MOST FREQUENTLY
USED PAINTS
PROTECTING CUSTOMERS’ INVESTMENTS
Founded in 1915 as a supplier of paints for the
marine segment and heavy industry, Hempel is today
a leading global company in industrial coatings. We
produce and sell paints to the Marine, Protective,
Container, Yacht and Decorative segments. Our
coatings protect customers’ investments from the
corrosive forces of nature to extend their lifetimes,
reduce maintenance costs, and make them more
attractive.
Hempel offers high-quality anticorrosive paints
intended mainly for the surface protection of steel
structures in infrastructure, petrochemical plants,
cranes, wind turbines, bridges, railway carriages,
chemical plants and other segments. Hempel puts
emphasis on the development and delivery of
economical and environmentally friendly solutions
to help customers meet environmental standards
while controlling costs. We also offer customised
solutions based on extensive research and broad
international experience.
In addition to classic solvent-based paints (typically
with high volume solids), the product assortment
includes water-based paints and specialised
paints for specific conditions. Hempel offers paints
based on: silicone resins, alkyds, vinyls, acrylates,
epoxy-esters, epoxides, epoxy tars, polyurethanes,
zinc silicates, and silicones.
Numerous testing and research institutions have given their approval
to Hempel’s paints. The products are certified for various operating
conditions and meet today’s regulatory requirements.
A GUIDE TO MOST FREQUENTLY USED PAINTS
This overview presents only selected paints designated for anticorrosion protection in the Protective
segment. They are produced in most of Hempel’s plants and are widely available. Paints for other
purposes, products unique to the assortment of individual production plants, and custom coatings are
not included here. To obtain detailed information, specifications and pricing for a particular project,
please contact your local Hempel representative or the nearest Hempel office shown on the back
cover of this publication.
Alkyds
Product
Description
Recommended use
Finish Colours/
shade nos.
Volume
solids, %
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPALIN PRIMER
12050
HEMPALIN PRIMER 12050 is
a relatively quick-drying, zinc
phosphate primer, based on
long oil alkyd and urethane
alkyd.
General purpose primer for
HEMPALIN systems for protection
of steel in mild to medium atmospheric corrosive environments.
Flat
Green/40760
-Red/50410
49 ± 1
40 micron
12.3 m²/litre
415 g/litre
min. Sa 2
08230
HEMPAQUICK PRIMER
13624
HEMPAQUICK PRIMER 13624
is a very quick-drying zinc phosphate pigmented alkyd primer.
As a rust preventing primer on
steel, machinery parts, etc. where
quick drying is needed, both as
a workshop primer for temporary
protection and as a general purpose primer in fast drying alkyd-based systems for protection of steel
in mild to medium atmospheric
corrosive environments.
Flat
Light grey/
12170 Red/50710
47 ± 1
80 micron
5.9 m2/litre
480 g/litre
min. Sa 2
08080
HEMPEL'S SILVIUM
51570
HEMPEL'S SILVIUM 51570
is an oleoresinous general
purpose aluminium paint with
good light reflection.
Glossy
As a finishing coat on steel and
Aluminium/
woodwork exterior and interior
in a mild to moderately corrosive 19000
environment where an aluminium
surface or light reflection is
desired, and/or for moderately
hot surfaces.
38 ± 1
25 micron
15.2 m²/litre
505 g/litre
Sa 2/ St 3
Do not
dilute.
HEMPALIN ENAMEL
52140
HEMPALIN ENAMEL 52140 is
a glossy alkyd enamel which
forms a weather resistant coating. It is flexible and resistant
to salt water and spillage of
mineral oil and other aliphatic
hydrocarbons.
As a general purpose finishing
coat in alkyd systems on exterior
and interior steel and woodwork
in a mildly to moderately corrosive
environment. As a finishing coat
in engine rooms including tank
tops, main engines and auxiliary
machinery.
Glossy
White/10000*
Black/19990*
46 ± 1
30 micron
15.3 m²/litre
14.3 m²/litre
430 g/litre
455 g/litre
Application for
clean and dry
surface.
08230
HEMPALIN DECKPAINT
53370
HEMPALIN DECKPAINT 53370
NON-SKID is an alkyd paint containing an antislip aggregate.
It is quick drying, hard-wearing
and resistant to sunlight, salt
water and oil splashes, but not
to aromatic hydrocarbons.
As a skid-proof finishing coat
on steel decks, stairways, footbridges, indoors and outdoors, in
a mildly to moderately corrosive
marine environment.
Flat
Green/40640*
Red/50630*
43 ± 1
30 micron
14.3 m²/litre
476 g/litre
479 g/litre
Application for
clean and dry
surface.
08080
HEMPAQUICK ENAMEL
53840
HEMPAQUICK ENAMEL 53840
is a quick drying alkyd enamel
with good gloss and colour
retention
Glossy
As a topcoat on steel in a mild
White/10000*
to moderately corrosive environment. In case of line application of
small items to be packed together,
HEMPALIN ENAMEL 52140 or
HEMPALIN DECK PAINT 53240 is
recommended.
40 ± 1
10.0 m²/litre
545 g/litre
Application for
clean and dry
surface.
08080
Product
Description
Recommended use
FinishColours/
shade nos.
Volume
solids, %
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPATEX HI-BUILD
46410
HEMPATEX HI-BUILD 46410
is physically drying high build
paint with good colour retention
as a flat finish. Based on acrylic
resin and non-chlorinated plasticiser. Contains zinc phosphate.
Resistant to salt water, splashes
of aliphatic hydrocarbons,
animal and vegetable oils.
1. As a primer, intermediate or
finishing coat in HEMPATEXsystems in a moderately corrosive
environment.
2. As a selfprimed repair and
touch-up coating for containers
as well as other cases where a
fast and economic repair job is
desired.
3. As a finishing coat for
containers.
Flat
Grey/11480*
Red/50630*
42 ± 1
100 micron
4.2 m2/litre
515 g/litre
Sa 2½
08080
HEMPEL'S PRO
ARCYLIC 55880
HEMPEL'S PRO ACRYLIC 55880
is a two-component, isocyanatefree, acrylic finishing coat with
good gloss and colour retention.
It is resistant to water and spillage of aliphatic hydrocarbons.
Minimum curing temperature is
0°C/32°F.
As a finishing coat for protection
of structural steel in a severely
corrosive environment, where
light-fastness and gloss retention
are required.
Glossy
White/10000*
60 ± 1
50 micron
12.0 m²/litre
380 g/litre
Application for
clean and dry
surface.
08450
Acrylics
Issued: October 2011
Acrylics
Product
Description
Recommended use
FinishColours/
shade nos.
Volume
solids, %
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPATEX ENAMEL
56360
HEMPATEX ENAMEL 56360 is
a finishing coat based on acrylic
resin and nonchlorinated plasticiser for optimum gloss and colour retention. Physically drying.
Resistant to salt water, splashes
of aliphatic hydrocarbons and
animal and vegetable oils.
As an interior and exterior
finishing coat in HEMPATEX
systems in a moderately to
severely corrosive environment.
Semi-gloss
Black/19990*
Orange/50040*
31 ± 1
33 ± 1
35 micron
8.9 m²/litre
9.4 m²/litre
615 g/litre
595 g/litre
Application for
clean and dry
surface.
08080
HEMUCRYL PRIMER
HI-BUILD 18032
HEMUCRYL PRIMER HI-BUILD
18032 is a water-borne,
acrylic dispersion paint with
good anticorrosive properties.
Especially suited for application
by airless spray.
As a primer in water-borne paint
systems on interior and exterior
steelwork in a mildly to moderately corrosive environment.
May also be used as a primer in
water-borne paint systems on hot
dip galvanised steel, aluminium,
and stainless steel in a mildly
corrosive environment.
Flat
Grey/12170 Red/50710
43 ± 1
75 micron
5.7 m²/litre
45 g/litre
Sa 2½
Fresh
water
HEMUCRYL ENAMEL
HI-BUILD 58030
HEMUCRYL ENAMEL HI-BUILD
58030 is a water-borne, acrylic
dispersion based paint. It dries
to a non-yellowing and glossy
coating with low dirt pick-up,
good weathering properties,
and high gloss retention.
Especially suited for application
by airless spray.
As a glossy, finishing coat in water- Glossy
borne paint systems, interior and White/10000*
exterior, in moderately to severely
corrosive environments. For
use on buildings; the relatively
high resistance to diffusion of
water vapour and carbon dioxide
should be taken into account.
For handrails and the similar,
a chemically curing coating is
recommended as an alternative.
44 ± 1
75 micron
5.9 m²/litre
5 g/litre
Application for
clean and dry
surface.
Fresh
water
Product
Description
Recommended use
FinishColours/
shade nos.
Volume
solids, %
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPADUR UNIQ
4774A
HEMPADUR UNIQ 4774A is a
self-priming, two-component,
high-build, pure epoxy paint, polyamide/amine cured. Abrasion
and corrosion resistant.
As a universal primer or self
primed, high performance coating
system for wind turbine towers
and wind turbine components.
Semi-gloss
Cream/20450 Grey/11150
76 ± 1
150 micron
5.1 m²/litre
240 g/litre
Sa 2½, St 3
08450
HEMPADUR 1555E
HEMPADUR 1555E is a
two-component polyamide
adduct-cured epoxy paint. It
cures to a flexible, well adhering
coating with good abrasion and
impact resistance. Contains
zinc phosphate. Cures down to
-10°C/14°F. Approved to UK
Highways Agency item 110 &
Network Rail items 7.1.2.
As a general purpose primer for
HEMPATEX, HEMPADUR and
HEMPATHANE systems on steel.
May also be used as primer for
hot dipped galvanised surfaces,
aluminium and stainless steel.
Flat
Light
Beige/22430
40 ± 1
40 micron
10.0 m²/litre
530 g/litre
Sa 2½
08450
HEMPADUR 15130
HEMPADUR 15130 is a twocomponent, polyamide cured
coal tar epoxy which provides
a very hardwearing coating,
highly resistant to seawater
and mineral oils. Limited resistance to a number of solvents.
Aliphatic hydrocarbons may be
discoloured.
Semi-gloss
As a self-priming coating system
Black/19990
for long-term protection of steel
and concrete in a severely corrosi- Brown/60430
ve environment. It provides excellent protection as a lining in crude
and fuel oil tanks. If the exposure
is acidic or a temperature gradient
is developed, it is recommended
to use HEMPADUR 15100. For
application at lower temperatures, i.e. in the interval from
-10°C/14°F to +10°C/50°F, it is
recommended to use HEMPADUR
LTC 15030.
70 ± 1
125 micron
5.6 m²/litre
295 g/litre
300 g/litre
Sa 2½
08450
HEMPEL'S
SHOPPRIMER E 15280
HEMPEL’S SHOPPRIMER
E 15280 is a two-component
epoxy polyamide primer,
pigmented with zincphosphate
rust-inhibiting pigments. It is
designed for automatic spray
application as well as manual
application.
As a shopprimer for protection
of blast cleaned steel plate and
other structural steel during the
storage and building period.
22 ± 1
20-25 micron
10.5 m²/litre
640 g/litre
Sa 2½
08570
HEMPADUR PRIMER
15300
HEMPADUR PRIMER 15300 is
a two-component polyamidecured epoxy primer containing
zinc phosphate as corrosion
inhibiting pigment. It cures to
a strong and rust-preventing
coating.
As a primer or intermediate
Flat
coat in container systems. May
Red/50890 be used as a general purpose
Grey/12170
epoxy primer according to painting
specification.
51 ± 1
40 micron
12.8 m2/litre
445 g/litre
Sa 2½
08450
Epoxy
Issued: October 2011
Flat
Red/50890
Epoxy
Product
Description
Recommended use
FinishColours/
shade nos.
Volume
solids, %
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPADUR 15553
HEMPADUR 15553 is a
two-component polyamide
adduct-cured epoxy paint. It
cures to a flexible, well adhering
coating with good abrasion and
impact resistance. Contains
zinc phosphate. Cures down to
-10°C/14°F.
Flat
As a primer for HEMPATEX,
Off-white/11630
HEMPADUR and HEMPATHANE
systems on hot dipped galvanised
surfaces, aluminium and stainless
steel in moderately corrosive environments. HEMPADUR 15553
is also suited when roughening of
the surface is not possible. Please
see surface preparation overleaf.
55 ± 1
50 micron
11.0 m²/litre
400 g/litre
Application for
clean and dry
surface.
8450
HEMPADUR FAST DRY
15560
HEMPADUR FAST DRY 15560
is a two-component, polyamine
adduct cured epoxy paint with a
very short drying time. Contains
zinc phosphate.
As a quick drying primer or
intermediate coat in HEMPADUR
systems for especially fast
recoatable in-shop applications.
Can be used for on-site work too if
VOC compliance is requested.
62 ± 1
Flat
Grey 12170 - Reddish grey/12430*
*Another shade:
red 50630 may
be available
according to assortment list.
100 micron
6.2 m²/litre
330 g/litre Sa 2½
(According
to EPA Fed
Ref Method
24)
355 g/litre
08450
HEMPADUR 15570
HEMPADUR 15570 is a two
component, polyamide-adduct
cured epoxy paint, which cures
to a strong and highly corrosion
resistant coating, at temperatures down to -10°C/14°F.
The Micaceous Iron Oxide pigmented light grey 12430 quality
is also well suited for application under humid conditions, on
damp steel surfaces, and may
be applied on moist surfaces.
Network Rail items 5.1.7.
1. As a maintenance and repair
primer, intermediate, and/or
finishing coat in HEMPADUR
systems in a severely corrosive
environment. As a finishing coat
where a cosmetic appearance is
of less importance.
2. As a low temperature curing
epoxy primer, intermediate, and/
or finishing coat in paint systems
according to specification. Well
suited as a (blast) primer in coal
tar epoxy systems.
3. Mist coat on GALVOSIL.
Flat
Reddish
grey/12430*
(MI0)
Red/50630*
*Another shade:
grey 12170 may
be available
according to assortment list.
54 ± 1
55 ± 1
100 micron
5.4 m2/litre
5.5 m2/litre
420 g/litre
415 g/litre
Sa 2½
08450
HEMPADUR ZINC
17320
HEMPADUR ZINC 17320 is
a two-component, zinc rich
epoxy primer. It cures to a hard
wearing and highly weather-resistant coating. Offers cathodic
protection of local mechanical
damage.
As a versatile, long-term primer
Flat
on steel for epoxy, vinyl and acrylic Red-grey/19830
coating systems in medium to
severely corrosive environments.
61 ± 1
50 micron
12.2 m²/litre
365 g/litre
Sa 2½
08450
HEMPADUR ZINC
17340
HEMPADUR ZINC 17340 is a
two-component zinc rich epoxy
paint. It cures to a strong and
corrosion resistant coating.
1. As a "V.O.C. compliant" primer
on steel in a medium to severely
corrosive environment. May be
applied on zinc-shopprimed steel,
where damaged spots,welds etc.
have been power tool cleaned.
2. For on-line application on
containers. In compliance with
SSPC-Paint 20, type 2, level 3.
Semi-flat
Red-grey/19830
66 ± 1
50 micron
13.2 m²/litre
330 g/litre
Sa 2½
08450
HEMPADUR ZINC
17360
HEMPADUR ZINC 17360 is
a two-component, zinc rich
epoxy primer. It cures to a hard
wearing and highly weatherresistant coating. Offers
cathodic protection of local
mechanical damage. Network
Rail items 7.1.3.
As a "V.O.C.-compliant", versatile,
long-term primer on steel for
epoxy, vinyl and acrylic coating
systems in medium to severely
corrosive environments. In compliance with SSPC-Paint 20, type 2,
level 2 and ISO 12944-5.
Flat
Red-grey/19830
65 ± 1
50 micron
13.0 m²/litre
345 g/litre
Sa 2½
08450
HEMAPDUR FAST DRY
17410
HEMPADUR FAST DRY 17410
is a two-component, high build
epoxy paint which combines
a relatively high volume solids
content with a short drying
time. Contains zinc phosphate.
As a quick drying primer or
intermediate coat in HEMPADUR
systems, for shop and site applications.
Semi-gloss
Grey/11480
- Reddish
Grey/12430 (MIO
version)
74 ± 1
100 micron
7.4 m2/litre
238 g/litre
Sa 2½
Depending on
purpose
usually
less
than 5%
THINNER
08450.
HEMPADUR QUATTRO
17634
HEMPADUR QUATTRO 17634
is a two-component universal
epoxy paint, which cures to a
hard and tough coating with
good resistance to abrasion,
seawater and various oils.
As a universal epoxy and selfprimed high performance coating
system for atmospheric or in-water service, including water ballast
tanks to be coated according to
IMO-PSPC requirements (Resolution MSC.215(82)). HEMPADUR
QUATTRO 17634 is intended
for all year application down to
-10°C/14°F and for in-shop
applications where fast recoating
and handling is required.
Semi-flat
Red/50630*
* other shades
according to assortment list.
72 ± 1
125 micron
5.8 m2/litre
275 g/litre
Sa 2½
08450
HEMAPDUR
MULTI-STRENGTH GF
35870
HEMPADUR MULTI-STRENGTH
GF 35870 is an amine-adduct
cured epoxy coating - the product is reinforced with Glassflakes.
It is a hard, impact and abrasion
resistant coating with good
resistance to sea water, mineral
oils, aliphatic hydrocarbons and
splashes from petrol and related
products. Suitable for early water
exposure and will continue to
cure under water. Network Rail
items 7.2.3.
As a self-primed, high build
Glossy
coating primarily for areas subject Black/19990
to abrasion and/or to a highly
corrosive environment. E.g. splash
zones, jetty pilings and working
decks. Can be used as interior
lining for crude oil and fuel oil
storage tanks.
87 ± 1
350 microns
2.5 m2/litre
180 g/litre
Sa 2½
08450
Issued: October 2011
Epoxy
Product
Description
Recommended use
FinishColours/
shade nos.
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPADUR 45141/3
HEMPADUR 45141/45143 is a
two-component, polyamide adduct cured epoxy paint with good
wetting properties and low water
permeability. It is selfpriming and
forms a hard and tough coating
which has good resistance
against abrasion and impact
as well as to seawater, mineral
oils, aliphatic hydrocarbons and
splashes from petrol and related
products. Harmless to grain
cargoes.
1. As a high build primer, intermediate and/or finishing coat in (heavy duty) paint systems according
to specification. (As a finishing
coat where a cosmetic appearance is of less importance).
2. For repair and maintenance
work at application temperatures
above -10°C/15°F on hatch
covers, decks, in cargo holds, etc.
3. As a ballast tank coating. HEMPADUR 45143 is intended for
use in cold/temperate climates,
HEMPADUR 45141 for warmer
climates .
60 ± 1
Semi-gloss
Red/50630*
*Other shades
including a MIO
version, colour no.
12430, according
to assortment list.
150 micron
4.0 m²/litre
380 g/litre
Sa 2½
08450
HEMAPDUR FAST DRY
45410
HEMPADUR FAST DRY 45410
is a two-component, high solid
epoxy paint. Pigmented with
zinc phosphate.
As a fast curing topcoat in a mild
to severely corrosive environment.
As one coat direct to metal in a
mild corrosive environment. As a
topcoat where the usual cosmetic
performance of epoxy coatings is
acceptable.
Semi-flat
Grey/12170*
*Another shade
grey 11480
according to assortment list.
65 ± 1
80 micron
8.1 m²/litre
330 g/litre
Sa 2½
08450
HEMPADUR
MULTI-STRENGTH
45751
HEMPADUR MULTI-STRENGTH
45751/45753 is a self-priming,
two-component, highbuild,
epoxy-polyamide/amine paint
which cures to an abrasion and
corrosion resistant coating.
As a heavy duty coating for areas
exposed to abrasion and aggressive
corrosive climates such as ramps,
ship hulls and holds of bulk carriers.
As a ballast tank coating for special
purposes such as chemical carriers;
carrying hot cargoes and other
purposes where “pure epoxy coating”
is requested. As a finishing coat
where a cosmetic appearance is of
less importance.
Semi-gloss
79 ± 1
200 micron
4.0 m²/litr
260 g/litre
min. Sa 2½
08450
HEMPADUR MASTIC
4588W
HEMPADUR MASTIC 4588W is
a two-component high solids,
high build epoxy paint. It forms
a hard and tough coating, has
good wetting properties and low
temperature curing.
As a selfprimed paint system or as Semi-gloss
an intermediate coat in heavy duty Grey/12170
paint systemsfor atmospheric
exposure, where low VOC and high
film build are required.Especially
suited for application at low temperatures (down to -10°C/15°F)
and where arelatively short
recoating interval is required (one
day, one coat).
80 ± 1
200 micron
4.0 m²/litre
200 g/litre
min. St 2 , min.
Sa 2, preferably
to Sa 2½.
Depending on
purpose
usually
less
than 5%
THINNER
08450.
HEMPADUR MASTIC
45880/1
HEMPADUR MASTIC
45880/45881 is a twocomponent polyamide adduct
cured, high solids, high build
epoxy paint. It forms a hard and
tough coating, has good wetting
properties and low temperature
curing. Network Rail items
7.2.2.
As a selfprimed, surface tolerant
Semi-gloss
paint system or as an intermediate
Grey/12170*
or finishing coat in heavy duty paint
systems where low VOC and high
film build are required. Multipurpose coating as per specification for
maintenance and minor repairs in immersed areas including ballast tanks
and underwater hull. Specifically in
those cases where a need for fewer
products outweighs more specialised
coatings. Can be specified where
extended recoating properties for
polyurethane topcoats are requested
(typically travel coating). May be used
directly on cured zinc silicate (GALVOSIL products) or spray-metallised
surfaces to minimise popping. As
a topcoat where the usual outdoor
cosmetic appearance of epoxy paints
is acceptable.
80 ± 1
200 micron
4.0 m2/litre
220 g/litre
min. St 2, min.
Sa 2 preferably
to Sa 21/2
Depending on
purpose
usually
less
than 5%
THINNER
08450.
HEMPADUR 47140
HEMPADUR 47140 is a twocomponent polyamide adducts
cured, high build epoxy paint
which combines a relatively
high volume solids content with
a short drying time. VOC
compliant.
As a primer in mild to medium
atmospheric environments. As an
intermediate or finishing coat in epoxy
systems in medium to severely corrosive atmospheric environments. As
a finishing coat where the usual outdoor cosmetic appearance of epoxy
paints is acceptable. May be used
directly on cured zinc silicate (GALVOSIL products) or spray-metallised
surfaces to minimise popping.
Semi-gloss
70 ± 1
Cream/20450
(RAL 9001) - Light
grey/11150 (RAL
7035)
125 micron
5.6 m²/litre
300 g/litre
Application for
clean and dry
surface.
Depending on
purpose
usually
less
than 5%
THINNER
08450.
HEMPADUR ZP 47940
HEMPADUR ZP 47940 is a twocomponent polyamide adduct
cured, high build epoxy paint
which combines a relatively
high volume solids content with
a short drying time. Pigmented
with zincphosphate. Approved to
UK Highways Agency item 111.
As a primer in epoxy systems in
atmospheric exposure.
Semi-gloss
Grey/12170 Red/50630
125 micron
6.1 m²/litre
245 g/litre
Sa 2½
Depending on
purpose
usually
less
than 5%
THINNER
08450.
Issued: October 2011
Volume
solids, %
76 ± 1
Epoxy
Product
Description
Recommended use
FinishColours/
shade nos.
HEMPADUR MIO
47950
HEMPADUR MIO 47950 is
a two-component polyamide
adduct cured, high build epoxy
paint which combines a relatively high volume solids content
with a short drying time. Has
a high load of MIO-pigment.
Approved to UK Highways
Agency item 112. Network Rail
items 7.2.2.
As an intermediate or finishing
coat in epoxy systems in atmospheric exposure.
HEMPADUR 47960
HEMPADUR 47960 is a twocomponent polyamide adducts
cured, high build epoxy paint
which combines a relatively
high volume solids content with
a short drying time. VOC
compliant. Prolonged recoating
properties. Pigmented with zinc
phosphate. Network Rail items
7.1.4.
As a primer in mild to medium
atmospheric environments.As
an intermediate or finishing coat
in epoxy systems in medium to
severely corrosiveatmospheric
environments.As a one coat self
priming epoxy topcoat available
in various shades.May be used
directly on cured zinc silicate
(GALVOSIL products) or spraymetallisedsurfaces to minimise
popping.
Semi-gloss
Grey/11480 Red/50710*)
*)Other shades
according to assortment list.
HEMPADUR 85671
HEMPADUR 85671 is a twocomponent, amine adduct
cured phenolic epoxy (novolac)
coating with very good adhesion
and high temperature, water
and chemical resistance.
As an interior lining in tanks,
pipelines etc. for hot water, brine,
crude oil, etc. For coating of potable water tanks. As a primer coat
in specific painting systems.
HEMPADUR MASTIC
8588E
HEMUDUR 18500
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
Semi-gloss
76 ± 1
MIO grey/12130 grey/13480
125 micron
6.1 m²/litre
245 g/litre
Application for
clean and dry
surface.
Depending on
purpose
usually
less
than 5%
THINNER
08450.
75 ± 1
125 micron
6.0 m²/litre
250 g/litre
Application for
clean and dry
surface.
Depending on
purpose
usually
less than
5%
THINNER
08450.
Flat
68 ± 1
Off-white/11630 Light red/50900
100 micron
6.8 m²/litre
316 g/litre
Sa 2½-3
08450
HEMPADUR MASTIC 8588E is
a two-component polyamide
adduct cured, high solids,
high build epoxy paint. It
forms a hard and tough
coating, has good wetting
properties and low temperature curing. Approved to UK
Highways Agency item
115 / 116
Grey/17050
77 ± 1
As a selfprimed, surface tolerant
Aluminium/19910
paint system or as an intermediate or finishing coat in
heavy duty paint systems where
low VOC and high film build are
required. Multipurpose coating
as per specification for maintenance including ballast tanks
andunderwater hull and new steel
in those cases, where a need for
few products outweighs more
specialised coatings.
200 micron
16.3 m²/litre
220 g/litre
Sa 2½.
Depending on
purpose
usually
less than
5%
THINNER
08450.
HEMUDUR 18500 is a
water-borne two-component
polyamine cured epoxy primer
containing corrosive inhibiting
pigment. It cures to a strong
and rust-preventing coat.
In mildly to moderately corrosive
environments as a general purpose primer on steel constructions
(see REMARKS overleaf).
51 ± 1
75 micron
6.8 m²/litre
20 g/litre
Sa 2½
Fresh
water
Flat
In moderately to severely
atmospheric exposure as an anti- Grey/19840
corrosive primer for waterborne
paint systems. In compliance with
SSPC-Paint 20, type 2, level 1 and
ISO 12944-5.
51 ± 1
50 micron
10.2 m²/litre
10 g/litre
Sa 2½
Fresh
water
Recommended use
FinishColours/
shade nos.
Volume
solids, %
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPATHANE TOPCOAT HEMPATHANE TOPCOAT
55210
55210 is a two-component,
glossy acrylic polyurethane
coating, cured with aliphatic
isocyanate, with good gloss
and colour retention.
As a finishing coat for protection
of structural steel in severely corrosive atmospheric environments,
where light-fastness and gloss
retention are required.
Glossy
White/10000 Blue/30840*
51 ± 1
50 micron
10.2 m2/litre
445 g/litre
Application for
clean and dry
surface.
08080
HEMPATHANE HS
55610
HEMPATHANE HS 55610 is a
two-component polyurethane
topcoat, cured with aliphatic
isocyanate, with good gloss
and colour retention. Contains zinc phosphate. Network
Rail items 7.3.1.
As a VOC-compliant, high-build
finishing coat for protection
of structural steel in corrosive
environments.
Glossy
White/10000*
65 ± 1
100 micron
6.5 m2/litre
330 g/litre
Application for
clean and dry
surface.
08080
HEMPATHANE HS
55810
HEMPATHANE HS 55810 is a
two-component polyurethane
topcoat, cured with aliphatic
isocyanate, with very good
gloss and colour retention.
Network Rail items 7.3.1.
As a low VOC finishing coat for
protection of structural steel in
severely corrosive
atmospheric environment.
Light
Grey/12170*
65 ± 1
40 micron
16.3 m²/litre
335 g/litre
Application for
clean and dry
surface.
08880
HEMUDUR ZINC 18560 HEMUDUR ZINC 18560 is a
three-component, water-borne,
zinc rich epoxy primer. It cures to
a strong and anticorrosive coating
that offers cathodic protection of
local mechanical damage.
Semi-flat
Grey/12170 Red/51320
Volume
solids, %
Polyurethane
Product
Description
Issued: October 2011
Silicone
Product
Description
Recommended use
FinishColours/
shade nos.
Volume
solids, %
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPEL'S SILICONE
ALUMINIUM 56910
HEMPEL’S SILICONE
ALUMINIUM 56910 is a heat
resistant aluminium pigmented polysiloxane paint.
For long-term protection of hot
pipelines, exhaust pipes, smoke
stacks and other hotsurfaces.
In a corrosive environment see
PRECEDING COAT overleaf.
Semi-flat
Aluminium
/19000
35 ± 1
25 micron
14.0 m²/litre
585 g/litre
Sa 2½
08080
Product
Description
Recommended use
FinishColours/
shade nos.
Volume
solids, %
Film thickness
(DFT)
Theoretical
spreading rate
V.O.C
Surface
preparation
Thinner
HEMPEL'S GALVOSIL
15700
HEMPEL’S GALVOSIL 15700
is a two-component, solventborne, self-curing, inorganic
zinc silicate with outstanding
resistance against weathering
and abrasion. It has excellent
chemical resistance within
the pH range 6-9. For service
temperature range, see below.
Applicable by airless spray. Offers cathodic protection of local
mechanical damage.
1. As a general purpose, heavyduty, rust-preventing primer.
2. As a single, complete coating
for long-term protection of steel
exposed to moderately to severely
corrosive environments and to
abrasion.
3. As a tank lining in accordance
with the CARGO PROTECTION
GUIDE.In compliance with SSPCPaint 20, type 1, level 1 and ISO
12944-5.
Flat
Metal
grey/19840
64 ± 1
50 micron
12.8 m²/litre
434 g/litre
min. Sa 2½
08700
HEMPEL'S
SHOPPRIMER
ZS 15890
HEMPEL’S SHOPPRIMER ZS
15890 is a two-component,
solvent-borne zinc ethyl
silicate shopprimer,
designed for automatic spray
application. Especially suited,
where welding (MIG/MAG)
and gas-cutting properties
are of importance.
For short to medium-term
protection of abrasive blast
cleaned steel plates and other
structural steel during the storage,
fabrication, and construction
periods.
Flat
Reddish
grey/19890 Grey/19840
28 ± 1
15 micron
18.7 m²/litre
620 g/litre
min. Sa 2½
08570 or
08700
Zinc-Si
*Wide range of colours available via Hempel's MULTI-TINT system.
Note: The data, specifications and recommendations provided in this overview of Hempel’s most frequently used protective paints are obtained
from individual product data sheets. This is a summary only, not complete information and is subject to change. Therefore, it is exclusively the
responsibility of the user to obtain accurate, complete and appropriate information in relation to any particular intended use of these and other
Hempel products. Unless expressly agreed otherwise in writing, the products are supplied and all technical assistance is provided subject to
Hempel’s general terms and conditions of sale, delivery and service. Except as expressed in said general terms and conditions, the manufacturer
and seller waive all claims involving any liability, including but not limited to negligence, for all results, injury, or direct or indirect losses or damages
arising from the use of the products as recommended above or otherwise. Product data are subject to change without notice and in any case should
no longer be regarded as authoritative three years from the date of this information’s issue.
Issued: October 2011
Corporate Colour Equivalents
RAL K-5
RAL
RAL 1000
RAL 1001
RAL 1002
RAL 1003
RAL 1004
RAL 1005
RAL 1006
RAL 1007
RAL 1011
RAL 1012
RAL 1013
RAL 1014
RAL 1015
RAL 1016
RAL 1017
RAL 1018
RAL 1019
RAL 1020
RAL 1021
RAL 1023
RAL 1024
RAL 1026
RAL 1027
RAL 1028
RAL 1032
RAL 1033
RAL 1034
RAL 1035
RAL 1037
RAL 2000
RAL 2001
RAL 2002
RAL 2003
RAL 2004
RAL 2005
RAL 2007
RAL 2008
RAL 2009
RAL 2010
RAL 2011
RAL 2012
RAL 2013
RAL 3000
RAL 3001
RAL 3002
RAL 3003
RAL 3004
RAL 3005
RAL 3007
RAL 3009
RAL 3011
RAL 3012
RAL 3013
RAL 3014
RAL 3015
RAL 3016
RAL 3017
RAL 3018
RAL 3020
RAL 3022
RAL 3024
RAL 3026
RAL 3027
RAL 3031
RAL 4001
RAL 4002
RAL 4003
Hempel Colour
22500
24900
20470
27030
27040
27050
20820
27070
27110
23120
17130
20420
27150
27160
27170
27180
27190
27200
20250
27230
27240
27260
27270
27280
27320
27330
27340
19350
27370
22120
50060
57020
57030
50190
50180
57070
57080
57090
57100
57110
57120
59130
50170
57150
50740
51710
50100
51800
57370
53090
57310
57320
57330
57340
57350
57460
57470
57480
57200
57520
57540
50090
57570
57410
37010
57620
57630
RAL
RAL 4004
RAL 4005
RAL 4006
RAL 4007
RAL 4008
RAL 4009
RAL 4010
RAL 4012
RAL 5000
RAL 5001
RAL 5002
RAL 5003
RAL 5004
RAL 5005
RAL 5007
RAL 5008
RAL 5009
RAL 5010
RAL 5011
RAL 5012
RAL 5013
RAL 5014
RAL 5015
RAL 5017
RAL 5018
RAL 5019
RAL 5020
RAL 5021
RAL 5022
RAL 5023
RAL 5024
RAL 6000
RAL 6001
RAL 6002
RAL 6003
RAL 6004
RAL 6005
RAL 6006
RAL 6007
RAL 6008
RAL 6009
RAL 6010
RAL 6011
RAL 6012
RAL 6013
RAL 6014
RAL 6015
RAL 6016
RAL 6017
RAL 6018
RAL 6019
RAL 6020
RAL 6021
RAL 6022
RAL 6024
RAL 6025
RAL 6026
RAL 6027
RAL 6028
RAL 6029
RAL 6032
RAL 6033
RAL 6034
RAL 7000
RAL 7001
RAL 7002
RAL 7003
Hempel Colour
57640
37050
57660
57670
57680
57690
57700
38120
37000
37020
30170
37030
37040
37150
30570
32080
32090
30180
37110
35120
33930
37140
37240
37170
45180
30350
45200
40210
37220
37230
37440
46000
40050
47020
47030
41490
47050
47060
47070
47080
47090
40220
40840
47120
41130
47140
47150
47160
42600
42170
49500
47200
47210
47220
47240
47250
47260
47270
47280
47290
47320
47330
47340
10390
10400
17020
17030
RAL
RAL 7004
RAL 7005
RAL 7006
RAL 7008
RAL 7009
RAL 7010
RAL 7011
RAL 7012
RAL 7013
RAL 7015
RAL 7016
RAL 7021
RAL 7022
RAL 7023
RAL 7024
RAL 7026
RAL 7030
RAL 7031
RAL 7032
RAL 7033
RAL 7034
RAL 7035
RAL 7036
RAL 7037
RAL 7038
RAL 7039
RAL 7040
RAL 7042
RAL 7043
RAL 7044
RAL 7045
RAL 7046
RAL 7047
RAL 7048
RAL 8000
RAL 8001
RAL 8002
RAL 8003
RAL 8004
RAL 8007
RAL 8008
RAL 8011
RAL 8012
RAL 8014
RAL 8015
RAL 8016
RAL 8017
RAL 8019
RAL 8022
RAL 8023
RAL 8024
RAL 8025
RAL 8028
RAL 9001
RAL 9002
RAL 9003
RAL 9004
RAL 9005
RAL 9006
RAL 9007
RAL 9010
RAL 9011
RAL 9016
RAL 9017
RAL 9018
RAL 9022
RAL 9023
Hempel Colour
17160
17040
17060
17080
17100
17110
17120
10270
17530
10380
10520
17210
17220
13230
17240
17260
17300
17310
11320
17330
17340
11150
11730
11370
17380
17390
17700
17720
17730
17740
17750
17860
17770
17480
67000
67010
67020
67030
61810
67070
67080
67110
67120
67140
67150
60160
67170
60180
67220
67230
67240
67250
67280
20450
17620
17630
17940
19990
19000
19870
10170
17910
17760
17970
17980
19360
19230
Tilsvarende Hempel kulør.
RAL K-5
RAL
RAL 1000
RAL 1001
RAL 1002
RAL 1003
RAL 1004
RAL 1005
RAL 1006
RAL 1007
RAL 1011
RAL 1012
RAL 1013
RAL 1014
RAL 1015
RAL 1016
RAL 1017
RAL 1018
RAL 1019
RAL 1020
RAL 1021
RAL 1023
RAL 1024
RAL 1026
RAL 1027
RAL 1028
RAL 1032
RAL 1033
RAL 1034
RAL 1035
RAL 1037
RAL 2000
RAL 2001
RAL 2002
RAL 2003
RAL 2004
RAL 2005
RAL 2007
RAL 2008
RAL 2009
RAL 2010
RAL 2011
RAL 2012
RAL 2013
RAL 3000
RAL 3001
RAL 3002
RAL 3003
RAL 3004
RAL 3005
RAL 3007
RAL 3009
RAL 3011
RAL 3012
RAL 3013
RAL 3014
RAL 3015
RAL 3016
RAL 3017
RAL 3018
RAL 3020
RAL 3022
RAL 3024
RAL 3026
RAL 3027
RAL 3031
RAL 4001
RAL 4002
RAL 4003
Hempel kulør
22500
24900
20470
27030
27040
27050
20820
27070
27110
23120
17130
20420
27150
27160
27170
27180
27190
27200
20250
27230
27240
27260
27270
27280
27320
27330
27340
19350
27370
22120
50060
57020
57030
50190
50180
57070
57080
57090
57100
57110
57120
59130
50170
57150
50740
51710
50100
51800
57370
53090
57310
57320
57330
57340
57350
57460
57470
57480
57200
57520
57540
50090
57570
57410
37010
57620
57630
RAL
RAL 4004
RAL 4005
RAL 4006
RAL 4007
RAL 4008
RAL 4009
RAL 4010
RAL 4012
RAL 5000
RAL 5001
RAL 5002
RAL 5003
RAL 5004
RAL 5005
RAL 5007
RAL 5008
RAL 5009
RAL 5010
RAL 5011
RAL 5012
RAL 5013
RAL 5014
RAL 5015
RAL 5017
RAL 5018
RAL 5019
RAL 5020
RAL 5021
RAL 5022
RAL 5023
RAL 5024
RAL 6000
RAL 6001
RAL 6002
RAL 6003
RAL 6004
RAL 6005
RAL 6006
RAL 6007
RAL 6008
RAL 6009
RAL 6010
RAL 6011
RAL 6012
RAL 6013
RAL 6014
RAL 6015
RAL 6016
RAL 6017
RAL 6018
RAL 6019
RAL 6020
RAL 6021
RAL 6022
RAL 6024
RAL 6025
RAL 6026
RAL 6027
RAL 6028
RAL 6029
RAL 6032
RAL 6033
RAL 6034
RAL 7000
RAL 7001
RAL 7002
RAL 7003
Hempel kulør
57640
37050
57660
57670
57680
57690
57700
38120
37000
37020
30170
37030
37040
37150
30570
32080
32090
30180
37110
35120
33930
37140
37240
37170
45180
30350
45200
40210
37220
37230
37440
46000
40050
47020
47030
41490
47050
47060
47070
47080
47090
40220
40840
47120
41130
47140
47150
47160
42600
42170
49500
47200
47210
47220
47240
47250
47260
47270
47280
47290
47320
47330
47340
10390
10400
17020
17030
RAL
RAL 7004
RAL 7005
RAL 7006
RAL 7008
RAL 7009
RAL 7010
RAL 7011
RAL 7012
RAL 7013
RAL 7015
RAL 7016
RAL 7021
RAL 7022
RAL 7023
RAL 7024
RAL 7026
RAL 7030
RAL 7031
RAL 7032
RAL 7033
RAL 7034
RAL 7035
RAL 7036
RAL 7037
RAL 7038
RAL 7039
RAL 7040
RAL 7042
RAL 7043
RAL 7044
RAL 7045
RAL 7046
RAL 7047
RAL 7048
RAL 8000
RAL 8001
RAL 8002
RAL 8003
RAL 8004
RAL 8007
RAL 8008
RAL 8011
RAL 8012
RAL 8014
RAL 8015
RAL 8016
RAL 8017
RAL 8019
RAL 8022
RAL 8023
RAL 8024
RAL 8025
RAL 8028
RAL 9001
RAL 9002
RAL 9003
RAL 9004
RAL 9005
RAL 9006
RAL 9007
RAL 9010
RAL 9011
RAL 9016
RAL 9017
RAL 9018
RAL 9022
RAL 9023
Hempel kulør
17160
17040
17060
17080
17100
17110
17120
10270
17530
10380
10520
17210
17220
13230
17240
17260
17300
17310
11320
17330
17340
11150
11730
11370
17380
17390
17700
17720
17730
17740
17750
17860
17770
17480
67000
67010
67020
67030
61810
67070
67080
67110
67120
67140
67150
60160
67170
60180
67220
67230
67240
67250
67280
20450
17620
17630
17940
19990
19000
19870
10170
17910
17760
17970
17980
19360
19230
Photographer: Bernd Duke
GB 10/2011 EN
HEMPEL (UK) LTD.
Llantarnam Industrial Park
Gwent NP44 3XF Cwmbran
Tel.: +44 (01633) 874024
Fax: +44 (01633) 489089
E-mail: sales.uk@hempel.com
www.hempel.co.uk