w w w. m i v a l t . e u 2016 Catalogue VALVES | PUMPS | COMPRESSORS | BLOWERS | FILTRATION CONTENT: Dear Customers, Our company has been present on the Czech and foreign markets with components for wastewater treatment, sewage systems and waterworks for nine years. We have always tried to respond to your changing needs and have continuously been adding new products and innovating our existing product range. In this updated general catalogue, you can find a brief introduction to new products as well as an extended offer of time-tested products. It presents a cross-section of our otherwise broad assortment, the great majority of which is available in stock so that we can meet all your requirements. Besides technical consultancy, we can also offer assistance and installation services. The updated catalogue follows up with our new website, which has been continuously updated and where you can find our complete product range including our own manufacturing program, which covers the production of MP DW series dewatering screw presses with a number of abovestandard technological solutions and options. 2–3 4–5 6–7 8–9 10 11 12 13 14 15 SOLENOID VALVES MP 116 two way valves; MP 116-5 two way high pressure valves MP 160 three way valve; MP 160-1 three way valve MP 163 two way valve, MPW stainless steel two way valves MPW 22 2/2 way valves, MPW 23 3/2 way stainless steel valve MP-T two way teflon valves, MP 116-8 2/2 way valves electro-actuator with ball valves MPA 20-T Single Electro-actuator with ball valves MPA 100-T Single Electro-actuator with ball valves pneumatic actuated piston valves RJQ – stainless steel pneumatic actuated piston valves RQ – right angle pneumatic actuated piston valves ball check valves 16 17 Ball non-return valves - with thread Ball non-return valves - with flange The website also provides useful information about equipment which brings power savings rotary VANE COMPRESSORS/VACUUM pumps or reduces wear and tear and damage of products, or provides greater user comfort. It includes, 18– 19 VRT/DRT 410–440 and VRT/DRT 3060–3140 Oilless Rotary Vanes Vacuum Pumps / Compressors for instance, programmable control units, soft starters, pressure and level-control switches and sensors, etc. As regards new products in this catalogue, I would like to draw attention to, for instance, electric actuators with ball valves and HIBLOW compressors. Our team looks forward to further cooperation with you and we believe that our offer will be able to help you respond to and succeed in satisfying the ever changing market needs. Ing. Petr Mívalt Sales and Executive Director, MIVALT s.r.o. MIVALT s. r. o. Prokofjevova 23, Brno 623 00, Czech Republic, ID: 28262239 Registered in the Commercial Register kept by the Regional Court in Brno, Section C, Insert 57219. Company MIVALT Ltd.is engaged in production and distribution of components for waste water systems. We supply across the EU Root‘s blowers, submersible sewage pumps, MATALA biofilters, diffusers / aeration elements, frequency converters, oil less compressors… www.mivalt .eu blowers 20 MPVB Vertical Root‘s Blower 22–23 RB 30, 40, 50, 60, 80 Side Channel Blower piston vacuum pumps and COMPRESSORS 24 25 26 RNS Small Vacuum Pumps RND/RVD Piston Vacuum Pumps and Compressors Membrane Compressor / Blower Hiblow MATALA FILTRATION 27 Matala Biofilter SEWAGE PUMPS 28–29 BAV – Submersible Sewage Pumps with Vortex impeller 30–31 GD / GDH – Submersible Sewage Pumps with grinder 32–33 DSP / DSPK – Submersible Sewage Pumps with Channel impeller 1 solenoid valves MP 116 two-way valves Type MP1162010A 2 Orifice (mm) 10 Connection • Membrane, indirectly driven 2/2 valve, • usage: water solutions, light oils up to 40 cSt and inert gases, • low noise with anti-shock effect for water, without vibrations, • coil embedded in thermoplastic material, • body of valve made from brass, • working differential pressure 0,2–10 Bar, • maximum pressure 16 Bar (1,6 MPa), • fluid temperature: -10 ÷ + 90 °C, • ambient temperature: -10 ÷ + 55 °C, • long life – 1 500 000 cycles/20 000 hours continous operation, • el. connection corresponds ISO4400/EN175301-803/A, • el. protection class IP65, • voltage tolerance: ± 10 %. Consumption Cv factor (m3/h) G 3/8” 23 AC (VA) DC (W) 14 8 MP1162015A 10 G 1/2” 23 14 8 MP1162020A 14 G 3/4” 42 14 8 MP1162025A 20 G 1” 83 17 20 Type G C F L J AC (V) 50 Hz 24, 230 DC (V) 24 A B H • Membrane, indirectly driven 2/2 valve, • usage: water, gas and light oils up to 40 cSt, • piston principle, smooth switching, high reliability, • maximum operating pressure 5 MPa, • working differential pressure 1–50 Bar (0,1–5 MPa), • fluid temperature: 0 ÷ + 90 °C, • ambient temperature: -20 ÷ + 55 °C, • long life – 1 500 000 cycles/20 000 hours continous operation, • el. connection corresponds ISO4400/EN175301-803/A, • el. protection class IP65, • voltage tolerance: ± 10 %. Consumption Orifice (mm) Connection Working pressure (MPa) Cv factor (m3/h) AC (VA) DC (W) MP116-5008 13 G 1/4” 0,1–5 2,52 14 8 MP116-5010 13 G 3/8” 0,1–5 2,52 14 8 MP116-5015 13 G 1/2” 0,1–5 2,52 14 8 MP116-5020 20 G 3/4” 0,1–4 5,00 14 8 MP116-5025 25 G 1” 0,1–4 8,50 14 8 Type Input voltage solenoid valves MP 116-5 two-way high pressure valves Input voltage AC (V) 50 Hz 24, 36, 110, 230 DC (V) 24, 12 K Type G F J K L E B A G 1/4” 12 40 34 65 24 97 16 97 16 MP1162015A G 1/2” 38 14 50 26 71 85 40 80 MP116-5008 MP1162020A G 3/4” 45 16 58 31 80 96 40 80 MP116-5010 G 3/8” 12 40 34 65 24 MP1162025A G 1” 65 18 82 41 96 117 40 95 MP116-5015 G 1/2” 12 40 34 65 24 97 16 MP116-5020 G 3/4” 16 40 60 90 45 124 20 MP116-5025 G 1” 18 40 70 116 57,5 123 20,5 3 solenoid valves MP 160 three-way valve • Directly driven, solenoid 3/2 distribution valve, • usage: controlling fluid flow at low pressures up to 0,5 Bar, • compact, lightweight, • Kv factor 33 l/min, • response time: open 5–20 ms, • horizontal connection is input, • vertical bottom output is normally open, • vertical top output is normally closed, • upon switching on the coil (energizing), the valve switches and closes the bottom output and opens the topone, • voltage tolerance: ± 10 %. • Directly driven 3/2 valve, • solenoid 3/2 distribution valve is used for controlling flow of air and water at low pressures – up to 0,5 bar, • robust design, • Kv factor 33 l/min, • response time: open 5–20 ms, • possibility of connecting two or more of these valves in one valve island, • horizontal connection is input, • vertical bottom output is normally open, • vertical top output is normally closed, • upon switching on the coil (energizing), the valve switches and closes the bottom output and opens the topone, Elektormagnetický 3/2 rozdělovací ventil je předurčen k ovládání průtoků vzduchu a vodních roztoků při nízkých tlacích .Vodorovné připojení je vstup . Svislý spodní výstup je normálně otevřený • voltage tolerance: ± 10 %. , svislý horní výstup je normálně uzavřený . Při zapnutí cívky (přivedení proudu ) se klapka přepne a spodní výstup se uzavře a horní se otevře. ELEKTROMAGNETICKÝ VENTIL MP160-1 Připojení Connection G 1/2 4 Orifice (mm) 10 Working differential pressure (bar) Průchozí štěrbina [mm] Koeficient průtoku Kv [l/min] water (p = 1 Material Min Max Body Seal Weight (kg) Voltage (VAC) Consumption (Watt) 0 0,5 PP NBR 0,55 230 8 solenoid valves MP 160-1 three-way valve Connection G 1/2 Orifice (mm) 10 Maximální diferenční tlak [bar] min bar) Working differential pressure (bar) Min 0 max Material Tělo Material hmotnost [kg] Napětí Příkon [Watt] Těsnění Max Body Seal NBR 0,5 Polyamide with glass NBR Weight (kg) 0.45 0,65 Voltage Consumption (Watt) 230 8 (VAC) www.mivalt.eu www.mivalt.cz , E-mail: mivalt.petr@post.cz , mobil: +420 775 66 00 62 , T/F: +420 530 313 645 5 MP 163 two-way valve SOLENOID VALVES • Directly driven 2/2 valves, • medium: air, • differential pressure: 0–0,35 Bar, • maximum pressure: 1 Bar, • ambient temperature: -20 ÷ +55 °C, • fluid temperature: -25 ÷ +90 °C, • Kv factor 21 l/min, • response time: open 5–20 ms, • sealing: NBR, • aluminium body, • valve can operate in any position, • high reliability, long life, • orifice DN 12 mm, • consumption 9 Watt, • el. connection: ISO4400, IP65, • voltage tolerance: ± 10%. SOLENOID VALVES • Directly driven 4 x 2/2 valves, • medium: air, • differential pressure: 0–0,35 Bar, • maximum pressure: 1 Bar, • ambient temperature: -20 ÷ +55 °C, • fluid temperature: -25 ÷ +90 °C, • Kv factor 21 l/min, • response time: open 5–20 ms, • Sealing: NBR, • valve can operate in any position, • high reliability, long life, • orifice DN 12 mm, • consumption 9 Watt, • el. connection: ISO4400, IP65, • voltage tolerance: ± 10%. 6 • Works from zero pressure, • membrane directly controlled by core of coil over spring, • high reliability, long life, • medium: air/water/oil up to 40 cSt, • working pressure: air 0–10 Bar, water, oil: 0–7 Bar, • maximum pressure: 10 Bar (1 MPa), • ambient temperature: -5 ÷ 55 °C, • medium temperatures: for NBR membranes -10 ÷ +85 °C for Viton – water -10 ÷ +95 °C – air -25 ÷ +95 °C •material of body: brass (standard), stainless steal – suffix S, • sealing: NBR – standard, VITON – suffix V, EPDM suffix E, • normally closed – standard, normally open – suffix K, • voltage options: 230 V 50/60 Hz 24V 50/60 Hz, 24VDC, 12VDC, • el. connection: ISO4400, IP65, • voltage tolerance: ± 10 %. Orifice (mm) Connection Consumption AC (VA) Consumption DC (W) Weight (kg) Cv factor (m3/h H2O at Δp 1 Bar) MP-W16015 16 1/2” 26 30 0,8 4,8 MP-W20020 20 3/4” 26 30 0,8 7,6 MP-W25025 25 1” 26 30 1,2 12 MP-W35035 35 1¼” 28 30 1,8 24 MP-W40040 40 1¼” 28 30 2,4 29 MP-W50050 50 2” 28 30 4,0 48 Type MP 163–4 four-valves manifold SOLENOID VALVES MP-W stainless steel two-way valves Type A B C D K MP-W16015 93 56 106 69 G 1/2” MP-W20020 100 55 117 73 G 3/4” MP-W25025 104 78 125 99 G 1” MP-W35035 141 93 172 124 G 1¼” MP-W40040 141 93 172 124 G 1¼” MP-W50050 157 124 195 172 G 2” 7 SOLENOID VALVES MPW 22 2/2 way, MPW 23 3/2 way stainless steel valves Type Orifice (mm) Working differential pressure (Bar) Cv factor (m3/h) 8 • Series MPW 22 – 2/2 directly driven stainless steel, • series MPW 23 – 3/2 directly driven stainless steel, • body material: stainless steel 304, • valve can operate in any position, • high reliability, long life, • medium: air, water, • maximum pressure: 60 Bar (6 MPa), • ambient temperature: -40 ÷ +60 °C, • fluid temperature: -40 ÷ +95 °C, • sealing: FPM, • medium viscosity < 20 cSt, • response time: open 5–20 ms, • connector specification / el. connection: DIN4400/EN175301-803, IP65, • standard voltage 230 V/50 Hz, possibility of 12VDC, 24VDC, 24VAC, • power consumption 19 VA, • voltage tolerance: ±10 %. MPW22 MPW 156-2 2/2 way, MPW 156-3 3/2 way stainless steel valve SOLENOID VALVES • Series MPW 156-2 – 2/2 directly driven stainless steel, • serie MPW 156-3 – 3/2 directly driven stainless steel, • body material: stainless steel 304, • valve can operate in any position, • high reliability, long life, • medium: air, water, • working differential pressures: 0–7 Bar for 2/2, 0–4 Bar for 3/2 • max. static pressure: 16 Bar (1,6 MPa), • ambient temperature: -20 ÷ +60 °C, • fluid temperature: -20 ÷ +95 °C, • connection G1/4”, orifice DN 2 mm, • Kv factor = 2,4 l/min, • sealing: FPM, • medium viscosity: < 20 cSt, • response time: open 5–20 ms, • standard voltage 230 V/50 Hz, 12VDC, 24VDC, 24VAC, • consumption 7 VA for AC, 5 Watt for DC, • connector specification / el. connection: DIN43650, IP65, • voltage tolerance: ±10 %. MPW23 2 3 3,5 4 5 2 (NC) 2 (NO) 2 (universal) 0–55 0–26 0–16 0–14 0–10 0–7 0–20 0–8 1,8 3,5 4,3 5,4 6,8 1,8 1,8 1,8 www.mivalt.eu 9 SOLENOID VALVES MP-T two-way teflon valves • Directly driven 2/2 valve, • all teflon body, • PTFE separation membrane, • for aggressive chemicals or ozone, • response time: open 5–20 ms, close 25–100 ms, • el. protection class: IP65, • voltage tolerance: ± 10 %. Type Connection Orifice (mm) MP-T BSP 1/4“ 2,5 SOLENOID VALVES MP 116-8 membrane differential valves 4,0 6,0 BSP 3/8“ 4,0 6,0 FENGHUA XINGYU ELECTRON CO.,LT 8,0 BSP 1/2“ Address:12B01,No.1 building,Shangdong business center,No.1926 Cangh TEL:86-574-87029561 FAX:86-574-87029565 E-MAIL:mars@xy 6,0 9,0 12,0 BSP 3/4“ 10,0 15,0 Item Type Orifice (mm) Coil Working pressure (Bar) Temp. range Coil 5 Liquid Gas Liquid Gas Liquid 4,0 5,0 - - 1,5 4,0 1,8 2,5 4,0 - - 1,0 3,5 4,3 6,0 1,0 3,0 - - 0,5 2,0 9,5 4,0 2,5 4,0 - - 1,0 3,0 5,0 MP 10 (3/8“) 1,0 3,0 - - 0,2 1,0 10,0 0,5 1,0 - - - - 15,0 - - 3,0 5,0 - - 16,7 - - 1,5 3,0 - - 25,0 4,0 5 6,0 3E 8,0 6,0 MP 15 (1/2“) 9,0 12,0 MP 20 (3/4“) Type -5 ºC to +80 ºC 6 - - 0,5 2,0 - - 33,3 - - 1,0 3,0 - - 26,7 15,0 - - - 0,5 - - 41,7 Coil 5 Coil 6 H Coil 3E Coil 5 Coil 6 L Coil 3E Coil 5 Coil 6 Power SB116-81510 Voltage Orifice (mm) Connection kv factor (m3/h) MP116-81508 15 G1/4“ 1,9 14 8 MP116-81510 15 G3/8“ 3,0 14 8 MP116-81515 15 G1/2“ 3,8 14 8 SB116-82525 MP116-82020 20 G3/4“ 6,0 14 8 24 VDC SB116-84035 MP116-82525 25 G1“ 9,5 17 20 MP116-84035 40 G5/4“ 23,0 17 20 230 V 50 Hz SB116-84040 MP116-84040 40 G6/4“ 25,0 17 20 MP116-85050 50 G2“ 41,0 17 20 Type 10,0 A SB116-81508 Kv factor (L/min) Coil 3E Gas 2,5 MP 06 (1/4“) Coil 6 AC (VA) DC (W)SB116-81515 SB116-82020 24 V 50 Hz SB116-85050 Connection • Working pressure from 0,25 Bar to 16 Bar, 15 1.9 G1/4 • membrane indirect controlled, 3 • highG3/8 reliability, long life, 15 • medium: air/water/oil up to 40 cSt, 15 3.8 G1/2 • maximum pressure: 16 Bar, 6 G3/4temperature: -520 • ambient ÷ 55 °C, • medium 9.5 G1 temperatures: 25 for NBR membranes -10 ÷ +85 °C 1 40-10 ÷ +95 °C 23 /4 forG1 Viton •material 40 25 G11/2of body: brass (standard), stainless steal – suffix S, 50 41 G2 NBR – standard, • membrane: • normally closed – standard, • electric connection in according ISO 4400, IP 65, • voltage tolerance: ± 10 %. Coil 3E Coil 5 Coil 6 Coil 3E MP 06 (1/4“) 67,00 - 65,00 77,00 - 75,00 45,00 - 45,00 0,42 - 0,60 68,50 - 66,50 80,00 - 78,00 45,00 - 45,00 0,42 - 0,60 G G G1/4“ MP 15 (1/2“) - 93,00 - - 109,00 - - 70,00 - - 0,87 - G3/8“ MP 20 (3/4“) - 96,50 - - 116,00 - - 70,00 - - 1,00 - G1/2“ Coils 5 6 3E N 0.025-1 0.04-1 AC (VA) 66/46 66/50 9,2 18,5 25 10 G1/4 G3/8 G1“ G3/4 G5/4“ G1 1 G2“ G1 www.mivalt.eu /4 L H C 65 42 92 65 42 92 65 42 96 5065 103 42 77 9 100 6085 113 50 83 10 135 92 136 135 92 136 160 108 65 65 100 135 H C L G3/4“ G1/2 85 G6/4“ 10 W KV Weight (kg) MP 10 (3/8“) DC (W) Orifice 152 42 42 60 92 K 71 9 71 9 72 98 11 98 13 108 G11/2 135 92 13 G2 160 108 15 11 electro-actuators with ball valves MPA 20-T single action Electro-actuator with valve • Models: ½“, ¾“, 1“, • maximum working pressure: 1 MPa (10 Bar), • medium: fluid, gas, • voltage: 9–35 VDC/AC, 110–240 V AC, • peak current: 500 mA, • Guaranteed lifetime: 70 000 cycles, • Response time/opening/closing time: 6 seconds, • Valve body material: BRASS, AISI 304, AISI 316, • Actuator body material: thermoplastic, • Ball valve sealing: FKM, PTFE, • working path: 90°, • max. Torque: 2 Nm, • Cable length: 1,5 meter, • Medium temperature: 2 to +90° C (140° C with prolonged version). • Ambient temperature: 0–55°C, • Manual operation: possible with 9–35 VDC/AC version, • Position indication: visual, electrical switch possible, • Protection class: IP67. Dimension: MPA 100-T single action Electro-actuator with valve Product code: MPA xx xx - Txx xx x Type Connection D1/D2 DN (mm) D L1 L2 E1 H1 H2 MPA20xx-T15 xx BSP ½“ 15 15 63 14 25 83 17 MPA20xx-T20 xx BSP ¾“ 20 20 72 17 31 87 20 Single action actuator MPA20xx-T25 xx BSP 1“ 25 25 81 18 38 95 24 Size Electro actuator Valve For example: MPA20 NC – T25 316 H NC normally closed NO normally open Valve with flange for actuator MPA Valve dimensions: DN of valve Dimension: Valve material: B – Brass 304 – Stainless steel AISI304 316 – Stainless steel AISI316 – Standard H – above 90 °C 3 – Way valve www.mivalt.eu • Models:5/4“, 6/4“, 2“, • maximum working pressure: 1 MPa (10 Bar), • Models: ½“, ¾“, 1“, • maximum working pressure: 1,6 MPa (16 Bar), • medium: fluid, gas, • voltage: 9–35 VDC/AC, 110–240 V AC, • peak current: 500 mA, • Guaranteed lifetime: 70 000 cycles, • Response time/opening/closing time: 6 seconds, • Valve body material: BRASS, AISI 304, AISI 316, • Actuator body material: thermoplastic, • Ball valve sealing: FKM, PTFE, • working path: 90°, • max. Torque: 10 Nm, • Cable length: 1,5 meter, • Medium temperature: 2 to +90° C (140° C with prolonged version), • Ambient temperature: 0–55°C, • Manual operation: possible with 9–35 VDC/AC version, • Position indication: visual, electrical switch possible, • Protection class: IP67. Product code: MPA xx xx - Txx xx x Type Connection D1/D2 DN (mm) D L1 L2 E1 H1 H2 MPA100xx-T15 xx BSP ½“ 15 15 63 14 25 96 17 MPA100xx-T20xx BSP ¾“ 20 20 72 17 31 100 20 Single action actuator MPA100xx-T25 xx BSP 1“ 25 25 81 18 38 107 24 Size MPA100xx-T32 xx BSP 5/4“ 32 32 102 23 47 122 31 NC normally closed NO normally open MPA100xx-T40 xx BSP 1½“ 40 38 115 25 52 130 36 MPA100xx-T50 xx BSP 2“ 50 50 130 25 66 138 45 Valve dimensions: 12 electroactuator with ball valves elektropohon ventil For example: MPA100 NC – T50 316 H Valve with flange for actuator MPA DN of valve Valve material: B – Brass 304 – Stainless steel AISI304 316 – Stainless steel AISI316 – Standard H – above 90 °C 3 – Way valve 13 pneumatic actuated Celonerezový tlakem ovládaný piston valves pístový ventil Stainless steel RJQ pneumatic actuated piston valves pneumatic actuated piston valves RQ Right angle valves • Vizual indication, • easy installation, Vlastnosti • robust construction of operator AISI 304, • maintenance-free, ● Vizuální indikátor stavu • long life piston. ● Jednoduchá instalace • Simple construction, • robust, compact design single acting, • body of valve – brass • applications: food industry, medical devices, light industry, water treatments... Vrchní kryt top cover ● Konstrukce operátoru s minimálním opotřebením a velkou průtočnou kapacitou Píst Pružina piston spring ● Bezúdržbový Těsnění piston seal Pouzdro válce cylinder ● Operátor je z nerezi S304 ● Dlouhá životnost pístu, PTFE sedlo Pístnice Spodní kryt lower cover ● Protirázový účinek u verze se vstupem pod diskem piston rod Těsnění Tělo ventilu seal seat body valves Type Operator (mm) A B RJQ22S40-10 40 127,5 136 G3/8“ 69 27 50 G1/8“ RJQ22S40-15 40 127,5 136 G½“ 69 27 50 G1/8“ RJQ22S50-10 50 140 150 G3/8“ 69 27 60,5 RJQ22S50-15 50 140 150 G½“ 69 27 RJQ22S50-20 50 143 155 G¾“ 75,5 RJQ22S50-25 50 163,5 176 G1“ 90 RJQ22S63-25 63 174,5 189,5 RJQ22S63-32 63 190,5 207,5 D E F G G1/8“ Pilot material AISI 304 60,5 G1/8“ Medium water, air, oil, steam, acid 32 60,5 G1/8“ 39 60,5 G1/8“ Třmen stavu 77 G1“ indikace 90 39 G1-¼“ 117 50 77 Pilotní vstup G1/8”, G1/4” G1/8“ G1/8“ 207,5 G1-½“ 117 55 77 G1/8“ RJQ22S63-50 63 219,5 232,5 G2“ 145 70 77 G¼“ RJQ22S100-65 100 290,5 DN (mm) Operator (mm) RJQ22S40-10 13 40 RJQ22S50-10 13 50 RJQ22S40-15 13 40 RJQ22S50-15 13 50 Type Pressure (bar) 270 253 G2“ G2-½“ 145 Sada těsnění Kv (m3/ hod.) 70 170 Vrchní kryt AISI 316 190,5 233 PTFE Body material 63 80 Material valves seat Provedení šikmého ventilu zaručuje vysoký koeficient hlučnost a dobré těsnící vlastnosti Connectionprůtoku, nízkou G3/8“– G2½“ RJQ22S63-40 RJQ22S80-50 85 98 116 G¼“ G¼“ Temperature of medium Vizuální indikace stavu Type -10 °C ~ +180 °C Ambiant temperature -10 °C ~ +60 °C Installation any position RQ22HD-15 46 25 37 G½“ RQ22HD-20 54 31 37 G¾“ 38 37 G1“ Těsnění RQ22HD-25 Pilot medium air, natural gas, clean water Píst 0 ~ 16 bar 60,5 G1/8“ RQ22HD-15 G½“ 27 60,5 G1/8“ RQ22HD-20 54 31 Připojojení G3/8” - G2 1/2” 37 G3/4" 109 G1/8" RQ22HD-25 64.5 38 37 RQ22HD-40 80 53 55 RQ22HD-50 99.5 65 G¾“ RJQ22S50-25 22 50 22 63 G1“ RJQ22S63-32 31 63 RJQ22S63-40 35 RJQ22S63-50 H M 46 25 37 G1/2" 89.5 G1/8" 118 G1/8" 162 G1/8" 179 46 54 G1" 32 60,5 G1/8“ 39 60,5 G1/8“ 39 77 G1/8“ G1-¼“ 50 77 G1/8“ 63 G1-½“ 55 77 G1/8“ 45 63 G2“ 70 77 G¼“ RQ22HD-15 RJQ22S80-50 45 80 G2“ 70 98 G¼“ RQ22HD-20 RJQ22S100-65 Vzduch RQ22HD-25 www.mivalt.cz , mobil: +42022mm 775 66 00 62 , T/F: +420 530 313 645 58 100 G2-½“ , E-mail: mivalt.petr@post.cz 85 116 G¼“ Voda Tělo G1“ventilu 16 13 4 16 5 Model G1-1/2" 78 G1/8" RQ22HD-15 RQ22HD-20 Model DN Médium Pracovní Pilotní RQ22HD-25 (mm) tlak tlak RQ22HD-40 13mm RQ22HD-50 16mm RQ22HD-40 35mm RQ22HD-50 45mm Olej A B 2-D H M 25 G1/4" 37 G1/2" 89.5 G1/8" 31 37 G3/4" 109 G1/8" 37 G1" 118 G1/8" 55 G1-1/2" 162 G1/8" 99.5 78 G1/8" 179 G1/4" 65 4 5 -5~80℃ 0-8 bar 4 a� 8 bar 10 -20~150℃ (nejvy��í DN Médium 25 Model teplota) (mm) 40 www.mivalt.eu Pracovní Pilotní tlak tlak 89,5 G1/8“ Vrchní kryt Model A RQ22HD-15 Teplotní Kv rozsah (m3/h) A B 46 25 G1/8“54 31 118 PístRQ22HD-25 64.5 G1/8“ 38 162 RQ22HD-50 Těsnění G1/8“ 109 RQ22HD-20 RQ22HD-40 179 80 53 99.5 65 G¼“ 13mm RQ22HD-20 16mm 22mm RQ22HD-40 35mm RQ22HD-50 45mm NBR C 2-D Connection H 37 G1/2" 89.5 37 G3/4" 109 Body material Pilot 37 material G1" 55 Medium 78 118 G1-1/2" 162 G1/8" 179 M G½“– G2“ G1/8" Mosaz G1/8" G1/8" Mosaz G1/8" water,G1/4" air, oil Temperature of medium -10 °C ~ +95 °C Ambiant temperature -10 °C ~ +95 °C DN Médium Pracovní Pilotní (mm) tlak tlak RQ22HD-15 Těsnění C Teplotní Kv 64.5 38 rozsah (m3/h) 80 53 M Pístnice RQ22HD-25 10 40 27 50 Kv (m3/hod.) 45,5 G3/8“ PTFE 2-D G1/8“ RQ22HD-50 G1/8“ C 78 25 50 B 65 35 27 A G1-½“ RQ22HD-40 G1/8“ Model 55 DN (mm) Těsnící O-kroužek RQ22HD-25 22 Tělo ventilu 50 G½“ těsnění Pístní 53 Material valves seat H Model Těsněníkryt Spodní RQ22HD-20 27 G3/8“ Type Tělo ventilu Těsnění pístu RQ22HD-15 Pilot. pressure Píst 80 Pístnice Spodní kryt 3 ~ 10 bar 64,5 Pružina Pouzdro99,5 válce Work. pressure 18 16 2-D RQ22HD-50 Single-acting NC (bar) Work. pressure C (nerez S304) RQ22HD-40 max. 600 cSt (mm2/s) Working pressure B Píst Pružina Pouzdro válce Operátor Viskosity Pilot pressure A Pilot. pressure RJQ22S50-20 RJQ22S63-25 14 C Teplotní Kv rozsah (m3/h) 4 max. 4005 cSt (mm2/s) Viskosity Vzduch Voda Olej Pilot medium -5~80℃ 10 -20~150℃ any position (nejvy��í 25 teplota) 40 gas, air, natural Pilot pressure 4 ~ 8 bar Working pressure 0 ~ 8 bar 0-8 bar Installation 4 a� 8 bar clean water A 15 ball check valves BALL NON-RETURN VALVES – WITH THREAD • Used for one-way flow of sewage water, • applicable to the pressure sewer or pumping stations, • dimmension of the thread – DN32 to DN65, • connection thread „BSP“ according to ISO 228-1, • maximum working pressure 16 Bar, • operating temperature 10 ÷ 80 °C, • seating according to category A standard ISO 5208, • minimum back-pressure for tighteness: 0,3 až 0,5 Bar, • unreduced full flow, • self-cleaning rubbered iron ball, • stainless steel screws SS316, • low pressure drop, • silent operation, • removable bonnet for cleaning or changing the ball, • horizontal and vertical installation in the pipeline. Connection (mm) L B H DN32 32 135 50 72 DN40 40 145 60 85 DN50 50 175 70 100 DN65 65 200 90 125 Type 16 ball check valves BALL NON-RETURN VALVES – WITH FLANGE Type DN50 Connection (mm) L 50 200 • Used for one-way flow of sewage water, • applicable to the pressure sewer or pumping stations, • dimmension with flange – DN50 to DN300, • connection with flange DIN2533 PN19 and AS4087, • maximum working pressure 16 Bar, • operating temperature 10 ÷ 80 °C, • seating according to category A standard ISO 5208, • minimum back-pressure for tighteness: 0,3 až 0,5 Bar, • dimmensions of flange type according to EN-558-1 series 48 (DIN3202 F6), • unreduced full flow, • self-cleaning rubbered iron ball, • stainless steel screws SS316, • low pressure drop, • silent operation, • removable bonnet for cleaning or changing the ball, • horizontal and vertical installation in the pipeline. Dimensions (mm) D D1 D2 N-D B 165 125 102 4–19 19 H 100 DN65 65 240 185 145 122 4–19 19 125 DN80 80 260 200 160 138 8–19 19 136 DN100 100 300 220 180 158 8–19 19 185 DN125 125 350 250 210 188 8–19 19 196 DN150 150 400 285 240 212 8–23 19 265 DN200 200 500 340 295 268 12–23 20 340 Type Name Material Type Name Material 1 Screw Stainless steel 316 1 Body GG 40 s FEB coated 2 Ball Steel+ EPDM / NBR 2 Ball Steel + EPDM / NBR 3 Body GG40 s FEB coated 3 Bonnet GG40 4 Bonnet GG40 4 Bonnet seal NBR or EPDM 5 Bonnet seal NBR or EPDM 5 Screw Stainless steel 6 Nut Stainless steel www.mivalt.eu 17 vrt / DRT 410–440 VRT / DRT 3060–3140 oilless rotary vane compressores / vacuum pumps ROTARY VANE COMPRESSORS/ VACUUM PUMPS ROTARY VANE COMPRESSORS/ VACUUM PUMPS Oilless rotary vane compressores / vacuum pumps Application: BACCA. Vacuum pumps and compressores VRT/DRT produce vacuum and compressed air absolutelly oil-less, for this reason they are used especially in following sectors: • automotive industry, • food processing, • vacuum manipulations, • printing and wood industry, • waste water systems. BACCA is a serie of oil-free rotary vane vacuum pumps and compressors. Facilities for vacuum application are labeled as VRT and for pressure applications DRT. Vacuum pumps and compressors BACCA are intended for continous operation and are commonly used in various industrial applications. The device is supplied in single-phase or three -phase design. Models DRT 425K and DRT 440K have installed cooler of outlet pressed air. Main benefits: • high reliability, • long life of bearings and vanes, • precise execution, • fine-filter of intake air is included, • compatibility of some parts with other manufactures, • fast customer service. Vane rotary compressor DRT 3140 Max. flow (m3/h) Type 18 Max. vacuum abs. (mbar) Max. pressure rel. (mbar) 50 Hz 60Hz DRT/VRT 410 10 12 150 DRT/VRT 416 16 19 DRT/VRT 425 25 DRT/VRT 440 Motor power (kW) Noise dB (A) Weight (kg) 50 Hz 60 Hz 50 Hz 60 Hz 1000 0,37 0,45 58 60 21 150 1000 0,55 0,70 59 61 24 30 150 1000 0,90 1,10 60 62 32 40 48 150 1000 1,25 1,85 65 68 38 DRT/VRT 3060 55 66 100 1500 1,30 1,70 71 73 70 DRT/VRT 3080 67 78,5 100 1500 1,70 2,20 72 75 70 DRT/VRT 3100 98 112 100 1500 2,60 3,30 75 77 103 DRT/VRT 3140 129 154 100 1500 3,30 4,40 76 79 113 www.mivalt.eu 19 BLOWERS MPVB Root‘s blower MPVB Root‘s blower • Very silent and compact blower with intake and exhaust silencer • high efficiency, • low vibrations, long life, • rotors are precisely machined on CNC machines and dynamically balanced, • including check valve to avoid any possibility of sucking water to blower due wrong wiring of phases. • standard flange type, 4 poles, asynchronous electromotors are used, • blower can operate outdoor, • directly driven by electromotor through flexible clutch (no belts that require replacement and tensioning) • electromotor protection IP 55, • no need of any special seating or mounting, blower has its own silent-blocks, just needs to stand of flat surface. blowers Installation dimensions: Type A B C MPVB 40 590 345 830 MPVB 50 670 420 1039 MPVB 65 727 450 1055 MPVB 75 824 465 1250 MPVB 80 824 465 1295 MPVB 90 884 533 1408 MPVB 100 952 580 1438 MPVB 125 1070 580 2006 MPVB 150 1266 703 2045 MPVB 160 1278 703 2111 Flow / consumption ad certain pressure Type 20 Bore (mm) 100 mBar 200 mBar 300 mBar 400 mBar 500 mBar 600 mBar Flow m3/min Power kW Flow m3/min Power kW Flow m3/min Power kW Flow m3/min Power kW Flow m3/min Power kW Flow m3/min Power kW - MPVB 4075 40 0,74 0,42 0,65 0,50 0,50 0,60 0,45 0,71 - - - MPVB 5015 50 1,40 0,99 1,30 1,23 1,20 1,32 1,10 1,44 - - - MPVB 5022 50 - - - - - - - - 1,00 1,78 0,90 MPVB 6522 65 2,10 1,33 2,00 1,54 1,90 1,78 1,80 2,07 - - MPVB 6537 65 - - - - - - - - 1,70 2,47 MPVB 7537 80 2,70 1,82 2,60 2,19 2,50 2,73 2,40 3,22 2,30 3,65 MPVB 7555 80 - - - - - - - - - - MPVB 8055 80 4,20 2,72 4,00 3,23 3,80 4,09 3,60 4,82 3,50 5,48 Noise (dB) Weight (kg) 49 65 60 130 2,00 65 140 - - 64 165 1,75 2,79 68 170 - - 70 200 2,27 3,97 74 215 - - 73 240 MPVB 8075 80 - - - - - - - - - - 3,51 5,96 78 265 MPVB 9011 100 6,10 4,95 5,80 5,80 5,50 7,15 - - - - - - 75 280 MPVB 9075 100 - - - - - - 5,20 8,02 5,00 8,74 4,92 9,63 79 295 MPVB 10011 100 8,0 6,15 7,40 6,82 7,00 8,05 6,60 9,09 6,20 10,30 - - 78 320 MPVB 10015 100 - - - - - - - - - - 6,40 11,70 79 335 MPVB 12515 125 11,4 7,8 10,8 8,83 10,2 10,7 9,69 12,8 9,24 14,6 - - 86 520 MPVB 12518 125 - - - - - - - - - - 8,85 16,2 86 580 MPVB 15022 150 17,8 9,96 17,10 14,00 16,5 16,00 15,80 18,00 15,30 21,00 - - 87 820 MPVB 15030 150 - - - - - - - - - - 14,90 24,60 87 880 MPVB 16030 150 25,4 14,8 23,9 18,1 22,5 22,1 21,7 25,8 20,9 29,2 - - 89 980 MPVB 16037 150 - - - - - - - - - - 20,1 33,1 89 1020 www.mivalt.eu Detailed technical drawing in electronic version (.dwg) with dimensions upon request... 21 blowers blowers MAIN BENEFITS: • trouble-free operation, • long life. • high quality grease bearings, • pure, oil-free air, • blower rotor is not in contact with the stator. RB BLOWERS PARAMETERS: • consumption 0,20–7,5 kW, • maximum flow from 0,8 to 8,5 m3/min, • maximum vacuum from -50 to -450 mbar (rel), • maximum pressure from +60 to +570 mbar (rel). Blowers accessories: We offer complete accessories for RB blowers. We will reccomend you accessories for your application to be possible easily plug and run. We usually supply: inlet filters, relief valves for pressure/vacuum applications, elbows, endings. Flow (m3/min) RB 30, 40, 50, 60, 80 side chanell blowers Performance curves Pressure (mBar) One stage blowers BLOWERS APPLICATION: Blowers are designed for daily use in pressure, vacuum and combined applications. The most common applications are: healthcare, transport granules, manipulators, industrial vacuum cleaners, printing and wood industry, packaging, waste water systems. One stage blowers Type 3-phase 1-phase Perf. curve no. Power (kW) RB 20-5R3 22 0,22 RB 20-590 22 0,22 RB 30-6R3 31 0,4 RB 30-690 31 0,4 RB 40-4R3 42 0,75 Voltage possibilities (U1, V1, W1, U2, V2, W2) 208-255 / 360-440 (220-240) Installation dimensions: Max. pressure / vacuum for continuous operation (mbar Noise (dB) 0,9 60 / 65 64 9,80 0,9 65 / 65 64 10,5 Max. flow (m3/min) Weight (kg) B width (mm) C height (mm) D conn. (mm) RB20 225 212 238 ø 30 256 230 257 G1¼ G1½ 1,3 100 / 105 69 13,0 RB30 1,3 100 / 105 69 14,9 RB40 261 255 303 2,4 150 / 155 69 15,3 RB50 468 466 521 G2½ 394 382 413 ø 55 487 466 546 G2½ RB 40-5R3 43 0,9 2,4 180 / 180 69 16,0 RB60 RB 40-6R3 44 1,1 2,4 200 / 200 69 17,2 RB80 RB 40-690 44 1,1 2,4 190 / 190 69 19,2 RB 50-5R3 51 1,5 3,5 180 / 180 73 23,5 RB 50-6R3 52 2,2 3,5 250 / 250 73 26,0 RB 50-590 51 1,5 3,5 160 / 160 73 26,0 RB 60-5R3 61 2,2 5,1 220 / 220 76 36,0 RB 60-6R3 61 3,0 5,1 280 / 280 76 38,4 RB 60-7R3 61 4,0 5,1 340 / 340 76 41,5 RB 80-5R3 81 5,5 8,5 300 / 300 73 120 RB 80-6R3 82 7,5 8,5 400 / 400 73 123 208-255 / 360-440 220-240 / 380-415 Two stages blowers 22 A lenght (mm) Type Type Perf. curve no. Power (kW) RB 30-1-B0 101 0,75 RB 40-1-8B0 112 2,2 RB 50-1-7B0 121 3,0 RB 50-1-8B0 122 RB 60-1-7F0 Voltage possibilities (U1, V1, W1, U2, V2, W2) Two stages blowers Installation dimensions: Type A lenght (mm) B width (mm) C height (mm) D conn. (mm) E (mm) 64 317 Maximum flow (m3/min) Max. pressure / vacuum for continuous operation (mbar) Noise (dB) Weight (kg) RB30 316 284 271 RB40 392 321 315 72 321 1,5 210 / 240 55 14 RB50 495 372 345 82,5 411 2,5 330 / 440 66 27 RB60 586 426 410 82,5 424 3,9 340 / 410 72 39 4,0 3,9 390 / 490 72 43 131 4,3 5,2 360 / 380 73 53 RB 60-1-8F0 132 5,5 5,2 440 / 500 73 70 RB 60-1-9F0 133 7,5 5,2 440 / 570 73 77 220-240 / 380-415 360-440 360-415 www.mivalt.eu Detailed technical drawing in electronic version (.dwg) with dimensions upon request... 23 PISTON VACUUM PUMPS and COMPRESSORS RNS Small vacuum pumps • Oil-less operation, permanently lubricated bearings, • silent operation, • stainless steel check valves and alluminium body, • low weight, • small vibrations, • long life and easy maintenance, • application: medical devices, dental applications, oxygen concentrators, ozone generators, assembly lines for electronic components, packaging machines, enviromental usage,.. • electrical protection IP20. PISTON VACUUM PUMPS and COMPRESSORS RND/RVD Vane and piston compressors • Oil-less operation, permanently lubricated bearings, • silent operation, • stainless steel check valves and alluminium body, • low weight, • small vibrations, • long life and easy maintenance, • application: medical devices, dental applications, oxygen concentrators, ozone generators, assembly lines for electronic components, packaging machines, enviromental usage, • electrical protection IP20. Lenght (mm) Width (mm) Height (mm) RND 80-140 RVD40-70 240 117 178 RNS 70 RNS 40-60 155 117 178 RNS 12-20 143 94 118 Type Type Description Single-piston 20 RNS Configuration 18 RNS 15 RNS 12RNS Vacuum pump/ compressor Type Free flow (LPM) 20 18 15 12 Max. vacuum (mmHg) 650 630 610 600 Max. pressure (Bar) 6,5 5 4,5 3,5 Connection Weight Motor type Consumption Voltage Description Two-piston 140 RND 120 RND Connection Configuration Pipeline (dimmension: inner diameter must be less than 8 mm) 1,7 kg 4-pole, capacitor start, equipped with internal thermal protection and cooling fan 40 W 230–240 VAC (50 Hz) 100 RND 80 RND Type 70 RVD 60 RVD 50 RVD 40 RVD Description Configuration Parallel Serial Vacuum pump / Compressor Only vacuum pump Single-piston 70 RNS 60 RNS Vacuum pump only 50 RNS 40 RNS Vacuum pump / compressor Free flow (LPM) 70 60 50 40 Free flow (LPM) 140 120 100 80 70 60 50 40 Max. vacuum (mmHg) 700 690 680 650 Max. vacuum (mmHg) 700 690 680 650 750 745 740 720 - 2 4 7 Max. pressure (Bar) Max. pressure (Bar) 2 4 10 10 - - - - Conection Weight Noise level Motor type Consumption Voltage Connection G 1/4“ G 1/4“ Weight 7,1 kg Noise level 50–53 dB Motor type Capacitor start, equipped with internal thermal protection and cooling fan 55–58 dB 51–53 dB Capacitor start, equipped with internal thermal protection and cooling fan 250 W Consumption Voltage 4,2 kg 130 W 230–240 V AC (50 Hz) 230–240 V AC (50 Hz) Detailed technical drawing in electronic version (.dwg) with dimensions upon request... 24 www.mivalt.eu 25 Small & medium capacity air pump Small & medium capacity air pump HP- 40 / 60 / 80 C A B F 37 E ij TYPE A B C D E F HP-40 208 20 171 120 90 190 HP-60/80 235 21 180 130 100 196 A B C HP-40 12.8 208 20 171 235 21 180 HP-40 D 20 Power frequency Hz 50 35 Rated pressure 36 kPa 12.8 frequency14.7 • Low therapeutic equipment 35 and &80scientific apparatus, 6090 40 other medical 120 • Septic tank (biological contact aeration), 51 38 71 • Bubble bath (air bubble injection), 35 32 36 • Oxygen supply for fish breeding. 5.7 7 Sound level dBA 32 Weight kg 5.7 130 50Hz 60Hz (unit: mm) F 90 14.7190 100 HP-60 196 20 [kPa] 30 40 0 0 10 20 [kPa] HP-40 kPa Noise Weight dBA kg Weight HP-80 14.7 0 Type 70 HP-40 50 0 10 14.7 20 [kPa] 30 40 XP-40 40 30 20 120 B C 208 20 171 235 21 180 80 40 40 60 80 30 39 58 35 W Sound level dBA 33 Weight kg 4.1186 10 20 [kPa] 0 30 50Hz 14.7 12,8 L/min 40 20 W 30 [kPa] 38 40 dBA 32 kg 5,7 HP-60 36 4.3 120 100 F 120 90 190 130 100 196 10 20 [kPa] 30 40 230 V / 50 Hz 60 0 Voltage 14,7 25 0 2071 [kPa] 35 50 36 7 HP 100/120/150/200 17,7 L/min 0 Consumption 40 0 10 W 20 Noise dBA Weight kg HP-150 [kPa] 100 95 30 20 120 100 40 115 50 38 125 40 8,57 200 125 155 0 0 10 12.8 20 [kPa] 30 45 47 46 48 50 60 50 12.8 Airflow volume L/min 40 60 80 14.7 Power consumption W 30 39 58 Sound level dBA 33 35 36 Type XP-60 14.7 120 kg 4.1 10 [kPa] 20 60Hz 4.3 Specific surface Free volume % black 3 150 m /m 92 % green 290 m2/m3 93 % blue 365 m2/m3 94 % gray 460 m /m 94 % 2 2 3 Rated pressure 100 80 80 12 60 40 30 0 XP-80 14.7 120 100 20 10 0 60 40 XP-40 30 250 0 50 Rated pressure kPa 50Hz 40 210 Options: • sheets: 1 000 × 1 200 × 40 mm, •60pipes: ID Ø43 mm, OD Ø110 mm, lenght up to 220 cm, • roles: 150 mm × 400, 600, 800, 1200 mm. 40 20 150 Hz XP-80 60 HP-200 50 230 V / 50 Hz kPa Flow 30 HP-120 Power frequency XP-60 AC100 / 120 / 230 80 80 V Working pressure 80 51 10 HP-100 V Weight 20 0 Rated voltage 120 XP-80 14.7 60 100 HP-80 50 XP-40 Rated pressure 35 60Hz XP-60 90 E HP-80 14.7 (unit: mm) 208 ij 20 0 0 150 60 Airflow volume L/min • It is a highly airy three-dimensional structure PP with a surface serving as an organic carrier, • four different densities of material allow creating progressive mechanical and biological filtration, • good adhesion properties for nitrifying bacteria, • large number of different three-dimensional interspace increases the steady growth of bacteria, • large capacity, • easy maintenance – easy to clean, • self-supporting, • easy cutting and slicing, • made from non-toxic materials – pure PP. 14.7 Power consumption D 100 Rated pressure 10 50 HP-60 ij A 60 HP-60/80 60Hz 60 12.8 80 50 40 100 [L/min] [L/min] Working pressure 0 30 HP-40 V Consumption 0 10 Sound level 50 12.8 70 Voltage Flow W 75 30 10 Power consumption 50Hz 12.8 20 Airflow volume L/min 186 60 Rated pressure kPa [L/min] 10 Applications: 60 50 [L/min] 0 71 7 Rated pressure 150 80 AC120 / 230 100 50 40 26 51 25 50 11 60 38 [L/min] 30 10 11 40 W 75 [L/min] [L/min] E 120 100 40 0 Airflow volume L/min Power consumption E ij TYPE HP-60/80 37 V 12.8 (unit: mm) D 50 F 14.7 voltage Rated Rated pressure kPa [L/min] D XP- 40 / 60 / 80 [L/min] B Pressure type Dust control “Dust trap filter” Outdoor (Rainproof) use Easy restart by micro swith (XP-60 / 80 only) • Compressor Hiblow is equipped with high-efficient No need of grounding Pressure type Pressure type electromagnetic vibration motor, Outdoor (Rainproof) use Dust control “Dust trap filter” Outdoor (Rainproof) use • because there no resistances Easy restartare by micro swith (XP-60 / 80 only) in bearings and need ofthe grounding there is noNofriction, compressor is significantly Outdoor (Rainproof) use cheaper to operate (lower power consumption)• Septic tank (biological contact aeration) • Low frequency therapeutic equipment and other medical & scientific apparatus • Air injection for bubble bath compared to compressors equipped with classic aeration) • Low frequency therapeutic equipment • Septic tank (biological contact • Septic tank (biological contact aeration) • Small capacity compressor and other medical & scientific apparatus • Air injection for bubble bath motors, • Bubble bath (air bubble injection) • Septic tank (biological contact aeration) • Small capacity compressor • Oxygen supply for breedinganchor/shuttle is directly connected • Bubble bath (air bubble injection) • fish magnetic • Oxygen supply for fish breeding by membranes, which drives and at the same time it is ideally centered in magnetic field of coils, • this air blower / low pressure membrane compressor / membrane blower excels with its long life and (unit: mm) 132 208 HP-40 HP-60 HP-80 XP-40 XP-60 XP-80 trouble-free operation (our experiences confirm C Rated voltage V AC120 / 230 AC100 / 120 / 230 V Rated voltage 132 HP-40 two to six years without HP-60 HP-80 exchange membranes). 60 50 60 50 60 60 50 60 50 60 Power frequency Hz 50 Power frequency Hz 50 Small & medium capacity air pump [L/min] A matala filtration Matala Filtration capacity air pump [L/min] HP- 40 / 60 / 80 Smalltype & medium Pressure [L/min] HP 40/60/80 Small & medium capacity air pump XP- 40 / 60 / 80 KOMPRESORY HIBLOW 60 40 20 0 10 20 [kPa] 30 40 0 0 10 20 [kPa] 30 40 9 12 27 A large portion of our business involves the selling of pumps. For the territory of eastern Europe, we are the exclusive representative of Taiwanese producer of pumps - company APP. From wide assortment of producer, we focus especially on submersible sewage pumps: SEWAGE PUMPS BAV – Submersible Sewage Pumps with Vortex impeller • SMALL SEWAGE PUMPS for pumping of household sumps, or small waste-water systems: series BAV, BCV, RV, TPS, flow from 30 to 300 l/min, head up to 12 meters max, • INDUSTRIAL SEWAGE PUMPS for large/middle pumping stations: series ADVS, ADL, flow from 200 to 2 300 l/min, maximum head up to 20 meters, • SEWAGE PUMPS FOR HIGHER LOAD and denser sludge waters: series DSP flow from 200 to 3 000 l/min, head to 30 meters, • SEWAGE PUMPS WITH CUTTER: DSPK series, flow from 200 to 3 000 l/min, head up to 30 meters, • SEWAGE PUMPS WITH GRINDER: series GC, GD, GDH, flow from 50 to 400 l/min, head up to 30 meters. All pumps, as single phase so three phase, include thermal protection, made by Japanese company YAMADA. Type Power Output Solid pass Max. flow Max. head Dimmensions Weight 7,5 m m L × W × H (mm) kg LPM flow / head W mm inches Ø (mm) (LPM) 1,5 m 3m 4,5 m 6m BAV 150 150 32 1–1/4“ 10 160 150 115 60 - - 6 186 × 131 × 304 7 BAV 250 250 40 1–1/2“ 25 200 190 160 120 70 15 8 196 × 131 × 314 9 BAV 400 400 50 2“ 30 300 290 270 235 185 125 10 224 × 143 × 350 11 BAV550 550 50 2“ 35 340 330 305 270 225 170 12 224 × 144 × 365 12 Power Cable Export Insulation. Treatment. No water leaking. SEWAGE PUMPS BAV YAMADA thermal protection. • Submersible, sewage, non clogging pump, • Vortex impeller, • solid pass: 10–35 mm, • fluid temperature: 0–40 °C, • power: 1/5 HP to 3/4 HP / 150 W to 550 W, • pH range: 6–8, • rated speed: 2 900 rpm, • maximum submersion: 6 m, • material: gray cast iron, • motor – stainless steel, • electrical protection: IP68. Type PSC motor. Motor B class insulation, Long service life. A (mm) B (mm) C (mm) BAV 150 304 131 186 BAV 250 314 131 196 BAV 400 350 143 224 BAV 550 365 144 224 Pump can endure corrosion & Long service life over 5 years by the industrial plastic top cover & one piece design stainless steel motor casing. Oil Seal prevents sand and fine piece foreign matters to enter. Oil Chamber Design can give the mechanical seal long service life. High Efficacy Slippage Casing Design. Low resistance & low consuming electricity. Non-Clogging Vortex Impeller Design. No blocking. Head Optional Removeable Strainer. Flow 28 BAV-S: with strainer. BAV: without strainer. Impeller Design. 29 SEWAGE PUMPS GD / GDH GD / GDH – • GD submersible, sewage pump with grinder, • GDH for pumping high head with grinder, • fluid temperature: 0–40 °C, • power: 1,5–3 HP/1,1 kW to 2,2 kW, • pH range: 6–8, • rated speed: 2 900 rpm, • maximum submersion: 8 m, • material: gray cast iron, motor – stainless steel casing, • electrical protection: IP68. Submersible Sewage Pumps with grinder SEWAGE PUMPS Power Cable Export Insulation Treatment. No leaking issue. YAMADA thermal protection. H Class Copper Wire (180 ºC). B Class Motor Insulation (120 °C). Power Hz 50 Output Type Max. flow LPM flow / head (l/min) Max. head Dimmensions Weight kW mm inches l/min 5m 10 m 15 m 20 m 25 m m L × W × H (mm) kg GD-15 1,1 32 1–1/4“ 180 170 150 80 - - 20 237 × 198 × 520 30 GD-20 1,5 32 1–1/4“ 200 190 155 110 45 - 25 237 × 198 × 540 32 GD-30 2,2 32 1–1/4“ 230 210 195 160 110 40 28 237 × 198 × 540 35 GDH-15 1,1 32 1–1/4“ 100 95 85 70 40 20 30 246 × 172 × 539 30 GDH-20 1,5 32 1–1/4“ 160 155 145 120 75 35 30 250 ×194 × 541 32 Double Bearings to ensure steady shaft operation & long service life on mechanical seal and grinding rings. Fixed Double Mechanical. Seals to ensure pump Long service life. For GDH High Pressure. High Head. High Hardness & Anti-Wearing Grinding Rings can crush all the foreign matters. Type A mm B mm C mm D mm E mm F mm G mm H mm I mm J mm K mm L mm GD-15 572 538 152 275 133 32 25,4 125 70 15 17,5 65 GD-20 597 538 152 275 133 32 25,4 125 70 15 17,5 65 GD-30 596 543 152 275 133 32 25,4 125 70 15 17,5 65 GDH-15 572 538 152 275 133 32 25,4 125 70 15 17,5 65 GDH-20 574 542 152 275 133 32 25,4 125 70 15 17,5 65 Head (M) Cutter Imepller Design. Flow 32 30 2“ outlet 1 1/4“ outlet 33 31 SEWAGE PUMPS DSP / DSPK DSP / DSPK – Submersible SEWAGE PUMPS Sewage Pumps with Channel impeller • DSP submersible, sewage pump, • DSPK with cutter, • for dense sludge water (8%), and severe, long-term load, • fluid temperature: 0–40 °C, • power: 1–15 HP/0,75 kW to 11 kW, • pH range: 6–8, • rated speed: 2 900 rpm, • maximum submersion: 8 m, • material: gray cast iron, motor – stainless steel casing, • optional impeller from stainless steel, • above 3,5 kW we reccomend to use soft-starter (or star delta starter), • electrical protection: IP68. Anti Broken Design. Cable Life Extended. YAMADA thermal protection. Well protection. 3 Bearings. Good Balance. Thick SS Motor Body. Shock Proof. Power Output Solid pass Max. flow Type LPM flow / head Max. head Dimmensions Weight W mm inches Ø (mm) l/min 3m 6m 9m 12 m 15 m m L × W × H (mm) kg DSP-10 0,75 50 2“ 30 400 370 270 180 60 - 14 250 × 183 × 487 31 DSP-20 1,5 80/100 3“/4“ 40 800 750 620 480 310 150 18 400 × 240 × 545 37 DSP-30 2,2 80/100 3“/4“ 40 1 200 1130 990 800 590 380 20 425 × 220 × 615 55 DSP-50 3,7 80/100 3“/4“ 45 1 300 1270 1170 1000 790 530 22 425 × 220 × 615 57 5M 10 M 15 M 20 M 25 M DSP-75 5,5 100/150 4“/6“ 50 1 900 1840 1500 900 360 - 24 485 × 300 × 735 99 DSP-100 7,5 100/150 4“/6“ 65 2 300 2260 2000 1500 800 200 27 485 × 300 ×840 109 DSP-150 11 100/150 4“/6“ 65 3 000 2960 2800 2400 1800 980 32 585 × 340 × 875 149 3 Oil Seals. The concavity design for the impeller inserts into oil seal. This prevents sand from demaging the oil chamber. Type A mm B mm C mm D mm E mm F mm G mm H mm I mm J mm K mm L mm 2“ DSP-10 496 546 152 275 133 32 25,4 125 70 15 17,5 65 DSP-20 673 631 230 366 202 32 25,4 125 70 15 17,5 65 DSP-30 693 640 230 366 202 32 25,4 125 70 15 17,5 65 DSP-50 740 641 230 366 202 32 25,4 125 70 15 17,5 65 DSP-75 825 558 152 310 154 48 40 92 200 25 15,5 87 DSP-100 870 561 152 310 154 48 40 92 200 25 15,5 87 DSP-150 912 596 152 310 154 48 40 92 200 25 15,5 87 DSP-75 825 558 152 331 280 48 40 92 200 25 15,5 87 DSP-100 870 561 152 331 280 48 40 92 200 25 15,5 87 DSP-150 912 596 152 331 280 48 40 92 200 25 15,5 87 4“ 6“ Separated Chamber to reduce the water impact to mechanical seal (For 3HP ~ over). Solid Single Channel Impeller. Strong liquid carrier. Inches 3“ 4“ Double Mechanical Seal (SIC/SIC + CA/CE + NBR) = Longevity. Head (M) Slide kits are available for easy removal and reinstallation. Flow 32 2~5HP 7.5~15HP Optional cutter impeller for cutter pump application. Copyright © MIVALT Ltd., all rights reserved. Photos of products from the catalog are for information only. MIVALT Ltd. is not responsible for any printing errors. 33 w w w. m i v a l t . e u Prokofjevova 845/23 Brno, Czech Republic +420 513 036 228 / +420 775 660 062 mivalt@mivalt.eu 2016 Catalogue VALVES | PUMPS | COMPRESSORS | BLOWERS | FILTRATION