PH (419) 524.2121 FX (419) 525.4790
www.manairco.com manairco@manairco.com
HL-292
LED or Halogen
Heliport Perimeter
Inset Light
Compliances • FAA AC 150/5390-2B Heliport Design Guide
• US Army Aviation Lighting Manual TM 5-811-5, Figure 5-3
• Exceeds FAA Engineering Brief 87 Specifications • Transport Canada TP14371, AGA 7.16
• ICAO Annex 14, Volume II
• UK CAA CAP 437, Chapter 4, paragraph 3.1 (optional, please
• UL 1598 Standard (only “LP” lamp is UL listed)
specify at time of order)
Applications
Used to replace elevated helipad perimeter
lights at locations where the lights are
frequently knocked down by aircraft or
maintenance vehicles.
Why Our HL-292 is Better
• Lightweight and robust aluminum alloy
construction.
• HL-292 has been tested to 1,000 PSI
(pounds per square inch) and conforms
with both FAA and IEC requirements.
• Pressure test plug ensures moistureproof light cavity.
• Prism removal and replacement
achieved without need for adhesives or
sealants.
• Pre-focused optics simplify
maintenance.
• Corrosion resistant anodized finish.
• Available in 12-24 VDC or 120 VAC
versions.
• Direct retrofit, drop in replacement.
Factory retrofits available for your
existing halogen fixtures.
• Independent intensity testing has
provided results which exceed FAA
Engineering Brief 87 specifications.
• Available for non-airport applications
such as heliport and architectural lighting
with LED or 50W, 120V or 240V lamps.
Specifications
• Low profile: .39" (10mm).
• Light channel within .2" (5mm) of grade.
• Corrosion resistant finish meets U.S.
Military Standard Salt Fog Test (MILSTD-810E, Method 509.3) and IEC EN
60068-2-11 (Test Kb, severity 3).
• Color beam variations achieved by
dichroic coating.
• Exceeds L-861 photometric requirements when used as a medium intensity
white runway edge light.
• Lamp bypass options available if
required.
• 8" style: net weight 6.6 lbs. (3kg), gross
weight 7.7 lbs. (3.5kg). Carton size: .23
cu. ft. (.007 cu. meters); 9" (d) x 9" (w)
x 5" (h) (229mm (w) x 229mm (d) x
127mm (h))
LED Version
• Cost-saving, energy-efficient LEDs.
• Power Consumption:
AC input = 7.2VA; DC input = 4W.
• Low maintenance - LED light source
has 50,000 hour lifetime (50X longer
than halogen).
• Monochromatic output of LEDs is more
conspicuous than halogen.
• Pilots prefer LED over halogen because
of increased visibility.
• With our Dimming Controller option,
the lights can be dimmed at night to
reduce glare - select from three
brightness levels.
• LED can be used with 120V/240V,
50Hz/60Hz power.
• Power adapter included.
Data Sheet: HL-292
8/6/2015
Visible/Infrared LED Option
• Night Vision Goggle (NVG) compatible.
• Optical Specifications:
- Infrared Output:
• Exceeds SAE Aerospace
recommendations for Landing/Taxi
Lights.
• Usable beam width: 55° to 125°
vertical, 360° horizontal.
• Output wavelength: 850nm.
- Visible Output:
• Exceeds ICAO requirements for
green LEDs (see photometric chart).
• Usable beam width: 30° vertical,
360° horizontal.
• Output wavelength: 530nm.
• Electrical Specifications:
- Input voltage range: 100 to 240 VAC.
- Input frequency: 50 or 60Hz.
- Input current: 40mA AC.
- Input power to the fixture: 10.8 VA.
- Fixture is internally grounded for
installer safety.
H2.5.1
Page 1 of 3
HL-292
LED or Halogen
Heliport Perimeter
Inset Light
HL-292 OMNI-DIRECTIONAL
GENERAL ARRANGEMENT
1
Common Replacement Parts
1
2
ALT
N/A
4
6
8
15
16
18
ALT
ALT
ALT
ALT
20
ALT
21
22
23
24
25
ALT
N/A
N/A
N/A
Body Casting (Std) – Anodized
Deep Bottom Cover Casting
Shallow Bottom Cover Casting (7" BC)
Elkay Gland Set
Bottom Cover Gasket
Prism Clamp
Bottom Cover Spinning Clamp
Prism Clamp Gasket
Prism Gasket
Green Prism Dome
Yellow Prism Dome
Red Prism Dome
Blue Prism Dome
White (Clear) Prism Dome
50W 120V Reflector Lamp
LED Cluster
120V/240V lamp holder
Lamp Gasket
Lamp Retaining Spring
B-Type Male Lead (LED Only)
Pressure Test Plug
Schrader Tank Valve
2-Conductor Female Connector
3-Pin Male Connector (Halogen)
3-Conductor Female Connector (Halogen)
80-040206
80-040101
80-021114/5/6
27-4061T271
80-021307
80-021311
80-021309
80-033090
80-019193
80-019181
80-019182
80-019190
80-016080
LED
LA-008084
21
20-GL7
80-015057
80-033077
80-032039
TRC-10518-114D02
25
80-021343
80-021327
TRC-1051903021
80-013031
80-012022
16
18
15
6
22
20
23
4
2
24
Ordering Codes
Fixture
HL-2921
1
2
3
4
5
6
7
Output
G: Green (std)2
B: Blue
R: Red
W: White
Y: Yellow
IR: Infrared3
Lamps
50: 50W, 120V4
52: 50W, 240V4
LP: 120V/240V LED5
LV: 12V LED4
LVD: Dimming 12V LED4
Compliance
UK: UK CAP 4376
UL: UL Listed7
Photometric Comparison with
ICAO Requirements
Vertical Angle Avg. Intensity
(Deg)
(Cd)
ICAO Spec
(Cd)
HL-292
2
70.8
15
Formerly ‘HL-ZA292A’.
Green is currently the recommended color for heliport perimeter lights.
Infrared can be used in conjunction with color LEDs.
Lamp option is not UL listed.
Color LED with white (clear) prism. Power adapter included, 120V/240V.
Green is the approved output color.
Only “LP” lamp option can be UL listed.
5
66.5
30
10
48.3
15
13
36.6
8
20
23.9
3
H2.5.1
Page 2 of 3
Data Sheet: HL-292
8/6/2015
HL-292
LED or Halogen
Heliport Perimeter
Inset Light
5" Shallow Base (P/N BA-725-5-2)
Data Sheet: HL-292
8/6/2015
H2.5.1
Page 3 of 3