WRT3036 AND WCT3036 SERIES WOOD-BURNING FIREPLACES Framing Dimensions 17-3/8 (442) 24-1/2 (623) Maintain 3/4" Clearance at Sides and Back of Fireplace 52-1/4 (1378) 41-3/4 (1061) 3/4" Clearance Not Required at Nailing Flanges 21-7/8 (556) 41-3/4 (1061) 73-7/8 (1877) Inches (millimeters) Parallel Framing Dimensions Corner Framing Dimensions 22 (559) 29 (737) 14-1/4 (362) Fireplace Dimensions 20-1/2 (521) 11-3/4 (299) 32-1/2 (826) 41 (1042) 5/8 (16) Top View Top View 1 (26) Electrical Outlet Right Side View Gas Line Knock Outs 9-1/8 41-1/4 (1048) 3-1/2 (89) (232) 21 (534) 37 (940) 7-1/8 (181) 8-3/4 (223) Air Kit Knock Out 11-1/4 (286) Left Side View Gas Line Knock Outs 8 (204) 35 (889) 11-1/2 (292) 9-1/8 3-1/2 (89) (232) 41 (1042) 1 (26) Inches (millimeters) Front View 8-3/4 (223) 14-1/2 (369) NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. P/N 900729-01, REV. NC, 06/2016 Page 1 of 2 Product Reference Information Cat. No. Model F0647 F0648 Listing Information Product Information WRT3036 AND WCT3036 SERIES Product Reference Information Desc. Shipping Weight Shipping Volume Cat. No. Model Desc. Shipping Weight Shipping Volume WRT3036RS Radiant 184 lb. 23.8 cu. ft. F0659 WRT3036WS Radiant 184 lb. 23.8 cu. ft. WRT3036RSI Radiant 184 lb. 23.8 cu. ft. F0660 WRT3036WSI Radiant 184 lb. 23.8 cu. ft. F0649 WRT3036RH Radiant 184 lb. 23.8 cu. ft. F0661 WRT3036WH Radiant 184 lb. 23.8 cu. ft. F0650 WCT3036RS Louver 184 lb. 23.8 cu. ft. F0662 WCT3036WS Louver 184 lb. 23.8 cu. ft. F0651 WCT3036RSI Louver 184 lb. 23.8 cu. ft. F0663 WCT3036WSI Louver 184 lb. 23.8 cu. ft. F0652 WCT3036RH Louver 184 lb. 23.8 cu. ft. F0664 WCT3036WH Louver 184 lb. 23.8 cu. ft. Min. Clearance Ceiling 40 (1016) Back and sides of fireplace 3/4 (19)* Floor 0 (0)** Perpendicular wall to opening 12 (305) Top spacers Chimney outer pipe surface Report No. 10-078 Combustible Material Safe Zone for Projection of Combustible Materials Mantel 6 (153) Ref. 1 (26) 33° Non- Combustible Material Below Top Spacer 3 (77) Nom. Clearances US This fireplace has been tested and approved by PFS Corporation under UL127/ULC-S610 standard as a Factory Built Appliance and may be used with gas logs approved to ANSI Z21.60, Z21.84 or Z21.11.2 standards. 12-1/4 (312) Ref. * Not required at nailing flanges ** See step 2 of Framing in the Installation and Operation Manual Side Wall Clearances 1-1/2 (38) Max. 9 (229) Min. 15 (381) Min. Firebox Louvered Models 8 (204) Top of louver opening 2 (51) Max. SAFE ZONE Min. to Perpendicular Side Wall 12 (305) Upper Section of Fireplace 12 (305) Min. 3 (77) 33° Fireplace Opening Combustible Material Must Not Overlap Front Face Inches (millimeters) Return Elbow Offset Elbow Venting ® Side View 0 (0) Top View C Mantel Clearances Clearances to Combustibles Description PFS Venting Uses Standard (8DM) and Hi-Temp (8HT) Wood-Burning Chimney. For Canada Use 8HT Chimney Offset Elbow 6' (1.8 M) Max. Return Elbow 6' (1.8 M) Max. Return Elbow 6' (1.8 M) Max. Offset Elbow Offset Elbow A Printed in U.S.A. © 2016 Innovative Hearth Products P/N 900729-01 REV. NC 06/2016 Return Elbow 6' (1.8 M) Max. B Offset Elbow Return Elbow Ceiling Support Pipe 12S-8DM 6' (1.8 M) Max. 6' (1.8 M) Max. C Page 2 of 2