A New Reference in
Quality Hand Tools
Würth Canada Limited/Limitée
6330 Tomken Road, Mississauga
Ontario, Canada, L5T 1N2
Tel: (905) 564-6225 - Fax: (905) 564-3671
www.wurthcanada.com
www.facebook.com/WurthCanadaLtd
HOW DOES A PRODUCT
BECOME ZEBRA®?
2
THE STRIPES ARE THE POINT.
The
expectations
for a ZEBRA® product are quite simple:
EXTREME PERFECTION!
For only those products of premium quality with clever problem
solving solutions, perfect ergonomics, constantly optimized
performance, and top efficiency in use, functionality and service life
are given the coveted stripes.
We don't make compromises when it comes to the quality of our
tools. Every product is subjected to endurance tests for days and
sometimes weeks at our testing laboratories. These tests are always
practice-oriented and are usually even much tougher than practical
use itself.
Of course, we test all new products prior to their market introduction,
however in the course of our ongoing quality assurance we also
continually test products from our existing product range.
3
3/8" Standard Hex Socket Assortment
Art. No. 965.1219
Contents: 19 pieces
• Supplied in a metal box and a high-quality
foam insert to hold each piece in place.
• Box: 315 x 115 x 40 mm.
NOTE: Articles in red are Special Orders only!
Designation
Ratchet
Extension bar
Extension bar
Universal joint
Tip
Length
250 mm
125 mm
250 mm
55 mm
Art. No.
712.0380
712.128105
712.128110
712.128301
Qty.
1
1
1
1
3/8” High-Performance Ratchet
• Easy handling and maximum service life.
• Drive: 10 mm / 3/8”.
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating angle.
• Chrome-plated with anti-slip 2-component handle resistant to general
workplace oils and cleaners.
• Top quality, tested by German TÜV SÜD product service.
• Handy directional switch for easy switching, even with oily fingers; can
be operated with one hand.
• Chamfer on square enables easier pull-off as better gripping is
possible.
• Offset ratchet body enables more clearance for gripping with screw
connections.
Inch
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
19/32
5/8
11/16
3/4
25/32
13/16
7/8
4
L1
mm
25.5
25.5
25.5
25.5
25.5
25.5
25.5
27
27
27
27
29
29
29
31
D1
mm
10
10.9
11.8
13
14.3
16
18.4
20
20.9
22
23.9
25.6
27.1
27.9
30
D2
mm
17
17
17
17
17
17
17
18
19
20
21
22.5
23.5
24.5
26
t
mm
7
8
8
8
8
8
9
14
14
14
14
15
15
15
17
Art. No.
713.121201
713.121202
713.121203
713.121204
713.121205
713.121206
713.121207
713.121208
713.121209
713.121210
713.121211
713.121212
713.121213
713.121214
713.121215
Qty.
1
Designation Tip
Sizes
15 sockets
1/4" - 7/8"
Metal box
Foam insert
-
315 x 115 x 40 mm
310 x 110 x 35 mm
3/8” Universal Joint
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 3/8”, ball groove.
• Output drive: 3/8”.
• Joint: spring-loaded, stays in set position.
3/8” Extension Bars
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 3/8” ball groove.
• Output drive: 3/8”.
Art. No.
712.121201713.121215
955.7152
955.1219
Qty.
1
1
1
1/2" Standard Hex Socket Assortment
Art. No. 965.1321
Contents: 21 pieces
• Supplied in a metal box and a high-quality
foam insert to hold each piece in place.
• Box: 405 x 160 x 50 mm.
Note: Articles in red are Special Orders
only!
Designation
Ratchet
Extension bar
Extension bar
Universal joint
Tip
Length
250 mm
125 mm
250 mm
70 mm
Art. No.
712.0120
712.138105
712.138110
712.138301
Qty.
1
1
1
1
1/2” High-Performance Ratchet
• Easy handling and maximum service life.
• Drive: 12.5mm / 1/2”.
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating angle.
• Chrome-plated with anti-slip 2-component handle resistant to general
workplace oils and cleaners.
• Top quality, tested by German TÜV SÜD product service.
• Handy directional switch for easy switching, even with oily fingers; can
be operated with one hand.
• Chamfer on square enables easier pull-off as better gripping is
possible.
• Offset ratchet body enables more clearance for gripping with screw
connections.
Inch
3/8
7/16
1/2
9/16
19/32
5/8
11/16
3/4
25/32
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
L1
mm
38
38
38
38
38
38
38
38
38
38
41
41
41
44
44
44
44
D1
mm
16.1
17.9
19.1
20.6
21
22.9
24.6
26.5
27.9
28.5
29.9
32
34
36
37.7
40
42
D2
mm
21.9
21.9
21.9
21.9
21.9
21.9
21.9
24.7
25.5
25.5
26.5
29
30
32.2
33.5
36
38.1
t
mm
12
12
12.5
13
13
13
13
19
19
19
22.5
22.5
22.5
25.5
25.5
25.5
25.5
Art. No.
712.131201
712.131202
712.131203
712.131204
712.131205
712.131206
712.131207
712.131208
712.131209
712.131210
712.131211
712.131212
712.131213
712.131214
712.131215
712.131216
712.131217
Designation Tip
Sizes
17 sockets
3/8" - 1-1/4"
Metal box
Foam insert
-
405 x 160 x 50 mm
400 x 150 x 40 mm
Art. No.
712.131201713.131217
955.7153
955.1321
Qty.
1
1
1
1/2” Universal Joint
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 1/2”, ball groove.
• Output drive: 1/2”.
• Joint: spring-loaded, stays in set position.
1/2” Extension Bars
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 1/2” ball groove.
• Output drive: 1/2”.
Qty.
1
5
1/2" Multi-Socket
Spanner Assortment
Art. No. 965.13023 - 23 pieces
• Supplied in a metal box and a high-quality
foam insert to hold each piece in place.
• Box: 405 x 160 x 50 mm
(approx.: 16 x 6 5/16 x 2”).
Note: Articles in red are Special Orders
only!
Designation Tip
Ratchet
Extension Bar
Extension Bar
Universal Joint
Length
250 mm
125 mm
250 mm
70 mm
Art. No.
712.012
712.138105
712.138110
712.138301
1/2” Universal Joint
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 1/2”, ball groove.
• Output drive: 1/2”.
• Joint: spring-loaded, stays in set position.
1/2” Extension Bars
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 1/2” ball groove.
• Output drive: 1/2”.
1
6
Length
Art. No.
Qty.
712.1341036 - 44 mm
712.13432
1
405 x 160 x 50 mm 955.7153
400 x 150 x 40 mm 955.13230
• Handy directional switch for easy switching,
even with oily fingers; can be operated with
one hand.
• Chamfer on square enables easier pull-off as
better gripping is possible.
• Offset ratchet body enables more clearance
for gripping with screw connections.
Note: This is a metric set. Standard sizes are only
Outside
6 sided
Torx
4-sided
approximate equivalencies and may not work in
all applications!
L1
in mm in mm
Designation
Tip
19 multi-sockets, 1
ea., 10-32 mm
Metal box
Foam insert
1/2” High-Performance Ratchet
• Easy handling and maximum service life.
• Drive: 12.5mm / 1/2”.
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating
angle.
• Chrome-plated with anti-slip 2-component
handle resistant to general workplace oils and
cleaners.
• Top quality, tested by German TÜV SÜD
product service.
Possible uses
Multi- 6/12
profile sided/12
Qty.
bolt sz head sz in TX
D1
D2
t
Qty.
in mm in mm in mm in mm in mm Art. No.
10
10
1/4"
3/8"
E12
8 mm
36
15.5
23
9
712.13410
11
11
1/4"
7/16"
E14
9 mm
36
16.7
23
10
712.13411
12
12
-
15/32" E16
10 mm 36
18
23
11
712.13412
13
13
5/16"
1/2"
-
-
36
19.2
23
11
712.13413
E18
-
36
20.5
23
13
712.13414
12 mm 36
21.7
23
13
712.13415
14
14
3/8"
9/16"
15
15
-
19/32" -
16
16
7/16"
5/8"
E20
13 mm 36
23
23
13
712.13416
17
17
-
-
-
14 mm 36
24.2
23.2
13
712.13417
18
18
-
-
E22
-
36
25.5
23.5
14
712.13418
19
19
1/2"
3/4"
E24
-
36
26.7
24.7
14
712.13419
20
20
-
25/32" -
28
25.5
14
712.13420
16 mm 36
21
21
9/16"
13/16" E26
17 mm 38
29.2
26
14
712.13421
22
22
-
7/8"
18 mm 38
30.5
26.5
16
712.13422
E28
24
24
5/8"
15/16" E30
19 mm 38
33
29
18
712.13424
26
26
-
-
21 mm 38
35.5
31.5
18
712.13426
E32
27
27
-
1-1/16" E34
22 mm 44
36.7
32.2
20
712.13427
28
28
3/4"
1-1/8"
E36
23 mm 44
38
33.5
20
712.13428
30
30
-
1-3/16" E38
24 mm 44
40.5
36
22
712.13530
32
32
-
-
26 mm 44
43
38.1
24
712.13432
E40
1
1/2" AND 1/4" MULTI-Socket Assortment
Article #: 965.17056 - Qty. 1
Contents: 56 pieces
• Supplied in a metal box and a high-quality
foam insert to hold each piece in place.
• 19 1/2" multi-sockets.
• 12 1/4" multi-sockets.
• 15 1/4" bits.
• Box: 350 x 260 x 55 mm.
1/2" and 1/4" Universal Joints
• Standards: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drives: 1/2” and 1/4", ball groove.
• Output drive: 1/2” and 1/4".
• Joint: spring-loaded, stays in set position.
1/2" and 1/4" Extension Bars
• Standards: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drives: 1/2” and 1/4", ball groove.
• Output drives: 1/2” and 1/4".
1/2" and 1/4" High-Performance
Ratchets
• Easy handling and maximum service life.
• Drive: 1/2" (12.7 mm) and 1/4" (6.35 mm).
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating
angle.
• Chrome-plated with anti-slip 2-component
handle resistant to general workplace oils and
cleaners.
Designation
Tip
1/2" Ratchet
1/2" Extension bar
1/2" Extension bar
1/2" Universal joint
1/2" Multi-use sockets,
sizes 10 through 20
1/2" Multi-use sockets,
sizes 21, 22, 24 & 26
1/2" Multi-use sockets,
sizes 27, 28, 30 & 32
1/4" Ratchet
1/4" Extension bar
1/4" Extension bar
1/4" Universal joint
1/4" Drive Screwdriver
1/4" Multi-use sockets,
sizes 4 through 14
1/4" Adapter with
quick change chuck
Length
250 mm
125 mm
250 mm
70 mm
36 mm
38 mm
44 mm
138 mm
100 mm
150 mm
33 mm
216 mm
22 mm
30 mm
• Top quality, tested by German TÜV SÜD
product service.
• Handy directional switch for easy switching,
even with oily fingers; can be operated with
one hand.
• Chamfer on square enables easier pull-off as
better gripping is possible.
• Off set ratchet body enables more clearance
for gripping with screw connections.
Article #
712.0120
712.138105
712.138110
712.138301
712.13410 to
712.13420
712.13421 to
712.13426
712.13427 to
712.13432
712.0140
713.118104
713.118106
713.118301
613.430310
713.11304 to
713.11314
715.1101
Qty.
1
11
4
1
Designation
Hex drive Size 3
Hex drive Size 4
Hex drive Size 5
Hex drive Size 6
Phillips drive PH1
Phillips drive PH2
Phillips drive PH3
Torx drive TX10
Torx drive TX15
Torx drive TX20
Torx drive TX25
Torx drive TX27
Torx drive TX30
Torx drive TX40
1/4" Drive Screwdriver
• Ergonomically shaped handle.
• Grip: 2-component handle
• Input drives: 1/4", ball groove.
• Output drive: 1/4"
Note: Articles in red are
Special Orders only!
Tip
Length
25 mm
1
Metal box
Foam insert
Qty.
1
614.175653
Slot drive 0.8 x 5.5
12
Article #
614.17693
614.17694
614.17695
614.17696
614.176274
614.176461
614.176648
614.3110
614.3115
614.3120
614.3125
614.3127
614.3130
614.3140
-
-
955.7154
955.1756
7
1/2" AND 1/4" MULTI-Socket Assortment
Article #: 965.17056 - Qty. 1
Ratchet
size
1/4"
1/2"
8
Multiprofile
Possible uses
6 Sided 12 Sided 6 sided standard
Outside
metric
metric
Bolt size Head size torx
4 mm
5 mm
5.5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
20 mm
21 mm
22 mm
24 mm
26 mm
27 mm
28 mm
30 mm
32 mm
4 mm
5 mm
5.5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
20 mm
21 mm
22 mm
24 mm
26 mm
27 mm
28 mm
30 mm
32 mm
4 mm
5 mm
5.5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
20 mm
21 mm
22 mm
24 mm
26 mm
27 mm
28 mm
30 mm
32 mm
5/32"
E5
7/32"
E8
9/32"
#10, #12 5/16"
11/32"
1/4"
3/8"
1/4"
7/16"
15/32"
5/16"
1/2"
3/8"
9/16"
1/4"
3/8"
1/4"
7/16"
15/32"
5/16"
1/2"
3/8"
9/16"
19/32"
7/16"
5/8"
1/2"
3/4"
25/32"
9/16"
13/16"
7/8"
5/8"
15/16"
1-1/16"
3/4"
1-1/8"
1-3/16"
-
4 Sided
4 mm
4.5 mm
5 mm
E10
E12
E14
E16
8 mm
9 mm
10 mm
E18
E12
E14
E16
E18
E20
E22
E24
E26
E28
E30
E32
E34
E36
E38
E40
8 mm
9 mm
10 mm
12 mm
13 mm
14 mm
16 mm
17 mm
18 mm
19 mm
21 mm
22 mm
23 mm
24 mm
26 mm
Note: This is a metric set. Standard sizes are
only approximate equivalencies and may
not work in all applications.
L1 in D1 in D2 in t in
mm mm mm mm Article #
Qty.
22
6.8
11.9 5
713.11304
22
8.1
11.9 5
713.11305
22
8.7
11.9 5.5
713.113055
22
9.3
11.9 6
713.11306
22
10.8 11.9 6
713.11307
22
11.9 11.9 7
713.11308
22
13.4 13.4 7
713.11309
22
14.5 14.5 10
713.11310
22
15.9 15.9 10
713.11311
22
16.9 16.9 10
713.11312
22
18
18
11
713.11313
22
19.6 19.6 11
713.11314
36
15.5 23
9
712.13410
36
16.7 23
10
712.13411
36
18
23
11
712.13412
36
19.2 23
11
712.13413 1
36
20.5 23
13
712.13414
36
21.7 23
13
712.13415
36
23
23
13
712.13416
36
24.2 23.2 13
712.13417
36
25.5 23.5 14
712.13418
36
26.7 24.7 14
712.13419
36
28
25.5 14
712.13420
38
29.2 26
14
712.13421
38
30.5 26.5 16
712.13422
38
33
29
18
712.13424
38
35.5 31.5 18
712.13426
44
36.7 32.2 20
712.13427
44
38
33.5 20
712.13428
44
40.5 36
22
712.13530
44
43
38.1 24
712.13432
3/8" Multi-Socket
Spanner Assortment
Art. No. 965.12022 - 22 pieces
• Supplied in a metal box and a high-quality
foam insert to hold each piece in place.
• Box: 315 x 115 x 40 mm
(approx.: 12-3/8 x 4-1/2 x 1-9/16").
Note: Articles in red are Special Orders
only!
Designation Tip
Ratchet
Extension Bar
Extension Bar
Universal Joint
Length
175 mm
125 mm
250 mm
55 mm
Art. No.
712.038
713.128105
713.128110
713.128301
3/8” Universal Joint
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 3/8”, ball groove.
• Output drive: 3/8”.
• Joint: spring-loaded, stays in set position.
3/8” Extension Bars
• Standard: DIN 3123, ISO 3316.
• Finish: chrome-plated.
• Input drive: 3/8” ball groove.
• Output drive: 3/8”.
1
Length
Art. No.
Qty.
713.12306 25.5 - 31 mm
713.12322
1
315 x 115 x 40 mm 955.7152
312 x 113 x 34 mm 955.12022
• Handy directional switch for easy switching,
even with oily fingers; can be operated with
one hand.
• Chamfer on square enables easier pull-off as
better gripping is possible.
• Offset ratchet body enables more clearance
for gripping with screw connections.
Note: This is a metric set. Standard sizes are only
Outside
6 sided
Torx
4-sided
approximate equivalencies and may not work in
all applications!
L1
in mm in mm
Designation
Tip
18 multi-sockets, 1
ea., 6-22 mm
Metal box
Foam insert
3/8” High-Performance Ratchet
• Easy handling and maximum service life.
• Drive: 10mm / 3/8”.
• Standard, DIN 3122, ISO 3315.
• Head: fine-toothed, 72 teeth, 5° rotating
angle.
• Chrome-plated with anti-slip 2-component
handle resistant to general workplace oils and
cleaners.
• Top quality, tested by German TÜV SÜD
product service.
Possible uses
Multi- 6/12
profile sided/12
Qty.
bolt sz head sz in TX
D1
D2
t
Qty.
in mm in mm in mm in mm in mm Art. No.
6
6 mm
-
-
E8
5 mm
25.5
9.3
17
7
713.12306
6.3
6.3 mm
-
1/4”
-
-
25.5
9.9
17
7
713.123063
7
7 mm
-
9/32”
-
-
25.5
10.9
17
7
713.12307
8
8 mm
-
5/16”
E10
-
25.5
11.8
17
8
713.12308
9
9 mm
-
11/32” -
-
25.5
13.4
17
8
713.12309
10
10 mm
-
3/8”
E12
8 mm
25.5
14.6
17
8
713.12310
E14
9 mm
25.5
11
11 mm
1/4”
7/16”
12
12 mm
-
15/32” E16
10 mm 25.5
15.9
17
8
713.12311
17
17
8.5
713.12312
13
13 mm
5/16”
1/2”
-
-
25.5
18.4
17
8.5
713.12313
14
14 mm
3/8”
9/16”
E18
-
27
19.6
18
13
713.12314
15
15 mm
-
19/32” -
12 mm 27
20.9
19
13
713.12315
16
16 mm
7/16”
5/8”
E20
13 mm 27
22
20
13
713.12316
17
17 mm
-
-
-
14 mm 27
23.4
21
13
713.12317
18
18 mm
-
-
E22
-
27
24.5
21.5
13
713.12318
19
19 mm
1/2”
3/4”
E24
-
29
25.6
22.5
14
713.12319
20
20 mm
-
25/32” -
16 mm 29
26.8
23.5
14
713.12320
21
21 mm
9/16”
13/16” E26
17 mm 29
27.9
24.5
14
713.12321
22
22 mm
-
7/8”
18 mm 31
29.6
26
16
713.12322
E28
1
9
1/4" Multi-Use Socket Set
Art. No. 965.11032 - 32 pieces
• Supplied in a metal box with high-quality foam
insert compartment with clamping effect.
• 12 sockets.
• 14 1/4” bits.
Designation
Drive
Ratchet
Extension
Extension
Universal joint
Screwdriver handle
Adapter with quick
change chuck
12 multi-use
sockets, 4 - 14 mm
Bit PH 1
Bit PH 2
Bit PH 3
Length
138 mm
100 mm
150 mm
33 mm
216 mm
Art. No.
Qty.
714.11151
713.118104
713.118106
713.118301
613.430311
30 mm
715.1101
Designation
Bit hex. socket size 3
Bit hex. socket size 4
Bit hex. socket size 5
Bit hex. socket size 6
TX 10
TX 15
TX 20
TX 25
TX 30
TX 40
Metal box
Foam insert
1
25 mm
1/4” Multi-Use Sockets
• Chrome plated; 1/4” square drive.
• Fits 5 different common head styles.
1/4” Adapter
• Square socket input drive for use with ratchet to square drive.
• 1/4” hex socket output drive, universal holder for 1/4” bits.
Note: This is a metric set. Standard sizes are only
Possible uses
Multi- 6/12
Outside
6 sided
Torx
4-sided
approximate equivalencies and may not work in all
applications!
L1
10
-
1/4” Universal Joint
• Chrome plated; ball groove; spring loaded joint.
1/4” Drive Screwdriver
• Round blade; ball groove.
D1
D2
t
Qty.
in mm in mm
bolt sz
head sz in TX
in mm in mm in mm in mm in mm Art. No.
4
-
5/32"
-
22
size 4
614.17693
614.17694
614.17695
614.17696
25 mm
614.3110
614.3115
614.3120
614.3125
614.3130
614.3140
225x125x35mm 955.7151
220x105x30mm 955.1132
1/4” Extension Bars
• Chrome plated; ball groove.
1/4” High-Performance Ratchet
• Chrome-plated with anti-slip 2-component handle.
• Head: fine toothed; 72 teeth; 5° rotating angle.
profile sided/12
Art. No.
E5
6.8
11.9
5
713.11304
5
size 5
-
-
-
size 4
22
8.1
11.9
5
713.11305
5.5
size 5.5
-
7/32"
-
size 4.5 22
8.7
11.9
5.5
713.113055
6
size 6
-
-
E8
size 5
22
9.3
11.9
6
713.11306
7
size 7
-
9/32"
-
-
22
10.8
11.9
6
713.11307
8
size 8
#10, #12 5/16"
E10
-
22
11.9
11.9
7
713.11308
9
size 9
-
-
22
13.4
13.4
7
713.11309
11/32"
10
size 10
1/4"
3/8"
E12
size 8
22
14.5
14.5
10
713.11310
11
size 11
1/4"
7/16"
E14
size 9
22
15.9
15.9
10
713.11311
12
size 12
-
15/32" E16
size 10 22
16.9
16.9
10
713.11312
13
size 13
5/16"
1/2"
-
-
22
18
18
11
713.11313
14
size 14
3/8"
9/16"
E18
-
22
19.6
19.6
11
713.11314
Qty.
614.175653
Bit slotted 0.8 x 5.5
713.11304713.11314
714.176274
614.176461
614.176648
22 mm
Drive Length
1
1
1/4" SOCKET WRENCH SET
Art. No. 965.01427
Multi-functional spherical ratchet
with adjustable handle and the most
commonly used socket wrenches in a
compact product range.
3 in 1!
Can be used like a conventional
ratchet, as a screwdriver or a
T-handle
Designation
Spherical Head Ratchet
9 Socket Wrench Inserts:
One each of 6; 7; 8; 9;
10; 11; 12; 13; 14
14 Socket Wrench Insert Bits: PH
1; PH 2; PH 3
Internal hex.: 4; 5; 6
TX: 10, 15, 20, 25, 27, 30, 40
Slotted: 1.0 x 5.5
Extensions
Cardan Joint
Foam Insert
Metal Box, size 1
Length in mm Art. No.
145
712. 01405
P. Qty.
0713 111 106
0713 111 114
22
0715 118 01
0715 118 03
25
0715 115 03–06
25
0715 113 10–40
25
0715 117 55
50; 150
0715 118 102–116
33
0713 118 301
215 x 105 x 30 0955 014 27
220 x 110 x 35 0955 715 1
25
1
Features
• Drive: 6.3 – 1/4"
• Standard: DIN 3122, ISO 3315
• Head: 72 teeth, angle of rotation: 5°,joint can be rotated
270°
• Handle: Two-component handle, straight or adjustable
90° as T-handle
• Contents: 27 pieces
Special Order
Can be used like a conventional ratchet
with quick ejector or safety lock
L1
L2
L3
145 130 77
Maintenance Set
B1
B2
D1
18.5 26.5 26
Can be used like a screwdriver
D2
20
Art. No.
712.01405
0712 000 014
Can be used with T-handle and swiveling ratchet
head. Any desired angle can be set. Locked in
place with rotary wheel.
P. Qty.
1
Special Order
11
Go-Through Metric Socket set
Art. No. 713.1300 - 14 pieces
•
•
•
•
Problem solver for narrow spaces, because of very low height.
With through-hole, ideal for long bolts and threaded rods.
With 2 adaptors (1/4" and 3/8") standard sockets can also be used.
Supplied in a metal box and a high-quality foam insert with clamping
effect.
Note: Articles in red are Special Orders only!
Designation
Ratchet
Extension
Adapter 1/4"
Adapter 3/8"
10 sockets,
10-19 mm
Foam insert
Metal box
Length in mm
205
76
26
30
32
220 x 105 x 30
225 x 125 x 35
Art. No.
713.13001
713.13002
713.13003
713.13004
713.13010 713.13019
955.1300
955.7151
P. Qty.
1
1
1
1
1
1
1
Ratchet
Head: 72 teeth, 5° rotating angle, round, compact head, one-hand
operation with reversing lever for clockwise and counter-clockwise
operation.
Model: chrome-plated, polished, very slim design.
Sockets
Bit: Hexagon, metric, powerdriv.
Model: chrome-plated, polished.
D1
D2
L1
D2
mm
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
Art. No.
713.13010
713.13011
713.13012
713.13013
713.13014
713.13015
713.13016
713.13017
713.13018
713.13019
Low height of the through-ratchet as compared to
the standard ratchet.
12
P. Qty.
D1
D1
mm
14.7
15.4
16.6
17.7
18.9
20.1
21.2
22.4
23.6
24.8
B1
B2
t
mm
7
7
7
8.5
9.5
11.5
12
12
12
12
L1
1
L1
mm
205
B1
mm
7
B2
mm
11.5
D1
mm
24.7
D2
mm
32.5
Art. No.
713.13001
P. Qty.
1
48 mm
L1
mm
32
32
32
32
32
32
32
32
32
32
33 mm
in mm
10
11
12
13
14
15
16
17
18
19
D2
t
Thanks to the through-hole, long bolts and
threaded rods can be processed.
Through-ratchet with adapter ejector enables an
easy removal of the socket spanner.
ratchet with switch lever
Rugged design with
convenient quick release
1
function
Coarse toothing with 48 teeth – 7.5°
rotating angle!
Easy direction change for right and
left direction.
2
Secure locking with quick release
to lock.
3
Features:
• Fast, simple reversing of clockwise and
counterclockwise rotation with lever.
• Low-lying, protected reversing lever for fast
left/right switching with one hand.
• Offset ratchet body allows more clearance for
gripping.
• Ergonomical design of the handle.
• Quick release for fast socket change and ball
locking device.
Secure locking with quick release
to unlock.
4
Low lying and protected reversing
lever.
Description
Ratchet with switch lever
Size
1/4"
3/8"
1/2"
Art. No.
712.01401
712.03801
712.01201
13
1/4“ Ratchet & Screwdriver Set
Art. No. 008.01404
4-piece set for all your 1/4"
applications.
1/4" Ratchet with Lever
• Coarse toothing with 48 teeth – 7.5° rotating
angle!
• Fast, simple reversing of clockwise and
counterclockwise rotation with lever.
• Low-lying, protected reversing lever for fast
left/right switching with one hand.
• Offset ratchet body allows more clearance for
gripping.
• Ergonomical design of the handle.
• Quick release for fast socket change and ball
locking device.
1/4" Drive Screwdriver:
• Egonomically shaped handle
• Grip: 2-component handle
• Input drives: 1/4", ball groove
• Output drive: 1/4"
Kit includes
Description
Ratchet
Screwdriver
Extension
Socket
14
Size
1/4"
M13
Art. No.
712.01401
613.430310
713.118100
713.111113
1/2“ hammer ratchet
Art. No. 712.01205
Saves time and money with 2
tools in one!
Features:
• Fast, simple switchover.
• Low-lying, protected reversing lever and offset
ratchet body for more clearance for gripping.
• 1/2" drive (12.5 mm)
• 48 teeth
• Meets the DIN 3122 and IOS 3315
standards
Applications:
• High-bay shelfing construction, commercial
vehicles and maintenance, scaffolding
construction, road construction, etc. Especially
for aligning work pieces.
The particular innovation of this tool is its
combination of ratchet and hammer. With its
high-quality workmanship, it has an extremely
versatile and sturdy appeal.
15
Ratchet Adapter Assortment
Article #: 965.1280 - Qty. 1
Contents: 8 pieces
Combined adapter assortment with
most common socket-wrench and bit
adapters.
Finish: chrome plated
Drive: Square (see table for list of sizes)
Socket adapters
Ratchet Drive
3/4"
1/2"
1/2"
3/8"
1/4"
3/8"
Bit adapters
1/4"
3/8"
16
Socket Drive
1/2"
3/4"
3/8"
1/2"
3/8"
1/4"
1/4"
5/16"
Qty.
Hard Foam insert
Article #: 955.1280
Metal box 220 x 110 x 35 mm
Article #: 955.7151
Note: Items in red are special orders only
1
1
1/2" Drive Torx/XZN/Allen Socket Assortment
Complete 1/2" assortment with short
and long Allen, inner TX and multipoint
XZN sockets.
Contents especially matched to
automotive and cargo applications.
Art. No. 965.13310 - Qty. 1
Hard foam with clamping effect
Art. No. 955.13310
Metal box 350 x 260 x 55 mm
(13-3/4" x 10-1/4" x 2-3/16")
Art. No. 955.7154
Contents: 31 pieces
8 TX socket wrenches, short version
TX 25, 27, 30, 40, 45, 50, 55, 60
4 TX socket wrenches, long version
TX 30, 40, 50, 60
4 XZN multipoint socket wrenches, short version
M 5, 6, 8, 10
3 XZN multipoint socket wrenches, long version
M 8, 10, 12
8 Allen socket wrenches, short version
5, 6, 7, 8, 10, 12, 14, 17 mm
4 Allen socket wrenches, long version
6, 8, 10, 12 mm
17
Double-Ring Ratchet
Spanner Set
Art. No. 714.23100 - 32 pieces
Special tool assortment for use in tight spaces.
Note: Articles in red are Special Orders
only!
Designation
Double-ring ratchet 1/4"
and 10 mm drives
Double-ring ratchet, 1/4"
and 10 mm drives
Bit
Adapter 10 mm x 1/4"
Foam insert 215 x 105 x 30 mm
Metal box 22 x 110 x 35 mm
1/4" Drive bits:
TX 15
TX 20
TX 25
TX 27
Slot 5.5 mm
Slot 8.0 mm
Allen head, size 4 mm
Allen head, size 5 mm
Allen head, size 6 mm
PH 1
PH 2
PH 3
Can be used with bits and
sockets.
• Double-function special ratchet
with 1/4” and 10 mm mount.
18
Length in
mm
Art. No.
200
714.23101
110
714.23102
22
715.1102
P.
Qty.
955.23100
955.7151
25
614.3115
1
614.3120
614.3125
614.3127
614.175653
617.175656
614.17694
614.17695
614.17696
614.176274
614.176461
614.17648
Special low ratchet height.
• In comparison to conventional
1/4” ratchets.
Designation
10 mm Drive bits:
TX 30
TX 40
TX 45
XZN M 5
XZN M 6
XNZ M 8
Allen head, size 7 mm
Allen head, size 8 mm
1/4" sockets, hexagon:
Size 6 mm
Size 7 mm
Size 8 mm
Size 9 mm
Size 10 mm
Size 11 mm
Size 12 mm
Size 13 mm
Size 14 mm
Bit
Special offset ratchet spanner with
optimum working length of 110 mm
or 200 mm.
• Especially suitable for tight
working areas, e.g. door hinges,
engine compartments and
toothed belt covers.
Length in
mm
Art. No.
30
22
614.788830
614.788840
614.788845
614.788405
614.788406
614.788408
614.788307
614.788308
P.
Qty.
1
713.111106
713.111107
713.111108
713.111109
713.111110
713.111111
713.111112
713.111113
713.111114
Fine-toothed ratchet enables
screwing in and out in the smallest
of spaces.
• Clockwise and counter-clockwise
rotation can be switched with
one hand.
Flexible ratchet ring wrenches
Flexible ratchet head, metric version
Power take-off: ring end POWERDRIV®
bihexagonal, fine pitch, 72 teeth
Material: Chrome-Vanadium steel
Surface finish: bright polished, chrome-plated
Geometry: open end offset 15°, ring end 180°
joint, sturdy heads for heavy duty use
Application: loosen screws with open end,
unscrew with ratchet mechanism of ring end
Attention: This is a special tool that may not be
subjected to loads in excess of maximum torque
values. For that reason, the tool is of limited
suitability for loosening of tight screws.
Note: Articles in red are Special Orders only!
* Available in the set, Art. No. 714.25350
mm
8
10
11
12
13
14
15
16
17
18
19
L
mm
140
159
165
172
178
191
200
208
226
237
248
a1
mm
4.9
5.6
6.0
6.1
6.7
7.1
7.4
7.7
8.1
8.5
9.1
a2
mm
6.5
7.3
7.7
8.2
8.6
9.0
9.4
9.9
10.3
10.7
11.2
ød
mm
15.9
19.1
20.6
21.7
23.6
25.9
27.2
28.7
30.5
31.5
39.7
b1
mm
16.7
20.9
23.0
25.1
27.7
29.3
31.3
33.4
35.5
37.6
39.7
F Max
Nm ft-lb
35
25
59
43
74
54
91
67
109 80
131 96
153 112
179 132
205 151
235 173
266 196
Art. No.
714.25308*
714.25310*
714.25311
714.25312*
714.25313*
714.25314
714.25315
714.25316
714.25317*
714.25318
714.25319*
P. Qty.
The 180° articulated joint of the ring wrench
allows easy and flexible access to work, even in
tight areas.
1
POWERDRIV®
set of flexible ratchet ring wrenches
Without POWERDRIV® = linear pressure
Set
6 pcs.
mm
8, 10, 12, 13, 17, 19
Art. No.
714.25350
P. Qty.
1
With POWERDRIV® = surface pressure
19
RATCHET COMBINATION Wrench
Innovative wrench with
ratchet function on the ring
and open sides.
• Drive: Ring-side POWERDRIV® modified12point, open side with open ratchet segment.
• Standard: max. torque as per DIN 899.
• Material: Chrome-vanadium-steel.
• Surface: polished, chrome-plated.
• Geometry: straight on ring side, 15° angle
on open side. To change the turning direction,
simply turn the wrench around.
Areas of use:
Designed for union screw joints, e.g. brake lines,
injection lines, air conditioning, hydraulics etc.
Dia. in
mm
8
9
10
11
12
13
14
15
16
17
18
19
L in mm a1 mm
a2 mm
140
149
158
165
171
178
190
199
208
225
236
247
6.5
6.9
7.3
7.7
8.2
8.6
9.0
9.4
9.9
10.3
10.7
11.2
4.1
4.3
4.8
5.1
5.3
5.9
6.3
6.6
6.9
7.3
7.8
8.3
dia. d
in mm
16.8
18.8
20.8
21.8
22.8
24.8
27.8
28.8
30.8
31.8
32.8
33.8
b1 mm
Art. No.
P. Qty
16.7
18.7
20.8
23.5
24.6
26.8
29.0
31.0
33.0
35.5
37.5
39.4
0714 259 08*
0714 259 09*
0714 259 10*
0714 259 11*
0714 259 12*
0714 259 13*
714.25914**
0714 259 15*
0714 259 16*
0714 259 17*
0714 259 18*
0714 259 19*
1
1
1
1
1
1
1
1
1
1
1
1
Ratchet Combination Set
*Special order only ** In stock
Use:
• Open side features moving ratchet segment
Enables working without stopping, as the wrench no
longer needs to be taken off the nut. Ideal for all line
screw joints.
20
• Fine-toothed on ring side, 72 teeth, 5°
rotating angle.
Very rugged and strong ratchet for high
tightening torques.
Set
Dia. in mm
Art. No
6
8,10,12,13,17,
19 in plastic
714.25950
holder
P.
Qty
1
Metric Double Ring Ratchet Wrench Set
Innovative double-sided, double-ended
ratcheting wrench.
Drive: double-ring side POWERDRIV®
bi-hex, fine-toothed, 72 teeth, one-hand
operation via reversing lever for clockwise and
counterclockwise use.
Material: chrome-vanadium steel.
Surface: chrome-plated, high gloss polished.
Geometry: ring side straight.
•
•
•
Set (comes in a clear plastic blister pack)
Art. No.
8x10+12x13, 16x17+18x19
3 pcs.
714.25730
Bit adapter: 10 mm x 1/4", 20 mm long
Set Contents: (available separately through Special Orders)
L in
a1 in a2 in
mm mm mm
in mm
8x10 +12x13 160 8
12
16x17+18x19 230 11
18
Bit adapter: 10 mm x 1/4", 20mm long
CE - VS - PHG - 250 - 06/10 - Copyright 2010 by Würth
ht
Eig
s
size
4
2x
b1 in
mm
9
11
b2 in
mm
15
20
d1 in
mm
21
33
d2 in
mm Art. No.
26
714.257013
35
714.257019
715.1103
Size 12
Size 8
Size 13
Size 10
P. Qty.
1
Four sizes per ratchet wrench.
The most common sizes are covered by only
two ratchet wrenches.
1/4" bit adapter available.
Simply insert in size10 mm ratchet wrench;
can then be used as a bit ratchet.
Narrow ratchet head.
For hard-to-reach areas.
5° angle of rotation for
working in the tightest of
spaces. Precision-machined
ring core for smooth and
secure use.
P. Qty.
1
1
1
Size 19
Size 17
Size 18
Size 16
36 mm
21
Stubby Gearless Ratchets
Drive
1/4”
3/8”
L1
mm
77
106
L2
mm
93
67
B1
mm
9
11
• Short handle with reversible square drive.
• Head: overrun, turning angle less than 3°.
• For tight spaces, e.g. engine compartments,
motorcycles, tool making, fine mechanics,
kitchen construction, adjustment work.
• Chrome-molybdenum steel.
B2
mm
16
23
D1
mm
21
27
D2
mm
14
16
Fmax
Nm
43
162
T-Handle Ratchet Screwdriver
Art. No.
713.110111
713.120111
Qty.
1
With 10-piece bit strip + PH 2 bit.
• Handle: 2 component handle.
• Blade: Long bit holder blade with magnet,
bright chrome-plated.
• Tip: 1/4" hex (DIN 3126-D 6.3)
Use of the T-handle with high loosening
torque or high tightening forces.
• Rugged ratchet function with 45 teeth.
Max. torque up to 40 Nm (29.5 lb-ft).
• 3-position adjustment wheel. Can be
adjusted with one hand.
Simple change of direction during work
possible without using the other hand.
Bits included (1 each):
1/4"
5.5
4 mm, 5 mm
in inches A1
95 mm
1/4"
3-3/4"
22
B
85 mm
3-11/32"
C
100 mm
3-15/16"
A2
10 mm
25/64"
Article #
P. Qty.
613.63040
1
PH 1, PH 2
TX 10, TX 15, TX 20, TX 25,
TX 30
T-Handle Assortment
4 in 1
T-handle screwdriver
+ High-performance ratchet
screwdriver
+ Reversible or adapter bits
+ Socket-wrench inserts
Reversible bit assortment:
Select an appropriate bit insert it in the handle - you're
done!
Art. No. 613.630400 - Qty. 1
Broad range of tools for any application.
• Ratchet function.
Very rugged design, max. torque up to 40
Nm (29.5 lb-ft).
Contents, 21 pieces:
Length
Tip
Designation
T-Handle Ratchet
screwdriver
• Flexible bit-holder blade.
Especially suitable for working in inaccessible
areas.
Size
Art. No.
85 mm
613.63040
11 socket-wrench
inserts, hexagon
1 each 5; 5.5; 6;
7; 8; 9; 10; 11;
12; 13; 14 mm
22 mm
713.111105
to
713.111114
Adapter blade
150 mm
613.711
Magnetic bit holder
150 mm
613.712
P. Qty.
1
Foam insert
275 x 160 x 40
955.630400
Foam insert
275 x 160 x 40
955.12371
Designation Tip
Flexible bit
holder
Blade PH 1 PH 2
Blade TX10 TX15
Blade TX20 TX 25
Blade TX30 TX 40
Blade Allen
head 4 - 5
Blade PZ2 Slot 6 mm
• 2-component T-handle
Ergonomically adapted handle. It lies
comfortable in the hand and ensures
fatigue-free working.
• High-performance ratchet screwdriver.
No more regripping required. And that
enables fast, efficient operation in any
assembly situation.
• Large numbers of different reversible
blades, adapter, bit-holders and socketwrench inserts.
Contains the right tool for any application,
and also includes a flexible bit holder.
• High-quality reversible blades.
High top strength thanks to special treatment.
With Würth colour coding systems for fast
locating.
Black-point tip for highly precise fit.
All reversible, adapter and bit-holder
blades have a 1/4" / 6.3 mm hex mount.
Length
Size
Art. No.
P. Qty.
613.713
613.8091
613.8092
175 mm
613.8093
1
613.8094
613.8095
613.8096
Items in red are special order only!!!
23
revolver led screwdriver
Complete screwdriver assortment with the most
common bits, a broad range of adapters and
socket wrench inserts.
Art. No. 613.64037 - 37 piece
ZEBRA®2-component gun grip for ergonomicallyoptimized working conditions.
• Can be used as a “standard screwdriver” in the straight
position or in the 60° gun position thanks to the adjustable
grip.
• The grip is secure and comfortable to hold in the gun
position and is optimally positioned to the screw.
LED technology.
• The working area is always well lit. Light falls directly onto
screw connection.
• Especially suitable for dark areas.
High-performance ratchet screwdriver.
• No more regripping required. And that enables
fast,efficient operation in any assembly situation.
• 45 teeth, max. torque of40 Nm.
Sealing cap with bit magazine for a total of six
bits.
• Storage space in handle, 1/4“bits with Würth colorcoding
system for fast location of bits.
Large number of different adapters, bit
holdersand socket wrench inserts.
• Contains the right short or long version for any application,
also with telescopic magnet.
Contents
Designation
Tip
Gun Screwdriver, LED light
with short, magnetic bit
holder, 70 mm
Length (size) in mm
Art. No.
P. Qty
164
0613 640 0
-
270 x 155 x 35
0955 640 37
Metal Box
-
280 x 165 x 45
0955 12 371
1/4" socket wrench inserts, hexagon
Size 4 mm
0713 111 104
Size 5 mm
0713 111 105
Size 5.5 mm
0713 111 155
Size 6 mm
0713 111 106
Size 7 mm
0713 111 107
Size 8 mm
0713 111 108
22
0713 111 109
Size 10 mm
0713 111 110
Size 11 mm
0713 111 111
Size 12 mm
0713 111 112
Size 13 mm
0713 111 113
Size 14 mm
0713 111 114
1/4" bits
0614 176 274
PH 1
PH 2
PH 3
24
Tip
Length (size) in mm
Art. No.
P. Qty
1/4" Bits
Foam Insert
Size 9 mm
Designation
25
0614 176 461
0614 176 648
PZ 1
0614 176 651
PZ 2
0614 176 652
Slotted 0.8x5.5mm
0614 175 653
Slotted 1.2x8.0mm
0614 175 656
TX 10
0614 311 0
TX 15
0614 311 5
0614 312 0
TX 20
25
TX 25
1
0614 312 5
TX 27
0614 312 7
TX 30
0614 313 0
TX 40
0614 314 0
Allen Head, 3 mm
0614 176 93
Allen Head, 4 mm
0614 176 94
Allen Head, 5 mm
0614 176 95
Allen Head, 6 mm
0614 176 96
1/4" - adapter parts
Extension
70 mm
0613 710
Extension
150 mm
0613 711
Magnetic bit holder
150 mm
0613 712
Flexible bit holder
Telesc. magn. holding
force 600 g
175 mm
0613 713
105 - 485 mm
0613 714
-
1
Zebra 3-K Screwdriver Set, 5 pieces
in mm
1.0 x 5.5
1.2 x 7.0
1.6 x 9.0
A
in mm
100
125
150
B/C
in mm
96/31
106/35
114/38
in mm
6/10
6/10
8/13
in inches
7/32 x 4"
9/32 x 5"
11/32 x 6"
PH1
PH2
A
in mm
80
100
B/C
in mm
96/31
106/35
in mm
5/8
6/10
in inches
3-1/8"
4"
The flexible 3-component handle
ensures perfect ergonomics,
power transmission and working
comfort.
Art. No. 613.9015 - Qty. 1
Art. No.
Qty.
613.200055
613.20007 1
613.20009
613.2011
613.2012
1
Blade: One-piece hexagon blade, matt
chrome-plated; wrench aid matt nickel-plated,
hardened impact-resistant.
Large impact cap.
Flat Screwdriver:
Tip: DIN 5264-A, ISO 2380 with "black
point" tip.
Phillips Screwdriver:
Tip: DIN 5260-PH, ISO8764-PH with "black
point" tip.
Würth colour coding system on wrench aid.
Articles in red are Special Orders only!
25
zebra robertson screwdriver set (square bit)
Art. No. 613.43910
Features:
• Square (Robertson Bit)
• 2 component Handle for
comfort
• Colour coded tips
Set of 4 Screwdrivers
Size
SQ#0
SQ#1
SQ#2
SQ#3
Blade
6mm x 100mm
Precision Screwdriver set
Art. No. 613.4892
7 piece set
mm
0.30 x 1.5 x 40
0.4 x 2.0 x 60
0.4 x 2.5 x 75
0.5 x 3.0 x 75
Special Order Only
26
Art. No.
0613 480 015
0613 480 020
0613 480 025
0613 480 030
PH 00
PH 0
PH 1
Art. No.
0613 481 00
0613 481 0
0613 481 1
Qty.
1
1
1
Ratchet SCrewdriver with Bit MAgazine
in inches A
80 mm
1/4"
3-9/34"
B1/B2
147 mm / 207 mm
5-25/32" / 8-9/64"
Easy change ratchet mechanism.
C
37.5 mm
1-15/32"
Grip: 2-component handle
Blade: Round blade with magnet
Ratchet mechanism: 28 teeth
Tip: 1/4" hex (DIN 3126-D 6.3)
Art. No.
P. Qty.
613.6100
1
• Powerful ratchet screwdriver.
28 teeth, max. torque over 20 Nm
(14.75 lb-ft).
• Powerful, fast screwing.
One-handed screwing, simple change of
direction while working possible without
using other hand.
• Advantage of ratchet function.
No more regripping required. And that
enables fast, efficient operation in any
assembly siruation.
• 2-component handle.
Extremely thin ratchet screwdriver for
optimum force transfer and pleasant
handling.
• Bit magazine for max. 12 bits.
Pull-out, rotating magazine for fast
location of desired bit.
(Bits are not included).
• Snap lock.
Audible 'click' confirms reliable locking of
bit magazine.
Magnetic blade holder for 1/4" bits.
Hundreds of uses in industrial applications!
Hex Nut
Driver
l
stee
Stainless
Strong
Magnetic
Pickup
Powerful ratcheting
screwdriver.
3 position selector ring,
28 teeth, max. torque over
20 Nm (min.225 inch lbs.)
2-component handle.
Extremely thin ratchet
screwdriver for optimum
force. Ergonomic design for
optimum comfort.
Snap lock.
Audible "click"
confirms reliable
locking of bit
magazine.
Pull-out, rotating
magazine.
For fast selection of
desired bit. Bit magazine
for max. 12 bits.
(Bits are not included).
27
Screwdriver with Flexible Shaft
For hex head screws.
• Shaft: round, flexible.
• Drive: for hex head screws.
• Head: bright nickel-plated, interior bore for
protruding threads.
• Standard: DIN 3125.
• Application: in tight spaces, hose clamps.
• Suitable for all Prefix 539 clamps.
mm
6
7
A mm
150
150
B/C mm
96/31
106/35
A inch
6"
6"
Art. No.
613.28606
613.28607
Qty.
1
* Formerly Art. No. 613.007
Bit Set with Holder
Art. No. 614.206 - with 16 bits
• Contains 16 popular bits with AW, slotted, Robertson, Phillips and Pozi Drive styles
• 25 mm (1”) bit length
• Also includes a 1/4” magnetic universal extension, 74 mm long (3”)
• 5 empty slots allow you to add extra bits (Prefix 614)
• Belt clip keeps set secure, and within easy reach on the job
Drive Style
28
Size
AW 10
AW 20
AW 25
0.6 x 4.5
1.0 x 6.0
1.2 x 8.0
Qty.
1
1
1
1
1
1
R2
2
PH 1
PH 2
PH 3
PZ 1
PZ 2
PZ 3
1/4” E6.3, 74 mm long,
stainless steel sleeve
1
2
1
1
2
1
1
Security Torx Bit Assortment
Art. No. 614.250352
6 Drive Sizes Included (TX 10, 15, 20, 25, 30,
40); with inside hole.
Security Torx Screws are used in
applications to prevent unauthorized
tampering.
Applications:
Air bags, ABS brakes, ignition systems, etc.,
protective barriers, guide rails, plexiglass panes,
bus stops, park benches, school furniture,
school bus repair and manufacturers, etc.,
distributor boxes, switch boards, charging units,
air conditioning units, domestic appliances,
telephones, etc.
Universal Bit Set
Art. No. 614.250500
•
•
•
•
90 pieces.
1/4” drive.
Magnetic.
Includes all standard drive styles and safety
screws.
• Includes 1/4” drive magnetic ratchet adapter.
• In sturdy metal box.
• Comes in foam insert to keep the bits nicely
organized.
29
Angled Combi Pliers
Art. No. 714.01591
A multi-funtional plier that
allows many applications in
countless fields!
Features:
• Ergonomic and relaxed position of the hand.
• 2K handle for a better comfort.
• Convenient use when pulling objects.
• Grooves to get a grip of objects, e.g. nails
• Securing workpieces
• Gripping pipes
• Form-fit clamping of screw-driving parts
• Cutting cables and wires
• Length: 200 mm
Soft Wire : 5.9 mm
Hard Wire : 2.5 mm
Aluminum and Copper cables
:13 mm
Angled flat round pliers
Art. No. 714.01592
A nose tip plier for those hard
to reach areas!
Features:
• Ergonomic and relaxed position of the hand.
• 2K handle for a better comfort.
• Convenient use when pulling objects.
• Cutting cables and wires
• Insulating conductors
• Gripping, securing and bending
• Crimping wire-end sleeves (low voltage)
• Length: 210 mm
Soft Wire : 5.9 mm
Hard Wire : 2.5 mm
Aluminum and Copper cables
30
: 13 mm
Waterpump Pliers
L
inch
10
12
L
mm
250
300
• Crafted from Chrome-Vanadium steel,
hardened.
• Plastic coated anti-slip handle.
• Induction hardened teeth.
• Black laquered, ground head.
• Grooved, 7 adjustments on joint.
• Self-clamping on pipes and nuts.
• No slippage on workpiece.
D
inch
1
1-1/2
D
mm
30
40
E
mm
32
40
Tower Pincers
B
mm
16
19
C
mm
7
10
Art. No.
714.0276
714.0277
Qty.
1
DIN 5242
• Head polished, matte black finished handles.
• Twist and cut wire in one operation.
• The short head and the long, slim shanks
make it possible to turn the pliers easily and
quickly when twisting.
• Pull out nails, clips, etc.
• Can be used to mount Prefix 541 clamps.
Length
mm
200
220
250
280
inches
5
8 1/2
10
11
Weight in g
230
335
390
450
Art. No.
715.0204
715.0205
715.0206
715.0207
Qty.
1
31
Vice-Grip Pliers
Vice-grip pliers with
universal jaws.
Features:
• Smooth-action release lever with spring
mechanism.
One-hand operation - pulling instead of
pressing.
• Lock nut for locking clamping width.
Constant adjustment for repetitive work steps.
• Ergonomic, attractive design.
Convenient, effortless use.
• High-quality epoxy coating.
Welding spatters hardly adhere.
Less rusting than with nickel.
10 times better rust resistance than a nickel
coating. More friendly to the environment.
The combination of straight, semi-circular and convex jaw shape results in a broad range of clamping
applications.
Total length
200 mm
235 mm
300 mm
32
Clamping jaw width
0 mm - 40 mm
0 mm - 60 mm
0 mm - 60 mm
Article #
713.0925
713.0926
713.0927
Qty.
1
Cutting knife
Art. No. 715.6621 - 18 mm
Features
• Handle of impact-resistant plastic and metal
blade guide.
High stability and precise blade guidance.
• Automatic blade locking up to pressure load
of 20 kg.
Convenient one-hand operation.
• Blade magazine for 2 spare blades.
• Delivery scope incl. 3 x 18 mm break-off
blades.
Replacement Blade
Art. No. 715.6605 - 18mm
2 extra blades included in magazine.
Safety Knife
With bi-metal blade
• Automatic blade retraction via retracting spring.
Minimizes risk of injury.
• Blade changed in seconds without tools thanks to magnetic retainer.
No need to search for suitable tools.
• Ergonomic, non-slip two component handle.
Fits well and securely in your hand.
• Integrated blade magazine for five blades.
Optimum storage of spare blades.
• Includes one bi-metal trapezoidal blade.
Total Length (mm)
170
Exacta Knife
Art. No.
715.66013
P. Qty.
1
Replacement Blades
Art. No. 695.106
•
•
•
•
Handle: impact-resistant plastic.
Catch: via wheel.
1 break-off blade, 18 mm, included.
8 point breakaway.
Designation
Knife
Replacement Blades - 18 mm
Art. No.
715.6604
715.6605
P. Qty.
5
10
33
ANGLED GEAR
Art. No. 614.9000
Powerful angled screwing gear
for screwing and drilling work.
Suitable for use with electric
drills and battery-operated
driver drills.
•
•
•
•
High quality angled gear.
Specially hardened steel enables maximum
torque of up to 57 Nm (42 ft-lb) or maximum
speed of 2000 rpm.
Handle with soft grip.
Secure hold and 360° steplessly adjustable
handle. Optimum adjustment to respective
work application.
Compact design.
Excellent for screwing in cramped and hard-toreach places.
Magnetic 1/4" bit mount with quick-change
chuck.
Secure holding of screws with magnetic effect.
Suitable for all standard bits and bit drills with
C6.3 and E6.3 mount.
• Mount: 1/4" hexagon (E6.3).
• Dimensions: 165 x 32 x 50 mm (L x W x H)
(6.5" x 1.25" x 2")
3
4
1
2
Fast, simple 360° adjustment of handle for high flexibility.
Mini ChUCK
Art. No. 713.9204 - P. Qty. 1
• 1/4" hex shaft for use with Angled Gear, Art. No. 614.9000
• Drill size range: 0.4 mm - 6 mm (1/64" - 5/64")
• Suitable for both left and right-hand rotation
34
Modular tool trolley
Art. No. 715.93700
Composed of three
compartments
Features:
• Upper hand tool box with 2 latch locks
• 2 drawers with steel ball bearings
• Storage truck with Würth logo on the
lower compartment
• All compartments are modular
• Made of polypropylene and steel
• Wheels made from plastic and rubber
• Long telescope handle
• Compartments can be locked separately
from eachother
Dimensions:
20.47 x 12.60 x 28.35 in
52 x 32 x 72 cm
WORKSHOP-TROLLEY S5
Art. No. 962.613500 - Qty. 1
• Full measurement including handle h 905mm x w 695mm
x d 412mm
• Stable welded construction
• Body powder coated
• Central locking
• 2-wheel steering: Ø100 (1 with brake), 2 fixed wheels Ø100
• Aluminum handle
• Aluminum drawers
• 5 drawers
• Drawer Interior Dimensions (w x d): 468 x 323 mm
• Load capacity per drawer 30 kg with evenly distributed weight
• Drawers on ball bearing rails, advancing 100%
• Upper tray with plastic protection
Dimensions
Drawer Measurement
wxdxh
2 small drawers
469mm x 337mm x 65mm
2 medium drawers 469mm x 337mm x 140mm
1 large drawer
469mm x 337mm x 220mm
Item
35
Warranty on Würth Hand Tools
Limited Warranty
Terms of and Conditions of Sale
Würth warrants any of its manufactured Products for the expected life of
the Product against deficiency in material or workmanship.
This warranty is subject to the disclaimers and limitations on liability
described below.
Customer agrees and represents that he is buying the Product for his own
use and not for resale. Customer's placement of an order for a Product
constitutes Customer's unconditional acceptance of the following terms
and conditions. These terms and conditions are subject to change without
prior written notice at any time and in Würth's sole discretion.
Würth does NOT provide any warranty for Products subjected to
"abnormal use". "Abnormal use" includes misuse, accident, modification,
alteration, abuse, neglect, lack of maintenance, repair by others or use
after the Product is significantly worn. Products not manufactured by Würth
are not warranted by Würth.
During the applicable duration of the warranty, at its option, Würth will
repair or replace its Products which fail to give satisfactory service due to
defective workmanship or materials, or provide a refund by repaying or
crediting Customer’s account with an amount equal to the purchase price
of such Products.
There is no warranty that extends beyond those described herein. Würth
makes no representations of any other kind, express or implied, regarding
Products manufactured or distributed, of merchantability, fitness for a
particular purpose, or any other matter. Würth is not liable for incidental
or consequential costs or losses incurred by the Product purchaser or user.
Würth reserves the right to make changes in design, appearance and
construction of any and all Products listed herein without incurring
any obligation in making such changes in Products previously sold or
transferred, or to replace any previously sold or transferred Product with
the updated Product. Würth also reserves the right to discontinue the
availability of any Products at any time, at Würth’s sole discretion.
"Würth" means all companies forming part of the Würth Group, including
Wurth Canada Limited/Limitée.
"Product" means any Würth or Zebra brand hand tool purchased directly
from Würth.
We have been present in Deutsche Tourenwagen Meisterschaft (DTM, German Touring Car
Championships) for many years. The DTM fan community is fascinated by racing cars with more
than 500 hp, and the great sport lived by the DTM drivers. In the race car pits of our partner
Audi, mainly Würth tools are used. Many of the assembly elements and car care agents come
from us as well. The Würth logo is proudly displayed on the C-pillar of the Audi DTM cars.