards Using Renewable Resources of Oil Palm Empty Fruit Bunch
Nor Aini Ahmad Zawawi, Alyani Ismail, Khalina Abdan, Mohd Adzir Mahdi
Numerical Algorithms for J2 Viscoplastic Models
Fabio de Angelis
Studying on Shielding Effect in the Sacrificial Anode Cathodic Protection System
Yi Huang, Zhi Gang Fang
M-T Transformation Control Synchronization Strategy for Single-Mass Nonlinear Harmonic Vibration System
Xiao Hao Li, Qun Chao Zhao
Ordering:
Order Online - http://www.researchandmarkets.com/reports/2303339/
Order by Fax - using the form below
Order by Post - print the order form below and send to
Research and Markets,
Guinness Centre,
Taylors Lane,
Dublin 8,
Ireland.
Page 1 of 2
Fax Order Form
To place an order via fax simply print this form, fill in the information below and fax the completed form to 646-607-1907 (from
USA) or +353-1-481-1716 (from Rest of World). If you have any questions please visit
http://www.researchandmarkets.com/contact/
Order Information
Please verify that the product information is correct and select the format(s) you require.
Product Name:
Metallurgy Technology and Materials
Web Address:
http://www.researchandmarkets.com/reports/2303339/
Office Code:
SCE1FL2D
Product Formats
Please select the product formats and quantity you require:
Quantity
Hard Copy
(Paper back):
USD 116 + USD 29 Shipping/Handling
CD-ROM:
USD 116 + USD 29 Shipping/Handling
Electronic (PDF):
USD 116
* Shipping/Handling is only charged once per order.
Contact Information
Please enter all the information below in BLOCK CAPITALS
Title:
First Name:
Mr
Mrs
Dr
Miss
Last Name:
Email Address: *
Job Title:
Organisation:
Address:
City:
Postal / Zip Code:
Country:
Phone Number:
Fax Number:
* Please refrain from using free email accounts when ordering (e.g. Yahoo, Hotmail, AOL)
Ms
Prof
Page 2 of 2
Payment Information
Please indicate the payment method you would like to use by selecting the appropriate box.
Pay by credit card:
You will receive an email with a link to a secure webpage to enter your
credit card details.
Pay by check:
Please post the check, accompanied by this form, to:
Research and Markets,
Guinness Center,
Taylors Lane,
Dublin 8,
Ireland.
Pay by wire transfer:
Please transfer funds to:
Account number
833 130 83
Sort code
98-53-30
Swift code
ULSBIE2D
IBAN number
IE78ULSB98533083313083
Bank Address
Ulster Bank,
27-35 Main Street,
Blackrock,
Co. Dublin,
Ireland.
If you have a Marketing Code please enter it below:
Marketing Code:
Please note that by ordering from Research and Markets you are agreeing to our Terms and Conditions at
http://www.researchandmarkets.com/info/terms.asp
Please fax this form to:
(646) 607-1907 or (646) 964-6609 - From USA
+353-1-481-1716 or +353-1-653-1571 - From Rest of World