jpp
M E TA L
METAL SHELL SERIES DRY-MATE CONNECTORS
S H E L L
S E R I E S
D RY- M AT E
C O N N E C TO R S
I N T R O D U C T I O N
The well established jÉí~äpÜÉääpÉêáÉë (jpp) of connectors are designed to withstand full ocean depth pressure
and harsh environments, including offshore, exploration and military applications. Fully ruggedized for ease of
handling and deployment, this connector range is manufactured from 316 Stainless Steel as standard, with Glass
Reinforced Epoxy (GRE) inserts molded around gold plated electrical contacts, however optional materials are
available upon request including Monel™, Titanium, Aluminum and PEEK (Polyetheretherketone). This connector range is continually being up-graded, please contact pb^`lk for further information and availability.
AVA I L A B I L I T Y
Contact configurations are available in various shell sizes ranging from a single electrical contact or coax, through
to 156 contacts with options available for fiber optic and high voltage. The jpp range is pressure rated upto
20,000 psi (mated and potted) with a temperature range of -50 degrees to 100 degrees centigrade although pb^J
`lk is also able to offer glass sealed inserts for higher pressure and temperature ratings.
A P P L I C AT I O N S
The jpp series is used extensively throughout various industries for a variety of applications including: high
power motors, submersible pumps, SEM control units, cameras and lamps. The versatility of this connector
makes it suitable for systems that require multiple applications through a single interface, eg. power, signal and
optic.
T E S T I N G
The jpp range of connectors have been subjected to the following testing:Insulation Resistance: 15 Gohms @ 500 VDC.
Dielectric Withstanding: 1200 VAC with a maximum leakage of .1 mA.
pb^`lk’s
ENVIRONMENTAL
TESTING
CAPABILITY
Four hydrostatic pressure vessels capable of testing underwater components to 1,000 psi, 10,000 psi, 18,000
psi and 20,000 psi.
Connectors can be tested mated, or in an open face condition and tests can be performed in water or oil.
Electrical properties can often be monitored during the pressure cycling process.
Please contact pb^`lk for further information.
REV IX
- MSS 1 www.seaconworldwide.com
jpp
METAL SHELL SERIES DRY-MATE CONNECTORS
PA RT
N U M B E R
S Y S T E M
EXAMPLE:
MSSG - 2 - CCP - PBOF - R/A
Right Angle
Pressure Balanced Oil Filled (Optional)
CCP - Cable Connector Plug
BCR - Bulkhead Connector Receptacle
FCR - Flange Connector Receptacle
DSR - Dummy Sealing Receptacle
DSP - Dummy Sealing Plug
Number of Contacts
Shell Size (G,K,L,M,O,P,Q,S)
jpp Connector Series
G E N E R A L
I N F O R M AT I O N
COMPONENT
MATERIAL
CATEGORY
BULKHEAD BODY
(BCR/FCR)
316 Stainless Steel (or equivalent)
CCP BODY
316 Stainless Steel (or equivalent)
CONTACT INSERTS
Glass filled epoxy per MIL-M-24325
ELECTRICAL INSERTS
Copper alloy gold plated per MIL-G-45204
ENGAGING NUT
CA630 (or equivalent)
O-RINGS
Nitrile (formerly known as Buna N)
VALUE
MATED PRESSURE
Upto 20,000 psi mated and potted for standard
non-PBOF. 5,000 psi if not potted.
Upto 7,500 psi mated and potted for standard
PBOF. 2,500 psi if not potted.
OPEN FACE PRESSURE
Pressure ratings can be accomplished with most of
this range, but the connectors are not open face
rated as standard. Please contact pb^`lk for
further information.
VOLTAGE RATING
600 VDC as standard although higher voltage
versions are available. Please refer to the contact
configuration pages 11-16.
CURRENT RATING
Upto 200 amps dependent on contact size and
cable (see below for electrical contact sizes)
OPTIONS
Pressure Balanced Oil Filled (PBOF).
Higher Voltages.
Slip on assemblies (in-field termination).
Armored cable terminations.
Available in alternative materials; MonelTM, Titanium, Aluminum and PEEK. Please contact pb^`lk for further information.
E L E C T R I C A L
C O N TA C T
S I Z E S
CONTACT AWG
DIAMETER (INCHES)
AMPACITY (AMPS)
#28 AWG
0.015
0.5
#22 AWG
0.031
2.5
#20 AWG
0.040
4
#16 AWG
0.062
13
#14 AWG
0.093
16
#10 AWG
0.125
23
#8 AWG
0.156
50
#6 AWG
0.218
65
#4 AWG
0.255
90
#1/0 AWG
0.355
200
NOTE:
The ampacity is computed at temperature range of +30°F + 68°F. Above 70°F the ampacity drops.
Current ratings can be impacted by cable selection.
REV IX
- MSS 2 www.seaconworldwide.com
jpp
DIMENSION DETAILS
jbq^i pebii pbofbpEjppF
MSS-BCR
jpp Bulkhead Connector Receptacle
(Mates with MSS-CCP)
Dummy Connector: MSS-DSP
F
I
J
K
L
O
B
H’
P
G
F’
D’
H
A
N
E
D
M
C
G, K, L, M sizes have round keyway. O, P and Q
have square keyway. However, with the Aluminum
option all sizes have a square keyway. Refer to
pages 11-16 for contact configurations. G, K, L, M
Aluminum connectors will not mate with Stainless
Steel connectors.
PART DESCRIPTION
CONNECTOR SIZE
G
K
L
M
O
P
Q
A - DIAMETER (INCHES)
1.37
1.87
2.12
2.75
3.50
3.75
4.50
B - WRENCH FLATS
1.18
1.62
1.88
2.25
2.75
3.00
3.62
C - HEIGHT
1.50
2.00
2.00
2.25
2.25
2.25
2.25
D - SHOULDER
0.37
0.37
0.37
0.50
0.50
0.75
0.75
E - THREAD LENGTH
0.62
1.00
1.00
0.87
1.25
1.50
1.75
3/4 - 16UNF - 2A
1 - 14UNS - 2A
1 1/4 - 2UN - 2A
1 3/4 - 12UN - 2A
2 1/4 - 12UN - 2A
2 1/2 - 12UN - 2A
2 3/4 - 12UN - 2B
G - HEX NUT (ACROSS
FLATS INCHES)
1.2 X 0.25
1.50 X 0.37
1.75 X 0.25
2.25 X 0.50
3.00 X 0.50
3.25 X 0.50
3.75 X 0.50
H - DIAMETER
0.810 max
1.060 max
1.310 max
1.997 max
2.497 max
2.747 max
3.122 max
I - O-RING
2 - 017
2 - 21
2 - 122
2 - 224
2 - 228
2 - 230
2 - 233
J - O-RING
2 - 023
2 - 29
2 - 131
2 - 142
2 - 234
2 - 236
2 - 241
K - O-RING
2 - 016
2 - 118
2 - 122
2 - 126
2 - 225
2 - 227
2 - 230
L - O-RING
NONE
2 - 18
2 - 022
2 - 123
2 - 131
2 - 135
2 - 141
F - THREAD SIZE
M - WASHER
NONE
77 - 1 - 274
77 - 1 - 374
77 - 1 - 474
77 - 1 - 574
77 - 1 - 674
77 - 1 - 774
N - SPIROLOX RING
UR - 62
UR - 106
UR - 131
UR - 150
UR - 187
UR - 212
UR - 250
O - O-RING
2 - 016
2 - 23 - 70
2 - 027
2 - 128
2 - 225
2 - 227
2 - 230
P - O-RING
2 - 020
2 - 27 - 70
5 - 320
2 - 132
2 - 140
2 - 144
2 - 151
D’ - BORE DEPTH
0.380/min
0.380/min
0.380/min
0.520/min
0.520/min
0.520/min
0.770/min
F’ - BORED
0.750/min
0.995/min
1.250/min
1.750/min
2.250/min
2.500/min
2.750/min
3/4 - 16UNF - 2B
1 - 14NS - 2B
1 1/4 - 12UN - 2B
1 3/4 - 12UN - 2B
2 1/4 - 12UN - 2B
2 1/2 - 12UN - 2B
2 3/4 - 12UN - 2B
0.812/0.814
1.062/1.064
1.312/1.314
2.000/2.002
2.500/2.502
2.750/2.752
3.125/3.127
MOUNTING DIMENSIONS
THREADED
H’ - BORE DIAMETER
DIMENSIONS IN INCHES
NOTE:
For MSS-S connector details please contact pb^`lk.
REV IX
- MSS 3 www.seaconworldwide.com
jpp
DIMENSION DETAILS
jbq^i pebii pbofbpEjppF
MSS-FCR
jpp Flange Connector Receptacle
Mates with CCP
Dummy Connector: MSS-DSP
A
Q
B
R
N
M
D
B
L
*
O
K
H’
P
J
E
F
G
F’
I
H
I’
G, K, L, M sizes have round keyway. O, P and Q have square
keyway. However, with the Aluminum option all sizes have a
square keyway. Refer to page pages 11-16 for contact
configurations. G, K, L, M Aluminum connectors will not mate
with Stainless Steel connectors.
PART DESCRIPTION
G, K, L, M, sizes have round keyway. O, P, and Q have square keyway.
NOTE: * 6 holes equally spaced.
CONNECTOR SIZE
G
K
L
M
O
P
Q
A - DIAMETER
2.12
2.62
3.00
3.87
4.50
4.75
5.25
B - HOLE CIRCLE
1.812
2.250
2.500
3.250
3.875
4.125
4.625
D - HEIGHT
1.68
2.00
2.00
2.26
2.26
2.26
2.26
E - HEIGHT
0.37
0.37
0.38
0.51
0.51
0.51
0.51
F - HEIGHT
0.37
0.37
0.37
0.48
0.48
0.48
0.75
G - HEIGHT
0.26
0.38
0.38
0.50
0.50
0.50
0.74
0.810 max
1.060 max
1.310 max
1.997 max
2.497 max
2.747 max
3.122 max
H - DIAMETER
I - DIAMETER
0.68
0.87
1.12
1.62
2.12
2.37
2.75
J - O-RING
2 - 017
2 - 021
2 - 122
2 - 224
2 - 228
2 - 230
2 - 233
K - O-RING
2 - 023
2 - 029
2 - 131
2 - 142
2 - 234
2 - 236
2 - 240
L - BOLT SIZE
3 / 16”
3 / 16”
1 / 4”
1 / 4”
3 / 8”
3 / 8”
3 / 8”
M - O-RING
2 - 016
2 - 23 - 70
2 - 027
2 - 128
2 - 225
2 - 227
2 - 230
N - O-RING
2 - 020
2 - 27 - 70
5 - 320
2 - 132
2 - 140
2 - 144
2 - 151
O - O-RING
NONE
2 - 18
2 - 022
2 - 123
2 - 131
2 - 135
2 - 141
P - O-RING
2 - 016
2 - 118
2 - 122
2 - 126
2 - 225
2 - 227
2 - 230
NONE
77 - 1 - 274
77 - 1 - 374
77 - 1 - 474
77 - 1 - 574
77 - 1 - 674
77 - 1 - 774
UR - 62
UR - 106
UR - 131
UR - 150
UR - 187
UR - 212
UR - 250
Q - WASHER
R - SPIROLOX RING
MOUNTING DIMENSIONS
DIMENSIONS IN INCHES
F’ - BORE DEPTH MIN
0.385/min
0.385/min
0.385/min
0.520/min
0.520/min
0.520/min
0.770/min
H’ - BORE DIAMETER
0.812/0.814
1.062/1.064
1.312/1.314
2.000/2.002
2.500/2.502
2.750/2.752
3.125/3.127
0.750/min
0.890/min
1.140/min
1.780/min
2.140/min
2.406/min
2.765/min
I’ - BORE MIN
NOTE:
For MSS-S connector details please contact pb^`lk.
REV IX
- MSS 4 www.seaconworldwide.com
jpp
DIMENSION DETAILS
jbq^i pebii pbofbpEjppF
MSS-CCP
jpp Cable Connector Plug, Straight
Mates with MSS-BCR/CCR/FCR
Dummy Connector: MSS-DSR
K
F
B
D
G, K, L, M sizes have round keyway. O, P and Q have square
keyway. However, with the Aluminum option all sizes have a
square keyway. Refer to pages 11-16 for contact configurations. G, K, L, M Aluminum connectors will not mate with
Stainless Steel connectors.
C
J
I
PART DESCRIPTION
CONNECTOR SIZE
G
K
L
M
O
P
Q
A - DIAMETER
B - O-RING
C - WASHER
D - SPIROLOX
E - ENGAGING NUT
1.37
1.09
1.87
2 - 017
77 - 1 - 261
UR - 87
1.22
2.12
2 - 021
77 - 1 - 373
UR - 112
1.22
2.50
2 - 024
77 - 1 - 473
UR - 137
1.87
3.00
77 - 1 - 573
UR - 162
1.87
3.25
2 - 131
77 - 1 - 673
UR - 187
1.87
3.87
2 - 137
14 - 979
UR - 225
1.87
F - LENGTH
5.3
6.0
6.0
10.5
10.5
10.8
11.5
3.0
3.5
77 - 1 - 148
3.25
3.5
77 - 1 - 248
3.25
4.50
77 - 1 - 348
4.7
6.7
77 - 1 - 448
5.3
7.8
77 - 1 - 548
5.3
7.8
77 - 1 - 648
6.0
9.6
77 - 1 - 748
5100 - 87
5100 - 112
5100 - 137
5100 - 162
5100 - 212
5100 - 237
5100 - 275
0.87
1.12
1.37
1.62
2.12
2.37
2.75
G - HEIGHT
H - HEIGHT
I - ENGAGING NUT
J - RETAINING RING
K - DIAMETER
jbq^i pebii pbofbpEjppF
MSS-CCP-R/A
G
jpp Cable Connector Plug, Right Angle
Mates with MSS-BCR/CCR/FCR
Dummy Connector: MSS-DSR
E
A
H
NOTE:
Dimensions in inches.
Refer to pages 11-16 for contact configurations.
MSS-G-CCP body is Glass Reinforced Epoxy. The nut is metal.
Connector does not come molded to cable unless specified.
For MSS-S connector details please contact pb^`lk.
REV IX
- MSS 5 www.seaconworldwide.com
jpp
DIMENSION DETAILS
jbq^i pebii pbofbpEjppF
MSS-CCR
INLINE RECEPTACLE
jpp Cable Connector Receptacle
Mates with MSS-CCP
Dummy Connector: MSS-DSP
C
B
A
CONTACT INSERT
G, K, L, M sizes have round keyway. O, P and Q have square keyway. Refer to
pages 11-16 for contact configurations. G, K, L, M Aluminum connectors will not
mate with Stainless Steel connectors.
PART DESCRIPTION
CONNECTOR SIZE
G
K
L
M
O
P
Q
A - DIAMETER
1.37
1.87
2.12
2.50
3.00
3.25
3.87
B - WRENCH FLAT
1.118
1.62
1.87
2.25
2.75
3.00
3.62
5.5
6.7
7.0
9.5
10.0
11.5
12.0
C - LENGTH
jbq^i pebii pbofbpEjppF
MSS-CCP-SC
STRESS CORE TERMINATION
For termination of cables with stranded wire rope mechanical members located in the center of the cable
Dummy Connector: MSS-DSR
H
H - Refer to chart on page 5.
NOTE:
For MSS-S connector details please contact pb^`lk.
REV IX
The stress core termination shown above can be accomplished in all the
jpp Series sizes with the exception of the MSS-G.
This type of termination will develop the full breaking strength of the electro
mechanical cable.
Strength is carried through CCP coupling nut and BCTR or CCR threads.
Connector bodies do not come molded to cables unless so specified when
ordering.
- MSS 6 www.seaconworldwide.com
jpp
TYPICAL STRESS CORE TERMINATIONS
2
3
1
CONCEPTUAL TERMINATION FOR
KEVLAR, CENTER CORE
3
2
1
CONCEPTUAL TERMINATION FOR
STEEL, DOUBLE ARMOR
3
2
1
CONCEPTUAL TERMINATION FOR
KEVLAR, OUTER BRAID
3
2
CONCEPTUAL TERMINATION FOR
STEEL, CENTER CORE
1 - Polyurethane.
2 - Overmold.
3 - Hard Potting Compound.
NOTE:
The above are typical strain termination solutions. We have facilities to bespoke stress terminations to specific customer cable requirements.
REV IX
- MSS 7 www.seaconworldwide.com
jpp
DIMENSION DETAILS
E
jbq^i pebii pbofbpEjppF
MSS-BCR-PBOF
D
jpp Bulkhead Connector Receptacle
Pressure Balanced Oil Filled
Mates with MSS-CCP-PBOF
C
A
F
B
NOTES:
The short pin in the CCP contact insert opens the check valve in the CCP assembly when mated, thus accomplishing complete pressure balancing, completely eliminating the pistoning effect of conductors during pressurization.
Tubing stems are designed to fit standard tubing sizes.
Pressure Balanced Oil Filled Series
The unique valve assembly allows oil into the connector interface area when mated and seals when unmated.
CONNECTOR
A - THREAD
B - DIAMETER
(INCHES)
C - LENGTH
(INCHES)
D - LENGTH
(INCHES)
E - LENGTH
(INCHES)
F - DIAMETER
(INCHES)
MSSK-BCR-PBOF*
1-1/4NS-2A
1.87
2.0
0.375
1.00
1.060
MSSL-BCR-PBOF
1-1/4-12 UN-2A
2.12
2.0
0.375
1.00
1.310
MSSM-BCR-PBOF
1-3/4-12 UN-2A
2.75
2.25
0.500
0.870
1.997
MSSO-BCR-PBOF
2-1/4-12 UN-2A
3.50
2.25
0.500
1.250
2.497
MSSP-BCR-PBOF
2-1/2-12 UN-2A
3.75
2.25
0.500
1.500
2.747
MSSQ-BCR-PBOF
2-3/4-12 UN-2A
4.50
2.25
0.750
1.750
3.122
* These parts are standard and require no set-up charge.
Parts where no asterix appears may require set-up charges and have longer deliveries.
Refer to pages 11-18 for available contact configurations.
SPECIFICATION:
BODY MATERIAL: 316 Stainless Steel.
INSERT: Glass Reinforced Epoxy.
CONTACTS: Brass, gold plated.
PRESSURE RATING: 7,500 psi (2,500 psi or more requires the BCR to be back potted or pressure balanced on solder cup side of insert).
REV IX
- MSS 8 www.seaconworldwide.com
jpp
DIMENSION DETAILS
jbq^i pebii pbofbpEjppF
MSS-CCP-PBOF
jpp Cable Connector Plug
Pressure Balanced Oil Filled
Mates with MSS-BCR/MSS-CCR-PBOF
TUBING SYSTEM
(Tubing not supplied with parts unless specified)
OIL FILLED
PORT
D
C
B
A
CONNECTOR
A - DIAMETER
(INCHES)
B - LENGTH
(INCHES)
C - DIAMETER
(INCHES)
D - DIAMETER
(INCHES)
E - LENGTH
(INCHES)
F - R/A HEIGHT
(INCHES)
MSSK-CCP-PBOF
1.87
3.00
0.672
0.48
2.37
2.12
MSSL-CCP-PBOF
2.12
3.75
0.844
0.62
2.82
2.56
MSSM-CCP-PBOF
2.50
5.00
0.844
0.62
3.26
3.00
MSSO-CCP-PBOF
3.00
5.81
1.000
0.62
3.50
3.75
MSSP-CCP-PBOF
3.25
6.62
1.000
0.82
3.37
3.75
MSSQ-CCP-PBOF
3.87
7.00
1.250
1.06
4.19
4.12
jbq^i pebii pbofbpEjppF
MSS-CCP-PBOF-R/A
E
jpp Cable Connector Plug
Pressure Balanced Oil Filled
Mates with MSS-BCR/MSS-CCR-PBOF
OIL FILLED
PORT
F
A
SPECIFICATION:
BODY MATERIAL: 316 Stainless Steel.
NUT: Bronze.
INSERT: Glass Reinforced Epoxy.
CONTACTS: Brass, gold plated.
PRESSURE RATING: 7,500 psi.
REV IX
TUBING SYSTEM
- MSS 9 www.seaconworldwide.com
jpp
DIMENSION DETAILS
jbq^i pebii pbofbpEjppF
MSS-DSR
jpp Dummy Sealing Receptacle
B
(Ø A)
CONNECTOR SIZE
PART
DESCRIPTION
C
D
G
K
L
M
O
P
Q
S
A - DIAMETER
1.37
1.87
2.12
2.50
3.00
3.25
3.87
4.62
B - LENGTH
1.25
1.50
1.50
2.00
2.00
2.00
2.12
2.12
C - O-RING
2-020
2-027
5-320
2-132
2-140
2-144
2-151
2-153
D - O-RING
2-016
2-023
2-027
2-128
2-225
2-227
2-230
2-236
NOTE:
MATERIAL: 316 Stainless Steel.
Other materials available on request.
jbq^i pebii pbofbpEjppF
MSS-DSP
jpp Dummy Sealing Plug
B
E
D
(Ø C)
CONNECTOR SIZE
PART
DESCRIPTION
G
K
L
M
O
P
Q
S
A - DIAMETER
1.37
1.87
2.12
2.50
3.00
3.25
3.87
4.62
B - LENGTH
1.56
1.56
1.56
2.37
2.37
2.37
2.37
2.37
C - DIAMETER
0.87
1.12
1.37
1.62
2.12
2.37
2.75
3.50
D - ENGAGING
77-2-120 77-2-220 77-2-320 77-2-420 77-2-520 77-2-620 77-2-720 77-2-920
NUT
E - RETAINING
5100-87
RING
F - WASHER
F
(Ø A)
5100-112 5100-137 5100-162 5100-212 5100-237 5100-275 5100-350
77-1-148 77-1-248 77-1-348 77-1-448 77-1-548 77-1-648 77-1-748 77-1-948
NOTE:
MATERIAL: 316 Stainless Steel with a CA630 engaging nut, however the material
for the MSSG is GRE (Glass Reinforced Epoxy) with a CA630 engaging nut.
Other materials available on request.
REV IX
- MSS 10 www.seaconworldwide.com
jpp
CONTACT CONFIGURATIONS
jpp SERIES CONTACT CONFIGURATIONS
SIZE
G
#22/20 ohm COAX
#22/20 ohm COAX
2#14
3#16
1#2
4#16 *
2#10
6#16
2#16
7#16
3#22/20 ohm COAX
3#14
7#20 *
4A#16
K
1#16/3#14 *
(4)
10#16
2#22/20 ohm COAX
4#16 (6)
12#20
6#16 *
6#16
(WITH BOOT)
12#20
(PBOF)
7#16
12S#20
8#16 *
8#20 *
16#20
1#1/0
2#8
2A#6 HV
3#10 *
3A#8 *
4#8
4A#16 HV
6#16 *
6A#10
6B#16
8#16
8#16
(PBOF)
12#16
12B#16
(PBOF)
12S#16
16#20 *
5#20/11#16
(16A)
18#16
18A#20
2#10/16#20
(18B)
1#4/2#14
(3B)
2#22/20 ohm COAX
2#10/3#16 (7)
L
NOTES:
All configurations shown are the face view of the receptacle connector (BCR/FCR/CCR).
This symbol refers to the receptacle shell keyway which keys the BCR, FCR, CCR shell to the mating CCP shell.
PBOF is the abbreviation for pressure balanced oil filled style connectors, reference catalog for more information.
* Upon request, these configurations are also available with the PBOF option.
REV IX
- MSS 11 www.seaconworldwide.com
4#10/8#20
(12A)
22#20 *
jpp
CONTACT CONFIGURATIONS
jpp SERIES CONTACT CONFIGURATIONS
SIZE
L
9#16/13#20
2#8 HV
3#6/3#16 *
(6)
26#20 *
26#20 SP
3#10 *
4#8 *
6#14 *
30#20
38#22
4#8 HV *
5#6 *
6#10 HV *
10#14
2#16/9#10
(11)
7#10
8#14
16#16
18#16
21#16 *
30#20 *
37#20
76#22
M
3#8/12#16
(15)
28#16
40#20 *
22#16
(PBOF)
22#16
42#20
56#20
O
3#4
4#6 *
7#8
8#16
NOTES:
All configurations shown are the face view of the receptacle connector (BCR/FCR/CCR).
This symbol refers to the receptacle shell keyway which keys the BCR, FCR, CCR shell to the mating CCP shell.
PBOF is the abbreviation for pressure balanced oil filled style connectors, reference catalog for more information.
* Upon request, these configurations are also available with the PBOF option.
REV IX
- MSS 12 www.seaconworldwide.com
10#10
jpp
CONTACT CONFIGURATIONS
SIZE
jpp SERIES CONTACT CONFIGURATIONS
4#22/20 ohm COAX
6#16 (10)
16#16
22#16
9#16/17#14
(26)
30#14
31#14
31#16
44#20 *
78#20
84#20
30#16 *
O
1#1/0
2#1/0
3#1/0
3#8 *
48#20
3#14 HV
(6000 VAC)
P
5#8 *
2#16/4#16
(6)
4#16/3#8 *
(7)
2#16/5#16 *
(7)
NOTES:
All configurations shown are the face view of the receptacle connector (BCR/FCR/CCR).
This symbol refers to the receptacle shell keyway which keys the BCR, FCR, CCR shell to the mating CCP shell.
PBOF is the abbreviation for pressure balanced oil filled style connectors, reference catalog for more information.
* Upon request, these configurations are also available with the PBOF option.
REV IX
- MSS 13 www.seaconworldwide.com
6#6/2#14
(8)
jpp
CONTACT CONFIGURATIONS
jpp SERIES CONTACT CONFIGURATIONS AVAILABLE
SIZE
3#4/6#16
(9)
3#16/7#16
(10)
6#8/4#16
(10)
16#16/8#10
(24)
24#16/4#10
(28)
38#16 *
60#16
60#20
14#16/5#8
(19)
20#14
P
3#1/0 *
Q
4#1/0 *
3#4/1#10 HV *
(4)
5#6
40#16
4A#6 *
4B#2/0 *
1#8/4#2/0
(5A)
12#6/2#14
(14)
NOTES:
All configurations shown are the face view of the receptacle connector (BCR/FCR/CCR).
This symbol refers to the receptacle shell keyway which keys the BCR, FCR, CCR shell to the mating CCP shell.
PBOF is the abbreviation for pressure balanced oil filled style connectors, reference catalog for more information.
* Upon request, these configurations are also available with the PBOF option.
REV IX
- MSS 14 www.seaconworldwide.com
48#16 *
jpp
CONTACT CONFIGURATIONS
jpp SERIES CONTACT CONFIGURATIONS AVAILABLE
SIZE
3#8/15#16 *
(18)
9#8/4#16/12#20
(25A)
6#10/18#16
(24A)
3#4/15#10/12#16
(30)
8#10/16#16
(24)
3#10/1#14/31#16
(35)
25#16 *
2#22/20 ohm COAX
6#10/28#16 (36)
Q
15#14/21#20 HV
(36)
10#10/45#16
(55)
12#10/17#14/20#16
(49)
10#10/45#16
(55A)
12#10/38#16
(50)
6#8/8#10/36#16 *
(50A)
60#16 *
56#14/4#16/9#20
(69)
NOTES:
All configurations shown are the face view of the receptacle connector (BCR/FCR/CCR).
This symbol refers to the receptacle shell keyway which keys the BCR, FCR, CCR shell to the mating CCP shell.
PBOF is the abbreviation for pressure balanced oil filled style connectors, reference catalog for more information.
* Upon request, these configurations are also available with the PBOF option.
REV IX
- MSS 15 www.seaconworldwide.com
jpp
CONTACT CONFIGURATIONS
jpp SERIES CONTACT CONFIGURATIONS AVAILABLE
SIZE
2#22/20 ohm COAX
11#16/69#20 (82)
84#16 *
84A#20
85#16
104#16
41#16/69#20
(110)
Q
88#16 *
3#10/13#14/86#20
(102)
128#20 *
S
108#14
156#16
6#10/50#16/81#22
(137)
NOTES:
All configurations shown are the face view of the receptacle connector (BCR/FCR/CCR).
This symbol refers to the receptacle shell keyway which keys the BCR, FCR, CCR shell to the mating CCP shell.
PBOF is the abbreviation for pressure balanced oil filled style connectors, reference catalog for more information.
* Upon request, these configurations are also available with the PBOF option.
REV IX
- MSS 16 www.seaconworldwide.com
jpp
CONTACT CONFIGURATIONS
SIZE
jpp FIBER OPTIC SERIES CONTACT CONFIGURATIONS AVAILABLE
L
4FO-PBOF
M
4FO
4FO/8#16
4FO/8#16-PBOF
4FO/8#16
O
1FO/7#16
3FO/13#14/9#16
8FO
P
2FO/2#14/21#16
4FO/8#16
6FO/6#10
Q
6FO/4#10
8FO/4#10
8FO/6#10
NOTES:
For further information please see our dry-mate fiber optic section or contact pb^`lk.
REV IX
- MSS 17 www.seaconworldwide.com
8FO/8#10
jpp
SIZE
CONTACT CONFIGURATIONS
jpp FIBER OPTIC SERIES CONTACT CONFIGURATIONS AVAILABLE
S
3FO/5#10/5#14/5#16/20#20
8FO/6#6/7#10
NOTES:
For further information please see our dry-mate fiber optic section or contact pb^`lk.
REV IX
- MSS 18 www.seaconworldwide.com
jpp
CONTACT CONFIGURATIONS
jpp SERIES ‘SPECIALS’ AVAILABLE TO ORDER ONLY
SIZE
L
12#16
8FO/4#10
8FO/6#10
25#16/4#10
Q
6FO/12#12
8FO
S
16FO/4#8
48FO/4#8
NOTES:
For further information please see our dry-mate fiber optic section or contact pb^`lk.
REV IX
- MSS 19 www.seaconworldwide.com
HANDLING PROCEDURES AND SPECIAL CAPABILITIES
Even though these procedures appear simple, only qualified technicians should perform the installation and maintenance.
pb^`lk
1700 Gillespie Way,
El Cajon, California 92020, USA.
TEL: +1 (619) 562-7071
FAX: +1 (619) 562-9706
E-Mail: seacon@seaconworldwide.com
Website: www.seaconworldwide.com
INSTALLATION PROCEDURES
Torque values referenced assume installation into dry metal threads.
Bulkhead connector receptacle (BCR) o-ring should be lubricated with
an appropriate silicone grease before installing. This lubricant should
be applied to form an adequate film. Excessive lubrication is detrimental to the operation of the connector. Care must be taken to ensure no
grease or dirt is present on the face of the fiber optic contact. Cleaning
of the contact is recommended using only suitable products. CCP oring should be greased as above with the same care being taken.
pb^`lk US GULF AREA SALES OFFICE
14511 Old Katy Road, Suite 300,
Houston, Texas 77079, USA.
TEL: +1 (281) 599-3509
FAX: +1 (281) 599-3517
E-Mail: gulfcoastsales@seaconworldwide.com
Website: www.seaconworldwide.com
CARE AND MAINTENANCE
Once mated the connector requires no maintenance. When stored all
fiber contacts should be protected with suitable dust caps.
pb^`lk US EAST COAST SALES OFFICE
15 Gray Lane, Suite 108, Hopkinton Industrial Park,
Ashaway, Rhode Island 02804, USA.
TEL: +1 (401) 637-4952
FAX: +1 (401) 637-4953
E-Mail: eastcoastsales@seaconworldwide.com
Website: www.seaconworldwide.com
CABLE AND CONTINUITY PRESERVATION
Avoid sharp bends in cables. Cables subjected to vibration or exposed
to seawater drag should be adequately clamped to prevent conductor
fatigue infringing cable minimum bend radius and ultimate failure.
pb^`lk ADVANCED PRODUCTS, LLC
1321 Nelius Road, P.O. Box 767,
Bellville, Texas 77418, USA.
TEL: +1 (979) 865-8846
FAX: +1 (979) 865-8859
E-Mail: sales@seacon-ap.com
Website: www.seacon-ap.com
SPECIAL ASSEMBLIES
pb^`lk maintains all facilities necessary to furnish complete underwater and environmental electrical connector/cable systems, including
Research and Development, Engineering, Manufacturing, Quality
Control and Pressure Testing. As well as supplying our standard ‘offthe-shelf’ items, we have the capability to design and manufacture
SPECIAL CUSTOMIZED CONNECTORS AND CABLE ASSEMBLIES
to suit your individual needs.
pb^`lk BRAZIL
Rua Conde de Bonfim 120 sala 212, Tijuca,
Rio de Janeiro, Brazil, CEP: 20520-053.
TEL: +55 (11) 2103-6262
CELL: +55 (21) 9-7626-6062
E-mail: adalberto.bromberg@te.com
Website: www.seaconworldwide.com
pb^`lk (europe) LTD
Seacon House, Hewett Road, Gapton Hall Industrial Estate,
Great Yarmouth, Norfolk, NR31 0RB, UK.
TEL: +44 (0) 1493-652733
FAX: +44 (0) 1493-652840
E-Mail: sales@seaconeurope.com
Website: www.seaconeurope.com
pb^`lk GLOBAL PRODUCTION
Callejon Terrazos #8, Local 2-C, Las Brisas 1ra. Seccion,
Tijuana, B.C., Mexico C.P. 22610.
TEL: +52 (664) 626-2726
FAX: +52 (664) 686-8922
E-Mail: sales@seaconglobal.com
Website: www.seaconglobal.com
Dial from U.S.A. TEL: +1 (619) 308-7901
TOLL FREE: (888) 562-7072
FAX: +1 (619) 308-7900
pb^`lk PHOENIX
15 Gray Lane, Suite 108, Hopkinton Industrial Park,
Ashaway, Rhode Island 02804, USA.
TEL: +1 (401) 637-4952
FAX: +1 (401) 637-4953
E-Mail: sales@seaconphoenixllc.com
Website: www.seaconphoenix.com
All reasonable efforts have been taken to ensure that the information contained herein is
accurate at the date of publication, but no representation or warranty as to the accuracy or
completeness of such information is intended or to be implied by its inclusion herein. Any and
all representations and warranties pertaining to the information and products referred to
herein shall be set forth in pb^`lk standard sales order form. In addition, pb^`lk
reserves the right to make changes to the contents hereof without notice, therefore it is
suggested that at the time of inquiry, the appropriate sales office or factory be contacted
directly for verification of published specifications and products availability.
© 2014 pb^`lk
ALL RIGHTS RESERVED
REV IX