d e c o r a t i v e
Project:
Type:
Qty:
Exteriors 3.0 Series • Melinda • 5740-WL
Exterior
1.
CATALOG #
5740-WL-23
5740-WL-33
5740-WL-23
I
= (2) 40W A-19/MED.
I/H45
= (2) 40W A-19/MED. & 45W PAR 16 HALOGEN
I/MH20
= (2) 40W A-19/MED. & 20W MR 16 METAL HALIDE
F
= (2) FT39W/2G11
F/H45
= (2) FT39W/2G11 & 45W PAR 16 HALOGEN
F/MH20
= (2) FT39W/2G11 & 20W MR 16 METAL HALIDE
2.
LAMPING
QUICK FIND #: QF-3193
5740-WL-23
7"
A
13-1/14"
B
11"
3.
A = Projection with
mounting back box
B = Projection with no
mounting back box
4.
Ø9-1/2"
6-7/8"
23-1/4"
11-1/2"
5740-WL-33
8"
A
16-3/8"
B
13-3/4"
Side view with no
up or downlight.
Extended ballast
housing only
required for up
and/or downlight.
5.
6.
10-7/8"
33-1/4"
16-1/2"
Side view with no
up or downlight.
Extended ballast
housing only
required for up
and/or downlight.
7.
Weight Hanging (lbs.) *
BAL/LBP / 5740-WL-23
BB / 5740-WL-23
40 lbs.
70 lbs.
ORIENTATION
U
D
UD
= PAR OR MR LAMP IN THE UP POSITION
= PAR OR MR LAMP IN THE DOWN POSITION
= PAR OR MR LAMPS IN THE UP & DOWN POSITION
VOLTAGE
120V
277V
= 120 VOLT (Incandescent and Halogen & F/H 120V only)
= 277 VOLT
OA
FAH4
FAH5
FAH6
FAH7
= OPAL ACRYLIC
= WHITE VEIN HAND PAINTED FAUX ALABASTER
= ANTIQUE HAND PAINTED FAUX ALABASTER (beige)
= GRAY VEIN HAND PAINTED FAUX ALABASTER
= BEIGE VEIN HAND PAINTED FAUX ALABASTER
LENS OPTION
A = Projection with
mounting back box
B = Projection with no
mounting back box
Ø11-1/2"
BAL/LBP / 5740-WL-33
BB / 5740-WL-33
FINISH
BATTERY
BACKUP
56 lbs.
88 lbs.
* all wall mounts over 25 lbs. require additional hanging support.
Notes:
U
• UL listed and cUL Approved for wet location. c ® L US
• Winona Lighting products are union made.
• Custom Sizes and Finishes available upon request.
• All Fluorescent fixtures available in 120V and 277V,
unless paired with Halogen Up/Down light.
• For lamping options, see page 2.
• Battery backup only available on FT8 & FT12 lamping options.
Cannot be used in combination with the Up or Downlight options.
• Winona Lighting reserves the right to make design changes without prior notice.
• Lamps not included.
8.
5740-WL-33
= (3) 40W A-19/MED.
I
= (3) 40W A-19/MED. & 50W PAR 20 HALOGEN
I/H50
= (3) 40W A-19/MED. & 39W PAR 20 METAL HALIDE
I/MH39
= (2) FT40W/2G11
F
= (2) FT40W/2G11 & 50W PAR 20 HALOGEN
F/H50
= (2) FT40W/2G11 & 39W PAR 20 METAL HALIDE
F/MH39
= (2) F17T8/MED. BI-PIN
FT8
FT8/H50 = (2) F17T8/MED. BI-PIN & 50W PAR 20 HALOGEN
FT8/MH39 = (2) F17T8/MED. BI-PIN & 39W PAR 20 METAL HALIDE
= (2) F24T12HO/RECESSED D.C.
FT12
FT12/H50 = (2) F24T12HO/RECESSED D.C. & 50W PAR 20 HALOGEN
FT12/MH39 = (2) F24T12HO/RECESSED D.C. & 39W PAR 20 METAL HALIDE
SPECIAL
STANDARD
BAL
= BRUSHED ALUMINUM
BB
= BRUSHED BRASS
LBP
= LIGHT BRONZE PAINT WITH BRUSHED TEXTURE
CUSTOM
CPF
CMF
= CUSTOM PAINTED FINISH (consult factory)
= CUSTOM METAL FINISH (consult factory)
X
EMC
EMW
= NO BATTERY BACKUP
= COLD WEATHER BATTERY BACKUP
= WARM WEATHER BATTERY BACKUP
(available on FT8 and FT12 lamping options only)
STD
MOD
= STANDARD
= MODIFIED
Modification
Descriptions:
(if needed)
3760 west fourth street • winona, minnesota 55987 • 507 - 454 - 5113 • fax: 507 - 454 - 1814
www.winonalighting.com
Revised: 11-03-11
Page 1 of 2
d e c o r a t i v e
Project:
Type:
Qty:
Exterior
Exteriors 3.0 Options
Up/Down Light Position
Downlight ONLY Option = D
Uplight ONLY Option = U
Up AND Down Light Option = UD
Halogen or Metal Halide Par
Downlight Option with
Fluorescent or Incandescent
Halogen or Metal Halide Par
Uplight Option with
Fluorescent or Incandescent
Halogen or Metal Halide Par Up
and Down Light Option with
Fluorescent or Incandescent
Fluorescent Battery Backup Systems
Fluorescent Battery Backup Options:
EMC = Cold Weather Battery Backup
EMW = Warm Weather Battery Backup
Bodine Product -
Bodine B50 Cold Pak
Bodine Product -
Bodine BDL600
Temperature -
Rated to -20°C (-4°F)
Temperature -
Rated to 0°C (32°F)
Illumination Time -
90 Minutes
Battery -
High Temperature Maintenance
Free Nickel-Cadmium
Initial Illumination -
600 to 700 Lumens
Illumination Time - 90 Minutes
High Temperature Maintenance
Free Nickel-Cadmium
Battery -
Initial Illumination - 850 to 1050 Lumens
Note: Initial lumen output is tested at 25°C. Initial lumen
output decreases as ambient temperature decreases.
Lamp Options Available for Use with
Fluorescent Battery Backup Systems
FT8 & FT12
3703-WL-28
3703-WL-39
3709-WL-28
3709-WL-39
4925-WL-28
5250-WL-28
5250-WL-39
5700-WL-28
5700-WL-39
5710-WL-28
5710-WL-39
5720-WL-33
5730-WL-33
5740-WL-33
Notes:
• Fluorescent Battery Backup Systems are available for FT8 and FT12 lamp options ONLY.
• Battery Backup CANNOT be used when Halogen or Metal Halide up and/or down lights are specified.
• Test switch and LED charging indicator light must be remote and NOT mounted in a wet location.
Test switch indicator light and switch box plate are provided. Consult local building codes for mounting
requirements.
• All battery backup systems are wired for two-lamp operation.
3760 west fourth street • winona, minnesota 55987 • 507 - 454 - 5113 • fax: 507 - 454 - 1814
www.winonalighting.com
Revised: 4-19-11
Page 2 of 2