Electronic Troubleshooting, Fourth Edition
Author: Daniel Tomal, Aram Agajanian
ISBN-13: 9780071819909
Pub Date: JUNE 2014
Price:
$ 96.00 AUD
$ 108.00 NZD
Edition: 4
Previous ISBN: 9780071423076
Subject: Science - Physics / Electricity
Trim Height: 24 cm
Trim Width: 19 cm
Pages: 512
Format: Softcover
INTRODUCTION
The most complete, up-to-date guide to troubleshooting and repairing electrical and
electronic devices
•
•
•
Provides technicians with a wealth of problem-solving methods and information on
troubleshooting theory, techniques, and practices
Updated coverage of the latest digital electronics and microprocessor-based systems
Features detailed photos, diagrams, and schematics
DESCRIPTION
The most complete, up-to-date guide to troubleshooting and repairing
electrical and electronic devices
Electronic Troubleshooting, Fourth Edition provides technicians with a wealth of problem-solving
methods and information on troubleshooting theory, techniques, and practices for a wide variety
of electrical and electronic devices. Special emphasis is placed on the digital electronics and
microprocessor-based systems that are used in today’s industrial and personal applications.
Electronic devices covered in the new edition include: electronic components (transistors, diodes,
rectifiers, capacitors); electric motors and generators; industrial controls; residential and industrial
wiring; radio and television; digital circuits; combinational and sequential digital circuits;
microprocessor-based systems; computer networking; embedded microprocessor systems.
Comprehensive coverage:
•
•
•
•
•
Brand-new material on embedded microprocessor systems and smart technologies;
advanced computer microprocessors; computer interface networking and troubleshooting;
new modern medical diagnostic equipment
Step-by-step troubleshooting methods
Detailed pictures and schematics of products and devices
Complex circuitry presented in a simplified manner
Safety practices for troubleshooting and maintaining electronic devices
ABOUT THE AUTHOR
Daniel R. Tomal, Ph.D., has taught many electrical and electronics courses at the high school,
junior college, trade school, and university level. He has worked in industry and consulted for
numerous companies, and was voted the outstanding professor at Purdue University, where he
taught in the technology and engineering department. Dr. Tomal has written 12 books and over
100 articles and studies. He is currently an adjunct professor teaching electronics at the Illinois
Institute of Technology in Chicago.
Aram S. Agajanian, Ph.D., is a senior professor at DeVry University in Chicago. He holds a B.S.
in Electrical Engineering from University of Rochester, a M.S. in Electrical Engineering from
Syracuse University, and a Ph.D. in Educational Leadership from Colorado State University. Dr.
Agajanian teaches computer networking, electronics, computer, and biomedical engineering
technology courses at Devry, and has 10 years of industrial experience in electrical engineering.
His research interests include electronic and digital circuits and understanding the issues that
affect enrollment and retention of female students in science, math, engineering and technology
(SMET). Dr. Agajanian is also interested in teaching methods such as brain-based teaching,
constructivism, team teaching, and active learning that might improve the quality of engineering
education.
Project Management for Engineering and Construction, 3e
Author: Garold (Gary) Oberlender
ISBN-13: 9780071822312
Pub Date: JULY 2014
Price:
$ 152.00 AUD
$ 172.00 NZD
Edition: 3
Previous ISBN: 9780070393608
Subject: Technology & Engineering - Project
Management
Trim Height: 23 cm
Trim Width: 16 cm
Pages: 448
Format: Hardcover
INTRODUCTION
A unique professional construction project management resource for engineers involved
in the early stages of project development
Project Management for Engineering and Construction, Third Edition is a fully updated,
professional version of a renowned project management text, ideal for civil, structural, chemical,
and mechanical engineers.
The book focuses on influencing the overall project quality, cost, and schedule by getting involved
in decision-making at the initial design phase. The impact of engineering design on the
construction phase of a project is fully discussed. Detailed examples are included throughout.
•
•
•
Follows the 7 steps of a project, from definition to close out
New chapter on risk assessment and risk analysis
Perfect study material for the NCEES (National Council of Examiners for Engineering and
Surveying), professional engineer (PE), and other licensing exams
DESCRIPTION
An up-to-date, professional construction project management resource
for engineers involved in the early stages of project development
Project Management for Engineering and Construction, Third Edition is a fully updated,
professional version of a renowned project management text, ideal for civil, structural, chemical,
and mechanical engineers. The book focuses on getting involved in decision-making at the initial
design phase to influence the overall project quality, cost, and schedule as early in the process as
possible. The impact of engineering design on the construction phase of a project is fully
discussed. Detailed examples are included throughout this unique resource.
•
•
•
Follows the 7 steps of a project, from definition to close out
New chapter on risk assessment and risk analysis
Perfect study material for the NCEES (National Council of Examiners for Engineering and
Surveying), professional engineer (PE), and other licensing exams
ABOUT THE AUTHOR
Garold Oberlender, Ph.D. (Stillwater, OK) was professor and coordinator of the graduate
program in construction engineering and project management in the School of Civil Engineering at
Oklahoma State University. He is the coauthor of Estimating Construction Costs, Fourth Edition.
Preparing a Building Service Life Plan for Green Buildings
Author: Dru Meadows
ISBN-13: 9780071834421
Pub Date: MAY 2014
Price:
$ 82.00 AUD
$ 92.00 NZD
Edition: 1
Previous ISBN:
Subject: Technology & Engineering Environmental / General
Trim Height: 23 cm
Trim Width: 16 cm
Pages: 288
Format: Hardcover
INTRODUCTION
The only book on the market to guide engineers and building managers
through preparing a building service life plan for a green building
examines materials life cycle, reuse, and end-of-life disposal.
Preparing a Building Service Life Plan for Green Buildings uniquely adapts the traditional practice
of building service life planning (BSLP) to address the specific needs of green buildings, filling a
void in the market for this information.
The plan presented in the book describes not only repair and maintenance for promoting the
durability of major buildings elements, but also expectations for their removal, reuse, dismantling,
and disposal at the end-of-life. Life cycle performance and costs are addressed. This book provides
much-needed guidance for structural and environmental engineers, architects and contractors,
building managers, and maintenance personnel.
•
Provides a template for creating a green building BSLP
•
•
Describes product selection, maintenance, repair, and end-of-life removal and reuse
Bonus downloadable software and content included
DESCRIPTION
Expert guidance on developing a green building service life plan
Filled with step-by-step instructions, Preparing a Building Service Life Plan for Green Buildings
explains how to create a framework for managing the performance requirements and life-cycle
impacts--including end-of-life--of major building elements for the duration of a green building’s
intended lifespan.
The book discusses operation and maintenance; inspections and assessments; repairs, upgrades,
and replacements; documentation; and removal, reuse, recycling, dismantling, and end-of-life
disposal of building components. A customizable template for creating a comprehensive green
BSLP is included in this practical resource.
Covers major building elements:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard foundations
Slab on grade
Basement walls
Floor construction
Roof construction
Exterior walls
Exterior windows and doors
Roof coverings
Interior partitions and doors
Fittings
Stair construction
Wall, floor, and ceiling finishes
Elevators and lifts
Plumbing, HVAC, and electrical
Fire protection
Pedestrian paving
Site development--fences, retaining walls, fountains, and other site improvements
Storm sewer
ABOUT THE AUTHOR
Dru Meadows, principal with the Green Team Inc., is an architect, specifier, author, teacher and
environmentalist with 20+ years of experience in sustainability consulting and green building. She
is the author of the U.S. Federal Green Construction Guide.
Expanders for Oil and Gas Operations
Author: Murari Singh, Michael Drosjack, David Linden
ISBN-13: 9780071799928
Pub Date: JUNE 2014
Price:
$ 172.00 AUD
$ 192.00 NZD
Edition: 1
Previous ISBN:
Subject: Technology & Engineering - Chemical &
Biochemical
Trim Height: 23 cm
Trim Width: 16 cm
Pages: 416
Format: Hardcover
INTRODUCTION
Covers the expanders used to extract power from waste fluid gas in the chemical
process and refining industries
•
•
Authored by recognized world experts and engineers with experience in the design,
application, operation, and troubleshooting of expanders
Addresses the push toward energy conservation, sustainability, green manufacturing, and
green chemistry
DESCRIPTION
Full coverage of the expander machines used to extract power from
waste fluid gas in the chemical process and refining industries
Expanders for Chemical Process describes the engineering analyses required to design and build
expanders for particular applications. In an ever-increasing push toward energy conservation,
sustainability, green manufacturing, and green chemistry, chemical plants are recovering waste
fluid gas energy using expanders. This book explains how to harvest this energy to power other
machines. In each case, there are unique conditions that require specialized design and
applications. This timely guide offers complete details on expanders.
•
•
•
•
•
Written by recognized world experts and engineers with experience in the design,
application, operation, and troubleshooting of expanders
Evaluates existing designs for various applications and considers design modifications and
enhancements
Covers materials of construction, flowpath configuration, rotor and blade designs, pressure
casings, and auxiliaries such as bearings, seals, and cooling
Discusses troubleshooting large, expensive equipment
Describes the operating facilities in which expanders are applied
ABOUT THE AUTHOR
Murari P. Singh, Ph.D., is the President of Safe Technical Solutions, Inc. (SAFETSOL). He has
been involved in the design, development, and analysis of industrial turbomachinery for more than
40 years with Turbodyne Corporation, Dresser Industries, Dresser Rand Company, GE CONMEC,
and most recently, GE Oil & Gas as Consulting Engineer.
Michael J. Drosjack, Ph.D., joined Shell Oil in 1975 as a member of the central Machinery
Engineer Department in Houston, Texas. He retired from Shell in 2009 and since then has been a
private machinery consultant. Through a variety of assignments over his Shell career, Dr.
Drosjack was responsible for providing technical support for rotating and reciprocating machinery
to Shell operations both upstream and downstream primarily in the U.S. but with responsibilities
that extended around the world. He was chairman of the Shell U.S. Machinery Technical Network
for many years.
David H. Linden is President of D.H. Linden Associates, Inc. He has 37 years of turbomachinery
experience in a wide variety of areas that include hot gas expanders, steam turbines, axial
compressors, power turbines, reliability, field engineering, and consulting. A renowned expert on
FCC expanders, nitric acid expanders, and expander installations and applications, Linden has held
positions as at steam turbine design engineer at Westinghouse Electric Corp, expander
engineering supervisor and manager at Ingersoll-Rand, and founding partner of CONMEC, Inc.
Water and Wastewater Calculations Manual, Third Edition
Author: Shun Lin
ISBN-13: 9780071819817
Pub Date: JULY 2014
Price:
$ 172.00 AUD
$ 192.00 NZD
Edition: 3
Previous ISBN: 9780071476249
Subject: Technology & Engineering - Environmental /
Waste Management
Trim Height: 23 cm
Trim Width: 16 cm
Pages: 944
Format: Hardcover
INTRODUCTION
Quick access to the latest calculations for solving water and wastewater problems
•
•
Step-by-step calculations related to natural waters, drinking water purification, and
wastewater treatment processes
Includes new hydraulic calculations, new EPA water and wastewater effluent limits, and
new mathematical models for lake evaporation predication
DESCRIPTION
Step-by-step calculations for solving water and wastewater problems—
fully updated for the latest methods and regulations
Water and Wastewater Calculations Manual, Third Edition provides basic principles and practices
and step-by-step calculations related to natural (source) waters, drinking water purification, and
wastewater treatment processes. This new edition is updated with new developments and
methods, including the latest federal and state regulation requirements.
New to this edition
•
•
•
•
•
New hydraulic calculations for water and wastewater
New U.S. Environmental Protection Agency water and wastewater effluent limits and
applicable calculations
Membrane process calculations included for filtration in water quality and wastewater
treatment
New mathematical models included for lake evaporation predication
SI and standard units included throughout
ABOUT THE AUTHOR
Shun Dar Lin, Ph.D. is one of the world’s leading water and wastewater scientists with more
than 50 years of practical and academic experience in the field. He is Professor Emeritus at the
University of Illinois at Urbana-Champaign. A registered professional engineer in Illinois and in
Taiwan, Dr. Lin has published more than 100 papers, articles, and reports related to water and
wastewater engineering. He has taught and conducted research since 1960 at the Institute of
Public Health of the National Taiwan University. In 1986, Dr. Lin received the Water Quality
Division Best Paper Award for “Giardia lamblia and Water Supply” from the American Water Works
Association. He developed the enrichment-temperature acclimation method for recovery
enhancement of stressed fecal coliform which has been adopted in the Standard Methods for the
Examination of Water and Wastewater since the 18th Edition (1990). Dr. Lin is a life member of
the American Society of Civil Engineers, the American Water Works Association, and the Water
Environment Federation. He currently serves on many Task Force Committees for the Standard
Methods. Dr. Lin was appointed by the Governor of Illinois to the Illinois Pollution Control Board
(2008-2010). He is a consultant to the governments of Taiwan and the United States and for
private firms.p>
Fundamentals of Fluid Film Lubrication
Author: M. K Ghosh, B. C. Majumdar, Mihi Sarangi
ISBN-13: 9780071834971
Pub Date: JULY 2014
Price:
$ 205.00 AUD
$ 230.00 NZD
Edition: 1
Previous ISBN:
Subject: Science - Mechanics / Fluids
Trim Height: 24 cm
Trim Width: 19 cm
Pages: 496
Format: Hardcover
INTRODUCTION
This detailed engineering resource provides thorough coverage of the theory, design,
analysis, and application of fluid film lubrication—essential for reducing friction and
wear in machinery components.
Fundamentals of Fluid Film Lubrication provides an introduction to the full subject of tribology and
the fundamentals of fluid film lubrication used broadly in bearings for rotating machinery, such as
power generating turbines, turbo-generators, pumps, and compressors.
All aspects of fluid film lubrication are discussed, including rotor-bearing dynamics, thermohydrodynamic lubrication, gas lubrication, elastohydrodynamic lubrication, fluid inertia effects and
turbulence in fluid film lubrication, which are generally not discussed in texts available in this area.
•
•
Coverage of both the analytical and numerical methods of solutions in bearing design and
lubrication
Global examples from the authors' experience in the design and analysis of fluid film
•
industries
Covers the viscosity and rheology of lubricants, mechanics of fluid films, hydrodynamic
lubrication dealing with idealized bearings, and finite bearings using both analytical and
numerical methods of solutions
ABOUT THE AUTHOR
Mihir K. Ghosh, Ph.D., was a professor of Mechanical Engineering at IIT Kharagpur and is a
member of the honorary editorial board of the journal, Advances in Vibration Engineering.
Bankim C. Majumdar, Ph.D., was a professor of Mechanical Engineering at IIT Kharagpur,
associate editor of Advances in Tribology, and Member of Editorial Board of the Journal of
Engineering Tribology.
Mihir Sarangi, B.E., M.Tech., Ph.D.,, is an assistant professor of Mechanical Engineering at IIT,
Kharagpur.