Abstract of our machine pool Machining Performance Working area Milling Horizontal machining center Horizontal machining center Vertical machining center Vertical machining center with rotary table CNC tool milling machine with rotary table 400 x 400 x 500 mm 500 x 500 x 650 mm 1600 x 500 x 500 mm 1600 x 500 x 500 mm 500 x 400 x 400 mm Drilling, Boring Column, Gang, Bench and Multi-spindle drilling machines Screw-tapping machines Vertical broaching machines Ø max. 25 mm M 1 up to M 10 (VA up to M 8) Groove width up to 10.0 mm Lathing (All machines are equipped with driven milling tools) CNC lathe with secondary spindle CNC lathes, NC lathes Front CNC lathe Spindle passage up to 90 mm Ø Swing 450 up to 800 mm Ø up to 2000 mm Sawing Band saw with automatic feed Circular saw with automatic feed Ø max. 250 mm Sheet metal forming Performance Working area Programming Adoption of DXF, DWG formats for further processing into programming software is possible by arrangement NC punching and laser cutting Laser-punch combination machines TRUMATIC Punching force up to 25t, Sheet metal plates 2500 x 1250 mm Flatbed laser machine, Sheet metal plates 2500 x 1250 mm Punching: Fe/Al 6 mm; VA 5 mm Laser: Fe 10 mm; Al 5 mm, VA 6 mm Laser: Fe 15 mm; Al 6 mm, VA 8 mm Sheet metal cuts Hydraulic plate shears Fe 4 mm; VA 2 mm; Folding – Stamping - Trueing Hydraulic folding machines 500kN at 2000 mm; 1300kN at 3000 mm; 2500kN at 1200 mm at 3000 mm length, max. sheet thickn. 5 mm from 3 mm sheet thickn. free folding Joining technique Performance Working area Spot welding 16 up to 100 KVA alternating current; 125 KVA direct current 0.5 – 6.0 mm steel / VA; 1.0 – 4.0 mm Al Gas-shielded welding Mig-Mag Pulse-ARC-welding equipment WIG-welding 200 - 400 A 400 A 150 - 300 A steel / VA / aluminum; Universal champing systems Welding table sizes up to 2000 x 2000 mm CNC stud welding Pins, bushes up to Ø 3-8 mm X x 700 mm, Y x 500 mm, Z x 200 mm Press, orbital and blind riveting up to 20 t (pressing); up to 6 mm rivet shank (orbital riveting) BRIVE, NUTSERT, MONOBOLT, AVDEL Assembly Performance Working area Component assembly Final assembly Assembling of prefabricated single parts to a system Integration of mechanics with electrics, electronics and optics Complex systems Surface treatment Performance Working area Abrasive Automatic deburring, Brushing, Barrel finishing, Fine grinding, Excellent finish, Polishing, Slide grinding max. 500 mm x 1300 mm Galvanizing RoHS-compliant Zinc (yellow, blue) acc. to DIN 50961 and thick film passivating Electrolytic polishing acc. to LAT4-0034, Passivating acc. to LN 29747 and LAT4-1201 Type A, B, D, Chromating Surtec TCP650 acc. to LN 9368-3 K-No.1108; MIL-DTL81706B; MIL-DTL 5541F; VW TL13750V111; Sulphuric acid – Anodizing (Eloxal black, nature and special colors upon request) acc. to DIN17611; DIN ISO 7599 Bath sizes 2000 mm x 600 mm x 1000 mm Bath sizes 600 mm x 600 mm x 800 mm Bath sizes 600 mm x 600 mm x 800 mm Bath sizes 2000 mm x 600 mm x 1000 mm Spray painting or stove enameling based on water, PU-based (LAT4-5315, LAT4-5322) and on epoxy resin basis (LAT4-5314) Common part sizes 2000 mm x 1000 mm x 1000 mm Painting Centre distance >1000mm Sheet width 3000 mm Bath sizes 2000 mm x 600 mm x 1000 mm