HST100 Series - Acuity Brands

advertisement
Project:
Type:
HST100 Series
Qty:
OR/Surgical Suite
S PECIFICATIONS
OR / S urgic a l Su i t e
HST1
SPECIFICATIONS
Surgical troffers are designed to supplement the primary procedure lighting in the surgical theater. When grouped to surround the perimeter of the operating table, the symmetric/asymmetric lens distributes light
both downward and toward the surgical field, diminishing shadows and reducing eyestrain of the surgical team. A gasketed steel door with clean concealed hinge seals plenum contaminates from the surgical suite.
For row-mounted flange applications, row mount adapters are offered and end flanges may be conveniently removed to allow fixtures to be fastened to one another. Fixture is entirely serviceable from within the room.
Construction
18 GA CRS Housing and Door (16 GA Aluminum
Door optional)
Polyester powder coat finish; anti-microbial
powder coat finish available
Door
Sealed door with concealed hinge
Integrated silver grounding grid shield embedded
in acrylic panel
Clear sanitary lens (1/8” thick acrylic) protects
KSH-34 (ASD option) or KSH-12 (SYD option)
acrylic panel
Source
T8, T5, or T5HO
Ballast
T8 – Electronic instant start standard,
programmed rapid start
T5 & T5HO – Electronic program rapid start
Radio frequency suppressors added to shield
emissions
*See below for optional ballast*
Weight
HST124 – approximately 60 lbs shipping weight
HST122 – approximately 33 lbs shipping weight
HST114 – approximately 31 lbs shipping weight
Voltage
120V, 277V, 347V, MVOLT
3/8" Threaded Rod
(By Others)
22 ½"
Light Output
HST124 6T8 with ASD All-On: 8,700 lm
HST122 6T8 with ASD All-On: 4,000 lm
HST114 3T8 with SYD All-On: 3,540 lm
17"
2"
3"
Housing Height
Input Watts
HST124 6T8 with ASD All-On: 160 W
HST122 6T8 with ASD All-On: 87 W
HST114 3T8 with SYD All-On: 89 W
Flange Width
Flange Length
HST124/HST122
Dimming
Dimming ballast to be specified by customer
Grid Mounting
3/8" Threaded Rod (By Others)
10 ½"
Secure For Plenum With
Tie Wire (By Others)
Life Estimate
For lamp life, see Lamp Manufacturer’s
information.
Housing
Length
7"
Housing Height
Warranty
1-year limited warranty. Complete warranty
terms located at: www.AcuityBrands.com/
CustomerResources/Terms_and_Conditions.aspx
3"
Fixture
HST124 GRID
HST124 FLANGE
HST122 GRID
HST122 FLANGE
HST114 GRID
HST14 FLANGE
Switching
Multi switch legs available from single branch
circuit
*Circuit options shown in Switchleg Options
table*
2"
Flange Length
Flange Width
Flange Mounting
HST114
Actual performance may differ as a result of
end-user environment and application.
Emergency Battery Pack (optional)
1 or 2 lamp Emergency lighting available for T8
1 Lamp Emergency lighting available for T5
and T5HO
*Light output varies by Emergency ballast type.
Consult ballast manufacturer.*
Housing
Length
Secure For Plenum With Tie Wire (By Others)
Housing
Height
4 1/8"
4 5/8"
Flange
Width
23 3/4"
24"
Housing
Length
48"
48"
Flange
Length
47 3/4"
49 1/2"
4 1/8"
4 5/8"
4 1/8"
4 5/8"
23 3/4"
24"
11 3/4"
12"
24"
24"
48"
48"
23 3/4"
25 1/2"
47 3/4"
49 1/2"
SWITCHLEG OPTIONS
Number of Lamps
6
4
3
1C (1DIM)
1
2C (1C/1DM or 2DIM)
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
2
2
1
1
2
2
1
3C (2C/1DM or 3DIM)
2
2
3
2
1
1
2
2
1
1
3
3
Not Available
Healthcare Lighting • (888) 834-5684 • www.healthcare-lighting.com
© 2015-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting” is a registered trademark of Acuity Brands Lighting. Products herein may be
covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 08/30/16
HST100
1
Project:
HST100
Type:
OR/Surgical Suite
Qty:
S PECIFICATIONS
OR / S urgic a l Su i t e
HST1
CATALOG NUMBER
Example: HST124 F 120 ASD 6 T8 1C RM AM
Series
HST124
HST122
HST114
2x4 FT
2x2 FT
1x4 FT
Mounting
Voltage
G
F
120
277
MVOLT
347
Grid
Flange
Lens
120V
277V
120-277V
347V (Canada)
ASD
SYD
Asymmetrical Distribution
Symmetrical Distribution
Lamp Qty
Lamping
Switchlegs
6
4
3
T8
1C
2C
3C
1C/1DM
2C/1DM
1DIM
2DIM
3DIM
T5
T5H0
32W (4 FT)
17W (2 FT)
28W (4FT)
14W (2FT)
54W (4FT)
24W (2FT)
1 Switchleg
2 Switchlegs
3 Switchlegs
1 normal ballast; 1 dimming
2 normal ballast; 1 dimming
1 dimming
2 dimming
3 dimming
Ballast Options
Options
Emergency
Finish
GEB10RS
GEB10PS
DMHL3D
ADEZ
ADZT
PF
RM
RMP
GP1
GP2
GLR
GMF
ALD
BSD
PSD
TGC
B70A
I48
B501LP
B50
B301LP
B30
GW Gloss White (standard)
AM Anti-Microbial White
Generic Electronic Rapid Start
Generic Program Start
Lutron Hi-Lume
Mark X Dimmer 5-100% Phase Control
Mark VII Dimmer 0-10V Low Voltage
Dimmer
Plaster Frame Kit
Row Mount Adapter
Row Mount Pattern (specify pattern/consult factory)
One Green Lamp requires multi circuit (t8)
Two Green Lamps requires multi circuit (t8)
Fast-Blo Fuse
Slow-Blo Fuse
Aluminum Door Painted
Brushed Stainless Door
Painted Stainless Door
T-Grid Mounting Clips (T-grid only)
One Lamp Bodine
Iota1-2 lamp 350-700 lumens
Bodine 1 lamp emergency
Bodine 2 lamp emergency
Bodine 1 lamp emergency
Bodine 2 lamp emergency
Notes
1
2
3
4
5
6
7
8
9
If special ballast required, must specify 120 or 277 voltage.
1x4 is 3 lamps; 2x2 and 2x4 are 4 and 6 lamps.
Consult factory for availability of 347V.
T5HO not available with 6 lamps.
Row mount adapter; specify pattern. Adapters shipped with fixtures.
Non-standard wiring contact factory.
PF and RM only with flange mount.
T8 ballast standard instant start, T5 ballast standard program start.
I48 does not work with T5 or T5HO
PERFORMANCE DATA
Lumen Output
Lumen values are from photometric tests from an accredited laboratory. Data is considered to be representative of the configurations shown, within generally accepted industry tolerances.
Actual performance may differ as a result of end-user environment and application. Contact factory for performance data on any configurations not shown here.
Fixture
HST124 6T8 with ASD All-On
HST124 6T8 with ASD Outer Lamps On
HST124 6T8 with SYD Center Lamps On
Fixture
HST114 3T8 with SYD All-On
HST114 3T8 with SYD Outer Rows On
HST114 3T8 with SYD Center Rows On
Light
Output
8700 lm
5,840 lm
3,700 lm
Max
Candela
3,710 Cd
2,560 Cd
1,530 Cd
Input
Power
160 W
104 W
65 W
Light
Output
3,540 lm
2,740 lm
1,320 lm
Max
Candela
1,980 Cd
1,560 Cd
730 Cd
Input
Power
89 W
57 W
39 W
Fixture
HST122 6T8 with ASD All-On
HST122 6T8 with ASD Outer Rows On
HST122 6T8 with ASD Center Rows On
Light
Output
4,000 lm
2,700 lm
1,650 lm
Max
Candela
1,700 Cd
1,180 Cd
720 Cd
Input
Power
87 W
60 W
32 W
*Note: Reference for single lamp normal ballast:
One 4ft T8 Lamp ≈1700 lm; One 4ft T5 Lamp ≈1900 lm*
Actual performance may differ as a result of end-user environment or application
Healthcare Lighting • (888) 834-5684 • www.healthcare-lighting.com
© 2015-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting” is a registered trademark of Acuity Brands Lighting. Products herein may be
covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 08/30/16
HST100
2
Project:
HST100
Type:
OR/Surgical Suite
S PECIFICATIONS
Qty:
OR / S urgic a l Su i t e
HST1
PHOTOMETRICS
Test Report: LTL27605
HST124 6T8 with ASD All-On
Lumens: 8,709
Wattage: 160 W Efficiency: 50.9%
Max. Candela: 3,717 @ H: 22.5º; V: 2.5º
Illuminance at a Distance
Center Beam
Height
Footcandle
2.0
919.5 fc
4.0
229.9 fc
6.0
102.2 fc
8.0
57.5 fc
10.0
36.8 fc
Test Report: LTL27601
HST122 6T8 with ASD All-On
Lumens: 3,996
Wattage: 87 W Efficiency: 45.9%
Max. Candela: 1,709 @ H: 90º; V: 2.5º
Illuminance at a Distance
Center Beam
Height
Footcandle
2.0
423.0 fc
4.0
105.8 fc
6.0
47.0 fc
8.0
26.4 fc
10.0
16.9 fc
Test Report: LTL27620
HST122 6T8 with SYD All-On
Lumens: 4023
Wattage: 90 W Efficiency: 46.2%
Max. Candela: 1,874 @ H: 0º; V: 5º
Test Report: LTL27323
HST114 3T8 with SYD All-On
Lumens: 3,541
Wattage: 89 W Efficiency: 42.2%
Max. Candela: 1,989 @ H: 0º; V: 2.5º
Illuminance at a Distance
Center Beam
Height
Footcandle
2.0
466.3 fc
4.0
116.6 fc
6.0
51.8 fc
8.0
29.1 fc
10.0
18.7 fc
Illuminance at a Distance
Center Beam
Height
Footcandle
2.0
491.8 fc
4.0
122.9 fc
6.0
54.6 fc
8.0
30.7 fc
10.0
19.7 fc
Photometric data based on test results from an independent NIST traceable testing lab. IES data is available at www.healthcare-lighting.com. Always refer to our website for the latest IES file updates.
MOUNTING INFORMATION
Sheet Rock Cutout Dimensions
Hinge Side
Notes
• Secure fixture to the plenum (by others) [with tie wires or 3/8” threaded rod]. Tie wire
or threaded rods MUST BE USED to support the weight of the fixtures.
• Fixture cannot be supported by ceiling system alone (must be secured to plenum).
• Height of fixture can vary based upon options chosen (consult factory for details).
• Consult fixture Installation Instructions for more details.
• Fixture designed for hinge side bracket to face away from bed (or surgical table).
• Consult fixture installation instructions for specific row mounting instructions. All
fixtures in a row must have hinge bracket side facing away from bed. For RM and RMP
options cutout dimensions will change.
• It is the responsibility of the person installing the light fixture to ensure that the
materials, hardware and building structural members that are selected will support the
light fixture(s) and that they meet all applicable building and safety codes.
• Swing arm brackets are NOT available for the HST1 series of products.
• For row mounting the end flanges can be removed and a row mount adapter can be
added to create a tight seal between the fixtures. For row mounting, the PF option can
ONLY be used with the RM or RMP adapter hardware
Hinge Side
48 1/2"
24 1/2"
22 7/8"
22 7/8"
HST124 Flange
HST122 Flange
Hinge Side
48 1/2"
10 7/8"
HST114 Flange
*For more mounting information and detailed views please read the installation instructions*
Healthcare Lighting • (888) 834-5684 • www.healthcare-lighting.com
© 2015-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting” is a registered trademark of Acuity Brands Lighting. Products herein may be
covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 08/30/16
HST100
3
Download