C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 1
SECTION C
1850 Wilson Avenue, Toronto,
Ontario, Canada, M9M 1A1
Ph: 416-741-7336 Fax: 416-741-9104
COMPACT
FLUORESCENT
LAMPHOLDERS
C1
C2
C3-C5
C5-C11
C11-C12
C12-C17
C17-C19
C20-C21
C22-C23
Etlin-Daniels reserves the right to discontinue, modify designs and change specifications without incurring obligation.
While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct,
no warranty is given in respect thereof and the company shall not be liable for any error herein.
Copyright © 2012 Etlin-Daniels
COMPACT FLUORESCENT LAMPHOLDERS
Compact Fluorescent Lampholders
Compact Fluorescent Lamp Shapes and Bases
G23/GX23
G24/GX24, G24-d/GX24-d; G24-q/GX24-q
2G7 Base
2G11 Base
Compact Fluorescent Lampholder Accessories
Compact Fluorescent Self Ballasted Lampholders
GU-24 Compact Fluorescent Lampholders
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 2
Compact
Fluorescent
Compact Fluorescent
C2
COMPACT FLUORESCENT
LAMP SHAPES & LAMP BASES
COMPACT FLUORESCENT LAMP SHAPES
G23
GX-23
G23-2
G24-d
GX32-d
G24-q
GX24-q
2G7
2GX7
2G11
GX24-d
GX24-q
COMPACT FLUORESCENT LAMP BASES
2 Pin Lamps
G23
G23-2
GX23
5/7/9W
5/7/9W
13W
GX23-2 G/GX24d-1 G/GX24d-2 G/GX24d-3 GX32d-2 GX32d-3
13W
13W
18W
26W
22W
28W
4 Pin Lamps
G24q-1
G24q-2
G24q-3
GX24q-3
G24q-4
GX24q-4
GX24q-5
GX24q-6
13W
18W
26/32W
26/32W
42W
42W
57W
70W
2G7
2GX7
2G11
5/7/9W
13W
18/24/36/40/55W
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 3
G-23
GX-23
COMPACT FLUORESCENT LAMPHOLDERS
®
CF79-HSI Horizontal Bottom Snap-In Mount
CF13-HSI Horizontal Bottom Snap-In Mount
C
®
G-23
7W
GX-23
13W
C
0.77" (19.50)
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin, stripped 7⁄16"
• Snap-in mount into 0.025-0.040"
(0.6 - 1 mm) panel thickness
0.39"
(9.9)
PANEL CUTOUT
1.35" (34.30)
• Each wiring port accepts 2 wires
for easy harness wiring, no extra
jumpers or wire nuts to assemble
• Rated 75W, 600V
• cCSAus Certified / cULus Listed
®
CF79-HSI15 5/7/9W Horizontal Snap-In Mount, 15° Angle
CF13-HSI15 13W Horizontal Snap-In Mount, 15° Angle
C
US
®
32.53 (1.28)
G-23
7W
GX-23
13W
C
0.77" - 0.79"
(19.6 - 20.1)
0.39"
(9.9)
25.5 (1.0)
17.53 (0.69)
32.0 (1.26)
9.55 (0.38)
19.5 (0.77)
US
PANEL CUTOUT
34.3 (1.35)
9.90 (0.39)
• For twin or quad tube lamps
• White polycarbonate body
• Metal spring clip for positive lamp
retention
• Socket is angled 15°
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 7⁄16"
• Rated 75W, 600V
• Snaps into 0.025 – 0.040"
(0.6 – 1 mm) panel thickness
• Each wiring port accepts 2 wires for
easy harness wiring, no extra jumpers
or wire nuts to assemble
• cCSAus certified / cULus listed
®
CF79-HSM Horizontal Bottom Screw Mount
CF13-HSM Horizontal Bottom Screw Mount
C
®
• For twin or quad tube lamps
• High strength thermoplastic body
• Metal spring clip for positive lamp
retention
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin, stripped 7⁄16"
• Snap-in mount into 0.025-0.040"
(0.6 - 1 mm) panel thickness
• Each wiring port accepts 2 wires
0.91" (23.11)
0.95" (24.13)
0.09" (2.30)
1.16" (29.50)
13W
0.17" (4.32)
C
0.41" (10.41)
1.00" (25.4)
0.69" (17.53)
1.28" (32.53)
1.35" (34.30)
7W
GX-23
0.34" (8.64)
G-23
1.28" (32.50)
US
US
0.950"
(24.1)
0.180"
(4.5)
PANEL CUTOUT
for easy harness wiring, no extra
jumpers or wire nuts to assemble
• Rated 75W, 600V
• cCSAus Certified / cULus Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
0.38" (9.55)
0.39" (9.90)
0.04" (1.00)
US
0.77" - 0.79"
(19.6 - 20.1)
1.00" (25.40)
0.69" (17.53)
1.28" (32.5)
1.26" (32.00)
• For twin or quad tube lamps
• High strength thermoplastic body
• Metal spring clip for positive lamp
retention
C3
US
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 4
G-23
GX-23
C4
COMPACT FLUORESCENT LAMPHOLDERS
®
CF79-VSI 5/7/9W Vertical Base Snap-In Mount
CF13-VSI 13W Vertical Base Snap-In Mount
C
US
®
G-23
GX-23
9W
13W
C
US
0.35"
0.225"
• For twin or quad tube lamps
• White polycarbonate body
• Metal spring clip for positive lamp
retention
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 7⁄16"
• Rated 75W, 600V
• Bottom snap-in mount into panel of
0.030 – 0.067" (0.8 – 1.7 mm)
thickness
• Two wire terminals per wire port
• cCSAus certified / cULus listed
®
CF79-VSM 5/7/9W Vertical 4 Hole Screw Mount
CF13-VSM 13W Vertical 4 Hole Screw Mount
C
US
®
G-23
GX-23
9W
13W
C
US
.155" Dia.
(3.9)
0.81" (20.6)
Compact Fluorescent
0.50"
1.39"
0.06"
PANEL CUTOUT
PANEL CUTOUT
1.00" (25.4)
• For twin or quad tube lamps
• White polycarbonate body
• Metal spring clip for positive lamp
retention
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 7⁄16"
• Rated 75W, 600V
CFGX23TLB
Metal Shell Lampholder for table Lamps
For G23 / GX23 2 pin base lamps
• Four holes on mounting plate for
fast, easy installation
• Each wiring port accepts 2 wires for
easy harness wiring
• cCSAus certified / cULus listed
®
C
G-23
US
13W
GX-23
NPSF1/8-27T.P.I
1.98"
(50.5mm)
1.35" (34.5mm)
• For twin or quad lamps
• Integral thermoplastic lampholder with
metal outer shell
• Metal spring for positive lamp
retention
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin,
stripped 71⁄ 6"
• Mounts on to 1⁄8” IPS pipe
• Available with set screw for better
hold on to pipe
• Each wiring port accepts 2 wires for
easy harness wiring, no extra jumpers
or wire nuts required to assemble
• Rated 75W, 600V
• cULus listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 5
G-23/GX-23
G24/GX24
COMPACT FLUORESCENT LAMPHOLDERS
C5
LCM-G23-LP-SC Metal Lamp Support Screw Mount
G-23
GX-23
0.4" (10.0)
0.726" (18.3)
0.09" dia. (2.2)
• Lamp support clip for G23 and GX23
base lamps
• Made from corrosion resistant spring
steel for long service life
CFG24-D
CF13G24-D1
CF18G24-D2
CF26G24-D3
• Single height stand off of 0.160”
(4.06mm)
• Screw mounts using one 0.210”
(5.4mm) hole in panel
• Two smaller holes can be used to add
anti rotation
Multi Wattage Non-Keyed Vertical 4 Hole Screw Mount
®
13W G/GX24-D1 Base Keyed Version
18W G/GX24-D2 Base Keyed Version
26W G/GX24-D3 Base Keyed Version
C
US
®
G24-d
GX24-d
13W
18W
26W
0.04" (1.00)
C
US
1.30" (33.00)
0.81" (20.6)
1.34" (34.00)
1.13" (28.80)
0.81" (20.60)
ø 0.16" (ø 4.00)
PANEL CUTOUT
0.15" Dia.
(3.8)
0.15" x 0.19"
(3.8 x 4.8)
1.00" (25.4)
1.39" (35.40)
1.00" (25.4)
• For 2 pin quad lamps in G24 or
GX24 base
• High strength polycarbonate body
• Metal spring clip for positive lamp retention
• Non-keyed accepts all lamp wattages,
stock one item instead of three
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin,
stripped 7⁄16"
CFG24-Q 13/18/26/32/42W Multi Wattage Non-Keyed
CF13G24-Q1 13W Keyed
CF42G24-Q4 42W Keyed
CF18G24-Q2 18W Keyed
CF57G24-Q5 57W Keyed
CF26G24-Q3 26W Keyed
CF70G24-Q6 70W Keyed
• Each wiring port accepts 2 wires for
easy harness wiring
• Four holes on base for secure mounting
• Rated 75W, 600V
•cCSAus Certified / cULus Listed
®
C
US
®
G24-q
GX24-q
13W
18W
26/32W
0.04" (1.00)
42/57/70W
C
US
1.30" (33.00)
1.39" (35.40)
0.81" (20.6)
1.34" (34.00)
1.13" (28.80)
0.81" (20.60)
ø 0.16" (ø 4.00)
PANEL CUTOUT
0.15" x 0.19"
(3.8 x 4.8)
0.15" Dia.
(3.8)
1.00" (25.4)
1.00" (25.4)
• For 4 pin quad lamps, electronically
ballasted, in G24 or GX24 base
• High strength polycarbonate body
• Metal spring clip for positive lamp retention
• Non-keyed accepts all lamp wattages,
stock one item instead of six
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin,
stripped 7⁄16"
• Each wiring port accepts 2 wires for
easy harness wiring
• Four holes on base for secure
mounting
• Rated 75W, 600V
• cCSAus Certified / cULus Listed
*Available in higher temperature material - 125C - Lexan 223R - ADD SUFFIX -223R to the part number
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
0.21" dia. (5.4)
1.0" (25.4)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 6
G24-q/d
GX24-q/d
CF13G24-Q1-TL 13W Rotary Lock version, Keyed Screw Mount
CF18G24-Q2-TL 18W Rotary Lock version, Keyed Screw Mount
CF26G24-Q3-TL 26/32W Rotary Lock version, Keyed Screw Mount
CF42G24-Q4-TL 42W Rotary Lock version, Keyed Screw Mount
CFG24-Q3/4-TL 26/32/42W Rotary Lock version, Keyed Screw Mount
®
C
US
®
C
G24-q
GX24-q
13W
LOCKED
18W
26/32W
US
42W
UNLOCK
Compact Fluorescent
6.20
10„0'
34.80
28.8
0.15" x 0.19"
(3.8 x 4.8)
0.15" Dia.
(3.8)
3.6
ø
0.81" (20.6)
PANEL CUTOUT
1
1.00" (25.4)
• For 2 pin quad lamps in G24 or
GX24 base
• High strength polycarbonate body
• Snaps securely into 18 or 20 ga. panel
• Greatly improves assembly time
• Metal spring clip for positive lamp retention
• Non-keyed accepts all lamp wattages,
stock one item instead of three
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin,
stripped 7⁄16"
29
11.0
33.0
.66
• Designed for High Vibration
applications where a CF lamp will be
used, such as drilling platforms,
mining, earthquake proof buildings.
• Rotate 10 degrees to lock and back
10 degrees to unlock
• Lamp is secure and will not fall out
due to patent pending design
CFG24-D-BSI Multi Wattage Snap-In Non-Keyed Version
CF13G24-D1-BSI 13W G/GX24-D1 Base Keyed Version
CF18G24-D2-BSI 18W G/GX24-D2 Base Keyed Version
CF26G24-D3-BSI 26W G/GX24-D3 Base Keyed Version
.00
32
• Each wiring port accepts 2 wires for
easy harness wiring
• Four holes on base for secure
mounting
• Rated 75W, 600V
•cCSAus Certified / cULus Listed
®
C
US
®
G24-d
GX24-d
13W
18W
26W
C
US
33.00 [1.299]
• For 2 pin quad lamps in G24 or
GX24 base
• High strength polycarbonate body
• Snaps securely into 18 or 20 ga. panel
• Greatly improves assembly time
• Metal spring clip for positive lamp
retention
20.60 [0.811]
29.00 [1.142]
32.20 [1.268]
0.56"
25.40 [1.000]
1.40"
6.58 [0.259]
28.80 [1.134]
1.50 [0.059]
4.00 [0.157]
11.40 [0.449]
0.06"
PANEL CUTOUT
4.00 [0.157]
0.36"
C6
COMPACT FLUORESCENT LAMPHOLDERS
39.90 [1.571]
• Non-keyed accepts all lamp wattages,
stock one item instead of three
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin,
stripped 7⁄16"
0.27"
• Each wiring port accepts 2 wires for
easy harness wiring
• Four holes on base for secure
mounting
• Rated 75W, 600V
•cCSAus Certified / cULus Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 7
G24-q/GX24-q
COMPACT FLUORESCENT LAMPHOLDERS
CFG24-Q-BSI Multi Wattage Snap-In Non-Keyed Version
CF13G24-Q1-BSI 13W Keyed CF42G24-Q4-BSI 42W Keyed
CF18G24-Q2-BSI 18W Keyed CF57G24-Q5-BSI 57W Keyed
CF26G24-Q3-BSI 26W Keyed CF70G24-Q6-BSI 70W Keyed
®
C
US
C7
®
G24-q
13W
GX24-q
18W
26/32W
42W
C
US
20.60 [0.811]
29.00 [1.142]
32.20 [1.268]
25.40 [1.000]
39.90 [1.571]
33.00 [1.299]
0.27"
• For 4 pin quad lamps, electronically
ballasted, in G24 or GX24 base
• High strength polycarbonate body
• Snaps securely into 18 or 20 ga. panel
• Greatly improves assembly time
• Metal spring clip for positive lamp
retention
• Non-keyed accepts all lamp wattages,
stock one item instead of six
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin,
stripped 7⁄16"
• Each wiring port accepts 2 wires for
easy harness wiring
• Four holes on base for secure
mounting
• Rated 75W, 600V
• cCSAus Certified / cULus Listed
*Available in higher temperature material - 125C - Lexan 223R - ADD SUFFIX -223R to the part number
CF13G24-Q1-BSI-TL 13W Rotary Lock version, Keyed Snap-In Mount
CF18G24-Q2-BSI-TL 18W Rotary Lock version, Keyed Snap-In Mount
CF26G24-Q3-BSI-TL 26/32W Rotary Lock version, Keyed Snap-In Mount
CF42G24-Q4-BSI-TL 42W Rotary Lock version, Keyed Snap-In Mount
CFG24-Q3/4-BSI-TL 26/32/42W Rotary Lock version, Keyed Snap-In Mount
®
C
US
®
C
G24-q
GX24-q
LOCKED
13W
18W
26/32W
US
42W
UNLOCK
10°„0'
0.36"
0.56"
1.40"
0.27"
• For 4 pin quad lamps, electronically
ballasted, in G24 or GX24 base
• High strength polycarbonate body
• Snaps securely into 18 or 20 ga. panel
• Greatly improves assembly time
• Metal spring clip for positive lamp retention
• Non-keyed accepts all lamp wattages,
stock one item instead of six
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin,
28.8
0.06"
38.9
PANEL CUTOUT
4.9
11.0
33.0
stripped 7⁄16"
• Designed for High Vibration
applications where a CF lamp will be
used, such as drilling platforms,
mining, earthquake proof buildings. • Rotate 10 degrees to lock and back
10 degrees to unlock
•
• Lamp is secure and will not fall out
due to patent pending design
34.8
• Each wiring port accepts 2 wires for
easy harness wiring
• Four holes on base for secure
mounting
• Rated 75W, 600V
• cCSAus Certified / cULus Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
4.00 [0.157]
11.40 [0.449]
0.36"
0.56"
1.50 [0.059]
1.40"
6.58 [0.259]
28.80 [1.134]
0.06"
PANEL CUTOUT
4.00 [0.157]
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 8
FL423V-D1 13W 2 Pin Horizontal 2 Hole Screw Mount
FL423V-D2 18W 2 Pin Horizontal 2 Hole Screw Mount
FL423V-D3 26W 2 Pin Horizontal 2 Hole Screw Mount
®
C
®
1.34" (34.00)
18W
0.87" (22.00)
1.52" (38.50)
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin or
solder dipped wire, stripped 3⁄8"
• Two wire ports per terminal to speed
harness wiring
Multi Wattage, Non-Keyed, 2 Hole Screw Mount
13W 4 Pin Horizontal 2 Hole Screw Mount
18W 4 Pin Horizontal 2 Hole Screw Mount
26/32W 4 Pin Horizontal 2 Hole Screw Mount
26/32/42W 4 Pin Horizontal 2 Hole Screw Mount
42W 4 Pin Horizontal 2 Hole Screw Mount
C
US
0.180" DIA
(4.5)
0.945"
(24)
PANEL CUTOUT
0.20" (5.10)
1.32" (33.50)
•
•
•
Two hole screw mount on base plate
Rated 75W, 600V
cCSAusCertified / cULus Listed
®
C
US
®
C
1.34" (34.00)
1.40" (35.30)
13W
GX-24
26/32W
0.92" (23.40)
1.01" (25.70)
0.87" (22.00)
1.52" (38.50)
1.21" (30.80)
18W
0.18" (4.50)
G-24
0.95" (24.00)
FL423V-Q
FL423V-Q1
FL423V-Q2
FL423V-Q3
FL423V-Q3/4
FL423V-Q4
26W
0.92" (23.40)
1.01" (25.70)
1.21" (30.80)
US
42W
0.180" DIA
(4.5)
PANEL CUTOUT
0.945"
(24)
1.32" (33.50)
0.20" (5.10)
• For 4 pin electronic ballasted quad
or triple tube lamps
• White Polycarbonate body, 110°C rated
• Metal spring clip for positive lamp
retention
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 3⁄8"
• Two wire ports per terminal to speed
•
•
•
harness wiring
Two hole screw mount on base plate
Rated 75W, 600V
cCSAus Certified / cULus Listed
*Available in higher temperature material - 125C - Lexan 223R - ADD SUFFIX -223R to the part number
FL423V-Q--BSI
FL423V-Q1-BSI
FL423V-Q2-BSI
FL423V-Q3-BSI
FL423V-Q3/4-BSI
FL423V-Q4-BSI
Multi Wattage, Non-Keyed, Snap In Mount
13W 4 Pin Horizontal Snap In Mount
18W 4 Pin Horizontal Snap In Mount
26/32W 4 Pin Horizontal Snap In Mount
26/32/42W 4 Pin Horizontal Snap In Mount
42W 4 Pin Horizontal Snap In Mount
®
C
US
®
C
G-24
13W
GX-24
18W
o3
4.0
29.0
9.5
5.0
7.5
26/32W
US
42W
20mm (0.393")
.0
6.8
0.6
10mm (0.787")
22.0
Compact Fluorescent
13W
GX-24
0.95" (24.00)
G-24
1.40" (35.30)
• For 2 pin quad lamps
• White Polycarbonate body
• Metal spring clip for positive lamp
retention
US
8.0
C8
COMPACT FLUORESCENT LAMPHOLDERS
0.18" (4.50)
G-24/ GX-24
11.5
• For 4 pin electronic ballasted quad
or triple tube lamps
• White Polycarbonate body, 110°C rated
• Metal spring clip for positive lamp
retention
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 3⁄8"
• Two wire ports per terminal to speed
33.8
•
•
•
PANEL CUTOUT
harness wiring
Snap In mount on base plate
Rated 75W, 600V
cCSAus Certified / cULus Listed
*Available in higher temperature material - 125C - Lexan 223R - ADD SUFFIX -223R to the part number
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 9
G24-q/d
GX24-q/d
COMPACT FLOURESCENT LAMPHOLDERS
FL423V-Q-45-BSI Multi Wattage, Non-Keyed, Snap In Mount
FL423V-Q1-45-BSI 13W 4 Pin Horizontal Snap In Mount
FL423V-Q2-45-BSI 18W 4 Pin Horizontal Snap In Mount
FL423V-Q3-45-BSI
26/32W 4 Pin Horizontal Snap In Mount
FL423V-Q3/4-45-BSI 26/32/42W 4 Pin Horizontal Snap In Mount
FL423V-Q4-45-BSI
42W 4 Pin Horizontal Snap In Mount
®
C
US
C9
®
C
G-24
GX-24
13W
18W
26/32W
US
42W
26.4 [1.039]
20mm (0.393")
]
99
34
.2
[1
[1
.3
33
39
]
22.51 [0.886]
9.7 [0.382]
• For 4 pin electronic ballasted quad
or triple tube lamps
• White Polycarbonate body, 110°C rated
• Metal spring clip for positive lamp
retention
0.6 [0.024]
PANEL CUTOUT
19.9 [0.783]
11 [0.433]
30.15 [1.187]
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 3⁄8"
• Two wire ports per terminal to speed
•
•
•
harness wiring
Snap In mount on base plate
Rated 75W, 600V
cCSAus Certified / cULus Listed
*Available in higher temperature material - 125C - Lexan 223R - ADD SUFFIX -223R to the part number
®
FL448-D 13/18/26W Non-Keyed 2 Pin Outer
Thread Screw Mount
C
US
®
.0)
G24-d
GX24-d
13W
18W
26W
C
US
3"
(28
ø0.14" (ø3.4)
0.91" (23.0)
1.16" (29.5)
1.1
0.59" (15.0)
.140" DIA
(3.5)
0.63" (16.0)
1.38" (35.0)
0.91" (23.0)
1.56" (40.0)
• For 2 pin quad lamps
• White high heat PC body
• Two hole screw mounting in base or
use snap-on caps to secure to
1
⁄8" IPS or 1⁄4" IPS pipe
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin or
solder dipped wire, stripped 3⁄8"
PANEL CUTOUT
• Metal spring clip for positive lamp
retention
• Rated 75W, 600V
• cCSAus Certified / cULus Listed
®
FL448-Q 13/18/26/32/42W Non-Keyed 4 Pin
Outer Thread Screw Mount
C
US
®
.0)
G24-q
GX24-q
13W
18W
26/32W
42W
C
US
3"
(28
ø0.14" (ø3.4)
0.91" (23.0)
1.16" (29.5)
1.1
0.59" (15.0)
.140" DIA
(3.5)
0.63" (16.0)
0.91" (23.0)
1.56" (40.0)
• For 4 pin electronically ballasted quad lamps
• White high heat PC body
• Two hole screw mounting in base or
use snap-on caps to secure to
1
⁄8" IPS or 1⁄4" IPS pipe
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin or
solder dipped wire, stripped 3⁄8"
1.38" (35.0)
PANEL CUTOUT
• Metal spring clip for positive lamp
retention
• Rated 75W, 600V
• cCSAus Certified / cULus Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
10mm (0.787")
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 10
G24-d
G24-q
Compact Fluorescent
C10
CFMNT-X
COMPACT FLUORESCENT LAMPHOLDERS
G24-d
G24-q
Horizontal Adapter Screw Mount
or Snap-In Mount
• Made from high strength polycarbonate
• Used to convert vertical CFG24 series socket to horizontal, with lamp oriented
at 45˚ to the plane
• Wire the socket and then simply snap the socket on to the mounted adapter
• Two locking ears hold both parts together
• CFMNT-1 and CFMNT-2 have four holes for screw mounting
• CFMNT-3 and CFMNT-5 snap into 0.025” panel thicknesses
• CFMNT-4 and CFMNT-6 snap into panel thicknesses ranging from
0.025” up to 0.067”
CFMNT-1
CFMNT-2
SCREW-IN MOUNT
CFMNT-3
*For 0.025” thick panels
SCREW-IN MOUNT
Use with triple tube lamps
CFMNT-4
SNAP-IN MOUNT
CFMNT-5
*For 0.025” - 0.067” thick panels
SNAP-IN MOUNT
CFMNT-6
Use with triple tube lamps.
Use with triple tube lamps
*For 0.025” thick panels
SNAP-IN MOUNT
*For 0.025” - 0.067” thick panels
SNAP-IN MOUNT
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
2
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 11
G24-q/d
2G7 / 2GX7
G24-q/d
2G7 / 2GX7
COMPACT FLUORESCENT LAMPHOLDERS
C11
FL448-CAP Insulating Snap-On Cap for FL448-X
FL448-RING Shade Holder Ring For FL448-X
ø1.48" (ø37.60)
ÿ44.00
ÿ5
1.24" (31.50)
0
15∞
ÿ45.00
0.10" (2.60)
1.07" (27.20)
• Snap-On Insulating Cap with
Anti-Rotation Slots
• Hole will accommodate 1⁄8" IPS pipe
• Use 2 jam nuts to secure in place
• White Threaded Shade Holder Ring
• Made from thermoplastic
• Use to secure shade to FL-448 Series
CFGX24-Q1TLB
Metal Shell Lampholder for Table Lamps
For G24 / GX24-Q1 4 pin base lamps
®
C
G24-q
GX24-q
US
13W
NPSF1/8-27T.P.I
1.98"
(50.5mm)
1.41" (36.0mm)
• For twin or quad lamps
• Integral thermoplastic lampholder with
metal outer shell
• Metal spring for positive lamp retention
• Quick connect push-in wire terminals for
CF2G7-HSI
CF2GX7-HSI
18 AWG Solid or Twist & Tin, stripped ⁄16"
• Mounts on to 1⁄8” IPS pipe
• Available with set screw for better
hold on to pipe
• Each wiring port accepts 2 wires for easy
7
harness wiring, no extra jumpers or wire
nuts required to assemble
• Rated 75W, 600V
• cULus Listed
®
2G7 5/7/9W Horizontal Snap In Mount
2GX7 13W Horizontal Snap In Mount
C
®
2G7
• Made from polycarbonate rated 125ºC
• Phosphor Bronze contacts
• Snaps into panel for faster assembly
time
• Quick connect push-in wire terminals
for 18 AWG solid or bonded Copper
wire, stripped 7/16”
• Fits into 20mm x 10mm panel cut out
US
2GX7
C
US
• Two wire ports per terminal
• Rated 75W 600V
• cCSAus approved and cULus listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
0.26" (6.60)
30∞
0.5
0.31" (8.00)
30∞
0.66" (16.70)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 12
C12
CF2G7-HSM
CF2GX7-HSM
2G7 / 2GX7
2G11
COMPACT FLUORESCENT LAMPHOLDERS
®
2G7 5/7/9W Horizontal Screw Mount
2GX7 13W Horizontal Screw Mount
C
®
2G7
•
•
•
•
Made from polycarbonate rated 110ºC
Phosphor Bronze contacts
Screw mounts into panel horizontally
Can be mounted using thread cutting
screws into the socket
CF2G7-VHSM
CF2GX7-VHSM
• Cutting screws go into (2) .125” holes
in socket
• Two wire ports per terminal
• Rated 75W 600V
• cCSAus approved and cULus listed
®
C
US
®
2G7
2GX7
C
US
0.19" (4.82)
1.20" (30.40)
0.31" (7.90)
1.26" (31.90)
0.156"
(3.96)
1.56" (39.62)
• Made from polycarbonate rated 110ºC
• Phosphor Bronze contacts
• Can be mounted either vertically or
horizontally on the panel
US
Ø 0.125"
(3.20)
2G7 5/7/9W Vertical Horizontal Screw Mount
2GX7 13W Vertical Horizontal Screw Mount
1.72" (43.80)
C
0.20" (5.00)
Ø 0.177"
(4.50)
1.27" (32.20)
0.69" (17.50)
2GX7
0.94" (24.00)
1.26" (31.90)
• Quick connect push-in wire terminals
for 18 AWG solid or bonded Copper
wire, stripped 7/16”
• Screw mounts into (2) .177” holes in
panel
0.62" (15.70)
• Quick connect push-in wire terminals
for 18 AWG solid or bonded Copper
wire, stripped 7/16”
• Screw mounts into (2) .156” holes in
panel
•
•
•
1.56" (39.62)
Two wire ports per terminal
Rated 75W 600V
cCSAus approved and cULus listed
®
286-SC 2G11 Horizontal Screw Mount
C
US
®
2G11
2.90" (73.7)
0.13" (3.3)
0.35" (8.9)
ø 0.15" (3.9)
0.65" (16.6)
2.52" (64.0)
1.78" (45.2)
0.36" (9.1)
C
US
TWO WIRE
PORTS PER
TERMINAL
0.57" (14.3)
0.61" (15.5) LAMP
1.13" (28.7)
Compact Fluorescent
1.72" (43.80)
US
0.97" (24.64)
2G7 / 2GX7
2G11
0.45" (11.56)
ROTATE TO
INSERT
LAMP
0.25" (6.35)
1.82" (46.2)
2.52" (64.0)
0.16" (4.1) SLOT
0.17" (4.3)
DIA TO
SUIT
FASTENERS
2.20" (55.9)
• Available only for Canadian Market
• White thermoplastic body
• Screw mount to panel using mounting ears
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 1⁄2"
• Two wire ports per terminal for
easy harness assembly
• 75W, 600V
• UL Listed & CSA Approved
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
2G11
2G11
COMPACT FLUORESCENT LAMPHOLDERS
®
CF2G11-HNB
2G11 Horizontal Without Base
CF2G11-HNB-S Shunted Version
C
C
1.32" (33.50)
0.30" (7.50)
• Quick connect push-in wire terminals for 18
AWG Solid or Twist & Tin or solder dipped
wire, stripped 3⁄8"
• Two wire ports per terminal for easier
wiring of multiple lampholder circuits
• 75W, 600V
• cCSAus Certified / cULus Listed
®
C
®
2G11
SHUNTED
0.94" (24.00)
1.02" (25.83)
1.02" (25.83)
UN-SHUNTED
1.88" (47.70)
1.88" (47.70)
1.87" (47.50)
PANEL CUTOUT
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 3⁄8"
• Two wire ports per terminal for
easier wiring of multiple
lampholder circuits
• 75W, 600V
• cCSAus Certified / cULus Listed
®
2G11 Horizontal Screw Mount
Shunted Version
C
1.34" (34.00)
• Quick connect push-in wire terminals for 18
AWG Solid or Twist & Tin or solder dipped
wire, stripped 3⁄8"
• Two wire ports per terminal for easier
US
PANEL CUTOUT
0.94" (24.00)
0.79" (20.00)
0.94" (24.00)
SHUNTED
1.34" (34.00)
0.79" (20.00)
0.30" (7.50)
0.94" (24.00)
C
UN-SHUNTED
1.83" (46.50)
• White PC body
• Spring metal clip for positive lamp retention
• Mounts using 2 screw holes located in
base legs
US
®
2G11
0.94" (24.00)
US
0.525" + 0.010"
(13.3 + 0.2)
0.30" (7.50)
0.83" (21.00)
C
1.00" + 0.010"
(25.5 + 0.2)
1.49" (37.75)
0.16" (4.00)
CF2G11-HSM
CF2G11-HSM-S
US
1.83" (46.50)
wiring of multiple lampholder circuits
• 75W, 600V
• cCSAus Certified / cULus Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
SHUNTED
0.66" (16.80)
CF2G11-HSI
2G11 Horizontal Snap-In Mount
CF2G11-HSI-S Shunted Version
• White PC body
• Spring metal clip for positive lamp retention
• Snap-in mount using 2 holes into a 0.025 x
0.040" (0.6 x 1 mm) panel thickness
US
1.83" (46.50)
1.83" (46.50)
UN-SHUNTED
0.94" (24.00)
• White PC body
• Spring metal clip for positive lamp retention
• No base - mounts using 2 screws through
lampholder body for confined spaces
C13
US
®
2G11
0.83" (21.00)
7
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 13
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 14
2G11
C14
CF2G11-H9SI
CF2G11-H9SI-S
COMPACT FLUORESCENT LAMPHOLDERS
®
2G11 Horz 90° Snap-In Mount
Shunted Version
C
®
2G11
CF2G11-HLEV
CF2G11-HLEV-S
US
SHUNTED
1.92" (48.75)
0.03" (0.80)
1.92" (48.75)
0.98" (25.00)
0.03" (0.80)
0.525" + 0.010"
(13.3 + 0.2)
PANEL CUTOUT
• Quick connect push-in wire
terminals for 18 AWG Solid or
Twist & Tin or solder dipped wire,
stripped 3⁄8"
• Snap-in mount into 2 holes into a 0.025 x
0.040" (0.6 x 1 mm) panel thickness
• Two wire ports per terminal for easier
wiring of multiple lampholder circuits
• 75W, 600V
• cULus Listed
®
2G11 Horizontal Slot Mount
Shunted Version
C
US
®
2G11
C
US
2.17" (55.12)
0.37" (9.47)
0.72" (18.29)
0.89" (22.61)
1.98" (50.39)
• White PC body
• Spring metal clip for positive lamp retention
• Slots on to panel - two grooves, one for
(.040”) #20 ga panel, the other for (.052”)
#18 ga panel
1.92" (48.88)
.040" (1.09)
.052" (1.39)
1.19" (30.23)
0.94" (24.00)
• Fits the Edwin-Gaynor™ and Leviton™
foot print
• Quick connect push-in wire terminals for 18
AWG Solid or Twist & Tin or solder dipped
wire, stripped 3⁄8"
0.61" (15.50)
0.61" (15.50)
UN-SHUNTED
SHUNTED
• Two wire ports per terminal for easier
wiring of multiple lampholder circuits
• 75W, 600V
• cCSAus Certified / cULus Listed
®
FL445 2G11 Horizontal 90° Screw Mount
C
US
®
2G11
ø 0.12" (ø 3.0)
C
US
0.94" (24.0)
2.02" (51.2)
0.98" (25.0)
1.89" (48.0)
0.87" (22.0)
0.43" (11.0)
1.10" (28.0)
0.28" (7.0)
0.69" (17.5)
0.49" (12.5)
Compact Fluorescent
0.30" (7.50)
UN-SHUNTED
C
1.00" + 0.010"
(25.5 + 0.2)
0.94" (24.00)
0.16" (4.00)
1.32" (33.50)
• White polycarbonate body
• Spring metal clip for positive lamp
retention
• Lamp position is 90° or vertical to the
mounting plane
US
1.42" (36.0)
0.43" (11.0)
0.05" (1.3)
• White Polycarbonate body, rated 110°C
• Spring metal clip for positive lamp
retention
• Lamp position is 90° or vertical to the
mounting plane
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin or
solder dipped wire, stripped 3⁄8"
• Mounts using two screw holes located
in base legs
• 75W, 600V
• cULus, cCSAus Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 15
2G11
COMPACT FLUORESCENT LAMPHOLDERS
®
FL446 2G11
Horizontal/Vertical Slide/Screw Mount
C
0.26" (6.5)
C
1.02" (26.0)
PANEL CUTOUT
US
.944" (24)
0.63" (16.0)
.170" (4
.3)
Screw Mounting
Vertical or Horizont
0.94" (24.0)
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin or
solder dipped wire, stripped 3⁄8"
• Wires from the back or bottom
0.39" (10.0)
1.42" (36.0)
1.187" (30.15)
.437" Plus projection of
(11.1) lampholder and
A
wiring (if rear wired)
Slot Mounting
• Two wire ports per terminal for easier
wiring of multiple lampholder circuits
• 75W, 600V
• cULus, cCSAus Listed
®
FL447 2G11 Horizontal Snap-In Mount
C
US
®
2G11
US
0.79" (20.0)
0.21" (5.3)
1.38" (35.0)
1.43" (36.0)
0.69" (17.6)
1.71" (43.5)
0.99" (25.2)
0.43" (11.0)
0.05" (1.3)
1.89" (48.0)
ø 0.12" (ø 3.0)
C
0.43" (11.0)
0.43" (11.0)
metal plate
• Quick connect push-in wire terminals
for 18 AWG Solid or Twist & Tin or
solder dipped wire, stripped 3⁄8"
0.98" (25.0)
• Two wire ports per terminal for easier
wiring of multiple lampholder circuits
• 75W, 600V
• cULus, cCSAus Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
0.79" (20.0)
ø 0.15" (3.7)
0.20" (5.0)
ø 0.17" (ø 4.3)
0.43" (11.0)
0.43" (11.0)
1.87" (47.5)
• White Polycarbonate body, rated 110°C
• Spring metal clip for positive lamp
retention
• Snap-in mount using two holes in
C15
®
2G11
• White Polycarbonate body, rated 110°C
• Spring metal clip for positive lamp
retention
• 3-way mounting, slide-on or screw
mount vertical or horizontal
US
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 16
2G11
C16
COMPACT FLUORESCENT PUSH TO RELEASE
LAMPHOLDERS
A
CF2G11-HSI-REL 2G11 Releasable - Horizontal
Snap-in Mount
®
C
US
®
2G11
C
24.5
US
(0.520" +/- 0.0005")
5.0
13.0
7.5
47.3
27.6
32.00
25.3
PANEL CUTOUT
• Use where extra mechanical support is
required
• Can be used where there is little room to
remove the lamp horizontally, lamp can be
removed laterally.
• Push button to release the lamp.
• Made from Polycarbonate, rated 110°C
• Phospor bronze contacts
• Quick connect push-in wire terminals for 18
AWG Solid or Twist & Tin or solder dipped
wire, stripped7/16"
• Two wire ports per terminal for easier
Horizontal snap in mount into base panel
• 660W, 600V
• CSA Approved / UL Listed
®
CF2G11-HSM-REL 2G11 Releasable - Horizontal
Screw Mount
C
US
®
2G11
C
US
24.50
13.00
5.00
7.50
40.00
33.60
(58.30mm +/- 0.1mm)
21.00
Compact Fluorescent
33.8
43.9
(1.00" +/- 0.0005")
47.30
PANEL CUTOUT
27.40
• Use where extra mechanical support is
required
• Can be used where there is little room to
remove the lamp horizontally, lamp can be
removed laterally.
• Push button to release the lamp.
• Made from Polycarbonate, rated 110°C
• Phospor bronze contacts
• Quick connect push-in wire terminals for 18
AWG Solid or Twist & Tin or solder dipped
wire, stripped7/16"
• Two wire ports per terminal for easier
Rear screw mounts into two holes in panel
located in base legs.
• 660W, 600V
• CSA Approved / UL Listed
®
CF2G11-RSI-REL
Releasable -Rear Snap In
C
US
®
2G11
C
US
4.2mm (0.165")
56mm (2.20")
PANEL CUTOUT
• Use where extra mechanical support is
required
• Can be used where there is little room to
remove the lamp horizontally, lamp can be
removed laterally.
• Push button to release the lamp.
• Made from Polycarbonate, rated 110°C
• Phospor bronze contacts
• Quick connect push-in wire terminals for 18
AWG Solid or Twist & Tin or solder dipped
wire, stripped7/16"
• Two wire ports per terminal for easier
Rear snap in mount into two hole in vertical
panel
• 660W, 600V
• CSA Approved / UL Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 17
2G11
Accessories
2G11
COMPACT FLUORESCENT PUSH TO RELEASE
LAMPHOLDERS & ACCESSORIES
CF2G11-RSM-REL
Releasable -Rear Screw Mount
®
C
US
C17
®
2G11
C
37.50
US
24.50
5.00
13.00
7.50
64.30
56 mm (2.20")
.10
35.20
16.00
9.00
16.00
4.20 mm (0.160")
56.00
PANEL CUTOUT
12.50
• Made fromPolycarbonate, rated 110°C
• Phospor bronze contacts
• Quick connect push-in wire terminals for 18
AWG Solid or Twist & Tin or solder dipped
wire, stripped7/16"
• Two wire ports per terminal for easier
Rear screw mount into two holes in vertical
panel or using 2 self taping screws into.
lampholder.
• 660W, 600V
• CSA Approved / UL Listed
Compact Fluorescent Lamp Accessories
LCM-2G11-1-SI Lamp Support Snap-In Mount
2G11
0.17" (4.40)
0.31" (8.00)
0.31" (8.00)
0.16" (4.00)
0.41" (10.40)
1.45" (36.80)
1.67" (42.50)
0.33" (8.40)
0.18" (4.50)
0.30" (7.50)
0.08" (2.00)
0.24" (6.00)
0.08" (2.00)
• For use with 2G11 lamp
• Stainless Steel
• Assures correct gap height between
lamp and panel
• Locking wing design fits in
between lamp fingers and assures
good grip on lamp
• Snaps into one round or square
0.220”(5.5mm) hole in panel
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
47.30
• Use where extra mechanical support is
required
• Can be used where there is little room to
remove the lamp horizontally, lamp can be
removed laterally.
• Push button to release the lamp.
40.00
35.00
R2
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 18
Product
2G11
Accessories
Group
C18
2G11
Accessories
COMPACT FLUORESCENT
LAMPHOLDER ACCESSORIES
LCP-2G11-1-SI
Vertical Lamp Support Snap-In Mount
0.22" (5.5)
PANEL CUTOUT
0.22" dia. (5.5)
0.43" (11.0)
• For use with 2G11 Lamps
• Made from high heat thermoplastic
• Assures correct gap height between
lamp and panel
• Clips onto the outside of lamp for
secure positioning of the lamp
• Snaps into single hole in panel
LCP-2G11-2-SI
Horizontal Lamp Support Snap-In Mount
2G11
0.22" (5.5)
0.43" (11.0)
PANEL CUTOUT
0.22" dia. (5.5)
0.43" (11.0)
• For use with 2G11 Lamps
• Made from high heat thermoplastic
• Assures correct gap height between
lamp and panel
• Clips onto the outside of lamp for
secure positioning of the lamp
• Snaps into single hole in panel
LCP-2G11-ADJ-SI
Snap-In Adjustable Lamp Support Clip
2G11
1.61" (41.0)
PANEL CUTOUT
0.22" (5.5)
0.43" (11.0)
0.37" (9.5)
Compact Fluorescent
0.43" (11.0)
2G11
0.22" dia. (5.5)
0.17" (4.3)
0.22" (5.5)
• Lamp support clip for 2G11
base lamps
• Lamp bracket is made from UV
stabilized clear polycarbonate
•
•
•
•
Foot is made from white polycarbonate
The clip features 3 height adjustments
Push fits into 0.22” (5.5mm) hole
For panel thickness up to 0.040” or 1 mm
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
2G11
Accessories
COMPACT FLUORESCENT
LAMPHOLDER ACCESSORIES
C19
LCP-2G11-ADJ-SI-COVER
Snap-In Adjustable Lamp Support Clip w/ Cover
2G11
0.35" (9.00)
0.85" (21.47)
1.64" (41.65)
PANEL CUTOUT
ø0.22" (ø5.50)
1.49" (37.97)
1.50" (38.07)
0.22" dia. (5.5)
0.15" (3.80)
1.64" (41.65)
• Lamp support clip for 2G11
base lamps
• Lamp bracket is made from UV
stabilized clear polycarbonate
•
•
•
•
Foot is made from white polycarbonate
The clip features 3 height adjustments
Push fits into 0.22” (5.5mm) hole
For panel thickness up to 0.040” or 1 mm
• PC cover locks over lamp for added
security and protection. To remove cover,
simply pull up over locking clip.
LCM-2G11-HP-SC
Metal Lamp Support Screw Mount
• Lamp support clip for 2G11
base lamps
• Made from corrosion resistant spring
steel for long service life
0.235" (6.0)
1.2" (30.5)
2G11
0.13" dia. (3.3)
1.56" (39.7)
• Single height stand off of 0.475”
(12.1mm)
• Screw mounts using one 0.130”
(3.3mm) hole in panel
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
0.43" (11.00)
0.475" (12.1)
s
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 19
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 20
GU-24
G24-Q1 & Q2
C20
GU-24 COMPACT FLUORESCENT
SELF -BALLASTED LAMPHOLDERS
Q-03A 13W Self Ballasted Lampholder GU-24 / G24-Q1 Flush side
Q-03AR 13W Self Ballasted Lampholder GU-24/G-24-Q1 Outer Threaded
®
G24-q1/
C
US
GX24-q1
• These self ballasted lampholders adapt to GU-24 base sockets at the base and then accept G24-q1 or G24-q2 (depending on
model) lamps at the other end.
• For use in dry, damp and wet locations.
• Constructed of thermoplastic body material, UL94V-0 flammability rating.
• Will withstand Hi Pot test at 1250V for 1 minute.
• Ambient temperature range: 0F to 120F (-20C to 50C).
• Inherent thermal and overcurrent protection.
• Ideal for commercial,residential applications including wall sconces and portable lamps.
• Instant start.
• Built in end of life circuit.
• c UL us listed.
Fit with GU24 Socket
2.0
24
51
38
Q-03A & Q-04A
• Q-03A is for 13W G24-q1 or GX24-q1 base lamps.
• 120V, 60Hz, 0.17A.
• flush outer body design for lampholders that secure to the
fixture body.
Drawing for Q-03A Q-04A
• Q-04A is for 18W G24-q2 or GX24-q2 base lamps.
• 120V, 60Hz, 0.23A.
• flush outer body design for lampholders that secure to the
fixture body.
24
Fit with GU24 Socket
2.0
Compact Fluorescent
Ideal for Green Fixture Manufacturers seeking to comply with todays Energy Efficiency Standards using the
latest ballasts and lampholders.
51
Q-03AR & Q-04AR
38
56
Drawing for Q-03AR Q-04AR
• Q-03AR is for 13W G24-q1 or GX24-q1 base lamps.
• Q-04AR is for 18W G24-q2 or GX24-q2 base lamps.
• 120V, 60Hz, 0.17A.
• 120V, 60Hz, 0.23A.
• outer threaded body which can secure shade using plastic ring • outer threaded body which can secure shade using plastic ring
provided.
provided.
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 21
GU-24 COMPACT FLUORESCENT
SELF -BALLASTED LAMPHOLDERS
Q-05AP 26W Self Ballasted Lampholder GU-24 / G24-Q3 Flush sides
Q-05APR 26W Self Ballasted Lampholder GU-24/G-24-Q3 Outer Threaded
GU-24
G24-Q3
C21
®
G24-q3/
C
US
GX24-q3
Ideal for Green Fixture Manufacturers seeking to comply with todays Energy Efficiency Standards using the
latest ballasts and lampholders.
Q-05AP & Q-06AP
• Q-05AP is for 26W G24-q3 or GX24-q3 base lamps.
• 120V, 60Hz, 0.34A.
• flush outer body design for lampholders that secure to the
fixture body.
Q-05APR & Q-06APR
• Q-05APR is for 26W G24-q3 or GX24-q3 base lamps.
• 120V, 60Hz, 0.34A.
• outer threaded body which can secure shade using plastic
ring provided.
Drawing for Q-05AP & Q-06AP
• Q-06AP is for 32W G24-q3 or GX24-q3 base lamps.
• 120V, 60Hz, 0.40A.
• flush outer body design for lampholders that secure to the
fixture body.
Drawing for Q-05APR & Q-06APR
• Q-06APR is for 32W G24-q3 or GX24-q3 base lamps.
• 120V, 60Hz, 0.40A.
• outer threaded body which can secure shade using plastic ring
provided.
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Compact Fluorescent
• These self ballasted lampholders adapt to GU-24 base sockets at the base and then accept G24-q3 lamp at the other end.
• For use in dry, damp and wet locations.
• Constructed of thermoplastic body material, UL94V-0 flammability rating.
• Will withstand Hi Pot test at 1250V for 1 minute.
• Ambient temperature range: 0F to 120F (-20C to 50C).
• Inherent thermal and overcurrent protection.
• Ideal for commercial,residential applications including wall sconces and portable lamps.
• Instant start.
• Built in end of life circuit.
• c UL us listed.
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:03 AM Page 22
GU-24
C22
GU-24 COMPACT FLUORESCENT
LAMPHOLDERS
CF-GU24-473
GU-24 Lampholder, push in wire terminals
®
C
US
Compact Fluorescent
Ideal for Green Fixture Manufacturers seeking to comply with todays Energy Efficiency Standards using the
latest ballasts and lampholders.
CF-GU24-473-1
CF-GU24-473
CF-GU24-473-6
CF-GU24-473-4
CF-GU24-473-3
Constructed of thermoplastic body material, UL947-0 flammability rating.
GU-24 bi-pin twist-lock configuration holds lamp or ballast in place.
Quickwire terminals accept 18 AWG solid or bonded copper wire, stripped 3/8”
Prewired lead types have 9” UL 1015 105C, partial stripped 1/2” but are available with other lead lengths.
Ideal for commercial,residential applications including wall sconces and portable lamps.
Wires from the back of the lampholder.
Push in wire terminal models are rated 250W 600V.
Prewired lead type are rated 250W 600V.
c UL us listed.
14.6
16.9
14.6
Drawings:
14.6
38
5
40.4
5
32
18.1
14.6
1.0
38
23.3
29.3
48.2
38
42.2
1/8 - 2NPSM
3.2
CF-GU24-473-2
CF-GU24-473-1
SM
CF-GU24-473
NP
38
CF-GU24-473-4
8.3
22.9
1/8
1.0
26
14.6
1
CF-GU24-473-3
O 38
-2
16
6.0
0.5 - 1.0
Note O 3.2 is the inner
diameter of the rivet
6.0
0.5 - 1.0
38
22.3
0.5 - 1.0
•
•
•
•
•
•
•
•
•
CF-GU24-473-2
Panel Thickness = 0.5 - 1.0
CF-GU24-473-6
CF-GU24-473-7
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
C_Compact_Fluorescent_A_Compact_Fluorescent.qxd 13-02-07 11:04 AM Page 23
GU-24
GU-24 COMPACT FLUORESCENT
LAMPHOLDERS
C23
CF-GU24-475D
GU-24 Lampholder,outer threaded body, push in wire terminals
®
C
US
Ideal for Green Fixture Manufacturers seeking to comply with todays Energy Efficiency Standards using the
latest ballasts and lampholders.
CF-GU24-475D
CF-GU24-475D1
CFGU24-475D-1/8IP-CAP
CFGU24-475D-RING
2.5
28.4
28.6
46.8
Constructed of thermoplastic body material, UL947-0 flammability rating.
GU-24 bi-pin twist-lock configuration holds lamp or ballast in place.
Quickwire terminals accept 18 AWG solid or bonded copper wire, stripped 3/8”
Prewired lead types have 9” UL 1015 105C, partial stripped 1/2” but are available with other lead lengths.
Ideal for commercial,residential applications including wall sconces and portable lamps.
Wires from the back of the lampholder.
Push in wire terminal models are rated 250W 600V.
Prewired lead type are rated 250W 600V.
c UL us listed.
12.3
•
•
•
•
•
•
•
•
•
Compact Fluorescent
CF-GU24-475 Cap & Ring Assembled
37.6
39.6
37.6
58.7
39.8
3.2
57.6
CF-GU24-475 with Ring and Cap
CF-GU24-475D1
CF-GU24-475D
CFGU24-475D-RING
12
CF-GU24-475D 1/8IP-CAP
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)