ELECTRONICS
www.techrentals.com.au
Multimeters & Electrometers
Digital Storage Oscilloscopes
Probes & Accessories
Function Generators
LCR Meters
DC Power Supplies & Loads
Spectrum Analysers - Low Frequency
TV Test Equipment
Laboratory Calibrators
Logic Analysers/PROM Programmers
Gauss/Tesla Meters
E & H Field Strength Meters
EMC & Power Disturbance Simulators
Multimeters & Electrometers cont’d.
LEM Unigor 355 Hand-held Digital Multimeter/Signal
Generator
LEM,UNIGOR355 (1214)
AU
Measures DC, AC true RMS voltage & current, resistance,
frequency, capacitance, temperature & time. Display 4¾
digit. Resolution 10μV, 10nA, 10mΩ, 1pF & 0.01Hz. Ranges
voltage 300mV to 1kV, current 300μA to 10A, resistance
300Ω to 30MΩ, frequency 300Hz to 100kHz, -48 to 63dB,
temperature ºC/ºF, Pt 100 -200 to 100ºC, Pt 1000 100
to 850ºC. Features automatic socket shutters, IR interface, split second
chronograph, automatic measurement value storage, etc.
Metrix MX51EX Intrinsically Safe Digital Multimeter
MET,MX51EX (1204)
AU
Resolution 5,000 count with 0.1% basic accuracy. Measures AC/DC
voltage & current, & resistance. Voltage sensitivity 100μV. Max voltage
1kVDC, 750VAC. Max current 10A. Intrinsic safety limits of 60V & 500mA.
Vermason 222541 Electrostatic Meter
VER,222ES (1246)
AU
Electrostatic meter for periodic audits of facilities,
monitoring packaging, materials, machines and other
electrostatic generative equipment or processes. This
precision field meter is designed to measure electrostatic
voltage potentials over selected distances from 1 to 20cm.
Range at the standard distance of 2cm is 20kV. Two range
3 digit display in V or kV.
Multimeters & ElectrometersTe
See also Electrical Testers on page 29-30
Fluke 87-5 Industrial True-RMS Multimeter with Thermometer
FLU,87-5
MY
Unique function for accurate voltage and frequency measurements
on adjustable speed. True-RMS AC voltage and current for accurate
measurements on non linear signals. Built in thermometer. Measure up
to 1,000VAC and DC. Measure up to 10A (20A for 30 seconds). 10,000uF
capacitance range. Frequency to 200kHz and % duty cycle. Peak capture
to record transients as fast as 250μs. 4½ digit mode.
Digital Storage Oscilloscopes
Agilent MSOX3024A 200MHz
Scope 4+16Ch with Logic
Analyser
AGI,MSOX3024A (1340)
Fluke Multimeter with Backlight
FLU,177 (1209)
AU
General purpose multimeter 0.09% basic accuracy.
True RMS voltage & current measurements,
digital display with analog bargraph & backlight,
manual & automatic ranging, display Hold & Auto
Hold, frequency & capacitance measurements.
Overvoltage category EN61010-1 CAT III 1000V/
CAT IV 600V.
Agilent MSO6104A 1GHz Digital Oscilloscope
with Logic
AGI,MSO6104A (1345)
AU
True-RMS multimeter. Large 50,000-count 1/4 VGA
dot matrix display. 0.025% Basic DC accuracy. CAT
III 1000 V/CAT IV 600V safety rated.
Fluke 199C Scopemeter 200MHz Hand-held
FLU,199C-SCOPEMETER (1361)
AU
200MHz bandwidth 2 channel colour digital oscilloscope
with DMM feature. 14.4cm colour display with
persistence feature. 2.5GS/s real time sampling. Input
sensitivity 5mV/div to 100V/div. Glitch capture 3ns using
pulse width triggering. Timebase range in scope mode
5ns/div to 2min/div. Trigger types auto, free run, single
shot, edge, delay, video, video line, selectable pulse
width and external. Automatic capture and replay of last
100 screens. Measures electrical power properties such
as VA VAR, etc. Isolated inputs.
Agilent/HP 34401A Digital Multimeter
HP,34401A (1200)
AU
1GHz 4 + 16 channel mixed signal oscilloscope
(MSO). 4Gsa/s. XGA Colour display updates
100,000 waveforms/s with 256 levels intensity.
4 analogue channels & 16 logic channels. Deep memory. 8 digit frequency
counter function. Triggering includes video, HDTV, I2C, SPI, LIN, CAN, &
USB. FFT analysis included. LAN, USB, GPIB, & XGA interfaces standard.
Fluke 289 True-RMS Industrial Logging
Multimeter with TrendCapture
FLU,289 (1208)
AU
Mixed signal oscilloscope. 4 analogue and 16 digital
channels 200 MHz bandwidth, 4 GS/s, 2 Mpts memory, 1 M/s waveform
update rate. Search and navigate capability. Integrated time-aligned digital
and analog signal viewing. USB storage, LAN operability.
AU
Precision 6½ digit multimeter. 100nV sensitivity on DC 120mV range. Max
DC input 1kV. Measures AC voltage, DC & AC current to 3A, 2 or 4 wire
resistance to 120MΩ, period & frequency. Max reading rate 1,000/s. Maths
functions including limits test. 512 point storage. RS232 & HPIB interfaces.
8
ELECTRONICS
www.techrentals.com.au
Digital Storage Oscilloscopes cont’d.
Digital Storage Oscilloscopes cont’d.
Tektronix TDS2024B 200MHz Digital
Oscilloscope
TEK,TDS2024B (1332)
Tektronix TPS2014 100MHz 4 Channel
Powerscope
AU
TEK,TPS2014 (1321)
4 channel 200MHz bandwidth colour digital
storage oscilloscope. 2GS/s sampling rate.
Sensitivity 2mV to 5V/div. Automatic waveform
measurements. Includes FFT analysis as
standard. Removable data storage via front
panel USB port.
AU
Sampling rate 1GS/s. All 4 channels
isolated for floating measurements.
Sensitivity 2mV to 5V/div. Measurements
for current and voltage distortion and their spectral content, harmonics,
instantaneous power, power factor and switching loss. Automatic waveform
measurements. FFT, power analysis, low & high voltage power probes
(P5120). Battery operation.
Tektronix TDS3052B 2 Channel
500MHz DSO
TEK,TDS3052B (1342)
AU
Probes and Accessories
Sampling rate 5GS/s. Memory length 10k.
Sensitivity 1mV to 10V/div. Time base 1ns
to 10s/div. Trigger functions include video.
Automatic waveform measurements. FFT
Analysis. Wave alert & e-scope web based control. Colour LCD with digital
phosphor function. Centronics, GPIB (IEEE-488), Ethernet, & RS232
interfaces. In-built FDD.
Chauvin Arnoux Current Probe E3N 0 to 100 Amp
CHA,PROBE-I (1440)
Tektronix TDS3054B 500MHz 4 Channel DSO
TEK,TDS3054B (1344)
TEK,TDS3054
AU
MY
Fluke 80K-40 High Voltage Probe
FLU,80K-40 (1219)
Sampling rate 5GS/s. Memory length 10k. Sensitivity 1mV to 10v/div. Time
base 1ns to 10s/div. Trigger functions include video. Extensive automatic
waveform measurements. Including FFT, TV trigger, advanced analysis
(TDS3AAM), and limit testing (TDS3LIM). Battery operation.
AU
1 to 40kVDC or peak AC, 28kVAC RMS. Input
resistance 1GΩ, division ratio 1,000:1. Note:
input impedance of DVM must be 10MΩ or
reading will be wrong.
Tektronix THS730A 200MHz Battery DSO
TEK,THS730A (1360)
AU
Current probe for oscilloscopes which uses a Hall effect cell for the
measurement of DC or AC current. Measures currents from 50mA to
100A peak. A thumbwheel can be used to reset zero for adaption to the
measurement environment. The clamp can be used with any measurement
instrument which has a BNC input and an impedance of 1MΩ, <100pF.
Hewlett Packard A3 flatbed pen plotter with IEEE interface
AU/MY
HP,7475A-I (1480)
Dual channel battery portable 200MHz digital storage
oscilloscope with digital multimeter facilities. Maximum
sampling rate 1GS/s. Maximum input 640V RMS,
maximum float 600V RMS. Waveform processing
includes watts calculations. Video trigger. RS232
interface.
AU
Flatbed pen plotter, A3/A4 format with IEEE interface and HP-GL language
compatibility.
Tektronix P6015 40kV High Voltage Probe
TEK,P6015 (1450)
AU
Bandwidth 75MHz. Input rating: 40kV pulse, 20kVDC plus peak AC. Derating
with frequency applies. Input impedance 100MΩ. Attenuation x 1000.
TRAINING FROM TECHRENTALS
•
•
•
•
TechRentals can offer manufacturer training on high-end Electrical, Telecommunication
and NDT testing (fees vary).
Training can be done on specific assets as part of the set up and download service (fees apply).
Videos are available on the website to assist in operation of certain models.
Industry recognised competency training courses.
TechRentals offers a number of short courses designed to enhance skills and experience in areas of
particular benefit to technical personnel. These courses are recognised throughout industry as providing
the necessary capabilities to manage and complete tasks effectively and efficiently.
For a listing of all courses, please download the industry competency course planner.
This lists additional courses applicable to other areas e.g. power installation, air conditioning,
and alarm systems.
www.techrentals.com.au/training.html
99
ELECTRONICS
www.techrentals.com.au
Probes and Accessories cont’d.
LCR Meters
USB to RS232 Converter
USB,232CONVERTER (1490)
Hioki 3532-50 5MHz LCR
Meter
AU
USB to RS-232 seriel converter with FTDI chip technology. For converting
legacy peripherals to Universal Serial Bus (USB). Connects to a computer
via the USB port and provides 1 high speed RS-232 serial port. Suitable for
Windows 98, 2000, server 2003, XP, ME, CE, MAC-OS8, OS9, OSX and
Linux 4.2 and above. USB type A.
HIO,LCR 3532-50 (1290) AU
Frequency range 42Hz to 5MHz. 5ms high
speed measurements. Basic accuracy of
±0.08%. Memory for 30 sets of measurement
conditions, including comparator values. Includes correlation correction
function, interactive touch panel operation and enlarged display function.
Applications include laboratory use for evaluation of operating characteristics,
production line use or R&D. Measurement data captured by a personal
computer can be displayed graphically by using standard spreadsheet
software.
Function Generators
See also RF Signal & Sweep Generators on page 14
Stanford Research SR720 LCR Bridge
Agilent/HP 33120A 15MHz Function/Arbitrary Generator
HP,33120A
SR,SR720 (1297)
MY
Function/Arbitrary Waveform Generator. Frequency 15MHz sine and square
waveforms, and 100kHz triangle and ramp waveforms. Gaussian noise
to 10MHz. Output into 50ohms 50mV to 10VP-P. AM, FM, FSK, and burst
modulation. HP-IB and RS-232C interfaces both standard.
Agilent/HP 33220A 20MHz Function/
Arbitrary Generator
HP,33220A (1613)
AU
DC Power Supplies & Loads
Frequency range 20MHz sine & square
waveforms, 200kHz pulse, triangle, ramp,
noise, & DC waveforms. Gaussian noise to
10MHz. Output into 50Ω 10mV to10V P-P. AM, FM, FSK, & burst modulation.
Includes option 001 external timebase reference. With optional Benchlink
software waveforms can be captured & played back. HPIB, USB, & LAN
interfaces.
Invensys Intergy Mini Power System
48VDC 2.4kW Supply
INV,MPS48DC2400W (8117)
AU
Frequency range 80MHz sine & square
waveforms. 50MHz pulse waveforms with
variable rise/fall times. 25MHz arbitrary
waveforms, 1MHz triangle & ramp waveforms. White noise to 50MHz. Output
into 50Ω 10mVpp to 10Vpp. AM, FM, FSK, & burst modulation. Intuilink
software for programming arbitrary waveforms. HPIB & RS232C interfaces.
Kikisui PLZ1002W Electronic Load
KIK,PLZ1002W (8120)
AU
Dual channel function/arbitrary waveform
generator. Frequency range 1mHz to
25MHz sine, 12.5MHz square & pulse
waveforms, 250kHz triangle, ramp, noise & DC waveforms. Arbitrary
waveform generation 12.5MHz. Gaussian noise to 25MHz. Output into 50Ω
10mV to 10V P-P. AM, FM, FSK, & burst modulation. HPIB, USB, & LAN
interfaces used with included software allows waveforms to be created on
PC & imported into unit. Full screen display also allows display & editing of
waveforms on unit itself.
Sorensen DCS 150V, 20A DC
Power Supply
SOR,DCS150-20E (8113)
AU
0-150V, 20A, 3KW. Applications
range from manufacturing test and burn-in of automotive components,
avionics electronics, telecommunications and consumer products to beam
steering, process control, laboratory R&D use. Remote control via LAN or
RS232.
Sorensen DCR10-120B DC Power Supply
Tektronix 3102/100MHz
Arbitrary Function Generator
TEK,AFG3102 (1614)
AU
Voltage range 3 to 110V. Current range 0 to 200A. In-built oscillator provides
for dynamic load testing by switching between two different load levels. Load
current may be remotely controlled by voltage or resistance signals. Multiple
units may be operated in parallel. In-built digital volt/current meter. For DC
inputs only.
Tektronix 3022/25MHz
ArbitraryFunction Generator
TEK,AFG3022 (1620)
AU
Sub-rack mini system 19” rack mount
range. For low power telecommunications
applications (premises data networks &
IP routers, local loop transmission systems & wireless) requiring flexible DC
power supplies. Includes integral DC distribution panel and SM30 Series
Intergy Supervisory Module. All system settings are fully adjustable in
software. Power factor: >0.98@30 to 100% max system current. Efficiency:
>89%. Output: voltage 48V, 45 to 60VDC, current@48VDC 50A (2400W).
Agilent/HP 33250A 80MHz Function/
Arbitrary Waveform Generator
HP,33250A (1618)
AU
Automatic LCR bridge with 0.05% accuracy. Ranges:
inductance 0.0001μH to 99,999H; capacitance 0.0001pF
to 99,999μF; resistance 0.0001Ω to 2,000MΩ. Also measures Q & D. Test
frequencies 100/120Hz, 1/10/100kHz. Indicates value, deviation, % deviation,
or bin number. DC bias internal 0 to 2V, external 0 to 40V. Complete with
optional Kelvin leads.
SOR,DCR10-120B
MY
0 to 10V, 0 to 120A.
AU
Dual channel function/arbitrary waveform
generator. Frequency range 1mHz to 100MHz
sine, 50MHz square and pulse waveforms, 1MHz triangle, ramp, noise, and
DC waveforms. 50MHz Arbitrary waveform generation. Gaussian noise
to 100MHz. Output into 50Ω. 10mV to 10V P-P. AM, FM, FSK, and burst
modulation. HPIB, USB, and LAN interfaces used with included software
allows waveforms to be created on PC and imported into unit. Full screen
display also allows display and editing of waveforms on unit itself.
Sorensen DCS60-50, 60V 50A DC Power Supply
SOR,DCS60-50 (8114)
AU
0 to 60V, 0 to 50A. Max power on a 240V 3ph supply 3kW, 2.5kW on a 1ph
240V supply. On 1ph 50V@50A or 60V@42A. Remote programming.
TR Built 12V Battery Supply with Cigarette Power Connector
TR,12V-BAT-CIG (8160)
AU
12V 20AH battery pack with built-in charger. Has cigarette outlet and banana
plug connectors.
10
SETUP AND DOWNLOAD
www.techrentals.com.au
Save your time and reduce your costs by using our data management services. Learning
to operate unfamiliar equipment costs you time and can lead to fundamental errors
in data capture processing. There is a better solution - our setup and download service.
Our technical staff are equipped and trained to deliver you the downloaded data in a range of
suitable output formats including USB drive, CD-ROM, printout, chart and DVD according to your
need and the product’s functionality.
When you nominate your output preferences and appropriate technical information, the rest is taken care of.
The completed files or printouts will be forwarded to you quickly or may be collected at an arranged time.
The equipment marked with ‘S’ symbol is available to rent with this service. Fees vary depending on the
complexity of operation and the level of detail involved.
Data management services are available for many products. Below are some examples of what you can expect.
SEWARD ProTag Optima 300
CHK PM30/ PM30PLUS - 3CTs
(SEW,PT-300)
[Note: Max current is 1000A for PM30]
CHK PM40/ PM45 - 4CTs
Setup:
• Load logo file in printer
• Load test settings
(CHK,PM30)
Setup:
• 3P4W(star) or 3P3W(delta)
• Max. Current (<1000A or <3000A)
• 3P Current only or 3p and Neutral
• Log Period and Log Interval
• Log Profiling (V,I,PF,kWh,THD)
• Event Capture
(Sag,Swell,Transient)
• Start Log Next Power up
Results Downloaded:
• Provide database in PATGuard
format
• Provide CD with PATViewer
software including database for
end customer
Results Downloaded:
• Raw Data
• PowerView Software
• PDF report of V & I Trend Graph
• Total kWh Calculation
• Exported Data as CSV or
Excel files
FLUKE DTX1800
(FLU,DTX1800)
Setup:
• Company name
• Site
• Tester
• Setup of certification test limit
• Cable type
Results Downloaded:
• Raw Fluke Linkware files
• Linkware software
• PDF report of results
FOURIER DAQPRO
(FOU,DAQPRO-2)
Setup:
• How many channels to be
measured (Out of 8 channels)
• Each channels measurement.
eg Voltage - Current etc
• Channel scaling
• Period of logging to determine
logging interval
• Logging Interval
FLUKE Ti25 Thermal Camera
(FLU,TI25)
Results Downloaded:
• Raw image files
• Relevant editing software
• Adjust isotherm and emissivity
• Standard report of images
Results Downloaded:
• Data results
• DAQPRO viewing software
and editing
11
ELECTRONICS
www.techrentals.com.au
DC Power Supplies & Loads cont’d.
Laboratory Calibrators
Trio PD35-20 DC Power Supply
See also Industrial Process Calibrators on page 48-51
TRI,PD35-20 (8109)
AU
Output 0 to 35V, 0 to 20A. Constant current, constant voltage. Multiple
parallel or series operation. Remote programming of voltage or current by
external voltage or resistance.
Fluke 5500A Multi Product
Calibrator with
NATA Calibration
FLU,5500A-NATA (4707)
Xantrex XFR 600-4
Power Supply
XAN,XFR600-4 (8112)
AU
2.8kW programmable DC power
supply 0 to 600V, 0 to 4A. RS-232 and isolated analogue control options.
Xantrek XKW60-50 60V 50A DC Power Supply
XAN,XKW60-50 (8115)
AU
3 KW DC power supply, 0-60V, 0-50A. Constant current & constant voltage.
Isolated analogue programming. Operation of multiple units in series or
parallel is possible.
Genrad 1433B 1.1MΩ 6 Decade Resistance
Spectrum Analysers - Low Frequency
GR,1433B-NATA (4702)
(AU)
Six decades by 1Ω to 1.1MΩ. Accuracy 0.01%. NATA calibrated.
See also Spectrum Analyser - High Frequency on page 14 & 16
See also Noise & Sound Analysers on page 72-73
Genrad 1433F 111k 7 Decade Resistance Box
GR,1433F-NATA (4704)
Agilent/HP 35670A 100kHz Spectrum
Analyser
HP,35670A (2480)
AU
Calibrator sources direct voltage
& current, alternating voltage and
current, with multiple waveforms
and harmonics, 2 simultaneous voltage outputs or voltage & current.
Simulates power with phase control, resistance, capacitance, thermocouples
and RTDs. Selectable ranges include the following outputs VDC from 0 to
1.02kV, VAC from 1mV to 1.02kV with output from 10Hz to 500kHz. AC
current from 0.01μA to 11A with output from 10Hz to 10kHz. DC current
from 0 to 11A. Resistance values from short circuit to 330MΩ. Capacitance
values from 330pF to 1,100μF. Temperature t/c B, C, E, J, K, L, N, R, S, T, U,
RTD Pt385 100Ω, Pt3926 100Ω, Pt3916 100Ω, Pt385 200Ω, Pt385 500Ω,
Pt385 1kΩ, Ni120 120Ω & Cu427 10Ω.
(AU)
Seven decades by 0.01Ω to 111k. Accuracy 0.01% +0.002Ω. Useful for
platinum resistance thermometer calibration. NATA calibrated.
AU
Quad channel 122μHz to 102.4kHz spectrum
analyser. Up to 1600 line resolution. Displays
frequency response, power spectrum, linear
spectrum, coherence, cross spectrum, power
spectral density, and time. Signal sources: Fixed & swept sine, arbitrary
waveform, random noise, chirp. Built-in disk drive. HPIB plotter interface.
Bandwidth is 102.4, 51.2 and 25.6KHz for single, dual and quad channel
measurements respectively.
Genrad 1433-20 11.1111kΩ
6 Decade Resistor
GR,1433-20
(MY)
Six decades by 0.01Ω per step to
11.1111kΩ. High accuracy 0.01% up to 10MΩ steps. Low temperature
coefficient, 5ppm/˚C. Good frequency characteristics, excellent stability
(10ppm/yr, 25ppm/3yrs), low zero resistance (1MΩ per decade). May be used
for RTD stimulation. Rack mount option.
TV Test Equipment
Logic Analysers/PROM Programmers
See also Network Analysers/Antenna & Cable Test on page 16 & 18
HP 1662A 68 Channel Logic Analyser
HP,1662A (1570)
Promax TV Explorer Prodig-5
PRO,PRODIG-5 (1727)
For the installation, maintenance and surveillance
of terrestrial, satellite and cable TV systems.
Automatically provides information about the
channels available in the network and their quality.
Displays analogue and digital channel picture.
Includes a high resolution spectrum analyser
function and MPEG decoding. Foxtel approved.
IceTech LV48 Programmer
Promax Prolink 4C Premium
Analogue/Digital TV Test Set
PRO,PROLINK4C-PREM (1729)
AU/MY
Timing analysis 250MHz all channels, 500MHz half channels. Transitional:
125MHz all channels, 250MHz half channels. Glitch: 125MHz half
channels. State analysis to 100MHz on all channels. Memory 4k/channel,
8k/channel in half-channel modes. 4 clock channels available. HPIB &
RS232C ports. In-built DOS format FDD used to load inverse assemblers
& transfer measurement data to a computer. Compatible with most HP
preprocessors & inverse assemblers.
AU
ICE,LV48 (1580)
AU
Eprom programmer for single device with laptop & preloaded software.
Programs devices up to 48 pins.
AU
Measures terrestrial, satellite and cable
TV systems including analogue and digital
VHF & UHF bands. Built in colour monitor provides measurement readout
and can be used to display video signal. Measurement functions include
spectrum analysis, direct signal level readout, carrier to noise, channel
power, digital carrier to noise, digital bit error ratio (BER) and digital QAM
constellation. DVB digital TV channel identifier. Logs to PC and includes
software for remote control and channel plan management.
Our ex-rental sales list is sent electronically.
To receive a copy please email your details to
saleslist@techrentals.com.au
12
ELECTRONICS
www.techrentals.com.au
Gauss/Tesla Meters
E & H Field Strength Meters cont’d.
FW Bell Gauss/Tesla Meter
Holaday HI-3627 Magnetic Field Meter
BEL,4190 (1969)
AU
HOL,HI-3627 (1980)
Handheld digital ELF gauss meter. Maintains
accuracy regardless of orientation. Applications
include detecting magnetic field emissions from
overhead AC power lines, video display terminals,
office equipment and household appliances.
Analogue o/p, data logging, auto range 0.1 to 1999
mG, minimum resolution 0.1mG/.01 uT.
AU
Three orthogonal field sensors. Dynamic
range 0.2mG to 20G. True RMS detection.
Frequency range 5Hz to 2kHz with an in-built
30Hz high pass filter. Meets requirements of
the Swedish protocol and the IEEE P-1140
protocol.
Narda 8616 Radiation Hazard Monitor
FW Bell 5180 Gauss/Tesla Meter
NAR,8616 (1950)
BEL,5180 (1960)
Magnetic measuring equipment, portable gaussmeter.
Functions include Auto Zero, Min/Max/Peak Hold,
Auto Range and Relative Mode. Displays in Gauss,
Tesla or Ampere/Meter. With Hall effect transverse
probe. Bandwidth DC to 30kHz, ranges 300G to
30kG, resolution 0.1G. Analogue output (±3V FS) and
USB interface. Battery operated.
Narda NBM-550 E Field Strength Meter
NAR,NBM-550 (1930)
AU
Facilities: store and recall 99 samples, hold.
Analogue peak with digital storage. Auto and
manual ranges. Automatic reading conversion
between different units. (Note 1mT = 10G).
Ranges 0 to more than 3T resolution 1mT;
299.9mT resolution 100μT; 29.99mT resolution
10μT; 2.999mT resolution 2μT. Accuracy (at
20C): ± 1%. Frequency range: DC and 15Hz to
10kHz. Functions: DC, DC peak, AC RMS, AC
RMS max, & AC peak.
EMC & Power Disturbance
Simulators
Laplace SA1000 EMC Test System
LAP,SA1000 (8370)
Schaffner 438 30kV Static Discharge Generator
See also Radiation Montioring & Protection on page 74
SFN,438 (8375)
AU
Isotropic RF radiation monitor. E-field &
H-field probes spanning 500kHz to 6GHz
(E-field) & 5 to 300MHz (H-field). Operates
from batteries.
Schaffner Automated Step Transformer
SFN,INA-6502 (8385)
Holaday HI-3004 E Field Strength Meter
AU
Integrated function unit to Modula system. Power line dips to 0%, 40%,
70% and 80%. Complies with EN/IEC 61000-4-11. Includes EUT power
control switch.
AU
Isotropic broadband field strength meter designed primarily to measure low
level fields for EMI/EMC studies. Meter scale calibrated in v/m, with pointer
deflection proportional to v 2/m2. Supplied with HSE high sensitivity E-field
probe & STE E-Field probe. HSE probe has 4 ranges, 1v/m to 30v/mFS,
0.5 to 1,500MHz. STE probe has 4 ranges 100v/m to 3,000v/mFS, 0.5MHz
to 6GHz. Recorder output (0 to 1VDC).
Schaffner Modula-6100
Immunity Test System
SFN,MODULA 6100 (8380)
AU
Multifunction
generator
to
simulate
electro-magnetic field interference effects
for immunity testing in conformity with
international, national and in house standards
including the new IEC/EN standards.
Generates Interference pulses such as burst
and surge and power quality simulations.
Holaday HI-3604 LF E & H Field Monitor
HOL,HI-3604 (1945)
AU
Generates an electrostatic charge in a range
from 2 to 30kV. This instrument is in a ‘gun’ form.
Has a removable discharge network which can
be interchanged with other (optional) impedance
networks. Performs test to IEC61000-4-2 (AKA, IEC
1000-4-2) standards.
Holaday HI-3002 E & H
Field Strength Meter
HOL,HI-3004 (1935)
AU
Comprises PC controlled spectrum analyser 10kHz to 1.1GHz,
SA1020 pre-amplifier, RF200 broadband antenna 30MHz to 1GHz,
TTI LISN1600 LISN, and RF100 E-field & H-field probes. Supplied
with notebook PC and EMC software. EMC compliance test system.
E & H Field Strength Meters
HOL,HI-3002 (1940)
AU
Broadband field strength meter. Applications include
measuring field strengths to comply with general safety
regulations and actual radiated power.
Measuring
broadcasting, radar, cell towers, and other transmission
sources. Includes GPS position, data logging and voice
recording for comments.
Hirst GM04 Microprocessor Controlled
Gaussmeter
HMI,GM04 (1975)
AU
Radio frequency radiation monitor. Battery operated with analogue
meter and recorder output (3VDC full scale). H field probe (8633) has
a frequency range of 10 to 300MHz over a range of 0.05 to 100mW/cm2;
frequency range up to 200MHz is calibrated to NATA standard.
AU
AU/MY
Low frequency field meter. Designed to evaluate electric and magnetic
fields associated with 50Hz power lines. Frequency range 30 to 2,000Hz.
Measures magnetic fields from 0.1mG to 20G. Measures electric fields
from 1V/meter to 200kV/meter. LCD display. 127 reading data memory.
Meets the interim requirements of the Australian Radiation Laboratory for
normal levels of AC power exposure.
13