1 aisle c 15 UK

advertisement
Aisle Containment
solutions for high density
applications
CLIMAVENETACONTAINMENT
SYSTEM
Aisle Containment solutions for high density applications
ADVANTAGES
1,2
1,7
2,3
INCREASED
EFFICIENCY
PERFECT
INSTALLATION
of the cooling system
thanks to the
complete separation
of hot and cold air
streams (GREEN)
in High Density Data
Centers
MODULAR
PANELS
BOTH
HOT AND COLD
CONTAINMENT
3,1
1,5
2,8
for perfect
integration in in-row
racks (FLEX)
LOW CAPITAL
EXPENDITURES
configurations available
EASY EXPANSION
for a modular Data Center
(<CAPEX)
This mix results in airflow with an
uncontrolled temperature that reduces the
performance of the Data Center.
Therefore, it is necessary to provide the physical
separation of the hot and cold air streams.
This is achieved by using the ‘Climaveneta
Containment System’, a simple system of
modular and scalable panels that prevent hot
and cold air mixing. It is a simple and effective
solution that guarantees the servers will be fed
with cold air and the cooling system to be more
efficient.
2 l 3 CLIMAVENETA CONTAINMENT SYSTEM
CONFIGURATION
EASY AND FAST
INSTALLATION
with different kinds of
cooling technologies:
- INVERTER
- InRow / Enclosure
- Cooling Door
Cold Corridor Containment, which provides
strict control of the air feeding the servers.
Hot Corridor Containment, which confines
hot discharge air from servers.
Both the Hot and Cold Corridor Containment
Systems represent the perfect solution to
increasing the efficiency of the Data Center.
PERFECT
INTEGRATION
SPACE
OPTIMIZATION
FOR APPLICATIONS
WITH OR WITHOUT
RAISED FLOOR
CLIMAVENETACONTAINMENT SYSTEM
COLD AISLE CONFIGURATION
HOT AISLE CONFIGURATION
The cold air extracted from the cooling system goes through the
raised floor via a grid to expel the air. It is then directed to the
front of the rack through the raised floor. Cold air inside the
Climaveneta Containment System is directed across the whole
height of the rack, avoiding mixing cold air with hot air. The air
that passes through the rack absorbs the heat of the server and
is then expelled from the back of the rack through the fans.
Thermal
distribution
in one rack
inside a cold
aisle
Well managed airflow and the control over the temperature of the
air provide several advantages to the conditioning system:
The cold air generated by the cooling system passes
through the raised floor via a grid for the expelled air.
It is then directed to the front of the rack through the
raised floor where it is sucked by the rack.
Cold air inside the rack becomes hot as it absorbs
the heat from the server and is then ejected from the
back of the rack through the fans.
The Climaveneta Containment System encloses a hot
aisle to collect the hot exhaust air where the air
temperature is much higher than the room
temperature.
Higher control over the temperature
Up to 30% increased efficiency thanks to a higher
temperature difference between inlet and outlet air
°C
18
Constant temperature on the front of the rack at any height,
as the partitioning eliminates the thermal gradient normally
existing.
20
22
25
Thermal
distribution in
a rack in
raised-floor
data centers
This means that the difference between the air
temperature in the corridor and the cooled air through
the cooling system is sufficiently high (>15°C) to
ensure the greatest efficiency of the system.
29
The cold air containment system ensures the increased efficiency
of the whole cooling system. Due to the cold aisle being
contained there is no chance of the hot exhaust air mixing with
the cold inlet air; therefore, the air needed is just inside the aisle.
The result is a considerable increase in the system efficiency.
This configuration ensures higher efficiency of the
system because of the isolation of the hot air from the
rest of the room, without changing the room
temperature.
32
35
38
42
KEY BENEFITS
KEY BENEFITS
Consistent temperature and
humidity levels
Constant temperature at any height
of the rack
Return Air Plenum
Higher efficiency compared to
traditional cooling systems
Roof Panel
CRAC
Improved Flexibility
CRAC
Room neutral design
Higher thermal efficiency and
reduced energy consumption
Separation of the hot air stream
from the rest of the room
Reduced space occupancy
Baffle
Baffle
Floor Brush
Seals
4 l 5 CLIMAVENETA CONTAINMENT SYSTEM
Floor Brush
Seals
CLIMAVENETACONTAINMENT SYSTEM
TECHNICAL FEATURES AND DATA
THERMAL INSULATION
Coverage of transparent Plexiglas panels
to maintain thermal insulation and allow
light to enter.
SAFE AND EASY ACCESS
Sliding doors with swing handle to allow the entry
to staff only
Opening from the inside
Manual /Semi-automatic /automatic with RADAR
sensor door
CABLE COVERAGE
Maximum protection and integrity of the cables
Easy transition of the cables connected to the
equipment mounted in the rack , thus facilitating
possible replacement operations or any maintenance
work involving the removal of the equipment
PERFECT INTEGRATION
with the Climaveneta units.
CLIMAVENETA FOR DATACENTER
An efficient structure especially designed for
the installation of high density Racks and
Cooling Doors.
Better thermal insulation of the cabinet
ORGANIZED CABLING
MANAGEMENT
The cable coverage has been designed to
organize the cabling and guarantee thermal
insulation. The coverage is available on demand.
THERMAL INSULATION
ON THE BASEMENT
Special leveling feet are to be installed at the
bottom of the rack which contributes to avoiding
mixing the air.
6 l 7 CLIMAVENETA CONTAINMENT SYSTEM
CLIMAVE
COOLING DOOR
RACK COOLER
CRCX: Direct Expansion
CRCC: Chilled Water
CV CONTAINMENT_02-2012_GB_00
Download