wattstopper
High Bay Wet Location Occupancy Sensor Module
Models
HB350W 120/277 VAC, 60 Hz
Load @ 120 VAC 0-800 W Ballast/
Tungsten, 1/6 Hp
Load @ 277 VAC 0-1200 W Ballast
HB340W 347/480 VAC, 60 Hz
Load @ 347 VAC 5 A Ballast
Load @480 VAC 5 A Ballast
HB330W 208/240 VAC, 60 Hz
Load @240 VAC 5 A Ballast
HB300W 24VDC
Use with Wattstopper power pack
Specifications and Features
For use in wet location environments
(indoors and outdoors)
Easy mounting using extender module
mounting accessory
Product Overview
HB3x0W PIR occupancy sensors are
designed for automatic lighting control
in warehouses and other wet location
medium and high bay applications.
The HB3x0W sensors are modular and
consist of two parts, a sensor module
(HB3x0W) and a lens (HBLxW). The
HB3x0W sensor module is a one-piece
self-contained unit with a 1/2” threaded nipple for attaching to wet location
junction boxes and conduit hubs, and to
the end of a fixture. Three lens choices are offered, and lenses are interchangeable. Sensitivity and time delay
adjustments are set using DIP switches located behind the lens.
Line voltage and low voltage
occupancy sensors
Power consumption for line voltage
models:
HB330W, HB340W: 0.34W
HB350W: 0.36W
Power consumption for low voltage
model:
HB300W: 10mA @ 24VDC
Operating Temperature: -40°F to
158°F (-40°C to 70°C)
Weight: 8 oz (226.8 g)
HB3x0W (sensor module)
Maximum Dew Point: 85°F (29°C)
1/2” Threaded nipple
Five year warranty
SO cable with 18AWG
stranded conductors
UL and cUL listed
IP65 rated
DIP switches
PIR
dectector
HBLxW (lens module)
UL rated raintight (UL244A and
UL508)
Optical
Three interchangeable lenses
(HBL2W, HBL3W, HBL4W)
Lenses sealed and gasketed
Gasket
Lens choices for mounting
between 8 and 40 feet (lens required
for operation)
Materials
Threaded
tightening ring
Polycarbonate, flame retardant
UV resistant
Impact resistant
Recyclable
Meets materials restrictions of RoHS
Factory Defaults
Time Delay:
15 minutes
Sensitivity Mode: Normal
www.LEGRAND.us/WATTSTOPPER
20'
10'
0'
wattstopper
60 ft
Coverage
10'
30'
20'
20'
10'
10'
20'
0'
10'
20'
0'
60 ft
10'
0'
20'
8'
24'
11' 7' 3' 0' 3' 7' 11'
24'
20'
10'
0'
10'
20'
HBL2W top coverage pattern
HBL2W side coverage pattern
HBL2W Low Bay Lens
0'
20'
8'
Ceiling
24'
0'
11' 7' 3' 0' 3' 7' 11'
24'
10'
5'
0'
40 ft
10'
10'
15'
20'
20'
18'
15'
12' 9'
6'
3'
0'
3'
6'
9'
12'
15'
20'
20'
18' 20'
HBL3W side coverage pattern
0'
10'
20'
HBL3W Mid Bay Lens
HBL3W top coverage pattern
30'
27'
Coverage Side View
0'
10'
.83
20'
R1
12'
10'
6'
3'
0'
3'
6'
20'
60 ft
+
12'
30'
20'
40'
30'
20'
12'
6'
0'
6'
12'
20'
27'
30'
30' 27'
30'
HBL4W side coverage pattern
20'
12'
6' 3' 0' 3' 6'
12'
20' 27' 30'
HBL4W top coverage pattern
HBL4W High Bay Lens
2.21”
(56.13mm)
Dimensions
.39”
(9.90mm)
2.21”
(56.13mm)
.39”
(9.90mm)
7.45”
(189.23mm)
4.09”
(103.88mm)
7.45”
(189.23mm)
4.09”
(103.88mm)
3.17”
(80.51mm)
3.17”
(80.51mm)
HB3x0W dimensions (top view)
.66”
.43”
(16.76mm)
(10.92mm)
3.66”
(92.96mm)
HBL2W and HBL3W dimensions
1.61”
(40.89mm)
0.78”
0.45” (19.81mm)
(11.43mm)
1.61”
(40.89mm)
3.66”
.33”
(8.38mm)
.33”
(8.38mm)
HB3x0W sensor module dimensions
(92.96mm)
HBL4W dimensions
www.LEGRAND.us/WATTSTOPPER
wattstopper
Installing and Mounting Instructions
The 1/2" chase nipple facilitates mounting through fixture
knockouts, or attaching to threaded J-boxes or conduit
hubs. An accessory bag with an O-ring and two locknuts is
available to accommodate various mounting needs.
Mount the sensor so that the fixture does not obstruct
the field of view.
"O" Ring
Direct mounting to wet location J-box.
HB3x0W
IP65 Occupancy sensor
with HBLxW lens
Wiring connection
made inside box
Direct mounting to wet location J-box
using conduit hub.
Conduit hub
1/2” O Stamped locknuts
securing nipple
120.90mm
to housing
145.54mm
HBEM3W
Extender
Module
Mounting using an HBEM3W extender
module accessory to attach sensor
to fixture.
HB3x0W
IP65 Occupancy sensor
with HBLxW lens
Wiring Diagrams
120/277VAC Wiring (HB350W)
Important Start-up Information
Neutral
White
Line (Hot)
Load
Black
HB350W
Red
HB350W
Black
Red (Load A)
White
Red with White
Stripes (Load B)
(347 VAC Neutral)
(347 VAC Cap Off)
Phase A
Phase B
HB340W
HB340W
www.LEGRAND.us/WATTSTOPPER
Load
1. When power is initially applied to the sensor,
the relay will be in a closed position to enable
the lights to turn on immediately. Consequently, the sensor requires one minute to warm up
before becoming operational. This warm up
period is necessary either upon initial power
up, or upon power up after a temporary power
loss to the circuit.
2. The sensor is shipped with a factory preset
time delay of 15 minutes. Lights will turn off
15 minutes after the last motion is detected.
wattstopper
Wiring Diagrams
HB330W
HB300W Wiring
Power
Pack
Load
Phase A Load
Phase B
Phase B Load
White
Black
Red
Red w/white stripes
Black
Red
Black
Hot
Red
Red
White
Blue
Neutral
Phase A
(Common)
(+24VDC)
HB330W
HB300W
Black
White
Red
(Control Output)
Load
Sequence of Operation
The HB3x0W occupancy sensor is designed to mount to a light fixture and control one load in the fixture. The sensor
can be wired to control all ballasts in the fixture, or to control half of the ballasts to provide high/low lighting control.
When motion is detected within the sensor’s coverage area, the relay in the sensor closes, and lighting loads turn on
automatically. When motion is no longer detected for the duration of the time delay setting, the relay opens and the
lighting load is turned off. The sensitivity and time delay settings are factory preset at 100% and 15 minutes, respectively, which are suitable for most high bay applications. However, the values can be easily adjusted for specific applications using the DIP switches on the unit. Refer to the Installation Instructions for changing factory preset values,
and for important start up instructions.
Ordering Information
Master Pack Details
Catalog #
Inner Pack Details
Master
Pack
Quantity
Case dimensions (inches)
Length
Width
Height
HB300W
50
18.50
21.50
HB330W
50
18.50
HB340W
50
HB350W
HB350W-CC2
BZ-50
Catalog #
Weight
(pounds)
Inner
Pack
Quantity
Case dimensions (inches)
Length
Width
Height
16.50
25.0
N/A
N/A
N/A
N/A
N/A
21.50
16.50
25.0
N/A
N/A
N/A
N/A
N/A
18.50
21.50
16.50
27.8
N/A
N/A
N/A
N/A
N/A
50
18.50
21.50
16.50
25.5
N/A
N/A
N/A
N/A
N/A
50
18.50
21.50
16.50
26.5
N/A
N/A
N/A
N/A
N/A
40
13.58
13.46
9.06
15.0
10
6.30
13.0
3.93
3.55
Color
Description
Voltage
Load Capacity
Weight
(pounds)
q
HB300W
White
Wet Low Voltage High Bay Sensor (Bulk Packaged)
24 VDC
Refer to Power Pack for Load Capacity
q
HB330W
White
Wet Line Voltage High Bay Sensor (Bulk Packaged)
208/240 VAC
5 A ballast @240 VAC
q
HB340W
White
Wet Line Voltage High Bay Sensor (Bulk Packaged)
347/480 VAC
5 A ballast @ 347/480 VAC
q
HB350W
White
Wet Line Voltage High Bay Sensor (Bulk Packaged)
120/277 VAC
0-800 W ballast and tungsten @ 120
VAC or 0-1200 W ballast @ 277 VAC or
1/6 hp motor
q
HB350W-CC2
White
Wet Line Voltage High Bay Sensor (Bulk Packaged)
120/277 VAC
0-800 W ballast and tungsten @ 120
VAC or 0-1200 W ballast @ 277 VAC or
1/6 hp motor
q
BZ-50
White
Power Pack
120/230 (1P,
L-N) /277 VAC
Information supplied above is subject to change.
Harmonization code: 8538908080. Country of origin: China.
Pub. No. OEM-10710 rev. 01/2015
www.LEGRAND.us/WATTSTOPPER