Switchcraft
Page 1 of 4
Previous Page | Return to Index | Next Page
GENERAL PURPOSE SLIDE SWITCHES - TANDEM
SERIES 47200E, 47200R - 2 POSITION
1. 47206LR
2. 47206LCE
3. 47227LFR
click here to download a schematic drawing
http://www.switchcraft.com/products/switch-289.html
12/14/2007
Switchcraft
Page 2 of 4
(you will need to have Adobe Acrobat installed on your system to do this)
Space saving, two-gang slide switches are contained in one housing. Switching is locking type with non-shorting contacts.
SPECIAL ORDER FEATURES
1. .344 inch (8.74 mm) high knobs or flush knobs are standard, depending on switch selected; other heights available.
2. Series 47000R switches are CSA marked on special order only.
SPECIFICATIONS
Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive, (Also 1.5A, 250V non-inductive for Series 47000E only.)
47227LFR switches are not designed to switch more than 125V, and must be set to desired position before power is applied to
equipment or appliance.
Listings: UL recognized, card E40668, and CSA certified (card 28260). Series 47000R switches are CSA certified on special
order only.
Housing: Steel, plated.
Knob: Black thermoplastic.
Terminals and Slider Contacts: Copper alloy, silver-plated.
Insulation: Series 47000E - Thermoplastic. Series 47000R - Rigid plastic.
Temperature Range: -4°F to +158°F (-20°C to +70°C).
Dielectric Strength: 1 kV rms @ sea level.
Insulation Resistance: 1 k M(omega) minimum.
http://www.switchcraft.com/products/switch-289.html
12/14/2007
Switchcraft
Page 3 of 4
PART NUMBERS
Series
47200E
ý 47202LE
Series
47200R
ý 47202LR
Description
SPST - SPST
ý 47203LE
ý 47203LR
SPDT - SPDT
ý 47204LE
ý 47204LR
DPST - DPST
ý 47204LCE
ý 47204LCR
DPST - DPST
ý 47206LE
ý 47206LR
DPDT - DPDT
ý 47206LCE
ý 47206LCR
DPDT - DPDT
ý 47215LR
SPST - SPDT
ý 47215LCR
SPST - SPDT
ý 47217LR
SPST - DPST
ý 47217LCR
SPST - DPST
ý 47221LR
SPDT - DPST
ý 47221LCR
SPDT - DPST
ý 47227LFE
ý 47227LFR
DPDT - DPDT
DPDT - DPDT
-
Schematic
II
II
III
III
2-I
2-I
2-I
2-I
2-III
2-III
2-III
2-III
II
III
II
III
II
2-II
II
2-II
III
2-II
III
2-II
2-V
2-V
NOTE: Series 47200E and 47200R - All switches have two independent knobs, except:
• 47204LE, 47204LCR, 47206LCE and 47206LCR have one knob and one flush actuator.
http://www.switchcraft.com/products/switch-289.html
12/14/2007
Switchcraft
Page 4 of 4
• 47227LFE and 47227LFR have internal mechanical coupling and two flush, slotted
screwdriver actuators.
ý Special order only; contact Switchcraft
Previous Page | Return to Index | Next Page
To search a category please click on the corresponding icon:
| Connectors | Jacks and Plugs |
| Patch Panels, Patch Kits & Jackfields | Cable Assemblies and Patch Cords | Switches |
All products shown are covered by Switchcraft's limited lifetime warranty.
| Switchcraft home |
About Us | Products | What's New | Search | Contact Us
http://www.switchcraft.com/products/switch-289.html
12/14/2007