Avaya Proactive Contact
Release 4.0
Maintenance and Troubleshooting
March 2008
© 2008 Avaya Inc. All Rights Reserved.
All other trademarks are the property of their respective owners.
Notice
While reasonable efforts were made to ensure that the information in this
document was complete and accurate at the time of printing, Avaya Inc. can
assume no liability for any errors. Changes and corrections to the information
in this document might be incorporated in future releases.
Downloading documents
For the most current versions of documentation, see the Avaya Support Web
site:
http://www.avaya.com/support
Documentation disclaimer
Avaya Inc. is not responsible for any modifications, additions, or deletions to
the original published version of this documentation unless such modifications,
additions, or deletions were performed by Avaya. Customer and/or End User
agree to indemnify and hold harmless Avaya, Avaya's agents, servants and
employees against all claims, lawsuits, demands and judgments arising out of,
or in connection with, subsequent modifications, additions or deletions to this
documentation to the extent made by the Customer or End User.
Link disclaimer
Avaya Inc. is not responsible for the contents or reliability of any linked Web
sites referenced elsewhere within this documentation, and Avaya does not
necessarily endorse the products, services, or information described or offered
within them. We cannot guarantee that these links will work all the time and we
have no control over the availability of the linked pages.
Warranty
Avaya Inc. provides a limited warranty on this product. Refer to your sales
agreement to establish the terms of the limited warranty. In addition, Avaya’s
standard warranty language, as well as information regarding support for this
product, while under warranty, is available through the Avaya Support Web
site:
http://www.avaya.com/support
License
USE OR INSTALLATION OF THE PRODUCT INDICATES THE END USER'S
ACCEPTANCE OF THE TERMS SET FORTH HEREIN AND THE GENERAL
LICENSE TERMS AVAILABLE ON THE AVAYA WEB SITE
http://support.avaya.com/LicenseInfo/
("GENERAL LICENSE TERMS"). IF YOU DO NOT WISH TO BE BOUND BY
THESE TERMS, YOU MUST RETURN THE PRODUCT(S) TO THE POINT
OF PURCHASE WITHIN TEN (10) DAYS OF DELIVERY FOR A REFUND OR
CREDIT.
Avaya grants End User a license within the scope of the license types
described below. The applicable number of licenses and units of capacity for
which the license is granted will be one (1), unless a different number of
licenses or units of capacity is specified in the Documentation or other
materials available to End User. "Designated Processor" means a single
stand-alone computing device. "Server" means a Designated Processor that
hosts a software application to be accessed by multiple users. "Software"
means the computer programs in object code, originally licensed by Avaya and
ultimately utilized by End User, whether as stand-alone Products or
pre-installed on Hardware. "Hardware" means the standard hardware
Products, originally sold by Avaya and ultimately utilized by End User.
License type(s)
Copyright
Except where expressly stated otherwise, the Product is protected by copyright
and other laws respecting proprietary rights. Unauthorized reproduction,
transfer, and or use can be a criminal, as well as a civil, offense under the
applicable law.
Third-party components
Certain software programs or portions thereof included in the Product may
contain software distributed under third party agreements ("Third Party
Components"), which may contain terms that expand or limit rights to use
certain portions of the Product ("Third Party Terms"). Information identifying
Third Party Components and the Third Party Terms that apply to them is
available on the Avaya Support Web site:
http://support.avaya.com/ThirdPartyLicense/
Preventing toll fraud
"Toll fraud" is the unauthorized use of your telecommunications system by an
unauthorized party (for example, a person who is not a corporate employee,
agent, subcontractor, or is not working on your company's behalf). Be aware
that there can be a risk of toll fraud associated with your system and that, if toll
fraud occurs, it can result in substantial additional charges for your
telecommunications services.
Avaya fraud intervention
If you suspect that you are being victimized by toll fraud and you need technical
assistance or support, call Technical Service Center Toll Fraud Intervention
Hotline at +1-800-643-2353 for the United States and Canada. For additional
support telephone numbers, see the Avaya Support Web site:
http://www.avaya.com/support
Trademarks
Avaya and the Avaya logo are either registered trademarks or trademarks of
Avaya Inc. in the United States of America and/or other jurisdictions.
114549Avaya support
Avaya provides a telephone number for you to use to report problems or to ask
questions about your product. The support telephone number
is 1-888-732-3343 in the United States. For additional support telephone
numbers, see the Avaya Support Web site:
http://www.avaya.com/support
To provide feedback on this document, send email to infodev@avaya.com.
Contents
Preface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Reasons for reissue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Related documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
Hardware maintenance large cabinet and PG230 . . . . . . . . . . . . . . . . . . . . . . .
15
Reseat or replace current supported cards . . . . . . . . . . . . . . . . . . . . . . . .
15
Reseat or replace obsolete cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Obsolete cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ribbon cable from the SWI to the NBC. . . . . . . . . . . . . . . . . . . . . . . . .
16
17
18
Avaya Proactive Contact dialer troubleshooting . . . . . . . . . . . . . . . . . . . . . . .
21
Enhanced Network Bus Controller (ENBC) . . . . . . . . . . . . . . . . . . . . . . . .
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solutions for red or yellow LED . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
22
22
Large Port Voice Card (LPVC2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solutions for red or yellow LED . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
24
24
Enhanced Universal Trunk card (EUTC) . . . . . . . . . . . . . . . . . . . . . . . . . .
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
25
25
Operator Line Interface card (OLIC2). . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
26
26
Quad digital trunk cards. . . . . . . . . . . . . . . . . . . . . . . . . .
Quad T1 (QT1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quad T1 primary rate interface card (QT1-PRI) . . . . . . . . . . .
Quad E1-Channel Associated Signaling 120 Ohm (QE1-CAS 120) .
Quad E1Primary Rate ISDN 120 Ohm (QE1-PRI 120) . . . . . . . .
Quad E1-Channel Associated Signaling 75 Ohm (QE1-CAS 75) . .
Quad E1- Primary Rate ISDN 75 Ohm (QE1-PRI 75) . . . . . . . . .
.
.
.
.
.
.
.
27
28
29
30
31
33
34
Digital Signal Processor -2 (DSP2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
36
Internet Protocol Telephony Card (IPTC). . . . . . . . . . . . . . . . . . . . . . . . . .
37
Software Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39
Understanding backup and restore operations . . . . . . . . . . . . . . . . . . . . . .
39
Using backup and restore commands . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor the DAT drive status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40
40
Maintenance and Troubleshooting Guide
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
March 2008
1
Various options for Backup and Restore . . . . .
Back up the complete system . . . . . . . . .
Back up the system and calling lists . . . . . .
Back up Avaya Proactive Contact system files
Back up system configuration files . . . . . .
Back up system data/stat files . . . . . . . . .
Restore all the data . . . . . . . . . . . . . . .
Restore a file from archive . . . . . . . . . . .
List/Verify a file in archive. . . . . . . . . . . .
List/Verify archive contents . . . . . . . . . . .
List archive volume information . . . . . . . .
Back up all calling lists . . . . . . . . . . . . .
Back up a specific calling list . . . . . . . . . .
Restore all calling lists . . . . . . . . . . . . .
Restore a specific calling list . . . . . . . . . .
Back up a database . . . . . . . . . . . . . . .
Restore a database . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41
41
42
42
43
44
44
45
46
46
47
47
48
48
49
49
50
Error messages and message type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
Troubleshooting questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
121
Unable to start jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
121
List did not download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
122
Agent cannot connect- dialback failure - unable to login - headset in use . . . . . . .
123
Reports not working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analyst - GUI based reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC Analysis - UNIX Based Reporting. . . . . . . . . . . . . . . . . . . . . . . . . .
123
123
124
Call completion codes such as line Idle, busy, or hung up in queue, appears excessively 124
2
Internet Monitor issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
Changes affecting performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
125
126
Agent key files . . . . . . .
Calling list . . . . . . .
Upload/Download list .
Dialer event Scheduler
Completion Codes . . .
Message Mapping . . .
.
.
.
.
.
.
126
126
127
127
127
127
Back ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
127
Data pops (slow or none) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
128
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Maintenance and Troubleshooting Guide
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
March 2008
Predictive Blend not acquiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
128
Detailed troubleshooting questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
129
Networking Issues: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
129
Hardware troubleshooting .
General hardware issues
Avaya CPU Issues . . . .
Digital Switch Issues . .
Telephony Issues . . . .
.
.
.
.
.
130
130
131
131
132
Telephony & Switch Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .
132
Software Issues . . . . . . .
General software issues.
Mid-Tier Services Issues
Supervisor . . . . . . . .
Database Services . . . .
.
.
.
.
.
137
137
137
138
138
Avaya Proactive Contact Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . .
141
Verify software is running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
141
CORBA services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
nsls script fails to list names in Naming_Service . . . . . . . . . . . . . . . . . . .
Some services fail to start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
142
142
142
Sales Verification testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
143
CCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CCS not running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CCS not passing requests to DCCS server . . . . . . . . . . . . . . . . . . . . . .
143
143
144
DCCS . . . . . . . . . . . . . . . .
DCCS processing errors . . .
DCCS and Corba problems . .
DCCS crashes . . . . . . . . .
DCCS general troubleshooting
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
144
144
144
144
145
Jobs. . . . . . . . . . . . . . . . . . . . .
Using Test Mode . . . . . . . . . . . .
Job will not start . . . . . . . . . . . .
Jobs ends just after start . . . . . . .
Invalid headset ID . . . . . . . . . . .
Agent profile will not execute . . . . .
Selection list Unavailable for use. . .
Job in test mode ignores keystrokes.
General Job troubleshooting . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
146
146
148
148
149
149
150
150
150
CTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
152
Maintenance and Troubleshooting Guide
.
.
.
.
.
.
.
.
.
.
March 2008
3
Installation: Verify CTI link . . . . .
CTO OAM Utilities . . . . . . . . . .
CTI Troubleshooting . . . . . . . . .
Troubleshooting tips for Avaya CTI
.
.
.
.
152
157
158
159
StatsPump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
160
Mid-Tier Database . . . . . . . . . . . . . . . . . . . .
Mid-Tier database network problems . . . . . . .
Mid-Tier database not running . . . . . . . . . . .
Verify Mid-Tier components can access database
.
.
.
.
161
161
161
162
Mid-Tier Data Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
162
Dialer Mid-Tier connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
163
Historical Data Server Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HDCC troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
164
164
Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recovering in the event of media failure . . . . . . . . . . . . . . . . . . . . . . . .
Common Oracle errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
167
168
169
End user applications .
Analyst . . . . . . .
Editor . . . . . . . .
Monitor . . . . . . .
.
.
.
.
170
170
171
172
Error message, source and error description table . . . . . . . . . . . . . . . . . . . . . .
175
Error message text and source file table. . . . . . . . . . . . . . . . . . . . . . . . . . . .
269
Cannot transfer inbound call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
385
Command failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
387
Timed out waiting for <message> . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
389
Operator monitor process does not respond . . . . . . . . . . . . . . . . . . . . . . .
391
Agent <name> logged in Already - Access Denied . . . . . . . . . . . . . . . . . . . .
393
Unable to send message to porter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
395
Password has expired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
397
<agent><agent_name> - Operator number returned invalid <slot_num> . . . . . . . .
399
Incorrect message type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
401
Incorrect number of arguments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
403
Must select unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
405
Failed to allocate memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
407
Audio file name too long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
409
Bad argument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
411
4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Maintenance and Troubleshooting Guide
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
March 2008
ERROR - Unknown file descriptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
413
Invalid entry for <name> in <filename> . . . . . . . . . . . . . . . . . . . . . . . . . .
415
Field has incorrect length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
417
Bad file descriptor <num>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
419
Invalid headset number <num> <line> . . . . . . . . . . . . . . . . . . . . . . . . . . .
421
Failed to initialize screen environment. . . . . . . . . . . . . . . . . . . . . . . . . . .
423
Invalid line selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
425
Invalid logical connector <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
427
Invalid recall code <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
429
Invalid ring count <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
431
Invalid time format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
433
Conference in progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
435
Field not defined in calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
437
Unable to create file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
439
agent - Failed to read from file <name> . . . . . . . . . . . . . . . . . . . . . . . . . .
441
Failed to unlock file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
443
Warning: CFRM message truncated . . . . . . . . . . . . . . . . . . . . . . . . . . . .
445
Callbacks are not permitted on inbound calls . . . . . . . . . . . . . . . . . . . . . . .
447
Field <name> not defined in calling list <filename> . . . . . . . . . . . . . . . . . . . .
449
clstat <xfd> failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
451
Failed to remove file <filename> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
453
Clear fdict <number> failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
455
Date is before the current date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
457
Incoming command exceeded maximum buffer size . . . . . . . . . . . . . . . . . . .
459
<string>: Confirm error (num) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
461
File corruption or record size mismatch detected in calling list (name> . . . . . . . .
463
CTI Error: <string><num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
465
CTI not configured for agent events . . . . . . . . . . . . . . . . . . . . . . . . . . . .
467
Duplicate ALL phone numbers specification . . . . . . . . . . . . . . . . . . . . . . .
469
Duplicate country specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
471
Environment variable not set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
473
OnEventEstablished: Unknown command (7) . . . . . . . . . . . . . . . . . . . . . . .
475
Recall attempt can’t exceed <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . .
477
Extra comma in selection criteria. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
479
Failed to setup command keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
481
Failed to lock file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
483
Maintenance and Troubleshooting Guide
March 2008
5
6
Failed to initialize keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
485
Failed to open directory <dir_name> . . . . . . . . . . . . . . . . . . . . . . . . . . . .
487
Failed to read file header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
489
Failed to initialize switcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
491
Fail to load record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
493
Fatal error on select - <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
495
Field name <name> is invalid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
497
Invalid field value <value>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
499
Missing or invalid entry in file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
501
File <filename> exists, but is not readable by user <user_name . . . . . . . . . . . . .
503
File <filename> exists, but cannot be written by user <user_name . . . . . . . . . . .
505
File <filename> does not exist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
507
File did not close. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
509
No space on file system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
511
Unequal phone number field lengths in file <name> . . . . . . . . . . . . . . . . . . .
513
Field value not in acceptable list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
515
Entry <value> missing/invalid in <filename> file . . . . . . . . . . . . . . . . . . . . .
517
Gap found between selection criteria lines . . . . . . . . . . . . . . . . . . . . . . . .
519
Headset <id_num> not specified in dgswitch.cfg file . . . . . . . . . . . . . . . . . . .
521
Headset port number <num> out of range . . . . . . . . . . . . . . . . . . . . . . . . .
523
<agent_name> - Exceeded operator slots available, MAXOPS is low . . . . . . . . . .
525
Inbound agents only permitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
527
Invalid answer delay time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
529
Invalid call detection mode <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . .
531
CSTAUniversalConfEvent for call monitor, error = 24. . . . . . . . . . . . . . . . . . .
533
Invalid format character found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
535
invalid channel number <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
537
Invalid DAA type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
539
Invalid date format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
541
Invalid delay specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
543
Invalid file name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
545
New password entered is invalid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
547
Invalid offhook retry delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
549
Invalid phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
551
Invalid phone <number> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
553
Invalid phone number length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
555
Maintenance and Troubleshooting Guide
March 2008
Invalid phonestat - <status>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
557
Original password is invalid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
559
Invalid pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
561
Invalid recall code <code> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
563
Invalid response from operator monitor process. . . . . . . . . . . . . . . . . . . . .
565
Invalid range character . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
567
Invalid ring count <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
569
Invalid time zone character <char> . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
571
Invalid use of ALL phone numbers specification . . . . . . . . . . . . . . . . . . . . .
573
Invalid VM2 locale code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
575
Invalid wait limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
577
Failed to invoke function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
579
IPC - invalid input argument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
581
IPC - invalid ipc entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
583
Invalid ipc number <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
585
<process_name> - Accessing bad semaphore . . . . . . . . . . . . . . . . . . . . . .
587
<process_name> - Failed to open semaphore, err(<num>). . . . . . . . . . . . . . . .
589
<process_name> - Failed on semaphore operation, err <err_num> key = <sem_key_id> code
= <op_code> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
591
<process_name> Failed on semaphore removal, err=<num> key=<num> . . . . . . .
593
IPC - Failed to open opmon message queue . . . . . . . . . . . . . . . . . . . . . . .
595
Response message too long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
597
IVR_SCRIPT is blank in job <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . .
599
Failed to create jobmon graphical user interface (GUI) . . . . . . . . . . . . . . . . . .
601
Job <name> not running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
603
Job <name> is not valid for IVR agents . . . . . . . . . . . . . . . . . . . . . . . . . .
605
Error loading job chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
607
Attempt to store list_client on host failed . . . . . . . . . . . . . . . . . . . . . . . . .
609
Line not released . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
611
Mastercfg error. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
613
Failed to determine max number of phones . . . . . . . . . . . . . . . . . . . . . . . .
615
Unable to remove message queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
617
Missing delay specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
619
Missing high range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
621
Missing completion code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
623
Missing line type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
625
Maintenance and Troubleshooting Guide
March 2008
7
8
Missing or invalid num of chars to strip . . . . . . . . . . . . . . . . . . . . . . . . . .
627
Missing phone numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
629
Missing prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
631
Missing limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
633
Missing suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
635
Missing or invalid low range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
637
Missing or invalid reject phone number pattern . . . . . . . . . . . . . . . . . . . . . .
639
Missing or invalid time zone designation . . . . . . . . . . . . . . . . . . . . . . . . .
641
Missing time zone specification for country <num> . . . . . . . . . . . . . . . . . . .
643
MakeCall/MakePredictiveCall/TransferCall Confirm error (33) . . . . . . . . . . . . . .
645
<type> agents are not permitted on this job . . . . . . . . . . . . . . . . . . . . . . . .
647
Must specify transfer job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
649
Failed to attach shared memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
651
Cannot open channel to operator monitor process . . . . . . . . . . . . . . . . . . . .
653
Failed to detach shared memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
655
No DONE_TME setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
657
Failed to find linked job file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
659
Unable to open keys file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
661
Failed to get message queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
663
Unable to receive a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
665
Failed to send message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
667
No more records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
669
Field has non-numeric value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
671
No previous record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
673
Failed to process file <filename> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
675
Cannot be DONE from alternate screen . . . . . . . . . . . . . . . . . . . . . . . . . .
677
Non-directory in directory path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
679
<process_name> failed to read from file <filename> . . . . . . . . . . . . . . . . . . .
681
Recall not allowed for inbound call. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
683
No record found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
685
No REL_DIST setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
687
No REL_TME setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
689
Failed to remove shared memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
691
Sales verification with unit work lists is not permitted . . . . . . . . . . . . . . . . . .
693
Missing std to dial phone number format . . . . . . . . . . . . . . . . . . . . . . . . .
695
Not a calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
697
Maintenance and Troubleshooting Guide
March 2008
Unable to become root privilege for setting password . . . . . . . . . . . . . . . . . .
699
Cannot find time zone for phone number . . . . . . . . . . . . . . . . . . . . . . . . .
701
Failed to create window pointer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
703
Failed to write to file <filename> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
705
Only outbound agents permitted by sales verification . . . . . . . . . . . . . . . . . .
707
Outbound or Managed agents only permitted . . . . . . . . . . . . . . . . . . . . . . .
709
<opname> operation failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
711
<op_name> operation failed for file <file_name> . . . . . . . . . . . . . . . . . . . . .
713
<string><string>- Operator number returned wrong <num1>, job number <num2> . .
715
Operator slot semaphore not available . . . . . . . . . . . . . . . . . . . . . . . . . .
717
Headset value (<headset_value>, <return_value>) out of bound. . . . . . . . . . . . .
719
Outbound agents only permitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
721
Pattern error at line <number> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
723
Pattern error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
725
Telephone line not available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
727
Telephone line not offhook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
729
Phone number too long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
731
Timed out waiting for response from porter . . . . . . . . . . . . . . . . . . . . . . . .
733
Password can not be changed, change limit not expired. . . . . . . . . . . . . . . . .
735
Preview record search failed to initialize. . . . . . . . . . . . . . . . . . . . . . . . . .
737
Changes to record not saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
739
Recall can't be less than <num> minutes . . . . . . . . . . . . . . . . . . . . . . . . .
741
Range does not come after previous range . . . . . . . . . . . . . . . . . . . . . . . .
743
Recall time and date outside timezone. . . . . . . . . . . . . . . . . . . . . . . . . . .
745
Record is no longer available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
747
Record currently in use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
749
Rejected phone number (L<num>) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
751
Field entry is required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
753
Route End Error: RegReqID = <num>, CrossRefID = <num>, Error = <num> . . . . . .
755
Report failed, system out of space . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
757
Molocale - unknown language name <lang>. . . . . . . . . . . . . . . . . . . . . . . .
759
Selection list not available for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
761
Could not verify selection list for job. . . . . . . . . . . . . . . . . . . . . . . . . . . .
763
Selection list not created with this calling list . . . . . . . . . . . . . . . . . . . . . . .
765
Could not verify selection list for job. . . . . . . . . . . . . . . . . . . . . . . . . . . .
767
Cannot find service in /etc/services . . . . . . . . . . . . . . . . . . . . . . . . . . . .
769
Maintenance and Troubleshooting Guide
March 2008
9
10
Caught signal number <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
771
Caught signal <num> and terminated . . . . . . . . . . . . . . . . . . . . . . . . . . .
773
Socket call failed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
775
Unable to setup listen on socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
777
Socket failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
779
Socket connection to list server running on <name> failed . . . . . . . . . . . . . . .
781
STATUSFLAG field missing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
783
Failed to process line (<line_buffer_name>). . . . . . . . . . . . . . . . . . . . . . . .
785
tget returned error number <num> raising signal <num> . . . . . . . . . . . . . . . .
787
<string>-<string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
789
Timed out waiting for <string> confirmation. . . . . . . . . . . . . . . . . . . . . . . .
791
Calling list <name> is not in shared memory . . . . . . . . . . . . . . . . . . . . . . .
793
Calling list line count does not match shared memory . . . . . . . . . . . . . . . . . .
795
Invalid normal trunk equipment number <num> . . . . . . . . . . . . . . . . . . . . .
797
Normal trunk port number <num> out of range . . . . . . . . . . . . . . . . . . . . . .
799
Unable to bind to local address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
801
Unable to accept connection on socket . . . . . . . . . . . . . . . . . . . . . . . . . .
803
Unable to access host <name> using name . . . . . . . . . . . . . . . . . . . . . . . .
805
Unable to connect to socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
807
Failed to create directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
809
Failed to read calling list definition. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
811
Unable to open list <calling_list_name> . . . . . . . . . . . . . . . . . . . . . . . . . .
813
Process unable to send <string> to <process_name> . . . . . . . . . . . . . . . . . .
815
Unable to send data to socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
817
Molocale - failed to set locale <name> . . . . . . . . . . . . . . . . . . . . . . . . . . .
819
Call blending is not available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
821
Unequal phone number field lengths in file <filename> . . . . . . . . . . . . . . . . .
823
Unknown Command message - <command> . . . . . . . . . . . . . . . . . . . . . . .
825
Unknown IPC message - <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
827
Incorrect job type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
829
Unknown screen type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
831
Unit value not found, or unavailable . . . . . . . . . . . . . . . . . . . . . . . . . . . .
833
Linking between virtual agent jobs and non-virtual jobs is not permitted. . . . . . . .
835
Unable to open file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
837
Failed to find screen <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
839
Write error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
841
Maintenance and Troubleshooting Guide
March 2008
Index
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance and Troubleshooting Guide
March 2008
843
11
12
Maintenance and Troubleshooting Guide
March 2008
Preface
This section contains the following topics:
●
Purpose on page 13
●
Audience on page 13
●
Reasons for reissue on page 13
●
Related documents on page 14
Purpose
The purpose of this guide is to provide detailed information for hardware and software
maintenance for the Avaya Proactive Contact 4.0 system. It also includes up to date
troubleshooting for hardware and software maintenance for the Avaya Proactive Contact 4.0
system.
Audience
This guide is for personnel who install, configure, and troubleshoot Avaya Proactive Contact
installations.
Reasons for reissue
Avaya Proactive Contact 4.0 is a major new release of the Avaya Proactive Contact (previously
known as PDS), featuring substantial advances in core functionality, new deployment options,
and updates to the underlying platform technology.
Avaya Proactive Contact 4.0 provides you with three system deployment options tailored to
meet your specific call center requirements:
●
Avaya Proactive Contact with AES.
Maintenance and Troubleshooting Guide
March 2008
13
●
Avaya Proactive Contact with Avaya PG230 Proactive Contact Gateway (available with an
Avaya-provided server)
●
Avaya Proactive Contact system (with the traditional system cabinet)
This release supports simple migrations between the different deployments allowing you to start
small and easily upgrade to a larger system.
All configurations use the same robust Avaya Proactive Contact core predictive dialing
application and the same client suite called Avaya Proactive Contact Supervisor. The
application suite includes Monitor, Editor, Analyst, and a new Health Manager application
designed to help you monitor and administer system functions. Changes were also made to
provide a more robust, simplified version of the current feature set, as well as simplified
configuration and installation of the system. Powerful tools such as Hierarchy Manager and
Completion Code Manager continue to be supported.
Avaya Proactive Contact 4.0 introduces an updated predictive dialing algorithm with a
revolutionary operating mode called Cruise Control, which allows you to achieve even higher
operational efficiencies than were previously possible with Avaya PDS version 12.0.
Related documents
14
●
Planning and Prerequisites for Avaya Proactive Contact
●
Installing and Configuring Avaya Proactive Contact
●
Administering Avaya Proactive Contact (UNIX-based Interface)
●
Using Avaya Proactive Contact Supervisor
●
Using Avaya Proactive Contact Analyst
●
Avaya Proactive Contact Safety and Regulatory Information
●
Avaya Proactive Contact Documentation Library (CD-ROM)
Maintenance and Troubleshooting Guide
March 2008
Hardware maintenance large cabinet and
PG230
This section details the hardware maintenance tasks required for the large cabinet and PG230.
The maintenance involves replacing or reseating cards. The topics covered in this section are:
●
Reseat or replace current supported cards
●
Reseat or replace obsolete cards
Reseat or replace current supported cards
To reseat or replace a card follow these steps:
1. Power down the switch and the card cage.
2. Slide the board into the card slot.
Maintenance and Troubleshooting Guide
March 2008
15
3. Hook the tabs onto the upper and lower lips of the card shelf.
4. Press firmly on the tabs to seat the board.
Reseat or replace obsolete cards
These cards are still in use but are no longer shipping. The topics covered in this section are:
16
Maintenance and Troubleshooting Guide
March 2008
Obsolete cards
To remove the SWI card, follow these steps:
1. Shut down Digital Switch Controller (DSC) through the menu system.
2. Wait for the File System Successfully Closed message on the Switch Console
screen.
3. Power off the Digital Switch Controller.
4. Unscrew the 1/8 inch Phillip's head screws on both sides of the card.
Note:
Note:
The screws do not need to be removed entirely from card.
5. Pull outward on tabs on both sides of the SWI card as shown below:
6. Pull the card out of the card slot.
7. Place the card on a static-proof mat or in a static-proof bag.
To replace the card with a new card:
1. Verify that the jumper settings on replacement card are the same as on the original.
2. Insert the card into the same slot that you removed the previous card from.
3. Push in card at points just inside the tabs on both sides of the card as shown below until
card is firmly seated.
4. Tighten the screws on both sides of the card.
Maintenance and Troubleshooting Guide
March 2008
17
5. Restart the DSC.
Ribbon cable from the SWI to the NBC
The ribbon cable from the SWI to the NBC originates on the back of the Digital Switch Controller
(DSC). A metal cable housing clamps this ribbon cable in place to prevent it unseating itself. In
order to reseat or replace this cable, you must loosen the housing clamp and remove the
housing from the DSC.
Follow these steps to reseat or replace the ribbon cable:
1. Loosen the screws identified as Step1 in the illustration to clamp and un-clamp the ribbon
cable.
18
Maintenance and Troubleshooting Guide
March 2008
2. Loosen the screws identified as Step 2 in the illustration to slide the clamp plate up and
down. Reseat the ribbon cable if necessary.
3. If you need to replace the ribbon cable, you need to remove the screws labeled Step 3 in
the illustration.
4. Replace the ribbon cable if necessary.
In step 5, pull the card straight back out of the slot without pulling outwards on the tabs on either
side of the card as illustrated in the following:
Make sure to push the A RESET button so that the DSC reboots after the file system has been
shut down through the menus. Switch the A-AUTO-B switch to the "A" position so that in normal
operation the switch auto boots after a crash.
Maintenance and Troubleshooting Guide
March 2008
19
20
Maintenance and Troubleshooting Guide
March 2008
Avaya Proactive Contact dialer
troubleshooting
This section details solutions for hardware related issues in the Avaya Proactive Contact dialer.
The two versions of the Avaya Proactive Contact hardware dialer are:
●
Avaya Proactive Contact System
●
Avaya Proactive Contact with PG230
The telecommunications switching component in each version is the same Avaya proprietary
switch.
The cards covered in this section are the:
●
Enhanced Network Bus Controller (ENBC)
●
Large Port Voice Card (LPVC2)
●
Enhanced Universal Trunk card (EUTC)
●
Operator Line Interface card (OLIC2)
●
Quad digital trunk cards
●
Digital Signal Processor -2 (DSP2)
●
Internet Protocol Telephony Card (IPTC)
Enhanced Network Bus Controller (ENBC)
The ENBC card is the CPU for the digital switch. It runs the switch generic software, which
controls all aspects and operation of the switch.
Maintenance and Troubleshooting Guide
March 2008
21
!
WARNING:
Never pull or reinsert the ENBC card in a slot while the switch is powered up.
Never pull or reinsert the NBC cable or SCSI cable while the switch is powered
up. This may cause severe damage to the ENBC.
!
WARNING:
The only method for powering off the card cage (and therefore the ENBC Card) is
to power off the UPS or disconnect the digital switch Power Supply from the
power source. The digital switch does not have a built-in on/off switch.
WARNING:
WARNING:
LED indicators
Red
Yellow
Green
Status
OFF
OFF
OFF
Normal operation
OFF
ON
OFF
Indicates Minor Alarm condition in
system. Look at Card and System
Alarm screens to determine details
of alarm condition.
ON
OFF
OFF
Indicates Major Alarm condition in
system. Look at Card and System
Alarm screens to determine details
of alarm condition.
ON
ON
OFF
Indicates ENBC is being
reinitialized, ENBC software
download, and self-test.
Solutions for red or yellow LED
Note:
Note:
Note:
A major alarm anywhere in the switch causes the red LED on the ENBC card to
light, even if there is no problem with the ENBC card.
Note:
A minor alarm anywhere in the switch causes the yellow LED on the ENBC card
to light, even if there is no problem with the ENBC card.
Follow these steps to resolve the problem:
1. Check the system log file for error messages related to all cards other than the ENBC.
2. If any error messages exist, troubleshoot those cards.
22
Maintenance and Troubleshooting Guide
March 2008
3. Check for alarms on all cards other than the ENBC card. If alarms exist, troubleshoot
those alarms.
4. If a red or yellow LED is still lit on the ENBC card, go to step 5.
5. Check the system log file for error messages related to the ENBC.
6. Reboot the switch. If the alarm LED remains lit, proceed to the next step.
7. Power down the switch and reseat the ENBC in slot 1.
8. Restart the switch. If the alarm LED remains lit, proceed to the next step.
9. Check the NBC cable behind slot 1 and connected to I/O Transition Module for a secure fit.
10. If required, power down the switch and reseat the cable.
11. Restart the switch. If the alarm LED remains lit, proceed to the next step.
12. Power down the switch and replace the ENBC.
13. Restart the switch. If the alarm LED remains lit, proceed to the next step.
14. Power down the switch and replace the NBC cable.
Large Port Voice Card (LPVC2)
The standard LPVC2 card carries 16 Mbytes of memory, and provides approximately 35
minutes of local voice storage. A larger version of the LPVC2 is an available option that carries
32 Mbytes of memory for 70 minutes of storage capacity. The LPVC2 has a direct connection to
the ENBC I/O Transition Module over a SCSI bus. The connection enables the card to store and
retrieve voice messages to and from the hard drive.
Maintenance and Troubleshooting Guide
March 2008
23
!
WARNING:
WARNING:
Never remove, reseat or replace the SCSI cable behind the LPVC while the
ENBC or card cage are powered on.
LED indicators
Red
Yellow
Green
Status
OFF
OFF
OFF
Normal operation
OFF
ON
OFF
Indicates Minor Alarm condition in
system. Look at Card Alarm screen
to determine details of alarm
condition.
ON
OFF
OFF
Indicates Major Alarm condition in
system. Look at Card Alarm screen
to determine details of alarm
condition.
FLASH
FLASH
FLASH
All flashing in sequence indicates
the LPVC is receiving a download
from Avaya Proactive Contact.
ON
ON
ON
LPVC self test. Should only last 60
or so seconds.
OFF
OFF
ON
Card is in Stand-by, Diagnostic, or
Out of service mode.
Solutions for red or yellow LED
Follow these steps to resolve the problem:
1. Check system log file for error messages related to the card in slot 3.
2. Check the Card Alarm screen in the Card Maintenance menu.
3. Try activating the LPVC via the Card Maintenance menu. If the LED remains lit, proceed to
the next step.
4. Reseat the LPVC card.
5. Restart the system. If the LED remains lit, proceed to the next step.
6. Power down the system and reseat the SCSI cable at both ends.
7. Restart the system. If the LED remains lit, proceed to the next step.
24
Maintenance and Troubleshooting Guide
March 2008
8. Replace the LPVC card.
Enhanced Universal Trunk card (EUTC)
The EUTC is a 16 port, 2-wire, analog card that can operate in Loop Start mode or Ground Start
mode. Use the switch menus to configure loop or ground start. This card is rarely used.
LED indicators
Red
Yellow
Green
Status
OFF
OFF
OFF
Normal operation
ON
OFF
OFF
The EUTC has failed the self test.
OFF
ON
OFF
The ENBC is unable to
communicate with the EUTC and
has stopped polling the EUTC.
OFF
OFF
ON
The EUTC has not been added to
the database or has been taken out
of service via the Card
Maintenance screen.
Solutions
The LEDS do not register phone line issues. Test phone lines with either the driver or the
swit utility.
If the red LED is lit, replace the EUTC.
Maintenance and Troubleshooting Guide
March 2008
25
Operator Line Interface card (OLIC2)
The OLIC2 provides 24 4-wire headset connections for use by agents on the dialer. This
function is seldom used, as most customers find the digital agent connections, dial-up and
dial-back, to be far more efficient and workable. However, in certain environments, where no
PBX is present or no agents are used on the PBX, a direct connection for the agents can be
utilized. The OLIC2 is specifically designed for this environment.
LED indicators
Red
Yellow
Green
Status
OFF
OFF
OFF
Normal operation
ON
ON
ON
OLIC self-test in progress.
ON
OFF
OFF
The OLIC2 has failed the self test
on one or more ports.
OFF
ON
OFF
The ENBC is unable to
communicate with the OLIC2 and
has stopped polling the OLIC2.
OFF
OFF
ON
The OLIC2 has not been added to
the database or has been taken out
of service via the Card
Maintenance screen.
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the OLIC2 card
and the OLIC MDF adapter.
2. If there is a minor or major alarm on the OLIC card, on the main switch menu select C > G.
26
Maintenance and Troubleshooting Guide
March 2008
3. Use the Maintenance Menu to reset the card.
4. Check Maintenance Menu > Card Maintenance for unavailable ports that are
marked with a P.
5. If a port is marked with a P, check the cabling for that port. If the problem persists, go to the
next step.
6. If there is no specific alarm on the OLIC card, the problem may be in the OLIC port or in
the wiring from the card to the agent’s workstation. To determine if the OLIC port is
functioning correctly:
a. Remove the cable from the OLIC adapter for this port.
Note:
There are two cables which connect to each OLIC adapter. The top cable is for
ports 1-12.Tthe lower cable is for ports 13-24.
Note:
b. To cause the OLIC card to run its self-test, reseat the card. The self-test tests each of
the 24 ports. It sends a signal out on the ear pair and expects to receive the same
signal on the mouth pair.
c. If the OLIC card resets with no port failures, the problem is with one of the following:
●
Cabling from the OLIC adapter to the workstation
●
Headset equipment at the workstation
●
OLIC adapter
d. If the OLIC card restores with port failures such as Code 4, Code 5, or Code6 on a
specific port with no cable attached, then the problem is the OLIC card, go to step 9.
7. Shut down the digital switch and reboot the system. If the problem persists, go to the next
step.
8. Reseat the OLIC card. If the problem persists, go to the next step.
9. Swap the OLIC 2 card with a new OLIC 2.
Quad digital trunk cards
The Quad Digital Trunk Cards (QDTC) are a group of six similar cards that provide all the
versions of digital trunking for the switch. Each version of this card is built on a common circuit
board. Each card has four separate digital trunking spans of the type supported by the card. The
six digital trunking cards are:
●
Quad T1 (QT1)
●
Quad T1 primary rate interface card (QT1-PRI)
●
Quad E1-Channel Associated Signaling 120 Ohm (QE1-CAS 120)
Maintenance and Troubleshooting Guide
March 2008
27
●
Quad E1Primary Rate ISDN 120 Ohm (QE1-PRI 120)
●
Quad E1-Channel Associated Signaling 75 Ohm (QE1-CAS 75)
●
Quad E1- Primary Rate ISDN 75 Ohm (QE1-PRI 75)
Quad T1 (QT1)
The card provides spans that comply to the original T1 specification for North America (ANSI
T1.105). Each digital span includes four wires, two for the receive direction and two for the
transmit direction. There are 24 pulse code modulated (PCM) time slots on the T1 span that
provide 24 voice channels, with signaling provided by using low order bits in the voice channels,
Robbed-Bit Signaling, in such a way that the overall voice quality is not significantly affected.
LED indicators
Red
Yellow
Green
Status
ON
ON
ON
Self-test in progress.
FLASH
FL:ASH
FLASH
QT1.dwn file being downloaded.
OFF
OFF
OFF
Normal operation
ON
OFF
OFF
Carrier loss, OOF detected.
OFF
ON
OFF
Remote alarm detected.
OFF
OFF
ON
Waiting for the ENBC card to
initialize communications.
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QT1 card.
2. Check Maintenance Menu > Card Alarm for alarms.
28
Maintenance and Troubleshooting Guide
March 2008
3. Us the Maintenance Menu > Card Maintenance to reset the specific T1 causing the
alarm.
4. Shut down the digital switch and reseat the T1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the T1 provider to reset the T1 and check cable connections. If the problem
persists, go to the next step.
7. Try reconnecting the T1 cable to a different slot. If the trouble follows the cable, work with
the far end of the T1 to resolve. If the trouble remains with the slot, replace the QT1 or the
QT1 trunk adapter or both cards if necessary.
Quad T1 primary rate interface card (QT1-PRI)
The QT1-PRI card uses the same 24 channel format as the QT1 with one voice channel for use
as a D-channel for signaling. This provides the 23B+D service that consists of 23 Bearer, or
voice channels, and one Data, or signaling channel. This card is NFAS compatible.
LED indicators
Red
Yellow
Green
Status
ON
ON
ON
Self-test in progress.
FLASH
FL:ASH
FLASH
QT1.dwn file being downloaded.
OFF
OFF
OFF
Normal operation
ON
OFF
OFF
Carrier loss, OOF detected.
OFF
ON
OFF
Remote alarm detected.
OFF
OFF
ON
Waiting for the ENBC card to
initialize communications.
Maintenance and Troubleshooting Guide
March 2008
29
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QT1-PRI card.
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific T1 causing the
alarm.
4. Shut down the digital switch and reseat the T1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the T1 provider to reset the T1 and check cable connections. If the problem
persists, go to the next step.
7. Try reconnecting the T1 cable to a different slot. If the trouble follows the cable, work with
the far end of the T1 to resolve. If the trouble remains with the slot, replace the QT1-PRI or
the trunk adapter or both cards if necessary.
Quad E1-Channel Associated Signaling 120 Ohm (QE1-CAS 120)
The QE1-CAS 120 card uses the E1-CAS digital transmission that is defined in ITU G.703 and
Q.421. Each digital span includes four wires, two for the receive direction and two for the
transmit direction. It uses 32 time slots to carry one framing channel, one signaling channel, and
30 PCM voice channels. The eight bits in the signaling channel are shared over time to provide
signaling bits for each voice channel to indicate things like off-hook, answer, clearing, and more.
The 120 Ohm designation signifies that the wire interface for these spans is twisted pair cabling,
which has an approximate impedance of 120 ohms at 2 MHz.
LED indicators
30
Red
Yellow
Green
Status
ON
ON
ON
Self-test in progress.
FLASH
FL:ASH
FLASH
QE1.dwn file being downloaded.
Maintenance and Troubleshooting Guide
March 2008
OFF
OFF
OFF
Normal operation
ON
OFF
OFF
Carrier loss, OOF detected.
OFF
ON
OFF
Remote alarm detected.
OFF
OFF
ON
Waiting for the ENBC card to
initialize communications.
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QE1-CAS 120
card.
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific E1 causing the
alarm.
4. Shut down the digital switch and reseat the E1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the E1 provider to reset the E1 and check cable connections. If the problem
persists, go to the next step.
7. Try reconnecting the E1 cable to a different slot. If the trouble follows the cable, work with
the far end of the E1 to resolve. If the trouble remains with the slot, replace the QE1-CAS
120 or the trunk adapter or both cards if necessary.
Quad E1Primary Rate ISDN 120 Ohm (QE1-PRI 120)
The QE1-PRI 120 card uses the E1-PRI digital transmission which has the same physical and
electrical facilities as E1-CAS, with the E1-CAS signaling channel replaced with a D-channel in
the ISDN version. Otherwise the spans look the same. This scheme gives 30B+D capabilities,
for an increase of 7 voice channels over the T1-PRI. The QE1-PRI 120 card uses the 120 ohm
connection method on twisted pair cabling.
Maintenance and Troubleshooting Guide
March 2008
31
LED indicators
Red
Yellow
Green
Status
ON
ON
ON
Self-test in progress.
FLASH
FL:ASH
FLASH
qe1pri.dwn file being downloaded.
OFF
OFF
OFF
Normal operation
ON
OFF
OFF
Carrier loss, OOF detected.
OFF
ON
OFF
Remote alarm detected.
OFF
OFF
ON
Waiting for the ENBC card to
initialize communications.
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QE1-PRI 120
card.
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific E1 causing the
alarm.
4. Shut down the digital switch and reseat the E1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the E1 provider to reset the E1 and check cable connections. If the problem
persists, go to the next step.
7. Try reconnecting the E1 cable to a different slot. If the trouble follows the cable, work with
the far end of the E1 to resolve. If the trouble remains with the slot, replace the QE1-PRI
120120 or the trunk adapter or both cards if necessary.
32
Maintenance and Troubleshooting Guide
March 2008
Quad E1-Channel Associated Signaling 75 Ohm (QE1-CAS 75)
The 75 ohm version of the QE1-CAS card is similar to the 120 ohm version. However, the 75
ohm version uses two coaxial cables instead of two pairs of twisted wires. The impedance of the
interface is 75 ohms at 2 MHz.
LED indicators
Red
Yellow
Green
Status
ON
ON
ON
Self-test in progress.
FLASH
FL:ASH
FLASH
QE1.dwn file being downloaded.
OFF
OFF
OFF
Normal operation
ON
OFF
OFF
Carrier loss, OOF detected.
OFF
ON
OFF
Remote alarm detected.
OFF
OFF
ON
Waiting for the ENBC card to
initialize communications.
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QE1-CAS 75
card.
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific E1 causing the
alarm.
4. Shut down the digital switch and reseat the E1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
Maintenance and Troubleshooting Guide
March 2008
33
6. Request the E1 provider to reset the E1 and check cable connections. If the problem
persists, go to the next step.
7. Try reconnecting the E1 cable to a different slot. If the trouble follows the cable, work with
the far end of the E1 to resolve. If the trouble remains with the slot, replace the QE1-CAS
75 or the trunk adapter or both cards if necessary.
Quad E1- Primary Rate ISDN 75 Ohm (QE1-PRI 75)
The 75 ohm version of the QE1-PRI card is similar to the 120 ohm version. However, the 75
ohm version uses two coaxial cables, one for transmit and one for receive, instead of two pairs
of twisted wires. The impedance of the interface is 75 ohms at 2 MHz.
LED indicators
Red
Yellow
Green
Status
ON
ON
ON
Self-test in progress.
FLASH
FLASH
FLASH
QE1.dwn file being downloaded.
OFF
OFF
OFF
Normal operation
ON
OFF
OFF
Carrier loss, OOF detected.
OFF
ON
OFF
Remote alarm detected.
OFF
OFF
ON
Waiting for the ENBC card to
initialize communications.
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QE1-PRI 75
card.
34
Maintenance and Troubleshooting Guide
March 2008
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific E1 causing the
alarm.
4. Shut down the digital switch and reseat the E1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the E1 provider to reset the E1 and check cable connections. If the problem
persists, go to the next step.
7. Try reconnecting the E1 cable to a different slot. If the trouble follows the cable, work with
the far end of the E1 to resolve. If the trouble remains with the slot, replace the QE1-PRI
75 or the trunk adapter or both cards if necessary.
Digital Signal Processor -2 (DSP2)
The Digital Signal Processor 2 (DSP2) card accepts up to four of these DSP applications:
●
Call Analysis replaces the Enhanced Call Progress Analyzer (ECPA) and provides real
time analysis of a dialed call.
●
Conference replaces the Enhanced Conference Card (ECC) and has the capability to
conference up to 128 ports together in various combinations.
●
Dual tone multifrequency (DTMF) Receiver replaces the Enhanced DTMF Receiver Card
(EDRC) and provides the capability to receive DTMF tones.
Maintenance and Troubleshooting Guide
March 2008
35
●
Tone Generator replaces the Enhanced Digital Tone Generator (EDTG) and provides tone
outputs for DTMF and MF dialing and other maintenance and switch usage.
●
MFCR2 Transceiver replaces the Enhanced Multi-Frequency Compelled R2 Transceiver
(EMFCR2) and produces and receives R2 dialing tones on the network or PBX.
●
Digital Dialer replaces the Digital Dialer Card (DDC) and provides 192 DTMF/MF dialing
ports.
This card comes in two configurations:
●
DSP2-41 - Has 4 DSP devices and one bank of external RAM installed in each section.
●
DSP2-11 - Has 1 DSP device and one bank of external RAM installed.
The applications that run on the DSP2 card are configured completely within the Digital Switch
menu screens on the Switch Console.
LED indicators
331 HB
Green
DSP HB
Green
Red
Yellow
Green
Status
ON
ON
ON
ON
ON
Reset in progress.
SB
SB
OFF
OFF
OFF
Normal operation
ON
MB
ON
ON
ON
JTAG download
SB
OFF
OFF
OFF
ON
Internal memory test
SB
FB
OFF
OFF
OFF
External memory test
SB
SB
OFF
OFF
ON
Waiting for download
SB
SB
FB
FB
FB
Card download
Note that the 331 HB and DSP HB are not on the front panel. SB stands for slow blink, MB for
medium blink, and FB for fast blink.
36
Maintenance and Troubleshooting Guide
March 2008
LED Error conditions
331 HB
Error
Blink 1
External RAM Bank 0 failure
Blink 2
External RAM Bank 1 failure
Blink 3
External RAM Bank 2 failure
Blink 4
External RAM Bank 3 failure
Blink 5
Internal Block 0 failure
Blink 6
Internal Block 1 failure
Blink 7
Convergence error
Blink 8
External Bank 0 flag missing
Blink 9
Dual port RAM failure
Blink 10
Unexpected interrupt
In all cases where an error occurs, remove the card and return it to customer support with
details on the error that occurred.
Internet Protocol Telephony Card (IPTC)
The IPTC is still in development. This card will provide approximately 100 IP Telephony voice
connections, Voice over Internet Protocol (VoIP). This card is being developed to meet Avaya's
commitment to a future IP connected world. It is based on the DSP2 card design and utilizes
many of the same circuits. At this time, only H.323 signaling is supported, but SIP is on the list
for the future.
Maintenance and Troubleshooting Guide
March 2008
37
LED indicators
38
Red
Yellow
Green
Status
ON
ON
ON
Self-test in progress.
FLASH
FL:ASH
FLASH
IPTC.dwn file being downloaded.
OFF
OFF
OFF
Normal operation
OFF
OFF
ON
Waiting for the ENBC card to
initialize communications.
Maintenance and Troubleshooting Guide
March 2008
Software Maintenance
This section contains the following topics:
●
Understanding backup and restore operations on page 39
●
Using backup and restore commands on page 40
Understanding backup and restore operations
For local backup and restoration capabilities, you must configure an external DDS tape drive, a
third party host, or use the DVD Writer. For more information, see Planning and Prerequisites
for Avaya Proactive Contact and Installing and Configuring Avaya Proactive Contact.
Back up the following files on a regular basis:
●
outbound calling lists
●
inbound calling results
●
call activity statistics
●
system configuration files
●
system data / statistics file
To prevent data loss, Avaya recommends that you follow these guidelines:
●
Keep a minimum of two sets of backup. In each set, keep one backup for each day.
●
Store one backup set away from your site.
●
Store backed up data in a controlled environment. Optimal tape storage environment is
50% relative humidity at 22° C.
●
Replace each DDS tape after 100 uses, approximately two years.
●
Clean the tape drive monthly using a cleaning tape.
●
Replace cleaning tapes after 25 uses.
The standard backup medium is a 4.3 GB DVD. You can also use a 4mm, 90-meter, 2.2 GB
digital data storage (DDS) tape or a 9-track tape if you are planning to use a tape drive.
Maintenance and Troubleshooting Guide
March 2008
39
Using backup and restore commands
This section contains the following topics:
●
Monitor the DAT drive status on page 40
●
Back up the complete system on page 41
●
Back up the system and calling lists on page 42
●
Back up Avaya Proactive Contact system files on page 42
●
Back up system configuration files on page 43
●
Back up system data/stat files on page 44
●
Restore all the data on page 44
●
Restore a file from archive on page 45
●
List/Verify a file in archive on page 46
●
List/Verify archive contents on page 46
●
List archive volume information on page 47
●
Back up all calling lists on page 47
●
Back up a specific calling list on page 48
●
Restore all calling lists on page 48
●
Restore a specific calling list on page 49
●
Back up a database on page 49
●
Restore a database on page 50
Monitor the DAT drive status
You can monitor the tape drive status during backup and restore procedures. There are two
LEDs on the tape drive. The LED on the left is the cassette LED. The LED on the right is the
drive LED. When the system uses the tape drive, both lights flash in different color
combinations.
40
Cassette LED
Color
Drive LED Color
Status
Flashing green
Flashing green
Write-enabled tape loading
or unloading.
Green
Green
Write-enabled tape loaded
and online.
Maintenance and Troubleshooting Guide
March 2008
Cassette LED
Color
Drive LED Color
Status
Flashing amber
Flashing green
Write-protected tape loading
or unloading.
Amber
Green
Write-protected tape loaded
and online.
Green
Flashing green
and amber
Media wear. Replace tape
or clean tape drive.
Amber
Amber
High room humidity. Tape
cannot load or unload.
Flashing amber
Flashing amber
Successful power-on
self-test.
Flashing amber
Amber
Unsuccessful power-on
self-test.
Various options for Backup and Restore
You can use the following for backing up and restoring information on Proactive Contact:
●
DAT 72 USB External Tape Drive
●
DVD Writable
●
A Third Party Host
Back up the complete system
You can back up the entire root file system contents, including the operating system and the
Avaya Proactive Contact system files.
To back up the system:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore
and verify option.
3. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
4. Type 2 and press enter to select Back up complete system.
Maintenance and Troubleshooting Guide
March 2008
41
5. Choose backup media type.
6. After the backup process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
Back up the system and calling lists
You can back up the system and all calling lists.
To back up the system and calling lists:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
3. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
4. Type 3 and press enter to select Back up system and calling list.
5. The system will ask you the following "Back up system and calling lists - Are you sure?".
Type Y for yes and N for no.
6. From ADDITIONAL ENTRY for Back up system and calling lists menu, type
I for Incremental backup or F for Full backup
7. The system will ask you the following "Are above entries correct?". Type Y for yes and N
for no.
8. Choose the backup media type.
9. Follow the onscreen instructions.
10. After the backup process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
Back up Avaya Proactive Contact system files
You can back up the entire system excluding the calling lists (specifically, excluding all data in
the /opt/avaya/pds/xfer/clist directory).
To back up the system files:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
42
Maintenance and Troubleshooting Guide
March 2008
3. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
4. Type 4 and press enter to select Back up system only.
5. The system will ask you the following "Back up system only - Are you sure?". Type Y for
yes and N for no.
6. From ADDITIONAL ENTRY for Back up system only menu, type I for Incremental
backup or F for Full backup
7. The system will ask you the following "Are above entries correct?". Type Y for yes and N
for no.
8. Choose the backup media type.
9. Follow the onscreen instructions.
10. After the backup process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
Back up system configuration files
You can back up all the system configuration files (all files needed to customize a newly
installed system to the customer's specifications).
To back up system configuration files:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
3. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
4. Type 5 and press enter to select Back up system configuration files.
5. The system will ask you the following "Back up system configuration files - Are you sure?".
Type Y for yes and N for no.
6. From ADDITIONAL ENTRY for Back up system configuration files menu,
type I for Incremental backup or F for Full backup
7. The system will ask you the following "Are above entries correct?". Type Y for yes and N
for no.
8. Choose the backup media type.
9. Follow the onscreen instructions.
10. After the backup process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
Maintenance and Troubleshooting Guide
March 2008
43
Back up system data/stat files
You can back up all data files needed to run reports via the PC Analysis tools. Specifically, all
files matching the following patterns:
●
/opt/avaya/pds/lists/*.stat
●
/opt/avaya/pds/lists/history/*.hist
●
/opt/avaya/pds/account/*
If you select any of the above choices, you will next be asked if you want the backup to be
incremental or full. In the case of a full back up, the system backs up all files in the specified
category. In the case of an incremental back up, the system backs up a file only if it has
changed since it was last backed up as part of any full back up.
To back up system data/stat files:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
3. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
4. Type 6 and press enter to select Back up system data/stat files.
5. The system will ask you the following " Back up system data/stat files - Are you sure?".
Type Y for yes and N for no.
6. From ADDITIONAL ENTRY for Back up system data/stat files menu, type I
for Incremental backup or F for Full backup
7. The system will ask you the following "Are above entries correct?". Type Y for yes and N
for no.
8. Choose the backup media type.
9. Follow the onscreen instructions.
10. After the backup process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
Restore all the data
You can restore all files from any backup tape created using the backup menu commands (or
any file created with the UNIX fbackup utility).
44
Maintenance and Troubleshooting Guide
March 2008
To restore all files from a tape:
1. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
3. Type 7 and press enter to select Restore all.
4. The system will ask you the following " Restore all - Are you sure?". Type Y for yes and N
for no.
5. Choose the restore media type.
6. Follow the onscreen instructions.
7. After the restore process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
!
Important:
Important:
You cannot restore files from backup tapes created on earlier versions of the
system.
Restore a file from archive
To restore a file from tape:
1. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
3. Type 8 and press enter to select Restore a file.
4. Enter the full filename in the "ADDITIONAL ENTRY for Restore a file" menu.
5. The system will ask you "Are above entries correct?". Type Y for yes and N for no.
6. Choose the backup media type.
7. Locate the DVD drive / tape drive in the system cabinet. Insert the DVD / DDS tape with
the existing backup files in the drive.
8. Follow the instructions on the screen.
Maintenance and Troubleshooting Guide
March 2008
45
List/Verify a file in archive
To verify a backup file in archive:
1. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
3. Type 9 and press enter to select List/Verify a file in archive.
4. The system will prompt the following " List/Verify a file in archive - Are you sure?". Type Y
for yes and N for no
5. Enter the full filename in the "ADDITIONAL ENTRY for List/Verify a file in archive" menu.
6. The system will ask you "Are above entries correct?". Type Y for yes and N for no.
7. Choose the backup media type.
8. Locate the DVD drive / tape drive in the system cabinet. Insert the DVD / DDS tape with
the existing backup files in the drive.
The system displays the byte count, date, size, and file names on the screen during the
tape verification process.
9. After verifying the tape, follow the unloading instructions on the screen. Type C to return to
the previous menu.
List/Verify archive contents
To verify a backup file on a tape:
1. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
3. Type 10 and press enter to select List/Verify List/Verify archive contents.
4. The system will prompt the following "List/Verify archive contents - Are you sure?". Type Y
for yes and N for no
5. Choose the backup media type.
The system displays the byte count, date, size, and file names on the screen during the
tape verification process.
6. After verifying the archive contents, follow the unloading instructions on the screen.
46
Maintenance and Troubleshooting Guide
March 2008
List archive volume information
You can view the creation information on a backup tape.
To view backup volume information:
1. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local
backup /restore/verify option.
3. Type 11 and press enter to select List archive volume information.
4. The system will prompt the following "List archive volume information - Are you sure?".
Type Y for yes and N for no
5. Choose the backup media type.
6. The system displays the volume information.
7. After verifying the archive volume, follow the unloading instructions on the screen.
!
Important:
Important:
You cannot restore files from backup tapes created on earlier versions of the
system.
Back up all calling lists
You can back up all calling lists currently on the system. Specifically, all files in the directory
/opt/avaya/pds/xfer/clist.
To back up a calling list:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
3. From the Back Up and Restore Menu, type 3 and press enter to select Local
backup up/restore calling lists option.
4. Type 2 and press enter to select Back up all calling lists command.
5. The system will ask you the following "Back up all calling lists - Are you sure?". Type Y for
yes and N for no.
6. Choose the backup media type.
7. Follow the onscreen instructions.
Maintenance and Troubleshooting Guide
March 2008
47
8. After the backup process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
Back up a specific calling list
You can choose a specific calling list from the Item List on the right side of the screen. View
additional files by scrolling down the list in the standard way.
Note:
Note:
The files are listed in alphabetical order, and file names with more than 10
characters are truncated in the displayed list. If a truncated file name is selected,
however, the correct file is selected and backed up.
To back up a specific calling list:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
3. From the Back Up and Restore Menu, type 3 and press enter to select Local
backup up/restore calling lists option.
4. Type 3 and press enter to execute Back up a specific calling list command.
5. Type the item number of the calling list on the right of the command menu that needs to be
backed up and press enter.
6. The system will ask you the following "Back up a specific calling list on item <listname> Are you sure?". Type Y for yes and N for no.
7. Choose the backup media type.
8. Follow the onscreen instructions.
9. After the backup process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
Restore all calling lists
To restore all callings lists from a backup tape:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
48
Maintenance and Troubleshooting Guide
March 2008
3. From the Back Up and Restore Menu, type 3 and press enter to select Local
backup up/restore calling lists option.
4. Type 4 and press enter to execute Restore all calling lists command.
5. The system will ask you the following "Restore all calling lists - Are you sure?". Type Y for
yes and N for no.
6. Choose the backup media type.
7. Follow the onscreen instructions.
Restore a specific calling list
You can restore a single calling list file from tape. This choice is similar to the previous choice
except that the file to be restored must appear in the Item List on the right hand side of the
menu. This command will overwrite the list of the same name currently on the system.
To restore a specific calling list from tape:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
3. From the Back Up and Restore Menu, type 3 and press enter to select Local
backup up/restore calling lists option.
4. Type 5 and press enter to execute Restore a specific calling list command.
5. Type the item number of the calling list on the right of the command menu that needs to be
restored and press enter.
6. The system will ask you the following "Restore a specific calling list on item <listname> Are you sure?". Type Y for yes and N for no.
7. Choose the restore media type.
8. Follow onscreen instructions.
Back up a database
You can back up all database data files and database system files, specifically, all files in the
directory /opt/oracle/oradata.
Maintenance and Troubleshooting Guide
March 2008
49
!
Important:
Important:
Avaya strongly recommends that you execute a database backup when no other
activities (such as dialing) are in progress. During this operation, the control and
monitor functions are unavailable. This operation is also time and resource
intensive, which can slow system activity.
To back up a database:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in
the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
3. From the Back Up and Restore Menu, type 4 and press enter to select Local
backup up/restore database option.
4. Type 3 and press enter to execute Back up a specific calling list command.
5. Type 2 and press enter to select Back up the database option.
6. The system will ask you the following " Back up the database - Are you sure?". Type Y for
yes and N for no.
7. Choose the backup media type.
8. Follow the onscreen instructions.
9. After the backup process is completed, store the backup in antistatic environment at the
proper temperature and humidity.
Restore a database
You can restore database data files and database system files, specifically, all files in the
directory /opt/oracle/oradata.
!
Important:
Important:
Avaya strongly recommends that you execute a database restore when no other
activities (such as dialing) are in progress. During this operation, the control and
monitor functions are unavailable. This operation is also time and resource
intensive, which can slow system activity.
To restore a database:
1. Locate the DVD drive / tape drive in the system cabinet. Insert the backup DVD / DDS tape
in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up,
restore and verify option.
50
Maintenance and Troubleshooting Guide
March 2008
3. From the Back Up and Restore Menu, type 4 and press enter to select Local
backup up/restore database option.
4. Type 3 and press enter to execute Restore the database command.
5. The system will ask you the following " Restore the database - Are you sure?". Type Y for
yes and N for no.
6. Choose the backup media type.
7. Follow the onscreen instructions.
Maintenance and Troubleshooting Guide
March 2008
51
52
Maintenance and Troubleshooting Guide
March 2008
Error messages and message type
Message Type
Error
Number
Error Message
GLOB
E00500
%s - Caught signal %d (%s)
GLOB
E00501
%s - Caught signal %d (%s) and terminated
GLOB
E00502
%s - Failed to allocate Memory
GLOB
E00503
%s - Pattern error: %s
GLOB
E00504
%s - Bad argument
GLOB
E00505
%s - Invalid time format
GLOB
E00506
%s - Invalid date format
GLOB
E00507
%s - Failed to retrieve environmental variable %s
GLOB
E00508
%s - Entry %s missing/invalid in master.cfg file
GLOB
E00509
%s - Entry %s missing/invalid in %s file
GLOB
E00510
%s - Entry %s is incompatible in length
GLOB
E00511
%s - Failed to process file %s
GLOB
E00512
%s - File name %s too long
GLOB
E00513
%s - Invalid file name %s
GLOB
E00514
%s - File name %s already exist
GLOB
E00515
%s - Failed to open file %s
GLOB
E00516
%s - Failed to close file %s
GLOB
E00517
%s - Failed to create file %s
GLOB
E00518
%s - Failed to read from file %s
GLOB
E00519
%s - v_dialer\dialer\src\dbconst\readtape.c %s
GLOB
E00520
%s - Failed to lock file %s
GLOB
E00521
%s - Failed to unlock file %s
GLOB
E00522
%s - Failed to attach to shm, err=%d, id=%d
Maintenance and Troubleshooting Guide
March 2008
53
54
GLOB
E00523
%s - Failed to detach from shm, err=%d, id=%d
GLOB
E00524
%s - Failed to remove shm, err=%d, id=%d
GLOB
E00525
%s - Failed to get msgq, err=%d, id=%d
GLOB
E00526
%s - Failed to send msg, err=%d, id=%d
GLOB
E00527
%s - Failed to recv msg, err=%d, id=%d
GLOB
E00528
%s - Failed to remove msgq, err=%d, id=%d
GLOB
E00529
%s - Failed to invoke function %s, err=%d
GLOB
E00530
%s - Failed to open calling list %s
GLOB
E00531
%s - Failed to read calling list definition %s
GLOB
E00532
Field %s not defined in calling list %s
GLOB
E00533
Field %s has incorrect length
GLOB
E00534
Not a calling list
GLOB
E00535
%s - No space on file system
GLOB
E00536
%s - Failed to initialize keyboard
GLOB
E00537
%s - Failed to initialize screen environment
GLOB
E00538
%s - Failed to setup command keys
GLOB
E00539
%s - Failed to create %s window
GLOB
E00540
%s - Failed to create window pointer
GLOB
E00541
%s - Failed to open keys file %s
GLOB
E00542
%s - Field %s not defined in calling list %s
GLOB
E00543
Field %s not defined in calling list %s (WARNING)
GLOB
E00544
%s - Invalid Pattern '%s'
GLOB
E00545
%s:fail to send %s to %s
GLOB
E00546
Failed to create directory '%s' -- errno %d: %s
GLOB
E00547
Non-directory '%s' in directory path '%s'
GLOB
E00548
Missing/invalid entry for %s in file %s
GLOB
E00549
%s operation failed, file '%s' -- errno %d: %s
GLOB
E00550
Invalid entry for %s in file %s near '%s'
GLOB
E00551
Assertion failed (expression false), aborting
Maintenance and Troubleshooting Guide
March 2008
GLOB
E00552
Failed to open directory %d
GLOB
E00553
File '%s' does not exist
GLOB
E00554
%s operation failed
GLOB
E00555
%s - %s
GLOB
E00556
File '%s' exists, but is not readable by user %s
GLOB
E00557
File '%s' exists, but is not writable by user %s
LIBDSI
E10000
Exceeded max number (%d) of associate calling lists
LIBDSI
E10001
Not an associate List
LIBDSI
E10002
Not an associate select file: %s
LIBDSI
E10003
Associate list name missing
LIBDSI
E10004
Associate list name not in assoc.cfg file
LIBDSI
E10005
%s - Creation time for %s is incorrect
LIBDSI
E10006
Failed to change master clist: %s
LIBDSI
E10007
Invalid logical connector at line %d
LIBDSI
E10008
Missing field name or value at line %d
LIBDSI
E10009
Group may not begin with no selection
LIBDSI
E10010
Gap found between select fields within group
LIBDSI
E10011
Field name not found at line %d
LIBDSI
E10012
Pattern error at line %d: %s
LIBDSI
E10013
can't find service entry in /etc/services, errno=%d
LIBDSI
E10014
socket call failed, errno=%d
LIBDSI
E10015
Unable to bind to local address, errno=%d
LIBDSI
E10016
Unable to setup listen on socket, errno=%d
LIBDSI
E10017
Unable to accept connection on socket, errno=%d
LIBDSI
E10018
Unable to connect to socket, errno=%d
LIBDSI
E10019
Unable to send data to socket %d, errno=%d
LIBDSI
E10200
Unequal phone number field lengths in file %s
LIBDSI
E10201
Invalid line selection
LIBDSI
E10600
Failed to allocate memory
Maintenance and Troubleshooting Guide
March 2008
55
56
LIBDSI
E10601
Invalid usage
LIBDSI
E10602
Invalid job name
LIBDSI
E10603
Failed to open edit file
LIBDSI
E10604
No editable line in job file
LIBDSI
E10605
Job file in use
LIBDSI
E10606
Wrong job for verification editor
LIBDSI
E10607
Required field not filled in
LIBDSI
E10608
HUNTGRP format error
LIBDSI
E10609
No HUNTGRP setting
LIBDSI
E10610
No Inbound jobs allowed
LIBDSI
E10611
Invalid number of reserve inbound line
LIBDSI
E10612
Script label for answer missing/invalid
LIBDSI
E10613
Failed to read inbound calling list
LIBDSI
E10614
Failed to read associated calling list
LIBDSI
E10615
Failed to read inbound screen file
LIBDSI
E10616
Failed to read inbound screen map
LIBDSI
E10617
Failed to read multiple screen
LIBDSI
E10618
Failed to read multiple screen map
LIBDSI
E10619
Failed to read associated screen
LIBDSI
E10620
Failed to read associated screen map
LIBDSI
E10621
Failed to read outbound list
LIBDSI
E10622
Failed to read outbound screen
LIBDSI
E10623
Failed to read outbound map
LIBDSI
E10624
Failed to read calling script
LIBDSI
E10625
Failed to read key file
LIBDSI
E10626
Failed to match associated field
LIBDSI
E10627
Failed to process data transfer field
LIBDSI
E10628
Failed to process associated selection
LIBDSI
E10629
Selection list not available for use
Maintenance and Troubleshooting Guide
March 2008
LIBDSI
E10630
STATUSFLAG field missing
LIBDSI
E10631
CODE field missing
LIBDSI
E10632
DTE field missing
LIBDSI
E10633
TME field missing
LIBDSI
E10634
Invalid start or stop time format
LIBDSI
E10635
Invalid Hit Rate
LIBDSI
E10636
Invalid Expert Calling Ratio
LIBDSI
E10637
Invalid call completion code for Quota Value
LIBDSI
E10638
Invalid quota value
LIBDSI
E10639
Invalid paired phone count/type
LIBDSI
E10640
Invalid number of phone lines
LIBDSI
E10641
Odd number of phone lines specified
LIBDSI
E10642
Invalid phone type specified
LIBDSI
E10643
Failed to initialize call strategy
LIBDSI
E10644
Failed to read call strategy
LIBDSI
E10645
Failed to verify call strategy
LIBDSI
E10646
The specified job already running
LIBDSI
E10648
Non-OP completion code specified for Quota setting
LIBDSI
E10649
Failed to find linked job file
LIBDSI
E10650
Linking between virtual agent jobs and non-virtual
jobs is not permitted
LIBDSI
E10651
Sales verification job linking is not permitted
LIBDSI
E10652
Job linking is not permitted
LIBDSI
E10653
Invalid call completion code for TRANSTAT
LIBDSI
E10654
Selection list for job not found
LIBDSI
E10655
No verification selection list ready for job
LIBDSI
E10656
Selection list not created with this calling list
LIBDSI
E10657
missing or invalid script label for call
LIBDSI
E10658
Failed to open script file for IVR ID
Maintenance and Troubleshooting Guide
March 2008
57
58
LIBDSI
E10659
IVR script name not specified; required if IVR ID
specified
LIBDSI
E10660
Unable to find script name in script file for IVR ID
LIBDSI
E10661
remote list use not permitted
LIBDSI
E10662
Sales verification or managed dialing must have
agents
LIBDSI
E10663
Managed dialing is not permitted with sales
verification or inbound
LIBDSI
E10664
Virtual agents cannot select a specific unit to log in to
LIBDSI
E10665
Sales verification is not permitted with unit work lists
LIBDSI
E10666
Sales verification is not permitted with inbound
LIBDSI
E10667
Selecting unit to log in to is not permitted with
inbound-only job
LIBDSI
E10800
Not an error
LIBDSI
E10801
Not an open file descriptor
LIBDSI
E10802
Failed to open file
LIBDSI
E10803
Failed to close file
LIBDSI
E10804
Failed to lock record
LIBDSI
E10805
Failed to unlock record
LIBDSI
E10806
Failed to read file header
LIBDSI
E10807
Failed to write file header
LIBDSI
E10808
Failed to read record
LIBDSI
E10809
Failed to write record
LIBDSI
E10810
Failed to allocate CLSTAT table
LIBDSI
E10811
Failed to get record totals
LIBDSI
E10812
Invalid operation code
LIBDSI
E10813
Failed to read file dictionary
LIBDSI
E10814
Failed to write file dictionary
LIBDSI
E10815
Failed to create file
LIBDSI
E10816
Failed to access file
LIBDSI
E10817
Unconverted to year 2000
Maintenance and Troubleshooting Guide
March 2008
LIBDSI
E10818
Unable to connect to listserver
LIBDSI
E10819
XFD overflow (no XFD slots available)
LIBDSI
E10820
Socket read error
LIBDSI
E10821
Socket write error
LIBDSI
E10822
Tag value incorrect - message alignment/framing
error
LIBDSI
E10823
File is open for reading only
LIBDSI
E10824
File is open for writing only
LIBDSI
E10850
Unable to open list '%s'
LIBDSI
E10851
gethostbyname ('%s') failed
LIBDSI
E10852
socket () failed
LIBDSI
E10853
connect (conn_fd=%d) failed (is listserver running on
host '%s'?)
LIBDSI
E10854
_LcCreateXfd () failed
LIBDSI
E10855
Write error -- wrote %d != expected %d
LIBDSI
E10856
clstat (%d) failed
LIBDSI
E10857
clrddict (%d) failed
LIBDSI
E10858
getservbyname () failed -- using default LSERVPORT
value (%d)
LIBDSI
E10859
Bad file descriptor (%d)
LIBDSI
E10860
File corruption or record size mismatch detected in
calling list %s; fd=%d
LIBDSI
E10861
Failed to remove file %s
LIBDSI
E10900
Error: Value: <%s> not in master.cfg
LIBDSI
E11000
Error: Recall attempt #%d (%s) can't be less than %d
seconds
LIBDSI
E11001
Recall (%s) attempts can't exceed %d
LIBDSI
E11002
Invalid recall code: %s
LIBDSI
E11003
Failed to determine max number of phones
LIBDSI
E11004
Field value missing
LIBDSI
E11005
Gap found between selection criteria lines
Maintenance and Troubleshooting Guide
March 2008
59
60
LIBDSI
E11006
Extra ',' found
LIBDSI
E11007
Invalid phone: %s
LIBDSI
E11008
Invalid field name: %s
LIBDSI
E11009
Invalid field value: %s
LIBDSI
E11010
Invalid logical connector: %s
LIBDSI
E11011
Invalid time zone letter: %c
LIBDSI
E11012
Invalid completion code: %s
LIBDSI
E11013
Invalid ring count: %s. Must be 1 - %d
LIBDSI
E11014
Invalid call detection mode: %s
LIBDSI
E11015
Error: Recall attempt #%d (%s) can't be less than %d
minutes
LIBDSI
E12000
File %s busy, try again later
LIBDSI
E12100
Molocale - Unknown language name %s
LIBDSI
E12101
Molocale - Failed to set locale %s errno=%d
LIBDSI
E12150
PVRS - Failed to initialize %s
LIBDSI
E12151
Hash key field is not defined in %s
LIBDSI
E12152
No Previous Record
LIBDSI
E12153
No More Record
LIBDSI
E12154
Failed to Load Record
LIBDSI
E12155
Record Currently In Use
LIBDSI
E12156
No Record Found
LIBDSI
E12200
Attempt to read hidfile without lock
LIBDSI
E12201
Username %s exceeds %d characters in length
LIBDSI
E12202
%s - Failed to lock file %s, errno(%d)
LIBDSI
E12203
%s - Failed to unlock file %s, errno(%d)
LIBDSI
E12400
tget returned errno %d raising signal %d
LIBDSI
E12600
Calling list %s not in shared memory
LIBDSI
E12601
Calling list field count not match
LIBDSI
E12800
Failed to find screen %s
Maintenance and Troubleshooting Guide
March 2008
LIBDSI
E13000
IPC - Invalid input argument
LIBDSI
E13001
IPC - Invalid ipc entry
LIBDSI
E13002
IPC - Invalid ipc name
LIBDSI
E13003
IPC - Invalid ipc number %d
LIBDSI
E13004
Warning: CFRM message truncated
LIBDSI
E13005
Timed out waiting for %s confirmation
LIBDSI
E13006
Response message too long!
LIBDSI
E13007
IPC - Failed to open opmon message queue
LIBDSI
E13008
%s - Failed on semaphore removal, err=%d key=%d
LIBDSI
E13009
%s - Failed on semaphore operation, err(%d) key =
%d code = %d
LIBDSI
E13010
%s - Accessing bad semaphore
LIBDSI
E13011
%s - Failed to open semaphore, err(%d)
LIBDSI
E13200
Headset value (%s, %d) out of bound
LIBDSI
E13201
Headset %d not specified in %s file
LIBDSI
E13400
Missing or invalid YES/NO field
LIBDSI
E13401
Missing or invalid length
LIBDSI
E13402
Missing prefix
LIBDSI
E13403
Missing line type
LIBDSI
E13404
Missing or invalid num of chars to strip
LIBDSI
E13405
Missing prefix
LIBDSI
E13406
Missing suffix
LIBDSI
E13407
Duplicate ALL phone numbers specification
LIBDSI
E13408
Phone number too long
LIBDSI
E13409
Dial phone number too long
LIBDSI
E13410
Missing std to dial phone number format
LIBDSI
E13411
Invalid use of ALL phone numbers specification
LIBDSI
E13412
Missing phone numbers
LIBDSI
E13600
Report failed, system out of space
Maintenance and Troubleshooting Guide
March 2008
61
62
LIBDSI
E13800
Invalid Headset Number (%d, %s)
LIBDSI
E13801
Headset port no. %d out of range (1-%d)
LIBDSI
E13802
Normal trunk port no. %d out of range (1-%d)
LIBDSI
E13803
Invalid normal trunk equip no %d
LIBDSI
E13804
Invalid normal trunk group no %d
LIBDSI
E13805
Invalid transfer trunk group no %d
LIBDSI
E13806
Failed to determine switch type
LIBDSI
E13807
Failed to process line (%s)
LIBDSI
E14000
Invalid timezone from GMT
LIBDSI
E14001
Invalid time format at line %d in file %s
LIBDSI
E14200
Missing delay specification
LIBDSI
E14201
Missing or invalid low range
LIBDSI
E14202
Invalid range character
LIBDSI
E14203
Invalid high range
LIBDSI
E14204
Invalid min delay
LIBDSI
E14205
Missing completion code
LIBDSI
E14206
Invalid completion code
LIBDSI
E14207
Range does not come after previous range
LIBDSI
E14208
Missing limit
LIBDSI
E14209
Missing or invalid YES/NO field
LIBDSI
E14210
Missing time zone specification for country %d
LIBDSI
E14211
Missing or invalid time zone designation
LIBDSI
E14212
Missing reject phone number pattern
LIBDSI
E14213
Invalid reject phone number pattern
LIBDSI
E14214
Duplicate country specified
LIBDSI
E14215
Invalid answer delay time
LIBDSI
E14216
Invalid DAA type
LIBDSI
E14217
Invalid VM2 locale code
LIBDSI
E14218
Invalid phone number length
Maintenance and Troubleshooting Guide
March 2008
LIBDSI
E14219
Rejected phone number (L%d)
LIBDSI
E14220
Cannot find time zone for phone number
LIBDSI
E14221
Invalid offhook retry delay
LIBDSI
E14222
Invalid wait limit
LIBDSI
E14400
Unknown select file %s
LIBDSI
E14401
Unknown call completion code %s
LIBDSI
E14402
No call completion codes selected
LIBDSI
E14404
Missing field name or value at selection entry %d
LIBDSI
E14405
Group may not begin with no selection
LIBDSI
E14406
Gap found between select fields within group
LIBDSI
E14407
Field name not found at selection entry %d
LIBDSI
E14408
Pattern error at selection entry %d: %s
LIBDSI
E14409
Unit Control - Invalid memory slot position
LIBDSI
E14410
Unit Control - Failed to attach to data segment
LIBTCAP
E14800
Termcap entry larger than buffer size
LIBTCAP
E14801
Invalid termcap entry format
LIBTCAP
E14802
'tc' entries exceed maximum allowed
LIBTCAP
E14900
Terminal type %s not found in %s
LIBTCAP
E14901
Default terminal type vt100 not found in %s
LIBUI
E15200
No summary information available
LIBUI
E15201
Invalid field type
LIBUI
E15202
Invalid value, Must be %s
LIBUI
E15203
Sorry, command not allowed inside editor
LIBUI
E15204
%s - Menubar '%s' already exists.
LIBUI
E15205
%s - Menubar '%s' not found.
LIBDSI
E15400
%s:new_bsrch - Memory allocation (%d bytes) failed,
loc %d
LIBDSI
E15401
%s:new_bsrch - Bad value in new_bsrch
(cl_name=%s cl_fd=%d, cl_keyname=%s
init_type=%c pgmname=%s log_type=%d
log_file=%s)
Maintenance and Troubleshooting Guide
March 2008
63
64
LIBDSI
E15402
%s:new_bsrch - List recno %d locked-skipping;
LIBDSI
E15403
%s:new_bsrch - List recno %d locked-aborting;
LIBDSI
E15404
%s:new_bsrch - Bad calling list record parameter(s):
keylen=%d reclen=%d nrecs=%d
LIBDSI
E15420
%s:new_hsrch - Memory allocation (%d bytes) failed,
loc %d
LIBDSI
E15421
%s:new_hsrch - Unable to open hash file for %s
LIBDSI
E15422
%s:new_hsrch - Missing key_field entry in hash file
%s
LIBDSI
E15424
%s:new_hsrch - Bad calling list record parameter(s):
keylen=%d reclen=%d
LIBUTIL
E16000
Missing or invalid country code
LIBUTIL
E16100
Line too long
LIBUTIL
E16101
Missing label
LIBUTIL
E16102
Invalid label on line
LIBUTIL
E16400
Range not properly nested
LIBUTIL
E16401
Prefix falls on a range's border
LIBUTIL
E16402
Range border falls on a prefix
LIBUTIL
E16403
Range straddles previous range
LIBUTIL
E16404
Prefix has the same value as a shorter prefix
LIBUTIL
E16405
Same prefix is already specified
LIBUTIL
E16406
Prefix has the same value as a longer prefix
LIBUTIL
E16407
Missing prefix
LIBUTIL
E16408
Invalid character in prefix
LIBUTIL
E16409
Low range has fewer digits than high
LIBUTIL
E16410
Range borders are out of order
LIBUTIL
E16411
Bad argument in ptree
LIBUTIL
E16500
Hash_get (%x, %s, %d) failed due to too many
probes
LIBUTIL
E16501
Requested size %d is too large -- Max hash table
slots currently supported is %d
LIBUTIL
E16600
Pattern '%s': Expected numerical lval, found '%s'
Maintenance and Troubleshooting Guide
March 2008
LIBUTIL
E16601
Pattern '%s': Expected numerical rval, found '%s'
LIBUTIL
E16602
Pattern '%s': lval > rval (%g > %g)
LIBUTIL
E16603
Pattern '%s': Expected hyphen, list separator, or end
of pattern; found '%c'
LIBUTIL
E16604
Pattern '%s': Unexpected end of numerical
comparison
LIBUTIL
E16605
Pattern '%s': Pattern too large
LIBUTIL
E16606
Pattern '%s': Bad or missing DATEFORM parameter
in master.cfg
LIBUTIL
E16607
Pattern '%s': Bad format for date comparison
LIBUTIL
E16608
Pattern '%s': Bad format for time comparison
LIBUTIL
E16609
Pattern '%s': Bad format for relative date comparison
LIBUTIL
E16610
Pattern '%s': Undefined backslashed character '%c'
LIBUTIL
E16611
Pattern '%s': Unknown pattern type '%c' specified
LIBUTIL
E16612
Pattern '%s': Failed to compile - use explicit pattern
syntax for more details
LIBUTIL
E16620
Unable to compare - previous pattern failed
compilation - '%s'
LIBUTIL
E16621
No compiled pattern to compare against for string
'%s'
LIBUTIL
E16800
Undefined func call: %s
LIBUTIL
E16900
EXECPROG:Unexpected exit from waitpid()
returning -1:errno=%d:pid=%d,child=%d
LIBUTIL
E16901
EXECPROG:not returning from child
process:pid=%d,child=%d
LIBUTIL
E16902
EXECPROG:Exit(%d) wait(pid=%d)
LIBUTIL
E16903
EXECPROG:Signal STOPPED wait(%d)
LIBUTIL
E16904
EXECPROG:Sig_Exit:errno=%d:stat=0x%X:sig=%d:
pid=%d,child=%d
LIBUTIL
E16905
EXECPROG:Unexpected
exit:errno=%d:stat_loc=0x%X:ret=%d:pid=%d,child=
%d
LIBUTIL
E16906
EXECPROG:Killed Child(%d):%s:
Maintenance and Troubleshooting Guide
March 2008
65
66
LIBUTIL
E16907
EXECPROG:errno=%d:stat_loc=0x%X:ret=%d:pid=
%d,child=%d
LIBUTIL
E16908
PID(%d)Relaying signal=%d to child_pid=%d
LIBUTIL
E16909
PID(%d)Ignoring signal=%d
LIBUTIL
E16910
PID(%d)Activating Default Signal Handler
LIBUTIL
E16911
PID(%d)Returning to exec_prog() Routine
LIBUTIL
E16912
PID(%d)Calling Primary Signal Handler
LIBUTIL
E17000
Error: system message '%s' not found
LIBUTIL
E17001
Error: unable to open account file '%s'
LIBUTIL
E17002
Error: unknown user '%s' specified.
LIBUTIL
E17003
Error: unknown group '%s' specified.
LIBUTIL
E17004
Error: chown ('%s', %d, %d) failed.
LIBUTIL
E17005
Error: malloc ('%s') failed.
LIBUTIL
E17100
getconfig: File '%s' is empty
LIBUTIL
E17101
getconfig: Couldn't open file '%s'
LIBSWIF
E18200
DISABLE INBOUND FAILED: (%d)%s
LIBSWIF
E18201
ENABLE INBOUND FAILED: (%d)%s, ns=%x,
rsb=%x, cause_IE=%x
LIBSWIF
E18202
PORTER%d: switch out of sync
LIBSWIF
E18203
Download of voice prompt file [%s] failed
LIBSWIF
E18204
CALL FAILED ON %d: %s
LIBSWIF
E18205
ORULE OVERRIDE DISABLE FAILED: %s
LIBSWIF
E18206
HANGUP FAILED FOR %d: %s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18207
HANGUP FAILED: EQUIP= %d
LIBSWIF
E18208
TRNSFR Transfer trunks not configured
LIBSWIF
E18209
TRNSFR No transfer trunks available
LIBSWIF
E18210
TRNSFR Transfer dial failed
LIBSWIF
E18211
TRNSFR Transfer Failed
LIBSWIF
E18212
TRNSFR Failed to put line on hold
Maintenance and Troubleshooting Guide
March 2008
LIBSWIF
E18213
RESPONSE FAILED: (%d)%s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18214
DOWNLOAD FAILED: file=%s, %s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18215
TRANSFER DIAL FAILED: (%d)%s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18216
TRANSFER CONFERENCE FAILED: (%d)%s,
ns=%x
LIBSWIF
E18217
Porter %d failed to busy-out line
LIBSWIF
E18218
Porter %d abandoned inbound call
LIBSWIF
E18219
DELIVER FAILED: (%d)%s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18220
POLL_MSG FAILED: (%d)%s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18221
OFFHOOK FAILED FOR %d: %s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18222
HOOKFLASH FAILED: (%d)%s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18223
STUTTERED DIALTONE TEST FAILED: (%d)%s,
ns=%x, rsb=%x, cause_IE=%x
LIBSWIF
E18224
DIAL FAILED: (%d)%s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18225
TRANSFER OFFHOOK FAILED: (%d)%s, ns=%x,
rsb=%x, cause_IE=%x
LIBSWIF
E18226
CAMPON FAILED equip_no=%d: %s, ns=%x,
rsb=%x, cause_IE=%x, status=%d
LIBSWIF
E18227
POLL_EVENT FAILED: (%d)%s, ns=%x, rsb=%x,
cause_IE=%x
LIBSWIF
E18228
TRNSFR Failed to find job specified holdmsg number
in voicemsg.cfg
LIBSWIF
E18400
swid_process_report: bad ns = 0x%04x
LIBSWIF
E18401
swid_process_report: bad 0x%x reply
LIBSWIF
E18402
swid_process_report: bad <port> in 0x%x reply
LIBSWIF
E18403
swid_process_report: 0x%x reply <control_port> out
of range.
Maintenance and Troubleshooting Guide
March 2008
67
68
LIBSWIF
E18404
swid_process_report: 0x69 reply on inactive virtual
port (0x%04x).
LIBSWIF
E18405
swid_process_report: 0x69 reply
<outgoing_port=0x%03x> out of range.
LIBSWIF
E18406
swid_report_72(reset): bad NSB.
LIBSWIF
E18407
swid_process_report: bad port = %d(0x%03x) in
0xDA reply
LIBSWIF
E18408
swid_process_report: Ignored 0x%x report on
port=%d(0x%03x),supcode=0x%04x
LIBSWIF
E18409
swid_process_report: unknown/unexpected change
LIBSWIF
E18410
(%d)/event %s(%d) on port (0x%03x).
LIBSWIF
E18411
swid_process_report: bad port %d(0x%03x) in 0xDB
reply
LIBSWIF
E18412
change=%x
LIBSWIF
E18413
swid_process_report: <port> (0x%03x) in 0xDD reply
not enabled for inbound
LIBSWIF
E18414
swid_process_report: 0x49 reply on inactive virtual
port (0x%04x).
LIBSWIF
E18415
swid_process_report: 0x49 reply
<outgoing_port=0x%03x> out of range.
LIBSWIF
E18416
swid_process_report: bad port = %d(0x%03x) in
0xEA reply
LIBSWIF
E19000
'%s' not in /etc/hosts!
LIBSWIF
E19001
swif: '%s' cannot create socket!
LIBSWIF
E19002
swif: cannot connect to ethernet switch port
'%s:%d',(%d)
LIBSWIF
E19003
swif: cannot set socket option SO_KEEPALIVE,
err(%d)
LIBSWIF
E19004
Failed to read packet header (%d,%d)
LIBSWIF
E19005
Failed to read packet body (%d,%d)
LIBSWIF
E19006
ethernet receive buffer too small
LIBSWIF
E19007
swif: listener cannot swic_init_client()
LIBSWIF
E19200
Unable to save switch log history
LIBSWIF
E19201
Log event from %s line %d is being throttled.
Maintenance and Troubleshooting Guide
March 2008
LIBSWIF
E19400
Unable to initialize switch channel, swif return=[%d]
LIBSWIF
E19401
Failed to reset switch channel
LIBSWIF
E19402
%s TONE DOWNLOAD FAILED, %s, ns=%x,
rsb=%x, cause_IE=%x
LIBSWIF
E19403
GREETING PROMPT DOWNLOAD FAILED, %s,
ns=%x, rsb=%x, cause_IE=%x
LIBSWIF
E19404
Failed to reset switch, swif return=[%d],ns=%x,
rsb=%x, cause_IE=%x
LIBSWIF
E19405
ZIP TONE FAILED, %s, ns=%x, rsb=%x,
cause_IE=%x, equip=%d
LIBSWIF
E19406
CONNECT RESPONSE: %s, ns=%x, rsb=%x,
cause_IE=%x, equip1:%d, equip2:%d
LIBSWIF
E19407
DISCONNECT RESPONSE: %s, ns=%x, rsb=%x,
cause_IE=%x, equip:%d,
LIBSWIF
E19408
Invalid prompt index:%d
LIBSWIF
E19600
unexpected EOF/incomplete comment
LIBSWIF
E19601
non-ASCII character.
LIBSWIF
E19602
Error reading exercise script '%%s':
LIBSWIF
E19603
line %%d:
LIBSWIF
E19604
event table full
LIBSWIF
E19605
not a SWIF function name
LIBSWIF
E19606
expecting a time value, digits only, enclosed in ()
LIBSWIF
E19607
expecting closing paren
LIBSWIF
E19608
expecting SWIF event name
LIBSWIF
E19609
too many exercise script errors -- aborting!
CALLSEL
E25000
Recall field name or value missing
CALLSEL
E25001
Recall field name not found
CALLSEL
E25002
Recall pattern error: %s
CALLSEL
E25003
%s - Failed to locate strategy files
CALLSEL
E25004
Unknown time zone designator %c
CALLSEL
E25005
No time zones selected
CALLSEL
E25007
Missing field name or value at recall entry %d
Maintenance and Troubleshooting Guide
March 2008
69
70
CALLSEL
E25008
Group may not begin with no selection
CALLSEL
E25009
Gap found between select fields within group
CALLSEL
E25010
Field name not found at recall entry %d
CALLSEL
E25011
Pattern error at recall entry %d: %s
CALLSEL
E25012
Sort direction is invalid
CALLSEL
E25013
Sort field name not found
CALLSEL
E25014
Unit work list Key field name missing
CALLSEL
E25015
Unit work list Key field name not found
CALLSEL
E25016
Strategy file name missing
CALLSEL
E25017
Strategy file name not found
CALLSEL
E25018
Unable to read strategy file
CALLSEL
E25019
%s - Unable to initialize strategy table
CALLSEL
E25020
%s - Time zoning of phone numbers not done on
calling list
CALLSEL
E25021
%s - Master calling list error
CALLSEL
E25022
%s - Unable to get callsel number
CALLSEL
E25023
%s - List selection aborted
CALLSEL
E25024
%s - Calling List %s is not Time Zoned
CALLSEL
E25025
%s - %s field not defined or incorrect length
CALLSEL
E25026
Callsel verification failed. Please use change option
CALLSEL
E25027
Improper Usage
CALLSEL
E25028
Special time zone + is not available
CALLSEL
E25029
Report field name not found
CALLSEL
E25030
You must specify at least one field
CALLSEL
E25031
Timeout: failed to identify status of the Index
Processing within %d seconds
CALLSEL
E25032
Failed to start asynchronous Index Processing
sub-process
CALLSEL
E25501
Callsel terminated by signal = %d
CALLSEL
E25502
Callsel exited with status of %o (octal)
Maintenance and Troubleshooting Guide
March 2008
CALLSEL
E25503
Couldn't open file %s
CALLSEL
E25504
Failed to read file %s
CALLSEL
E25505
callconn:fail to send zALTQUE msg
SEVMONT
E27000
Invalid input parameter(s)
SEVMONT
E27100
Failed to process the method
SEVMONT
E27200
Failed to open the file
SEVMONT
E27300
Failed to activate the service
CORE
E28000
Failed to initialize switcher
CORE
E28100
Unable to attach to data segment
CORE
E28101
invalid channel number %s
CORE
E28102
couldn't open switch channel
CORE
E28103
*** no active channel !!
CORE
E28104
'memory' is not implemented
CORE
E28105
cannot attach to ipc queue, retval=%d, errno=%d
CORE
E28106
equipment number type not found
CORE
E28107
no seize on ISDN ports
CORE
E28108
no drop on ISDN ports
CORE
E28109
UNRECOGNIZED COMMAND! %s
CORE
E28200
%s - Job %s %s already exists
CORE
E28201
%s - Job %s %s does not exist
CORE
E28202
%s - Exceeded shared segment limit
CORE
E28203
%s - No phone calls in wait but wait count disagrees
CORE
E28204
%s (test_inbound_service) - Conn_op_line failed
CORE
E28205
%s - Invalid slot number(%d) passed
CORE
E28206
%s - Invalid agent number %d
CORE
E28207
%s - Invalid call trans type %c
CORE
E28208
No oper_name ('%s') or oper_jobnum (%d), cannot
archive
CORE
E28209
No oper_name ('%s') or oper_jobnum (%d), cannot
restore
Maintenance and Troubleshooting Guide
March 2008
71
72
CORE
E28210
No oper_name ('%s'), cannot restore
CORE
E28211
No jobname ('%s') or jobnum (%d), cannot archive
CORE
E28300
Unable to create a list of extensions
CORE
E28301
add_agent: Unable to insert agent
CORE
E28302
add_agent: entered a duplicate value
CORE
E28303
add_agent: Error getting current pointer
CORE
E28304
agent_recall: Unable to insert recall
CORE
E28305
recall_rmp - Exit since AGENTOWNRECALL is off
CORE
E28306
recall_rmp - Unable to create a list of agent
CORE
E28307
recall_rmp - Unable to create a list of recall
CORE
E28308
recall_rmp - unknown message received '%s'
CORE
E28309
Failed to setup ipc for agent %s
CORE
E28310
recall_rmp - agent %s not available
CORE
E28400
Sales verification or managed dialing must have
agents
CORE
E28401
Managed dialing is not permitted with sales
verification or inbound
CORE
E28402
Virtual agents cannot select a specific unit to log in to
CORE
E28404
Sales verification is not permitted with unit work lists
CORE
E28405
Sales verification is not permitted with inbound
CORE
E28406
Inbound with unshared account ownership is not
permitted
CORE
E28407
Alternate selection %s is not permitted with unit work
lists
CORE
E28408
%s - Failed to get job number
CORE
E28409
Job startup failed in job configuration
CORE
E28410
Job setup incomplete, Aborting %s
CORE
E28411
%s - Unknown message: %s, %s, %s
CORE
E28412
%s - Not an inbound capable system
CORE
E28413
%s - Failed to setup hunt group
CORE
E28414
%s - Invalid hunt group
Maintenance and Troubleshooting Guide
March 2008
CORE
E28415
%s - Failed to receive a job info position
CORE
E28416
%s - FATAL_ERROR: %s
CORE
E28417
%s - Record length greater than %d
CORE
E28418
%s - Failed on verifying assoc. list
CORE
E28419
%s - Failed on reading assoc. list
CORE
E28420
%s - Master calling list error
CORE
E28421
%s - Invalid strategy: %s
CORE
E28422
%s - Failed to table strategy file: %s
CORE
E28423
%s - Index file not created with calling list %s
CORE
E28424
%s - Exceeded record slots available,PORTCOEF
may be low
CORE
E28425
%s(%s) - Record number returned invalid %d
CORE
E28426
%s(%s) - Record number returned wrong %d, job
number %d
CORE
E28427
Failed to attach to semaphore
CORE
E28428
Failed to read selection criteria file:%s
CORE
E28429
%s - Call cancel is not permitted
CORE
E28430
Job linking is not permitted
CORE
E28431
ERROR: EDTFILE not specified in job file %s
CORE
E28432
ERROR: Failed to fork job %s (error=%d)
CORE
E28433
ERROR: Failed to exec job %s
CORE
E28434
ERROR: Failed to invoke wait for job %s (error=%d)
CORE
E28435
Next job %s started
CORE
E28436
Next job %s error: %s
CORE
E28437
Next job %s terminated by signal %d
CORE
E28438
Next job %s stopped by signal %d
CORE
E28439
ERROR: Next job %s already starting up.
CORE
E28440
Caller(launch_posttrans) - Failed to invoke function
fork, err=%d
CORE
E28441
Caller(launch_posttrans) - Failed to invoke function
rtprio, err=%d
Maintenance and Troubleshooting Guide
March 2008
73
74
CORE
E28442
Caller(launch_posttrans) - Failed to invoke function
pipe, err=%d
CORE
E28443
%s - Failed to create calling script %s
CORE
E28444
Caller - Failed to get port matching label %s N%s
CORE
E28445
%s - Failed to terminate proc %d for Agent %s
CORE
E28446
caller:fail to send %s to %s
CORE
E28447
caller:fail to get shadowjobname
CORE
E28448
Job(%s) '%s' sent to a non shadow job
CORE
E28449
Caller - PostTrans:Failed to exec prog '%s'
CORE
E28450
Caller - %s (R%d) (N%s)
CORE
E28451
Job(%s):%s: no available line
CORE
E28452
Job(%s):%s: no available record slot
CORE
E28453
Job(%s):%s:No recall found in queue
CORE
E28454
Job(%s):%s:Invalid phone for this recall, rec_slot=%d
CORE
E28455
Job(%s):%s:Same record (%d)is opened
CORE
E28456
Job(%s):%s:Record %d is locked
CORE
E28457
Job(%s):%s:Failed to read record %d
CORE
E28458
Job(%s)::Failed to get phone number:%s
CORE
E28459
Job(%s)!get_ft_sort_key!clread error rec_num=%d
CORE
E28460
Job(%s):PostTrans:Failed to write pipe, recnum =
%d, errno = %d
CORE
E28461
Listops(pvrs_record_load) - Record number
transferred is bad (%d)
CORE
E28462
Preview Empty Record with Multi Units is not
allowed.
CORE
E28463
Caller - RTSTATS is YES but failed to get
operstats_base and/or job_stats_base
CORE
E28464
Invalid name (%s) for IVR pool job
CORE
E28465
Data process label '%s' for job '%s' missing/invalid
CORE
E28600
%s - Invalid port number assigned
CORE
E28601
Porter %d - Line inoperable
Maintenance and Troubleshooting Guide
March 2008
CORE
E28602
%s - Failed to setup input IPC.
CORE
E28603
%s - Failed to setup conn_mgr IPC.
CORE
E28604
Failed on inbound list def. %s
CORE
E28605
Failed on outbound list def. %s
CORE
E28606
No extension number for the IVR to dial
CORE
E28607
No ring command for IVR to run an application
CORE
E28608
HOOKIVR: No dial tone from PBX
CORE
E28609
%s - Preview failed to find agent %s
CORE
E28610
%s - Mdial failed to find agent %s
CORE
E28611
Not allowed in wait
CORE
E28612
Request out of sequence
CORE
E28613
Missing preview
CORE
E28614
Second transaction
CORE
E28615
No text in script
LIBDSI
E28616
Script missing label %s
CORE
E28617
Op keys missing label %s
CORE
E28618
Job - Data script %s label missing
CORE
E28619
Job - Inbound script label %s missing/invalid
GLOB
E28620
Job - Outbound script label for call %s missing/invalid
CORE
E28621
Failed to set DAA type:
CORE
E28622
Failed to set country code:
CORE
E28623
Porter %d failed to busy-out line
CORE
E28624
Porter %d abandoned inbound call
CORE
E28625
Failed to set DAA type: %d, Porter%d, %d
CORE
E28626
Porter %d: Line Fail:
CORE
E28627
%s - Invalid line class %c
CORE
E28628
Transfer failed, try again later
CORE
E28629
No agent available, try again later
CORE
E28630
NO DIAL TONE
Maintenance and Troubleshooting Guide
March 2008
75
76
CORE
E28631
M %d > MAX
CORE
E28632
M %d < MIN
CORE
E28633
Porter - bld_dspmesg:message too long for internal
buffer
GLOB
E28634
Job - Transfer Wait Queue script label %s missing/
invalid
CORE
E28800
Recall can't be less than %d minutes
CORE
E28801
Record is busy
CORE
E28802
Recall not allowed for inbound call
CORE
E28803
Transfer setup failed
CORE
E28804
Job %s not running
CORE
E28805
Job %s not ready - Log on later
CORE
E28806
%s - Failed to find job name %s in data seg
CORE
E28807
Agent number (%d) invalid
CORE
E28808
Headset (%s) not specified in %s file
CORE
E28809
%s not specified in switch.cfg file
CORE
E28810
Duplicate headset ID (%d) already in use by agent
%s
CORE
E28811
Duplicate headset ID (%d) already in use
CORE
E28812
Agent %s logged in Already - Access Denied
CORE
E28813
Maximum %s agent limit reached
CORE
E28814
Managed agents are not permitted on this job
CORE
E28815
Sales verification with unit work lists is not permitted
CORE
E28816
Inbound agents only permitted
CORE
E28817
Outbound agents only permitted
CORE
E28818
Outbound or Managed agents only permitted
CORE
E28819
Only outbound agents permitted by sales verification
CORE
E28820
Unit value not found, or unavailable
CORE
E28821
Cannot be DONE from alternate screen
CORE
E28822
Line not released
Maintenance and Troubleshooting Guide
March 2008
CORE
E28823
Failed to save record
CORE
E28824
Changes to record not saved
CORE
E28825
Record not found
CORE
E28826
Record is no longer available
CORE
E28827
Failed to unlock record
CORE
E28828
Unknown screen type
CORE
E28829
Field entry is required
CORE
E28830
Field value not in acceptable list
CORE
E28831
Field has non-numeric value
CORE
E28832
%s doesn't match %s format
CORE
E28833
Invalid month in date
CORE
E28834
Invalid year in date
CORE
E28835
Invalid day in date
CORE
E28836
Invalid format character found
CORE
E28837
Invalid hour in time
CORE
E28838
Invalid minute in time
CORE
E28839
Invalid second in time
CORE
E28840
Time is not in correct format
CORE
E28841
Invalid phone
CORE
E28842
Invalid phonestat - %c
CORE
E28843
Invalid phone number - %s
CORE
E28844
No REL_DIST setting
CORE
E28845
No REL_TME setting
CORE
E28846
No DONE_TME setting
CORE
E28847
Date is before the current date
CORE
E28848
Recall time and date outside timezone
CORE
E28849
%s - Record's timezone is unknown
CORE
E28850
ERROR: Cannot open channel to operator monitor
process
Maintenance and Troubleshooting Guide
March 2008
77
78
CORE
E28851
ERROR: Operator monitor process does not respond
CORE
E28852
ERROR: HEADSET IS NOT ACTIVE
CORE
E28853
Error sending digits to switch
CORE
E28854
DIALDIGIT Customer Hangup(%d)
CORE
E28855
DIALDIGIT Dial Error=%d
CORE
E28856
ERROR: Invalid response from operator monitor
process
CORE
E28857
Feature only available for DIGITAL switch
CORE
E28858
%s - Exceeded operator slots available,MAXOPS is
low
CORE
E28859
%s(%s) - Operator number returned invalid %d
CORE
E28860
%s(%s) - Operator number returned wrong %d, job
number %d
CORE
E28861
Operator slot semaphore not available
CORE
E28862
FATAL ERROR ON SELECT - %d
CORE
E28863
ERROR - Unknown file descriptor
CORE
E28864
Unknown IPC message - %s
CORE
E28865
Unknown Command message - %s
CORE
E28866
Telephone line not available
CORE
E28867
Telephone line not offhook
CORE
E28868
Callbacks are not permitted on inbound calls
CORE
E28869
Headset volume must be in the range of 1 to 8
CORE
E28870
Reserve headset id request pending
CORE
E28871
Invalid headset id - %s, %s
CORE
E28872
Headset already connected
CORE
E28873
Headset ID not reserved nor validated
CORE
E28874
Connect headset request pending
CORE
E28875
No headset connect request pending
CORE
E28876
Headset not connected
CORE
E28877
Disconnect headset request pending
Maintenance and Troubleshooting Guide
March 2008
CORE
E28878
No headset disconnect request pending
CORE
E28879
Headset not disconnected
CORE
E28880
Headset connection broken
CORE
E28881
Headset connection re-connected
CORE
E28882
Already available for work - Cannot change class
CORE
E28883
Invalid work class
CORE
E28884
Not attached to data shared memory
CORE
E28885
Not attached to a job
CORE
E28886
Unit work lists are not permitted on this job
CORE
E28887
Already available for work - Cannot change unit id
CORE
E28888
Unit id not found
CORE
E28889
Attached to a job already - Must detach first
CORE
E28890
Failure to open job %s resource file
CORE
E28891
Must specify INBOUND or OUTBOUND operation
CORE
E28892
No inbound calling list fields available
CORE
E28893
No outbound calling list fields available
CORE
E28894
Field name not found
CORE
E28895
Already available for work
CORE
E28896
Headset must be active
CORE
E28897
Available for work request pending
CORE
E28898
Job not available
CORE
E28899
No available for work request pending
CORE
E28900
Wrong message id received - %s
CORE
E28901
Not available for work
CORE
E28902
Already on work item
CORE
E28903
Already set ready for next work item
CORE
E28904
Request for no further work pending
CORE
E28905
Request to transfer to another job is active
CORE
E28906
Not ready for next work item
Maintenance and Troubleshooting Guide
March 2008
79
80
CORE
E28907
Not a managed dialing job
CORE
E28908
Not on work item
CORE
E28909
Managed call already complete
CORE
E28910
Managed call cancelled or complete
CORE
E28911
Managed call cancelled
CORE
E28912
Data record not available for update
CORE
E28913
No job attached
CORE
E28914
Still available for work on the job
CORE
E28915
Not logged off job yet
CORE
E28916
Job attached - Must detach first
CORE
E28917
No job attached
CORE
E28918
Not avail for work on the job
CORE
E28919
Not currently assigned to a work item
CORE
E28920
Headset ID not found in reserved list - %s
CORE
E28921
FATAL ERROR ABORTING
CORE
E28922
No reserve headset id request pending
CORE
E28923
Headset ID - %s already reserved
CORE
E28924
Must sign on system first
CORE
E28925
Already signed on the system
CORE
E28926
Invalid sign on
CORE
E28927
Agent - Unable to open command input socket errno:%d
CORE
E28928
Agent - Unable to find agent service entry in /etc/
services
CORE
E28929
Agent - Unable to bind to local address - errno:%d
CORE
E28930
Agent - Unable to setup listen on socket - errno:%d
CORE
E28931
Agent - Fork of process failed - errno:%d
CORE
E28932
Agent - Accept socket connection call failed errno:%d
CORE
E28933
Agent - Read error on client command socket count:%d, errno:%d
Maintenance and Troubleshooting Guide
March 2008
CORE
E28934
Agent - Send error on client command socket errno:%d
CORE
E28935
Agent - Parent process exiting
CORE
E28936
Agent - Setting of linger failed - errno:%d
CORE
E28937
%s agent is not allowed
CORE
E28938
Invalid phone type
CORE
E28940
Operator - data_synced timeout, data may not be
updated
CORE
E28942
Job %s is not available
CORE
E28943
Invalid key
CORE
E28944
COLONS(:) NOT ALLOWED IN PHONE FIELD
CORE
E28945
Managed agents only permitted
CORE
E28946
Agent not acquired yet
CORE
E28947
Invalid call completion code %s
CORE
E28948
Jobmon found incorrect PID %d when releasing
opslot %d
CORE
E28949
Unable to mark as DO NOT CALL
CORE
E28950
Extension not in database
CORE
E28951
Extension in use
CORE
E28952
Cannot add agent
CORE
E28953
Acd_ext file read failed
CORE
E28954
Duplicate login - please try again
CORE
E28955
DNC cannot find key field %s
CORE
E28956
ACD Login Error
CORE
E28957
Unable to mark other calling lists
CORE
E28958
Do Not Call group '%s' not defined
CORE
E28959
Invalid Agent Type
CORE
E28960
HASH key %s not defined in calling list %s
CORE
E28961
Invalid Jobname
CORE
E28962
ERROR - Unknown file descriptor
Maintenance and Troubleshooting Guide
March 2008
81
82
CORE
E28963
ZONEPHONE%d field not set
CORE
E28964
Agent phone is busy. Release phone line before
proceeding.
CORE
E28965
Softdialer link is down. Please wait until the link is up.
CORE
E28966
Invalid headset ID
CORE
E28967
Agent is not allowed to logoff
CORE
E28968
Failed to register with dispatcher
CORE
E28969
Operator - init_op_cntrl() invoked with NULL
curr_op_ptr
CORE
E28970
Error queuing jobname data in list_running_jobs
CORE
E28971
Operator - cannot access job resource file
CORE
E28972
Operator - Timed out while waiting for job resouce file
CORE
E28973
Operator - Cannot setup screen '%s'.
CORE
E28974
Operator - cannot read screen map - %s:%s
CORE
E28975
Cannot search when previewing a recall
CORE
E28976
Cannot dial from deleted record
CORE
E28977
Operator - Failed to initialize signal %s(%d)
CORE
E28978
Operator - Failed to ignore signal %s(%d)
CORE
E28979
Operator - Failed to enable auto release SIGUSR1
handler
CORE
E28980
Operator - Failed to disable auto release SIGUSR1
handler
CORE
E28981
Invalid format for %s for job %s
CORE
E28982
Managed call cannot be cancelled
CORE
E28983
AGTNoFurtherWork is already in progress
CORE
E28984
Agent is being released to ACD inbound
CORE
E29000
Managed dialing capable jobs only
CORE
E29001
Jobmon - Failed on startup
CORE
E29002
Jobmon - Failed to Setup Windows
CORE
E29006
Job '%s' not running
CORE
E29007
Job not ready, waiting %d seconds...
Maintenance and Troubleshooting Guide
March 2008
CORE
E29008
Job not Ready - Logon later
CORE
E29009
Outbound capable jobs only
CORE
E29010
Inbound capable jobs only
CORE
E29011
Not a multi-unit job
CORE
E29012
May only monitor Inbound
CORE
E29013
Invalid number entered
CORE
E29014
Monitoring of phone line disabled
CORE
E29015
Monitoring of agent disabled
CORE
E29016
Invalid port for monitoring agents
CORE
E29017
Agent being monitored
CORE
E29018
No jobs currently running.
CORE
E29019
Error multiple job entrys in SHM
CORE
E29020
No agents having a record available
CORE
E29021
Record no longer available
CORE
E29022
No units currently available
CORE
E29023
No agents available to be killed
CORE
E29024
Invalid entry, no changes saved.
CORE
E29025
No other jobs currently running.
CORE
E29026
No agents currently available.
CORE
E29027
Agent transfer currently being processed.
CORE
E29028
Phone line allocation currently being processed.
CORE
E29029
No jobs currently linked.
CORE
E29030
No jobs available for selection.
CORE
E29031
Link Job '%s' already starting up.
CORE
E29032
No phone lines currently acquired
CORE
E29033
No request of phone lines currently pending
CORE
E29034
No phone lines of type %s acquired
CORE
E29035
Job linking capable jobs only
CORE
E29036
Invalid system terminal.
Maintenance and Troubleshooting Guide
March 2008
83
84
CORE
E29037
WARNING!!!
CORE
E29038
May not monitor op/lines
CORE
E29039
Duplicate HEADSET value.
CORE
E29040
Illegal W, Q or U rate setting
CORE
E29041
Illegal Hit Rate setting
CORE
E29042
Allow sending 75 characters
CORE
E29043
jobmon: failed to send %s to %s
CORE
E29044
Wrong type %s of message for job_strter
CORE
E29045
Invalid data from system for get_iicb_status
CORE
E29046
Invalid response for list_domain
CORE
E29047
Invalid control method
CORE
E29048
Invalid response for list_group
CORE
E29049
Invalid response for get_group_stats
CORE
E29050
Resynch agents is not allowed in the current state
CORE
E29051
Unable to create a list of extensions
CORE
E29052
Unable to add extension to list!
CORE
E29053
Unable to insert extension
CORE
E29054
Entered a duplicate value
CORE
E29055
Error getting current pointer
CORE
E29056
No operator to monitor
CORE
E29057
Jobmon: Release code %d has count of %d
CORE
E29150
%s:failed to %s
CORE
E29151
Failed to initialize signals
CORE
E29152
Failed to set SIGALRM handler
CORE
E29153
BEEPER:unknown message %s
CORE
E29154
Beeper - INTERVAL_ZIPTONE is not set in
master.cfg
CORE
E29200
%s - Failed to send msg[%s] on channel %d
CORE
E29201
%s - Failed to %s data segment
Maintenance and Troubleshooting Guide
March 2008
CORE
E29202
%s - Failed to %s unit segment
CORE
E29203
%s - Failed to attach data segment
CORE
E29204
%s - Failed to create data segment
CORE
E29205
%s - Failed to create unit segment
CORE
E29206
%s - Failed to attach unit segment
CORE
E29207
Invalid number entered
CORE
E29208
%s - Failed to open channel %d
CORE
E29210
%s - Failed to erase voice message %s
CORE
E29212
%s - Failed to erase all messages
CORE
E29213
%s - MSGNO parameter too big
CORE
E29214
%s - Too many messages to load
CORE
E29400
Unable to find base file for %s
CORE
E29500
ao_recall: failed to send %s
CORE
E29501
ao_recall: callsel for %s failed
CORE
E29502
ao_recall - cannot retrieve selection file from '%s'
CORE
E29503
ao_recall - no strategy file in selection file '%s'
CORE
E29505
Error queuing timeout data in add_timeout
CORE
E29600
Unable to attach to data segment
CORE
E29601
HUNTGRP set incorrectly
CORE
E29602
Login code not defined for line %s
CORE
E29603
Could not open channel #%d
CORE
E29604
No login dial tone on line #%d
CORE
E29605
No dial tone on line #%d
CORE
E29606
Unable to dial %s
CORE
E29607
Error with line %d
CORE
E29608
ACD_login : Signal Abort:%s(%d)
CORE
E29700
Invalid Selection Number
CORE
E29701
Unable to open %s for reading
CORE
E29702
Unable to open %s for writing
Maintenance and Troubleshooting Guide
March 2008
85
86
CORE
E29703
Unable to load job file for agent %s
CORE
E29704
Unable to read header in job file for agent %s
CORE
E29705
Unable to read job list in job file for agent %s
CORE
E29706
Unable to write header in job file for agent %s
CORE
E29707
Unable to write job list in job file for agent %s
CORE
E29708
Job not valid for agent
CORE
E29709
Agent job list feature not activated
CORE
E29710
Invalid line (%s) in agentjobs.raw; skipping
CORE
E29711
Invalid header in job file for agent %s; will recreate
CORE
E29712
Job name for agent %s too long; will truncate to %d
characters
CORE
E29714
Unable to load job file for job chain %s
CORE
E29715
Unable to write header in job file for job chain %s
CORE
E29716
Unable to write job list in job file for job chain %s
CORE
E29717
Unable to read header in job file for job chain %s
CORE
E29718
Invalid header in job file for job chain %s; will recreate
CORE
E29719
Unable to read job list in job file for job chain %s
CORE
E29800
Job Chain %s does not exist
CORE
E29900
Unable to start next job %s
CORE
E29901
%s - Chain %s already started.
CORE
E29902
%s - Max number of chains already started.
CORE
E29903
Unable to start job %s
CORE
E29904
Unable to stop job %s
CORE
E29950
Feature not available in Softdialer Mode
CORE
E29951
Specified more than %d line groups for use on job
CIVR
E30000
IVR: -- The IVR_REC_LEN is not defined
CIVR
E30001
IVR: -- The IVR_HEADER is not defined
CIVR
E30002
IVR: -- The signal call failed - SIGUSR1
CIVR
E30003
IVR: -- Cannot open the IVR read port
Maintenance and Troubleshooting Guide
March 2008
CIVR
E30004
IVR: -- Cannot open the output file 1.
CIVR
E30005
IVR: -- Problem with read from tty port
CIVR
E30006
IVR: -- Received 15 bad IVR records1
CIVR
E30007
IVR: -- Problem writing to output file
CIVR
E30008
IVR: -- The signal call failed.
CIVR
E30009
IVR: -- SIGUSR Cannot open output file 2.
CIVR
E30010
IVR: -- SIGUSR Cannot open output file 1.
CIVR
E30011
IVR: -- The IVR_TIME_INTVAL is not defined
CIVR
E30012
IVR: -- The IVR_NUM_PORTS is not defined
CIVR
E30013
IVR: -- Could not exec the process for child
CIVR
E30014
IVR: -- Could not fork the child
CIVR
E30015
IVR: SYSTEM call for ivr_mk_clist did not return 0
CIVR
E30016
IVR: Could not re-exec the process for child
CIVR
E30017
IVR: Tried to restart the child 15 times unsuccessfully
CIVR
E30018
IVR -- SEVERE ERROR, IVR_DAEMON HAS DIED.
CIVR
E30019
IVR: -- System call did not return 0
RECORDX
E31200
Null character specified as fill not allowed
RECORDX
E31400
Not a valid hexadecimal
DBCONST
E32000
%s - No backup list file given
DBCONST
E32001
%s - File dictionary name missing
DBCONST
E32002
%s - Calling list or file dictionary name missing
DBCONST
E32003
%s - One or both merge file names missing
DBCONST
E32004
%s - Warning: Reached record limit, additional data
not converted
DBCONST
E32005
%s - Invalid calling list name
DBCONST
E32006
%s - Mismatch in calling lists
DBCONST
E32007
%s - Invalid tape record size
DBCONST
E32008
%s - Invalid switch year parameter (%d), using
default of 70
DBCONST
E32400
%s - Rewind failed
Maintenance and Troubleshooting Guide
March 2008
87
88
DBCONST
E32401
%s - System OS ID error
DBCONST
E32402
%s - Backup device name(s) missing
DBCONST
E32403
%s - Calling list name missing
DBCONST
E32404
%s - Dictionary or configuration file missing
DBCONST
E32405
%s - Bad tape device name: %s
DBCONST
E32600
%s - Failed to execute program '%s' successfully.
DBCONST
E32601
Wrong hexadecimal value specified with -a option
DBCONST
E32602
CHARSET parameter in .conf file must be set to
'ASCII', with moj_conv program.
DBCONST
E32603
CHARCASE parameter in .conf file must be set to
'UPLOW', with moj_conv program.
DBCONST
E32604
TAPEDEV parameter in .conf file must not be the
device in /dev directory.
DBCONST
E32605
BLKSIZE parameter and RESIZE parameter are
inconsistent.
DBCONST
E32606
Cannot read Japanese code control file %s
DBCONST
E32607
No DBCS conversion table name in the code control
file.
LETTRGN
E34000
formlet - Error reading record: %s
LETTRGN
E34001
Criteria error: %s
LSTEXTR
E35000
ext_data - Failed to insert new Calling List header
info %s
LSTEXTR
E35001
ext_data - Invalid new calling list name
LSTEXTR
E35002
ext_data - Unable to append - calling list fdicts differ
LSTEXTR
E35200
ext_list - Invalid new calling list name
LSTEXTR
E35201
ext_list - Failed to read file dictionary %s
DBMAINT
E36000
Record_ed: Mark field '%s' not defined for list '%s'
DBMAINT
E36001
Invalid record number %s
DBMAINT
E36002
Failed to find record number %d
DBMAINT
E36003
Failed to determine HASH field %s
DBMAINT
E36004
Failed to find select field %s
DBMAINT
E36005
Failed to find record number %d
Maintenance and Troubleshooting Guide
March 2008
DBMAINT
E36006
Record_ed - Could not save Record %d, Value=%s in
List %s
DBMAINT
E36101
Rec_update - Child process %s terminated
DBMAINT
E36200
Pattern error in field %d
DBMAINT
E36201
Hash file '%s' (%s) is older than calling list '%s' (%s),
please run clhash again.
DBMAINT
E36202
Hash key field length %d does not match calling list
field length %d
DBMAINT
E36203
Source calling list of hash file %s does not match
current calling list %s
TOOLS
E37000
Error - Failed to load security files
TOOLS
E37001
Invalid Name
TOOLS
E37002
Name already exists or invalid name
TOOLS
E37003
Invalid character in Name
TOOLS
E37004
A password must be entered:ERROR
TOOLS
E37005
Login Group is Not Valid
TOOLS
E37006
ERROR: exceeded valid number of user
entries[%d].:Invalid,%s:%s:%s:%s
TOOLS
E37007
Createop:%s:Discard:%s:
TOOLS
E37008
Invalid Name:Duplicate account
TOOLS
E37009
Name already exists:Failed to add account
TOOLS
E37010
File is locked by another supervisor, try later!
TOOLS
E37011
Unknown error, try later!
TOOLS
E37012
No group information is loaded--%s
TOOLS
E37013
Fail to read createop.cfg file
TOOLS
E37014
Current user is not authorized
TOOLS
E37015
Validate group information failed
TOOLS
E37016
Invalid old password, Cannot add %s
TOOLS
E37017
Error, cannot add %s
TOOLS
E37018
Invalid or duplicate user %s
TOOLS
E37019
Fail to add to ftpusers-> %s
Maintenance and Troubleshooting Guide
March 2008
89
90
TOOLS
E37020
Invalid user name length: %s
TOOLS
E37021
Cannot change owner of %s to admin
TOOLS
E37022
Invalid sub-group found in sub-group string %s of
group.pds file
TOOLS
E37023
Could not setuid(), error = %d
TOOLS
E37024
Could not setgid(), error = %d
TOOLS
E37025
Have to supply both password file and vllogin or
group file
TOOLS
E37026
Fail to getpwnam(%s)
TOOLS
E37027
alter_entry: Fail to do lckpwdf()
TOOLS
E37028
%s not found in vllogin
TOOLS
E37029
Fail to enforce new password for %s
TOOLS
E37030
DEL_REC: Fail to delete %s
TOOLS
E37031
EDIT_REC: Fail to modify account %s
TOOLS
E37032
Account not found: %s
TOOLS
E37033
Fail to link correct profile for %s
TOOLS
E37034
Fail to add user %s
TOOLS
E37035
Missing Password or Menu fields: %s:%s:%s:%s
TOOLS
E37036
%s not found in group file
TOOLS
E37037
WARNING: Reached limit of MAX_USERS (%d) as
set in createop.cfg file
TOOLS
E37038
ERROR: Reached limit of MAX_USERS (%d) as set
in createop.cfg file
TOOLS
E37039
Error - Failed to load existing user IDs
EDITOR
E37200
Invalid Expert Calling Ratio
EDITOR
E37201
Field '%s' not filled in
EDITOR
E37202
No Inbound jobs allowed on this system.
EDITOR
E37203
Number of reserved inbound lines must be from 1 to
%s
EDITOR
E37204
Invalid call completion code specified
EDITOR
E37205
Invalid start or stop time format
Maintenance and Troubleshooting Guide
March 2008
EDITOR
E37206
Invalid Hit Rate
EDITOR
E37207
Invalid paired phone count/type
EDITOR
E37208
Invalid line type specified
EDITOR
E37209
HUNTGRP: format error
EDITOR
E37210
No HUNTGRP setting.
EDITOR
E37211
Selection list not available for use
EDITOR
E37212
Selection list for job not found
EDITOR
E37213
No Verification Selection List Ready for Job
EDITOR
E37214
Selection list not created with this Calling List
EDITOR
E37215
Number of telephone lines must be from 1 to 96
EDITOR
E37216
An odd number of telephone lines is not allowed
EDITOR
E37217
Quota Value less than one
EDITOR
E37218
There must be a script label for answer specified
EDITOR
E37219
Invalid call completion code for Quota Value %d
EDITOR
E37220
Quota %d is not OP completion code
EDITOR
E37221
%s field missing from %s
EDITOR
E37222
Creation date/time error: %s
EDITOR
E37223
Data Transfer file %s.axfr: %s not in %s
EDITOR
E37224
Wrong job for verification editor
EDITOR
E37225
No editable line found in file: %s
EDITOR
E37226
Failed to create link list header
EDITOR
E37227
ERROR: Job %s is already running
EDITOR
E37228
ERROR: Job file %s already in use
EDITOR
E37229
Failed to find linked job file: %s
EDITOR
E37230
Managed dialing job linking is not permitted
EDITOR
E37231
Sales verification job linking is not permitted
EDITOR
E37232
Job linking is not permitted
EDITOR
E37233
%s - Unable to start job %s
EDITOR
E37234
Failed to find Inbound Job Screen: %s
Maintenance and Troubleshooting Guide
March 2008
91
92
EDITOR
E37235
Failed to find Inbound Job Map: %s
EDITOR
E37236
Failed to read Inbound List: %s
EDITOR
E37237
Failed to find MSCRN - Job screen: %s
EDITOR
E37238
Failed to find MSCRN - Job map: %s
EDITOR
E37239
Number of multi screens does not match number of
multi lists
EDITOR
E37240
Failed to find ASCRN - Job screen: %s
EDITOR
E37241
Failed to find MSCRN - Job map: %s
EDITOR
E37242
Failed to read Assoc List: %s
EDITOR
E37243
Number of associate screens does not match number
of associate lists
EDITOR
E37244
Number of edit fields does not match number of
associate lists
EDITOR
E37245
%s - %s(err_code=%d)
EDITOR
E37246
%s(err_code=%d)
EDITOR
E37247
Unable to clear %s
EDITOR
E37248
Line type specified already in use
EDITOR
E37249
Improper usage
EDITOR
E37250
There must be a script label for call specified
EDITOR
E37251
Initial Hit Rate out of range (1-100)
EDITOR
E37252
Failed to open script file for IVR ID %s
EDITOR
E37253
IVR script name not specified; required if IVR ID
specified
EDITOR
E37254
Unable to find %s in script file for IVR ID %s
EDITOR
E37255
Calling list %s is not on local dialer.
EDITOR
E37256
Selecting unit to log in to is not permitted with
inbound-only job
TOOLS
E37300
%s: Invalid process ID %d
TOOLS
E37301
termprocess:fail to send signal message %s
EDITOR
E37400
Failed to find %s: %s
EDITOR
E37401
Failed to save %s file: %s
Maintenance and Troubleshooting Guide
March 2008
EDITOR
E37402
Failed to allocate %s
EDITOR
E37403
Failed to read %s: %s
EDITOR
E37404
Number of %s do not match number of %s
EDITOR
E37405
%s field missing or incorrect length
TOOLS
E37500
Fail to terminate process %d, errno %d
TOOLS
E37501
Fail to kill process %d, errno %d
TOOLS
E37502
Fail to send SIGUSR1 process %d, errno %d
TOOLS
E37503
Fail to setreuid to (-1, 0)
EDITOR
E37600
Field #%d not filled in
EDITOR
E37601
No editable line found in file: %s
EDITOR
E37602
Failed to create link list header
EDITOR
E37603
ERROR: %s already in use
EDITOR
E37604
Unable to clear %s
TOOLS
E37800
Groupname %s has invalid length
TOOLS
E37801
Skeleton path %s for group %s does not exist
TOOLS
E37802
Could not add group %s
MARKREC
E38000
Chkentdt - Failed to create old database index
MARKREC
E38001
Chkentdt - Failed to create new database index
MARKREC
E38002
Chkentdt WARNING - cannot open old database %s.
Assuming none exists
MARKREC
E38003
Chkentdt ERROR:-S option must be used with -i
option
MARKREC
E38004
Chkentdt - Unable to malloc hash_table
MARKREC
E38400
Latemrk - Failed to create calling list index
MARKREC
E38401
Latemrk - Failed to create late list index
MARKREC
E38402
Latemrk - file error building late list
MARKREC
E38403
Latemrk - field_list - key fields not the same length
MARKREC
E38404
Latemrk - %s recno %d locked; skipping;
MARKREC
E38405
Latemrk - %s '%s' not found in %s, skipping;
MARKREC
E38406
Latemrk - Field '%s' not found in %s
Maintenance and Troubleshooting Guide
March 2008
93
94
MARKREC
E38600
%s - Failed to read record: %s
MARKREC
E38601
%s - Failed to update record: %s
MARKREC
E38602
%s - Failed to create calling list search index
MARKREC
E38603
%s - %s '%s' not found in %s.
MARKREC
E38604
%s - Valid record range is 1 - %d.
MARKREC
E38605
%s - No records in calling list
MARKREC
E38800
%s - key fields not the same length
MARKREC
E38801
%s - Key '%s' not found in hash file
MARKREC
E38802
%s - Error allocating memory for '%s'
MENU
E39000
Failed to find user logon entry %s in V/L login file
MENU
E39001
Error _ No Menu Name
MENU
E39002
Help File Not Found: %s
MENU
E39003
Menu File Not Found: %s
MENU
E39004
MENU(%d)Signal Interrupt=%d
MENU
E39005
%s - User not authorized to run this menu - %s
MENU
E39200
Incorrect Item Number
MENU
E39201
Failed to Search Directory for File Extension: %s
MENU
E39202
Invalid list number
PCEXTRA
E40000
No Calling Statistics Files Available
PCEXTRA
E40001
PC Analysis - Reopen of %s failed
PCEXTRA
E40002
PC Analysis - Invalid File Type of %c
PCEXTRA
E40003
No Agent Files Available
PCEXTRA
E40200
Pc Analysis - Unknown Type %c for Input File type
PCEXTRA
E40201
File Name not Found
PCEXTRA
E40202
File does not Exist
PCEXTRA
E40203
In Help mode, Cannot Select Criteria
PCEXTRA
E40204
Invalid Field Order Select Number
PCEXTRA
E40400
%s - Invalid config file name
PCEXTRA
E40401
Invalid Extraction Type
Maintenance and Troubleshooting Guide
March 2008
PREPROC
E42000
-S option must be used with -i option
PREPROC
E42100
-S option must be used with -i option
PREPROC
E42101
Third argument must be -c
PREPROC
E42400
%s - Failed hash open of %s
PREPROC
E42401
%s - Failed to stat associated calling list %s
PREPROC
E42402
%s - %s : %s
PREPROC
E42403
%s - Associate list and hash index date/time do not
agree for %s. Run clhash
PREPROC
E42404
%s - Field %s length %d not match hash key %s
length %d
PREPROC
E42405
Record number %s too big for field %s
PREPROC
E42406
%s - Record number %s too big for field %s
PREPROC
E42600
Field undefined in the calling list
PREPROC
E42601
Gap found between field names within group
PREPROC
E42602
Missing assigned field values
PREPROC
E42603
Gap found in value selections
PREPROC
E42604
Field value has an invalid character
PREPROC
E42605
Missing Range or Item specification in field values
PREPROC
E42606
Values not in ascending order
PREPROC
E42607
No fields selected for reporting
PREPROC
E42608
Miss value in filler criteria
PREPROC
E42609
Miss field name in filler criteria
PREPROC
E42610
Pattern Error: %s
PREPROC
E42611
'ALL' cannot co-exist with other selections
PREPROC
E42612
Unknown call completion code
PREPROC
E42613
%s - Unknown select file %s
PREPROC
E42614
%s - Unknown supplement file %s
PREPROC
E42615
Invalid code. Type R for row, C for column or T for
table.
PREPROC
E42616
Invalid line number
Maintenance and Troubleshooting Guide
March 2008
95
96
PREPROC
E42617
Cannot move to same location
PREPROC
E42800
Invalid number indicator: %s
PREPROC
E42801
-S option must be used with -i option
PREPROC
E43000
%s - Match field %s length %d not match associated
field %s length %d
PREPROC
E43001
Record %d - Bad Record number in field %s
PREPROC
E43002
%s - Record %d - Assoc list %s read error(%d) for
record no. %d
PREPROC
E43200
Record %d - Too many records in set
PREPROC
E43201
%s - Record %d - Too many records in set
PREPROC
E43400
TERMINAL ERROR
PREPROC
E43401
Record %d - READ ERROR (%d)
PREPROC
E43402
Record %d - WRITE ERROR (%d)
PREPROC
E43403
Record %d - HASH ERROR (%d)
PREPROC
E43404
%s - Failed hash initialization!
PREPROC
E43405
%s - Failed to stat calling list %s
PREPROC
E43406
%s - Record %d - READ ERROR (%d)
PREPROC
E43407
%s - Record %d - HASH ERROR (%d)
PREPROC
E43408
%s - Record %d - WRITE ERROR (%d)
PREPROC
E43500
Calling List %s open error
PREPROC
E43501
Calling List %s header error
PREPROC
E43502
Calling List %s definition error
PREPROC
E43503
Field name %s missing in Calling List %s
PREPROC
E43504
Error initializing LISTS hash file %s
PREPROC
E43505
Error hashing record %d in Calling List %s. Errcode
= %d
PREPROC
E43506
Error writing hash record %d in hash file %s. Errcode
= %d
PREPROC
E43507
System_value %d too big. Limit is MAXMSGS
PREPROC
E43508
Record %d - READ ERROR
PREPROC
E43509
Record %d - WRITE ERROR
Maintenance and Troubleshooting Guide
March 2008
PREPROC
E43510
Record %d - CALLING LIST BUFFER MALLOC
ERROR
PREPROC
E43511
Error: colon missing on line %s:%s
PREPROC
E43512
%s:%s, Field name %s missing in Calling List %s
HISTORY
E44000
%s - Bad arguments
HISTORY
E44001
%s - Memory allocation error
HISTORY
E44002
%s - File access error
HISTORY
E44003
%s - Equation syntax error
HISTORY
E44004
%s - Invalid format code
HISTORY
E44005
%s - Report configuration error
HISTORY
E44006
%s - No HISTORY variable in master.cfg
HISTORY
E44007
%s - History dictionary error
HISTORY
E44008
%s - Incorrect sort field name
HISTORY
E44009
%s - Failed to open report format file
HISTORY
E44010
%s - Failed to write output report file
HISTORY
E44011
%s - No record selection criteria given
HISTORY
E44012
%s - Failed to open input file
HISTORY
E44013
%s - Failed to set/reset record lock
HISTORY
E44014
%s - job and report format type are not compatible
RPT_MGR
E45000
rpt_view - Caught signal %d and terminated
RPT_MGR
E45001
Incorrect Report Number
RPT_MGR
E45200
File name for view missing
RPT_MGR
E45201
pds_view - Caught signal %d and terminated
RPT_MGR
E45202
REPORT %s NOT FOUND
RPTGEN
E46200
Invalid line number
RPTGEN
E46201
Exceeded maximum number of expressions
RPTGEN
E46202
Invalid PAGE flag
RPTGEN
E46203
Invalid RESET flag
RPTGEN
E46204
Missing expression name
Maintenance and Troubleshooting Guide
March 2008
97
98
RPTGEN
E46205
Unknown operator: %s
RPTGEN
E46206
Missing operator
RPTGEN
E46207
Too many operands for operator '%s'
RPTGEN
E46208
Missing operand for operator '%s'
RPTGEN
E46209
%s is undefined in the printcap file
RPTGEN
E46210
%s is undefined in the dictionary
RPTGEN
E46211
Unknown variable name %s
RPTGEN
E46212
Unmatching ' in literal string %s
RPTGEN
E46213
Unknown data type: %s
RPTGEN
E46214
Invalid data type for operator %s
RPTGEN
E46400
No expression located at cursor position
RPTGEN
E46401
Insufficient memory for screen buffer allocation
RPTGEN
E46402
End of file reached
RPTGEN
E46403
No lines in buffer
RPTGEN
E46404
Invalid starting location - expression overlap
RPTGEN
E46405
Invalid ending location - expression overlap
RPTGEN
E46406
Must specify start location
RPTGEN
E46407
Invalid ending location
RPTGEN
E46408
Exceeded maximum report dimensions
RPTGEN
E46409
Failed to open format temp file
RPTGEN
E46410
Invalid line marker at line %d
RPTGEN
E46411
Invalid starting location
RPTGEN
E46412
Invalid ending location
RPTGEN
E46600
No entries in printcap file
RPTGEN
E46601
No entries in file dictionary
RPTGEN
E46602
No expressions defined in file
RPTGEN
E46603
Failed to open report list file
RPTGEN
E46800
Failed to list defined printer model names
RPTGEN
E46801
Failed to read printcap file
Maintenance and Troubleshooting Guide
March 2008
RPTGEN
E46802
Unknown printer model
RPTGEN
E46803
Report -
RPTGEN
E46804
Failed to get defn. for calling list
RPTGEN
E46805
File name missing
RPTGEN
E46806
Failed to open text substitution file
RPTGEN
E46807
Report control file name too long
RPTGEN
E46808
Failed to write report control file
RPTGEN
E46809
Failed to read report help file
RPTGEN
E46810
Failed to open report control file: %s
RPTGEN
E46811
Unknown report control file: %s
SCRNBLD
E47000
Failed to initialize
SCRNBLD
E47001
Failed to read command keys file
SCRNBLD
E47002
Terminal Screen too small for screen editor.
SCRNBLD
E47003
May not shift fields further
SCRNBLD
E47004
Only Date, Time, or Numeric fields may have
Verification Formats
SCRNBLD
E47005
Field does not fit in screen.
SCRNBLD
E47006
May not overlay screen labels.
SCRNBLD
E47007
May not place fields in column one.
SCRNBLD
E47008
May not overlap screen fields.
SCRNBLD
E47009
May only edit lists [1..%d]
SCRNBLD
E47010
%s(ScreenBuilder) - Failed to open output report file
SCRNBLD
E47011
May not change to the same file dictionary.
SCRNBLD
E47012
No Jobs available
SCRNBLD
E47013
No jobs use the current screen
SCRNBLD
E47014
Screen does not exist:
SCRNBLD
E47015
No changes made.
SCRNBLD
E47016
UNFINISHED COMMAND: TESTMODE
SCRNBLD
E47017
Invalid %s number specified=%d.
Maintenance and Troubleshooting Guide
March 2008
99
100
SCRNBLD
E47018
Cut & Paste Field Not %s
SCRNBLD
E47019
You may not PASTE over fields.
SCRNBLD
E47020
Fields may not start in column one.
SCRNBLD
E47021
Field in block does not fit on screen.
SCRNBLD
E47022
Fields may not overlap.
SCRNBLD
E47023
Block must fit on screen.
SCRNBLD
E47024
Field[%s,%d] does not match dictionary.
SCRNBLD
E47025
Not enough menu options
SCRNBLD
E47026
ERROR: no screen open
SCRNBLD
E47027
Failed to write screen file
SCRNBLD
E47028
Save to a different name.
SCRNBLD
E47029
You may not %s the current edit screen.
SCRNBLD
E47030
NO HELP TABLE
SCRNBLD
E47031
Protected file.
SCRNBLD
E47032
Use a different name.
SCRNBLD
E47033
Invalid sequence number specified=%d.
SCRNBLD
E47034
Invalid field number specified=%d.
SCRNBLD
E47035
Cut & Paste Field Not Copied
SCRNBLD
E47036
Cut & Paste Field Not Cut, or Copied
SCRNBLD
E47037
Cut & Paste Field Not Cleared
SCRNBLD
E47038
You may not delete the current edit screen.
SCRNBLD
E47039
You may not recover the current edit screen.
SCRNBLD
E47040
Failed to initialize Screen
SCRNBLD
E47041
Failed to initialize Keyboard
SWIFEXC
E48000
Conflicting interface types specified.
SWIFEXC
E48001
swif - virtual ports specified are out of range, using
defaults
SWIFEXC
E48002
Failed to make Ethernet connection to switch. Giving
up!
Maintenance and Troubleshooting Guide
March 2008
SWIFEXC
E48003
Failed to make Ethernet connection to switch.
retry=%d, code=%d
SWIFEXC
E48004
*** %d=swie_open() retry=%d failed
SWIFEXC
E48005
swif_ct - failed to start. Giving up
SWIFEXC
E48006
CTI Link Failure
SWIFEXC
E48007
CTI Link Recovery
SWIFEXC
E48008
Could not open password configuration file.
SWIFEXC
E48009
Could not read password configuration file.
SWIFEXC
E48010
CTI Error: %s
SWIFEXC
E48011
CTI Error: %s %d
SWIFEXC
E48012
ReasonCode (%d) is out of range.
SWIFEXC
E48013
CTI not configured for agent events.
SWIFEXC
E48014
Unable to register for CTI System Status Events
SWIFEXC
E48015
No Call for Route Request: RegReqID = %d,
CrossRefID = %d, CallID = %d
SWIFEXC
E48016
No invoke id for CTI confirmation event: %s %d
SWIFEXC
E48017
Insert into STL Map failed, Map name = %s
SWIFEXC
E48018
Feature Request for agent event failed, error = %d
SWIFEXC
E48019
RecvSysStat - unknown systemStatus = %d
SWIFEXC
E48020
TSAPI Command (%s) failed, error = %d
SWIFEXC
E48021
Sent Connect Request after Hangup Request. Porter
= %d
SWIFEXC
E48022
Invalid Prompt_id (%d)
SWIFEXC
E48023
Unknown Confirmation event type (%d)
SWIFEXC
E48024
TSAPI Command (%s) failed, error = %d, Unable to
UUI.
SWIFEXC
E48025
CSTAUniversalConfEvent for Call Monitor, error =
%d.
SWIFEXC
E48026
No available phantom numbers for acquiring an
agent
SWIFEXC
E48027
Route End Error: RegReqID = %d, CrossRefID = %d,
Error = %d
Maintenance and Troubleshooting Guide
March 2008
101
102
SWIFEXC
E48028
OnEventEstablished: Unknown command (%d)
SWIFEXC
E48029
Unable to play voice message, unknown agent
extension %s
SWIFEXC
E48030
Unknown Agent Event (%d), extension (%s)
SWIFEXC
E48031
Unable to get hostname to send to the Service
Monitor.
SWIFEXC
E48032
Unable to send soe_message to the Service Monitor.
SWIFEXC
E48033
Unable to create the soe mailbox (%s) error (%d)
SWIFEXC
E48034
CSTAUniversalConfEvent (%d) for Phantom number
(%s).
SWIFEXC
E48035
Unable to set up communications with the server's
message queue.
SWIFEXC
E48036
MakeCall/MakePredictiveCall/TransferCall Confirm
error (%d).
SWIFEXC
E48037
%s: Confirm error (%d).
SWIFEXC
E48038
OnEventEstablished: SWIF_RESOURCE_LIMIT cause (%d)
SWIFEXC
E48400
Opmon - Unable to setup channel with swif
SWIFEXC
E48401
Opmon - Unable to setup input IPC.
SWIFEXC
E48402
Opmon - Unable to attach to data segment
SWIFEXC
E48403
Opmon - Unable to load operator line configuration
SWIFEXC
E48404
Opmon - Invalid number of operators configured.
SWIFEXC
E48405
Opmon failed to get time of day to process timeouts
SWIFEXC
E48406
Opmon failed to get time of day to set timeout
SWIFEXC
E48407
Opmon: Unable to start dialback
SWIFEXC
E48408
Opmon received bad headset: %d
SWIFEXC
E48409
Opmon bad headset type: %d, hs=%d
SWIFEXC
E48410
Opmon received unknown command: %s
SWIFEXC
E48411
Opmon unable to find string for msg code %d
SWIFEXC
E48412
Opmon : Signal Abort:%s(%d)
SWIFEXC
E48413
OPERATOR MONITOR ENABLE FAILED: (%d)%s
Maintenance and Troubleshooting Guide
March 2008
SWIFEXC
E48414
OPMON DIALBACK FAILURE:
(%d)%s,ns=%x,rsb=%x,cause_IE=%x
SWIFEXC
E48415
NO HEADSET ASSIGNED TO KEY
SWIFEXC
E48416
OPERATOR TYPE MISMATCH FOR HEADSET
AND KEY
SWIFEXC
E48417
OPERATOR TYPE FOR KEY IS INVALID
SWIFEXC
E48418
UNKNOWN COMMAND
SWIFEXC
E48419
INVALID GROUP CONFIGURATION FOR
DIAL-BACK
SWIFEXC
E48420
Opmon - Unable to setup agent_mgr IPC.
SWIFEXC
E48421
Invalid DBKGRP in master.cfg
SWIFEXC
E48422
Number in DBKGRP and NUM_OF_PBXS in
master.cfg is inconsistent
SWIFEXC
E48423
Opmon: swif_ct communication failure
SWIFEXC
E48600
Missing or invalid headset id
SWIFEXC
E48601
Missing or invalid CFGTIME value
SWIFEXC
E48602
opmon.cfg - Headset configuration has changed
SWIFEXC
E48603
opmon.cfg - Changes will not take effect until reboot
SWIFEXC
E48604
Duplicate headset id %d (L%d)
SWIFEXC
E48605
Missing comma-separated fields
SWIFEXC
E48606
Duplicate key %s
SWIFEXC
E48607
Missing or invalid key
SWIFEXC
E48608
Missing or invalid phonenum
SWIFEXC
E48609
Single value required (not range)
SWIFEXC
E48610
Missing or invalid dial-in login timeout
SWIFEXC
E48611
Missing or invalid group number
SWIFEXC
E48612
A DIALBACK line must precede this line
SWIFEXC
E48613
Dialback phone number too long with prefix
SWIFEXC
E48614
Dialback phone number too long with suffix
SWIFEXC
E48615
Opmon: cleanup abnormal termination of session for
headset %d
Maintenance and Troubleshooting Guide
March 2008
103
104
SWIFEXC
E48616
Missing or invalid ISDN protocol
SWIFEXC
E48800
Opmon failed to get time of day to set timeout
SWIFEXC
E48801
Opmon: Unknown state call %d, hs=%d.
SWIFEXC
E48802
Opmon: Key code already in use by headset %d:
key=%s
SWIFEXC
E48803
Opmon: Unable to play greeting to operator
SWIFEXC
E48804
Opmon: HANGUP FAILED: equip=(%d)%x
SWIFEXC
E48805
Invalid key code entered: key=%s
SWIFEXC
E48806
Opmon: Unable to play prompt %d on equipnum
%d:%s
LIBCPP
E49001
Password verification failed for user: %s, Exception:
%s
UTILITY
E50000
Data File Not in Calling List Format
UTILITY
E50100
Exceeded number of %s agents
UTILITY
E50101
Exceeded wait limit for acceptance
UTILITY
E50200
Invalid time format
UTILITY
E50201
Invalid hour in time
UTILITY
E50202
Invalid minutes in time
UTILITY
E50203
Invalid date format
UTILITY
E50204
Invalid year in date
UTILITY
E50205
Invalid month in date
UTILITY
E50206
Invalid day in date
UTILITY
E50600
No Headset ID Specified.
UTILITY
E50601
Failed to Initialize Keyboard
UTILITY
E50602
Failed to Initialize screen environment
UTILITY
E50603
Failed to create display window.
UTILITY
E50604
Not a pseudo-terminal port
UTILITY
E50605
No response from system, login failed
UTILITY
E50606
Headset ID (%d) Out of Range (1-%d)
UTILITY
E50607
Failed to select Headset ID(%d)
Maintenance and Troubleshooting Guide
March 2008
UTILITY
E50608
Exceeded retry limits, No valid headset ID specified
UTILITY
E50609
Exceeded retry limits, No valid key code specified
UTILITY
E50610
Headset ID (%d) Already in use by %s
UTILITY
E50611
Headset ID (%s) Already in use
UTILITY
E50612
No more Headsets permitted on system
UTILITY
E50613
Failure to access Headset Table
UTILITY
E50800
op_logout: failed to establish input queue for hs %s
UTILITY
E51001
Goodbye...
UTILITY
E51200
No information on keys for job %s
UTILITY
E51201
No such keys file defined named: %s
UTILITY
E51400
Port_start - Failed to get VOICEDIR directory
UTILITY
E51600
No <###tran.stat> files are marked with todays date
UTILITY
E51601
Cannot open file chi_data
UTILITY
E52800
Only single zipcode field is allowed
UTILITY
E52801
Exceeded area code fields limit of (%d)
UTILITY
E52802
Illegal option -%c
UTILITY
E52803
No main option specified
UTILITY
E52804
'-f' option also require '-a' & '-z' option
UTILITY
E52805
Bad pattern specified with '-x' option
UTILITY
E52806
Area code offset can't exceed %d
UTILITY
E53000
%s - Unable to open Calling List '%s'
UTILITY
E53001
%s - Unable to get List Definition for '%s'
UTILITY
E53002
%s - Unable to stat Calling List '%s'
UTILITY
E53003
%s - Unable to open Prepare Check file '%s'. Must
run clhash first.
UTILITY
E53004
%s - Unable to find correct entry for '%s' in Prepare
Check file '%s'. Must run clhashin first.
UTILITY
E53005
%s - Field '%s' not in Calling List '%s'
UTILITY
E53006
%s - Unable to open Associated Calling List '%s'
UTILITY
E53007
%s - Unable to stat Associate List '%s'
Maintenance and Troubleshooting Guide
March 2008
105
106
UTILITY
E53008
%s - Field '%s' not in Associate Calling List '%s'
UTILITY
E53009
%s - Match field '%s' length %d not same as
associated field '%s' length %d!
UTILITY
E53010
%d - READ ERROR (%d)
UTILITY
E53011
%s - Record %d - READ ERROR (%d)
UTILITY
E53012
%d - A READ ERR (%d)
UTILITY
E53013
%s - Record %d - ASSOC READ ERROR (%d)
UTILITY
E53014
%d - WRITE ERROR (%d)
UTILITY
E53015
%s - Associate Record %d - WRITE ERROR (%d)
UTILITY
E53016
%d BAD RECORDS
UTILITY
E53017
%s - %d BAD RECORDS
UTILITY
E53018
%s - %d BAD RECORDS
UTILITY
E53019
%s - Unable to open: %s
UTILITY
E53020
%s - Unknown configuration file %s
UTILITY
E53021
%s - Unable to allocate list buffer
UTILITY
E53022
TERMINAL ERROR
UTILITY
E53023
%s - Usage error
IMON
E53650
compcode.cfg not found
IMON
E53651
INTERNETMONDIR parameter is missing from
master.cfg
IMON
E53652
Internet Monitor shutting down
IMON
E53654
Internet Monitor failed to attach to shared memory conn_mgr may not be running - exiting
IMON
E53655
HTML Page update failed - remote Web server may
no longer be mounted
UTILITY
E53800
Caught error #%d!
UTILITY
E53801
Error %d writing msg '%s' to log file [%s].
UTILITY
E53802
Error: Unable to log system message. Message '%s'
not found.
UTILITY
E53803
Error: Couldn't open file '%s'
UTILITY
E53804
Error formatting message '%s'.
Maintenance and Troubleshooting Guide
March 2008
UTILITY
E53805
Error: Nothing to monitor!
UTILITY
E53806
Error: Unable to open log file %s for appending.
UTILITY
E53807
Error: Couldn't open log file [%s]
UTILITY
E53808
Error: Bad date-time format: [%s]
UTILITY
E53809
Error: Unable to retrieve EVMON filespec from
master.cfg
UTILITY
E53810
Error: Config file [%s] was not found.
UTILITY
E53811
Error: System call auditing is requested but system is
not trusted
UTILITY
E53812
Error: File %s was not found. Make sure system
auditing is turned on.
UTILITY
E53813
Error: Couldn't stat [%s]
UTILITY
E53814
Warning: No 'next' audit log defined.
UTILITY
E53815
Error: Bad update interval value
UTILITY
E53816
Error: Unknown option %c
UTILITY
E53817
Error: Unknown/unimplemented entry in cfg file on
line %d
UTILITY
E53818
Error: The HP-UX auditing system is OFF. Please
use SAM to turn it on.
UTILITY
E53819
Error: Audctl failed: errno=%d
LISTSVR
E54100
Unexpected program exit
LISTSVR
E54101
getservbyname ('%s', tcp) failed
LISTSVR
E54102
socket () failed
LISTSVR
E54103
bind (fd=%d) failed (are clients still connected to
sockets of previous listserver instance?)
LISTSVR
E54104
listen (fd=%d) failed
LISTSVR
E54105
setsockoopt (fd=%d, SO_LINGER) failed
LISTSVR
E54106
setsockoopt (fd=%d, SO_KEEPALIVE) failed
LISTSVR
E54107
accept (fd=%d) failed
LISTSVR
E54108
Usage error
LISTSVR
E54109
Received signal %d -- exiting
LISTSVR
E54110
FD_ISSET (conn_fd=%d) failed
Maintenance and Troubleshooting Guide
March 2008
107
108
LISTSVR
E54111
Write error -- exiting
LISTSVR
E54112
Read error -- exiting
LISTSVR
E54113
File descriptor too large (fd=%d) -- exiting
LISTSVR
E54114
cllstat (fd=%d) failed -- exiting
LISTSVR
E54115
cllrddict (fd=%d) failed -- exiting
LISTSVR
E54120
fork failed -- errno=%d '%s'
LISTSVR
E54121
Unable to open list '%s'
RPTGEN
E55000
Insufficient memory for %s
RPTGEN
E55001
Error reading records
RPTGEN
E55002
Failed to open report output file
RPTGEN
E55200
Group may not begin with no criteria
RPTGEN
E55201
Gap found between select fields
RPTGEN
E55202
Invalid logical connector
RPTGEN
E55203
Missing field name
RPTGEN
E55204
Missing field value
RPTGEN
E55205
Duplicate field name found
RPTGEN
E55206
Invalid sort directive
RPTGEN
E55207
Error Pattern: %s
RPTGEN
E55400
Failed to write text substitution file
RPTGEN
E55600
Invalid number
RPTGEN
E55601
Insufficient memory for %s
IVR
E56001
ivr_supr: Error connecting to socket, errno %d
IVR
E56002
ivr_supr: Unknown command ID:%d
IVR
E56003
ivr_supr: IVR_INTEGRATION not set in master.cfg
IVR
E56004
Invalid IP address: %s
IVR
E56005
No host information is loaded--%s
IVR
E56006
Error - Failed to load user interface files
IVR
E56007
Validation of IVR information failed
IVR
E56008
Invalid IVR ID length: %s
Maintenance and Troubleshooting Guide
March 2008
IVR
E56009
IVR ID not found in /etc/hosts file: %s
IVR
E56010
IVR ID already exists: %s
IVR
E56011
Invalid character in IVR ID: %s
IVR
E56012
An IP address must be entered
IVR
E56013
Fail to add to /etc/hosts: %s
IVR
E56014
IVR ID %s not found
IVR
E56015
Failed to add IVR %s
IVR
E56016
IVR ID already exists in /etc/hosts file: %s
IVR
E56017
Currently connected to IVR %s; cannot change or
delete configuration
IVR
E56018
IVR IP address already exists: %s
IVR
E56019
IVR IP address already found in /etc/hosts file: %s
IVR
E56020
ivr_conn: ivr_conn service not found in /etc/services
IVR
E56021
ivr_conn: Unable to create socket, errno %d - %s
IVR
E56022
ivr_conn: Unable to bind to the socket, errno %d
IVR
E56023
ivr_conn: Unable to connect to the socket, errno %d
IVR
E56024
ivr_conn: Unable to listen to the socket, errno %d
IVR
E56025
ivr_conn: Error in select, errno %d
IVR
E56026
ivr_conn: Error in accept, errno %d
IVR
E56027
ivr_conn: Error on recv from supervisor socket, errno
%d
IVR
E56028
ivr_conn: Nothing read from supervisor socket, errno
%d
IVR
E56029
ivr_conn: Unknown message '%s:%s' from
supervisor socket
IVR
E56030
ivr_conn: Error on recv from IVR socket, errno %d
IVR
E56031
ivr_conn: Nothing read from IVR socket, errno %d
IVR
E56032
ivr_conn: Unknown message (%c) from IVR socket
IVR
E56033
ivr_conn: Invalid message (%s) in input IPC queue
IVR
E56034
ivr_conn: Unable to set socket to FIOASYNC, errno
%d
Maintenance and Troubleshooting Guide
March 2008
109
110
IVR
E56035
ivr_conn: Unable to set socket to FIOSNBIO, errno
%d
IVR
E56036
ivr_conn: Unable to set process to receive SIGIO,
errno %d
IVR
E56037
ivr_conn: Send error, client %d (still trying)
IVR
E56038
ivr_conn: Send error, client %d (giving up)
IVR
E56039
IVR
E56040
ivr_conn: Error in select in MicroSleep, errno %d
IVR
E56041
ivr_conn: Fail to write to pipe - sd %d
IVR
E56042
ivr_conn: Caught signal %d, err %d
IVR
E56043
ivr_conn: sigaction failed in InitSigHandlers
IVR
E56044
ivr_conn: IVR pool job '%s' does not exist
IVR
E56045
ivr_conn: Error in trying to access IVR pool job '%s';
errno = %d
IVR
E56046
ivr_conn: Already connected to IVR '%s'
IVR
E56047
ivr_conn: Not connected to IVR '%s'
IVR
E56048
ivr_conn: Still connected to IVR '%s'
IVR
E56049
ivr_conn: Reset of IVR '%s' in progress, please wait...
IICB
E57000
Dispatcher startup soe_init error: %d
IICB
E57001
Dispatcher startup invalid argument count: %d
IICB
E57002
Linked list insert error: %d for list: %s
IICB
E57003
Linked list create error: %d for list: %s
IICB
E57004
Unable to find opmon IPC
IICB
E57005
Unable to create dispatcher mailbox <%s>, error: %d
IICB
E57006
Cleaning up received fatal signal: %d
IICB
E57007
Error: %d deleting dispatcher mailbox
IICB
E57008
Send message error: %d <%s>
IICB
E57009
Error trying to malloc space: <%s>
IICB
E57010
Error opening file: <%s>
IICB
E57011
Unexpected object: %d msgtype: %d from md: %d
: err=%d sent=%d rem=%d dt=%d try=%d
Maintenance and Troubleshooting Guide
March 2008
IICB
E57012
Invalid msgtype: %d from md: %d
IICB
E57013
Receive message error: %d
IICB
E57014
Unknown mode %s: %d
IICB
E57015
Attribute not found: %d
IICB
E57016
Linked list queuing error: %s
IICB
E57017
Invalid mailbox: %s
IICB
E57018
Invalid event: %d %s
IICB
E57019
Unable to register to mailbox <%s>, error: %d
IICB
E57020
Duplicate acquire request on vdn <%s>
IICB
E57021
Not enough licenses - Max acquire agents: %d
IICB
E57022
Invalid attribute: %d %s
IICB
E57023
Unexpected call connect for call_id: %d
IICB
E57024
Unexpected call made to vdn: <%s> scai_link: %d
IICB
E57025
Call reject error: %d for call_id: %d
IICB
E57026
Invalid job id: %d
IICB
E57027
Unexpected create call for call_req_id: %d
IICB
E57028
Invalid action: %d %s
IICB
E57029
Invalid process state: %d %s
IICB
E57030
Extension <%s> is already in use by user: %d
IICB
E57031
Error: %d as a response to: <%s> message
IICB
E57032
Unknown resp_type event: %d
IICB
E57033
Unexpected response objid: %d, invokeid: %d
IICB
E57034
Process <%s> not responding to msg: <%s>
IICB
E57035
Get time error: <%d>, will try again
IICB
E57036
Invalid timeout event: <%d>
IICB
E57037
Voice message not defined: <%d>
IICB
E57038
Extension <%s> scai_link: %d is not installed
IICB
E57039
Expected timeout <%s> not found, call_id: <%d>
IICB
E57040
Expected timeout <%s> not found, vdn: <%s>
Maintenance and Troubleshooting Guide
March 2008
111
112
IICB
E57041
Release of pbx ext <%s> which is not fully acquired
IICB
E57042
User id %d was already in use
IICB
E57043
User ext <%s> scai_link <%d> is not found
IICB
E57044
Unable to read acd_license.cfg, error: <%d>
CORE
E58002
%s - Unable to initialize soe (%d)
JOBCTRL
E59500
Job %s not currently running.
JOBCTRL
E59501
Illegal parameters: %s
JOBCTRL
E59502
Job %s not ready.
JOBCTRL
E59503
Job name not specified: %s
JOBCTRL
E59505
Job(%s) not linkable
JOBCTRL
E59506
Malloc failure in list_agents
JOBCTRL
E59507
Inbound capable jobs only: %s
JOBCTRL
E59508
Outbound capable jobs only: %s
JOBCTRL
E59509
Monitoring of operator disabled
JOBCTRL
E59510
Error, no operator %s on job %s
JOBCTRL
E59511
Managed dialing capable jobs only: %s
JOBCTRL
E59512
Illegal time zone: %s
JOBCTRL
E59513
Illegal action %s
JOBCTRL
E59514
Inbound capable jobs only
JOBCTRL
E59516
Outbound capable jobs only
JOBCTRL
E59517
Managed dialing capable jobs only
JOBCTRL
E59518
Illegal time zone name %c
JOBCTRL
E59519
Unable to open transfer lock file %s
JOBCTRL
E59520
Not a multi-unit job: %s
JOBCTRL
E59521
No units currently available
JOBCTRL
E59522
Illegal units %s
JOBCTRL
E59527
Job name not specified
JOBCTRL
E59528
Job linking capable jobs only
JOBCTRL
E59530
Job not currently linked
Maintenance and Troubleshooting Guide
March 2008
JOBCTRL
E59531
Invalid port for monitoring agents
JOBCTRL
E59533
Warning: Operator already being transferred.
JOBCTRL
E59534
Job1 %s not ready.
JOBCTRL
E59535
Job2 %s not ready.
JOBCTRL
E59539
Illegal change %s
JOBCTRL
E59540
Headset ID (%s) already in use
JOBCTRL
E59541
No more headsets permitted on system
JOBCTRL
E59542
Failure to access headset table
JOBCTRL
E59596
No operator slot available
JOBCTRL
E59597
System is not running
JOBCTRL
E59598
Illegal parameters
JOBCTRL
E59599
Bad command
JOBCTRL
E59600
Not a Cruise Control job
EVENTSERVER
E61000
%s failed: Exception %s; Id %ul
EVENTSERVER
E61001
Exception raised: %s
EVENTSERVER
E61002
Failed to create thread
EVENTSERVER
E61003
Caught unknown exception
EVENTSERVER
E61004
Failed to write to IOR file %s
EVENTSERVER
E61005
Failed to initialize signal handlers
EVENTSERVER
E61006
Failed to initialize %d
EVENTSERVER
E61007
attach_datashm () failed -- is system up?
EVENTSERVER
E61008
Number of line pools defined in LINEASSIGN in
master.cfg (%d) exceeds value of
MAX_LINEASSIGN_LABELS (%d)
EVENTSERVER
E61009
Exceeded max limit of inactive jobs (%d); skipping
the rest
EVENTSERVER
E61040
CosNaming NamingContext not found
EVENTSERVER
E61041
CosNaming NamingContext cannot proceed
EVENTSERVER
E61042
CosNaming NamingContext invalid name
EVENTSERVER
E61043
CosNaming NamingContext already bound
Maintenance and Troubleshooting Guide
March 2008
113
114
DCCS
E62000
(%s): Operation %s is not implemented
DCCS
E62001
(%s): Operation %s is not applicable to object %s
DCCS
E62002
(%s): Requested column %s not available in table %s
DCCS
E62003
(%s): Invalid predicate expression %s: %s
DCCS
E62004
(%s): Invalid column name %s in predicate
expression
DCCS
E62005
(%s): Record %s is locked by owner %s
DCCS
E62006
(add_lock): failed for Record %s Owner %s
DCCS
E62007
(%s): lock for Record %s Owner %s is no longer valid
DCCS
E62008
(%s): internal error - no data
DCCS
E62009
(%s): no values for input
DCCS
E62010
(%s): Operation %s requires %s
DCCS
E62011
(%s): Operation %s: Invalid parameters
DCCS
E62012
(%s): Record %s is not locked by owner %s, current
owner is %s
DCCS
E62013
(%s): Requested row %s not available in table %s
DCCS
E62014
Unable to create file %s, errno = %d
DCCS
E62015
Unable to open file %s for read/write, errno = %d
DCCS
E62016
Unable to open file %s for update, errno = %d
DCCS
E62017
Unable to open file %s for readonly, errno = %d
DCCS
E62018
Unable to delete file %s, errno = %d
DCCS
E62019
Unable to create file %s, file already exists
DCCS
E62020
General Exception - Table: %s Method: %s
DCCS
E62021
File %s does not exist, errno = %d
DCCS
E62022
(%s): Operation %s requires Record ID as one of the
query conditions
DCCS
E62023
Incorrect Table Type
DCCS
E62024
(%s): lock_record - Unknown locktype %s
DCCS
E62025
(%s) [%#x] : %s(): Error %#x [%s] %s occurred
DCCS
E62026
(%s) [%#x] : %s(): Error %#x %s occurred\n
Maintenance and Troubleshooting Guide
March 2008
DCCS
E62027
Platform Exception - Table: %s Method: %s
DCCS
E62028
%s - Error allocating memory
DCCS
E62029
(%s): Invalid Message Queue handle
DCCS
E62030
(%s): Invalid agent name
DCCS
E62031
(%s): Invalid headset ID
DCCS
E62032
(%s): Failed to connect to shared memory
DCCS
E62033
(%s): Failed to connect to agent %s shared memory
DCCS
E62034
(%s): Agent %s is not active
DCCS
E62035
(%s): Agent %s is already monitored by line %d
DCCS
E62036
(%s): Failed to get IPC key for job: %s
DCCS
E62037
(%s): Failed to open IPC for %s
DCCS
E62038
(%s): Invalid message to notify agent(s)
DCCS
E62039
(%s): Failed to connect to job %s shared memory
DCCS
E62040
Lock expired for Record: %s, Owner: %s
DCCS
E62041
Unable to fill required field %s for Job %s
DCCS
E62042
(%s): Selection Index Failure: Could not verify
selection %s with list %s. Run Verify Selection to find
specific errors.
DCCS
E62043
(%s): Invalid agent name selection pattern '%s'
DCCS
E62044
(%s): Selection Index Failure: Could not verify
strategy %s with list %s. Run Verify Strategy to find
specific errors.
DCCS
E62045
(%s): Shared memory object not associated with job:
%s
DCCS
E62046
Invalid parameters for setting %s
DCCS
E62047
Number of Call Strategy Control items requested is
greater than allowed on system
DCCS
E62048
Requested value less than minimum value.
DCCS
E62049
Unable to start job - job file in use by character user
interface.
DCCS
E62050
Unable to start job - lock on file failed.
DCCS
E62051
Unable to start job - job file in use by %s
Maintenance and Troubleshooting Guide
March 2008
115
116
DCCS
E62052
File %s in use by character user interface.
DCCS
E62053
Lock on file failed.
DCCS
E62054
No response from Job Starter for %s
DCCS
E62055
Invalid response from Job Starter for %s
DCCS
E62056
Failed check for required fields due to lock on job file
DCCS
E62057
(%s): Invalid index process handle
DCCS
E62058
(%s): Unable to locate status for calling index
process handle '%s'
DCCS
E62059
(%s): Failed to send a notification to agent %s
DCCS
E62060
Invalid file name: %s
DCCS
E62061
(%s): Communication with remote list server failed
when processing %s calling list and %s calling
selection
DCCS
E62062
(%s): Invalid Next Phone definition from phone %s to
phone %s that creates infinite loop
DCCS
E62070
%s(%d): Syntax error: %s
DCCS
E62071
%s(%d): Error in command '%s': %s
DCCS
E62072
Unknown variable name '%s'
DCCS
E62073
Unexpected error in script definition
DCCS
E62074
Total number of lines %d exceeds maximum allowed
(must be %d or less)
DCCS
E62075
Invalid field name '%s'
DCCS
E62076
Invalid number of days %d
DCCS
E62077
Invalid number of hours %d
DCCS
E62078
Invalid number of minutes %d
DCCS
E62079
Invalid audio message ID value %d
DCCS
E62080
Invalid time interval value %d
DCCS
E62081
Invalid relational operator '%s'
DCCS
E62082
Invalid completion code keyword '%s'
DCCS
E62083
(%s): Failed to initialize XML processor: %s
DCCS
E62084
(%s): Failed to terminate XML processor: %s
Maintenance and Troubleshooting Guide
March 2008
DCCS
E62085
(%s): Failed to initialize XSLT processor: %s
DCCS
E62086
(%s): Failed to terminate XSLT processor: %s
DCCS
E62087
(%s): XML processing failed: %s
DCCS
E62088
(%s): XML/DOM processing failed
DCCS
E62089
(%s): XSLT processing failed: %s
DCCS
E62090
Invalid element '%s'
DCCS
E62091
(%s): Failed to compile XSLT stylesheet '%s'
DCCS
E62092
Invalid label length '%s' (must be %d bytes or less)
DCCS
E62093
Referenced label '%s' not defined
DCCS
E62094
Command '%s' malformed
DCCS
E62095
(%s) Operation %s:%s failed during validation
DCCS
E62096
Duplicate label '%s' definition (first definition found in
file %s, line %d)
DCCS
E62097
File not open
DCCS
E62098
Unable to seek to beginning of file
DCCS
E62099
File %s is not a valid audio message file
DCCS
E62100
Combined size of audio messages of %d kB (approx.
%02d:%02d minutes) exceeds the total storage
capacity %d kB (approx. %02d:%02d minutes) on
PG230 board
DCCS
E62101
Total number of audio messages %d exceeds the
limit of %d messages
DCCS
E62102
Referenced %s audio message not available on the
system
DCCS
E62103
Audio message ID %d exceeds the the limit of
highest ID value %d
DCCS
E62104
Using a reserved audio message ID %d
DCCS
E62105
Invalid attribute keyword '%s'
DCCS
E62106
Invalid attribute value '%s' for keyword '%s'
DCCS
E62107
Cannot start monitor agent '%s' audio when on a
shadow job
DCCS
E62108
Cannot stop monitor agent '%s' audio when on a
shadow job
Maintenance and Troubleshooting Guide
March 2008
117
118
DCCS
E62109
Cannot send a message to '%s' agent when on a
shadow job
DCCS
E62110
Cannot remove an agent '%s' when on a shadow job
DCCS
E62111
Cannot transfer agent '%s' when on a shadow job
DCCS
E62112
Record is already locked by current user '%s'
DCCS
E62113
Record is not locked. Current user '%s'
DCCS
E62114
Unknown lock state. Current user '%s'
CCS
E63000
Unable to send a message to Dialer: %s Object: %s
AGENTAPI
E70000
Incorrect number of arguments
AGENTAPI
E70001
Incorrect message type
AGENTAPI
E70002
Timed out waiting for %s
AGENTAPI
E70003
Incorrect job type
AGENTAPI
E70004
Command failed
AGENTAPI
E70005
Incoming command exceeded maximum buffer size
AGENTAPI
E70006
Must select unit
AGENTAPI
E70007
Cannot transfer inbound call
AGENTAPI
E70008
Must specify transfer job
AGENTAPI
E70009
Unable to send message to %s
AGENTAPI
E70010
Conference in progress
AGENTAPI
E70011
Call blending is not available
AGENTAPI
E70012
Password has expired
AGENTAPI
E70013
Password can not be changed, change limit not
expired
AGENTAPI
E70014
Password can not be changed, password file locked
AGENTAPI
E70015
Unable to become root privilege for setting password
AGENTAPI
E70016
Original password is invalid
AGENTAPI
E70017
New password entered is invalid
AGENTAPI
E70018
IVR_SCRIPT is blank in job %s
AGENTAPI
E70019
Job %s is not valid for IVR agents
HEALTHMON
E72000
%s can't initialize signal handlers
Maintenance and Troubleshooting Guide
March 2008
HEALTHMON
E72010
%s server name AlreadyBound. ignored
HEALTHMON
E72030
%s server name resolve CannotProceed
HEALTHMON
E72040
%s server name resolve InvalidName
HEALTHMON
E72050
%s Caught CORBA system exception: err=%s
HEALTHMON
E72051
%s Caught CORBA exception: err=%s
HEALTHMON
E72052
%s Caught CORBA TRANSIENT error.
HEALTHMON
E72060
%s Caught unknown exception
HEALTHMON
E72070
%s is NotFound
HEALTHMON
E72080
failed to write %s IOR
HEALTHMON
E72090
%s:: Caught LogOnOffError exception(%d, %s)
HEALTHMON
E72100
function %s failed!
HEALTHMON
E72110
failed to create %s!
HEALTHMON
E72120
can not start activation, %s!
HEALTHMON
E72130
failed on starting a %s thread.
HEALTHMON
E72140
reqID=%d, failed to add request.
HEALTHMON
E72150
failed to load %s.
HEALTHMON
E72160
%s: failed on %s.
HEALTHMON
E72170
reqID=%d, Failed to execute child process =%s.
cmd=%s, errno=%d, ret=%d
HEALTHMON
E72180
reqID=%d, Failed to start the service=%s
HEALTHMON
E72190
reqID=%d, Caught DSAError.failed to stop the
service=%d
HEALTHMON
E72200
reqID=%d, Caught unknown exception. failed to stop
the service=%d
HEALTHMON
E72210
%s: reqID=%d, the reference no longer denotes an
existing obj
HEALTHMON
E72220
%s: reqID=%d, could not decide whether or not obj
exists.
HEALTHMON
E72230
%s: reqID=%d, failed on calling observer's Update
method.
HEALTHMON
E72240
%s: reqID=%d, cmd=%s, caught unknown exception.
%s
Maintenance and Troubleshooting Guide
March 2008
119
120
HEALTHMON
E72250
%s: reqID=%d, Failed to %s. cmd=%s, errno=%d,
ret=%d
HEALTHMON
E72260
%s: Failed to convert from char to LocText
HEALTHMON
E72270
%s: the event either is NOT found or is not supported
or there is no info for the event.
HEALTHMON
E72280
%s: Caught SubError. SubError is: errorID =%s,
msg=%s.
HEALTHMON
E72290
%s: input param ObserverIF_ptr is null.
HEALTHMON
E72300
%s: Create error=%d on mailbox: %s
HEALTHMON
E72310
%s: Create error on mailbox: %s
Maintenance and Troubleshooting Guide
March 2008
Troubleshooting questions
The following sections each contain questions to ask the customer to help gather information for
troubleshooting:
●
Unable to start jobs
●
List did not download
●
Reports not working
●
Call completion codes such as line Idle, busy, or hung up in queue, appears excessively
●
Internet Monitor issues
●
Changes affecting performance
●
Agent key files
●
Back ups
●
Data pops (slow or none)
●
Predictive Blend not acquiring
If further questioning is necessary, see Detailed troubleshooting questions.
For in depth problem solving on many issues, see Avaya Proactive Contact Troubleshooting.
Unable to start jobs
To help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the job?
a. What is the start time of the job?
b. What is the stop time of the job?
c. Is the job an Inbound, Blend, or Outbound job?
2. What list is the job using to run?
3. What record selection are you using?
a. Was the record selection run?
b. How many records were selected?
4. What strategy are you using?
5. Where are you starting it? Have the customer try starting the job using both options:
Maintenance and Troubleshooting Guide
March 2008
121
a. In Editor (GUI or windows point and click)
b. In Administrator (UNIX or telnet window)
6. What errors did you get?
7. Has the job ever worked? If so when was the last time it worked?
8. Have there been any changes to the job?
For further job troubleshooting help see Jobs.
List did not download
To help troubleshoot the issue, have the customer answer these questions:
1. What list did not download?
2. Has the customer tried to do a manual download?
3. Were there any errors?
a. If the download is stuck at time zoning, have the customer back out of all jobs that are
running.
b. If they received the error "ERROR -- No Download Received", have the customer
contact their host to see if the file was sent.
4. Has this list ever downloaded successfully?
a. If yes, when was the last time?
b. If no, did they create this list with "Supervisor"?
c. If yes, see Supervisor.
5. Is there any other list they can work off at this time?
a. If answer is yes, then the Severity is "1a Impaired".
b. If the answer is no, then the Severity is "0 Down" follow the routing steps located on
page #8 of the Survival Guide.
For more troubleshooting help on lists, see Check list.
122
Maintenance and Troubleshooting Guide
March 2008
Agent cannot connect- dialback failure - unable to login headset in use
To help troubleshoot the issue, have the customer answer these questions:
1. How many agents are affected, and how many agents do you have?
a. What is the affected agent's log in?
b. Has the agent logged in successfully before?
c. Has anything changed on the workstations or network?
2. What is the error?
a. If the connection timed out, has the workstation ever connected?
b. If DBK failure, has anyone recently logged out of the system?
Reports not working
To troubleshoot reports not working, have the customer select the reporting tool in use:
Analyst - GUI based reporting
PC Analysis - UNIX Based Reporting
Analyst - GUI based reporting
If the Analyst reporting tool is in use, have the customer answer these questions:
1. What version of Analyst are you using?
2. What version of Crystal Reports are you using?
3. What version of Excel are you using?
4. What report is not working?
a. Is it a standard report? (canned report)
b. Is it a custom report? (the customer modified a canned report)
5. Did you use auto conversion or manual conversion? If auto conversion, go to the next
step. If not, go to step 7.
6. Did your auto conversion work?
Maintenance and Troubleshooting Guide
March 2008
123
a. Is there another workstation that did convert records?
b. What time was it set for?
c. Do you have a screen saver, or low power standby on the monitor?
7. Did you run a manual conversion? If yes, then answer a,b,c. If no, go to step 8.
a. Did the screen turn yellow?
b. What error did they get? (At the bottom of the screen)
c. Has the PC been moved?
8. Has the IP address been changed?
9. When was the last time it worked?
PC Analysis - UNIX Based Reporting
If the PC Analysis reporting tool is in use, have the customer answer these questions:
1. a. Is this a new or existing extract?
2. b. What type of extract is it?
a. J - Job History
b. A - Agent History
c. I - Calling Info Statistics
d. T - Calling Trans Statistics
e. L - Calling List
3. What fields are you trying to extract information from?
4. What results are you getting?
5. Are you getting an error?
Call completion codes such as line Idle, busy, or hung up
in queue, appears excessively
To help troubleshoot the issue, have the customer answer these questions:
1. What completion code?
2. Is it on all jobs?
3. When did the issue first start?
124
Maintenance and Troubleshooting Guide
March 2008
Internet Monitor issues
To help troubleshoot the issue, have the customer answer these questions:
1. Is the web server working?
2. Have you reset the web server workstation?
3. How do you know Internet Monitor is not working? Do you see errors? Is it not updating?
4. Are there any network issues?
5. Have there been any recent changes in the network topology?
6. Have there been any recent changes to the web server?
Changes affecting performance
To help troubleshoot the issue, have the customer answer these questions concerning changes
made to the system:
1. Where were changes made?
●
Message Text
●
Message Assignment
●
Agent key files
●
Calling list
●
Upload/Download list
●
Dialer event Scheduler
●
Completion Codes
●
Message Mapping
Message Text
To help troubleshoot the issue, have the customer answer these questions:
1. What was the message "Number"?
2. What was the message "File Name (AU)" (Be case sensitive)?
3. What was the message "Type"?. What is the "Music or Voice" setting?
Maintenance and Troubleshooting Guide
March 2008
125
Message Assignment
To help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the script you created? It is case sensitive.
a. Is the name longer than seven characters?
2. What is the type of script you created?
a. Automated
b. Outbound
c. Inbound
d. Transfer
e. Virtual
Agent key files
To help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the keys file?
Calling list
To help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the list?
2. What tab did you make changes to? Tabs listed below:
●
Features
●
Fields
●
Prepare
●
Update
●
Custom
●
Message Map
●
Ordering
3. What change did you make?
126
Maintenance and Troubleshooting Guide
March 2008
Upload/Download list
To help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the list?
2. Did you add or delete fields? If so which fields were affected?
3. What type, Text, Number, Date, etc., of field was it?
4. What was the length of the field?
5. Did the field have any special formatting? If so which kind?
6. Did you refresh the calling list after making changes to the Upload/download?
7. Did you update the Structures and Method tabs?
Dialer event Scheduler
To help troubleshoot the issue, have the customer answer this question:
1. What changes did you make?
Completion Codes
To help troubleshoot the issue, have the customer answer this question:
1. What changes did you make?
Message Mapping
To help troubleshoot the issue, have the customer answer this question:
1. What changes did you make?
Back ups
To help troubleshoot the issue, have the customer answer this question:
What kind of Back up?
a. An Avaya Proactive Contact system back up?
Maintenance and Troubleshooting Guide
March 2008
127
b. A calling list back up?
c. A CDW backup?
Data pops (slow or none)
To help troubleshoot the issue, have the customer answer these questions:
1. Can you send e-mail both internally and externally?
2. Are you having any known network issues?
3. Has your company been expanding the network?
Predictive Blend not acquiring
To help troubleshoot the issue, have the customer answer these questions:
1. What is the job name?
2. Can the agents log into the job?
3. How long have the agents been sitting idle?
4. What type of switch do you have?
128
Maintenance and Troubleshooting Guide
March 2008
Detailed troubleshooting questions
This section covers scenarios with these areas of Avaya Proactive Contact troubleshooting:
●
Networking Issues:
●
Hardware troubleshooting
●
Telephony & Switch Troubleshooting
●
Software Issues
For other detailed troubleshooting help, see Avaya Proactive Contact Troubleshooting.
Networking Issues:
Question
Result
Can you ping the CPU from
the agent station?
No. There is no response from the CPU.
Can you ping an agent
station from the CPU?
No. There is no response from the agent workstation.
Can you ping the switch
from the CPU?
No. There is no response from the switch.
Run lanscan. Can you see
the network interface?
No, cannot see the network interface of the CPU.
Can you ping the
customer's default gateway
from the CPU? (Defined as
"route1" in the dialer hosts
table)
IP Address does not connect.
Confirm network
connectivity between the
CPU and switch, check
processes and look for 4
swif_mako processes
running.
Determine that the swif_mako process is not running.
For CTI systems, check
processes and look for one
swif_dg process running.
Determine that the swif_dg process is not running.
Maintenance and Troubleshooting Guide
March 2008
129
Run landiag. Do you see
any errors?
There are errors in the network connection package level.
Ask the customer's network
administrator for help in
determining if there are
other network connectivity
problems at the site.
Hardware troubleshooting
General hardware issues
130
Question
Result
Do any of the telephony
cards have alarm lights on?
Red alarm lights are on.
On the front of the CPU is a
small LCD panel. In the
lower right of this panel is a
small heart that alternates
between an outline and a
solid black heart. This
heartbeat indicates that the
HP operating system is
functioning without any
major errors.
When the heartbeat indicator is present, look elsewhere for a
system fault.
Hard drive failure, the
system does not boot. In
boot administration, search
for boot devices using the
SEA command.
If no devices are found, the hard drive has most probably
failed.
Are there any errors on the
switch for telephony cards?
The switch error log has errors for telephony cards.
Does the Uninterruptible
Power Supply have any red
lights displayed?
Battery failure.
Maintenance and Troubleshooting Guide
March 2008
Avaya CPU Issues
Question
Result
On the front of the CPU is a
small LCD panel. In the
lower right of this panel is a
small heart, which
alternates between an
outline and a solid black
heart. This heartbeat
indicates that the HP
operating system is
functioning without any
major errors.
When the heartbeat indicator is present, look elsewhere for a
system fault.
Can the customer connect
through the console port
rather than through the
network.
The CPU does not boot up/cannot log into the console.
Is it possible to get into the
CPU in Single-user mode
and not in multi-user
(normal) mode?
No. This indicates an operating system configuration problem.
Digital Switch Issues
Question
Result
Are there any alarms on the
Digital Switch subrack?
Yes. Review the troubleshooting information for the card
causing the alarms and determine whether the card needs
replacing.
Is there a diskette in the
floppy drive?
Yes. The system will attempt to reboot from the floppy.
Can you log into the digital
switch?
No, a message displays indicating that the connection was
refused.
Can you view the switch
menus on the console?
No. An error message displays indicating it could not connect.
Run ps -ef | grep swif_dg to
verify if the digital switch is
running properly.
If four instances of the swif_dg are not present, the switch is
not properly connected to the CPU.
Maintenance and Troubleshooting Guide
March 2008
131
Telephony Issues
Question
Result
Look in the digital switch
diagnostic menu to verify if
the card alarm status is
activated.
One of the cards in the digital switch subrack has an alarm
light on it.
Are the T1/E1 spans down
or out of sync?
Yes. This indicates problems with connectivity to the central
office or PBX. Reseat problem T1/E1's. This can be done
without restarting the switch. Follow the troubleshooting steps
outlined for the cards in the switch subrack.
Are there excessive T1/E1
slips?
Yes. This indicates timing problems. Reseat problem T1/E1's.
This can be done with the card cage and DSC running.
Where in the span is the
switch timing coming from?
Which span provides the
switch timing? This
information is found in the
digital switch control menu.
Use the master timing selection from the Card Maintenance
menu to verify the switch timing. Change the timing to another
card, if available.
Is the switch software up but
all the cards are in an alarm
state?
Yes. Shut down digital switch console and card cage first and
then power down and reseat the ENBC card.
Note:
Note:
You must shut down the digital switch (and
Avaya PDS) before doing this!
Telephony & Switch Troubleshooting
132
Problem
Probable Cause
Corrective Action
Agent has data but no
audio.
The agent entered a valid
keycode that belongs to
another agent's headset
when logging into the
Avaya Proactive Contact.
This only applies to
network- attached
headsets.
Have agent log out, then
log in again. Verify the
agent's headset ID by
looking at the opmon.cfg,
dgswitch.cfg, and hidfile
files.
Maintenance and Troubleshooting Guide
March 2008
Messages not playing in
hold queue.
Maintenance and Troubleshooting Guide
Messages are not installed
on the digital switch
controller.
Verify messages are
installed by using the Disk
Utilities menu to list the C:/
directory on the digital
switch controller. If
necessary, reinstall the
messages.
Failure of NFS mount after
nightly reboot.
Log into the switch and
remount NFS. Then rerun
msg_loader, and test.
LPVC card is poorly
seated or defective.
Check status of LPVC from
Card Maintenance screen
on switch. If the card is not
in Status A (active) reseat
it. If this fails, replace card.
Digital switch SCSI cable
is poorly seated or
defective
Inspect and re-seat the
cable.
Customer selected wrong
start script label for job.
Check the RUNCALL
parameter to find the start
script label being used for
the job. Then check
telephny.spt to find the
functionality of the start
script label. Verify with the
customer that the
functionality is what they
expected.
Changes in Supervisor.
Discuss changes with
customer, investigate
possible problems.
Wrong message name in
voicemsg.cfg on Avaya
Proactive Contact CPU.
Example:
fwait1 when message file
is named f_wait1
Verify that the message
filenames in job
parameters match those in
the voicemsg.cfg.
An agent entered the
wrong telephone extension
at the Enter Key Code
prompt. Affects one
workstation only.
Have the agent log out,
then log in again. Verify the
agent enters the telephone
extension correctly. Verify
the number is valid by
looking at the opmon.cfg
file.
March 2008
133
Workstation(s) with
dial-back headsets display
DIALBACK ATTEMPT
FAILED.
Change to or failure of
customer's telephone
network. For example, the
customer reprograms the
ACD in the network. A T1/
E1 span in the customer's
telephone network is
down. These causes affect
multiple workstations.
Try to re-establish the
connection by resetting the
trunk port interface card.
Try to re-establish the
connection by resetting the
digital switch. Ask the
customer to test and fix the
suspect trunk.
Other.
Isolate the problem by
looking for error messages
in the log files on the
Avaya Proactive Contact
CPU and digital switch. For
example, digital switch
system log file messages
might indicate an interface
port card for headsets is
out of service, indicating
the card needs resetting,
re-seating, or replacing.
A T1/E1 card has lost
synchronization with the
incoming data stream This
condition is typically due to
the customer losing
service from the Central
Office or PBX, or due to
the customer changing
class of service at the
Central Office or PBX.
Confirm diagnosis by
looking at the sync source
in the Master Timing Link
Selection screen. T1/E1
cards default to internal
sync if incoming sync is
lost. Re-establish incoming
sync from the Master
Timing Link Selection
screen. If the T1/E1 card is
out of service, which is
typical, reset the card by
re-seating it or by
changing its status, or
reset the digital switch. If
the T1/E1 span is down,
ask the customer to fix it.
Note:
Note:
The loss of carrier typically
forces the T1/E1 card out
of service. Requiring that
you reset it to re- establish
T1/E1 communication.
A T1/E1 card is poorly
seated or defective. This is
rare.
134
Maintenance and Troubleshooting Guide
Look for alarms in System
Alarm or Card Alarm
screens The alarm my be
T1/E1 remote out of frame
or T1/PRI, E1/PRI card
failure. Re-seat or replace
the card.
March 2008
Ground-start T1/E1
trunk(s) connected to a
Central Office that is
having channel bank
problems. Will see issue
with individual lines, not
the whole T1/E1 span.
Have customer call their
CO representative to verify
the problem and request
assistance.
PBX or Central Office has
taken out a telephone
trunk by failing to hang up,
usually due to a signaling
error. Service from the
Central Office or PBX has
been lost for some other
reason. The customer has
changed telephone wiring.
The trunk ports are
incorrectly configured in
the digital switch menu
system.
Verify which ports are
affected by looking at
portcorr phone line report
or Job Monitor Port
Display. Look at the Port
Display screen in the
digital switch menu
system. If a port is stuck in
the CP_DISC state, clear
the trunk by resetting the
port from the Card
Maintenance screen or by
re- seating the
corresponding port
interface card. Test the
trunk with the breakout box
or the Driver program. If
the trunk is bad, ask the
customer to fix it.
A T1/E1 card has lost the
incoming data stream.
Typically a T1/E1 span is
down.
Verify the diagnosis by
looking for "Remote
Carrier" or "T1/E1 Carrier"
alarm messages in the
digital switch log file or by
looking at the Card
Maintenance screen. T1/
E1 cards that have lost
carrier switch to
Maintenance status. Ask
the customer to test and fix
the T1/E1 span.
NO DIAL TONE appears
on Phone Line Usage or
Line Usage screen for one
or two trunks (typical). A
value of 5% or less for this
is normal.
The PBX or Central Office
failed to hang up due to a
signaling error.
You can sometimes fix the
problem by resetting the
port. Or, ask the customer
to reset the trunk at the
PBX or Central Office.
NO DIAL TONE appears
on Phone Line Usage or
Line Usage screen for a
large number of trunks to
T1/E1 cards.
The ear or mouth gain for
the headset has been set
to 0 This only occurs on
4-wire OLIC connections.
Check the ear and mouth
gain for the headset port
on the digital switch.
NO DIAL TONE appears
on Phone Line Usage or
Line Usage screen for
some or all T1/E1 trunks;
excessive (>100) outof-frame errors seen in the
Card Display screen.
Maintenance and Troubleshooting Guide
March 2008
135
136
The headset is bad.
Swap with a known-good
headset.
A trunk is stuck at Line
Available on the Phone
Line Usage screen or Line
Usage screen.
Voice cable or OLIC card
is bad.
While headsets are not in
use, disconnect cables
from OLIC. Reset the
OLIC card. If alarms clear,
then the problem is in the
cabling. If you still have
failed OLIC ports with no
cables attached, then the
replace the OLIC card.
Also, try swapping OLIC
cables. If the problem
follows the cable, then the
issue is wiring. If the
problem stays with the
OLIC port, then replace
the OLIC card.
A direct-connect headset
is dead.
Wrong headset type is
configured on OLIC card
Headsets which plug into
an adapter box (2-wire
headset to 4-wire
connection), sometimes
called an M10 box, should
be configured as
"CARBON" on OLIC card.
Headsets without this
adapter are configured as
"ELECTRET"
Avaya Proactive Contact
CPU was not rebooted
after the digital switch was
reset.
Reboot the Avaya
Proactive Contact CPU.
Ziptone messages are not
download to LVPC.
Verify status of LPVC is
"A" for Active on switch.
Verify NFS is "mounted."
Ask if all agents have this
problem, or if it is
intermittent. If intermittent,
test the LPVC.
A direct-connect headset
has poor sound quality.
Network issues.
Run landiag to check for
network issues, verify
transceiver is functioning.
Agents don't hear
ziptones.
LPVC card is poorly
seated or failing.
Check the status of LPVC
from Card Maintenance
screen on switch. If card is
not in status A (active),
reseat. If this fails, replace
the card.
Maintenance and Troubleshooting Guide
March 2008
Software Issues
General software issues
Question
Result
What feature(s) aren't
working?
This question helps narrow down the issue.
If the Agent API is in use,
can an agent successfully
telnet to the dialer and
receive?
If the agent can telnet to the dialer this indicates problems with
the API specifically and rules out job operation issues.
Are all Avaya Proactive
Contact processes running?
Run check_pds.
Look for errors in the log files (check_errors).
Mid-Tier Services Issues
Is Supervisor software
working?
No. This would indicate a Mid-Tier services failure.
Are the Mid-Tier processes
running? Run check_mts.
The Mid-Tier process is down. Run a stop_mts and a start_mts
to reset the Mid-Tier services.
Run check_errors and look
for issues with the Mid-Tier.
Results in a list of errors collected by the log files on a given
day between specified hours.
Maintenance and Troubleshooting Guide
March 2008
137
Supervisor
Question
Result
Is Supervisor software
working?
No. This could indicate a Mid-Tier services failure.
Run a check_mts to find out
if the Mid-Tier services are
running.
Not running, run a stop_mts and a start_mts to reset the
Mid-Tier services.
Was Supervisor software
installed properly? (The
Mid-Tier systems must be
installed prior to installing
Supervisor.)
No. Must reinstall the software in the proper order.
Is Supervisor configured
correctly through the
Configurator Tool?
Configurator lists the correct network information for the Avaya
Proactive Contact components.
Is the dialer's IP address
resolvable on the network
(hosts file or in DNS)?
No. Correct the IP address in the associated file.
Can you ping from the
Supervisor workstation to
the dialer or ping the
workstation from the dialer?
No. This is a network issue.
Database Services
138
Symptom
Remedy
Verify that the dialer and
Mid-Tier processes are
running, including HDSC
and HDCC.
●
Verify that the database is
running.
check_db (dialer)
To verify that the HDCC is
running and writing data to
the database
check_mts (Mid-Tier server)
●
check_pds (dialer)
check_mts (Mid-Tier server)
Maintenance and Troubleshooting Guide
March 2008
Verify that there is historical
data available on the target
dialer.
List the contents of the /opt/avaya/pds/lists/history/datastore.
● Ensure there is a directory corresponding to the current
date.
● List the contents of the directory corresponding to the
current date.
● Verify there is an event_store.data file in this directory and
ensure that it is the current date.
● Verify the data manager process is running (do a
check_pds).
● Execute the dataclient test program to verify that the
event_store.data file contains valid data by typing at the
command prompt:
dataclient -d mmddyyyy
A job is running and agents
are logged in on one or
more dialers but a report
executed from Analyst
shows no data for that job.
●
●
●
●
A job is running and agents
are logged in to one or more
dialers but the historical
data tables are not being
populated with data for a
specific job.
●
●
●
●
●
●
The HDCC is not running, or
fails to stay up after being
restarted.
●
●
●
●
●
Historical data is
incomplete.
●
●
Maintenance and Troubleshooting Guide
Verify that the database is running.
Verify that the HDCC is running and writing data to the
database.
Check to see if data for this job is being populated into the
tables.
If the tables are populated, then consult the
troubleshooting guide for Analyst.
Verify that the database is running.
Verify that the HDCC is running and writing data to the
database.
Check the Mid-Tier log for HDCC error messages.
Verify that the HDSC is running.
Verify that there is historical data available on the dialer.
Verify that there is only one HDCC process running on the
Mid-Tier server.
Verify that the Logger and Service Monitor are running.
Verify that the database is running.
Check the Mid-Tier log for HDCC error messages
Verify that the HDSC is running. Run a check_mts and
ensure that the HDSC is visible in the naming service.
Stop the HDCC and execute it from the command line.
Observe the output.
Ensure that the job has completed before running report.
Check the mid tier log for HDCC error messages.
March 2008
139
140
Maintenance and Troubleshooting Guide
March 2008
Avaya Proactive Contact Troubleshooting
Troubleshooting strategies for these areas of functionality are covered here:
●
Verify software is running
●
CORBA services
●
CCS
●
DCCS
●
Jobs
●
CTI
●
StatsPump
●
Mid-Tier Database
●
Mid-Tier Data Services
●
Dialer Mid-Tier connectivity
●
Historical Data Server Component
●
Database
●
End user applications
Verify software is running
To verify that the Avaya Proactive Contact is running correctly:
1. Identify errors by checking the log files:
tail -f /opt/avaya/pds/account/mid_tier_log.<ccyymmdd>
tail -f /opt/avaya/pds/account/account.<ccyymmdd>
2. Verify proper functionality of MTS by running check_mts. The system displays the
following message:
>>> All processes running!
3. Verify system proper functionality by running check_pds. The system displays the
following message:
>>> All processes running!
Maintenance and Troubleshooting Guide
March 2008
141
4. Verify proper functionality of database by running check_db. The system displays the
following message:
>>> All processes running!
CORBA services
There are two common errors with CORBA services:
●
The nsls script fails to list names in Naming_Service.
●
Some services fail to start.
nsls script fails to list names in Naming_Service
Try the following to correct the problem:
1. Check that the NAMESERVICEHOST keyword in $VOICEDIR/etc/master.cfg is set to
the correct value.
2. If the NAMESERVICEHOST keyword value is incorrect, replace the value with the correct
value and rerun nsls. If the nsls script still fails to list names in Naming_Service, go to the
next step.
3. Go to Mid-Tier dialer and run check_mts to make sure all the mts services are running. If
the check_mts script does not display All processes are running!, the script lists
any processes that are not running.
4. Start any process the check_mts script reports is missing following the instructions for
starting that process in Avaya Procative Contact Software Reference.
Some services fail to start
Try the following to correct the problem:
1. Some services such as serviceAct and serviceMonitor require logger to be running. Make
sure both logger and serviceMonitor, also a requirement for some services, are both
running using Health Manager, Middle-Tier Services > All.
2. If either logger of serviceMonitor is not running, right click in the Middle-Tier Services:All
window and click Stop All Midtier Services.
3. Right click in the Middle-Tier Services:All window and click Start All Midtier Services.
142
Maintenance and Troubleshooting Guide
March 2008
Sales Verification testing
Follow these steps to set up the Sales Verification feature test:
1. Install the Sales Verification feature.
2. Edit the list#.prep file to include this line:
EXECPROG:callconn:5 list1 verify1 verify1
which uses this syntax for callconn:
callconn <interval> list<num> <select name> <job name>
Follow these steps to test the Sales Verification feature:
1. Enter hostpds list1 at the command prompt.
2. To run callsel for an outbound job, enter callsel at the command prompt.
CCS
Command and control service (CCS) is Mid-Tier server deployed on the primary dialer system
which in collaboration with DCCS provides a unified multi-dialer command and control ability.
CSS maintains one DCCS connection for each dialer.
CCS not running
If CCS is not running, follow these steps to correct the problem:
1. Enter ps -e at the command prompt to verify that Naming_Service, Logger and
ServiceMonitor are all running.
2. If any of these processes is not running, following the instructions for starting that process
in Avaya Procative Contact Software Reference.
3. If CCS is still not running, the wrong Naming_Service may be in use by this set of Mid-Tier
services. Run nsls multiple times and make sure the results are identical.
4. If the results are not identical, more than one Naming_Service has been started on the
same multicast port. Make sure each system uses it own unique NameServicePort.
5. Run mtsconfigure and start_mts following the instructions for starting these scripts in
Avaya Procative Contact Software Reference.
Maintenance and Troubleshooting Guide
March 2008
143
CCS not passing requests to DCCS server
If CSS is not passing requests to the DCCS server, examine the $VOICEDIR/account/
mid_tier_log.ccyymmdd file to see if it contains any errors concerning DCCS.
DCCS
The Dialer Command and Control (DCCS) may have issues that result in processing errors,
CORBA problems, or crashes. This section covers those issues and more general DCCS
troubleshooting techniques.
DCCS processing errors
Processing errors for DCCS are logged in the general account log file, $VOICEDIR/account/
account.<ccyymmdd>. The prefix DCCS identifies DCCS entries in the log. All error
messages must be looked at in context and so a DCCS error message does not necessarily
imply a problem with DCCS.
DCCS and Corba problems
Although DCCS does not trace CORBA level calls, the $VOICEDIR/account/
mid_tier_log.<ccyymmdd> file can provide clues about DCCS CORBA level operations.
The CCS component produces this file and logs in detail each CORBA level interface call. Since
the CCS CORBA interface maps practically one-to-one with the DCCS CORBA interface, the
log file enables you to determine operations that were executed at or around the time of a
DCCS error such as a crash.
DCCS crashes
The $TAO_DATA/dccs_log file captures the STDOUT and STDERR. This log file
accumulates reports from multiple DCCS runs as each run’s data is appended to the end of the
file. The contents of this file are cleared daily by one of the maintenance scripts.
The dccs_log file is usually the very first indicator of a DCCS crash. All kinds of crashes report
at least a brief message to STDERR so this file can give a clue as to what was the reason for a
crash. The STDERR messages include the SIGTERM (signal #15) which is normally used to
stop DCCS, so that entry can be ignored.
144
Maintenance and Troubleshooting Guide
March 2008
Note:
Note:
Consequently, by counting the number of these messages, Entering Sig
Handler: 15, using a command like this on a HP-UX cmd-prompt:
$ grep 'Entering Sig Handler: 15' $TAO_DATA/dccs_logfile | wc -l
You should always get the numbers of DCCS terminations that day.
DCCS general troubleshooting
A trace file and unit testing can be great aids in troubleshooting DCCS problems.
Isolating DCCS problems
To determine if a problem is with DCCS or a connection issue, run DCCS with the -s, simulation
option, on the command line. In this mode, any call to the DCCS returns "junk" data. This test
verifies that a connection to the server is established without exercising the server's actual data
retrieval functionality. If the server does not return any data, the problem is probably a
connection issue and is not related to CORBA and its services.
DCCS trace file
The standard DCCS binary supports the creation of a trace file by running the binary with a -d
option. Running the binary with the -d option creates a detailed debug trace file, /tmp/
dccserverf.dbg.
DCCS unit testing
The dcctest tool, fully documented in the Avaya Proactive Contact Software Reference Binaries,
may help isolate problems. The tool uses an XML input file and generates output to the screen
and to an XML file.
The directory /opt/avaya/pds/tools/xml contains a Readme file, the dcclient.dtd file
needed by dcctest, and sample xml files used by dcctest. The xml files are in sub directories.
The names of the directories correspond to the "tables" in dccserver.
You can also use the md_callsel binary to help solve problems involving DCCS and the way it
does remote Selection Index processing. md_callsel is a simple cmd-line tool that can exercise
the request for a remote processing the same way the DCCS does it.
Use this syntax for md_callsel on the command line:
md_callsel <hostname-list_name #1> <selection_name #1>
[<hostname-list_name #2> <selection_name #2>] ... [options_string]
Maintenance and Troubleshooting Guide
March 2008
145
Using this tool helps narrow down the scope of the problem. If the command line above returns
the expected results it means that the problem must be with DCCS itself and/or any of the
DCCS clients (CCS or CCBridge or the front-end clients). If the command line above fails, the
problem is somewhere in the libdsi.a library, specifically the claccesss.c and
clcallsel.c and the listserver on the remote machine.
Jobs
This section describes several job troubleshooting processes. They include:
●
Using Test Mode
●
Job will not start
●
Jobs ends just after start
●
Invalid headset ID
●
Agent profile will not execute
●
Selection list Unavailable for use
●
Job in test mode ignores keystrokes
Using Test Mode
Several job troubleshooting scenarios require you to put the system in test mode. This section
describes how to set up test mode.
Set up call processing in test mode
To set up call processing in test mode, make the following changes to the system configuration:
1. In the /opt/avaya/pds/etc/master.cfg file, set the SWITCHTESTMODE parameter to
YES.
2. In the /opt/avaya/pds/config/opmon.cfg file, set the DEDHEAD parameter to
DEDHEAD:1-48,1 to define the dedicated agent headset ID number range used for testing
purposes.
3. In the /opt/avaya/pds/job/outbnd.job file, set the TESTMODE parameter to:
TESTMODE:VOICE=40 BUSY=20 NOANSWER=20 AUTOVOICE=20:
This setting defines the completion code distribution in the test call processing mode.
146
Maintenance and Troubleshooting Guide
March 2008
Set up calling list processing
To prepare the default list1 calling list for use:
1. Type createlist -A <Calling list application name>. The system displays a message like
this:
Put Data Onto System
Number of records processed - 501
This generates the /opt/avaya/pds/xfer/clist/list1.
2. Type list_prep list1. The system displays a message like this:
CALLING LIST BEING PREPARED FOR CALLING
# RETAINING CALL COMPLETION STATUS
latelst - Failed to open file list1.old
mv: /opt/avaya/pds/xfer/clist/list1.old.late: cannot access: No such file or directory
E00515|latemrk - Failed to open file list1.late
ENTERING TIME ZONES
Setzones 501 records
426 records
75 records
0 records
0 records
REMOVING DUPLICATE RECORDS
processed from list list1
successfully processed
failed with bad phone numbers
failed time zone lookup
failed with status of 'deleted'
Reject - Found 0 duplicates and 0 special exceptions in calling list list1
HASHING THE CALLING LIST
clhash - Successful processing for list 'list1' field 'ACCTNUM' 501 records
HASHING THE CALLING LIST FOR DO NOT CALL
clhash - Successful processing for list 'list1' field 'ACCTNUM' 501 records
MARK RECORDS WITH DAYS ON PROACTIVE CONTACT GREATER THAN 5
OOPS
chkentdt - Processed 501 records on list: list1 with 0 records deleted
REJECTED ACCOUNTS
REJECTED ACCOUNTS
CALLING LIST PREPARED FOR CALLING - list1
Type chkentdt list1 ACCTNUM d=5 w=5. The system displays a message like this:
OOPS
chkentdt - Processed 501 records on list: list1 with 0 records deleted
Type callsel -l list1 -s all -x -p. The system displays a message like this:
CALL SELECTION
Maintenance and Troubleshooting Guide
March 2008
147
Selection List Generation
Records processed
398
501
Total records
records selected and
0
501
recalls
Writing Selection List Index #1
Generating Report File 11876
Job will not start
Check the job guard times, STARTTIME and STOPTIME, in the .job file and adjust the values as
necessary to fix this problem.
Jobs ends just after start
If when you start a job, its ends abruptly after a few seconds, check the following to troubleshoot
this issue:
1. Are timezone codes for each phone number classified in the calling list? If not, correct the
timezone codes for phone numbers and restart the job.
2. Check to see that there are uncalled records in the calling list. If there are no uncalled
records, either obtain a fresh list or reset list to an uncalled state. Enter this command at
the command prompt to reset the list:
set_field list1 STATUSFLAG CODE DTE TME.
3. Check the timezone report in config_ed to see if you are attempting to call within the
timezone guard times of at least some of the records in your list.
Note:
148
Note:
If you need to modify timezone.cfg, you must re-run your callsel for the new
times to take effect.
Maintenance and Troubleshooting Guide
March 2008
Invalid headset ID
In test mode, you try to log on an Agent and get the error message, Invalid headset ID.
Try the following to correct the problem:
1. It may be that the system is not in testmode. Check that the SWITCHTESTMODE keyword in
$VOICEDIR/etc/master.cfg is to YES.
2. If the error persists, check that these keywords in $VOICEDIR/config/opmon.cfg
have the listed values:
●
CFGTIME:15
●
DEDHEAD:1-48,1
●
#DIALBACK:49-96:15:0::
●
#DIALBACKNUM:ALL
●
DIALINTIMEOUT:30
3. If the values in opmon.cfg are correct and the error still occurs, check that PORTS
keyword value in $VOICEDIR/etc/master.cfg matches the DEDEAD keyword value in
$VOICEDIR/config/opmon.cfg. If they do not match, make them have the same
value.
4. If the error is still there, check that the number of headsets in $VOICEDIR/config/
dgswitch.cfg matches the value for the keyword, PORTS in $VOICEDIR/etc/
master.cfg.
5. If you made any changes to parameters, reboot Avaya Proactive Contact.
Agent profile will not execute
If when agents log in, their .profile will not execute:
1. Make sure that the agent's .profile is soft-linked to /etc/skel/pds_agent/.profile. The /etc
directory must have correct ownership and permissions or the agent may not have
permission to run it.
2. If agents still have problems with their .profiles, try logging in as root and running
$VOICEDIR/tools/shell/sysverify. This tool checks to see whether all dialer files,
ownerships and permissions are present and correct. sysverify -f corrects any
permission or ownership problems. Use the -f option only as a last resort.
Maintenance and Troubleshooting Guide
March 2008
149
Selection list Unavailable for use
When you try to start a job, you get the message Selection list unavailable for use.
There are two possible causes of this error:
1. Jobs may be trying to use the same .S file. Check that each currently running job is
accessing its own .S file.
2. If a job (or caller) aborted prematurely, it did not do its cleanup steps.
Note:
Only perform these steps as a last resort. These steps remove all current job files.
Note:
To do the clean up manually, first stop all jobs. Then, at the command prompt, enter:
●
cd $VOICEDIR/lists
●
rm *.inx *.rcl *.sel *.stgy *.stat *.as *.recsel stat.*
Rerun callsel before trying to start the job again.
Job in test mode ignores keystrokes
When running a job in test mode, the system ignores keystrokes to the agent CUI window. For
inbound and outbound agents in test mode, if you want to interact manually with the agent CUI,
set the <jobname>.job TESTOPER parameter to an empty string.
General Job troubleshooting
150
●
Check job parameters
●
Check list
Maintenance and Troubleshooting Guide
March 2008
Check job parameters
In the /opt/avaya/pds/job/<job_name>.job file you wish to run, check the following keywords:
Keyword
Value
Description
LIST:
hula:list1
Indicates the name of the calling list to use
for the job.
SELECT:
all
Indicates the record selection (*.S) file
name.
STARTTIME:
08.00:
Earliest start time for a job in 24-hour format
hh.mm. Set to 00.01 for night-owl/early-bird
testers.
STOPTIME:
23.00:
Latest stop time for a job in 24-hour format
hh.mm. Set to 23.59 for night-owl/early-bird
testers.
Indicates the distribution of call completion
code results required in test mode.
Percentages must equal 100.
TESTMODE:
TESTOPER:
VOICE
Set to 100 for manual calling. 40 is the
default value for test mode.
BUSY
20 is the default value for test mode.
NOANSWER
20 is the default value for test mode.
AUTOVOICE
20 is the default value for test mode.
<talktime=
sec>,
<updtime=sec
>
Leave blank for manual calling. Indicates the
number of seconds agents are allowed for
talk time <talktime> and update time
<updtime>. Set both values to 5 for test
mode.
Check list
To make sure the list you intend to use for testing exists, check the /opt/avaya/pds/xfer/
clist directory for it. If it is not present or if you just need a small sample list to test with, you
can generate one with the readtape command as follows:
1. On the same system as the clist directory, type:
readtape -c hg_in1 -d lt_in1 -o
list_prep list1
Maintenance and Troubleshooting Guide
March 2008
151
2. The first time the list is used run setzones, to classify the time zone of each phone number,
type:
setzones list1
3. Run callsel to set up an index with pointers to selected records:
callsel -l list1 -s all -x -p [-u]
where -x means skip manual configuration, use as is (if possible)
-p means print results to /tmp/reports
-u unit work lists active (for unit work list jobs)
-s defines the strategy file, /opt/avaya/pds/callsel/all.S
-l defines the calling list, /opt/avaya/pds/xfer/clist/list1
CTI
The topics of CTI troubleshooting covered are:
●
Installation: Verify CTI link
●
CTO OAM Utilities
●
CTI Troubleshooting
●
Troubleshooting tips for Avaya CTI
Installation: Verify CTI link
To verify the CTI link you need to check the state of Avaya CT or Application Enablement
Services (AES).
152
Maintenance and Troubleshooting Guide
March 2008
Avaya CT
Follow these steps to verify the CTI link:
1. Go to the server that is running Avaya CT 1.x and start the TS Controller by entering Start
> All Programs > Avaya Telephony Computer > TS Controller that displays this dialog
box:
The Telephony Services State text box should contain the word RUNNING which
verifies that Avaya CT is running.
Maintenance and Troubleshooting Guide
March 2008
153
2. To check that a call can be made through Avaya CT, go to the server that is running Avaya
CT 1.x and start TS Test by selecting Start > Al Programs > Avaya Telephony
Computer > TS Win32 Client > TS Test to display this dialog box:
3. In the TSTest Telephony Services Test Application dialog box fill in the Server, User,
and Password text boxes with dialer values found in the swif_ct.cfg and cti_passwd.cfg
files.
4. In the TSTest Telephony Services Test Application dialog box fill the From and To text
boxes with real extensions on the PBX.
5. Click Dial to run the test.
6. If the test is successful, the test displays a message box with this content:
Call successfully originated. Dismiss this message box to terminate call.
7. If the test is unsuccessful, verify that the extensions used for To and From are working by
placing a call from them using a hard phone. If either of these calls fail, there is a line
problem with the extension that failed.
8. If these calls are successful, then there is a problem with either the configuration of Avaya
CT Server, the CTI Link, or on the Avaya PBX.
9. To troubleshoot these errors, inspect the error logs on the server that is running Avaya CT
1.x by selecting Start > All Programs > Avaya Telephony Computer > Error Log.
154
Maintenance and Troubleshooting Guide
March 2008
AES
To verify that the AES process is running:
1. Log in to CTI OAM Admin to display the Operations, Administration and Maintenance
(OAM) home page.
2. From the main menu, select CTI OAM Admin to display the CTI OAM home page:
On this screen check that all the services have a Controller Status of Running.
Maintenance and Troubleshooting Guide
March 2008
155
3. To view the connection state, select Status and Control > Switch Conn Summary to
display this screen:
The entry for the Conn Stat column should be Talking.
156
Maintenance and Troubleshooting Guide
March 2008
CTO OAM Utilities
The CTI OAM home page also provides access to Utilities. To access the utilities, select
Utilities from the main menu to display this screen:
ASAI Test
Use the ASAI Test page to determine if the AE Server is communicating with Communication
Manager.
Ping Host
Use the Ping Host page to determine if the hostname or IP address you specify exists and is
accepting requests.
TSAPI Test
Use the TSAPI page to place a test phone call.
Maintenance and Troubleshooting Guide
March 2008
157
CTI Troubleshooting
This section includes a discussion of Testmode, Debugging logs and some general
troubleshooting techniques for Avaya CTI.
Testmode
Use testmode to test the CTI configuration, but not the switch. It is particularly useful for use
before the CTI Link and PBX are ready for test. Since testmode does not work with Avaya
Proactive Contact with CTI, you must change the configuration slightly to use testmode. Make
these changes:
File
Keyword
Value
master.cfg
SWITCHTESTMODE
YES
master.cfg
SWITCHTYPE
DIGITAL
opmon.cfg
DEDHEAD
1-48,1
Restart the dialer.
Debugging logs
There are three logs that can be used for solving problems with swif_ct and its functionality:
●
switch_log.ccyymmdd
●
cti.dbg
●
swif_ct.dbg
The switch_log.ccyymmdd is always available on a running dialer in the /opt/avaya/
pds/account directory. The contents of this file include such events as start, link down, link up
and errors.
The cti.dbg file is a log of all the messages flowing between swif_ct and the CTI Link. To
create this log file, set this environment variable in the /opt/avaya/pds/scripts/
pdscontrol file:
export CSTATRACE=/opt/avaya/pds/account/cti.dbg
Make sure the line above is close to the beginning of the file. The directory and file name can be
any valid directory and file name, although the account directory contains several other logs, so
it is an easily remembered choice. Since this file can grow quite large, use it only during a
debug session, not for normal use.
158
Maintenance and Troubleshooting Guide
March 2008
The swif_ct.dbg file cannot be created by the standard swif_ct binary, but requires a special
debug version of the binary to create it. If a debug version is available, make a copy of the
original swif_ct file and put in it in a safe place. Overwrite the original swif_ct with the debug
version. To have the debug version create the swif_ct.dbg file, add this line near the start of the
/opt/avaya/pds/scripts/pdscontrol file:
export SWIFDEBUG=1,10-31:timestamp
Restart the dialer. Every time swif_ct is restarted, the swif_ct.dbg file, located in the /tmp
directory is overwritten.
Troubleshooting tips for Avaya CTI
This section contains a small set of troubleshooting tips for Avaya CTI.
driver_ct
Use driver_ct, a CTI test tool, to send messages to swif_ct as if the messages were coming
from opmon or porter. The tool reports the messages back from swif_ct and is useful for
verifying functionality from swif_ct through the switch to the end station. See the Driver_ct User
Guide, CID 113850, for more information on driver_ct.
Managed job without CPA issues
There are four different scenarios that can cause problems with managed jobs:
1. If the system is using Make Predictive Call instead of Make Call, make this change:
●
Set the VISUAL_CPA keyword in master.cfg to NO.
●
Do not use with Agent, only with the Agent API such as PDS Agent.
2. If the system appears to be working because pop screens appear, but agents are not
making calls, the system may be in testmode. See Testmode for details on testmode.
3. Problem with "operator" can occur when an agent logs in, puts in extension and agent
type, and the error message Invalid headset displays. To correct this error:
●
Run check_pds to assure that the swif_ct process is running. If the swif_ct process is
not running, it can cause the error message.
●
If the swif_ct process is not running, check the switch_log to determine the reason it
is not running.
4. With PDS Agent, when the agent clicks OK on the login screen, the error message
Unable to open channel to agent monitor process displays.
●
This error message occurs when swif_ct is not running. Run check_pds to assure that
the swif_ct process is running.
Maintenance and Troubleshooting Guide
March 2008
159
●
If the swif_ct process is not running, check the switch_log to determine the reason it
is not running.
Predictive calls troubleshooting
Sometimes with predictive calls, an agent can generate pop screens, but has no audio call. This
often results in error messages in the switch log such as:
●
Unknow!2005/10/21!17.08.55!(type=0,severity=3,subsys=6) Swif_ct:
E48015: No Call for Route Request: RegReqID?=1, CrossRefID? = 283,
CallID?=709
●
Unknow!2005/10/21!17.09.55!(type=0,severity=3,subsys=6) Swif_ct:
E48027: Route End Error: RegReqID?=1, CrossRefID?=283, Error = 52
Resolves these errors by setting the Universal Call ID in the PBX to Yes.
StatsPump
Statspump consists of the statsPumpCtrl process and statspump java process.
Follow these steps to troubleshoot statspump:
1. Check that statspump is running by entering check_mts at the command prompt.
2. If statsPumpCtrl does not display in the results for check_mts, most likely statsPumpCtrl
has not started. Run check_mts again to make sure serviceMonitor and Naming_Service
are running.
3. If either these two processes are not running, follow the instructions for starting that
process in Avaya Procative Contact Software Reference.
4. Check that statspump is running by entering check_mts at the command prompt. If it is
still not running, go to the next step.
5. Reconfigure the system by following these steps:
a. Check the keyword values in $VOICEDIR/etc/master.cfg to ensure they are set
correctly. Edit the file to correct any mistakes.
b. Enter stop_pds and then stop_mts at the command prompt.
c. Delete all files in the /opt/avaya/services/data directory.
d. Enter start_mts and then start_pds at the command prompt.
e. Enter check_mts at the command prompt and inspect the results to ensure that
statsPumpCtrl is running.
160
Maintenance and Troubleshooting Guide
March 2008
Mid-Tier Database
Two common problems with the Mid-Tier database are networking issues that prevent access to
the database and in some cases the database process is not running. The next two sections
provide guidance on resolving these issues.
Mid-Tier database network problems
If you suspect the Mid-Tier database is not available on the network, follow these steps to
troubleshoot the problem:
1. From the command prompt, ping the host system for the database using the IP address of
the host system.
2. If the ping is successful, go to Mid-Tier database not running.
3. If the ping is unsuccessful, check that the /etc/resolv.conf file contains the line:
domain <domain name>
4. If /etc/resolv.conf does not contain the line above, add the line to the file.
5. From the command prompt, ping the host system for the database using the IP address of
the host system. If the ping is unsuccessful, there are two possible next steps depending
on whether or not DNS is in use.
6. If DNS is in use, edit the /etc/nsswitch.conf to contain this line:
<IP_address><machine_name><machine_name.domain>
7. If DNS is not in use, edit the /etc/hosts to contain this line:
<IP_address><machine_name><machine_name.domain>
8. From the command prompt, ping the host system for the database using the IP address of
the host system.
Mid-Tier database not running
To see if the Mid-Tier database is running, enter this command at the command prompt on the
database host system:
check_db
If the Mid-Tier database is not running, start it by entering these command at the command
prompt on the database host system:
stop_mts
Maintenance and Troubleshooting Guide
March 2008
161
start_db
start_mts
Verify Mid-Tier components can access database
To verify StatsPump updates data in the database and Mid-Tier components can access the
database, follow these steps:
1. Open Window Explorer on the client system.
2. Navigate to the Avaya Proactive Contact install directory.
3. In the ..\Services\3rdParty\Oracle10g directory, double-click sqlplus.exe.
4. At the Enter user-name prompt, type avayapdsdb/avayadba.
5. At the SQL> prompt, type select * from dialerdef; and press ENTER. Make sure you
have entered the semi-colon (;).
6. The screen should display something like this:
DIALER_ID DIALERNAME_NTXT
PACKETTIME_NUM DIALERIP_NTXT
---------- -------------------- -------------- -----------------------------SYSTIME_NTXT
SYSLINES_NUM SYSAGENTS_NUM SYSJOBS_NUM SYSUPDATETIME_NUM
-------------------- ------------ ------------- ----------- ----------------LASTUPDTIME_NUM
--------------23 redlab23
1144852359 143.243.248.123
2006/4/12 7:32:39
21
108
50
6
1144932555
There is one row of data for each dialer in the pod. Be sure to note the SYSTIME_NTXT
data, 2006/4/12 7:32:39 in the example. This time stamp should be current.
7. Enter the command again.
8. Each time you enter the command with about a 30 second pause, the systime_ntxt
value updates for dialers running Avaya Proactive Contact.
9. If it is not updating, there in a problem with connectivity, see Dialer Mid-Tier connectivity.
Mid-Tier Data Services
This MS Windows component, avmtdsci.dll, provides database connection between the
client applications and the primary dialer. At one end, it connects to a database to get data and
at the other; it offers several interfaces to the client. The data returned by MTDSC is computed
based on the information available in the database and the parameters provided by the client.
162
Maintenance and Troubleshooting Guide
March 2008
If errors occur inside MTDSC, messages register in Window's Event Viewer. Usually the errors
relate to the database connections, database operations and interface specifics.
To troubleshoot these issues, follow these steps:
1. To set the avmtdsci.dll in debug mode, change the Windows Registry entry for
HKEY_LOCAL_MACHINE/SOFTWARE/Avaya/Proactive Contact 4.0/
Supervisor/DscDebug to 1.
Avaya Proactive Contact creates an AvMTier directory at the Windows root that contains
the avmtdsciiL0.log and the dscHierL0.log files.
Note:
Note:
You can also turn on debugging by through the CD Log Viewer main menu, Tools
> Turn Data Services Debug Logging On.
2. To check the database connection, from the Windows Start menu, select Settings >
Control Panel > Administrative Tools > Data Sources (ODBC).
3. Click on the System DSN tab.
4. Select AvayaPDSDB from the list of System Data Sources.
5. Click Configure.
6. In the Oracle ODBC Driver Configuration window, click Test Connection.
7. You should see a Connection successful message. Otherwise you see an error
message which you should record.
Dialer Mid-Tier connectivity
If any client application has problems communicating with the Mid-Tier, follow these steps:
1. Type check_pds on the dialer and you should see the following message:
>>> All processes are running!
2. Open a Windows command prompt and enter the following command:
nslist -ORBSvcConf "C:\Program Files\Avaya\Proactive Contact 4.0\
Supervisor\Common\corba_svc.conf" -ORBInitRef
NameService=corbaloc:ssliop:<dialername>:23201/NameService
in which <sysname> is either the IP address or alias of the system on which the Mid-Tier
Naming Service resides.
3. From the Windows Start menu, select Settings > Control Panel > Administrative Tools
> Data Sources (ODBC).
4. Click on the System DSN tab.
5. Select AvayaPDSDB from the list of System Data Sources.
Maintenance and Troubleshooting Guide
March 2008
163
6. Click Configure....
7. In the Oracle ODBC Driver Configuration window, click Test Connection.
8. You should see a Connection successful message. Otherwise you see an error
message which you should record.
Historical Data Server Component
Historical data describes all activities that take place on one or more dialers over a specified
time interval. The datapump binary serves as the historical data component client (HDCC). The
historical data server component (HDSC) runs from the start_pds script and the pdsconfigure
script registers the HDSC into the Naming Service on the dialer.
HDCC troubleshooting
If the HDCC is not running:
1. Use check_mts to make sure the logger and serviceMonitor processes are running before
starting the datapump binary.
2. On the primary dialer, use check_db to make sure the database is running and available
to users. It should display this message:
>> > All processes are running and the database is opened to the
users!
The following sections detail some typical problems that occur with the HDSC and HDCC.
Analyst shows no data for running job
A job is running and agents are logged in on one or more dialers, but a report executed from
Analyst shows no data for that job.
To resolve this issue, follow these steps:
1. On the HDSC host system, use check_db to determine if the database is running. If the
database is running, go to the next step.
2. If the database is not running, you need to start it using the start_db script. Consult Avaya
Proactive Contact Software Reference Scripts for important information on using this
script.
3. On the HDCC host system, enter check_mts to check that datapump is running. If the
datapump is running, go to step 5.
164
Maintenance and Troubleshooting Guide
March 2008
4. If datapump is not running, you need to run the start_mts script. Consult Avaya Proactive
Contact Software Reference Scripts for important information on using this script.
5. Verify that HDCC is writing data to the database by:
a. At the command prompt on the client system, enter:
sqlplus
b. The database prompts you for a username and password. Log in as avayadba.
c. Enter this command at the sqlplus command prompt:
select * mo_job;
See if data for this job is being populated into the tables.
6. If data for this job is being populated into the tables, consult Analyst troubleshooting for
further help.
Historical data tables not being populated with data
A job is running and agents are logged in to one or more dialers but the historical data tables
are not being populated with data for a specific job.
To resolve this issue, follow these steps:
1. On the HDSC host system, use check_db to determine if the database is running. If the
database is running, go to step 3.
2. If the database is not running, you need to start it using the start_db script. Consult Avaya
Proactive Contact Software Reference Scripts for important information on using this
script.
3. On the HDCC host system, enter check_mts to check that datapump is running.
4. f the datapump is running, go to the next step. If datapump is not running, you need to run
the start_mts script. Consult Avaya Proactive Contact Software Reference Scripts for
important information on using this script.
5. Check the mid_tier_log.<ccyymmdd> with today’s date for error messages.
6. Verify that HDCC is writing data to the database by:
a. At the command prompt on the client system, enter:
sqlplus
b. The database prompts you for a username and password. Log in as avayadba.
c. Enter this command at the sqlplus command prompt:
select * mo_job;
See if data for this job is being populated into the tables.
7. If data for this job is being populated into the tables, use the UNIX ps command to make
sure there is only one HDCC process running on the Mid-Tier host system.
Maintenance and Troubleshooting Guide
March 2008
165
HDCC is not running
If the HDCC is not running, or fails to stay up after being restarted, follow these steps to resolve
the issue:
1. Make sure both logger and serviceMonitor are both running by typing check_mts at the
command prompt on the Mid-Tier host system.
2. If either logger of serviceMonitor is not running, use start_mts following the directions in
start_mts topic in Avaya Proactive Contact Software Reference Scripts to start either or
both binaries. If the problem persists, go to the next step.
3. On the HDSC host system, use check_db to determine if the database is running.
4. If the database is running, go to the next step. If the database is not running, you need to
start it using the start_db script. Consult Avaya Proactive Contact Software Reference
Scripts for important information on using this script.
5. Check the $VOICEDIR/account/mid_tier_log.ccyymmdd for today’s date for HDCC
error messages.
HDSC run problems
The HDSC is not running or fails to stay up after being restarted. To resolve this issue run HDSC
in debug mode and observe the output.
No historical data on the dialer
There is no historical data available on the dialer. Either the directory or file is missing, or the
Data Manager is not running. To solve this issues, use stop_pds to stop Avaya Proactive
Contact and start_pds following the directions in the stop_pds and start_pds topics in Avaya
Proactive Contact Software Reference Scripts.
Historical data is incomplete
When historical data is incomplete, follow these steps to resolve the issue:
1. Check to make sure the job has completed before running the report.
2. Check the $VOICEDIR/account/mid_tier_log.ccyymmdd for today’s date for HDCC
error messages.
166
Maintenance and Troubleshooting Guide
March 2008
Database
Oracle provides a mechanism, the online redo log, to recover from database errors. Each online
redo log has at least two redo log files that contain redo records, also called redo entries. Each
record is made up of a group of change vectors. Each vector is a description of a change made
to a single block in the database. For instance, changing a salary value in an employee table,
generates a redo record that describes changes to the:
●
data segment block for the table
●
rollback segment data block
●
transaction table of the rollback segments
Note:
The Oracle background process Log Writer (LGWR) creates the redo log files in
the redo log buffer of the System Global Area (SGA). Whenever a transaction is
committed, LGWR writes the transaction's redo records from the redo log buffer
of the SGA to an online redo log file, and a system change number (SCN) is
assigned to identify the redo records for each committed transaction.
Note:
The online redo log of a database consists of two or more online redo log files. Oracle requires
a minimum of two files to guarantee that one is always available for writing while the other is
being archived if the system is in ARCHIVELOG mode. LGWR writes to online redo log files in a
circular fashion such that when the current online redo log file fills, LGWR begins writing to the
next available online redo log file.
Redo records can also be written to an online redo log file before the corresponding transaction
is committed. If the redo log buffer fills, or another transaction commits, LGWR flushes all of the
redo log entries in the redo log buffer to an online redo log file, even though some redo records
may not be committed. If necessary, Oracle can roll back these changes.
Redo entries record data that you can use to reconstruct all changes made to the database,
including the rollback segments. Therefore, the online redo log also protects rollback data.
When you recover the database using redo data, Oracle reads the change vectors in the redo
records and applies the changes to the relevant blocks.
Filled online redo log files are available to LGWR for re-use depending on whether archiving is
enabled:
●
If archiving is disabled (NOARCHIVELOG mode), a filled online redo log file is available
once the changes recorded in it have been written to the data files.
●
If archiving is enabled (ARCHIVELOG mode), a filled online redo log file is available to
LGWR once the changes recorded in it have been written to the deadfalls and once the file
has been archived.
Maintenance and Troubleshooting Guide
March 2008
167
Note:
ARCHIVELOG mode is not the default. You have to set it up as part of the admin
job. You can find more details on this entire process in the ORACLE Admin
manual. There is a whole section about how you have to plan and configure your
system to do this type of logging for recoverability.
Note:
Recovering in the event of media failure
You can restore a database to the state it was in at the point of failure if the current transaction
log file for the database is available and undamaged.
To restore the database to the point of failure:
1. Back up the currently active transaction log. For more information, see Transaction Log
Backups in the Oracle documentation.
2. Restore the most recent database backup without recovering the database.
3. If differential backups exist, restore the most recent one.
4. Restore each transaction log backup created since the database or differential backup in
the same sequence in which they were created without recovering the database.
5. Apply the most recent log backup (created in Step 1), and recover the database.
!
Important:
Important:
To protect against loss of transactions under the Full Recovery model, the
transaction log must be protected against damage. It is strongly recommended
that fault-tolerant disk storage be used for the transaction log.
See also Administering SQL Server/Transaction Log Backups in the Oracle documentation.
168
●
You can set up your database so that you can fully recover data from a previous backup.
All the logging you did is relative to the previous backup, it is not a snapshot of the
database data taken at intervals of time.
●
To do 1., you have to set up your database to log activities from the moment you did the
backup to … the moment you do a next backup (for example) (this is the strategy that a
dba, has to choose, plan, and configure for his system backup and recovery)
●
This option is not the default or something that happens automatically because it is
resource consuming and you really have to go through some planning and know what you
are doing and be aware you are doing it.
●
This is an admin function, not a conceptual function of the database.
Maintenance and Troubleshooting Guide
March 2008
Common Oracle errors
If an error occurs when preforming the procedure in the first part of Dialer Mid-Tier connectivity,
make a note of the error number and the exact text of the error message. This contains the
solutions to a couple common Oracle error messages.
ORA-12154: TNS: could not resolve the connect identifier
To resolve this issue, follow these steps:
1. In the Avaya Proactive Contact install directory, verify that the ..\Services\3rdParty\
Oracle10g\tnsnames.ora file exists. When the user runs the Avaya Proactive Contact
Configurator in Health Manager it creates this file. If it does not exist, create it by running
the Avaya Proactive Contact Configurator again, then closing Health Manager. If the error
message reappears, go to the next step.
2. Verify that there is no other installation of Oracle on the machine. Although Avaya
Proactive Contact is designed to be self-contained and should coexist with other Oracle
installations, there are some possible points of conflict, particularly if the other Oracle is
older than version 10i. For example, if another Oracle installation uses a client profile
(SQLnet.ora), this file may prevent the tnsnames.ora file from being discovered.
ORA-12545: Connect failed because target host or object does not exist
To resolve this issue, follow these steps:
1. In the Avaya Proactive Contact install directory, verify that the ..\Services\3rdParty\
Oracle10g\tnsnames.ora file contains this line:
HOST = <dialername>
in which <dialername> is either the alias of the dialer or the dialer’s IP address.
2. If the tnsnames.ora file does not contain the line in step 1, add it to the file. If the error
message persists, go to the next step.
3. Open Window Explorer.
4. Navigate to the Avaya Proactive Contact install directory.
5. In the ..\Services\3rdParty\Oracle10g directory, double-click sqlplus.exe.
6. At the Enter user-name prompt, type avayapdsdb/avayadba.
7. At the SQL> prompt, type select * from dialerdef; and press ENTER. Make sure
you have entered the semi-colon (;).
8. The screen should display something like this:
DIALER_ID DIALERNAME_NTXT
PACKETTIME_NUM DIALERIP_NTXT
---------- -------------------- -------------- -----------------------------SYSTIME_NTXT
SYSLINES_NUM SYSAGENTS_NUM SYSJOBS_NUM SYSUPDATETIME_NUM
Maintenance and Troubleshooting Guide
March 2008
169
-------------------- ------------ ------------- ----------- ----------------LASTUPDTIME_NUM
--------------23 redlab23
1144852359 143.243.248.123
2006/4/12 7:32:39
21
108
50
6
1144932555
There is one row of data for each dialer in the pod. Be sure to note the SYSTIME_NTXT
data, 2006/4/12 7:32:39 in the example. This time stamp should be current. If it is not, data
is not being updated to the database.
End user applications
This section covers some general troubleshooting tools and a couple specific troubleshooting
scenarios.
Analyst
If there are connectivity issues, see Mid-Tier database network problems. If there are problems
with reports such as printing, previewing, or incorrect content, check that these files in the C:\
Windows\system32 directory have the listed value for attributes:
File name
Creation date
Time
Size
Version
crpe32.dl
l
Friday, February 09,
2001
10:43:51
458757
7
8.5.0.
217
crwrap32.
dll
Thursday, December 10,
1999
23:17:28
66560
7.0.0.
8
Implode.d
ll
Thursday, November 10,
2001
15:42:09
17920
18944
Crpaige80
.dll
Thursday, November 09,
2000
07:52:00
618496
8.0.1.
3
Use Windows Explore to navigate to the C:\Windows\system32 directory. Right click on each
file name and click Properties to see these attributes.
If the size and version match, the file is most likely the current version.
170
Maintenance and Troubleshooting Guide
March 2008
Editor
Most Supervisor Editor problems generate a message box with an error message. If such an
error occurs note all the details in the message box.
cd.log file
For errors that do not generate a message box, use LogView.exe to view the cd.log file.
Note:
Note:
If errors occur, select Tools > Increase Logging Level on the LogView main
menu bar to make sure the maximum number of messages are written to the log.
Follow these steps using LogView to troubleshoot the issue:
1. On the main menu select View > Show Code Errors and uncheck the other options.
2. Search the Date/Time column until you find one or more errors that match the same time
frame of the reported error.
3. If that isn't possible, make a backup of the cd.log file by copying it to another directory then
renaming the copy as cd.bak.
4. Delete the original cd.log file using the LogViewer tool then click Refresh.
5. Perform the same action that caused the reported problems and re-examine the log. If
there are no errors, uncheck the Show Code Errors option and check Show Transaction
Tracking.
6. Click Refresh.
7. Record any errors that occur.
mid_tier_log files
In systems with a dialer pod, the mid_tier_log.ccyymmdd daily log file is on the master dialer. in
such situations to determine the master dialer, check the Windows system’s registry entry for:
MyComputer\HKEY_LOCAL_MACHINE\SOFTWARE\AvayaInc\PDS\CommandControl
The entry value should look like this:
ORBInitRef"NameService=iioploc://<master_dialer>:23200/NameService
in which <master_dialer> is the name of the master dialer system.
Check the $VOICEDIR/account/mid_tier_log.ccyymmdd for today’s date for Supervisor Editor
error messages.
You can also use Health Manager to check the status of the system.
Maintenance and Troubleshooting Guide
March 2008
171
Monitor
Monitor, Hierarchy Manager and Analyst use the same dll. This dll, the Mid-Tier data services
component , AVMTDSCI.dll, handles real-time data communications between client
applications and the dialer database. The AVMTDSCI.dll writes error messages to two logs,
avmtdscil0.log and dscHier0.log in an AVMTier directory that the dll creates. Monitor error
messages may appear in both logs.
Note:
Note:
Hierarchy Manager and Analyst error messages only appear in the dscHier0.log
file.
The next couple sections detail a couple common Monitor issues.
Log on to dialer, but no data in Monitor
If the user can log on to the dialer, but no data appears in Monitor, follow these step to resolve
the issue:
1. From the Windows Start menu, select Settings > Control Panel > Administrative Tools
> Data Sources (ODBC).
2. Click on the System DSN tab.
3. Select AvayaPDSDB from the list of System Data Sources.
4. Click Configure.
5. In the Oracle ODBC Driver Configuration window, click Test Connection.
6. You should see a Connection successful message. Otherwise you see an error
message which you should record. If successful, go to the next step.
7. Use Health Manager, Dialer Services > Data to check that HDSC and EVENT_SERVICE
are running.
8. If either is not running, use Health Manager to start the process that is not running.
9. On the middle-tier server, use check_db to make sure the database is running.
10. If the database process is not running, use start_db on the server as instructed in Avaya
Proactive Contact Software Reference Scripts. If the problem persists, go to the next step.
11. Check the AVMTSDCI.log file or Windows Event Viewer for errors.
Stale Monitor data
If agent states are not being updated or jobs that have stopped are listed as active, the data
available to Monitor is stale. Follow these steps to resolve the issue:
1. Use Health Manager, Dialer Services > Data to check that STAT_PUMP is running.
172
Maintenance and Troubleshooting Guide
March 2008
2. If i is not running, use Health Manager to start STAT_PUMP.
3. On the middle-tier server, use check_db to make sure the database is running.
4. If the database process is not running, use start_db on the server as instructed in Avaya
Proactive Contact Software Reference Scripts. If the problem persists, go to the next step.
5. Check the AVMTSDCI.log file or Windows Event Viewer for errors.
Maintenance and Troubleshooting Guide
March 2008
173
174
Maintenance and Troubleshooting Guide
March 2008
Error message, source and error
description table
The table in this section includes the error message number, source files and a more complete
description of the condition that generated the error message.
Error
Numbers
Found in these files
Extended Description
E?????
v_dialer\dialer\src\core\agent.c
Timed out waiting for response
from porter
E00000
v_dialer\dialer\src\core\job_strter.c
Error loading job chain
E00500
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\donotcall.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\enforcer\src\enforcer.cpp
v_dialer\dialer\src\swif\exec\swid_main.c
v_dialer\dialer\src\core\nuisance.c
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\core\recall_rmp.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\core\switcher.c
v_dialer\dialer\src\dbconst\writetape.c
Caught signal number <num>
Maintenance and Troubleshooting Guide
March 2008
175
E00501
176
v_dialer\admin\src\signalit.c
v_dialer\admin\src\termprocess.c
v_dialer\dialer\src\utility\agentcheck.c
v_dialer\dialer\src\utility\agentcount.c
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\beeper.c
v_dialer\dialer\src\callsel\callconn.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\utility\list_status.c
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
v_dialer\dialer\src\reports\rpt_mgr\
pds_view.c
v_dialer\dialer\src\reports\rpt_mgr\
rpt_view.c
Maintenance and Troubleshooting Guide
Caught signal <num> and
terminated
March 2008
E00502
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\admin\src\createop.c
v_dialer\dialer\src\callsel\cseldmp.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\callsel\call_stgy.c
v_dialer\dialer\src\core\agent_misc_util.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\jobscrn.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\port_hndle.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
v_dialer\dialer\src\swif\exec\swid_main.c
v_dialer\dialer\src\lstextract\ext_list.c
v_dialer\dialer\src\preprocess\ij_merge.c
v_dialer\ivr\src\ivr_config.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\markrec\latemrk.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\editor\master_ed.c
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\postupdate\
postupdate.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\preprocess\setzones.c
v_dialer\dialer\src\utility\ziptoarea.c
v_dialer\dialer\src\core\screen.c
Maintenance and Troubleshooting Guide
Failed to allocate memory
March 2008
177
178
E00503
v_dialer\dialer\src\callsel\callconn.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\dbconst\selection.c
v_dialer\dialer\src\reports\history\
hist_rpt.c
v_dialer\dialer\src\lstextract\ext_data.c
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\markrec\set_field.c
v_dialer\dialer\src\menu\submenu.c
v_dialer\dialer\src\dbconst\writetape.c
Pattern error
E00504
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\swif\exec\swid_main.c
v_dialer\dialer\src\utility\pds_pg.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
Bad argument
E00505
v_dialer\dialer\src\markrec\latelst.c
Invalid time format
E00506
v_dialer\dialer\src\markrec\latelst.c
Invalid date format
E00507
v_dialer\dialer\src\listserver\listserver.c
v_dialer\dialer\DialerCmdCtrl\
MasterCfgTable.cpp
v_dialer\dialer\src\utility\port_start.c
Environment variable not set
E00508
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\listserver\listserver.c
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\preprocess\setzones.c
v_dialer\dialer\src\reports\history\
vrecords.c
Mastercfg error
Maintenance and Troubleshooting Guide
March 2008
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\preprocess\msgmap.c
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\src\postupdate\
postupdate.c
v_dialer\dialer\src\dbmaint\rec_update.c
v_dialer\dialer\src\scrnbld\scrnbld.c
v_dialer\dialer\src\markrec\set_field.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\reports\history\
vrecords.c
Entry <value> missing/invalid in
<filename> file
E00511
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\preprocess\ij_merge.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\preprocess\setzones.c
v_dialer\dialer\src\dbconst\writetape.c
Failed to process file
<filename>
E00512
v_dialer\dialer\DialerCmdCtrl\
DccsVmValidator.cpp
Audio file name too long
E00513
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\utility\pds_pg.c
v_dialer\dialer\src\scrnbld\scrnbld.c
Invalid file name
E00509
E00510
E00514
Maintenance and Troubleshooting Guide
March 2008
179
E00515
180
v_dialer\admin\src\addgroup.c
v_dialer\dialer\src\utility\adump.c
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\callsel\callconn.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\admin\src\createop.c
v_dialer\dialer\src\callsel\cseldmp.c
v_dialer\dialer\src\core\agent_io_util.c
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\chainhandler.c
v_dialer\dialer\src\core\dnc_mark.c
v_dialer\dialer\src\core\install_ext.c
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\screen.c8
v_dialer\dialer\src\core\transfer.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\pcextract\fileops.c
v_dialer\dialer\src\custom\readwrt.c
v_dialer\dialer\src\utility\portcorr.c
v_dialer\dialer\src\utility\test_help.c
v_dialer\library\libdsi\src\rpt_server.c
v_dialer\dialer\src\swif\exec\opmoncfg.c
v_dialer\dialer\src\utility\edump.c
v_dialer\dialer\src\utility\fdictdump.c
v_dialer\dialer\src\lettergen\formlet.c
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\preprocess\
hsh_dump.c
v_dialer\dialer\src\preprocess\ij_merge.c
v_dialer\dialer\src\imon\internetmon.c
v_dialer\ivr\src\ivr_config.c
v_dialer\dialer\src\utility\jobkeys.c
Maintenance and Troubleshooting Guide
Unable to open file
March 2008
E00515
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\markrec\latemrk.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\lettergen\mail_label.c
v_dialer\dialer\src\editor\master_ed.c
v_dialer\dialer\src\menu\menu.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\core\msg_loader.c
v_dialer\dialer\DialerServiceActivation\src\
DSAIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
v_dialer\dialer\enforcer\src\enlicense.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptValidatingProcessor_utest.cpp
v_dialer\dialer\src\core\nuisance.c
v_dialer\dialer\src\reports\history\
op_hist.c
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\postupdate\
postupdate.c
v_dialer\dialer\src\utility\print_pif.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbmaint\rec_update.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\reports\rpt_mgr\
rpt_view.c
v_dialer\dialer\src\utility\scan.c
v_dialer\dialer\src\scrnbld\scrnbld.c
v_dialer\dialer\src\markrec\set_field.c
v_dialer\dialer\src\menu\submenu.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\reports\history\
vrecords.c
v_dialer\dialer\src\dbconst\writetape.c
v_dialer\dialer\src\utility\ziptoarea.c
E00516
v_dialer\dialer\DialerServiceActivation\src\
DSAIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
Maintenance and Troubleshooting Guide
File did not close
March 2008
181
182
E00517
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\utility\ziptoarea.c
Unable to create file
E00518
v_dialer\dialer\src\callsel\callconn.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\agent_misc_util.c
v_dialer\dialer\src\core\agent_sys_util.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\pcextract\fileops.c
v_dialer\dialer\src\reports\history\
op_hist.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
v_dialer\dialer\src\reports\history\
op_hist.c
v_dialer\dialer\src\dbconst\readtape.c
<process_name> failed to read
from file <filename>
E00519
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\dbconst\writetape.c
Failed to write to file
<filename>
E00520
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\reports\history\
vrecords.c
Failed to lock file
E00521
v_dialer\library\libdsi\src\getnum.c
Failed to unlock file
E00522
v_dialer\dialer\src\utility\enq_pty.c
v_dialer\dialer\Cmdctrl\HeadsetLib.cpp
v_dialer\dialer\Cmdctrl\ShmAccess.cpp
Failed to attach shared memory
E00523
v_dialer\library\libdsi\src\conn_queue.c
Failed to detach shared
memory
E00524
v_dialer\library\libdsi\src\conn_queue.c
Failed to remove shared
memory
E00525
v_dialer\library\libdsi\src\mqueue.c
Failed to get message queue
Maintenance and Troubleshooting Guide
March 2008
E00526
v_dialer\library\libdsi\src\mqueue.c
Failed to send message
E00527
v_dialer\library\libdsi\src\mqueue.c
Unable to receive a message
E00528
v_dialer\library\libdsi\src\mqueue.c
Unable to remove message
queue
E00529
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\dbmaint\rec_update.c
v_dialer\dialer\src\swif\exec\swid_main.c
Failed to invoke function
E00530
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\dnc_mark.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\lstextract\ext_data.c
v_dialer\dialer\src\lstextract\ext_list.c
v_dialer\dialer\src\utility\fdictdump.c
v_dialer\dialer\src\lettergen\formlet.c
v_dialer\dialer\src\preprocess\ij_merge.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\lettergen\mail_label.c
v_dialer\dialer\src\preprocess\setzones.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
v_dialer\dialer\src\dbconst\writetape.c
v_dialer\dialer\src\utility\ziptoarea.c
Unable to open list
<calling_list_name>
Maintenance and Troubleshooting Guide
March 2008
183
184
E00531
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\dnc_mark.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\preprocess\ij_merge.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\postupdate\
postupdate.c
v_dialer\dialer\src\preprocess\setzones.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
v_dialer\dialer\src\dbconst\writetape.c
v_dialer\dialer\src\utility\ziptoarea.c
Failed to read calling list
definition
E00532
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\de_reject.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\lstextract\ext_data.c
v_dialer\dialer\src\preprocess\ij_merge.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\markrec\latemrk.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\lettergen\mail_label.c
v_dialer\dialer\src\preprocess\setzones.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
v_dialer\dialer\src\utility\ziptoarea.c
Field <name> not defined in
calling list <filename>
E00533
v_dialer\dialer\src\preprocess\listdist.c
Field has incorrect length
E00534
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\transfer.c
v_dialer\dialer\src\dbconst\readtape.c
Not a calling list
Maintenance and Troubleshooting Guide
March 2008
E00535
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
No space on file system
E00536
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\dbconst\moj_conv.c
Failed to initialize keyboard
E00537
v_dialer\dialer\src\core\api_jobctl.c
Failed to initialize screen
environment
E00538
v_dialer\dialer\src\core\api_jobctl.c
Failed to setup command keys
E00539
v_dialer\dialer\src\core\api_jobctl.c
Failed to create jobmon
graphical user interface (GUI)
E00540
v_dialer\library\libui\src\vlui.c
Failed to create window pointer
E00541
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\utility\vfiles.c
Unable to open keys file
E00542
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\dbconst\selection.c
Field not defined in calling list
E00543
v_dialer\dialer\src\preprocess\clhash.c
Field not defined in calling list
E00544
v_dialer\dialer\src\core\listops.c
Invalid pattern
E00545
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\agent_misc_util.c
v_dialer\dialer\src\core\chainhandler.c
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\op_handler.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\core\port_hndle.c
v_dialer\dialer\src\core\scripter.c
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\src\core\recall_rmp.c
Process unable to send
<string> to <process_name>
E00546
v_dialer\library\libutil\src\checkdir.c
Failed to create directory
Maintenance and Troubleshooting Guide
March 2008
185
E00547
v_dialer\library\libutil\src\checkdir.c
Non-directory in directory path
E00548
v_dialer\dialer\src\core\conn_mgr.c
midtier\unixdev\services\src\
ShmDataReader.cpp
Missing or invalid entry in file
E00549
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\listserver\listserver.c
midtier\unixdev\services\src\
ShmDataReader.cpp
<op_name> operation failed for
file <file_name>
E00550
midtier\unixdev\services\src\
ShmDataReader.cpp
Invalid entry for <name> in
<filename>
E00552
v_dialer\dialer\src\listserver\listserver.c
midtier\unixdev\services\src\
ShmDataReader.cpp
Failed to open directory
<dir_name>
E00553
midtier\unixdev\services\src\
ShmDataReader.cpp
File <filename> does not exist
E00554
v_dialer\dialer\src\listserver\listserver.c
<opname> operation failed
E00555
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\\callsel\md_callsel.c
midtier\unixdev\services\src\
EventServiceIF_i.cpp
v_dialer\dialer\DialerCmdCtrl\
expr_utest.cpp
<string>-<string>
E00556
v_dialer\library\libutil++\src\
ReadOnlyFile.cpp
File <filename> exists, but is
not readable by user
<user_name
E00557
v_dialer\library\libutil++\src\
WriteOnlyFile.cpp
File <filename> exists, but
cannot be written by user
<user_name
E10012
v_dialer\library\libdsi\src\script_lng.c
Pattern error at line <number>
E10013
v_dialer\library\libdsi\src\sock_stream.cpp
Cannot find service in /etc/
services
E10014
v_dialer\library\libdsi\src\sock_stream.cpp
Socket call failed
E10015
v_dialer\library\libdsi\src\sock_stream.cpp
Unable to bind to local address
E10016
v_dialer\library\libdsi\src\sock_stream.cpp
Unable to setup listen on
socket
E00551
186
Maintenance and Troubleshooting Guide
March 2008
E10017
v_dialer\library\libdsi\src\sock_stream.cpp
Unable to accept connection on
socket
E10018
v_dialer\library\libdsi\src\sock_stream.cpp
Unable to connect to socket
E10019
v_dialer\library\libdsi\src\sock_stream.cpp
Unable to send data to socket
E10200
v_dialer\library\libdsi\src\getnum.c
Unequal phone number field
lengths in file <filename>
E10201
v_dialer\dialer\src\core\operator.c
Invalid line selection
v_dialer\dialer\src\core\job_strter.c
dialer_client\Redwood\VBApps\Editor\
MDIForm1.frm
File <filename> does not exist
E10629
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
dialerclient\Redwood\VBApps\Editor\
Classes\CJobs.cls
Selection list not available for
use
E10630
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
STATUSFLAG field missing
E10649
v_dialer\library\libdsi\src\job_cntrl.c
Failed to find linked job file
E10650
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\library\libdsi\src\job_cntrl.c
Linking between virtual agent
jobs and non-virtual jobs is not
permitted
E10654
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
dialerclient\Redwood\VBApps\Editor\
Classes\CJobs.cls
Could not verify selection list
for job
E10655
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
dialerclient\Redwood\VBApps\Editor\
Classes\CJobs.cls
Could not verify selection list
for job
E10600
E10601
E10602
E10603 E10628
E10631 E10648
E10651-E1065
3
Maintenance and Troubleshooting Guide
March 2008
187
E10656
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
dialerclient\Redwood\VBApps\Editor\
Classes\CJobs.cls
Selection list not created with
this calling list
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Failed to read file header
v_dialer\library\libutil++\src\
KeywordValue.cpp
v_dialer\library\libutil++\src\
mbcs_string.cpp
v_dialer\library\libutil++\src\
SerializableErrorRev_dialer\dialer\src\
core\porter.cpp
v_dialer\library\libutil++\src\
SerializableKvErrorStorage.cpp
agent - Failed to read from file
<name>
E10850
v_dialer\library\libdsi\src\claccess.c
Unable to open list
<calling_list_name>
E10851
v_dialer\library\libdsi\src\claccess.c
Unable to access host <name>
using name
E10852
v_dialer\library\libdsi\src\claccess.c
Socket failed
E10853
v_dialer\library\libdsi\src\claccess.c
Socket connection to list server
running on <name> failed
E10854
v_dialer\library\libdsi\src\claccess.c
Attempt to store list_client on
host failed
E10855
v_dialer\library\libdsi\src\claccess.c
Write error
E10856
v_dialer\library\libdsi\src\claccess.c
clstat <xfd> failed
E10857
v_dialer\library\libdsi\src\claccess.c
Clear fdict <number> failed
E10858
v_dialer\library\libdsi\src\claccess.c
Unable to access host <name>
using name
E10657-E1065
9
E10660E10667
E10800-E1080
5
E10806
E10807
E10808
E10809-E1082
4
188
Maintenance and Troubleshooting Guide
March 2008
E10859
v_dialer\library\libdsi\src\cllaccess.c
Bad file descriptor <num>
E10860
v_dialer\library\libdsi\src\claccess.c
File corruption or record size
mismatch detected in calling list
(name>
E10861
v_dialer\library\libdsi\src\cllaccess.c
Failed to remove file
<filename>
E10900
v_dialer\library\libdsi\src\conn_crit.c
Mastercfg error
E11000
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid delay specification
E11001
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Recall attempt can’t exceed
<num>
E11002
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid recall code <code>
E11003
v_dialer\library\libutil++\src\
FileMasterConfig.cpp
v_dialer\library\libdsi\src\cstgy.c
Failed to determine max
number of phones
E11004
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Failed to determine max
number of phones
E11005
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Gap found between selection
criteria lines
E11006
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Extra comma in selection
criteria
E11007
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid phone <number>
E11008
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Field name <name> is invalid
E11009
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid field value <value>
Maintenance and Troubleshooting Guide
March 2008
189
E11010
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid logical connector
<name>
E11011
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
Invalid time zone character
<char>
E11013
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid ring count <num>
E11014
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid call detection mode
<name>
E11015
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid delay specification
E12000
v_dialer\library\libdsi\src\getnum.c
Unequal phone number field
lengths in file <name>
E12100
v_dialer\library\libutil\src\molocale.c
Molocale - unknown language
name <lang>
E12101
v_dialer\library\libutil\src\molocale.c
Molocale - failed to set locale
<name>
E12150
v_dialer\library\libdsi\src\pvrs_helper.c
Preview record search failed to
initialize
E12152
v_dialer\library\libdsi\src\pvrs_helper.c
v_dialer\dialer\src\dbmaint\record_ed.c
No previous record
E12153
v_dialer\library\libdsi\src\pvrs_helper.c
v_dialer\dialer\src\dbmaint\record_ed.c
No more records
E12154
v_dialer\dialer\src\core\oper_pvrs.c
v_dialer\dialer\src\dbmaint\record_ed.c
Fail to load record
E12155
v_dialer\dialer\src\core\oper_pvrs.c
Record currently in use
E12156
v_dialer\library\libdsi\src\pvrs_helper.c
No record found
E11012
E12001
E12151
E12200-E1220
3
190
Maintenance and Troubleshooting Guide
March 2008
E12400
v_dialer\library\libdsi\src\keystroke.c
v_dialer\library\libutil\src\tsystem.c
tget returned error number
<num> raising signal <num>
E12600
v_dialer\library\libdsi\src\map_dict.c
v_dialer\library\libcallsel\src\
map_dict2.cpp
Calling list <name> is not in
shared memory
E12601
v_dialer\library\libdsi\src\map_dict.c
v_dialer\library\libcallsel\src\
map_dict2.cpp
Calling list line count does not
match shared memory
E12800
v_dialer\library\libdsi\src\map_scrn.c
Failed to find screen <name>
E13000
v_dialer\library\libdsi\src\mqueue.c
IPC - invalid input argument
E13001
v_dialer\library\libdsi\src\mqueue.c
IPC - invalid ipc entry
E13003
v_dialer\library\libdsi\src\mqueue.c
Invalid ipc number <num>
E13004
v_dialer\library\libdsi\src\mqueue.c
Warning: CFRM message
truncated
E13005
v_dialer\library\libdsi\src\mqueue.c
Timed out waiting for <string>
confirmation
E13006
v_dialer\library\libdsi\src\mqueue.c
Response message too long
E13007
v_dialer\library\libdsi\src\mqueue.c
IPC - Failed to open opmon
message queue
E13008
v_dialer\library\libdsi\src\mqueue.c
<process_name> Failed on
semaphore removal,
err=<num> key=<num>
E13009
v_dialer\library\libdsi\src\mqueue.c
<process_name> - Failed on
semaphore operation, err
<err_num> key =
<sem_key_id> code =
<op_code>
E13010
v_dialer\library\libdsi\src\mqueue.c
<process_name> - Accessing
bad semaphore
E13011
v_dialer\library\libdsi\src\mqueue.c
<process_name> - Failed to
open semaphore, err(<num>)
E13200
v_dialer\library\libdsi\src\opident.c
Headset value
(<headset_value>,
<return_value>) out of bound
E13201
v_dialer\library\libdsi\src\opident.c
Headset <id_num> not
specified in dgswitch.cfg file
E13002
Maintenance and Troubleshooting Guide
March 2008
191
E13400
E13401
E13402
v_dialer\library\libdsi\src\phonefmt.c
Missing prefix
E13403
v_dialer\library\libdsi\src\phonefmt.c
Missing line type
E13404
v_dialer\library\libdsi\src\phonefmt.c
Missing or invalid num of chars
to strip
E13406
v_dialer\library\libdsi\src\phonefmt.c
Missing suffix
E13407
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Duplicate ALL phone numbers
specification
E13408
v_dialer\library\libdsi\src\phonefmt.c
Phone number too long
E13409
v_dialer\library\libdsi\src\phonefmt.c
Phone number too long
E13410
v_dialer\library\libdsi\src\phonefmt.c
Missing std to dial phone
number format
E13411
v_dialer\library\libdsi\src\phonefmt.c
Invalid use of ALL phone
numbers specification
E13412
v_dialer\library\libdsi\src\phonefmt.c
Missing phone numbers
E13600
v_dialer\library\libdsi\src\rpt_server.c
Report failed, system out of
space
E13800
v_dialer\library\libdsi\src\swcfg_tbl.c
Invalid headset number <num>
<line>
E13801
v_dialer\library\libdsi\src\swcfg_tbl.c
Headset port number <num>
out of range
E13802
v_dialer\library\libdsi\src\swcfg_tbl.c
Normal trunk port number
<num> out of range
E13803
v_dialer\library\libdsi\src\swcfg_tbl.c
Invalid normal trunk equipment
number <num>
v_dialer\library\libdsi\src\swcfg_tbl.c
Invalid normal trunk equipment
number <num>
v_dialer\library\libdsi\src\swcfg_tbl.c
Failed to process line
(<line_buffer_name>)
E13405
E13804
E13805
E13806
E13807
E14100
192
Maintenance and Troubleshooting Guide
March 2008
E14101
E14200
v_dialer\library\libdsi\src\vlloccall.c
Missing delay specification
E14201
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Missing or invalid low range
E14202
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Invalid range character
E14203
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Missing high range
E14204
v_dialer\library\libdsi\src\vlloccall.c
Invalid delay specification
E14205
v_dialer\library\libdsi\src\vlloccall.c
Missing completion code
E14206
v_dialer\library\libdsi\src\vlloccall.c
Missing completion code
E14207
v_dialer\library\libdsi\src\vlloccall.c
Range does not come after
previous range
E14208
v_dialer\library\libdsi\src\vlloccall.c
Missing limit
E14209
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
future use - phonefmt.cfg
E14210
v_dialer\library\libdsi\src\vlloccall.c
Missing time zone specification
for country <num>
E14211
v_dialer\library\libdsi\src\vlloccall.c
Missing or invalid time zone
designation
E14212
v_dialer\library\libdsi\src\vlloccall.c
Missing or invalid reject phone
number pattern
E14213
v_dialer\library\libdsi\src\vlloccall.c
Missing or invalid reject phone
number pattern
E14214
v_dialer\library\libdsi\src\vllocmisc.c
v_dialer\library\libdsi\src\vllocport.c
Duplicate country specified
E14215
v_dialer\library\libdsi\src\vllocmisc.c
v_dialer\library\libdsi\src\vllocport.c
Invalid answer delay time
E14216
v_dialer\library\libdsi\src\vllocport.c
Invalid DAA type
E14217
v_dialer\library\libdsi\src\vllocport.c
Invalid VM2 locale code
E14218
v_dialer\library\libdsi\src\vlloccall.c
Invalid phone number length
E14219
v_dialer\library\libdsi\src\vlloccall.c
Rejected phone number
(L<num>)
Maintenance and Troubleshooting Guide
March 2008
193
E14220
v_dialer\library\libdsi\src\vlloccall.c
Cannot find time zone for
phone number
E14221
v_dialer\library\libdsi\src\vllocport.c
Invalid offhook retry delay
E14222
v_dialer\library\libdsi\src\vllocport.c
Invalid wait limit
E14400
194
E14401
v_dialer\dialer\src\preprocess\ij_merge.c
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
E14402
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
E14404
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
E14405
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
E14406
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
E14407
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
E14408
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
E14409
v_dialer\library\libdsi\src\conn_queue.c
E14410
v_dialer\library\libdsi\src\conn_queue.c
E14800
v_dialer\library\libutil\src\tcap.c
E14801
v_dialer\library\libutil\src\tcap.c
E14802
v_dialer\library\libutil\src\tcap.c
E14900
v_dialer\library\libutil\src\terminal.c
E14901
v_dialer\library\libutil\src\terminal.c
E15200
v_dialer\library\libui\src\vlui.c
Maintenance and Troubleshooting Guide
March 2008
E15201
v_dialer\library\libui\src\vlui.c
E15202
v_dialer\library\libui\src\vlui.c
E15203
v_dialer\library\libui\src\vlui.c
E15204
v_dialer\library\libui\src\vlui.c
E15205
v_dialer\library\libui\src\vlui.c
E15206
v_dialer\library\libui\src\vlui.c
E15400
v_dialer\library\libdsi\src\bsrch.c
E15401
v_dialer\library\libdsi\src\bsrch.c
E15402
v_dialer\library\libdsi\src\bsrch.c
E15403
v_dialer\library\libdsi\src\bsrch.c
E15404
v_dialer\library\libdsi\src\bsrch.c
E15420
v_dialer\library\libdsi\src\bsrch.c
E15421
v_dialer\library\libdsi\src\bsrch.c
E15422
v_dialer\library\libdsi\src\bsrch.c
E15424
v_dialer\library\libdsi\src\bsrch.c
E16000
v_dialer\library\libutil\src\labfdctry.c
E16100
v_dialer\library\libutil\src\labfile.c
E16101
v_dialer\library\libutil\src\labfile.c
E16102
v_dialer\library\libutil\src\labfile.c
E16400
v_dialer\library\libutil\src\preftree.c
E16401
v_dialer\library\libutil\src\preftree.c
E16402
v_dialer\library\libutil\src\preftree.c
E16403
v_dialer\library\libutil\src\preftree.c
E16404
v_dialer\library\libutil\src\preftree.c
E16405
v_dialer\library\libutil\src\preftree.c
E16406
v_dialer\library\libutil\src\preftree.c
E16407
v_dialer\library\libutil\src\preftree.c
E16408
v_dialer\library\libutil\src\preftree.c
E16409
v_dialer\library\libutil\src\preftree.c
Maintenance and Troubleshooting Guide
March 2008
195
196
E16410
v_dialer\library\libutil\src\preftree.c
E16411
v_dialer\library\libutil\src\preftree.c
E16500
v_dialer\library\libutil\src\hash.c
E16501
v_dialer\library\libutil\src\hash.c
E16600
v_dialer\library\libutil\src\expr.c
E16601
v_dialer\library\libutil\src\expr.c
E16602
v_dialer\library\libutil\src\expr.c
E16603
v_dialer\library\libutil\src\expr.c
E16604
v_dialer\library\libutil\src\expr.c
E16605
v_dialer\library\libutil\src\expr.c
E16606
v_dialer\library\libutil\src\expr.c
E16607
v_dialer\library\libutil\src\expr.c
E16608
v_dialer\library\libutil\src\expr.c
E16609
v_dialer\library\libutil\src\expr.c
E16610
v_dialer\library\libutil\src\expr.c
E16611
v_dialer\dialer\DialerCmdCtrl\
expr_utest.cpp
E16612
v_dialer\library\libutil\src\expr.c
E16620
v_dialer\library\libutil\src\expr.c
E16621
v_dialer\library\libutil\src\expr.c
E16800
v_dialer\library\libutil\src\undefined.c
E16900
v_dialer\library\libutil\src\exec_prog.c
E16901
v_dialer\library\libutil\src\exec_prog.c
E16902
v_dialer\library\libutil\src\exec_prog.c
E16903
v_dialer\library\libutil\src\exec_prog.c
E16904
v_dialer\library\libutil\src\exec_prog.c
E16905
v_dialer\library\libutil\src\exec_prog.c
E16906
v_dialer\library\libutil\src\exec_prog.c
E16907
v_dialer\library\libutil\src\exec_prog.c
Maintenance and Troubleshooting Guide
March 2008
E16908
v_dialer\library\libutil\src\exec_prog.c
E16909
v_dialer\library\libutil\src\exec_prog.c
E16910
v_dialer\library\libutil\src\exec_prog.c
E16911
v_dialer\library\libutil\src\exec_prog.c
E16912
v_dialer\library\libutil\src\exec_prog.c
E17000
v_dialer\library\libutil\src\account.c
v_dialer\library\libutil++\src\account_r.c
E17001
E17002
E17003
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
E17004
E17005
v_dialer\library\libutil\src\config.c
E17100
E17101
E18200
v_dialer\library\libswif\src\port_dg.c
E18201
v_dialer\library\libswif\src\port_dg.c
E18202
v_dialer\library\libswif\src\port_dg.c
E18203
v_dialer\dialer\src\core\msg_loader.c
v_dialer\library\libswif\src\port_dg.c
E18204
v_dialer\library\libswif\src\port_dg.c
E18205
v_dialer\library\libswif\src\port_dg.c
E18206
v_dialer\library\libswif\src\port_dg.c
E18207
v_dialer\library\libswif\src\port_dg.c
E18208
v_dialer\library\libswif\src\port_dg.c
E18209
v_dialer\library\libswif\src\port_dg.c
E18210
v_dialer\library\libswif\src\port_dg.c
E18211
E18212
v_dialer\library\libswif\src\port_dg.c
E18213
v_dialer\library\libswif\src\port_dg.c
Maintenance and Troubleshooting Guide
March 2008
197
E18214
v_dialer\library\libswif\src\port_dg.c
E18215
v_dialer\library\libswif\src\port_dg.c
E18216
E18217
E18218
198
E18219
v_dialer\library\libswif\src\port_dg.c
E18220
v_dialer\library\libswif\src\port_dg.c
E18221
v_dialer\library\libswif\src\port_dg.c
E18222
v_dialer\library\libswif\src\port_dg.c
E18223
v_dialer\library\libswif\src\port_dg.c
E18224
v_dialer\library\libswif\src\port_dg.c
E18225
v_dialer\library\libswif\src\port_dg.c
E18226
v_dialer\library\libswif\src\port_dg.c
E18227
v_dialer\library\libswif\src\port_dg.c
E18228
v_dialer\library\libswif\src\port_dg.c
E18400
v_dialer\library\libswif\src\swid.c
E18401
v_dialer\library\libswif\src\swid.c
E18402
v_dialer\library\libswif\src\swid.c
E18403
v_dialer\library\libswif\src\swid.c
E18404
v_dialer\library\libswif\src\swid.c
E18405
v_dialer\library\libswif\src\swid.c
E18406
v_dialer\library\libswif\src\swid.c
E18407
v_dialer\library\libswif\src\swid.c
E18408
v_dialer\library\libswif\src\swid.c
E18409
v_dialer\library\libswif\src\swid.c
E18410
v_dialer\library\libswif\src\swid.c
E18411
v_dialer\library\libswif\src\swid.c
E18412
v_dialer\library\libswif\src\swid.c
E18413
v_dialer\library\libswif\src\swid.c
Maintenance and Troubleshooting Guide
March 2008
E18414
v_dialer\library\libswif\src\swid.c
E18415
v_dialer\library\libswif\src\swid.c
E18416
v_dialer\library\libswif\src\swid.c
E19000
v_dialer\library\libswif\src\swie.c
E19001
v_dialer\library\libswif\src\swie.c
E19002
v_dialer\library\libswif\src\swie.c
E19003
v_dialer\library\libswif\src\swie.c
E19004
v_dialer\library\libswif\src\swie.c
E19005
v_dialer\library\libswif\src\swie.c
E19006
v_dialer\library\libswif\src\swie.c
E19007
v_dialer\library\libswif\src\swie.c
E19200
v_dialer\library\libswif\src\swiq.c
E19201
v_dialer\library\libswif\src\swiq.c
E19400
v_dialer\library\libswif\src\switch_dg.c
E19401
v_dialer\library\libswif\src\switch_dg.c
E19402
v_dialer\library\libswif\src\switch_dg.c
E19403
v_dialer\library\libswif\src\switch_dg.c
E19404
v_dialer\library\libswif\src\switch_dg.c
E19405
v_dialer\library\libswif\src\switch_dg.c
E19406
v_dialer\library\libswif\src\switch_dg.c
v_dialer\library\libswif\src\port_sd.c
E19407
v_dialer\library\libswif\src\switch_dg.c
E19408
v_dialer\library\libswif\src\switch_dg.c
E19600
v_dialer\library\libswif\src\swix.c
E19601
v_dialer\library\libswif\src\swix.c
E19602
v_dialer\library\libswif\src\swix.c
E19603
v_dialer\library\libswif\src\swix.c
E19604
v_dialer\library\libswif\src\swix.c
E19605
v_dialer\library\libswif\src\swix.c
Maintenance and Troubleshooting Guide
March 2008
199
E19606
v_dialer\library\libswif\src\swix.c
E19607
v_dialer\library\libswif\src\swix.c
E19608
v_dialer\library\libswif\src\swix.c
E19609
v_dialer\library\libswif\src\swix.c
E25000
v_dialer\dialer\src\callsel\call_scrn.c
E25001
v_dialer\dialer\src\callsel\call_scrn.c
E25002
v_dialer\dialer\src\callsel\call_scrn.c
E25003
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\core\agent_misc_util.c
E25004
v_dialer\dialer\src\callsel\call_scrn.c
E25005
v_dialer\dialer\src\callsel\call_scrn.c
E25006
E25007
v_dialer\dialer\src\callsel\call_scrn.c
E25008
E25009
v_dialer\dialer\src\callsel\call_scrn.c
E25010
v_dialer\dialer\src\callsel\call_scrn.c
E25011
v_dialer\dialer\src\callsel\call_scrn.c
E25012
200
E25013
v_dialer\dialer\src\callsel\call_scrn.c
E25014
v_dialer\dialer\src\callsel\call_scrn.c
E25015
v_dialer\dialer\src\callsel\call_scrn.c
E25016
v_dialer\dialer\src\callsel\call_scrn.c
E25017
v_dialer\dialer\src\callsel\call_scrn.c
E25018
v_dialer\dialer\src\callsel\call_scrn.c
E25019
v_dialer\dialer\src\callsel\callsel.c
E25020
v_dialer\dialer\src\callsel\callsel.c
E25021
v_dialer\dialer\src\callsel\callsel.c
E25022
v_dialer\dialer\src\callsel\callsel.c
E25023
v_dialer\dialer\src\callsel\callsel.c
Maintenance and Troubleshooting Guide
March 2008
E25024
v_dialer\dialer\src\callsel\call_scrn.c
E25025
v_dialer\dialer\src\callsel\call_scrn.c
E25026
v_dialer\dialer\src\callsel\callsel.c
E25027
E25028
v_dialer\dialer\src\callsel\callsel.c
E25029
v_dialer\dialer\src\callsel\call_scrn.c
E25030
E25031
v_dialer\library\libcallsel\src\cllcallsel.cpp
E25032
v_dialer\library\libcallsel\src\cllcallsel.cpp
E25501
v_dialer\dialer\src\callsel\callconn.c
E25502
v_dialer\dialer\src\callsel\callconn.c
E25503
v_dialer\dialer\src\callsel\callconn.c
E25504
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\callsel\callconn.c
E25505
v_dialer\dialer\src\callsel\callconn.c
E27000
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceController.cxx
midtier\unixdev\SysHealth\src\
SystemHealthImpl.cpp
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
E27100
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceController.cxx
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceMonitorIFImpl.cxx
midtier\unixdev\SysHealth\src\
SystemHealthImpl.cpp
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
E27200
Maintenance and Troubleshooting Guide
March 2008
201
E27300
midtier\unixdev\ServiceActivation\src\
SARequest.cxx
midtier\unixdev\ServiceActivation\src\
ServiceActivationIFImpl.cxx
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceMonitorIFImpl.cxx
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E28000
v_dialer\dialer\src\core\switcher.c
Failed to initialize switcher
E28100
v_dialer\dialer\src\core\driver.c
Failed to attach shared memory
E28101
v_dialer\dialer\src\core\driver.c
invalid channel number
<string>
E28102
E28103
v_dialer\dialer\src\core\driver.c
E28104
v_dialer\dialer\src\core\driver.c
E28105
202
E28106
v_dialer\dialer\src\core\driver.c
E28107
v_dialer\dialer\src\core\driver.c
E28108
v_dialer\dialer\src\core\driver.c
E28109
v_dialer\dialer\src\core\driver.c
E28200
v_dialer\dialer\src\core\conn_mgr.c
E28201
v_dialer\dialer\src\core\conn_mgr.c
E28202
v_dialer\dialer\src\core\conn_mgr.c
E28203
v_dialer\dialer\src\core\conn_mgr.c
E28204
v_dialer\dialer\src\core\conn_mgr.c
E28205
v_dialer\dialer\src\core\conn_mgr.c
E28206
v_dialer\dialer\src\core\conn_mgr.c
E28207
v_dialer\dialer\src\core\conn_mgr.c
E28208
v_dialer\dialer\src\core\conn_mgr.c
E28209
v_dialer\dialer\src\core\conn_mgr.c
E28210
v_dialer\dialer\src\core\conn_mgr.c
E28211
v_dialer\dialer\src\core\conn_mgr.c
Maintenance and Troubleshooting Guide
March 2008
E28300
E28301
v_dialer\dialer\src\core\recall_rmp.c
E28302
v_dialer\dialer\src\core\recall_rmp.c
E28303
v_dialer\dialer\src\core\recall_rmp.c
E28304
v_dialer\dialer\src\core\recall_rmp.c
E28305
v_dialer\dialer\src\core\recall_rmp.c
E28306
v_dialer\dialer\src\core\recall_rmp.c
E28307
v_dialer\dialer\src\core\recall_rmp.c
E28308
v_dialer\dialer\src\core\recall_rmp.c
E28309
v_dialer\dialer\src\core\recall_rmp.c
E28310
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\recall_rmp.c
E28400
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E28401
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E28402
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E28404
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E28405
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E28406
v_dialer\dialer\src\core\listops.c
E28407
v_dialer\dialer\src\core\listops.c
Maintenance and Troubleshooting Guide
March 2008
203
E28408
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\nuisance.c
E28409
v_dialer\dialer\src\core\caller.c
E28410
v_dialer\dialer\src\core\caller.c
E28411
v_dialer\dialer\src\core\caller.c
E28412
v_dialer\dialer\src\core\caller.c
E28413,
E28414
204
E28415
v_dialer\dialer\src\core\caller.c
E28416
v_dialer\dialer\src\core\caller.c
E28417
v_dialer\dialer\src\core\listops.c
E28418
v_dialer\dialer\src\core\listops.c
E28419
v_dialer\dialer\src\core\listops.c
E28420
v_dialer\dialer\src\core\listops.c
E28421
v_dialer\dialer\src\core\listops.c
E28422
v_dialer\dialer\src\core\listops.c
E28423
v_dialer\dialer\src\core\listops.c
E28424
v_dialer\dialer\src\core\listops.c
E28425
v_dialer\dialer\src\core\listops.c
E28426
v_dialer\dialer\src\core\listops.c
E28427
v_dialer\dialer\src\core\listops.c
E28428
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\DialerCmdCtrl\
ErrorHandling_utest.cpp
E28429
v_dialer\dialer\src\core\caller.c
E28430
v_dialer\dialer\src\core\caller.c
E28431
v_dialer\dialer\src\core\job_strter.c
E28432
v_dialer\dialer\src\core\job_strter.c
E28433
v_dialer\dialer\src\core\job_strter.c
Maintenance and Troubleshooting Guide
March 2008
E28434
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\job_strter.c
E28435
v_dialer\dialer\src\core\job_strter.c
E28436
v_dialer\dialer\src\core\job_strter.c
E28437
v_dialer\dialer\src\core\job_strter.c
E28438
v_dialer\dialer\src\core\job_strter.c
E28439
v_dialer\dialer\src\core\caller.c
E28440
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\caller.c
E28441
v_dialer\dialer\src\core\caller.c
E28442
v_dialer\dialer\src\core\caller.c
E28443
v_dialer\dialer\src\core\listops.c
E28444
E28445
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\joblib.c
E28446
E28447
v_dialer\dialer\src\core\caller.c
E28448
v_dialer\dialer\src\core\caller.c
E28449
v_dialer\dialer\src\core\caller.c
E28450
v_dialer\dialer\src\core\listops.c
E28451
v_dialer\dialer\src\core\listops.c
E28452
v_dialer\dialer\src\core\listops.c
E28453
v_dialer\dialer\src\core\listops.c
E28454
v_dialer\dialer\src\core\listops.c
E28455
v_dialer\dialer\src\core\listops.c
E28456
v_dialer\dialer\src\core\listops.c
E28457
v_dialer\dialer\src\core\listops.c
E28458
v_dialer\dialer\src\core\listops.c
E28459
v_dialer\dialer\src\core\listops.c
E28460
v_dialer\dialer\src\core\listops.c
Maintenance and Troubleshooting Guide
March 2008
205
E28461
v_dialer\dialer\src\core\listops.c
E28462
v_dialer\dialer\src\core\listops.c
E28463
v_dialer\dialer\src\core\port_hndle.c
E28464
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
E28465
E28600
v_dialer\dialer\src\core\porter.c
E28601
v_dialer\dialer\src\core\porter.c
E28602
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\utility\list_status.c
v_dialer\dialer\enforcer\src\enforcer.cpp
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\core\recall_rmp.c
E28603
v_dialer\dialer\src\core\agent_misc_util.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\core\port_hndle.c
v_dialer\dialer\src\core\portevent.c
v_dialer\dialer\src\core\porter.c
E28604,
E28605
E28606
v_dialer\dialer\src\core\scripter.c
E28607
v_dialer\dialer\src\core\scripter.c
E28608
v_dialer\dialer\src\core\scripter.c
E28609
v_dialer\dialer\src\core\scripter.c
E28610
E28611
v_dialer\dialer\src\core\scripter.c
E28612
v_dialer\dialer\src\core\scripter.c
E28613
v_dialer\dialer\src\core\scripter.c
E28614
v_dialer\dialer\src\core\scripter.c
E28615
206
E28616
v_dialer\library\libdsi\src\script_lng.c
E28617
v_dialer\dialer\src\core\listops.c
Maintenance and Troubleshooting Guide
March 2008
E28618
v_dialer\dialer\src\core\listops.c
E28619
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E28620
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E28621-E2862
5
E28626
v_dialer\dialer\src\core\porter.c
E28627
v_dialer\dialer\src\core\porter.c
E28628
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\core\scripter.c
E28629
v_dialer\dialer\src\core\scripter.c
E28630
v_dialer\dialer\src\core\scripter.c
E28631
v_dialer\dialer\src\core\scripter.c
E28632
v_dialer\dialer\src\core\scripter.c
E28633
v_dialer\dialer\src\core\scripter.c
E28634
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E28800
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid delay specification
E28801
v_dialer\dialer\src\core\screen.c
Record currently in use
E28802
v_dialer\dialer\src\core\screen.c
Recall not allowed for inbound
call
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Job <name> not running
E28803
E28804
Maintenance and Troubleshooting Guide
March 2008
207
E28805
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Job <name> not running
E28812
v_dialer\dialer\src\core\agent_misc_util.c
v_dialer\dialer\src\core\operator.c
Agent <name> logged in
Already - Access Denied
E28813
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
<type> agents are not
permitted on this job
E28814
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
<type> agents are not
permitted on this job
E28815
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Sales verification with unit work
lists is not permitted
E28816
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Inbound agents only permitted
E28817
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Outbound agents only
permitted
E28818
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Outbound or Managed agents
only permitted
E28819
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Only outbound agents
permitted by sales verification
E28820
v_dialer\dialer\src\core\operator.c
Unit value not found, or
unavailable
E28821
v_dialer\dialer\src\core\screen.c
Cannot be DONE from
alternate screen
E28822
v_dialer\dialer\src\core\screen.c
Line not released
E28824
v_dialer\dialer\src\core\screen.c
Changes to record not saved
E28825
v_dialer\dialer\src\core\screen.c
Changes to record not saved
E28826
v_dialer\dialer\src\core\screen.c
Record is no longer available
E28827
v_dialer\dialer\src\core\screen.c
Failed to unlock file
E28828
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\utility\shmon.c
Unknown screen type
E28829
v_dialer\dialer\src\core\screen.c
Field entry is required
E28806-E2881
1
E28823
208
Maintenance and Troubleshooting Guide
March 2008
E28830
v_dialer\dialer\src\core\screen.c
Field value not in acceptable
list
E28831
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Field has non-numeric value
E28832
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid date format
E28833
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid date format
E28834
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid date format
E28835
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid date format
E28836
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid format character found
E28837
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid time format
E28838
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid time format
E28839
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid time format
E28840
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid time format
E28841
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid phone
E28842
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid phonestat - <status>
E28843
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid phone <number>
E28844
v_dialer\dialer\src\core\screen.c
No REL_DIST setting
E28845
v_dialer\dialer\src\core\screen.c
No REL_TME setting
E28846
v_dialer\dialer\src\core\screen.c
No DONE_TME setting
E28847
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Date is before the current date
Maintenance and Troubleshooting Guide
March 2008
209
E28848
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Recall time and date outside
timezone
E28849
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Missing or invalid time zone
designation
E28850
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\screen.c
Cannot open channel to
operator monitor process
E28851
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\screen.c
Operator monitor process does
not respond
v_dialer\dialer\src\core\screen.c
Invalid response from operator
monitor process
E28858
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\operator.c
<agent_name> - Exceeded
operator slots available,
MAXOPS is low
E28859
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\operator.c
<agent><agent_name> Operator number returned
invalid <slot_num>
E28860
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
<string><string>- Operator
number returned wrong
<num1>, job number <num2>
E28861
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\operator.c
Operator slot semaphore not
available
E28862
v_dialer\dialer\src\core\agent.c
Fatal error on select - <num>
E28863
v_dialer\dialer\src\core\agent.c
ERROR - Unknown file
descriptor
E28864
v_dialer\dialer\src\core\agent_io_util.c
v_dialer\dialer\src\core\job_strter.c
Unknown IPC message <string>
E28865
v_dialer\dialer\src\core\agent_io_util.c
Unknown Command message <command>
E28852-E2885
5
E28856
E28857
210
Maintenance and Troubleshooting Guide
March 2008
E28866
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\screen.c
Telephone line not available
E28867
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\agent_tdss_util.c
Telephone line not offhook
E28868
v_dialer\dialer\src\core\agent.c
Callbacks are not permitted on
inbound calls
E28869
v_dialer\dialer\src\core\agent.c
E28870
v_dialer\dialer\src\core\agent_hs_util.c
E28871
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
E28872
v_dialer\dialer\src\core\agent_hs_util.c
E28873
v_dialer\dialer\src\core\agent_hs_util.c
E28874
v_dialer\dialer\src\core\agent_hs_util.c
E28875
v_dialer\dialer\src\core\agent_hs_util.c
E28876
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
E28877
v_dialer\dialer\src\core\agent_hs_util.c
E28878,
E28879
E28880
v_dialer\dialer\src\core\agent_hs_util.c
E28881
v_dialer\dialer\src\core\agent_hs_util.c
E28882
v_dialer\dialer\src\core\agent.c
E28883
v_dialer\dialer\src\core\agent.c
E28884
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_misc_util.c
E28885
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_misc_util.c
v_dialer\dialer\src\core\agent_pvrs_util.c
Maintenance and Troubleshooting Guide
March 2008
211
212
E28886
v_dialer\dialer\src\core\agent.c
E28887
v_dialer\dialer\src\core\agent.c
E28888
v_dialer\dialer\src\core\agent.c
E28889
v_dialer\dialer\src\core\agent.c
E28890
v_dialer\dialer\src\core\agent.c
E28891
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_misc_util.c
E28892
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_misc_util.c
E28893
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_misc_util.c
E28894
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_misc_util.c
E28895
v_dialer\dialer\src\core\agent.c
E28896
v_dialer\dialer\src\core\agent.c
E28897
v_dialer\dialer\src\core\agent.c
E28898
v_dialer\dialer\src\core\agent.c
E28899
v_dialer\dialer\src\core\agent.c
E28900
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_misc_util.c
v_dialer\dialer\src\core\agent_hs_util.c
E28901
v_dialer\dialer\src\core\agent.c
E28902
v_dialer\dialer\src\core\agent.c
E28903
v_dialer\dialer\src\core\agent.c
E28904
v_dialer\dialer\src\core\agent.c
E28905
v_dialer\dialer\src\core\agent.c
E28906
v_dialer\dialer\src\core\agent.c
E28907
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_pvrs_util.c
E28908
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_pvrs_util.c
Maintenance and Troubleshooting Guide
March 2008
E28909
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_pvrs_util.c
E28910
v_dialer\dialer\src\core\agent.c
E28911
v_dialer\dialer\src\core\agent.c
E28912
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_misc_util.c
E28913
v_dialer\dialer\src\core\agent.c
E28914
v_dialer\dialer\src\core\agent.c
E28915
v_dialer\dialer\src\core\agent.c
E28916
v_dialer\dialer\src\core\agent_misc_util.c
E28917
v_dialer\dialer\src\core\agent.c
E28918
v_dialer\dialer\src\core\agent.c
E28919
v_dialer\dialer\src\core\agent.c
E28920
v_dialer\dialer\src\core\agent_hs_util.c
E28921
v_dialer\dialer\src\core\agent_misc_util.c
E28922
v_dialer\dialer\src\core\agent_hs_util.c
E28923
v_dialer\dialer\src\core\agent_hs_util.c
E28924
v_dialer\dialer\src\core\agent_io_util.c
E28925
v_dialer\dialer\src\core\agent_misc_util.c
E28926
v_dialer\dialer\src\core\agent_misc_util.c
E28927
v_dialer\dialer\src\core\agent.c
E28928
v_dialer\dialer\src\core\agent.c
E28929
v_dialer\dialer\src\core\agent.c
E28930
v_dialer\dialer\src\core\agent.c
E28931
v_dialer\dialer\src\core\agent.c
E28932
v_dialer\dialer\src\core\agent.c
E28933
v_dialer\dialer\src\core\agent_io_util.c
E28934
v_dialer\dialer\src\core\agent_io_util.c
E28935
v_dialer\dialer\src\core\agent_misc_util.c
Maintenance and Troubleshooting Guide
March 2008
213
214
E28936
v_dialer\dialer\src\core\agent.c
E28937
v_dialer\dialer\src\core\operator.c
E28938
v_dialer\dialer\src\core\api_jobctl.c
E28940
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\transfer.c
E28942
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\screen.c
E28943
v_dialer\dialer\src\core\screen.c
E28944
v_dialer\dialer\src\core\screen.c
E28945
v_dialer\dialer\src\core\operator.c
E28946
v_dialer\dialer\src\core\agent.c
E28947
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
E28948
v_dialer\dialer\src\core\joblib.c
E28949
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
E28950
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
E28951
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
E28952
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
E28953
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
E28954
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
E28955
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
E28956
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
E28957
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Maintenance and Troubleshooting Guide
March 2008
E28958
v_dialer\dialer\src\core\donotcall.c
E28959
v_dialer\dialer\src\core\operator.c
E28960
v_dialer\dialer\src\core\dnc_mark.c
E28961
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\operator.c
E28962
v_dialer\dialer\src\core\operator.c
E28963
v_dialer\dialer\src\core\screen.c
E28964
v_dialer\dialer\src\core\agent.c
E28965
v_dialer\dialer\src\core\agent.c
E28966
v_dialer\dialer\src\core\operator.c
E28967
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\core\screen.c
E28968
v_dialer\dialer\src\core\operator.c
E28969
v_dialer\dialer\src\core\agent_pvrs_util.c
E28970
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\operator.c
E28971
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\oper_pvrs.c
v_dialer\dialer\src\core\screen.c
E28972
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\oper_pvrs.c
v_dialer\dialer\src\core\screen.c
E28973
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\oper_pvrs.c
v_dialer\dialer\src\core\screen.c
E28974
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\screen.c
E28975
v_dialer\dialer\src\core\screen.c
E28976
v_dialer\dialer\src\core\screen.c
E28977
v_dialer\dialer\src\core\operator.c
E28978
v_dialer\dialer\src\core\operator.c
Maintenance and Troubleshooting Guide
March 2008
215
E28979
v_dialer\dialer\src\core\screen.c
E28980
v_dialer\dialer\src\core\screen.c
E28981
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
E28982
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
E28983
v_dialer\dialer\src\core\agent.c
E28984
v_dialer\dialer\src\core\agent.c
E29000
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\api_jobctl.c
E29001
v_dialer\dialer\src\core\api_jobctl.c
E29002
v_dialer\dialer\src\core\api_jobctl.c
E29006
v_dialer\dialer\src\core\api_jobctl.c
E29007
E29008
216
E29009
v_dialer\dialer\src\core\api_jobctl.c
E29010
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\joblib.c
E29011
v_dialer\dialer\src\core\api_jobctl.c
E29012
v_dialer\dialer\src\core\api_jobctl.c
E29014
v_dialer\dialer\src\core\api_jobctl.c
E29015
v_dialer\dialer\src\core\api_jobctl.c
E29016
v_dialer\dialer\src\core\api_jobctl.c
E29017
v_dialer\dialer\src\core\api_jobctl.c
E29018
v_dialer\dialer\src\core\api_jobctl.c
E29019
v_dialer\dialer\src\core\joblib.c
E29020
v_dialer\dialer\src\core\api_jobctl.c
E29021
v_dialer\dialer\src\core\api_jobctl.c
E29022
v_dialer\dialer\src\core\api_jobctl.c
E29023
v_dialer\dialer\src\core\api_jobctl.c
Maintenance and Troubleshooting Guide
March 2008
E29024
v_dialer\dialer\src\core\api_jobctl.c
E29025
v_dialer\dialer\src\core\api_jobctl.c
E29026
v_dialer\dialer\src\core\api_jobctl.c
E29027
v_dialer\dialer\src\core\api_jobctl.c
E29028
v_dialer\dialer\src\core\api_jobctl.c
E29029
v_dialer\dialer\src\core\api_jobctl.c
E29030
v_dialer\dialer\src\core\api_jobctl.c
E29031
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E29032
v_dialer\dialer\src\core\api_jobctl.c
E29033-E2903
5
E29036
v_dialer\dialer\src\core\joblib.c
E29037
v_dialer\dialer\src\core\joblib.c
E29038
v_dialer\dialer\src\core\joblib.c
E29039
E29040
v_dialer\dialer\src\core\api_jobctl.c
E29041
E29042
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\iicb_conf.c
E29043
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\iicb_conf.c
E29044
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\iicb_conf.c
E29045
v_dialer\dialer\src\core\iicb_conf.c
E29046
v_dialer\dialer\src\core\iicb_conf.c
E29047
v_dialer\dialer\src\core\iicb_conf.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E29048
v_dialer\dialer\src\core\iicb_conf.c
E29049
v_dialer\dialer\src\core\iicb_conf.c
Maintenance and Troubleshooting Guide
March 2008
217
E29050
v_dialer\dialer\src\core\iicb_conf.c
E29051
v_dialer\dialer\src\core\install_ext.c
E29052
v_dialer\dialer\src\core\install_ext.c
E29053
v_dialer\dialer\src\core\install_ext.c
E29054
v_dialer\dialer\src\core\install_ext.c
E29055
v_dialer\dialer\src\core\install_ext.c
E29056
v_dialer\dialer\src\core\api_jobctl.c
E29057
v_dialer\dialer\src\core\api_jobctl.c
E29150
v_dialer\dialer\src\core\beeper.c
E29151
v_dialer\dialer\src\core\beeper.c
E29152
v_dialer\dialer\src\core\beeper.c
E29153
v_dialer\dialer\src\core\beeper.c
E29154
v_dialer\dialer\src\core\beeper.c
E29200
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\core\agent_tdss_util.c
E29201
E29202
218
Maintenance and Troubleshooting Guide
March 2008
E29203
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\beeper.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\operator.c
v_dialer\ivr\src\ivr_config.c
v_dialer\ivr\src\ivr_conn.c
v_dialer\dialer\src\utility\mem_dump.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\core\recall_rmp.c
v_dialer\dialer\src\utility\shmon.c
E29204
v_dialer\dialer\src\core\conn_mgr.c
E29205
v_dialer\dialer\src\core\listops.c
E29206
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
E29207
v_dialer\dialer\src\core\screen.c
E29208
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\driver.c
v_dialer\dialer\src\core\msg_loader.c
E29210
v_dialer\dialer\src\core\msg_loader.c
E29212
v_dialer\dialer\src\core\msg_loader.c
E29213
v_dialer\dialer\src\core\msg_loader.c
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
E29214
v_dialer\dialer\src\core\msg_loader.c
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
E29400
v_dialer\dialer\src\core\testmsg.c
E29500
v_dialer\dialer\src\core\ao_recall.c
E29501
v_dialer\dialer\src\core\ao_recall.c
Maintenance and Troubleshooting Guide
March 2008
219
E29502
v_dialer\dialer\src\core\ao_recall.c
E29503
v_dialer\dialer\src\core\ao_recall.c
E29505
v_dialer\dialer\src\core\ao_recall.c
E29600 E29608
220
E29700
v_dialer\dialer\src\core\joblist_ed.c
E29701
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29702
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29703
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29704
v_dialer\dialer\src\core\ld_joblist.c
E29705
v_dialer\dialer\src\core\ld_joblist.c
E29706
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29707
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29708
v_dialer\dialer\src\core\operator.c
E29709
v_dialer\dialer\src\core\joblist_ed.c
E29710
v_dialer\dialer\src\core\ld_joblist.c
E29711
v_dialer\dialer\src\core\ld_joblist.c
E29712
v_dialer\dialer\src\core\ld_joblist.c
E29714
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29715
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29716
v_dialer\dialer\src\core\joblist_ed.c
E29717
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29718
v_dialer\dialer\src\core\ld_joblist.c
Maintenance and Troubleshooting Guide
March 2008
E29719
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
E29800
v_dialer\dialer\src\core\chainhandler.c
E29900
v_dialer\dialer\src\core\job_strter.c
E29901
v_dialer\dialer\src\core\job_strter.c
E29902
v_dialer\dialer\src\core\job_strter.c
E29903
v_dialer\dialer\src\core\job_strter.c
E29904
v_dialer\dialer\src\core\job_strter.c
E29950
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\screen.c
E29951
v_dialer\dialer\src\core\port_hndle.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E30000-E3001
9
E31200
v_dialer\dialer\src\custom\readwrt.c
E31400
v_dialer\dialer\src\custom\atohex.c
E32000
v_dialer\dialer\src\dbconst\readtape.c
E32001
v_dialer\dialer\src\dbconst\readtape.c
E32002
v_dialer\dialer\src\dbconst\readtape.c
E32003
v_dialer\dialer\src\dbconst\readtape.c
E32004
v_dialer\dialer\src\dbconst\readtape.c
E32005
v_dialer\dialer\src\dbconst\readtape.c
E32005
v_dialer\dialer\src\dbconst\readtape.c
E32006
v_dialer\dialer\src\dbconst\readtape.c
E32007
v_dialer\dialer\src\dbconst\readtape.c
E32008
v_dialer\dialer\src\dbconst\readtape.c
E32400
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
Maintenance and Troubleshooting Guide
March 2008
221
E32401
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
E32402
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
E32403
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
E32404
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
E32405
v_dialer\dialer\src\dbconst\readtape.c
E32600
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\DialerCmdCtrl\
VoicemsgCfgTable.cpp
E32601
E32602
v_dialer\dialer\src\dbconst\moj_conv.c
E32603
v_dialer\dialer\src\dbconst\moj_conv.c
E32604
v_dialer\dialer\src\dbconst\moj_conv.c
E32605
v_dialer\dialer\src\dbconst\moj_conv.c
E32606
222
E32607
v_dialer\dialer\src\dbconst\moj_conv.c
E34000
v_dialer\dialer\src\lettergen\formlet.c
E34001
v_dialer\dialer\src\lettergen\formlet.c
E35000
v_dialer\dialer\src\lstextract\ext_data.c
E35001
v_dialer\dialer\src\lstextract\ext_data.c
E35002
v_dialer\dialer\src\lstextract\ext_data.c
E35200
v_dialer\dialer\src\lstextract\ext_list.c
E35201
v_dialer\dialer\src\lstextract\ext_list.c
E36000
v_dialer\dialer\src\dbmaint\record_ed.c
E36001
v_dialer\dialer\src\dbmaint\record_ed.c
E36002
v_dialer\dialer\src\dbmaint\record_ed.c
E36003
v_dialer\dialer\src\dbmaint\record_ed.c
E36004
v_dialer\dialer\src\dbmaint\record_ed.c
Maintenance and Troubleshooting Guide
March 2008
E36005
v_dialer\dialer\src\dbmaint\record_ed.c
E36006
v_dialer\dialer\src\dbmaint\redit_scrn.c
E36101
v_dialer\dialer\src\dbmaint\rec_update.c
E36200
v_dialer\dialer\src\dbmaint\redit_scrn.c
E36201
v_dialer\dialer\src\core\dnc_mark.c
E36202
v_dialer\dialer\src\core\dnc_mark.c
E36203
E37000
v_dialer\admin\src\createop.c
E37001
v_dialer\admin\src\createop.c
E37002
v_dialer\admin\src\createop.c
E37003
v_dialer\admin\src\createop.c
E37004
v_dialer\admin\src\createop.c
E37005
v_dialer\admin\src\createop.c
E37006
v_dialer\admin\src\createop.c
E37007
E37008
v_dialer\admin\src\createop.c
E37009
E37010
v_dialer\admin\src\createop.c
v_dialer\ivr\src\ivr_config.c
E37011
v_dialer\admin\src\createop.c
v_dialer\ivr\src\ivr_config.c
E37012
v_dialer\admin\src\createop.c
E37013
v_dialer\admin\src\createop.c
E37014
v_dialer\admin\src\createop.c
E37015
v_dialer\admin\src\createop.c
E37016
v_dialer\admin\src\createop.c
E37017
v_dialer\admin\src\createop.c
E37018
v_dialer\admin\src\createop.c
E37019
v_dialer\admin\src\createop.c
Maintenance and Troubleshooting Guide
March 2008
223
E37020
v_dialer\admin\src\createop.c
E37021
v_dialer\admin\src\createop.c
E37022
v_dialer\admin\src\createop.c
E37023
v_dialer\admin\src\createop.c
v_dialer\ivr\src\ivr_config.c
E37024
v_dialer\admin\src\createop.c
v_dialer\ivr\src\ivr_config.c
E37025
v_dialer\admin\src\createop.c
E37026
v_dialer\admin\src\createop.c
E37027
v_dialer\admin\src\createop.c
E37028
v_dialer\admin\src\createop.c
E37029
v_dialer\admin\src\createop.c
E37030
v_dialer\admin\src\createop.c
E37031
v_dialer\admin\src\createop.c
E37032
v_dialer\admin\src\createop.c
E37033
E37034
v_dialer\admin\src\createop.c
E37035
v_dialer\admin\src\createop.c
E37036
v_dialer\admin\src\createop.c
E37037
v_dialer\admin\src\createop.c
E37038
v_dialer\admin\src\createop.c
E37039
E37200
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37201
v_dialer\dialer\src\editor\config_ed.c
E37202
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37203
224
Maintenance and Troubleshooting Guide
March 2008
E37204
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37205
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37206,
E37207
E37208
v_dialer\dialer\src\editor\config_ed.c
E37209,
E37210
E37211
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37212
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37213
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37214
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37215,
E37216
E37217
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37218
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37219
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37220
v_dialer\dialer\src\editor\config_ed.c
E37221
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Maintenance and Troubleshooting Guide
March 2008
225
E37222
v_dialer\dialer\src\editor\config_ed.c
E37223
v_dialer\dialer\src\editor\config_ed.c
E37224
v_dialer\dialer\src\editor\config_ed.c
E37225
v_dialer\dialer\src\editor\config_ed.c
E37226
v_dialer\dialer\src\editor\config_ed.c
E37227
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37228
E37229
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37230
226
E37231
v_dialer\dialer\src\editor\config_ed.c
E37232
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37233
v_dialer\dialer\src\editor\config_ed.c
E37234
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37235
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37236
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37237
v_dialer\dialer\src\editor\config_ed.c
E37238
v_dialer\dialer\src\editor\config_ed.c
E37239
v_dialer\dialer\src\editor\config_ed.c
E37240
v_dialer\dialer\src\editor\config_ed.c
E37241
v_dialer\dialer\src\editor\config_ed.c
E37242
v_dialer\dialer\src\editor\config_ed.c
Maintenance and Troubleshooting Guide
March 2008
E37243
v_dialer\dialer\src\editor\config_ed.c
E37244
v_dialer\dialer\src\editor\config_ed.c
E37245
v_dialer\dialer\src\editor\config_ed.c
E37246
v_dialer\dialer\src\editor\config_ed.c
E37247
v_dialer\dialer\src\editor\config_ed.c
E37248
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37249
v_dialer\dialer\src\editor\config_ed.c
E37250
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37251
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37252
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37253
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37254
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37255
E37256
v_dialer\dialer\src\editor\config_ed.c
E37300
v_dialer\admin\src\termprocess.c
E37301
v_dialer\admin\src\termprocess.c
E37400
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37401
E37402
v_dialer\dialer\src\editor\config_ed.c
E37403
v_dialer\dialer\src\editor\config_ed.c
Maintenance and Troubleshooting Guide
March 2008
227
E37404
v_dialer\dialer\src\editor\config_ed.c
E37405
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37500
v_dialer\admin\src\signalit.c
E37501
v_dialer\admin\src\signalit.c
E37502
v_dialer\admin\src\signalit.c
E37503
v_dialer\admin\src\signalit.c
E37503
v_dialer\dialer\src\utility\agentcount.c
E37600
v_dialer\dialer\src\editor\master_ed.c
E37601
v_dialer\dialer\src\editor\master_ed.c
E37602
v_dialer\dialer\src\editor\master_ed.c
E37603
v_dialer\dialer\src\editor\master_ed.c
E37604
v_dialer\dialer\src\editor\master_ed.c
E37800
v_dialer\admin\src\addgroup.c
E37801
E37802
v_dialer\admin\src\addgroup.c
E38000
v_dialer\dialer\src\markrec\chkentdt.c
E38001
E38002
v_dialer\dialer\src\markrec\chkentdt.c
E38003
v_dialer\dialer\src\markrec\chkentdt.c
E38004
v_dialer\dialer\src\markrec\chkentdt.c
E38400
v_dialer\dialer\src\markrec\latemrk.c
E38401
228
E38402
v_dialer\dialer\src\markrec\latemrk.c
E38403
v_dialer\dialer\src\markrec\latemrk.c
E38404
v_dialer\dialer\src\markrec\latemrk.c
E38405
v_dialer\dialer\src\markrec\latemrk.c
E38406
v_dialer\dialer\src\markrec\latemrk.c
Maintenance and Troubleshooting Guide
March 2008
E38600
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\markrec\set_field.c
E38601
v_dialer\dialer\src\markrec\set_field.c
E38602
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\markrec\set_field.c
E38603
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\markrec\set_field.c
E38604
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\markrec\set_field.c
E38605
v_dialer\dialer\src\markrec\get_field.c
E38800
v_dialer\dialer\src\markrec\latelst.c
E38801
E38802
E39000
E39001
v_dialer\dialer\src\menu\menu.c
E39002
v_dialer\dialer\src\menu\menu.c
E39003
v_dialer\dialer\src\menu\menu.c
E39004
v_dialer\dialer\src\menu\menu.c
E39005
v_dialer\dialer\src\menu\menu.c
E39200
v_dialer\dialer\src\menu\submenu.c
E39201
v_dialer\dialer\src\menu\submenu.c
E39202
v_dialer\dialer\src\menu\submenu.c
E40000
v_dialer\dialer\src\pcextract\brkfile.c
E40001
v_dialer\dialer\src\pcextract\brkfile.c
E40002
v_dialer\dialer\src\pcextract\fileops.c
E40003
v_dialer\dialer\src\pcextract\brkfile.c
E40200
v_dialer\dialer\src\pcextract\fileops.c
E40201
v_dialer\dialer\src\pcextract\fileops.c
E40202
v_dialer\dialer\src\pcextract\fileops.c
E40203
v_dialer\dialer\src\pcextract\fileops.c
Maintenance and Troubleshooting Guide
File <filename> does not exist
March 2008
229
E40204
v_dialer\dialer\src\pcextract\fileops.c
E40400
v_dialer\dialer\src\pcextract\msetup.c
E40401
v_dialer\dialer\src\pcextract\msetup.c
E42000
v_dialer\dialer\src\preprocess\de_reject.c
E42100
v_dialer\dialer\src\preprocess\ij_merge.c
E42101
v_dialer\dialer\src\preprocess\ij_merge.c
E42400
v_dialer\dialer\src\preprocess\clhashin.c
E42401
E42402
v_dialer\dialer\src\preprocess\clhashin.c
E42403
v_dialer\dialer\src\preprocess\clhashin.c
E42404
v_dialer\dialer\src\preprocess\clhashin.c
E42405
v_dialer\dialer\src\preprocess\clhashin.c
E42406
v_dialer\dialer\src\preprocess\clhashin.c
E42600-42617
E42800
E42801
v_dialer\dialer\src\preprocess\setzones.c
E43000
v_dialer\dialer\src\preprocess\update_cl.c
E43001
v_dialer\dialer\src\preprocess\update_cl.c
E43002
v_dialer\dialer\src\preprocess\update_cl.c
E43200
E43201
230
E43400
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
E43401
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
Maintenance and Troubleshooting Guide
March 2008
E43402
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
E43403
v_dialer\dialer\src\preprocess\
update_upl.c
E43404
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\
update_upl.c
E43405
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
E43406
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
E43407
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\
update_upl.c
E43408
v_dialer\dialer\src\preprocess\update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
E43500
v_dialer\dialer\src\preprocess\msgmap.c
E43501
v_dialer\dialer\src\preprocess\msgmap.c
E43502
v_dialer\dialer\src\preprocess\msgmap.c
E43503
v_dialer\dialer\src\preprocess\msgmap.c
E43504
v_dialer\dialer\src\preprocess\msgmap.c
E43505
v_dialer\dialer\src\preprocess\msgmap.c
E43506
v_dialer\dialer\src\preprocess\msgmap.c
E43507
v_dialer\dialer\src\preprocess\msgmap.c
E43508
E43509
v_dialer\dialer\src\preprocess\msgmap.c
E43510
v_dialer\dialer\src\preprocess\msgmap.c
E43511
v_dialer\dialer\src\preprocess\msgmap.c
Maintenance and Troubleshooting Guide
March 2008
231
E43512
v_dialer\dialer\src\preprocess\msgmap.c
E44000
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44001
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44002
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44003
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44004
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44005
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44006
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44007
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44008
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44009
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44010
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44011
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44012
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44013
v_dialer\dialer\src\reports\history\
hist_rpt.c
E44014
v_dialer\dialer\src\reports\history\
hist_rpt.c
E45000
E45001
v_dialer\dialer\src\reports\rpt_mgr\
rpt_view.c
E45200,
E45201
232
Maintenance and Troubleshooting Guide
March 2008
E45202
v_dialer\dialer\src\reports\rpt_mgr\
pds_view.c
E46200
v_dialer\dialer\src\reports\reportgen\
reportexp.c
v_dialer\dialer\src\reports\reportgen\
reportsub.c
E46201
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46202
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46203
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46204
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46205
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46206
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46207
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46208
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46209
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46210
v_dialer\dialer\src\reports\reportgen\
reportexp.c
v_dialer\dialer\src\reports\reportgen\
reportsub.c
v_dialer\dialer\src\reports\reportgen\
reportsel.c
v_dialer\dialer\src\reports\reportgen\
reportprn.c
E46211
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46212
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46213
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Maintenance and Troubleshooting Guide
March 2008
233
234
E46214
v_dialer\dialer\src\reports\reportgen\
reportexp.c
E46400
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46401
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46402
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46403
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46404
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46405
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46406
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46407
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46408
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46409
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46410
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46411
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46412
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
E46600
v_dialer\dialer\src\reports\reportgen\
reporthlp.c
E46601
v_dialer\dialer\src\reports\reportgen\
reporthlp.c
E46602
v_dialer\dialer\src\reports\reportgen\
reporthlp.c
E46603
v_dialer\dialer\src\reports\reportgen\
reportinit.c
E46800
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Maintenance and Troubleshooting Guide
March 2008
E46801
v_dialer\dialer\src\reports\reportgen\
reportinit.c
E46802
v_dialer\dialer\src\reports\reportgen\
reportinit.c
E46803
v_dialer\dialer\src\reports\reportgen\
reportinit.c
E46804
v_dialer\dialer\src\reports\reportgen\
reportinit.c
E46805
v_dialer\dialer\src\reports\reportgen\
reportinit.c
E46806
v_dialer\dialer\src\reports\reportgen\
reportinit.c
E46807
v_dialer\dialer\src\reports\rptgen\
reportconvert.c
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\reports\reportgen\
reportconvert_prev.c
E46808
v_dialer\dialer\src\reports\rptgen\
reportconvert.c
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\reports\reportgen\
reportconvert_prev.c
E46809
v_dialer\dialer\src\reports\reportgen\
reportinit.c
E46810
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\reports\reportgen\
reportconvert_prev.c
v_dialer\dialer\src\reports\rptgen\
reportconvert.c
E46811
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\reports\reportgen\
reportconvert_prev.c
v_dialer\dialer\src\reports\rptgen\
reportconvert.c
E47000
E47001
v_dialer\dialer\src\scrnbld\scrnbld.c
Maintenance and Troubleshooting Guide
March 2008
235
E47002
v_dialer\dialer\src\scrnbld\scrnbld.c
E47003
v_dialer\dialer\src\scrnbld\scrnbld.c
E47004
v_dialer\dialer\src\scrnbld\scrnbld.c
E47005
v_dialer\dialer\src\scrnbld\scrnbld.c
E47006
v_dialer\dialer\src\scrnbld\scrnbld.c
E47007
v_dialer\dialer\src\scrnbld\scrnbld.c
E47008
v_dialer\dialer\src\scrnbld\scrnbld.c
E47009
v_dialer\dialer\src\scrnbld\scrnbld.c
E47010
v_dialer\dialer\src\scrnbld\scrnbld.c
E47011
E47012
v_dialer\dialer\src\scrnbld\scrnbld.c
E47013
v_dialer\dialer\src\scrnbld\scrnbld.c
E47014
v_dialer\dialer\src\scrnbld\scrnbld.c
E47015
v_dialer\dialer\src\scrnbld\scrnbld.c
E47016-E4701
8
E47019
v_dialer\dialer\src\scrnbld\sbld_block.c
E47020
v_dialer\dialer\src\scrnbld\sbld_block.c
E47021
v_dialer\dialer\src\scrnbld\sbld_block.c
E47022
v_dialer\dialer\src\scrnbld\sbld_block.c
E47023
v_dialer\dialer\src\scrnbld\sbld_block.c
E47024
v_dialer\dialer\src\scrnbld\sbld_block.c
E47025
v_dialer\dialer\src\scrnbld\scrnbld.c
E47026
v_dialer\dialer\src\scrnbld\scrnbld.c
E47027
v_dialer\dialer\src\scrnbld\scrnbld.c
E47028
v_dialer\dialer\src\scrnbld\scrnbld.c
E47029
236
E47030
v_dialer\dialer\src\scrnbld\scrnbld.c
E47031
v_dialer\dialer\src\scrnbld\scrnbld.c
Maintenance and Troubleshooting Guide
March 2008
E47032
v_dialer\dialer\src\scrnbld\scrnbld.c
E47033
v_dialer\dialer\src\scrnbld\scrnbld.c
E47034
v_dialer\dialer\src\scrnbld\scrnbld.c
E47035
v_dialer\dialer\src\scrnbld\sbld_block.c
E47036
v_dialer\dialer\src\scrnbld\sbld_block.c
E47037
v_dialer\dialer\src\scrnbld\sbld_block.c
E47038
v_dialer\dialer\src\scrnbld\scrnbld.c
E47039
v_dialer\dialer\src\scrnbld\scrnbld.c
E47040
v_dialer\dialer\src\scrnbld\scrnbld.c
E47041
E49001
v_dialer\library\libcpp\src\Passwd.cpp
E50000
v_dialer\dialer\src\utility\adump.c
E50100
v_dialer\dialer\src\utility\agentcheck.c
v_dialer\dialer\src\core\agent_misc_util.c
E50101
v_dialer\dialer\src\utility\agentcheck.c
E50200
v_dialer\dialer\src\utility\datetime.c
E50201
v_dialer\dialer\src\utility\datetime.c
E50202
v_dialer\dialer\src\utility\datetime.c
E50203
v_dialer\dialer\src\utility\datetime.c
E50204
v_dialer\dialer\src\utility\datetime.c
E50205
v_dialer\dialer\src\utility\datetime.c
E50206
v_dialer\dialer\src\utility\datetime.c
E50600
v_dialer\dialer\src\utility\enq_pty.c
E50601
v_dialer\dialer\src\utility\enq_pty.c
E50602
v_dialer\dialer\src\utility\enq_pty.c
E50603
v_dialer\dialer\src\utility\enq_pty.c
E50604
v_dialer\dialer\src\utility\enq_pty.c
E50605
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
Maintenance and Troubleshooting Guide
March 2008
237
E50606-E5060
8
E50609
v_dialer\dialer\src\utility\enq_pty.c
E50610
E50611
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\utility\enq_pty.c
E50612
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\utility\enq_pty.c
E50613
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\utility\enq_pty.c
E50800
E51001
v_dialer\dialer\src\utility\fdictdump.c
E51200
v_dialer\dialer\src\utility\jobkeys.c
E51201
E51400
238
E51600
v_dialer\dialer\src\utility\portcorr.c
E51601
v_dialer\dialer\src\utility\portcorr.c
E52800
v_dialer\dialer\src\utility\ziptoarea.c
E52801
v_dialer\dialer\src\utility\ziptoarea.c
E52802
v_dialer\dialer\src\utility\ziptoarea.c
E52803
v_dialer\dialer\src\utility\ziptoarea.c
E52804
v_dialer\dialer\src\utility\ziptoarea.c
E52805
v_dialer\dialer\src\utility\ziptoarea.c
E52806
v_dialer\dialer\src\utility\ziptoarea.c
E53000
v_dialer\dialer\src\utility\copyfields.c
E53001
v_dialer\dialer\src\utility\copyfields.c
E53002
v_dialer\dialer\src\utility\copyfields.c
E53003
v_dialer\dialer\src\utility\copyfields.c
Maintenance and Troubleshooting Guide
March 2008
E53004
v_dialer\dialer\src\utility\copyfields.c
E53005
v_dialer\dialer\src\utility\copyfields.c
E53006
v_dialer\dialer\src\utility\copyfields.c
E53007
v_dialer\dialer\src\utility\copyfields.c
E53008
v_dialer\dialer\src\utility\copyfields.c
E53009
v_dialer\dialer\src\utility\copyfields.c
E53010
v_dialer\dialer\src\utility\copyfields.c
E53011
v_dialer\dialer\src\utility\copyfields.c
E53012
v_dialer\dialer\src\utility\copyfields.c
E53013
v_dialer\dialer\src\utility\copyfields.c
E53014
v_dialer\dialer\src\utility\copyfields.c
E53015
v_dialer\dialer\src\utility\copyfields.c
E53016
v_dialer\dialer\src\utility\copyfields.c
E53017
v_dialer\dialer\src\utility\copyfields.c
E53018
E53019
v_dialer\dialer\src\utility\copyfields.c
E53020
v_dialer\dialer\src\utility\copyfields.c
E53021
v_dialer\dialer\src\utility\copyfields.c
E53022
v_dialer\dialer\src\utility\copyfields.c
E53023
v_dialer\dialer\src\utility\copyfields.c
E53650
v_dialer\dialer\src\imon\internetmon.c
E53651
v_dialer\dialer\src\imon\internetmon.c
E53652
v_dialer\dialer\src\imon\internetmon.c
E53654
v_dialer\dialer\src\imon\internetmon.c
E53655
E53800
v_dialer\dialer\src\utility\evmon.c
E53801
v_dialer\dialer\src\utility\evmon.c
E53802
v_dialer\dialer\src\utility\evmon.c
E53803
v_dialer\library\libdsi\src\script_lng.c
Maintenance and Troubleshooting Guide
March 2008
239
E53804
v_dialer\dialer\src\utility\evmon.c
E53805
v_dialer\dialer\src\utility\evmon.c
E53806
v_dialer\dialer\src\utility\evmon.c
E53807
v_dialer\dialer\src\utility\evmon.c
E53808
v_dialer\library\libdsi\src\script_lng.c
E53809
v_dialer\dialer\src\utility\evmon.c
E53810
v_dialer\dialer\src\utility\evmon.c
E53811
v_dialer\dialer\src\utility\evmon.c
E53812
E53813
v_dialer\dialer\src\utility\evmon.c
E53814
v_dialer\dialer\src\utility\evmon.c
E53815
v_dialer\dialer\src\utility\evmon.c
E53816
v_dialer\dialer\src\utility\evmon.c
E53817
v_dialer\dialer\src\utility\evmon.c
E53818
v_dialer\dialer\src\utility\evmon.c
E53819
v_dialer\dialer\src\utility\evmon.c
E54100
v_dialer\dialer\src\listserver\listserver.c
E54101
v_dialer\dialer\src\listserver\listserver.c
E54102
v_dialer\dialer\src\listserver\listserver.c
E54103
v_dialer\dialer\src\listserver\listserver.c
E54104
v_dialer\dialer\src\listserver\listserver.c
E54105
v_dialer\dialer\src\listserver\listserver.c
E54106
v_dialer\dialer\src\listserver\listserver.c
E54107
v_dialer\dialer\src\listserver\listserver.c
E54108
240
E54109
v_dialer\dialer\src\listserver\listserver.c
E54110
v_dialer\dialer\src\listserver\listserver.c
E54111
v_dialer\dialer\src\listserver\listserver.c
E54112
v_dialer\library\libdsi\src\clutils.c
Maintenance and Troubleshooting Guide
March 2008
E54113
v_dialer\dialer\src\listserver\listserver.c
E54114
v_dialer\dialer\src\listserver\listserver.c
E54115
v_dialer\dialer\src\listserver\listserver.c
E54120
v_dialer\dialer\src\listserver\listserver.c
v_dialer\dialer\DialerCmdCtrl\
VoicemsgCfgTable.cpp
E54121
v_dialer\dialer\src\listserver\listserver.c
E55000
v_dialer\dialer\src\reports\reportgen\
reportprn.c
E55001
v_dialer\dialer\src\reports\reportgen\
reportprn.c
E55002
v_dialer\dialer\src\reports\reportgen\
reportprn.c
E55200
v_dialer\dialer\src\reports\reportgen\
reportsel.c
E55201
v_dialer\dialer\src\reports\reportgen\
reportsel.c
E55202
v_dialer\dialer\src\reports\reportgen\
reportsel.c
E55203
v_dialer\dialer\src\reports\reportgen\
reportsel.c
E55204
v_dialer\dialer\src\reports\reportgen\
reportsel.c
E55205
v_dialer\dialer\src\reports\reportgen\
reportsel.c
E55206
v_dialer\dialer\src\reports\reportgen\
reportsel.c
E55207
v_dialer\dialer\src\reports\reportgen\
reportsel.c
E55400
v_dialer\dialer\src\reports\reportgen\
reportsub.c
Maintenance and Troubleshooting Guide
March 2008
241
242
E55600
v_dialer\dialer\src\reports\reportgen\
reportexp.c
v_dialer\dialer\src\reports\reportgen\
reportsel.c
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
v_dialer\dialer\src\reports\reportgen\
reporthlp.c
E55601
v_dialer\dialer\src\reports\reportgen\
reportsub.c
v_dialer\ivr\src\ivr_supr.c
E56001
v_dialer\ivr\src\ivr_supr.c
E56002
v_dialer\ivr\src\ivr_supr.c
E56003
v_dialer\ivr\src\ivr_supr.c
E56004
v_dialer\ivr\src\ivr_config.c
E56005
v_dialer\ivr\src\ivr_config.c
E56006
v_dialer\ivr\src\ivr_config.c
E56007
v_dialer\ivr\src\ivr_config.c
E56008
v_dialer\ivr\src\ivr_config.c
E56009
v_dialer\ivr\src\ivr_config.c
E56010
v_dialer\ivr\src\ivr_config.c
E56011
v_dialer\ivr\src\ivr_config.c
E56012
v_dialer\ivr\src\ivr_config.c
E56013
v_dialer\ivr\src\ivr_config.c
E56014
v_dialer\ivr\src\ivr_config.c
E56015
v_dialer\ivr\src\ivr_config.c
E56016
v_dialer\ivr\src\ivr_config.c
E56017
v_dialer\ivr\src\ivr_config.c
E56018
v_dialer\ivr\src\ivr_config.c
E56019
v_dialer\ivr\src\ivr_config.c
E56020
v_dialer\ivr\src\ivr_conn.c
E56021
v_dialer\ivr\src\ivr_conn.c
Maintenance and Troubleshooting Guide
March 2008
E56022
v_dialer\ivr\src\ivr_conn.c
E56023
v_dialer\ivr\src\ivr_conn.c
E56024
v_dialer\ivr\src\ivr_conn.c
E56025
v_dialer\ivr\src\ivr_conn.c
E56026
v_dialer\ivr\src\ivr_conn.c
E56027
v_dialer\ivr\src\ivr_conn.c
E56028
v_dialer\ivr\src\ivr_conn.c
E56029
v_dialer\ivr\src\ivr_conn.c
E56030
v_dialer\ivr\src\ivr_conn.c
E56031
E56032
v_dialer\ivr\src\ivr_conn.c
E56033
v_dialer\ivr\src\ivr_conn.c
E56034
v_dialer\ivr\src\ivr_conn.c
E56035
v_dialer\ivr\src\ivr_conn.c
E56036
v_dialer\ivr\src\ivr_conn.c
E56037
v_dialer\ivr\src\ivr_conn_io.c
E56038
v_dialer\ivr\src\ivr_conn_io.c
E56039
v_dialer\ivr\src\ivr_conn_io.c
E56040
v_dialer\ivr\src\ivr_conn_io.c
E56041
v_dialer\ivr\src\ivr_conn_io.c
E56042
v_dialer\ivr\src\ivr_conn_io.c
E56043
v_dialer\ivr\src\ivr_conn_io.c
E56044
v_dialer\ivr\src\ivr_conn.c
E56045
v_dialer\ivr\src\ivr_conn.c
E56046
v_dialer\ivr\src\ivr_conn.c
E56047
v_dialer\ivr\src\ivr_conn.c
E56048
v_dialer\ivr\src\ivr_conn.c
E56049
v_dialer\ivr\src\ivr_conn.c
E57000
v_dailer\dialer\dispatcher\dunupinit.c
Maintenance and Troubleshooting Guide
March 2008
243
E57001
v_dailer\dialer\dispatcher\dunupinit.c
E57002
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\agent_time_util.c
v_dialer\dialer\src\core\operator.c
v_dailer\dialer\dispatcher\dunupinit.c
v_dialer\dialer\src\swif\exec\opmon.c
E57003
244
E57004
v_dailer\dialer\dispatcher\dunupinit.c
E57005
v_dailer\dialer\dispatcher\dunupinit.c
E57006
v_dailer\dialer\dispatcher\dunupinit.c
E57007
v_dailer\dialer\dispatcher\dunupinit.c
E57008
v_dailer\dialer\dispatcher\dunupinit.c
v_dailer\dialer\dispatcher\
mp_change_groupid.c
v_dailer\dialer\dispatcher\pa_acd_perm.c
v_dailer\dialer\dispatcher\snd_agt_msg.c
v_dailer\dialer\dispatcher\gateway.c
E57009
v_dailer\dialer\dispatcher\ap_aborting.c
v_dailer\dialer\dispatcher\ap_acquiring.c
v_dailer\dialer\dispatcher\
ap_prereleasing.c
v_dailer\dialer\dispatcher\ap_releasing.c
v_dailer\dialer\dispatcher\dunupinit.c
v_dailer\dialer\dispatcher\
mp_change_groupid.c
v_dailer\dialer\dispatcher\mp_job_set.c
v_dailer\dialer\dispatcher\pa_acd_perm.c
v_dailer\dialer\dispatcher\snd_agt_msg.c
v_dailer\dialer\dispatcher\dunup.c
v_dailer\dialer\dispatcher\gateway.c
E57010
v_dailer\dialer\dispatcher\dunupinit.c
v_dailer\dialer\dispatcher\mp_login.c
E57011
v_dailer\dialer\dispatcher\dunup.c
E57012
v_dailer\dialer\dispatcher\dunup.c
E57013
v_dailer\dialer\dispatcher\dunup.c
Maintenance and Troubleshooting Guide
March 2008
E57014
v_dailer\dialer\dispatcher\
action_processor.c
E57015
v_dailer\dialer\dispatcher\du_format.c
v_dailer\dialer\dispatcher\
mp_genrel_query.c
v_dailer\dialer\dispatcher\
mp_op_headset_state.c
v_dailer\dialer\dispatcher\
mp_op_link_failure.c
v_dailer\dialer\dispatcher\mp_response.c
E57016
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\agent_time_util.c
v_dialer\dialer\src\core\operator.c
v_dailer\dialer\dispatcher\dunupinit.c
v_dailer\dialer\dispatcher\genrel_util.c
v_dailer\dialer\dispatcher\
mp_acquire_op.c
v_dailer\dialer\dispatcher\
mp_call_connect.c
v_dailer\dialer\dispatcher\mp_login.c
v_dialer\dialer\src\swif\exec\opmon.c
E57017
v_dailer\dialer\dispatcher\dunuputil.c
E57018
v_dailer\dialer\dispatcher\
event_processor.c
v_dailer\dialer\dispatcher\mp_call_event.c
E57019
v_dailer\dialer\dispatcher\gateway.c
v_dialer\dialer\src\swif\exec\
ServMonMsg.cpp
E57020
v_dailer\dialer\dispatcher\
mp_acquire_op.c
E57021
v_dailer\dialer\dispatcher\
mp_acquire_op.c
Maintenance and Troubleshooting Guide
March 2008
245
E57022
v_dailer\dialer\dispatcher\
mp_call_connect.c
v_dailer\dialer\dispatcher\mp_call_event.c
v_dailer\dialer\dispatcher\
mp_change_groupid.c
v_dailer\dialer\dispatcher\
mp_create_call.c
v_dailer\dialer\dispatcher\
mp_domain_action.c
v_dailer\dialer\dispatcher\mp_job_set.c
v_dailer\dialer\dispatcher\mp_login.c
v_dailer\dialer\dispatcher\mp_logout.c
v_dailer\dialer\dispatcher\
mp_trunk_release.c
v_dailer\dialer\dispatcher\
mp_user_action.c
E57023
246
E57024
v_dailer\dialer\dispatcher\mp_call_made.c
E57025
v_dailer\dialer\dispatcher\mp_response.c
E57026
v_dailer\dialer\dispatcher\mp_call_reject.c
v_dailer\dialer\dispatcher\mp_job_set.c
E57027
v_dailer\dialer\dispatcher\
mp_create_call.c
E57028
v_dailer\dialer\dispatcher\
mp_domain_action.c
v_dailer\dialer\dispatcher\
mp_user_action.c
E57029
v_dailer\dialer\dispatcher\mp_job_set.c
E57030
v_dailer\dialer\dispatcher\mp_login.c
E57031
v_dailer\dialer\dispatcher\mp_response.c
E57032
v_dailer\dialer\dispatcher\mp_response.c
E57033
v_dailer\dialer\dispatcher\mp_response.c
E57034
v_dialer\dialer\src\core\agent_misc_util.c
v_dailer\dialer\dispatcher\mp_timeout.c
E57035
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\agent_time_util.c
v_dailer\dialer\dispatcher\mp_timeout.c
Maintenance and Troubleshooting Guide
March 2008
E57036
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\agent_time_util.c
v_dailer\dialer\dispatcher\mp_timeout.c
E57037
E57038
v_dailer\dialer\dispatcher\mp_login.c
E57039
v_dailer\dialer\dispatcher\
mp_call_connect.c
E57040
v_dailer\dialer\dispatcher\mp_call_made.c
E57041
v_dailer\dialer\dispatcher\mp_release.c
E57042
v_dailer\dialer\dispatcher\mp_login.c
E57043
v_dailer\dialer\dispatcher\
mp_user_action.c
E57044
v_dailer\dialer\dispatcher\dunupinit.c
E58002
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\reports\history\
datamgr_init.cpp
v_dialer\dialer\src\swif\exec\
ServMonMsg.cpp
v_dialer\dialer\services\
srcEventServer.cpp
v_dialer\dialer\src\swif\exec\opmon.c
v_dialer\dialer\src\core\porter.c
E59500
v_dialer\dialer\src\core\jobctrl.c
E59501
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
E59502
E59503
v_dialer\dialer\src\core\jobctrl.c
E59505
v_dialer\dialer\src\core\jobctrl.c
E59506
v_dialer\dialer\src\core\jobctrl.c
E59507
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Maintenance and Troubleshooting Guide
March 2008
247
E59508
v_dialer\dialer\src\core\jobctrl.c
E59508
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E59509
v_dialer\dialer\src\core\jobctrl.c
E59510
v_dialer\dialer\src\core\jobctrl.c
E59511
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E59512
v_dialer\dialer\src\core\jobctrl.c
E59513
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E59514
v_dialer\dialer\src\core\jobctrl.c
E59516
v_dialer\dialer\src\core\jobctrl.c
E59517
v_dialer\dialer\src\core\jobctrl.c
E59518
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E59519
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\jobctrl.c
E59520
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E59521
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E59522
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E59527
v_dialer\dialer\src\core\jobctrl.c
E59528
v_dialer\dialer\src\core\jobctrl.c
E59530
v_dialer\dialer\src\core\jobctrl.c
E59531
248
E59533
v_dialer\dialer\src\core\jobctrl.c
E59534
v_dialer\dialer\src\core\jobctrl.c
Maintenance and Troubleshooting Guide
March 2008
E59535
v_dialer\dialer\src\core\jobctrl.c
E59539
v_dialer\dialer\src\core\jobctrl.c
E59540
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
E59541
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
E59542
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
E59596
v_dialer\dialer\src\core\jobctrl.c
E59597
v_dialer\dialer\src\core\jobctrl.c
E59598
v_dialer\dialer\src\core\jobctrl.c
E59599
v_dialer\dialer\src\core\jobctrl.c
E59600
v_dialer\dialer\src\core\jobctrl.c
E61000
midtier\unixdev\CmdCtrl\src\
DialerCfgClient.cpp
Maintenance and Troubleshooting Guide
March 2008
249
250
E61001
midtier\unixdev\RealTimeDataServer\src\
RTRMmain.cpp
midtier\unixdevv_dialer\dialer\services\
src\Init.cpp
v_dialer\dialer\services\
srcEventServiceIF_i.cpp
midtier\unixdev\CmdCtrl\src\
DialerCfgClient.cpp
midtier\unixdev\Logger\src\
LoggingServer_i.cpp
midtier\unixdev\ServiceActivation\src\
ServiceActivatingIFImpl.cxx
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceMonitoringIFImpl.
cxx
midtier\unixdevv_dialer\dialer\services\
src\DialerEventServerIF_i.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventClient.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventServer.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventServiceIF_i.cpp
midtier\unixdev\SysHealth\src\
SystemHealthEntryImpl.cpp
v_dialer\dialer\DialerServiceActivation\src\
DSAServiceIFImpl.cxx
\DSHdialerSystemHealthEntryImpl.cpp
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitoringIFImpl.cxx
E61002
midtier\unixdevv_dialer\dialer\services\
src\EventServiceIF_i.cpp
v_dialer\dialer\services\
srcEventServiceIF_i.cpp
Maintenance and Troubleshooting Guide
March 2008
E61003
midtier\unixdev\CmdCtrl\src\
DialerCfgClient.cpp
midtier\unixdev\RealTimeDataServer\src\
RTRMmain.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventClient.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventServer.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventServiceIF_i.cpp
midtier\unixdevv_dialer\dialer\services\
src\Init.cpp
v_dialer\dialer\services\
srcEventServiceIF_i.cpp
E61004
midtier\unixdev\services\src\Init.cpp
E61005
midtier\unixdev\services\src\Init.cpp
E61006
midtier\unixdev\services\src\Init.cpp
E61007
midtier\unixdev\services\src\
EventServer.cpp
E61008
midtier\unixdev\services\src\
ShmDataReader.cpp
E61009
E61040
midtier\unixdev\services\src\Init.cpp
E61041
midtier\unixdev\services\src\Init.cpp
E61042
midtier\unixdev\services\src\Init.cpp
E61043
midtier\unixdev\services\src\Init.cpp
E62000
v_dialer\dialer\DialerCmdCtrl\src\
CmdCtrl_Table_i.cpp
E62001
dialer\Cmdctrl\CCompcodeTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CConfigTableSO.cpp
E62002
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
v_dialer\dialer\DialerCmdCtrl\
CTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
FileTable.cpp
Maintenance and Troubleshooting Guide
March 2008
251
252
E62003
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
E62004
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
FileTable.cpp
v_dialer\dialer\DialerCmdCtrl\SelData.cpp
v_dialer\dialer\DialerCmdCtrl\
StratData.cpp
E62005
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CompcodeTable.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock_utest.cpp
E62006
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
E62007
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
E62008
v_dialer\dialer\DialerCmdCtrl\
CompcodeData.cpp
v_dialer\dialer\DialerCmdCtrl\JobData.cpp
v_dialer\dialer\DialerCmdCtrl\
PromptData.cpp
v_dialer\dialer\DialerCmdCtrl\SelData.cpp
v_dialer\dialer\DialerCmdCtrl\
StratData.cpp
E62009
v_dialer\dialer\DialerCmdCtrl\
CompcodeData.cpp
Maintenance and Troubleshooting Guide
March 2008
E62010
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallListTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CConfigTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CLineGrpTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
E62011
v_dialer\dialer\DialerCmdCtrl\
CConfigTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CLineGrpTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CodeDescTable.cpp
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
v_dialer\dialer\DialerCmdCtrl\
TelephnyTable.cpp
v_dialer\dialer\DialerCmdCtrl\
VoicemsgCfgTable.cpp
E62012
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
E62013
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
v_dialer\dialer\DialerCmdCtrl\
CCompcodeTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
FileTable.cpp
E62014
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
E62015
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
Maintenance and Troubleshooting Guide
March 2008
253
254
E62016
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
E62017
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
E62018
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
E62019
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
E62020
v_dialer\dialer\DialerCmdCtrl\
CrudulMethods.cpp
v_dialer\dialer\DialerCmdCtrl_Agent_i.cpp
v_dialer\dialer\
DialerCmdCtrl_CallSelect_i.cpp
v_dialer\dialer\DialerCmdCtrl
v_dialer\dialer\
DialerCmdCtrl_CallStrategy_i.cpp
v_dialer\dialer\DialerCmdCtrl
v_dialer\dialer\
DialerCmdCtrl_Compcode_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Config_i.cpp
v_dialer\dialer\
DialerCmdCtrl_DialerControl_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Domain_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Headset_i.cpp
v_dialer\dialer\DialerCmdCtrl_Ivr_i.cpp
v_dialer\dialer\DialerCmdCtrl_Job_i.cpp
v_dialer\dialer\
DialerCmdCtrl_SelectIndex_i.cpp
v_dialer\dialer\
DialerCmdCtrl_TableFactory_i.cpp
E62021
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
E62022
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Maintenance and Troubleshooting Guide
March 2008
E62023
v_dialer\dialer\
DialerCmdCtrl_TableFactory_i.cpp
E62024
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CompcodeTable.cpp
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
v_dialer\dialer\DialerCmdCtrl\
MasterCfgTable.cpp
v_dialer\dialer\DialerCmdCtrl\
TelephnyTable.cpp
v_dialer\dialer\DialerCmdCtrl\
VoicemsgCfgTable.cpp
E62025
v_dialer\library\libutil++\src\account_r.
E62026
v_dialer\library\libutil++\src\account_r.
Maintenance and Troubleshooting Guide
March 2008
255
E62027
v_dialer\dialer\DialerCmdCtrl\
CrudulMethods.cpp
v_dialer\dialer\DialerCmdCtrl_Agent_i.cpp
v_dialer\dialer\DialerCmdCtrl_Blend_i.cpp
v_dialer\dialer\
DialerCmdCtrl_CallSelect_i.cpp
v_dialer\dialer\
DialerCmdCtrl_CallStrategy_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Compcode_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Config_i.cpp
v_dialer\dialer\
DialerCmdCtrl_DialerControl_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Domain_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Headset_i.cpp
v_dialer\dialer\DialerCmdCtrl_Ivr_i.cpp
v_dialer\dialer\DialerCmdCtrl_Job_i.cpp
v_dialer\dialer\
DialerCmdCtrl_SelectIndex_i.cpp
v_dialer\dialer\
DialerCmdCtrl_TableFactory_i.cpp
E62028
E62029
v_dialer\dialer\DialerCmdCtrl\
MsgQueue.cpp
E62030
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
E62031
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
E62032
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCompcodeTableSO.cpp
E62033
v_dialer\dialer\DialerCmdCtrl\
ShmAccess.cpp
E62034
E62035
256
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
Maintenance and Troubleshooting Guide
March 2008
E62036
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62037
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
E62038
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
E62039
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
E62040
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
E62041
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62042
v_dialer\library\libcallsel\src\cllcallsel.cpp
E62043
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
E62044
v_dialer\library\libcallsel\src\cllcallsel.cpp
E62045
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62046
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62047
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62048
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62049
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62050
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
Maintenance and Troubleshooting Guide
March 2008
257
E62051
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
dialerclient\Redwood\VBApps\Editor\
Modules\General.bas
E62052
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cppv_dialer\dialer\
DialerCmdCtrl\CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
v_dialer\dialer\DialerCmdCtrl\
CompcodeTable.cpp
E62053
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CompcodeTable.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
E62054
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62055
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62056
258
E62057
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
E62058
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
E62059
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
E62060
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E62061
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
Maintenance and Troubleshooting Guide
March 2008
E62062
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
E62070
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptSyntaxErrorRe.cpp
E62071
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptSyntaxErrorRe.cpp
E62072
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62073
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62074
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62075
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62076
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62077
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62078
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62079
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Maintenance and Troubleshooting Guide
March 2008
259
260
E62080
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62081
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62082
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62083
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlBase.cpp
E62084
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlBase.cpp
E62085
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlBase.cpp
E62086
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlBase.cpp
E62087
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptTransform.cpp
E62088
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptTransform.cpp
E62089
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptTransform.cpp
Maintenance and Troubleshooting Guide
March 2008
E62090
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlDomErrorHandler.cpp
E62091
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XsltBase.cpp
E62092
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62093
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62094
v_dialer\dialer\DialerCmdCtrl\
SptParserApi.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62095
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62096
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
E62097
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
E62098
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
E62099
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
E62100
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
E62101
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
E62102
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
Maintenance and Troubleshooting Guide
March 2008
261
E62103
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
E62104
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
E62105
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
E62106
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
E62107,
E62108
E62109
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
E62110-E6211
1
E62112
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock_utest.cpp
E62113
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
E62114
262
E63000
midtier\unixdev\CmdCtrl\src\CCTable.cpp
midtier\unixdev\CmdCtrl\src\
CmdCtrlImpl.cpp
E66666 (not in
list)
v_dialer\dialer\src\core\agent.c
Maintenance and Troubleshooting Guide
March 2008
E70000
v_dialer\dialer\src\core\agent_io_util.c
Incorrect number of arguments
E70001
v_dialer\dialer\src\core\agent_io_util.c
Incorrect message type
E70002
v_dialer\dialer\src\core\agent_time_util.c
Timed out waiting for
<message>
E70003
v_dialer\dialer\src\core\agent_misc_util.c
Incorrect job type
E70004
v_dialer\dialer\src\core\agent_misc_util.c
v_dialer\dialer\src\core\agent_sys_util.c
Command failed
E70005
v_dialer\dialer\src\core\agent_io_util.c
Incoming command exceeded
maximum buffer size
E70006
v_dialer\dialer\src\core\agent.c
Must select unit
E70007
v_dialer\dialer\src\core\agent_tdss_util.c
Cannot transfer inbound call
E70008
v_dialer\dialer\src\core\agent_tdss_util.c
Must specify transfer job
E70009
v_dialer\dialer\src\core\agent_tdss_util.c
Unable to send message to
porter
E70010
v_dialer\dialer\src\core\agent_tdss_util.c
Conference in progress
E70011
v_dialer\dialer\src\core\agent_hs_util.c
Call blending is not available
E70012
v_dialer\dialer\src\core\agent_misc_util.c
Password has expired
E70013
v_dialer\dialer\src\core\agent_misc_util.c
Password can not be changed,
change limit not expired
E70015
v_dialer\dialer\src\core\agent_misc_util.c
Unable to become root
privilege for setting password
E70016
v_dialer\dialer\src\core\agent_misc_util.c
Original password is invalid
E70017
v_dialer\dialer\src\core\agent_misc_util.c
New password entered is
invalid
E70018
v_dialer\dialer\src\core\agent.c
IVR_SCRIPT is blank in job
<name>
E70019
v_dialer\dialer\src\core\agent.c
Job <name> is not valid for IVR
agents
E72000
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
E70014
Maintenance and Troubleshooting Guide
March 2008
263
264
E72010
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
E72030
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
E72040
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
E72050
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
E72051
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
E72052
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
E72060
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DSMEvent.cxx
v_dialer\dialer\DialerServiceMonitor\src\
EventReceiver.cxx
v_dialer\dialer\DialerServiceMonitor\src\
SoeEvent.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
E72070
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
Maintenance and Troubleshooting Guide
March 2008
E72080
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
E72090
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
E72100
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
E72110
E72120
v_dialer\dialer\DialerServiceActivation\src\
DSAIFImpl.cxx
E72130
v_dialer\dialer\DialerServiceActivation\src\
DSAIFImpl.cxx
E72140
v_dialer\dialer\DialerServiceActivation\src\
DSAIFImpl.cxx
E72150
v_dialer\dialer\DialerServiceActivation\src\
DSAIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
E72160
v_dialer\dialer\DialerServiceActivation\src\
DSA.cxx
v_dialer\dialer\DialerServiceActivation\src\
DSAIFImpl.cxx
v_dialer\dialer\DialerServiceActivation\src\
DSAServiceIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
EventReceiver.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitoringIFImpl.cxx
E72170
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E72180
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
Maintenance and Troubleshooting Guide
March 2008
265
266
E72190
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E72200
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E72201 (not in
list)
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E72210
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E72220
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E72230
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
E72240
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E72250
v_dialer\dialer\DialerServiceActivation\src\
DSARequest.cxx
E72260
v_dialer\dialer\DialerServiceActivation\src\
DSAServiceIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitoringIFImpl.cxx
E72270
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
E72280
v_dialer\dialer\DialerServiceMonitor\src\\
DialerServiceMonitor.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
E72290
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
E72300
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
Maintenance and Troubleshooting Guide
March 2008
E72310
v_dialer\dialer\DialerServiceMonitor\src\
EventReceiver.cxx
E72320(not in
list)
v_dialer\dialer\DialerServiceMonitor\src\
EventReceiver.cxx
v_dialer\dialer\DialerServiceMonitor\src\
SoeEvent.cxx
Maintenance and Troubleshooting Guide
March 2008
267
268
Maintenance and Troubleshooting Guide
March 2008
Error message text and source file table
The table in this section includes the error messafge number, text, and source files.
Error Numbers
Found in these files
E00000
v_dialer\dialer\src\core\job_strter.c
E00500
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\donotcall.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\enforcer\src\enforcer.cpp
v_dialer\dialer\src\swif\exec\
swid_main.c
v_dialer\dialer\src\core\nuisance.c
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\core\recall_rmp.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\core\switcher.c
v_dialer\dialer\src\dbconst\writetape.c
Maintenance and Troubleshooting Guide
Error message
%s - Caught signal %d (%s)
March 2008
269
E00501
270
v_dialer\admin\src\signalit.c
v_dialer\admin\src\termprocess.c
v_dialer\dialer\src\utility\agentcheck.c
v_dialer\dialer\src\utility\agentcount.c
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\beeper.c
v_dialer\dialer\src\callsel\callconn.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\utility\list_status.c
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
v_dialer\dialer\src\reports\rpt_mgr\
pds_view.c
v_dialer\dialer\src\reports\rpt_mgr\
rpt_view.c
Maintenance and Troubleshooting Guide
%s - Caught signal %d (%s)
and terminated
March 2008
E00502
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\admin\src\createop.c
v_dialer\dialer\src\callsel\cseldmp.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\callsel\call_stgy.c
v_dialer\dialer\src\core\
agent_misc_util.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\jobscrn.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\port_hndle.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
v_dialer\dialer\src\swif\exec\
swid_main.c
v_dialer\dialer\src\lstextract\ext_list.c
v_dialer\dialer\src\preprocess\
ij_merge.c
v_dialer\ivr\src\ivr_config.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\markrec\latemrk.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\editor\master_ed.c
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\postupdate\
postupdate.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\preprocess\
setzones.c
v_dialer\dialer\src\utility\ziptoarea.c
v_dialer\dialer\src\core\screen.c
Maintenance and Troubleshooting Guide
%s - Failed to allocate Memory
March 2008
271
272
E00503
v_dialer\dialer\src\callsel\callconn.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\dbconst\selection.c
v_dialer\dialer\src\reports\history\
hist_rpt.c
v_dialer\dialer\src\lstextract\ext_data.c
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\markrec\set_field.c
v_dialer\dialer\src\menu\submenu.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Pattern error: %s
E00504
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\swif\exec\
swid_main.c
v_dialer\dialer\src\utility\pds_pg.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Bad argument
E00505
v_dialer\dialer\src\markrec\latelst.c
%s - Invalid time format
E00506
v_dialer\dialer\src\markrec\latelst.c
%s - Invalid date format
E00507
v_dialer\dialer\src\listserver\listserver.c
v_dialer\dialer\DialerCmdCtrl\
MasterCfgTable.cpp
v_dialer\dialer\src\utility\port_start.c
%s - Failed to retrieve
environmental variable %s
E00508
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\listserver\listserver.c
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\preprocess\
setzones.c
v_dialer\dialer\src\reports\history\
vrecords.c
%s - Entry %s missing/invalid
in master.cfg file
Maintenance and Troubleshooting Guide
March 2008
E00509
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\preprocess\
msgmap.c
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\src\postupdate\
postupdate.c
v_dialer\dialer\src\dbmaint\rec_update.c
v_dialer\dialer\src\scrnbld\scrnbld.c
v_dialer\dialer\src\markrec\set_field.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\reports\history\
vrecords.c
%s - Entry %s missing/invalid
in %s file
E00510
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\dnc_mark.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\preprocess\
ij_merge.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\preprocess\
setzones.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Entry %s is incompatible
in length
Maintenance and Troubleshooting Guide
March 2008
273
274
E00511
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\dnc_mark.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\preprocess\
ij_merge.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\preprocess\
setzones.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Failed to process file %s
E00512
v_dialer\dialer\DialerCmdCtrl\
DccsVmValidator.cpp
%s - File name %s too long
E00513
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\utility\pds_pg.c
v_dialer\dialer\src\scrnbld\scrnbld.c
%s - Invalid file name %s
E00514
dialer_library\libdsi\src\dispkey.c
dialer_library\libdsi\src\help.c
dialer_library\libui\src\vlui.c
%s - File name %s already
exist
Maintenance and Troubleshooting Guide
March 2008
E00515
v_dialer\admin\src\addgroup.c
v_dialer\dialer\src\utility\adump.c
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\callsel\callconn.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\admin\src\createop.c
v_dialer\dialer\src\callsel\cseldmp.c
v_dialer\dialer\src\core\agent_io_util.c
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\chainhandler.c
v_dialer\dialer\src\core\dnc_mark.c
v_dialer\dialer\src\core\install_ext.c
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\screen.c8
v_dialer\dialer\src\core\transfer.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\pcextract\fileops.c
v_dialer\dialer\src\custom\readwrt.c
v_dialer\dialer\src\utility\portcorr.c
v_dialer\dialer\src\utility\test_help.c
v_dialer\library\libdsi\src\rpt_server.c
v_dialer\dialer\src\swif\exec\opmoncfg.c
v_dialer\dialer\src\utility\edump.c
v_dialer\dialer\src\utility\fdictdump.c
v_dialer\dialer\src\lettergen\formlet.c
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\preprocess\
hsh_dump.c
v_dialer\dialer\src\preprocess\
ij_merge.c
v_dialer\dialer\src\imon\internetmon.c
v_dialer\ivr\src\ivr_config.c
v_dialer\dialer\src\utility\jobkeys.c
Maintenance and Troubleshooting Guide
%s - Failed to open file %s
March 2008
275
E00515
276
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\markrec\latemrk.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\lettergen\mail_label.c
v_dialer\dialer\src\editor\master_ed.c
v_dialer\dialer\src\menu\menu.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\core\msg_loader.c
v_dialer\dialer\DialerServiceActivation\
src\DSAIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
v_dialer\dialer\enforcer\src\
enlicense.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptValidatingProcessor_utest.cpp
v_dialer\dialer\src\core\nuisance.c
v_dialer\dialer\src\reports\history\
op_hist.c
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\postupdate\
postupdate.c
v_dialer\dialer\src\utility\print_pif.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbmaint\rec_update.c
v_dialer\dialer\src\dbmaint\record_ed.c
v_dialer\dialer\src\reports\rpt_mgr\
rpt_view.c
v_dialer\dialer\src\utility\scan.c
v_dialer\dialer\src\scrnbld\scrnbld.c
v_dialer\dialer\src\markrec\set_field.c
v_dialer\dialer\src\menu\submenu.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\reports\history\
vrecords.c
v_dialer\dialer\src\dbconst\writetape.c
v_dialer\dialer\src\utility\ziptoarea.c
Maintenance and Troubleshooting Guide
March 2008
E00516
v_dialer\dialer\DialerServiceActivation\
src\DSAIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
%s - Failed to close file %s
E00517
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\utility\ziptoarea.c
%s - Failed to create file %s
E00518
v_dialer\dialer\src\callsel\callconn.c
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\
agent_misc_util.c
v_dialer\dialer\src\core\agent_sys_util.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\pcextract\fileops.c
v_dialer\dialer\src\reports\history\
op_hist.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
v_dialer\dialer\src\reports\history\
op_hist.c
v_dialer\dialer\src\dbconst\readtape.c
%s - Failed to read from file %s
E00519
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Failed to write to file %s
E00520
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\reports\history\
vrecords.c
%s - Failed to lock file %s
E00521
v_dialer\library\libdsi\src\getnum.c
%s - Failed to unlock file %s
E00522
v_dialer\dialer\src\utility\enq_pty.c
v_dialer\dialer\Cmdctrl\HeadsetLib.cpp
v_dialer\dialer\Cmdctrl\ShmAccess.cpp
%s - Failed to attach to shm,
err=%d, id=%d
Maintenance and Troubleshooting Guide
March 2008
277
278
E00523
v_dialer\library\libdsi\src\conn_queue.c
%s - Failed to detach from shm,
err=%d, id=%d
E00524
v_dialer\library\libdsi\src\conn_queue.c
%s - Failed to remove shm,
err=%d, id=%d
E00525
v_dialer\library\libdsi\src\mqueue.c
%s - Failed to get msgq,
err=%d, id=%d
E00526
v_dialer\library\libdsi\src\mqueue.c
%s - Failed to send msg,
err=%d, id=%d
E00527
v_dialer\library\libdsi\src\mqueue.c
%s - Failed to recv msg,
err=%d, id=%d
E00528
v_dialer\library\libdsi\src\mqueue.c
%s - Failed to remove msgq,
err=%d, id=%d
E00529
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\dbmaint\rec_update.c
v_dialer\dialer\src\swif\exec\
swid_main.c
%s - Failed to invoke function
%s, err=%d
Maintenance and Troubleshooting Guide
March 2008
E00530
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\dnc_mark.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\lstextract\ext_data.c
v_dialer\dialer\src\lstextract\ext_list.c
v_dialer\dialer\src\utility\fdictdump.c
v_dialer\dialer\src\lettergen\formlet.c
v_dialer\dialer\src\preprocess\
ij_merge.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\lettergen\mail_label.c
v_dialer\dialer\src\preprocess\
setzones.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
v_dialer\dialer\src\dbconst\writetape.c
v_dialer\dialer\src\utility\ziptoarea.c
Maintenance and Troubleshooting Guide
%s - Failed to open calling list
%s
March 2008
279
280
E00531
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\dnc_mark.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\preprocess\
ij_merge.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\postupdate\
postupdate.c
v_dialer\dialer\src\preprocess\
setzones.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
v_dialer\dialer\src\dbconst\writetape.c
v_dialer\dialer\src\utility\ziptoarea.c
%s - Failed to read calling list
definition %s
E00532
v_dialer\dialer\src\markrec\chkentdt.c
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\
de_reject.c
v_dialer\dialer\src\callsel\call_scrn.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\lstextract\ext_data.c
v_dialer\dialer\src\preprocess\
ij_merge.c
v_dialer\dialer\src\markrec\latelst.c
v_dialer\dialer\src\markrec\latemrk.c
v_dialer\dialer\src\preprocess\listdist.c
v_dialer\dialer\src\lettergen\mail_label.c
v_dialer\dialer\src\preprocess\
setzones.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
v_dialer\dialer\src\utility\ziptoarea.c
Field %s not defined in calling
list %s
E00533
v_dialer\dialer\src\preprocess\listdist.c
Field %s has incorrect length
Maintenance and Troubleshooting Guide
March 2008
E00534
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\transfer.c
v_dialer\dialer\src\dbconst\readtape.c
Not a calling list
E00535
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
%s - No space on file system
E00536
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\dbconst\moj_conv.c
%s - Failed to initialize
keyboard
E00537
v_dialer\dialer\src\core\api_jobctl.c
%s - Failed to initialize screen
environment
E00538
v_dialer\dialer\src\core\api_jobctl.c
%s - Failed to setup command
keys
E00539
v_dialer\dialer\src\core\api_jobctl.c
%s - Failed to create %s
window
E00540
v_dialer\library\libui\src\vlui.c
%s - Failed to create window
pointer
E00541
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\dbmaint\redit_scrn.c
v_dialer\dialer\src\utility\vfiles.c
%s - Failed to open keys file
%s
E00542
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\dbconst\selection.c
%s - Field %s not defined in
calling list %s
E00543
v_dialer\dialer\src\preprocess\clhash.c
Field %s not defined in calling
list %s (WARNING)
E00544
v_dialer\dialer\src\core\listops.c
%s - Invalid Pattern '%s'
Maintenance and Troubleshooting Guide
March 2008
281
E00545
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\
agent_misc_util.c
v_dialer\dialer\src\core\chainhandler.c
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\op_handler.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\core\port_hndle.c
v_dialer\dialer\src\core\scripter.c
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\src\core\recall_rmp.c
%s:fail to send %s to %s
E00546
v_dialer\library\libutil\src\checkdir.c
Failed to create directory '%s' -errno %d: %s
E00547
v_dialer\library\libutil\src\checkdir.c
Non-directory '%s' in directory
path '%s'
E00548
v_dialer\dialer\src\core\conn_mgr.c
midtier\unixdev\services\src\
ShmDataReader.cpp
Missing/invalid entry for %s in
file %s
E00549
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\listserver\listserver.c
midtier\unixdev\services\src\
ShmDataReader.cpp
%s operation failed, file '%s' -errno %d: %s
E00550
midtier\unixdev\services\src\
ShmDataReader.cpp
Invalid entry for %s in file %s
near '%s'
E00551
282
Assertion failed (expression
false), aborting
E00552
v_dialer\dialer\src\listserver\listserver.c
midtier\unixdev\services\src\
ShmDataReader.cpp
Failed to open directory %d
E00553
midtier\unixdev\services\src\
ShmDataReader.cpp
File '%s' does not exist
E00554
v_dialer\dialer\src\listserver\listserver.c
%s operation failed
Maintenance and Troubleshooting Guide
March 2008
E00555
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\\callsel\md_callsel.c
midtier\unixdev\services\src\
EventServiceIF_i.cpp
v_dialer\dialer\DialerCmdCtrl\
expr_utest.cpp
%s - %s
E00556
v_dialer\library\libutil++\src\
ReadOnlyFile.cpp
File '%s' exists, but is not
readable by user %s
E00557
v_dialer\library\libutil++\src\
WriteOnlyFile.cpp
File '%s' exists, but is not
writable by user %s
E10000
v_dialer\library\libdsi\src\asclist.c
Exceeded max number (%d) of
associate calling lists
E10001
v_dialer\library\libdsi\src\asclist.c
Not an associate List
E10002
v_dialer\library\libdsi\src\asclist.c
Not an associate select file: %s
E10003
v_dialer\library\libdsi\src\asclist.c
Associate list name missing
E10004
v_dialer\library\libdsi\src\asclist.c
Associate list name not in
assoc.cfg file
E10005
v_dialer\library\libdsi\src\asclist.c
%s - Creation time for %s is
incorrect
E10006
v_dialer\library\libdsi\src\asclist.c
Failed to change master clist:
%s
E10007
v_dialer\library\libdsi\src\asclist.c
Invalid logical connector at line
%d
E10008
v_dialer\library\libdsi\src\asclist.c
Missing field name or value at
line %d
E10009
v_dialer\library\libdsi\src\asclist.c
Group may not begin with no
selection
E10010
v_dialer\library\libdsi\src\asclist.c
Gap found between select
fields within group
E10011
v_dialer\library\libdsi\src\asclist.c
Field name not found at line %d
E10012
v_dialer\library\libdsi\src\asclist.c
v_dialer\library\libdsi\src\script_lng.c
Pattern error at line %d: %s
E10013
v_dialer\library\libdsi\src\
sock_stream.cpp
can't find service entry in /etc/
services, errno=%d
E10014
v_dialer\library\libdsi\src\
sock_stream.cpp
socket call failed, errno=%d
Maintenance and Troubleshooting Guide
March 2008
283
E10015
v_dialer\library\libdsi\src\
sock_stream.cpp
Unable to bind to local address,
errno=%d
E10016
v_dialer\library\libdsi\src\
sock_stream.cpp
Unable to setup listen on
socket, errno=%d
E10017
v_dialer\library\libdsi\src\
sock_stream.cpp
Unable to accept connection on
socket, errno=%d
E10018
v_dialer\library\libdsi\src\
sock_stream.cpp
Unable to connect to socket,
errno=%d
E10019
v_dialer\library\libdsi\src\
sock_stream.cpp
Unable to send data to socket
%d, errno=%d
E10200
E10201
v_dialer\dialer\src\core\operator.c
Invalid line selection
E10600
Failed to allocate memory
E10601
Invalid usage
E10602
284
Unequal phone number field
lengths in file %s
v_dialer\dialer\src\core\job_strter.c
Invalid job name
E10603
Failed to open edit file
E10604
No editable line in job file
E10605
Job file in use
E10606
Wrong job for verification editor
E10607
Required field not filled in
E10608
HUNTGRP format error
E10609
No HUNTGRP setting
E10610
No Inbound jobs allowed
E10611
Invalid number of reserve
inbound line
E10612
Script label for answer missing/
invalid
E10613
Failed to read inbound calling
list
E10614
Failed to read associated
calling list
E10615
Failed to read inbound screen
file
Maintenance and Troubleshooting Guide
March 2008
E10616
Failed to read inbound screen
map
E10617
Failed to read multiple screen
E10618
Failed to read multiple screen
map
E10619
Failed to read associated
screen
E10620
Failed to read associated
screen map
E10621
Failed to read outbound list
E10622
Failed to read outbound screen
E10623
Failed to read outbound map
E10624
Failed to read calling script
E10625
Failed to read key file
E10626
Failed to match associated field
E10627
Failed to process data transfer
field
E10628
Failed to process associated
selection
E10629
dialerclient\Redwood\VBAppsApps\
Editor\MDIForm1.frm
dialerclient\Redwood\VBApps\Editor\
Classes\CJobs.cls
Selection list not available for
use
E10630
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
STATUSFLAG field missing
E10631
CODE field missing
E10632
DTE field missing
E10633
TME field missing
E10634
Invalid start or stop time format
E10635
Invalid Hit Rate
E10636
Invalid Expert Calling Ratio
E10637
Invalid call completion code for
Quota Value
E10638
Invalid quota value
Maintenance and Troubleshooting Guide
March 2008
285
286
E10639
Invalid paired phone count/type
E10640
Invalid number of phone lines
E10641
Odd number of phone lines
specified
E10642
Invalid phone type specified
E10643
Failed to initialize call strategy
E10644
Failed to read call strategy
E10645
Failed to verify call strategy
E10646
The specified job already
running
E10648
Non-OP completion code
specified for Quota setting
E10649
v_dialer\library\libdsi\src\job_cntrl.c
Failed to find linked job file
E10650
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\library\libdsi\src\job_cntrl.c
Linking between virtual agent
jobs and non-virtual jobs is not
permitted
E10651
Sales verification job linking is
not permitted
E10652
Job linking is not permitted
E10653
Invalid call completion code for
TRANSTAT
E10654
dialer_client\VB\Editor\MDIForm1.frm
dialer_client\VB\Editor\Classes\
CJobs.cls
Selection list for job not found
E10655
dialer_client\VB\Editor\MDIForm1.frm
dialer_client\VB\Editor\Classes\
CJobs.cls
No verification selection list
ready for job
E10656
dialer_client\VB\Editor\MDIForm1.frm
dialer_client\VB\Editor\Classes\
CJobs.cls
Selection list not created with
this calling list
E10657
missing or invalid script label
for call
E10658
Failed to open script file for IVR
ID
E10659
IVR script name not specified;
required if IVR ID specified
Maintenance and Troubleshooting Guide
March 2008
E10660
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
Unable to find script name in
script file for IVR ID
E10661
remote list use not permitted
E10662
Sales verification or managed
dialing must have agents
E10663
Managed dialing is not
permitted with sales verification
or inbound
E10664
Virtual agents cannot select a
specific unit to log in to
E10665
Sales verification is not
permitted with unit work lists
E10666
Sales verification is not
permitted with inbound
E10667
Selecting unit to log in to is not
permitted with inbound-only job
E10800
Not an error
E10801
Not an open file descriptor
E10802
Failed to open file
E10803
Failed to close file
E10804
Failed to lock record
E10805
Failed to unlock record
E10806
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E10807
E10808
Failed to read file header
Failed to write file header
v_dialer\library\libutil++\src\
KeywordValue.cpp
v_dialer\library\libutil++\src\
mbcs_string.cpp
v_dialer\library\libutil++\src\
SerializableErrorRev_dialer\dialer\src\
core\porter.cpp
v_dialer\library\libutil++\src\
SerializableKvErrorStorage.cpp
Failed to read record
E10809
Failed to write record
E10810
Failed to allocate CLSTAT table
Maintenance and Troubleshooting Guide
March 2008
287
288
E10811
Failed to get record totals
E10812
Invalid operation code
E10813
Failed to read file dictionary
E10814
Failed to write file dictionary
E10815
Failed to create file
E10816
Failed to access file
E10817
Unconverted to year 2000
E10818
Unable to connect to listserver
E10819
XFD overflow (no XFD slots
available)
E10820
Socket read error
E10821
Socket write error
E10822
Tag value incorrect - message
alignment/framing error
E10823
File is open for reading only
E10824
File is open for writing only
E10850
v_dialer\library\libdsi\src\claccess.c
Unable to open list '%s'
E10851
v_dialer\library\libdsi\src\claccess.c
gethostbyname ('%s') failed
E10852
v_dialer\library\libdsi\src\claccess.c
socket () failed
E10853
v_dialer\library\libdsi\src\claccess.c
connect (conn_fd=%d) failed (is
listserver running on host
'%s'?)
E10854
v_dialer\library\libdsi\src\claccess.c
_LcCreateXfd () failed
E10855
v_dialer\library\libdsi\src\claccess.c
Write error -- wrote %d !=
expected %d
E10856
v_dialer\library\libdsi\src\claccess.c
clstat (%d) failed
E10857
v_dialer\library\libdsi\src\claccess.c
clrddict (%d) failed
E10858
v_dialer\library\libdsi\src\claccess.c
getservbyname () failed -- using
default LSERVPORT value
(%d)
E10859
v_dialer\library\libdsi\src\cllaccess.c
Bad file descriptor (%d)
Maintenance and Troubleshooting Guide
March 2008
E10860
v_dialer\library\libdsi\src\claccess.c
File corruption or record size
mismatch detected in calling list
%s; fd=%d
E10861
v_dialer\library\libdsi\src\cllaccess.c
Failed to remove file %s
E10900
v_dialer\library\libdsi\src\conn_crit.c
Error: Value: <%s> not in
master.cfg
E11000
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Error: Recall attempt #%d (%s)
can't be less than %d seconds
E11001
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Recall (%s) attempts can't
exceed %d
E11002
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid recall code: %s
E11003
v_dialer\library\libutil++\src\
FileMasterConfig.cpp
v_dialer\library\libdsi\src\cstgy.c
Failed to determine max
number of phones
E11004
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Field value missing
E11005
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Gap found between selection
criteria lines
E11006
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Extra ',' found
E11007
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid phone: %s
E11008
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid field name: %s
E11009
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid field value: %s
E11010
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid logical connector: %s
Maintenance and Troubleshooting Guide
March 2008
289
E11011
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
E11012
Invalid completion code: %s
E11013
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid ring count: %s. Must be
1 - %d
E11014
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Invalid call detection mode: %s
E11015
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
v_dialer\library\libdsi\src\cstgy.c
Error: Recall attempt #%d (%s)
can't be less than %d minutes
E12000
v_dialer\library\libdsi\src\getnum.c
File %s busy, try again later
E12100
Molocale - Unknown language
name %s
E12101
v_dialer\library\libutil\src\molocale.c
Molocale - Failed to set locale
%s errno=%d
E12150
v_dialer\library\libdsi\src\pvrs_helper.c
PVRS - Failed to initialize %s
E12151
290
Invalid time zone letter: %c
Hash key field is not defined in
%s
E12152
v_dialer\library\libdsi\src\pvrs_helper.c
v_dialer\dialer\src\dbmaint\record_ed.c
No Previous Record
E12153
v_dialer\library\libdsi\src\pvrs_helper.c
v_dialer\dialer\src\dbmaint\record_ed.c
No More Record
E12154
v_dialer\dialer\src\core\oper_pvrs.c
v_dialer\dialer\src\dbmaint\record_ed.c
Failed to Load Record
E12155
v_dialer\dialer\src\core\oper_pvrs.c
Record Currently In Use
E12156
v_dialer\library\libdsi\src\pvrs_helper.c
No Record Found
E12200
Attempt to read hidfile without
lock
E12201
Username %s exceeds %d
characters in length
E12202
%s - Failed to lock file %s,
errno(%d)
E12203
%s - Failed to unlock file %s,
errno(%d)
Maintenance and Troubleshooting Guide
March 2008
E12345
v_dialer\dialer\DialerCmdCtrl\
DccGlobalFunc.cpp
E12400
v_dialer\library\libdsi\src\keystroke.c
v_dialer\library\libutil\src\tsystem.c
tget returned errno %d raising
signal %d
E12600
v_dialer\library\libdsi\src\map_dict.c
v_dialer\library\libcallsel\src\
map_dict2.cpp
Calling list %s not in shared
memory
E12601
v_dialer\library\libdsi\src\map_dict.c
v_dialer\library\libcallsel\src\
map_dict2.cpp
Calling list field count not match
E12800
v_dialer\library\libdsi\src\map_scrn.c
Failed to find screen %s
E13000
v_dialer\library\libdsi\src\mqueue.c
IPC - Invalid input argument
E13001
v_dialer\library\libdsi\src\mqueue.c
IPC - Invalid ipc entry
E13002
IPC - Invalid ipc name
E13003
v_dialer\library\libdsi\src\mqueue.c
IPC - Invalid ipc number %d
E13004
v_dialer\library\libdsi\src\mqueue.c
Warning: CFRM message
truncated
E13005
v_dialer\library\libdsi\src\mqueue.c
Timed out waiting for %s
confirmation
E13006
v_dialer\library\libdsi\src\mqueue.c
Response message too long!
E13007
v_dialer\library\libdsi\src\mqueue.c
IPC - Failed to open opmon
message queue
E13008
v_dialer\library\libdsi\src\mqueue.c
%s - Failed on semaphore
removal, err=%d key=%d
E13009
v_dialer\library\libdsi\src\mqueue.c
%s - Failed on semaphore
operation, err(%d) key = %d
code = %d
E13010
v_dialer\library\libdsi\src\mqueue.c
%s - Accessing bad semaphore
E13011
v_dialer\library\libdsi\src\mqueue.c
%s - Failed to open
semaphore, err(%d)
E13200
v_dialer\library\libdsi\src\opident.c
Headset value (%s, %d) out of
bound
E13201
v_dialer\library\libdsi\src\opident.c
Headset %d not specified in %s
file
E13400
Maintenance and Troubleshooting Guide
Missing or invalid YES/NO field
March 2008
291
E13401
Missing or invalid length
E13402
v_dialer\library\libdsi\src\phonefmt.c
Missing prefix
E13403
v_dialer\library\libdsi\src\phonefmt.c
Missing line type
E13404
v_dialer\library\libdsi\src\phonefmt.c
Missing or invalid num of chars
to strip
E13405
Missing prefix
E13406
v_dialer\library\libdsi\src\phonefmt.c
Missing suffix
E13407
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Duplicate ALL phone numbers
specification
E13408
v_dialer\library\libdsi\src\phonefmt.c
Phone number too long
E13409
v_dialer\library\libdsi\src\phonefmt.c
Dial phone number too long
E13410
v_dialer\library\libdsi\src\phonefmt.c
Missing std to dial phone
number format
E13411
v_dialer\library\libdsi\src\phonefmt.c
Invalid use of ALL phone
numbers specification
E13412
v_dialer\library\libdsi\src\phonefmt.c
Missing phone numbers
E13600
v_dialer\library\libdsi\src\rpt_server.c
Report failed, system out of
space
E13800
v_dialer\library\libdsi\src\swcfg_tbl.c
Invalid Headset Number (%d,
%s)
E13801
v_dialer\library\libdsi\src\swcfg_tbl.c
Headset port no. %d out of
range (1-%d)
E13802
v_dialer\library\libdsi\src\swcfg_tbl.c
Normal trunk port no. %d out of
range (1-%d)
E13803
v_dialer\library\libdsi\src\swcfg_tbl.c
Invalid normal trunk equip no
%d
E13804
E13805
Invalid normal trunk group no
%d
v_dialer\library\libdsi\src\swcfg_tbl.c
E13806
E13807
Failed to determine switch type
v_dialer\library\libdsi\src\swcfg_tbl.c
E14100
292
Invalid transfer trunk group no
%d
Maintenance and Troubleshooting Guide
Failed to process line (%s)
Invalid timezone from GMT
March 2008
E14101
Invalid time format at line %d in
file %s
E14200
v_dialer\library\libdsi\src\vlloccall.c
Missing delay specification
E14201
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Missing or invalid low range
E14202
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Invalid range character
E14203
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Invalid high range
E14204
v_dialer\library\libdsi\src\vlloccall.c
Invalid min delay
E14205
v_dialer\library\libdsi\src\vlloccall.c
Missing completion code
E14206
v_dialer\library\libdsi\src\vlloccall.c
Invalid completion code
E14207
v_dialer\library\libdsi\src\vlloccall.c
Range does not come after
previous range
E14208
v_dialer\library\libdsi\src\vlloccall.c
Missing limit
E14209
v_dialer\library\libdsi\src\phonefmt.c
v_dialer\library\libdsi\src\vlloccall.c
Missing or invalid YES/NO field
E14210
v_dialer\library\libdsi\src\vlloccall.c
Missing time zone specification
for country %d
E14211
v_dialer\library\libdsi\src\vlloccall.c
Missing or invalid time zone
designation
E14212
v_dialer\library\libdsi\src\vlloccall.c
Missing reject phone number
pattern
E14213
v_dialer\library\libdsi\src\vlloccall.c
Invalid reject phone number
pattern
E14214
v_dialer\library\libdsi\src\vllocmisc.c
v_dialer\library\libdsi\src\vllocport.c
Duplicate country specified
E14215
v_dialer\library\libdsi\src\vllocmisc.c
v_dialer\library\libdsi\src\vllocport.c
Invalid answer delay time
E14216
v_dialer\library\libdsi\src\vllocport.c
Invalid DAA type
E14217
v_dialer\library\libdsi\src\vllocport.c
Invalid VM2 locale code
E14218
v_dialer\library\libdsi\src\vllocport.c
Invalid phone number length
E14219
v_dialer\library\libdsi\src\vllocport.c
Rejected phone number (L%d)
Maintenance and Troubleshooting Guide
March 2008
293
E14220
v_dialer\library\libdsi\src\vllocport.c
Cannot find time zone for
phone number
E14221
v_dialer\library\libdsi\src\vllocport.c
Invalid offhook retry delay
E14222
v_dialer\library\libdsi\src\vllocport.c
Invalid wait limit
E14400
294
Unknown select file %s
E14401
v_dialer\dialer\src\preprocess\
ij_merge.c
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
Unknown call completion code
%s
E14402
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
No call completion codes
selected
E14404
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
Missing field name or value at
selection entry %d
E14405
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
Group may not begin with no
selection
E14406
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
Gap found between select
fields within group
E14407
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
Field name not found at
selection entry %d
E14408
v_dialer\library\libcallsel\src\
CallSelLib.cpp
v_dialer\library\libdsi\src\cselect.c
Pattern error at selection entry
%d: %s
E14409
v_dialer\library\libdsi\src\conn_queue.c
Unit Control - Invalid memory
slot position
E14410
v_dialer\library\libdsi\src\conn_queue.c
Unit Control - Failed to attach to
data segment
E14800
v_dialer\library\libutil\src\tcap.c
Termcap entry larger than
buffer size
E14801
v_dialer\library\libutil\src\tcap.c
Invalid termcap entry format
E14802
v_dialer\library\libutil\src\tcap.c
'tc' entries exceed maximum
allowed
Maintenance and Troubleshooting Guide
March 2008
E14900
v_dialer\library\libutil\src\terminal.c
Terminal type %s not found in
%s
E14901
v_dialer\library\libutil\src\terminal.c
Default terminal type vt100 not
found in %s
E15200
v_dialer\library\libui\src\vlui.c
No summary information
available
E15201
v_dialer\library\libui\src\vlui.c
Invalid field type
E15202
v_dialer\library\libui\src\vlui.c
Invalid value, Must be %s
E15203
v_dialer\library\libui\src\vlui.c
Sorry, command not allowed
inside editor
E15204
v_dialer\library\libui\src\vlui.c
%s - Menubar '%s' already
exists.
E15205
v_dialer\library\libui\src\vlui.c
%s - Menubar '%s' not found.
E15400
v_dialer\library\libui\src\vlui.c
%s:new_bsrch - Memory
allocation (%d bytes) failed, loc
%d
E15401
v_dialer\library\libdsi\src\bsrch.c
%s:new_bsrch - Bad value in
new_bsrch (cl_name=%s
cl_fd=%d, cl_keyname=%s
init_type=%c pgmname=%s
log_type=%d log_file=%s)
E15402
v_dialer\library\libdsi\src\bsrch.c
%s:new_bsrch - List recno %d
locked-skipping;
E15403
v_dialer\library\libdsi\src\bsrch.c
%s:new_bsrch - List recno %d
locked-aborting;
E15404
v_dialer\library\libdsi\src\bsrch.c
%s:new_bsrch - Bad calling list
record parameter(s):
keylen=%d reclen=%d
nrecs=%d
E15420
v_dialer\library\libdsi\src\bsrch.c
%s:new_hsrch - Memory
allocation (%d bytes) failed, loc
%d
E15421
v_dialer\library\libdsi\src\bsrch.c
%s:new_hsrch - Unable to
open hash file for %s
E15422
v_dialer\library\libdsi\src\bsrch.c
%s:new_hsrch - Missing
key_field entry in hash file %s
E15424
Maintenance and Troubleshooting Guide
%s:new_hsrch - Bad calling list
record parameter(s):
keylen=%d reclen=%d
March 2008
295
296
E16000
v_dialer\library\libutil\src\labfdctry.c
Missing or invalid country code
E16100
v_dialer\library\libutil\src\labfile.c
Line too long
E16101
v_dialer\library\libutil\src\labfile.c
Missing label
E16102
v_dialer\library\libutil\src\labfile.c
Invalid label on line
E16400
v_dialer\library\libutil\src\preftree.c
Range not properly nested
E16401
v_dialer\library\libutil\src\preftree.c
Prefix falls on a range's border
E16402
v_dialer\library\libutil\src\preftree.c
Range border falls on a prefix
E16403
v_dialer\library\libutil\src\preftree.c
Range straddles previous
range
E16404
v_dialer\library\libutil\src\preftree.c
Prefix has the same value as a
shorter prefix
E16405
v_dialer\library\libutil\src\preftree.c
Same prefix is already
specified
E16406
v_dialer\library\libutil\src\preftree.c
Prefix has the same value as a
longer prefix
E16407
v_dialer\library\libutil\src\preftree.c
Missing prefix
E16408
v_dialer\library\libutil\src\preftree.c
Invalid character in prefix
E16409
v_dialer\library\libutil\src\preftree.c
Low range has fewer digits
than high
E16410
v_dialer\library\libutil\src\preftree.c
Range borders are out of order
E16411
v_dialer\library\libutil\src\preftree.c
Bad argument in ptree
E16500
v_dialer\library\libutil\src\hash.c
Hash_get (%x, %s, %d) failed
due to too many probes
E16501
v_dialer\library\libutil\src\hash.c
Requested size %d is too large
-- Max hash table slots
currently supported is %d
E16600
v_dialer\library\libutil\src\expr.c
Pattern '%s': Expected
numerical lval, found '%s'
E16601
v_dialer\library\libutil\src\expr.c
Pattern '%s': Expected
numerical rval, found '%s'
E16602
v_dialer\library\libutil\src\expr.c
Pattern '%s': lval > rval (%g >
%g)
E16603
v_dialer\library\libutil\src\expr.c
Pattern '%s': Expected hyphen,
list separator, or end of pattern;
found '%c'
Maintenance and Troubleshooting Guide
March 2008
E16604
v_dialer\library\libutil\src\expr.c
Pattern '%s': Unexpected end
of numerical comparison
E16605
v_dialer\library\libutil\src\expr.c
Pattern '%s': Pattern too large
E16606
v_dialer\library\libutil\src\expr.c
Pattern '%s': Bad or missing
DATEFORM parameter in
master.cfg
E16607
v_dialer\library\libutil\src\expr.c
Pattern '%s': Bad format for
date comparison
E16608
v_dialer\library\libutil\src\expr.c
Pattern '%s': Bad format for
time comparison
E16609
v_dialer\library\libutil\src\expr.c
Pattern '%s': Bad format for
relative date comparison
E16610
v_dialer\library\libutil\src\expr.c
Pattern '%s': Undefined
backslashed character '%c'
E16611
v_dialer\dialer\DialerCmdCtrl\
expr_utest.cpp
Pattern '%s': Unknown pattern
type '%c' specified
E16612
v_dialer\library\libutil\src\expr.c
Pattern '%s': Failed to compile use explicit pattern syntax for
more details
E16620
v_dialer\library\libutil\src\expr.c
Unable to compare - previous
pattern failed compilation - '%s'
E16621
v_dialer\library\libutil\src\expr.c
No compiled pattern to
compare against for string '%s'
E16800
v_dialer\library\libutil\src\undefined.c
Undefined func call: %s
E16900
v_dialer\library\libutil\src\exec_prog.c
EXECPROG:Unexpected exit
from waitpid() returning
-1:errno=%d:pid=%d,child=%d
E16901
v_dialer\library\libutil\src\exec_prog.c
EXECPROG:not returning from
child process:pid=%d,child=%d
E16902
v_dialer\library\libutil\src\exec_prog.c
EXECPROG:Exit(%d)
wait(pid=%d)
E16903
v_dialer\library\libutil\src\exec_prog.c
EXECPROG:Signal STOPPED
wait(%d)
E16904
v_dialer\library\libutil\src\exec_prog.c
EXECPROG:Sig_Exit:errno=%
d:stat=0x%X:sig=%d:pid=%d,c
hild=%d
E16905
v_dialer\library\libutil\src\exec_prog.c
EXECPROG:Unexpected
exit:errno=%d:stat_loc=0x%X:r
et=%d:pid=%d,child=%d
Maintenance and Troubleshooting Guide
March 2008
297
E16906
v_dialer\library\libutil\src\exec_prog.c
EXECPROG:Killed
Child(%d):%s:
E16907
v_dialer\library\libutil\src\exec_prog.c
EXECPROG:errno=%d:stat_lo
c=0x%X:ret=%d:pid=%d,child=
%d
E16908
v_dialer\library\libutil\src\exec_prog.c
PID(%d)Relaying signal=%d to
child_pid=%d
E16909
v_dialer\library\libutil\src\exec_prog.c
PID(%d)Ignoring signal=%d
E16910
v_dialer\library\libutil\src\exec_prog.c
PID(%d)Activating Default
Signal Handler
E16911
v_dialer\library\libutil\src\exec_prog.c
PID(%d)Returning to
exec_prog() Routine
E16912
v_dialer\library\libutil\src\exec_prog.c
PID(%d)Calling Primary Signal
Handler
E17000
v_dialer\library\libutil\src\account.c
v_dialer\library\libutil++\src\account_r.c
Error: system message '%s' not
found
E17001
Error: unable to open account
file '%s'
E17002
Error: unknown user '%s'
specified.
E17003
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
E17004
E17005
298
Error: unknown group '%s'
specified.
Error: chown ('%s', %d, %d)
failed.
v_dialer\library\libutil\src\config.c
Error: malloc ('%s') failed.
E17100
getconfig: File '%s' is empty
E17101
getconfig: Couldn't open file
'%s'
E18200
v_dialer\library\libswif\src\port_dg.c
DISABLE INBOUND FAILED:
(%d)%s
E18201
v_dialer\library\libswif\src\port_dg.c
ENABLE INBOUND FAILED:
(%d)%s, ns=%x, rsb=%x,
cause_IE=%x
E18202
v_dialer\library\libswif\src\port_dg.c
PORTER%d: switch out of sync
E18203
v_dialer\dialer\src\core\msg_loader.c
v_dialer\library\libswif\src\port_dg.c
Download of voice prompt file
[%s] failed
Maintenance and Troubleshooting Guide
March 2008
E18204
v_dialer\library\libswif\src\port_dg.c
CALL FAILED ON %d: %s
E18205
v_dialer\library\libswif\src\port_dg.c
ORULE OVERRIDE DISABLE
FAILED: %s
E18206
v_dialer\library\libswif\src\port_dg.c
HANGUP FAILED FOR %d:
%s, ns=%x, rsb=%x,
cause_IE=%x
E18207
v_dialer\library\libswif\src\port_dg.c
HANGUP FAILED: EQUIP= %d
E18208
v_dialer\library\libswif\src\port_dg.c
TRNSFR Transfer trunks not
configured
E18209
v_dialer\library\libswif\src\port_dg.c
TRNSFR No transfer trunks
available
E18210
dialer_library\libswif\src\port_dg.c
TRNSFR Transfer dial failed
E18211
TRNSFR Transfer Failed
E18212
v_dialer\library\libswif\src\port_dg.c
TRNSFR Failed to put line on
hold
E18213
v_dialer\library\libswif\src\port_dg.c
RESPONSE FAILED: (%d)%s,
ns=%x, rsb=%x, cause_IE=%x
E18214
v_dialer\library\libswif\src\port_dg.c
DOWNLOAD FAILED: file=%s,
%s, ns=%x, rsb=%x,
cause_IE=%x
E18215
v_dialer\library\libswif\src\port_dg.c
TRANSFER DIAL FAILED:
(%d)%s, ns=%x, rsb=%x,
cause_IE=%x
E18216
TRANSFER CONFERENCE
FAILED: (%d)%s, ns=%x
E18217
Porter %d failed to busy-out
line
E18218
Porter %d abandoned inbound
call
E18219
v_dialer\library\libswif\src\port_dg.c
DELIVER FAILED: (%d)%s,
ns=%x, rsb=%x, cause_IE=%x
E18220
v_dialer\library\libswif\src\port_dg.c
POLL_MSG FAILED: (%d)%s,
ns=%x, rsb=%x, cause_IE=%x
E18221
v_dialer\library\libswif\src\port_dg.c
OFFHOOK FAILED FOR %d:
%s, ns=%x, rsb=%x,
cause_IE=%x
Maintenance and Troubleshooting Guide
March 2008
299
300
E18222
v_dialer\library\libswif\src\port_dg.c
HOOKFLASH FAILED:
(%d)%s, ns=%x, rsb=%x,
cause_IE=%x
E18223
v_dialer\library\libswif\src\port_dg.c
STUTTERED DIALTONE
TEST FAILED: (%d)%s,
ns=%x, rsb=%x, cause_IE=%x
E18224
v_dialer\library\libswif\src\port_dg.c
DIAL FAILED: (%d)%s, ns=%x,
rsb=%x, cause_IE=%x
E18225
v_dialer\library\libswif\src\port_dg.c
TRANSFER OFFHOOK
FAILED: (%d)%s, ns=%x,
rsb=%x, cause_IE=%x
E18226
v_dialer\library\libswif\src\port_dg.c
CAMPON FAILED
equip_no=%d: %s, ns=%x,
rsb=%x, cause_IE=%x,
status=%d
E18227
v_dialer\library\libswif\src\port_dg.c
POLL_EVENT FAILED:
(%d)%s, ns=%x, rsb=%x,
cause_IE=%x
E18228
v_dialer\library\libswif\src\port_dg.c
TRNSFR Failed to find job
specified holdmsg number in
voicemsg.cfg
E18400
v_dialer\library\libswif\src\swid.c
swid_process_report: bad ns =
0x%04x
E18401
v_dialer\library\libswif\src\swid.c
swid_process_report: bad
0x%x reply
E18402
v_dialer\library\libswif\src\swid.c
swid_process_report: bad
<port> in 0x%x reply
E18403
v_dialer\library\libswif\src\swid.c
swid_process_report: 0x%x
reply <control_port> out of
range.
E18404
v_dialer\library\libswif\src\swid.c
swid_process_report: 0x69
reply on inactive virtual port
(0x%04x).
E18405
v_dialer\library\libswif\src\swid.c
swid_process_report: 0x69
reply <outgoing_port=0x%03x>
out of range.
E18406
v_dialer\library\libswif\src\swid.c
swid_report_72(reset): bad
NSB.
E18407
v_dialer\library\libswif\src\swid.c
swid_process_report: bad port
= %d(0x%03x) in 0xDA reply
Maintenance and Troubleshooting Guide
March 2008
E18408
v_dialer\library\libswif\src\swid.c
swid_process_report: Ignored
0x%x report on
port=%d(0x%03x),supcode=0x
%04x
E18409
v_dialer\library\libswif\src\swid.c
swid_process_report:
unknown/unexpected change
E18410
v_dialer\library\libswif\src\swid.c
(%d)/event %s(%d) on port
(0x%03x).
E18411
v_dialer\library\libswif\src\swid.c
swid_process_report: bad port
%d(0x%03x) in 0xDB reply
E18412
v_dialer\library\libswif\src\swid.c
change=%x
E18413
v_dialer\library\libswif\src\swid.c
swid_process_report: <port>
(0x%03x) in 0xDD reply not
enabled for inbound
E18414
v_dialer\library\libswif\src\swid.c
swid_process_report: 0x49
reply on inactive virtual port
(0x%04x).
E18415
v_dialer\library\libswif\src\swid.c
swid_process_report: 0x49
reply <outgoing_port=0x%03x>
out of range.
E18416
v_dialer\library\libswif\src\swid.c
swid_process_report: bad port
= %d(0x%03x) in 0xEA reply
E19000
v_dialer\library\libswif\src\swie.c
'%s' not in /etc/hosts!
E19001
v_dialer\library\libswif\src\swie.c
swif: '%s' cannot create socket!
E19002
v_dialer\library\libswif\src\swie.c
swif: cannot connect to
ethernet switch port
'%s:%d',(%d)
E19003
v_dialer\library\libswif\src\swie.c
swif: cannot set socket option
SO_KEEPALIVE, err(%d)
E19004
v_dialer\library\libswif\src\swie.c
Failed to read packet header
(%d,%d)
E19005
v_dialer\library\libswif\src\swie.c
Failed to read packet body
(%d,%d)
E19006
v_dialer\library\libswif\src\swie.c
ethernet receive buffer too
small
E19007
v_dialer\library\libswif\src\swie.c
swif: listener cannot
swic_init_client()
E19200
v_dialer\library\libswif\src\swiq.c
Unable to save switch log
history
Maintenance and Troubleshooting Guide
March 2008
301
302
E19201
v_dialer\library\libswif\src\swiq.c
Log event from %s line %d is
being throttled.
E19400
v_dialer\library\libswif\src\switch_dg.c
Unable to initialize switch
channel, swif return=[%d]
E19401
v_dialer\library\libswif\src\switch_dg.c
Failed to reset switch channel
E19402
v_dialer\library\libswif\src\switch_dg.c
%s TONE DOWNLOAD
FAILED, %s, ns=%x, rsb=%x,
cause_IE=%x
E19403
v_dialer\library\libswif\src\switch_dg.c
GREETING PROMPT
DOWNLOAD FAILED, %s,
ns=%x, rsb=%x, cause_IE=%x
E19404
v_dialer\library\libswif\src\switch_dg.c
Failed to reset switch, swif
return=[%d],ns=%x, rsb=%x,
cause_IE=%x
E19405
v_dialer\library\libswif\src\switch_dg.c
ZIP TONE FAILED, %s,
ns=%x, rsb=%x, cause_IE=%x,
equip=%d
E19406
v_dialer\library\libswif\src\switch_dg.c
v_dialer\library\libswif\src\port_sd.c
CONNECT RESPONSE: %s,
ns=%x, rsb=%x, cause_IE=%x,
equip1:%d, equip2:%d
E19407
v_dialer\library\libswif\src\switch_dg.c
DISCONNECT RESPONSE:
%s, ns=%x, rsb=%x,
cause_IE=%x, equip:%d,
E19408
v_dialer\library\libswif\src\switch_dg.c
Invalid prompt index:%d
E19600
v_dialer\library\libswif\src\swix.c
unexpected EOF/incomplete
comment
E19601
v_dialer\library\libswif\src\swix.c
non-ASCII character.
E19602
dialer_library\libswif\src\swix.c
Error reading exercise script
'%%s':
E19603
v_dialer\library\libswif\src\swix.c
line %%d:
E19604
v_dialer\library\libswif\src\swix.c
event table full
E19605
v_dialer\library\libswif\src\swix.c
not a SWIF function name
E19606
v_dialer\library\libswif\src\swix.c
expecting a time value, digits
only, enclosed in ()
E19607
v_dialer\library\libswif\src\swix.c
expecting closing paren
E19608
v_dialer\library\libswif\src\swix.c
expecting SWIF event name
Maintenance and Troubleshooting Guide
March 2008
E19609
v_dialer\library\libswif\src\swix.c
too many exercise script errors
-- aborting!
E25000
v_dialer\dialer\src\callsel\call_scrn.c
Recall field name or value
missing
E25001
v_dialer\dialer\src\callsel\call_scrn.c
Recall field name not found
E25002
v_dialer\dialer\src\callsel\call_scrn.c
Recall pattern error: %s
E25003
v_dialer\dialer\src\callsel\callsel.c
v_dialer\dialer\src\core\
agent_misc_util.c
%s - Failed to locate strategy
files
E25004
v_dialer\dialer\src\callsel\call_scrn.c
Unknown time zone designator
%c
E25005
v_dialer\dialer\src\callsel\call_scrn.c
No time zones selected
E25007
E25008
Missing field name or value at
recall entry %d
v_dialer\dialer\src\callsel\call_scrn.c
E25009
Group may not begin with no
selection
Gap found between select
fields within group
E25010
v_dialer\dialer\src\callsel\call_scrn.c
Field name not found at recall
entry %d
E25011
v_dialer\dialer\src\callsel\call_scrn.c
Pattern error at recall entry %d:
%s
E25012
v_dialer\dialer\src\callsel\call_scrn.c
Sort direction is invalid
E25013
Sort field name not found
E25014
v_dialer\dialer\src\callsel\call_scrn.c
Unit work list Key field name
missing
E25015
v_dialer\dialer\src\callsel\call_scrn.c
Unit work list Key field name
not found
E25016
v_dialer\dialer\src\callsel\call_scrn.c
Strategy file name missing
E25017
v_dialer\dialer\src\callsel\call_scrn.c
Strategy file name not found
E25018
v_dialer\dialer\src\callsel\call_scrn.c
Unable to read strategy file
E25019
v_dialer\dialer\src\callsel\call_scrn.c
%s - Unable to initialize
strategy table
E25020
v_dialer\dialer\src\callsel\callsel.c
%s - Time zoning of phone
numbers not done on calling list
Maintenance and Troubleshooting Guide
March 2008
303
E25021
v_dialer\dialer\src\callsel\callsel.c
%s - Master calling list error
E25022
v_dialer\dialer\src\callsel\callsel.c
%s - Unable to get callsel
number
E25023
v_dialer\dialer\src\callsel\callsel.c
%s - List selection aborted
E25024
v_dialer\dialer\src\callsel\call_scrn.c
%s - Calling List %s is not Time
Zoned
E25025
v_dialer\dialer\src\callsel\call_scrn.c
%s - %s field not defined or
incorrect length
E25026
v_dialer\dialer\src\callsel\callsel.c
Callsel verification failed.
Please use change option
E25027
Improper Usage
E25028
v_dialer\dialer\src\callsel\callsel.c
Special time zone + is not
available
E25029
v_dialer\dialer\src\callsel\call_scrn.c
Report field name not found
E25030
304
You must specify at least one
field
E25031
v_dialer\library\libcallsel\src\
cllcallsel.cpp
Timeout: failed to identify status
of the Index Processing within
%d seconds
E25032
v_dialer\library\libcallsel\src\
cllcallsel.cpp
Failed to start asynchronous
Index Processing sub-process
E25501
v_dialer\dialer\src\callsel\callconn.c
Callsel terminated by signal =
%d
E25502
v_dialer\dialer\src\callsel\callconn.c
Callsel exited with status of %o
(octal)
E25503
v_dialer\dialer\src\callsel\callconn.c
Couldn't open file %s
E25504
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\callsel\callconn.c
Failed to read file %s
E25505
v_dialer\dialer\src\callsel\callconn.c
callconn:fail to send zALTQUE
msg
E27000
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceController.cxx
midtier\unixdev\SysHealth\src\
SystemHealthImpl.cpp
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
Invalid input parameter(s)
Maintenance and Troubleshooting Guide
March 2008
E27100
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceController.cxx
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceMonitorIFImpl.c
xx
midtier\unixdev\SysHealth\src\
SystemHealthImpl.cpp
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
E27200
Failed to process the method
Failed to open the file
E27300
midtier\unixdev\ServiceActivation\src\
SARequest.cxx
midtier\unixdev\ServiceActivation\src\
ServiceActivationIFImpl.cxx
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceMonitorIFImpl.c
xx
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
Failed to activate the service
E28000
v_dialer\dialer\src\core\switcher.c
Failed to initialize switcher
E28100
v_dialer\dialer\src\core\driver.c
Unable to attach to data
segment
E28101
v_dialer\dialer\src\core\driver.c
invalid channel number %s
E28102
couldn't open switch channel
E28103
v_dialer\dialer\src\core\driver.c
*** no active channel !!
E28104
v_dialer\dialer\src\core\driver.c
'memory' is not implemented
E28105
cannot attach to ipc queue,
retval=%d, errno=%d
E28106
v_dialer\dialer\src\core\driver.c
equipment number type not
found
E28107
v_dialer\dialer\src\core\driver.c
no seize on ISDN ports
E28108
v_dialer\dialer\src\core\driver.c
no drop on ISDN ports
E28109
v_dialer\dialer\src\core\driver.c
UNRECOGNIZED COMMAND!
%s
E28200
v_dialer\dialer\src\core\conn_mgr.c
%s - Job %s %s already exists
E28201
v_dialer\dialer\src\core\conn_mgr.c
%s - Job %s %s does not exist
E28202
v_dialer\dialer\src\core\conn_mgr.c
%s - Exceeded shared
segment limit
Maintenance and Troubleshooting Guide
March 2008
305
E28203
v_dialer\dialer\src\core\conn_mgr.c
%s - No phone calls in wait but
wait count disagrees
E28204
v_dialer\dialer\src\core\conn_mgr.c
%s (test_inbound_service) Conn_op_line failed
E28205
v_dialer\dialer\src\core\conn_mgr.c
%s - Invalid slot number(%d)
passed
E28206
v_dialer\dialer\src\core\conn_mgr.c
%s - Invalid agent number %d
E28207
v_dialer\dialer\src\core\conn_mgr.c
%s - Invalid call trans type %c
E28208
v_dialer\dialer\src\core\conn_mgr.c
No oper_name ('%s') or
oper_jobnum (%d), cannot
archive
E28209
v_dialer\dialer\src\core\conn_mgr.c
No oper_name ('%s') or
oper_jobnum (%d), cannot
restore
E28210
v_dialer\dialer\src\core\conn_mgr.c
No oper_name ('%s'), cannot
restore
E28211
v_dialer\dialer\src\core\conn_mgr.c
No jobname ('%s') or jobnum
(%d), cannot archive
E28300
306
Unable to create a list of
extensions
E28301
v_dialer\dialer\src\core\conn_mgr.c
add_agent: Unable to insert
agent
E28302
v_dialer\dialer\src\core\conn_mgr.c
add_agent: entered a duplicate
value
E28303
v_dialer\dialer\src\core\conn_mgr.c
add_agent: Error getting
current pointer
E28304
v_dialer\dialer\src\core\conn_mgr.c
agent_recall: Unable to insert
recall
E28305
v_dialer\dialer\src\core\conn_mgr.c
recall_rmp - Exit since
AGENTOWNRECALL is off
E28306
v_dialer\dialer\src\core\conn_mgr.c
recall_rmp - Unable to create a
list of agent
E28307
v_dialer\dialer\src\core\conn_mgr.c
recall_rmp - Unable to create a
list of recall
E28308
v_dialer\dialer\src\core\conn_mgr.c
recall_rmp - unknown message
received '%s'
E28309
v_dialer\dialer\src\core\conn_mgr.c
Failed to setup ipc for agent %s
Maintenance and Troubleshooting Guide
March 2008
E28310
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\src\core\recall_rmp.c
recall_rmp - agent %s not
available
E28400
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Sales verification or managed
dialing must have agents
E28401
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Managed dialing is not
permitted with sales verification
or inbound
E28402
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Virtual agents cannot select a
specific unit to log in to
E28404
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Sales verification is not
permitted with unit work lists
E28405
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Sales verification is not
permitted with inbound
E28406
v_dialer\dialer\src\core\listops.c
Inbound with unshared account
ownership is not permitted
E28407
v_dialer\dialer\src\core\listops.c
Alternate selection %s is not
permitted with unit work lists
E28408
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\nuisance.c
%s - Failed to get job number
E28409
v_dialer\dialer\src\core\caller.c
Job startup failed in job
configuration
E28410
v_dialer\dialer\src\core\caller.c
Job setup incomplete, Aborting
%s
E28411
v_dialer\dialer\src\core\caller.c
%s - Unknown message: %s,
%s, %s
E28412
v_dialer\dialer\src\core\caller.c
%s - Not an inbound capable
system
E28413
%s - Failed to setup hunt group
E28414
%s - Invalid hunt group
Maintenance and Troubleshooting Guide
March 2008
307
308
E28415
v_dialer\dialer\src\core\caller.c
%s - Failed to receive a job info
position
E28416
v_dialer\dialer\src\core\caller.c
%s - FATAL_ERROR: %s
E28417
v_dialer\dialer\src\core\listops.c
%s - Record length greater
than %d
E28418
v_dialer\dialer\src\core\listops.c
%s - Failed on verifying assoc.
list
E28419
v_dialer\dialer\src\core\listops.c
%s - Failed on reading assoc.
list
E28420
v_dialer\dialer\src\core\listops.c
%s - Master calling list error
E28421
v_dialer\dialer\src\core\listops.c
%s - Invalid strategy: %s
E28422
v_dialer\dialer\src\core\listops.c
%s - Failed to table strategy
file: %s
E28423
v_dialer\dialer\src\core\listops.c
%s - Index file not created with
calling list %s
E28424
v_dialer\dialer\src\core\listops.c
%s - Exceeded record slots
available,PORTCOEF may be
low
E28425
v_dialer\dialer\src\core\listops.c
%s(%s) - Record number
returned invalid %d
E28426
v_dialer\dialer\src\core\listops.c
%s(%s) - Record number
returned wrong %d, job number
%d
E28427
v_dialer\dialer\src\core\listops.c
Failed to attach to semaphore
E28428
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\DialerCmdCtrl\
ErrorHandling_utest.cpp
Failed to read selection criteria
file:%s
E28429
v_dialer\dialer\src\core\caller.c
%s - Call cancel is not
permitted
E28430
v_dialer\dialer\src\core\caller.c
Job linking is not permitted
E28431
v_dialer\dialer\src\core\job_strter.c
ERROR: EDTFILE not
specified in job file %s
E28432
v_dialer\dialer\src\core\job_strter.c
ERROR: Failed to fork job %s
(error=%d)
E28433
v_dialer\dialer\src\core\job_strter.c
ERROR: Failed to exec job %s
Maintenance and Troubleshooting Guide
March 2008
E28434
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\job_strter.c
ERROR: Failed to invoke wait
for job %s (error=%d)
E28435
v_dialer\dialer\src\core\job_strter.c
Next job %s started
E28436
v_dialer\dialer\src\core\job_strter.c
Next job %s error: %s
E28437
v_dialer\dialer\src\core\job_strter.c
Next job %s terminated by
signal %d
E28438
v_dialer\dialer\src\core\job_strter.c
Next job %s stopped by signal
%d
E28439
v_dialer\dialer\src\core\caller.c
ERROR: Next job %s already
starting up.
E28440
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\caller.c
Caller(launch_posttrans) Failed to invoke function fork,
err=%d
E28441
v_dialer\dialer\src\core\caller.c
Caller(launch_posttrans) Failed to invoke function rtprio,
err=%d
E28442
v_dialer\dialer\src\core\caller.c
Caller(launch_posttrans) Failed to invoke function pipe,
err=%d
E28443
v_dialer\dialer\src\core\listops.c
%s - Failed to create calling
script %s
E28444
E28445
Caller - Failed to get port
matching label %s N%s
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\joblib.c
E28446
%s - Failed to terminate proc
%d for Agent %s
caller:fail to send %s to %s
E28447
v_dialer\dialer\src\core\caller.c
caller:fail to get
shadowjobname
E28448
v_dialer\dialer\src\core\caller.c
Job(%s) '%s' sent to a non
shadow job
E28449
v_dialer\dialer\src\core\caller.c
Caller - PostTrans:Failed to
exec prog '%s'
E28450
v_dialer\dialer\src\core\listops.c
Caller - %s (R%d) (N%s)
E28451
v_dialer\dialer\src\core\listops.c
Job(%s):%s: no available line
E28452
v_dialer\dialer\src\core\listops.c
Job(%s):%s: no available
record slot
Maintenance and Troubleshooting Guide
March 2008
309
E28453
v_dialer\dialer\src\core\listops.c
Job(%s):%s:No recall found in
queue
E28454
v_dialer\dialer\src\core\listops.c
Job(%s):%s:Invalid phone for
this recall, rec_slot=%d
E28455
v_dialer\dialer\src\core\listops.c
Job(%s):%s:Same record
(%d)is opened
E28456
v_dialer\dialer\src\core\listops.c
Job(%s):%s:Record %d is
locked
E28457
v_dialer\dialer\src\core\listops.c
Job(%s):%s:Failed to read
record %d
E28458
v_dialer\dialer\src\core\listops.c
Job(%s)::Failed to get phone
number:%s
E28459
v_dialer\dialer\src\core\listops.c
Job(%s)!get_ft_sort_key!clread
error rec_num=%d
E28460
v_dialer\dialer\src\core\listops.c
Job(%s):PostTrans:Failed to
write pipe, recnum = %d, errno
= %d
E28461
v_dialer\dialer\src\core\listops.c
Listops(pvrs_record_load) Record number transferred is
bad (%d)
E28462
v_dialer\dialer\src\core\listops.c
Preview Empty Record with
Multi Units is not allowed.
E28463
v_dialer\dialer\src\core\port_hndle.c
Caller - RTSTATS is YES but
failed to get operstats_base
and/or job_stats_base
E28464
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
Invalid name (%s) for IVR pool
job
E28465
310
Data process label '%s' for job
'%s' missing/invalid
E28600
v_dialer\dialer\src\core\porter.c
%s - Invalid port number
assigned
E28601
v_dialer\dialer\src\core\porter.c
Porter %d - Line inoperable
E28602
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\utility\list_status.c
v_dialer\dialer\enforcer\src\enforcer.cpp
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\core\recall_rmp.c
%s - Failed to setup input IPC.
Maintenance and Troubleshooting Guide
March 2008
E28603
v_dialer\dialer\src\core\
agent_misc_util.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\core\port_hndle.c
v_dialer\dialer\src\core\portevent.c
v_dialer\dialer\src\core\porter.c
%s - Failed to setup conn_mgr
IPC.
E28604
Failed on inbound list def. %s
E28605
Failed on outbound list def. %s
E28606
v_dialer\dialer\src\core\scripter.c
No extension number for the
IVR to dial
E28607
v_dialer\dialer\src\core\scripter.c
No ring command for IVR to run
an application
E28608
v_dialer\dialer\src\core\scripter.c
HOOKIVR: No dial tone from
PBX
E28609
v_dialer\dialer\src\core\scripter.c
%s - Preview failed to find
agent %s
E28610
%s - Mdial failed to find agent
%s
E28611
v_dialer\dialer\src\core\scripter.c
Not allowed in wait
E28612
v_dialer\dialer\src\core\scripter.c
Request out of sequence
E28613
v_dialer\dialer\src\core\scripter.c
Missing preview
E28614
v_dialer\dialer\src\core\scripter.c
Second transaction
E28615
No text in script
E28616
v_dialer\library\libdsi\src\script_lng.c
Script missing label %s
E28617
v_dialer\dialer\src\core\listops.c
Op keys missing label %s
E28618
v_dialer\dialer\src\core\listops.c
Job - Data script %s label
missing
E28619
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Job - Inbound script label %s
missing/invalid
E28620
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\listops.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Job - Outbound script label for
call %s missing/invalid
Maintenance and Troubleshooting Guide
March 2008
311
E28621
Failed to set DAA type:
E28622
Failed to set country code:
E28623
Porter %d failed to busy-out
line
E28624
Porter %d abandoned inbound
call
E28625
Failed to set DAA type: %d,
Porter%d, %d
E28626
v_dialer\dialer\src\core\porter.c
Porter %d: Line Fail:
E28627
v_dialer\dialer\src\core\porter.c
%s - Invalid line class %c
E28628
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\core\scripter.c
Transfer failed, try again later
E28629
v_dialer\dialer\src\core\scripter.c
No agent available, try again
later
E28630
v_dialer\dialer\src\core\scripter.c
NO DIAL TONE
E28631
v_dialer\dialer\src\core\scripter.c
M %d > MAX
E28632
v_dialer\dialer\src\core\scripter.c
M %d < MIN
E28633
v_dialer\dialer\src\core\scripter.c
Porter - bld_dspmesg:message
too long for internal buffer
E28634
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Job - Transfer Wait Queue
script label %s missing/invalid
E28800
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Recall can't be less than %d
minutes
E28801
v_dialer\dialer\src\core\screen.c
Record is busy
E28802
v_dialer\dialer\src\core\screen.c
Recall not allowed for inbound
call
E28803
E28804
312
Transfer setup failed
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Maintenance and Troubleshooting Guide
Job %s not running
March 2008
E28805
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Job %s not ready - Log on later
E28806
%s - Failed to find job name %s
in data seg
E28807
Agent number (%d) invalid
E28808
Headset (%s) not specified in
%s file
E28809
%s not specified in switch.cfg
file
E28810
Duplicate headset ID (%d)
already in use by agent %s
E28811
Duplicate headset ID (%d)
already in use
E28812
v_dialer\dialer\src\core\
agent_misc_util.c
v_dialer\dialer\src\core\operator.c
Agent %s logged in Already Access Denied
E28813
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Maximum %s agent limit
reached
E28814
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Managed agents are not
permitted on this job
E28815
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Sales verification with unit work
lists is not permitted
E28816
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Inbound agents only permitted
E28817
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Outbound agents only
permitted
E28818
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Outbound or Managed agents
only permitted
E28819
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Only outbound agents
permitted by sales verification
E28820
v_dialer\dialer\src\core\operator.c
Unit value not found, or
unavailable
E28821
v_dialer\dialer\src\core\screen.c
Cannot be DONE from
alternate screen
Maintenance and Troubleshooting Guide
March 2008
313
E28822
v_dialer\dialer\src\core\screen.c
E28823
314
Line not released
Failed to save record
E28824
v_dialer\dialer\src\core\screen.c
Changes to record not saved
E28825
v_dialer\dialer\src\core\screen.c
Record not found
E28826
v_dialer\dialer\src\core\screen.c
Record is no longer available
E28827
v_dialer\dialer\src\core\screen.c
Failed to unlock record
E28828
v_dialer\dialer\src\core\screen.c
v_dialer\dialer\src\utility\shmon.c
Unknown screen type
E28829
v_dialer\dialer\src\core\screen.c
Field entry is required
E28830
v_dialer\dialer\src\core\screen.c
Field value not in acceptable
list
E28831
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Field has non-numeric value
E28832
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
%s doesn't match %s format
E28833
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid month in date
E28834
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid year in date
E28835
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid day in date
E28836
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid format character found
E28837
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid hour in time
E28838
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid minute in time
E28839
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid second in time
E28840
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Time is not in correct format
E28841
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid phone
Maintenance and Troubleshooting Guide
March 2008
E28842
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid phonestat - %c
E28843
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid phone number - %s
E28844
v_dialer\dialer\src\core\screen.c
No REL_DIST setting
E28845
v_dialer\dialer\src\core\screen.c
No REL_TME setting
E28846
v_dialer\dialer\src\core\screen.c
No DONE_TME setting
E28847
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Date is before the current date
E28848
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Recall time and date outside
timezone
E28849
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
%s - Record's timezone is
unknown
E28850
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\screen.c
ERROR: Cannot open channel
to operator monitor process
E28851
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\screen.c
ERROR: Operator monitor
process does not respond
E28852
ERROR: HEADSET IS NOT
ACTIVE
E28853
Error sending digits to switch
E28854
DIALDIGIT Customer
Hangup(%d)
E28855
DIALDIGIT Dial Error=%d
E28856
v_dialer\dialer\src\core\screen.c
E28857
ERROR: Invalid response from
operator monitor process
Feature only available for
DIGITAL switch
E28858
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\operator.c
%s - Exceeded operator slots
available,MAXOPS is low
E28859
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\operator.c
%s(%s) - Operator number
returned invalid %d
Maintenance and Troubleshooting Guide
March 2008
315
316
E28860
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
%s(%s) - Operator number
returned wrong %d, job number
%d
E28861
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\operator.c
Operator slot semaphore not
available
E28862
v_dialer\dialer\src\core\agent.c
FATAL ERROR ON SELECT %d
E28863
v_dialer\dialer\src\core\agent.c
ERROR - Unknown file
descriptor
E28864
v_dialer\dialer\src\core\agent_io_util.c
v_dialer\dialer\src\core\job_strter.c
Unknown IPC message - %s
E28865
v_dialer\dialer\src\core\agent_io_util.c
Unknown Command message %s
E28866
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\screen.c
Telephone line not available
E28867
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\agent_tdss_util.c
Telephone line not offhook
E28868
v_dialer\dialer\src\core\agent.c
Callbacks are not permitted on
inbound calls
E28869
v_dialer\dialer\src\core\agent.c
Headset volume must be in the
range of 1 to 8
E28870
v_dialer\dialer\src\core\agent_hs_util.c
Reserve headset id request
pending
E28871
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
Invalid headset id - %s, %s
E28872
v_dialer\dialer\src\core\agent_hs_util.c
Headset already connected
E28873
v_dialer\dialer\src\core\agent_hs_util.c
Headset ID not reserved nor
validated
E28874
v_dialer\dialer\src\core\agent_hs_util.c
Connect headset request
pending
E28875
v_dialer\dialer\src\core\agent_hs_util.c
No headset connect request
pending
Maintenance and Troubleshooting Guide
March 2008
E28876
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
Headset not connected
E28877
v_dialer\dialer\src\core\agent_hs_util.c
Disconnect headset request
pending
E28878
No headset disconnect request
pending
E28879
Headset not disconnected
E28880
v_dialer\dialer\src\core\agent_hs_util.c
Headset connection broken
E28881
v_dialer\dialer\src\core\agent_hs_util.c
Headset connection
re-connected
E28882
v_dialer\dialer\src\core\agent.c
Already available for work Cannot change class
E28883
v_dialer\dialer\src\core\agent.c
Invalid work class
E28884
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\
agent_misc_util.c
Not attached to data shared
memory
E28885
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\
agent_misc_util.c
v_dialer\dialer\src\core\agent_pvrs_util.c
Not attached to a job
E28886
v_dialer\dialer\src\core\agent.c
Unit work lists are not permitted
on this job
E28887
v_dialer\dialer\src\core\agent.c
Already available for work Cannot change unit id
E28888
v_dialer\dialer\src\core\agent.c
Unit id not found
E28889
v_dialer\dialer\src\core\agent.c
Attached to a job already - Must
detach first
E28890
v_dialer\dialer\src\core\agent.c
Failure to open job %s
resource file
E28891
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\
agent_misc_util.c
Must specify INBOUND or
OUTBOUND operation
E28892
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\
agent_misc_util.c
No inbound calling list fields
available
Maintenance and Troubleshooting Guide
March 2008
317
318
E28893
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\
agent_misc_util.c
No outbound calling list fields
available
E28894
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\
agent_misc_util.c
Field name not found
E28895
v_dialer\dialer\src\core\agent.c
Already available for work
E28896
v_dialer\dialer\src\core\agent.c
Headset must be active
E28897
v_dialer\dialer\src\core\agent.c
Available for work request
pending
E28898
v_dialer\dialer\src\core\agent.c
Job not available
E28899
v_dialer\dialer\src\core\agent.c
No available for work request
pending
E28900
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\
agent_misc_util.c
v_dialer\dialer\src\core\agent_hs_util.c
Wrong message id received %s
E28901
v_dialer\dialer\src\core\agent.c
Not available for work
E28902
v_dialer\dialer\src\core\agent.c
Already on work item
E28903
v_dialer\dialer\src\core\agent.c
Already set ready for next work
item
E28904
v_dialer\dialer\src\core\agent.c
Request for no further work
pending
E28905
v_dialer\dialer\src\core\agent.c
Request to transfer to another
job is active
E28906
v_dialer\dialer\src\core\agent.c
Not ready for next work item
E28907
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_pvrs_util.c
Not a managed dialing job
E28908
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_pvrs_util.c
Not on work item
E28909
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_pvrs_util.c
Managed call already complete
E28910
v_dialer\dialer\src\core\agent.c
Managed call cancelled or
complete
E28911
v_dialer\dialer\src\core\agent.c
Managed call cancelled
Maintenance and Troubleshooting Guide
March 2008
E28912
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\
agent_misc_util.c
Data record not available for
update
E28913
v_dialer\dialer\src\core\agent.c
No job attached
E28914
v_dialer\dialer\src\core\agent.c
Still available for work on the
job
E28915
v_dialer\dialer\src\core\agent.c
Not logged off job yet
E28916
v_dialer\dialer\src\core\
agent_misc_util.c
Job attached - Must detach first
E28917
v_dialer\dialer\src\core\agent.c
No job attached
E28918
v_dialer\dialer\src\core\agent.c
Not avail for work on the job
E28919
v_dialer\dialer\src\core\agent.c
Not currently assigned to a
work item
E28920
v_dialer\dialer\src\core\agent_hs_util.c
Headset ID not found in
reserved list - %s
E28921
v_dialer\dialer\src\core\
agent_misc_util.c
FATAL ERROR ABORTING
E28922
v_dialer\dialer\src\core\agent_hs_util.c
No reserve headset id request
pending
E28923
v_dialer\dialer\src\core\agent_hs_util.c
Headset ID - %s already
reserved
E28924
v_dialer\dialer\src\core\agent_io_util.c
Must sign on system first
E28925
v_dialer\dialer\src\core\
agent_misc_util.c
Already signed on the system
E28926
v_dialer\dialer\src\core\
agent_misc_util.c
Invalid sign on
E28927
v_dialer\dialer\src\core\agent.c
Agent - Unable to open
command input socket errno:%d
E28928
v_dialer\dialer\src\core\agent.c
Agent - Unable to find agent
service entry in /etc/services
E28929
v_dialer\dialer\src\core\agent.c
Agent - Unable to bind to local
address - errno:%d
E28930
v_dialer\dialer\src\core\agent.c
Agent - Unable to setup listen
on socket - errno:%d
E28931
v_dialer\dialer\src\core\agent.c
Agent - Fork of process failed errno:%d
Maintenance and Troubleshooting Guide
March 2008
319
320
E28932
v_dialer\dialer\src\core\agent.c
Agent - Accept socket
connection call failed errno:%d
E28933
v_dialer\dialer\src\core\agent_io_util.c
Agent - Read error on client
command socket - count:%d,
errno:%d
E28934
v_dialer\dialer\src\core\agent_io_util.c
Agent - Send error on client
command socket - errno:%d
E28935
v_dialer\dialer\src\core\
agent_misc_util.c
Agent - Parent process exiting
E28936
v_dialer\dialer\src\core\agent.c
Agent - Setting of linger failed errno:%d
E28937
v_dialer\dialer\src\core\operator.c
%s agent is not allowed
E28938
v_dialer\dialer\src\core\api_jobctl.c
Invalid phone type
E28940
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\transfer.c
Operator - data_synced
timeout, data may not be
updated
E28942
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\screen.c
Job %s is not available
E28943
v_dialer\dialer\src\core\screen.c
Invalid key
E28944
v_dialer\dialer\src\core\screen.c
COLONS(:) NOT ALLOWED IN
PHONE FIELD
E28945
v_dialer\dialer\src\core\operator.c
Managed agents only permitted
E28946
v_dialer\dialer\src\core\agent.c
Agent not acquired yet
E28947
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Invalid call completion code %s
E28948
v_dialer\dialer\src\core\joblib.c
Jobmon found incorrect PID
%d when releasing opslot %d
E28949
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Unable to mark as DO NOT
CALL
E28950
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
Extension not in database
E28951
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
Extension in use
E28952
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
Cannot add agent
Maintenance and Troubleshooting Guide
March 2008
E28953
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
Acd_ext file read failed
E28954
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
Duplicate login - please try
again
E28955
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
DNC cannot find key field %s
E28956
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
ACD Login Error
E28957
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Unable to mark other calling
lists
E28958
v_dialer\dialer\src\core\donotcall.c
Do Not Call group '%s' not
defined
E28959
v_dialer\dialer\src\core\operator.c
Invalid Agent Type
E28960
v_dialer\dialer\src\core\dnc_mark.c
HASH key %s not defined in
calling list %s
E28961
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\operator.c
Invalid Jobname
E28962
v_dialer\dialer\src\core\operator.c
ERROR - Unknown file
descriptor
E28963
v_dialer\dialer\src\core\screen.c
ZONEPHONE%d field not set
E28964
v_dialer\dialer\src\core\agent.c
Agent phone is busy. Release
phone line before proceeding.
E28965
v_dialer\dialer\src\core\agent.c
Softdialer link is down. Please
wait until the link is up.
E28966
v_dialer\dialer\src\core\operator.c
Invalid headset ID
E28967
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\core\screen.c
Agent is not allowed to logoff
E28968
v_dialer\dialer\src\core\operator.c
Failed to register with
dispatcher
E28969
v_dialer\dialer\src\core\agent_pvrs_util.c
Operator - init_op_cntrl()
invoked with NULL curr_op_ptr
E28970
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\operator.c
Error queuing jobname data in
list_running_jobs
Maintenance and Troubleshooting Guide
March 2008
321
322
E28971
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\oper_pvrs.c
v_dialer\dialer\src\core\screen.c
Operator - cannot access job
resource file
E28972
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\oper_pvrs.c
v_dialer\dialer\src\core\screen.c
Operator - Timed out while
waiting for job resouce file
E28973
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\oper_pvrs.c
v_dialer\dialer\src\core\screen.c
Operator - Cannot setup screen
'%s'.
E28974
v_dialer\dialer\src\core\agent_pvrs_util.c
v_dialer\dialer\src\core\screen.c
Operator - cannot read screen
map - %s:%s
E28975
v_dialer\dialer\src\core\screen.c
Cannot search when
previewing a recall
E28976
v_dialer\dialer\src\core\screen.c
Cannot dial from deleted record
E28977
v_dialer\dialer\src\core\operator.c
Operator - Failed to initialize
signal %s(%d)
E28978
v_dialer\dialer\src\core\operator.c
Operator - Failed to ignore
signal %s(%d)
E28979
v_dialer\dialer\src\core\screen.c
Operator - Failed to enable
auto release SIGUSR1 handler
E28980
v_dialer\dialer\src\core\screen.c
Operator - Failed to disable
auto release SIGUSR1 handler
E28981
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
Invalid format for %s for job %s
E28982
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\screen.c
Managed call cannot be
cancelled
E28983
v_dialer\dialer\src\core\agent.c
AGTNoFurtherWork is already
in progress
E28984
v_dialer\dialer\src\core\agent.c
Agent is being released to ACD
inbound
E29000
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\api_jobctl.c
Managed dialing capable jobs
only
E29001
v_dialer\dialer\src\core\api_jobctl.c
Jobmon - Failed on startup
E29002
v_dialer\dialer\src\core\api_jobctl.c
Jobmon - Failed to Setup
Windows
Maintenance and Troubleshooting Guide
March 2008
E29006
v_dialer\dialer\src\core\api_jobctl.c
Job '%s' not running
E29007
Job not ready, waiting %d
seconds...
E29008
Job not Ready - Logon later
E29009
v_dialer\dialer\src\core\api_jobctl.c
Outbound capable jobs only
E29010
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\joblib.c
Inbound capable jobs only
E29011
v_dialer\dialer\src\core\api_jobctl.c
Not a multi-unit job
E29012
v_dialer\dialer\src\core\api_jobctl.c
May only monitor Inbound
E29013
v_dialer\dialer\src\core\api_jobctl.c
Invalid number entered
E29014
v_dialer\dialer\src\core\api_jobctl.c
Monitoring of phone line
disabled
E29015
v_dialer\dialer\src\core\api_jobctl.c
Monitoring of agent disabled
E29016
v_dialer\dialer\src\core\api_jobctl.c
Invalid port for monitoring
agents
E29017
v_dialer\dialer\src\core\api_jobctl.c
Agent being monitored
E29018
v_dialer\dialer\src\core\joblib.c
No jobs currently running.
E29019
v_dialer\dialer\src\core\api_jobctl.c
Error multiple job entrys in
SHM
E29020
v_dialer\dialer\src\core\api_jobctl.c
No agents having a record
available
E29021
v_dialer\dialer\src\core\api_jobctl.c
Record no longer available
E29022
v_dialer\dialer\src\core\api_jobctl.c
No units currently available
E29023
v_dialer\dialer\src\core\api_jobctl.c
No agents available to be killed
E29024
v_dialer\dialer\src\core\api_jobctl.c
Invalid entry, no changes
saved.
E29025
v_dialer\dialer\src\core\api_jobctl.c
No other jobs currently running.
E29026
v_dialer\dialer\src\core\api_jobctl.c
No agents currently available.
E29027
v_dialer\dialer\src\core\api_jobctl.c
Agent transfer currently being
processed.
E29028
v_dialer\dialer\src\core\api_jobctl.c
Phone line allocation currently
being processed.
E29029
v_dialer\dialer\src\core\api_jobctl.c
No jobs currently linked.
Maintenance and Troubleshooting Guide
March 2008
323
E29030
v_dialer\dialer\src\core\api_jobctl.c
No jobs available for selection.
E29031
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Link Job '%s' already starting
up.
E29032
v_dialer\dialer\src\core\api_jobctl.c
No phone lines currently
acquired
E29033
No request of phone lines
currently pending
E29034
No phone lines of type %s
acquired
E29035
Job linking capable jobs only
E29036
v_dialer\dialer\src\core\joblib.c
Invalid system terminal.
E29037
v_dialer\dialer\src\core\joblib.c
WARNING!!!
E29038
v_dialer\dialer\src\core\joblib.c
May not monitor op/lines
E29039
E29040
Duplicate HEADSET value.
v_dialer\dialer\src\core\api_jobctl.c
E29041
324
Illegal W, Q or U rate setting
Illegal Hit Rate setting
E29042
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\iicb_conf.c
Allow sending 75 characters
E29043
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\iicb_conf.c
jobmon: failed to send %s to
%s
E29044
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\iicb_conf.c
Wrong type %s of message for
job_strter
E29045
v_dialer\dialer\src\core\iicb_conf.c
Invalid data from system for
get_iicb_status
E29046
v_dialer\dialer\src\core\iicb_conf.c
Invalid response for
list_domain
E29047
v_dialer\dialer\src\core\iicb_conf.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Invalid control method
E29048
v_dialer\dialer\src\core\iicb_conf.c
Invalid response for list_group
E29049
v_dialer\dialer\src\core\iicb_conf.c
Invalid response for
get_group_stats
Maintenance and Troubleshooting Guide
March 2008
E29050
v_dialer\dialer\src\core\iicb_conf.c
Resynch agents is not allowed
in the current state
E29051
v_dialer\dialer\src\core\install_ext.c
Unable to create a list of
extensions
E29052
v_dialer\dialer\src\core\install_ext.c
Unable to add extension to list!
E29053
v_dialer\dialer\src\core\install_ext.c
Unable to insert extension
E29054
v_dialer\dialer\src\core\install_ext.c
Entered a duplicate value
E29055
v_dialer\dialer\src\core\install_ext.c
Error getting current pointer
E29056
v_dialer\dialer\src\core\api_jobctl.c
No operator to monitor
E29057
v_dialer\dialer\src\core\api_jobctl.c
Jobmon: Release code %d has
count of %d
E29150
v_dialer\dialer\src\core\beeper.c
%s:failed to %s
E29151
v_dialer\dialer\src\core\beeper.c
Failed to initialize signals
E29152
v_dialer\dialer\src\core\beeper.c
Failed to set SIGALRM handler
E29153
v_dialer\dialer\src\core\beeper.c
BEEPER:unknown message
%s
E29154
v_dialer\dialer\src\core\beeper.c
Beeper - INTERVAL_ZIPTONE
is not set in master.cfg
E29200
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\conn_mgr.c
v_dialer\dialer\src\core\agent_tdss_util.c
%s - Failed to send msg[%s] on
channel %d
E29201
%s - Failed to %s data segment
E29202
%s - Failed to %s unit segment
Maintenance and Troubleshooting Guide
March 2008
325
326
E29203
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\beeper.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\operator.c
v_dialer\ivr\src\ivr_config.c
v_dialer\ivr\src\ivr_conn.c
v_dialer\dialer\src\utility\mem_dump.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\src\core\porter.c
v_dialer\dialer\src\core\recall_rmp.c
v_dialer\dialer\src\utility\shmon.c
%s - Failed to attach data
segment
E29204
v_dialer\dialer\src\core\conn_mgr.c
%s - Failed to create data
segment
E29205
v_dialer\dialer\src\core\listops.c
%s - Failed to create unit
segment
E29206
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\operator.c
%s - Failed to attach unit
segment
E29207
v_dialer\dialer\src\core\screen.c
Invalid number entered
E29208
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\joblib.c
v_dialer\dialer\src\core\driver.c
v_dialer\dialer\src\core\msg_loader.c
%s - Failed to open channel %d
E29210
v_dialer\dialer\src\core\msg_loader.c
%s - Failed to erase voice
message %s
E29212
v_dialer\dialer\src\core\msg_loader.c
%s - Failed to erase all
messages
E29213
v_dialer\dialer\src\core\msg_loader.c
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
%s - MSGNO parameter too
big
E29214
v_dialer\dialer\src\core\msg_loader.c
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
%s - Too many messages to
load
E29400
v_dialer\dialer\src\core\testmsg.c
Unable to find base file for %s
Maintenance and Troubleshooting Guide
March 2008
E29500
v_dialer\dialer\src\core\ao_recall.c
ao_recall: failed to send %s
E29501
v_dialer\dialer\src\core\ao_recall.c
ao_recall: callsel for %s failed
E29502
dialer/src/core/ao_recall.c
ao_recall - cannot retrieve
selection file from '%s'
E29503
dialer/src/core/ao_recall.c
ao_recall - no strategy file in
selection file '%s'
E29505
dialer/src/core/ao_recall.c
Error queuing timeout data in
add_timeout
E29600
Unable to attach to data
segment
E29601
HUNTGRP set incorrectly
E29602
Login code not defined for line
%s
E29603
Could not open channel #%d
E29604
No login dial tone on line #%d
E29605
No dial tone on line #%d
E29606
Unable to dial %s
E29607
Error with line %d
E29608
ACD_login : Signal
Abort:%s(%d)
E29700
v_dialer\dialer\src\core\joblist_ed.c
Invalid Selection Number
E29701
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to open %s for reading
E29702
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to open %s for writing
E29703
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to load job file for agent
%s
E29704
v_dialer\dialer\src\core\ld_joblist.c
Unable to read header in job
file for agent %s
E29705
v_dialer\dialer\src\core\ld_joblist.c
Unable to read job list in job file
for agent %s
E29706
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to write header in job
file for agent %s
Maintenance and Troubleshooting Guide
March 2008
327
328
E29707
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to write job list in job file
for agent %s
E29708
v_dialer\dialer\src\core\operator.c
Job not valid for agent
E29709
v_dialer\dialer\src\core\joblist_ed.c
Agent job list feature not
activated
E29710
v_dialer\dialer\src\core\ld_joblist.c
Invalid line (%s) in
agentjobs.raw; skipping
E29711
v_dialer\dialer\src\core\ld_joblist.c
Invalid header in job file for
agent %s; will recreate
E29712
v_dialer\dialer\src\core\ld_joblist.c
Job name for agent %s too
long; will truncate to %d
characters
E29714
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to load job file for job
chain %s
E29715
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to write header in job
file for job chain %s
E29716
v_dialer\dialer\src\core\joblist_ed.c
Unable to write job list in job file
for job chain %s
E29717
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to read header in job
file for job chain %s
E29718
v_dialer\dialer\src\core\ld_joblist.c
Invalid header in job file for job
chain %s; will recreate
E29719
v_dialer\dialer\src\core\job_strter.c
v_dialer\dialer\src\core\ld_joblist.c
v_dialer\dialer\src\core\joblist_ed.c
Unable to read job list in job file
for job chain %s
E29800
v_dialer\dialer\src\core\chainhandler.c
Job Chain %s does not exist
E29900
v_dialer\dialer\src\core\job_strter.c
Unable to start next job %s
E29901
v_dialer\dialer\src\core\job_strter.c
%s - Chain %s already started.
E29902
v_dialer\dialer\src\core\job_strter.c
%s - Max number of chains
already started.
E29903
v_dialer\dialer\src\core\job_strter.c
Unable to start job %s
E29904
v_dialer\dialer\src\core\job_strter.c
Unable to stop job %s
Maintenance and Troubleshooting Guide
March 2008
E29950
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\agent_tdss_util.c
v_dialer\dialer\src\core\screen.c
Feature not available in
Softdialer Mode
E29951
v_dialer\dialer\src\core\port_hndle.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Specified more than %d line
groups for use on job
E30000
IVR: -- The IVR_REC_LEN is
not defined
E30001
IVR: -- The IVR_HEADER is
not defined
E30002
IVR: -- The signal call failed SIGUSR1
E30003
IVR: -- Cannot open the IVR
read port
E30004
IVR: -- Cannot open the output
file 1.
E30005
IVR: -- Problem with read from
tty port
E30006
IVR: -- Received 15 bad IVR
records1
E30007
IVR: -- Problem writing to
output file
E30008
IVR: -- The signal call failed.
E30009
IVR: -- SIGUSR Cannot open
output file 2.
E30010
IVR: -- SIGUSR Cannot open
output file 1.
E30011
IVR: -- The IVR_TIME_INTVAL
is not defined
E30012
IVR: -- The IVR_NUM_PORTS
is not defined
E30013
IVR: -- Could not exec the
process for child
E30014
IVR: -- Could not fork the child
E30015
IVR: SYSTEM call for
ivr_mk_clist did not return 0
Maintenance and Troubleshooting Guide
March 2008
329
330
E30016
IVR: Could not re-exec the
process for child
E30017
IVR: Tried to restart the child 15
times unsuccessfully
E30018
IVR -- SEVERE ERROR,
IVR_DAEMON HAS DIED.
E30019
IVR: -- System call did not
return 0
E31200
v_dialer\dialer\src\custom\readwrt.c
Null character specified as fill
not allowed
E31400
v_dialer\dialer\src\custom\atohex.c
Not a valid hexadecimal
E32000
v_dialer\dialer\src\dbconst\readtape.c
%s - No backup list file given
E32001
v_dialer\dialer\src\dbconst\readtape.c
%s - File dictionary name
missing
E32002
v_dialer\dialer\src\dbconst\readtape.c
%s - Calling list or file dictionary
name missing
E32003
v_dialer\dialer\src\dbconst\readtape.c
%s - One or both merge file
names missing
E32004
v_dialer\dialer\src\dbconst\readtape.c
%s - Warning: Reached record
limit, additional data not
converted
E32005
v_dialer\dialer\src\dbconst\readtape.c
%s - Invalid calling list name
E32005
v_dialer\dialer\src\dbconst\readtape.c
%s - Mismatch in calling lists
E32006
v_dialer\dialer\src\dbconst\readtape.c
%s - Invalid tape record size
E32007
v_dialer\dialer\src\dbconst\readtape.c
%s - Invalid switch year
parameter (%d), using default
of 70
E32008
v_dialer\dialer\src\dbconst\readtape.c
%s - Rewind failed
E32400
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
%s - System OS ID error
E32401
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Backup device name(s)
missing
E32402
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Calling list name missing
E32403
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Dictionary or configuration
file missing
Maintenance and Troubleshooting Guide
March 2008
E32404
v_dialer\dialer\src\dbconst\readtape.c
v_dialer\dialer\src\dbconst\writetape.c
%s - Bad tape device name:
%s
E32405
v_dialer\dialer\src\dbconst\readtape.c
%s - No backup list file given
E32600
v_dialer\dialer\src\dbconst\moj_conv.c
v_dialer\dialer\DialerCmdCtrl\
VoicemsgCfgTable.cpp
%s - Failed to execute program
'%s' successfully.
E32601
Wrong hexadecimal value
specified with -a option
E32602
v_dialer\dialer\src\dbconst\moj_conv.c
CHARSET parameter in .conf
file must be set to 'ASCII', with
moj_conv program.
E32603
v_dialer\dialer\src\dbconst\moj_conv.c
CHARCASE parameter in .conf
file must be set to 'UPLOW',
with moj_conv program.
E32604
v_dialer\dialer\src\dbconst\moj_conv.c
TAPEDEV parameter in .conf
file must not be the device in /
dev directory.
E32605
v_dialer\dialer\src\dbconst\moj_conv.c
BLKSIZE parameter and
RESIZE parameter are
inconsistent.
E32606
Cannot read Japanese code
control file %s
E32607
v_dialer\dialer\src\dbconst\moj_conv.c
No DBCS conversion table
name in the code control file.
E34000
v_dialer\dialer\src\lettergen\formlet.c
formlet - Error reading record:
%s
E34001
v_dialer\dialer\src\lettergen\formlet.c
Criteria error: %s
E35000
v_dialer\dialer\src\lstextract\ext_data.c
ext_data - Failed to insert new
Calling List header info %s
E35001
v_dialer\dialer\src\lstextract\ext_data.c
ext_data - Invalid new calling
list name
E35002
v_dialer\dialer\src\lstextract\ext_data.c
ext_data - Unable to append calling list fdicts differ
E35200
v_dialer\dialer\src\lstextract\ext_list.c
ext_list - Invalid new calling list
name
E35201
v_dialer\dialer\src\lstextract\ext_list.c
ext_list - Failed to read file
dictionary %s
Maintenance and Troubleshooting Guide
March 2008
331
E36000
v_dialer\dialer\src\dbmaint\record_ed.c
Record_ed: Mark field '%s' not
defined for list '%s'
E36001
v_dialer\dialer\src\dbmaint\record_ed.c
Invalid record number %s
E36002
v_dialer\dialer\src\dbmaint\record_ed.c
Failed to find record number
%d
E36003
v_dialer\dialer\src\dbmaint\record_ed.c
Failed to determine HASH field
%s
E36004
v_dialer\dialer\src\dbmaint\record_ed.c
Failed to find select field %s
E36005
v_dialer\dialer\src\dbmaint\record_ed.c
Failed to find record number
%d
E36006
v_dialer\dialer\src\dbmaint\redit_scrn.c
Record_ed - Could not save
Record %d, Value=%s in List
%s
E36101
v_dialer\dialer\src\dbmaint\rec_update.c
Rec_update - Child process %s
terminated
E36200
v_dialer\dialer\src\dbmaint\redit_scrn.c
Pattern error in field %d
E36201
v_dialer\dialer\src\core\dnc_mark.c
Hash file '%s' (%s) is older than
calling list '%s' (%s), please run
clhash again.
E36202
v_dialer\dialer\src\core\dnc_mark.c
Hash key field length %d does
not match calling list field
length %d
E36203
332
Source calling list of hash file
%s does not match current
calling list %s
E37000
v_dialer\admin\src\createop.c
Error - Failed to load security
files
E37001
v_dialer\admin\src\createop.c
Invalid Name
E37002
v_dialer\admin\src\createop.c
Name already exists or invalid
name
E37003
v_dialer\admin\src\createop.c
Invalid character in Name
E37004
v_dialer\admin\src\createop.c
A password must be
entered:ERROR
E37005
v_dialer\admin\src\createop.c
Login Group is Not Valid
E37006
v_dialer\admin\src\createop.c
ERROR: exceeded valid
number of user
entries[%d].:Invalid,%s:%s:%s:
%s
Maintenance and Troubleshooting Guide
March 2008
E37007
E37008
Createop:%s:Discard:%s:
v_dialer\admin\src\createop.c
E37009
Invalid Name:Duplicate
account
Name already exists:Failed to
add account
E37010
v_dialer\admin\src\createop.c
v_dialer\ivr\src\ivr_config.c
File is locked by another
supervisor, try later!
E37011
v_dialer\admin\src\createop.c
v_dialer\ivr\src\ivr_config.c
Unknown error, try later!
E37012
v_dialer\admin\src\createop.c
No group information is
loaded--%s
E37013
v_dialer\admin\src\createop.c
Fail to read createop.cfg file
E37014
v_dialer\admin\src\createop.c
Current user is not authorized
E37015
v_dialer\admin\src\createop.c
Validate group information
failed
E37016
v_dialer\admin\src\createop.c
Invalid old password, Cannot
add %s
E37017
v_dialer\admin\src\createop.c
Error, cannot add %s
E37018
v_dialer\admin\src\createop.c
Invalid or duplicate user %s
E37019
v_dialer\admin\src\createop.c
Fail to add to ftpusers-> %s
E37020
v_dialer\admin\src\createop.c
Invalid user name length: %s
E37021
v_dialer\admin\src\createop.c
Cannot change owner of %s to
admin
E37022
v_dialer\admin\src\createop.c
Invalid sub-group found in
sub-group string %s of
group.pds file
E37023
v_dialer\admin\src\createop.c
v_dialer\ivr\src\ivr_config.c
Could not setuid(), error = %d
E37024
v_dialer\admin\src\createop.c
v_dialer\ivr\src\ivr_config.c
Could not setgid(), error = %d
E37025
v_dialer\admin\src\createop.c
Have to supply both password
file and vllogin or group file
E37026
v_dialer\admin\src\createop.c
Fail to getpwnam(%s)
E37027
v_dialer\admin\src\createop.c
alter_entry: Fail to do lckpwdf()
Maintenance and Troubleshooting Guide
March 2008
333
E37028
v_dialer\admin\src\createop.c
%s not found in vllogin
E37029
v_dialer\admin\src\createop.c
Fail to enforce new password
for %s
E37030
v_dialer\admin\src\createop.c
DEL_REC: Fail to delete %s
E37031
v_dialer\admin\src\createop.c
EDIT_REC: Fail to modify
account %s
E37032
v_dialer\admin\src\createop.c
Account not found: %s
E37033
Fail to link correct profile for %s
E37034
v_dialer\admin\src\createop.c
Fail to add user %s
E37035
v_dialer\admin\src\createop.c
Missing Password or Menu
fields: %s:%s:%s:%s
E37036
v_dialer\admin\src\createop.c
%s not found in group file
E37037
v_dialer\admin\src\createop.c
WARNING: Reached limit of
MAX_USERS (%d) as set in
createop.cfg file
E37038
v_dialer\admin\src\createop.c
ERROR: Reached limit of
MAX_USERS (%d) as set in
createop.cfg file
E37039
Error - Failed to load existing
user IDs
E37200
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Invalid Expert Calling Ratio
E37201
v_dialer\dialer\src\editor\config_ed.c
Field '%s' not filled in
E37202
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
No Inbound jobs allowed on
this system.
E37203
Number of reserved inbound
lines must be from 1 to %s
E37204
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Invalid call completion code
specified
E37205
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Invalid start or stop time format
E37206
334
Maintenance and Troubleshooting Guide
Invalid Hit Rate
March 2008
E37207
E37208
Invalid paired phone count/type
v_dialer\dialer\src\editor\config_ed.c
HUNTGRP: format error
E37209
No HUNTGRP setting.
E37210
Selection list not available for
use
E37211
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Selection list for job not found
E37212
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
No Verification Selection List
Ready for Job
E37213
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Selection list not created with
this Calling List
E37214
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Number of telephone lines
must be from 1 to 96
E37215
An odd number of telephone
lines is not allowed
E37216
Quota Value less than one
E37217
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
HUNTGRP: format error
E37218
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
There must be a script label for
answer specified
E37219
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Invalid call completion code for
Quota Value %d
E37220
v_dialer\dialer\src\editor\config_ed.c
Quota %d is not OP completion
code
E37221
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
%s field missing from %s
E37222
v_dialer\dialer\src\editor\config_ed.c
Creation date/time error: %s
E37223
v_dialer\dialer\src\editor\config_ed.c
Data Transfer file %s.axfr: %s
not in %s
Maintenance and Troubleshooting Guide
March 2008
335
E37224
v_dialer\dialer\src\editor\config_ed.c
Wrong job for verification editor
E37225
v_dialer\dialer\src\editor\config_ed.c
No editable line found in file:
%s
E37226
v_dialer\dialer\src\editor\config_ed.c
Failed to create link list header
E37227
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
ERROR: Job %s is already
running
E37228
E37229
ERROR: Job file %s already in
use
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37230
336
Failed to find linked job file: %s
Managed dialing job linking is
not permitted
E37231
v_dialer\dialer\src\editor\config_ed.c
Sales verification job linking is
not permitted
E37232
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Job linking is not permitted
E37233
v_dialer\dialer\src\editor\config_ed.c
%s - Unable to start job %s
E37234
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Failed to find Inbound Job
Screen: %s
E37235
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Failed to find Inbound Job Map:
%s
E37236
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Failed to read Inbound List: %s
E37237
v_dialer\dialer\src\editor\config_ed.c
Failed to find MSCRN - Job
screen: %s
E37238
v_dialer\dialer\src\editor\config_ed.c
Failed to find MSCRN - Job
map: %s
E37239
v_dialer\dialer\src\editor\config_ed.c
Number of multi screens does
not match number of multi lists
E37240
v_dialer\dialer\src\editor\config_ed.c
Failed to find ASCRN - Job
screen: %s
Maintenance and Troubleshooting Guide
March 2008
E37241
v_dialer\dialer\src\editor\config_ed.c
Failed to find MSCRN - Job
map: %s
E37242
v_dialer\dialer\src\editor\config_ed.c
Failed to read Assoc List: %s
E37243
v_dialer\dialer\src\editor\config_ed.c
Number of associate screens
does not match number of
associate lists
E37244
v_dialer\dialer\src\editor\config_ed.c
Number of edit fields does not
match number of associate lists
E37245
v_dialer\dialer\src\editor\config_ed.c
%s - %s(err_code=%d)
E37246
v_dialer\dialer\src\editor\config_ed.c
%s(err_code=%d)
E37247
v_dialer\dialer\src\editor\config_ed.c
Unable to clear %s
E37248
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Line type specified already in
use
E37249
v_dialer\dialer\src\editor\config_ed.c
Improper usage
E37250
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
There must be a script label for
call specified
E37251
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Initial Hit Rate out of range
(1-100)
E37252
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Failed to open script file for IVR
ID %s
E37253
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
IVR script name not specified;
required if IVR ID specified
E37254
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Unable to find %s in script file
for IVR ID %s
E37255
Calling list %s is not on local
dialer.
E37256
v_dialer\dialer\src\editor\config_ed.c
Selecting unit to log in to is not
permitted with inbound-only job
E37300
v_dialer\admin\src\termprocess.c
%s: Invalid process ID %d
E37301
v_dialer\admin\src\termprocess.c
termprocess:fail to send signal
message %s
Maintenance and Troubleshooting Guide
March 2008
337
E37400
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
E37401
Failed to save %s file: %s
E37402
v_dialer\dialer\src\editor\config_ed.c
Failed to allocate %s
E37403
v_dialer\dialer\src\editor\config_ed.c
Failed to read %s: %s
E37404
v_dialer\dialer\src\editor\config_ed.c
Number of %s do not match
number of %s
E37405
v_dialer\dialer\src\editor\config_ed.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
%s field missing or incorrect
length
E37500
v_dialer\admin\src\signalit.c
Fail to terminate process %d,
errno %d
E37501
v_dialer\admin\src\signalit.c
Fail to kill process %d, errno
%d
E37502
v_dialer\admin\src\signalit.c
Fail to send SIGUSR1 process
%d, errno %d
E37503
v_dialer\admin\src\signalit.c
Fail to setreuid to (-1, 0)
E37600
v_dialer\dialer\src\utility\agentcount.c
Field #%d not filled in
E37601
v_dialer\dialer\src\editor\master_ed.c
No editable line found in file:
%s
E37602
v_dialer\dialer\src\editor\master_ed.c
Failed to create link list header
E37603
v_dialer\dialer\src\editor\master_ed.c
ERROR: %s already in use
E37604
v_dialer\dialer\src\editor\master_ed.c
Unable to clear %s
E37800
v_dialer\dialer\src\editor\master_ed.c
Groupname %s has invalid
length
E37801
Skeleton path %s for group %s
does not exist
E37802
v_dialer\admin\src\addgroup.c
Could not add group %s
E38000
v_dialer\dialer\src\markrec\chkentdt.c
Chkentdt - Failed to create old
database index
E38001
338
Failed to find %s: %s
Maintenance and Troubleshooting Guide
Chkentdt - Failed to create new
database index
March 2008
E38002
v_dialer\dialer\src\markrec\chkentdt.c
Chkentdt WARNING - cannot
open old database %s.
Assuming none exists
E38003
v_dialer\dialer\src\markrec\chkentdt.c
Chkentdt ERROR:-S option
must be used with -i option
E38004
v_dialer\dialer\src\markrec\chkentdt.c
Chkentdt - Unable to malloc
hash_table
E38400
v_dialer\dialer\src\markrec\latemrk.c
Latemrk - Failed to create
calling list index
E38401
Latemrk - Failed to create late
list index
E38402
v_dialer\dialer\src\markrec\latemrk.c
Latemrk - file error building late
list
E38403
v_dialer\dialer\src\markrec\latemrk.c
Latemrk - field_list - key fields
not the same length
E38404
v_dialer\dialer\src\markrec\latemrk.c
Latemrk - %s recno %d locked;
skipping;
E38405
v_dialer\dialer\src\markrec\latemrk.c
Latemrk - %s '%s' not found in
%s, skipping;
E38406
v_dialer\dialer\src\markrec\latemrk.c
Latemrk - Field '%s' not found
in %s
E38600
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\markrec\set_field.c
%s - Failed to read record: %s
E38601
v_dialer\dialer\src\markrec\set_field.c
%s - Failed to update record:
%s
E38602
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\markrec\set_field.c
%s - Failed to create calling list
search index
E38603
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\markrec\set_field.c
%s - %s '%s' not found in %s.
E38604
v_dialer\dialer\src\markrec\get_field.c
v_dialer\dialer\src\markrec\set_field.c
%s - Valid record range is 1 %d.
E38605
v_dialer\dialer\src\markrec\get_field.c
%s - No records in calling list
E38800
v_dialer\dialer\src\markrec\latelst.c
%s - key fields not the same
length
E38801
Maintenance and Troubleshooting Guide
%s - Key '%s' not found in hash
file
March 2008
339
340
E38802
%s - Error allocating memory
for '%s'
E39000
Failed to find user logon entry
%s in V/L login file
E39001
v_dialer\dialer\src\menu\menu.c
Error _ No Menu Name
E39002
v_dialer\dialer\src\menu\menu.c
Help File Not Found: %s
E39003
v_dialer\dialer\src\menu\menu.c
Menu File Not Found: %s
E39004
v_dialer\dialer\src\menu\menu.c
MENU(%d)Signal Interrupt=%d
E39005
v_dialer\dialer\src\menu\menu.c
%s - User not authorized to run
this menu - %s
E39200
v_dialer\dialer\src\menu\submenu.c
Incorrect Item Number
E39201
v_dialer\dialer\src\menu\submenu.c
Failed to Search Directory for
File Extension: %s
E39202
v_dialer\dialer\src\menu\submenu.c
Invalid list number
E40000
v_dialer\dialer\src\pcextract\brkfile.c
No Calling Statistics Files
Available
E40001
v_dialer\dialer\src\pcextract\brkfile.c
PC Analysis - Reopen of %s
failed
E40002
v_dialer\dialer\src\pcextract\fileops.c
PC Analysis - Invalid File Type
of %c
E40003
v_dialer\dialer\src\pcextract\brkfile.c
No Agent Files Available
E40200
v_dialer\dialer\src\pcextract\fileops.c
Pc Analysis - Unknown Type
%c for Input File type
E40201
v_dialer\dialer\src\pcextract\fileops.c
File Name not Found
E40202
v_dialer\dialer\src\pcextract\fileops.c
File does not Exist
E40203
v_dialer\dialer\src\pcextract\fileops.c
In Help mode, Cannot Select
Criteria
E40204
v_dialer\dialer\src\pcextract\fileops.c
Invalid Field Order Select
Number
E40400
v_dialer\dialer\src\pcextract\msetup.c
%s - Invalid config file name
E40401
v_dialer\dialer\src\pcextract\msetup.c
Invalid Extraction Type
E42000
v_dialer\dialer\src\preprocess\
de_reject.c
-S option must be used with -i
option
Maintenance and Troubleshooting Guide
March 2008
E42100
v_dialer\dialer\src\preprocess\
ij_merge.c
-S option must be used with -i
option
E42101
v_dialer\dialer\src\preprocess\
ij_merge.c
Third argument must be -c
E42400
v_dialer\dialer\src\preprocess\clhashin.c
%s - Failed hash open of %s
E42401
%s - Failed to stat associated
calling list %s
E42402
v_dialer\dialer\src\preprocess\clhashin.c
%s - %s : %s
E42403
v_dialer\dialer\src\preprocess\clhashin.c
%s - Associate list and hash
index date/time do not agree
for %s. Run clhash
E42404
v_dialer\dialer\src\preprocess\clhashin.c
%s - Field %s length %d not
match hash key %s length %d
E42405
v_dialer\dialer\src\preprocess\clhashin.c
Record number %s too big for
field %s
E42406
v_dialer\dialer\src\preprocess\clhashin.c
%s - Record number %s too big
for field %s
E42600
Field undefined in the calling
list
E42601
Gap found between field
names within group
E42602
Missing assigned field values
E42603
Gap found in value selections
E42604
Field value has an invalid
character
E42605
Missing Range or Item
specification in field values
E42606
Values not in ascending order
E42607
No fields selected for reporting
E42608
Miss value in filler criteria
E42609
Miss field name in filler criteria
E42610
Pattern Error: %s
E42611
'ALL' cannot co-exist with other
selections
E42612
Unknown call completion code
Maintenance and Troubleshooting Guide
March 2008
341
342
E42613
%s - Unknown select file %s
E42614
%s - Unknown supplement file
%s
E42615
Invalid code. Type R for row, C
for column or T for table.
E42616
Invalid line number
E42617
Cannot move to same location
E42800
Invalid number indicator: %s
E42801
v_dialer\dialer\src\preprocess\
setzones.c
-S option must be used with -i
option
E43000
v_dialer\dialer\src\preprocess\
update_cl.c
%s - Match field %s length %d
not match associated field %s
length %d
E43001
v_dialer\dialer\src\preprocess\
update_cl.c
Record %d - Bad Record
number in field %s
E43002
v_dialer\dialer\src\preprocess\
update_cl.c
%s - Record %d - Assoc list %s
read error(%d) for record no.
%d
E43200
Record %d - Too many records
in set
E43201
%s - Record %d - Too many
records in set
E43400
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
TERMINAL ERROR
E43401
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
Record %d - READ ERROR
(%d)
E43402
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
Record %d - WRITE ERROR
(%d)
Maintenance and Troubleshooting Guide
March 2008
E43403
v_dialer\dialer\src\preprocess\
update_upl.c
Record %d - HASH ERROR
(%d)
E43404
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\
update_upl.c
%s - Failed hash initialization!
E43405
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
%s - Failed to stat calling list
%s
E43406
v_dialer\dialer\src\preprocess\clhashin.c
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
%s - Record %d - READ
ERROR (%d)
E43407
v_dialer\dialer\src\preprocess\clhash.c
v_dialer\dialer\src\preprocess\
update_upl.c
%s - Record %d - HASH
ERROR (%d)
E43408
v_dialer\dialer\src\preprocess\
update_cl.c
v_dialer\dialer\src\preprocess\
update_upl.c
%s - Record %d - WRITE
ERROR (%d)
E43500
v_dialer\dialer\src\preprocess\
msgmap.c
Calling List %s open error
E43501
v_dialer\dialer\src\preprocess\
msgmap.c
Calling List %s header error
E43502
v_dialer\dialer\src\preprocess\
msgmap.c
Calling List %s definition error
E43503
v_dialer\dialer\src\preprocess\
msgmap.c
Field name %s missing in
Calling List %s
E43504
v_dialer\dialer\src\preprocess\
msgmap.c
Error initializing LISTS hash file
%s
E43505
v_dialer\dialer\src\preprocess\
msgmap.c
Error hashing record %d in
Calling List %s. Errcode = %d
E43506
v_dialer\dialer\src\preprocess\
msgmap.c
Error writing hash record %d in
hash file %s. Errcode = %d
E43507
v_dialer\dialer\src\preprocess\
msgmap.c
System_value %d too big.
Limit is MAXMSGS
E43508
Maintenance and Troubleshooting Guide
Record %d - READ ERROR
March 2008
343
344
E43509
v_dialer\dialer\src\preprocess\
msgmap.c
Record %d - WRITE ERROR
E43510
v_dialer\dialer\src\preprocess\
msgmap.c
Record %d - CALLING LIST
BUFFER MALLOC ERROR
E43511
v_dialer\dialer\src\preprocess\
msgmap.c
Error: colon missing on line
%s:%s
E43512
dialer\src\preprocess\msgmap.c
%s:%s, Field name %s missing
in Calling List %s
E44000
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Bad arguments
E44001
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Memory allocation error
E44002
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - File access error
E44003
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Equation syntax error
E44004
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Invalid format code
E44005
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Report configuration error
E44006
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - No HISTORY variable in
master.cfg
E44007
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - History dictionary error
E44008
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Incorrect sort field name
E44009
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Failed to open report
format file
E44010
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Failed to write output
report file
E44011
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - No record selection
criteria given
E44012
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Failed to open input file
E44013
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - Failed to set/reset record
lock
E44014
v_dialer\dialer\src\reports\history\
hist_rpt.c
%s - job and report format type
are not compatible
Maintenance and Troubleshooting Guide
March 2008
E45000
E45001
rpt_view - Caught signal %d
and terminated
v_dialer\dialer\src\reports\rpt_mgr\
rpt_view.c
Incorrect Report Number
E45200
File name for view missing
E45201
pds_view - Caught signal %d
and terminated
E45202
v_dialer\dialer\src\reports\rpt_mgr\
pds_view.c
REPORT %s NOT FOUND
E46200
v_dialer\dialer\src\reports\reportgen\
reportexp.c
v_dialer\dialer\src\reports\reportgen\
reportsub.c
Invalid line number
E46201
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Exceeded maximum number of
expressions
E46202
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Invalid PAGE flag
E46203
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Invalid RESET flag
E46204
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Missing expression name
E46205
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Unknown operator: %s
E46206
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Missing operator
E46207
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Too many operands for
operator '%s'
E46208
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Missing operand for operator
'%s'
E46209
v_dialer\dialer\src\reports\reportgen\
reportexp.c
%s is undefined in the printcap
file
E46210
v_dialer\dialer\src\reports\reportgen\
reportexp.c
v_dialer\dialer\src\reports\reportgen\
reportsub.c
v_dialer\dialer\src\reports\reportgen\
reportsel.c
v_dialer\dialer\src\reports\reportgen\
reportprn.c
%s is undefined in the
dictionary
Maintenance and Troubleshooting Guide
March 2008
345
346
E46211
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Unknown variable name %s
E46212
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Unmatching ' in literal string %s
E46213
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Unknown data type: %s
E46214
v_dialer\dialer\src\reports\reportgen\
reportexp.c
Invalid data type for operator
%s
E46400
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
No expression located at cursor
position
E46401
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Insufficient memory for screen
buffer allocation
E46402
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
End of file reached
E46403
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
No lines in buffer
E46404
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Invalid starting location expression overlap
E46405
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Invalid ending location expression overlap
E46406
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Must specify start location
E46407
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Invalid ending location
E46408
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Exceeded maximum report
dimensions
E46409
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Failed to open format temp file
E46410
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Invalid line marker at line %d
E46411
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Invalid starting location
E46412
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
Invalid ending location
E46600
v_dialer\dialer\src\reports\reportgen\
reporthlp.c
No entries in printcap file
E46601
v_dialer\dialer\src\reports\reportgen\
reporthlp.c
No entries in file dictionary
Maintenance and Troubleshooting Guide
March 2008
E46602
v_dialer\dialer\src\reports\reportgen\
reporthlp.c
No expressions defined in file
E46603
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Failed to open report list file
E46800
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Failed to list defined printer
model names
E46801
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Failed to read printcap file
E46802
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Unknown printer model
E46803
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Report -
E46804
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Failed to get defn. for calling list
E46805
v_dialer\dialer\src\reports\reportgen\
reportinit.c
File name missing
E46806
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Failed to open text substitution
file
E46807
v_dialer\dialer\src\reports\rptgen\
reportconvert.c
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\reports\reportgen\
reportconvert_prev.c
Report control file name too
long
E46808
v_dialer\dialer\src\reports\rptgen\
reportconvert.c
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\reports\reportgen\
reportconvert_prev.c
Failed to write report control file
E46809
v_dialer\dialer\src\reports\reportgen\
reportinit.c
Failed to read report help file
E46810
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\reports\reportgen\
reportconvert_prev.c
v_dialer\dialer\src\reports\rptgen\
reportconvert.c
Failed to open report control
file: %s
Maintenance and Troubleshooting Guide
March 2008
347
E46811
v_dialer\dialer\src\reports\reportgen\
reportinit.c
v_dialer\dialer\src\reports\reportgen\
reportconvert_prev.c
v_dialer\dialer\src\reports\rptgen\
reportconvert.c
E47000
Failed to initialize
E47001
v_dialer\dialer\src\scrnbld\scrnbld.c
Failed to read command keys
file
E47002
v_dialer\dialer\src\scrnbld\scrnbld.c
Terminal Screen too small for
screen editor.
E47003
v_dialer\dialer\src\scrnbld\scrnbld.c
May not shift fields further
E47004
v_dialer\dialer\src\scrnbld\scrnbld.c
Only Date, Time, or Numeric
fields may have Verification
Formats
E47005
v_dialer\dialer\src\scrnbld\scrnbld.c
Field does not fit in screen.
E47006
v_dialer\dialer\src\scrnbld\scrnbld.c
May not overlay screen labels.
E47007
v_dialer\dialer\src\scrnbld\scrnbld.c
May not place fields in column
one.
E47008
v_dialer\dialer\src\scrnbld\scrnbld.c
May not overlap screen fields.
E47009
v_dialer\dialer\src\scrnbld\scrnbld.c
May only edit lists [1..%d]
E47010
v_dialer\dialer\src\scrnbld\scrnbld.c
%s(ScreenBuilder) - Failed to
open output report file
E47011
348
Unknown report control file: %s
May not change to the same
file dictionary.
E47012
v_dialer\dialer\src\scrnbld\scrnbld.c
No Jobs available
E47013
v_dialer\dialer\src\scrnbld\scrnbld.c
No jobs use the current screen
E47014
v_dialer\dialer\src\scrnbld\scrnbld.c
Screen does not exist:
E47015
v_dialer\dialer\src\scrnbld\scrnbld.c
No changes made.
E47016
UNFINISHED COMMAND:
TESTMODE
E47017
Invalid %s number
specified=%d.
E47018
Cut & Paste Field Not %s
Maintenance and Troubleshooting Guide
March 2008
E47019
v_dialer\dialer\src\scrnbld\sbld_block.c
You may not PASTE over
fields.
E47020
v_dialer\dialer\src\scrnbld\sbld_block.c
Fields may not start in column
one.
E47021
v_dialer\dialer\src\scrnbld\sbld_block.c
Field in block does not fit on
screen.
E47022
v_dialer\dialer\src\scrnbld\sbld_block.c
Fields may not overlap.
E47023
v_dialer\dialer\src\scrnbld\sbld_block.c
Block must fit on screen.
E47024
v_dialer\dialer\src\scrnbld\sbld_block.c
Field[%s,%d] does not match
dictionary.
E47025
v_dialer\dialer\src\scrnbld\scrnbld.c
Not enough menu options
E47026
v_dialer\dialer\src\scrnbld\scrnbld.c
ERROR: no screen open
E47027
v_dialer\dialer\src\scrnbld\scrnbld.c
Failed to write screen file
E47028
v_dialer\dialer\src\scrnbld\scrnbld.c
Save to a different name.
E47029
You may not %s the current
edit screen.
E47030
v_dialer\dialer\src\scrnbld\scrnbld.c
NO HELP TABLE
E47031
v_dialer\dialer\src\scrnbld\scrnbld.c
Protected file.
E47032
v_dialer\dialer\src\scrnbld\scrnbld.c
Use a different name.
E47033
v_dialer\dialer\src\scrnbld\scrnbld.c
Invalid sequence number
specified=%d.
E47034
v_dialer\dialer\src\scrnbld\scrnbld.c
Invalid field number
specified=%d.
E47035
v_dialer\dialer\src\scrnbld\sbld_block.c
Cut & Paste Field Not Copied
E47036
v_dialer\dialer\src\scrnbld\sbld_block.c
Cut & Paste Field Not Cut, or
Copied
E47037
v_dialer\dialer\src\scrnbld\sbld_block.c
Cut & Paste Field Not Cleared
E47038
v_dialer\dialer\src\scrnbld\scrnbld.c
You may not delete the current
edit screen.
E47039
v_dialer\dialer\src\scrnbld\scrnbld.c
You may not recover the
current edit screen.
E47040
v_dialer\dialer\src\scrnbld\scrnbld.c
Failed to initialize Screen
E47041
Maintenance and Troubleshooting Guide
Failed to initialize Keyboard
March 2008
349
E49001
dialer_library\libcpp\src\Passwd.cpp
Password verification failed for
user: %s, Exception: %s
E50000
v_dialer\dialer\src\utility\adump.c
Data File Not in Calling List
Format
E50100
v_dialer\dialer\src\utility\agentcheck.c
v_dialer\dialer\src\core\
agent_misc_util.c
Exceeded number of %s
agents
E50101
v_dialer\dialer\src\utility\agentcheck.c
Exceeded wait limit for
acceptance
E50200
v_dialer\dialer\src\utility\datetime.c
Invalid time format
E50201
v_dialer\dialer\src\utility\datetime.c
Invalid hour in time
E50202
v_dialer\dialer\src\utility\datetime.c
Invalid minutes in time
E50203
v_dialer\dialer\src\utility\datetime.c
Invalid date format
E50204
v_dialer\dialer\src\utility\datetime.c
Invalid year in date
E50205
v_dialer\dialer\src\utility\datetime.c
Invalid month in date
E50206
v_dialer\dialer\src\utility\datetime.c
Invalid day in date
E50600
v_dialer\dialer\src\utility\enq_pty.c
No Headset ID Specified.
E50601
v_dialer\dialer\src\utility\enq_pty.c
Failed to Initialize Keyboard
E50602
v_dialer\dialer\src\utility\enq_pty.c
Failed to Initialize screen
environment
E50603
v_dialer\dialer\src\utility\enq_pty.c
Failed to create display
window.
E50604
v_dialer\dialer\src\utility\enq_pty.c
Not a pseudo-terminal port
E50605
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
No response from system, login
failed
E50606
Headset ID (%d) Out of Range
(1-%d)
E50607
Failed to select Headset
ID(%d)
E50608
Exceeded retry limits, No valid
headset ID specified
E50609
v_dialer\dialer\src\utility\enq_pty.c
E50610
350
Maintenance and Troubleshooting Guide
Exceeded retry limits, No valid
key code specified
Headset ID (%d) Already in use
by %s
March 2008
E50611
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\utility\enq_pty.c
Headset ID (%s) Already in use
E50612
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\utility\enq_pty.c
No more Headsets permitted
on system
E50613
v_dialer\dialer\src\core\agent_hs_util.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\utility\enq_pty.c
Failure to access Headset
Table
E50800
op_logout: failed to establish
input queue for hs %s
E51001
v_dialer\dialer\src\utility\fdictdump.c
Goodbye...
E51200
v_dialer\dialer\src\utility\jobkeys.c
No information on keys for job
%s
E51201
No such keys file defined
named: %s
E51400
Port_start - Failed to get
VOICEDIR directory
E51600
v_dialer\dialer\src\utility\portcorr.c
No <###tran.stat> files are
marked with todays date
E51601
v_dialer\dialer\src\utility\portcorr.c
Cannot open file chi_data
E52800
v_dialer\dialer\src\utility\ziptoarea.c
Only single zipcode field is
allowed
E52801
v_dialer\dialer\src\utility\ziptoarea.c
Exceeded area code fields limit
of (%d)
E52802
v_dialer\dialer\src\utility\ziptoarea.c
Illegal option -%c
E52803
v_dialer\dialer\src\utility\ziptoarea.c
No main option specified
E52804
v_dialer\dialer\src\utility\ziptoarea.c
'-f' option also require '-a' & '-z'
option
E52805
v_dialer\dialer\src\utility\ziptoarea.c
Bad pattern specified with '-x'
option
E52806
v_dialer\dialer\src\utility\ziptoarea.c
Area code offset can't exceed
%d
E53000
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to open Calling
List '%s'
Maintenance and Troubleshooting Guide
March 2008
351
E53001
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to get List
Definition for '%s'
E53002
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to stat Calling List
'%s'
E53003
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to open Prepare
Check file '%s'. Must run
clhash first.
E53004
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to find correct
entry for '%s' in Prepare Check
file '%s'. Must run clhashin
first.
E53005
v_dialer\dialer\src\utility\copyfields.c
%s - Field '%s' not in Calling
List '%s'
E53006
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to open
Associated Calling List '%s'
E53007
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to stat Associate
List '%s'
E53008
v_dialer\dialer\src\utility\copyfields.c
%s - Field '%s' not in Associate
Calling List '%s'
E53009
v_dialer\dialer\src\utility\copyfields.c
%s - Match field '%s' length %d
not same as associated field
'%s' length %d!
E53010
v_dialer\dialer\src\utility\copyfields.c
%d - READ ERROR (%d)
E53011
v_dialer\dialer\src\utility\copyfields.c
%s - Record %d - READ
ERROR (%d)
E53012
v_dialer\dialer\src\utility\copyfields.c
%d - A READ ERR (%d)
E53013
v_dialer\dialer\src\utility\copyfields.c
%s - Record %d - ASSOC
READ ERROR (%d)
E53014
v_dialer\dialer\src\utility\copyfields.c
%d - WRITE ERROR (%d)
E53015
v_dialer\dialer\src\utility\copyfields.c
%s - Associate Record %d WRITE ERROR (%d)
E53016
v_dialer\dialer\src\utility\copyfields.c
%d BAD RECORDS
E53017
v_dialer\dialer\src\utility\copyfields.c
%s - %d BAD RECORDS
E53018
352
%s - %d BAD RECORDS
E53019
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to open: %s
E53020
v_dialer\dialer\src\utility\copyfields.c
%s - Unknown configuration file
%s
Maintenance and Troubleshooting Guide
March 2008
E53021
v_dialer\dialer\src\utility\copyfields.c
%s - Unable to allocate list
buffer
E53022
v_dialer\dialer\src\utility\copyfields.c
TERMINAL ERROR
E53023
v_dialer\dialer\src\utility\copyfields.c
%s - Usage error
E53650
v_dialer\dialer\src\imon\internetmon.c
compcode.cfg not found
E53651
v_dialer\dialer\src\imon\internetmon.c
INTERNETMONDIR parameter
is missing from master.cfg
E53652
v_dialer\dialer\src\imon\internetmon.c
Internet Monitor shutting down
E53654
v_dialer\dialer\src\imon\internetmon.c
Internet Monitor failed to attach
to shared memory - conn_mgr
may not be running - exiting
E53655
HTML Page update failed remote Web server may no
longer be mounted
E53800
v_dialer\dialer\src\utility\evmon.c
Caught error #%d!
E53801
v_dialer\dialer\src\utility\evmon.c
Error %d writing msg '%s' to log
file [%s].
E53802
v_dialer\dialer\src\utility\evmon.c
Error: Unable to log system
message. Message '%s' not
found.
E53803
v_dialer\library\libdsi\src\script_lng.c
Error: Couldn't open file '%s'
E53804
v_dialer\dialer\src\utility\evmon.c
Error formatting message '%s'.
E53805
v_dialer\dialer\src\utility\evmon.c
Error: Nothing to monitor!
E53806
v_dialer\dialer\src\utility\evmon.c
Error: Unable to open log file
%s for appending.
E53807
v_dialer\dialer\src\utility\evmon.c
Error: Couldn't open log file
[%s]
E53808
v_dialer\library\libdsi\src\script_lng.c
Error: Bad date-time format:
[%s]
E53809
v_dialer\dialer\src\utility\evmon.c
Error: Unable to retrieve
EVMON filespec from
master.cfg
E53810
v_dialer\dialer\src\utility\evmon.c
Error: Config file [%s] was not
found.
E53811
v_dialer\dialer\src\utility\evmon.c
Error: System call auditing is
requested but system is not
trusted
Maintenance and Troubleshooting Guide
March 2008
353
E53812
Error: File %s was not found.
Make sure system auditing is
turned on.
E53813
v_dialer\dialer\src\utility\evmon.c
Error: Couldn't stat [%s]
E53814
v_dialer\dialer\src\utility\evmon.c
Warning: No 'next' audit log
defined.
E53815
v_dialer\dialer\src\utility\evmon.c
Error: Bad update interval value
E53816
v_dialer\dialer\src\utility\evmon.c
Error: Unknown option %c
E53817
v_dialer\dialer\src\utility\evmon.c
Error: Unknown/
unimplemented entry in cfg file
on line %d
E53818
v_dialer\dialer\src\utility\evmon.c
Error: The HP-UX auditing
system is OFF. Please use
SAM to turn it on.
E53819
v_dialer\dialer\src\utility\evmon.c
Error: Audctl failed: errno=%d
E54100
v_dialer\dialer\src\listserver\listserver.c
Unexpected program exit
E54101
v_dialer\dialer\src\listserver\listserver.c
getservbyname ('%s', tcp)
failed
E54102
v_dialer\dialer\src\listserver\listserver.c
socket () failed
E54103
v_dialer\dialer\src\listserver\listserver.c
bind (fd=%d) failed (are clients
still connected to sockets of
previous listserver instance?)
E54104
v_dialer\dialer\src\listserver\listserver.c
listen (fd=%d) failed
E54105
v_dialer\dialer\src\listserver\listserver.c
setsockoopt (fd=%d,
SO_LINGER) failed
E54106
v_dialer\dialer\src\listserver\listserver.c
setsockoopt (fd=%d,
SO_KEEPALIVE) failed
E54107
v_dialer\dialer\src\listserver\listserver.c
accept (fd=%d) failed
E54108
354
Usage error
E54109
v_dialer\dialer\src\listserver\listserver.c
Received signal %d -- exiting
E54110
v_dialer\dialer\src\listserver\listserver.c
FD_ISSET (conn_fd=%d) failed
E54111
v_dialer\dialer\src\listserver\listserver.c
Write error -- exiting
E54112
v_dialer\library\libdsi\src\clutils.c
Read error -- exiting
E54113
v_dialer\dialer\src\listserver\listserver.c
File descriptor too large
(fd=%d) -- exiting
Maintenance and Troubleshooting Guide
March 2008
E54114
v_dialer\dialer\src\listserver\listserver.c
cllstat (fd=%d) failed -- exiting
E54115
v_dialer\dialer\src\listserver\listserver.c
cllrddict (fd=%d) failed -- exiting
E54120
v_dialer\dialer\src\listserver\listserver.c
v_dialer\dialer\DialerCmdCtrl\
VoicemsgCfgTable.cpp
fork failed -- errno=%d '%s'
E54121
v_dialer\dialer\src\listserver\listserver.c
Unable to open list '%s'
E55000
v_dialer\dialer\src\reports\reportgen\
reportprn.c
Insufficient memory for %s
E55001
v_dialer\dialer\src\reports\reportgen\
reportprn.c
Error reading records
E55002
v_dialer\dialer\src\reports\reportgen\
reportprn.c
Failed to open report output file
E55200
v_dialer\dialer\src\reports\reportgen\
reportsel.c
Group may not begin with no
criteria
E55201
v_dialer\dialer\src\reports\reportgen\
reportsel.c
Gap found between select
fields
E55202
v_dialer\dialer\src\reports\reportgen\
reportsel.c
Invalid logical connector
E55203
v_dialer\dialer\src\reports\reportgen\
reportsel.c
Missing field name
E55204
v_dialer\dialer\src\reports\reportgen\
reportsel.c
Missing field value
E55205
v_dialer\dialer\src\reports\reportgen\
reportsel.c
Duplicate field name found
E55206
v_dialer\dialer\src\reports\reportgen\
reportsel.c
Invalid sort directive
E55207
v_dialer\dialer\src\reports\reportgen\
reportsel.c
Error Pattern: %s
E55400
v_dialer\dialer\src\reports\reportgen\
reportsub.c
Failed to write text substitution
file
E55600
v_dialer\dialer\src\reports\reportgen\
reportexp.c
v_dialer\dialer\src\reports\reportgen\
reportsel.c
v_dialer\dialer\src\reports\reportgen\
reportfmt.c
v_dialer\dialer\src\reports\reportgen\
reporthlp.c
Invalid number
Maintenance and Troubleshooting Guide
March 2008
355
356
E55601
v_dialer\dialer\src\reports\reportgen\
reportsub.c
v_dialer\ivr\src\ivr_supr.c
Insufficient memory for %s
E56001
v_dialer\ivr\src\ivr_supr.c
ivr_supr: Error connecting to
socket, errno %d
E56002
v_dialer\ivr\src\ivr_supr.c
ivr_supr: Unknown command
ID:%d
E56003
v_dialer\ivr\src\ivr_supr.c
ivr_supr: IVR_INTEGRATION
not set in master.cfg
E56004
v_dialer\ivr\src\ivr_config.c
Invalid IP address: %s
E56005
v_dialer\ivr\src\ivr_config.c
No host information is
loaded--%s
E56006
v_dialer\ivr\src\ivr_config.c
Error - Failed to load user
interface files
E56007
v_dialer\ivr\src\ivr_config.c
Validation of IVR information
failed
E56008
v_dialer\ivr\src\ivr_config.c
Invalid IVR ID length: %s
E56009
v_dialer\ivr\src\ivr_config.c
IVR ID not found in /etc/hosts
file: %s
E56010
v_dialer\ivr\src\ivr_config.c
IVR ID already exists: %s
E56011
v_dialer\ivr\src\ivr_config.c
Invalid character in IVR ID: %s
E56012
v_dialer\ivr\src\ivr_config.c
An IP address must be entered
E56013
v_dialer\ivr\src\ivr_config.c
Fail to add to /etc/hosts: %s
E56014
v_dialer\ivr\src\ivr_config.c
IVR ID %s not found
E56015
v_dialer\ivr\src\ivr_config.c
Failed to add IVR %s
E56016
v_dialer\ivr\src\ivr_config.c
IVR ID already exists in /etc/
hosts file: %s
E56017
v_dialer\ivr\src\ivr_config.c
Currently connected to IVR %s;
cannot change or delete
configuration
E56018
v_dialer\ivr\src\ivr_config.c
IVR IP address already exists:
%s
E56019
v_dialer\ivr\src\ivr_config.c
IVR IP address already found
in /etc/hosts file: %s
E56020
v_dialer\ivr\src\ivr_conn.c
ivr_conn: ivr_conn service not
found in /etc/services
Maintenance and Troubleshooting Guide
March 2008
E56021
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unable to create
socket, errno %d - %s
E56022
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unable to bind to the
socket, errno %d
E56023
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unable to connect to
the socket, errno %d
E56024
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unable to listen to the
socket, errno %d
E56025
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Error in select, errno
%d
E56026
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Error in accept, errno
%d
E56027
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Error on recv from
supervisor socket, errno %d
E56028
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Nothing read from
supervisor socket, errno %d
E56029
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unknown message
'%s:%s' from supervisor socket
E56030
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Error on recv from
IVR socket, errno %d
E56031
ivr_conn: Nothing read from
IVR socket, errno %d
E56032
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unknown message
(%c) from IVR socket
E56033
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Invalid message (%s)
in input IPC queue
E56034
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unable to set socket
to FIOASYNC, errno %d
E56035
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unable to set socket
to FIOSNBIO, errno %d
E56036
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Unable to set process
to receive SIGIO, errno %d
E56037
v_dialer\ivr\src\ivr_conn_io.c
ivr_conn: Send error, client %d
(still trying)
E56038
v_dialer\ivr\src\ivr_conn_io.c
ivr_conn: Send error, client %d
(giving up)
E56039
v_dialer\ivr\src\ivr_conn_io.c
: err=%d sent=%d rem=%d
dt=%d try=%d
Maintenance and Troubleshooting Guide
March 2008
357
E56040
v_dialer\ivr\src\ivr_conn_io.c
ivr_conn: Error in select in
MicroSleep, errno %d
E56041
v_dialer\ivr\src\ivr_conn_io.c
ivr_conn: Fail to write to pipe sd %d
E56042
v_dialer\ivr\src\ivr_conn_io.c
ivr_conn: Caught signal %d, err
%d
E56043
v_dialer\ivr\src\ivr_conn_io.c
ivr_conn: sigaction failed in
InitSigHandlers
E56044
v_dialer\ivr\src\ivr_conn.c
ivr_conn: IVR pool job '%s'
does not exist
E56045
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Error in trying to
access IVR pool job '%s'; errno
= %d
E56046
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Already connected to
IVR '%s'
E56047
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Not connected to IVR
'%s'
E56048
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Still connected to IVR
'%s'
E56049
v_dialer\ivr\src\ivr_conn.c
ivr_conn: Reset of IVR '%s' in
progress, please wait...
E57000
v_dailer\dialer\dispatcher\dunupinit.c
Dispatcher startup soe_init
error: %d
E57001
v_dailer\dialer\dispatcher\dunupinit.c
Dispatcher startup invalid
argument count: %d
E57002
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\agent_time_util.c
v_dialer\dialer\src\core\operator.c
v_dailer\dialer\dispatcher\dunupinit.c
v_dialer\dialer\src\swif\exec\opmon.c
Linked list insert error: %d for
list: %s
E57003
358
Linked list create error: %d for
list: %s
E57004
v_dailer\dialer\dispatcher\dunupinit.c
Unable to find opmon IPC
E57005
v_dailer\dialer\dispatcher\dunupinit.c
Unable to create dispatcher
mailbox <%s>, error: %d
E57006
v_dailer\dialer\dispatcher\dunupinit.c
Cleaning up received fatal
signal: %d
Maintenance and Troubleshooting Guide
March 2008
E57007
v_dailer\dialer\dispatcher\dunupinit.c
Error: %d deleting dispatcher
mailbox
E57008
v_dailer\dialer\dispatcher\dunupinit.c
v_dailer\dialer\dispatcher\
mp_change_groupid.c
v_dailer\dialer\dispatcher\
pa_acd_perm.c
v_dailer\dialer\dispatcher\
snd_agt_msg.c
v_dailer\dialer\dispatcher\gateway.c
Send message error: %d <%s>
E57009
v_dailer\dialer\dispatcher\ap_aborting.c
v_dailer\dialer\dispatcher\ap_acquiring.c
v_dailer\dialer\dispatcher\
ap_prereleasing.c
v_dailer\dialer\dispatcher\ap_releasing.c
v_dailer\dialer\dispatcher\dunupinit.c
v_dailer\dialer\dispatcher\
mp_change_groupid.c
v_dailer\dialer\dispatcher\mp_job_set.c
v_dailer\dialer\dispatcher\
pa_acd_perm.c
v_dailer\dialer\dispatcher\
snd_agt_msg.c
v_dailer\dialer\dispatcher\dunup.c
v_dailer\dialer\dispatcher\gateway.c
Error trying to malloc space:
<%s>
E57010
v_dailer\dialer\dispatcher\dunupinit.c
v_dailer\dialer\dispatcher\mp_login.c
Error opening file: <%s>
E57011
v_dailer\dialer\dispatcher\dunup.c
Unexpected object: %d
msgtype: %d from md: %d
E57012
v_dailer\dialer\dispatcher\dunup.c
Invalid msgtype: %d from md:
%d
E57013
v_dailer\dialer\dispatcher\dunup.c
Receive message error: %d
E57014
v_dailer\dialer\dispatcher\
action_processor.c
Unknown mode %s: %d
Maintenance and Troubleshooting Guide
March 2008
359
360
E57015
v_dailer\dialer\dispatcher\du_format.c
v_dailer\dialer\dispatcher\
mp_genrel_query.c
v_dailer\dialer\dispatcher\
mp_op_headset_state.c
v_dailer\dialer\dispatcher\
mp_op_link_failure.c
v_dailer\dialer\dispatcher\
mp_response.c
Attribute not found: %d
E57016
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\agent_time_util.c
v_dialer\dialer\src\core\operator.c
v_dailer\dialer\dispatcher\dunupinit.c
v_dailer\dialer\dispatcher\genrel_util.c
v_dailer\dialer\dispatcher\
mp_acquire_op.c
v_dailer\dialer\dispatcher\
mp_call_connect.c
v_dailer\dialer\dispatcher\mp_login.c
v_dialer\dialer\src\swif\exec\opmon.c
Linked list queuing error: %s
E57017
v_dailer\dialer\dispatcher\dunuputil.c
Invalid mailbox: %s
E57018
v_dailer\dialer\dispatcher\
event_processor.c
v_dailer\dialer\dispatcher\
mp_call_event.c
Invalid event: %d %s
E57019
v_dailer\dialer\dispatcher\gateway.c
v_dialer\dialer\src\swif\exec\
ServMonMsg.cpp
Unable to register to mailbox
<%s>, error: %d
E57020
v_dailer\dialer\dispatcher\
mp_acquire_op.c
Duplicate acquire request on
vdn <%s>
E57021
v_dailer\dialer\dispatcher\
mp_acquire_op.c
Not enough licenses - Max
acquire agents: %d
Maintenance and Troubleshooting Guide
March 2008
E57022
v_dailer\dialer\dispatcher\
mp_call_connect.c
v_dailer\dialer\dispatcher\
mp_call_event.c
v_dailer\dialer\dispatcher\
mp_change_groupid.c
v_dailer\dialer\dispatcher\
mp_create_call.c
v_dailer\dialer\dispatcher\
mp_domain_action.c
v_dailer\dialer\dispatcher\mp_job_set.c
v_dailer\dialer\dispatcher\mp_login.c
v_dailer\dialer\dispatcher\mp_logout.c
v_dailer\dialer\dispatcher\
mp_trunk_release.c
v_dailer\dialer\dispatcher\
mp_user_action.c
E57023
Invalid attribute: %d %s
Unexpected call connect for
call_id: %d
E57024
v_dailer\dialer\dispatcher\
mp_call_made.c
Unexpected call made to vdn:
<%s> scai_link: %d
E57025
v_dailer\dialer\dispatcher\
mp_response.c
Call reject error: %d for call_id:
%d
E57026
v_dailer\dialer\dispatcher\
mp_call_reject.c
v_dailer\dialer\dispatcher\mp_job_set.c
Invalid job id: %d
E57027
v_dailer\dialer\dispatcher\
mp_create_call.c
Unexpected create call for
call_req_id: %d
E57028
v_dailer\dialer\dispatcher\
mp_domain_action.c
v_dailer\dialer\dispatcher\
mp_user_action.c
Invalid action: %d %s
E57029
v_dailer\dialer\dispatcher\mp_job_set.c
Invalid process state: %d %s
E57030
v_dailer\dialer\dispatcher\mp_login.c
Extension <%s> is already in
use by user: %d
E57031
v_dailer\dialer\dispatcher\
mp_response.c
Error: %d as a response to:
<%s> message
E57032
v_dailer\dialer\dispatcher\
mp_response.c
Unknown resp_type event: %d
Maintenance and Troubleshooting Guide
March 2008
361
E57033
v_dailer\dialer\dispatcher\
mp_response.c
Unexpected response objid:
%d, invokeid: %d
E57034
v_dialer\dialer\src\core\
agent_misc_util.c
v_dailer\dialer\dispatcher\mp_timeout.c
Process <%s> not responding
to msg: <%s>
E57035
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\agent_time_util.c
v_dailer\dialer\dispatcher\mp_timeout.c
Get time error: <%d>, will try
again
E57036
v_dialer\dialer\src\core\ao_recall.c
v_dialer\dialer\src\core\agent_time_util.c
v_dailer\dialer\dispatcher\mp_timeout.c
Invalid timeout event: <%d>
E57037
362
Voice message not defined:
<%d>
E57038
v_dailer\dialer\dispatcher\mp_login.c
Extension <%s> scai_link: %d
is not installed
E57039
v_dailer\dialer\dispatcher\
mp_call_connect.c
Expected timeout <%s> not
found, call_id: <%d>
E57040
v_dailer\dialer\dispatcher\
mp_call_made.c
Expected timeout <%s> not
found, vdn: <%s>
E57041
v_dailer\dialer\dispatcher\mp_release.c
Release of pbx ext <%s> which
is not fully acquired
E57042
v_dailer\dialer\dispatcher\mp_login.c
User id %d was already in use
E57043
v_dailer\dialer\dispatcher\
mp_user_action.c
User ext <%s> scai_link <%d>
is not found
E57044
v_dailer\dialer\dispatcher\dunupinit.c
Unable to read acd_license.cfg,
error: <%d>
E58002
v_dialer\dialer\src\core\agent.c
v_dialer\dialer\src\core\caller.c
v_dialer\dialer\src\core\operator.c
v_dialer\dialer\src\reports\history\
datamgr_init.cpp
v_dialer\dialer\src\swif\exec\
ServMonMsg.cpp
v_dialer\dialer\services\
srcEventServer.cpp
v_dialer\dialer\src\swif\exec\opmon.c
v_dialer\dialer\src\core\porter.c
%s - Unable to initialize soe
(%d)
E59500
v_dialer\dialer\src\core\jobctrl.c
Job %s not currently running.
Maintenance and Troubleshooting Guide
March 2008
E59501
dialer/src/core/jobctrl.c
dialerCmdctrl\HeadsetLib.cpp
E59502
Illegal parameters: %s
Job %s not ready.
E59503
v_dialer\dialer\src\core\jobctrl.c
Job name not specified: %s
E59505
v_dialer\dialer\src\core\jobctrl.c
Job(%s) not linkable
E59506
v_dialer\dialer\src\core\jobctrl.c
Malloc failure in list_agents
E59507
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Inbound capable jobs only: %s
E59508
v_dialer\dialer\src\core\jobctrl.c
Outbound capable jobs only:
%s
E59508
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Monitoring of operator disabled
E59509
v_dialer\dialer\src\core\jobctrl.c
Monitoring of operator disabled
E59510
v_dialer\dialer\src\core\jobctrl.c
Error, no operator %s on job
%s
E59511
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Managed dialing capable jobs
only: %s
E59512
v_dialer\dialer\src\core\jobctrl.c
Illegal time zone: %s
E59513
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Illegal action %s
E59514
v_dialer\dialer\src\core\jobctrl.c
Inbound capable jobs only
E59516
v_dialer\dialer\src\core\jobctrl.c
Outbound capable jobs only
E59517
v_dialer\dialer\src\core\jobctrl.c
Managed dialing capable jobs
only
E59518
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Illegal time zone name %c
E59519
v_dialer\dialer\src\core\api_jobctl.c
v_dialer\dialer\src\core\jobctrl.c
Unable to open transfer lock file
%s
E59520
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Not a multi-unit job: %s
Maintenance and Troubleshooting Guide
March 2008
363
E59521
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
No units currently available
E59522
dialer/src/core/jobctrl.c
dialerCmdctrl\CJobTableSO.cpp
Illegal units %s
E59527
v_dialer\dialer\src\core\jobctrl.c
Job name not specified
E59528
v_dialer\dialer\src\core\jobctrl.c
Job linking capable jobs only
E59530
v_dialer\dialer\src\core\jobctrl.c
Job not currently linked
E59531
364
Invalid port for monitoring
agents
E59533
v_dialer\dialer\src\core\jobctrl.c
Warning: Operator already
being transferred.
E59534
v_dialer\dialer\src\core\jobctrl.c
Job1 %s not ready.
E59535
v_dialer\dialer\src\core\jobctrl.c
Job2 %s not ready.
E59539
v_dialer\dialer\src\core\jobctrl.c
Illegal change %s
E59540
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
Headset ID (%s) already in use
E59541
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
No more headsets permitted on
system
E59542
v_dialer\dialer\src\core\jobctrl.c
v_dialer\dialer\DialerCmdCtrl\
HeadsetLib.cpp
Failure to access headset table
E59596
v_dialer\dialer\src\core\jobctrl.c
No operator slot available
E59597
v_dialer\dialer\src\core\jobctrl.c
System is not running
E59598
v_dialer\dialer\src\core\jobctrl.c
Illegal parameters
E59599
v_dialer\dialer\src\core\jobctrl.c
Bad command
E59600
v_dialer\dialer\src\core\jobctrl.c
Not a Cruise Control job
E61000
midtier\unixdev\CmdCtrl\src\
DialerCfgClient.cpp
%s failed: Exception %s; Id %ul
Maintenance and Troubleshooting Guide
March 2008
E61001
midtier\unixdev\RealTimeDataServer\
src\RTRMmain.cpp
midtier\unixdevv_dialer\dialer\services\
src\Init.cpp
v_dialer\dialer\services\
srcEventServiceIF_i.cpp
midtier\unixdev\CmdCtrl\src\
DialerCfgClient.cpp
midtier\unixdev\Logger\src\
LoggingServer_i.cpp
midtier\unixdev\ServiceActivation\src\
ServiceActivatingIFImpl.cxx
midtier\unixdev\ServiceMonitor\src\
ServiceMonitor_ServiceMonitoringIFImp
l.cxx
midtier\unixdevv_dialer\dialer\services\
src\DialerEventServerIF_i.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventClient.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventServer.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventServiceIF_i.cpp
midtier\unixdev\SysHealth\src\
SystemHealthEntryImpl.cpp
v_dialer\dialer\DialerServiceActivation\
src\DSAServiceIFImpl.cxx
\DSHdialerSystemHealthEntryImpl.cpp
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitoringIFImpl.cxx
Exception raised: %s
E61002
midtier\unixdevv_dialer\dialer\services\
src\EventServiceIF_i.cpp
v_dialer\dialer\services\
srcEventServiceIF_i.cpp
Failed to create thread
Maintenance and Troubleshooting Guide
March 2008
365
E61003
midtier\unixdev\CmdCtrl\src\
DialerCfgClient.cpp
midtier\unixdev\RealTimeDataServer\
src\RTRMmain.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventClient.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventServer.cpp
midtier\unixdevv_dialer\dialer\services\
src\EventServiceIF_i.cpp
midtier\unixdevv_dialer\dialer\services\
src\Init.cpp
v_dialer\dialer\services\
srcEventServiceIF_i.cpp
Caught unknown exception
E61004
midtier\unixdev\services\src\Init.cpp
Failed to write to IOR file %s
E61005
midtier\unixdev\services\src\Init.cpp
Failed to initialize signal
handlers
E61006
midtier\unixdev\services\src\Init.cpp
Failed to initialize %d
E61007
midtier\unixdev\services\src\
EventServer.cpp
attach_datashm () failed -- is
system up?
E61008
midtier\unixdev\services\src\
ShmDataReader.cpp
Number of line pools defined in
LINEASSIGN in master.cfg
(%d) exceeds value of
MAX_LINEASSIGN_LABELS
(%d)
E61009
366
Exceeded max limit of inactive
jobs (%d); skipping the rest
E61040
midtier\unixdev\services\src\Init.cpp
CosNaming NamingContext
not found
E61041
midtier\unixdev\services\src\Init.cpp
CosNaming NamingContext
cannot proceed
E61042
midtier\unixdev\services\src\Init.cpp
CosNaming NamingContext
invalid name
E61043
midtier\unixdev\services\src\Init.cpp
CosNaming NamingContext
already bound
E62000
v_dialer\dialer\DialerCmdCtrl\src\
CmdCtrl_Table_i.cpp
(%s): Operation %s is not
implemented
E62001
dialer\Cmdctrl\CCompcodeTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CConfigTableSO.cpp
(%s): Operation %s is not
applicable to object %s
Maintenance and Troubleshooting Guide
March 2008
E62002
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
v_dialer\dialer\DialerCmdCtrl\
CTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
FileTable.cpp
(%s): Requested column %s
not available in table %s
E62003
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
(%s): Invalid predicate
expression %s: %s
E62004
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
FileTable.cpp
v_dialer\dialer\DialerCmdCtrl\
SelData.cpp
v_dialer\dialer\DialerCmdCtrl\
StratData.cpp
(%s): Invalid column name %s
in predicate expression
E62005
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CompcodeTable.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock_utest.cpp
(%s): Record %s is locked by
owner %s
E62006
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
(add_lock): failed for Record
%s Owner %s
E62007
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
(%s): lock for Record %s
Owner %s is no longer valid
Maintenance and Troubleshooting Guide
March 2008
367
368
E62008
v_dialer\dialer\DialerCmdCtrl\
CompcodeData.cpp
v_dialer\dialer\DialerCmdCtrl\
JobData.cpp
v_dialer\dialer\DialerCmdCtrl\
PromptData.cpp
v_dialer\dialer\DialerCmdCtrl\
SelData.cpp
v_dialer\dialer\DialerCmdCtrl\
StratData.cpp
(%s): internal error - no data
E62009
v_dialer\dialer\DialerCmdCtrl\
CompcodeData.cpp
(%s): no values for input
E62010
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallListTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CConfigTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CLineGrpTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
(%s): Operation %s requires
%s
E62011
v_dialer\dialer\DialerCmdCtrl\
CConfigTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CLineGrpTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CodeDescTable.cpp
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
v_dialer\dialer\DialerCmdCtrl\
TelephnyTable.cpp
v_dialer\dialer\DialerCmdCtrl\
VoicemsgCfgTable.cpp
(%s): Operation %s: Invalid
parameters
Maintenance and Troubleshooting Guide
March 2008
E62012
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
(%s): Record %s is not locked
by owner %s, current owner is
%s
E62013
v_dialer\dialer\DialerCmdCtrl\
AgentLib.cpp
v_dialer\dialer\DialerCmdCtrl\
CCompcodeTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
FileTable.cpp
(%s): Requested row %s not
available in table %s
E62014
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
Unable to create file %s, errno
= %d
E62015
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
Unable to open file %s for read/
write, errno = %d
E62016
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
Unable to open file %s for
update, errno = %d
E62017
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
Unable to open file %s for
readonly, errno = %d
E62018
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
Unable to delete file %s, errno
= %d
E62019
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
Unable to create file %s, file
already exists
Maintenance and Troubleshooting Guide
March 2008
369
370
E62020
v_dialer\dialer\DialerCmdCtrl\
CrudulMethods.cpp
v_dialer\dialer\
DialerCmdCtrl_Agent_i.cpp
v_dialer\dialer\
DialerCmdCtrl_CallSelect_i.cpp
v_dialer\dialer\DialerCmdCtrl
v_dialer\dialer\
DialerCmdCtrl_CallStrategy_i.cpp
v_dialer\dialer\DialerCmdCtrl
v_dialer\dialer\
DialerCmdCtrl_Compcode_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Config_i.cpp
v_dialer\dialer\
DialerCmdCtrl_DialerControl_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Domain_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Headset_i.cpp
v_dialer\dialer\DialerCmdCtrl_Ivr_i.cpp
v_dialer\dialer\DialerCmdCtrl_Job_i.cpp
v_dialer\dialer\
DialerCmdCtrl_SelectIndex_i.cpp
v_dialer\dialer\
DialerCmdCtrl_TableFactory_i.cpp
General Exception - Table: %s
Method: %s
E62021
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
File %s does not exist, errno =
%d
E62022
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
(%s): Operation %s requires
Record ID as one of the query
conditions
E62023
v_dialer\dialer\
DialerCmdCtrl_TableFactory_i.cpp
Incorrect Table Type
Maintenance and Troubleshooting Guide
March 2008
E62024
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CompcodeTable.cpp
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
v_dialer\dialer\DialerCmdCtrl\
MasterCfgTable.cpp
v_dialer\dialer\DialerCmdCtrl\
TelephnyTable.cpp
v_dialer\dialer\DialerCmdCtrl\
VoicemsgCfgTable.cpp
(%s): lock_record - Unknown
locktype %s
E62025
v_dialer\library\libutil++\src\account_r.
(%s) [%#x] : %s(): Error %#x
[%s] %s occurred
E62026
v_dialer\library\libutil++\src\account_r.
(%s) [%#x] : %s(): Error %#x
%s occurred\n
Maintenance and Troubleshooting Guide
March 2008
371
E62027
v_dialer\dialer\DialerCmdCtrl\
CrudulMethods.cpp
v_dialer\dialer\
DialerCmdCtrl_Agent_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Blend_i.cpp
v_dialer\dialer\
DialerCmdCtrl_CallSelect_i.cpp
v_dialer\dialer\
DialerCmdCtrl_CallStrategy_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Compcode_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Config_i.cpp
v_dialer\dialer\
DialerCmdCtrl_DialerControl_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Domain_i.cpp
v_dialer\dialer\
DialerCmdCtrl_Headset_i.cpp
v_dialer\dialer\DialerCmdCtrl_Ivr_i.cpp
v_dialer\dialer\DialerCmdCtrl_Job_i.cpp
v_dialer\dialer\
DialerCmdCtrl_SelectIndex_i.cpp
v_dialer\dialer\
DialerCmdCtrl_TableFactory_i.cpp
E62028
%s - Error allocating memory
E62029
v_dialer\dialer\DialerCmdCtrl\
MsgQueue.cpp
(%s): Invalid Message Queue
handle
E62030
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
(%s): Invalid agent name
E62031
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
(%s): Invalid headset ID
E62032
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCompcodeTableSO.cpp
(%s): Failed to connect to
shared memory
E62033
v_dialer\dialer\DialerCmdCtrl\
ShmAccess.cpp
(%s): Failed to connect to
agent %s shared memory
E62034
372
Platform Exception - Table: %s
Method: %s
Maintenance and Troubleshooting Guide
(%s): Agent %s is not active
March 2008
E62035
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
(%s): Agent %s is already
monitored by line %d
E62036
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
(%s): Failed to get IPC key for
job: %s
E62037
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
(%s): Failed to open IPC for %s
E62038
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
(%s): Invalid message to notify
agent(s)
E62039
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
CAgentTableSO.cpp
(%s): Failed to connect to job
%s shared memory
E62040
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
Lock expired for Record: %s,
Owner: %s
E62041
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Unable to fill required field %s
for Job %s
E62042
v_dialer\library\libcallsel\src\
cllcallsel.cpp
(%s): Selection Index Failure:
Could not verify selection %s
with list %s. Run Verify
Selection to find specific errors.
E62043
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
(%s): Invalid agent name
selection pattern '%s'
E62044
v_dialer\library\libcallsel\src\
cllcallsel.cpp
(%s): Selection Index Failure:
Could not verify strategy %s
with list %s. Run Verify Strategy
to find specific errors.
E62045
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
(%s): Shared memory object
not associated with job: %s
E62046
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Invalid parameters for setting
%s
E62047
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Number of Call Strategy
Control items requested is
greater than allowed on system
E62048
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Requested value less than
minimum value.
Maintenance and Troubleshooting Guide
March 2008
373
E62049
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Unable to start job - job file in
use by character user interface.
E62050
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
Unable to start job - lock on file
failed.
E62051
dialerclient\Redwood\VBApps\Editor\
MDIForm1.frm
dialerclient\Redwood\VBApps\Editor\
Modules\General.bas
Unable to start job - job file in
use by %s
E62052
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cppv_dialer\dialer\
DialerCmdCtrl\CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
v_dialer\dialer\DialerCmdCtrl\
CompcodeTable.cpp
File %s in use by character
user interface.
E62053
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CompcodeTable.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
Lock on file failed.
E62054
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
No response from Job Starter
for %s
E62055
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Invalid response from Job
Starter for %s
E62056
374
Failed check for required fields
due to lock on job file
E62057
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
(%s): Invalid index process
handle
E62058
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
(%s): Unable to locate status
for calling index process handle
'%s'
Maintenance and Troubleshooting Guide
March 2008
E62059
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
(%s): Failed to send a
notification to agent %s
E62060
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
Invalid file name: %s
E62061
v_dialer\dialer\DialerCmdCtrl\
CSelIndexTableSO.cpp
(%s): Communication with
remote list server failed when
processing %s calling list and
%s calling selection
E62062
v_dialer\library\libcallsel\src\
CallStgyLib.cpp
(%s): Invalid Next Phone
definition from phone %s to
phone %s that creates infinite
loop
E62070
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptSyntaxErrorRe.cpp
%s(%d): Syntax error: %s
E62071
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptSyntaxErrorRe.cpp
%s(%d): Error in command
'%s': %s
E62072
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Unknown variable name '%s'
E62073
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Unexpected error in script
definition
E62074
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Total number of lines %d
exceeds maximum allowed
(must be %d or less)
E62075
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid field name '%s'
Maintenance and Troubleshooting Guide
March 2008
375
376
E62076
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid number of days %d
E62077
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid number of hours %d
E62078
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid number of minutes %d
E62079
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid audio message ID value
%d
E62080
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid time interval value %d
E62081
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid relational operator '%s'
E62082
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid completion code
keyword '%s'
E62083
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlBase.cpp
(%s): Failed to initialize XML
processor: %s
E62084
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlBase.cpp
(%s): Failed to terminate XML
processor: %s
E62085
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlBase.cpp
(%s): Failed to initialize XSLT
processor: %s
Maintenance and Troubleshooting Guide
March 2008
E62086
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlBase.cpp
(%s): Failed to terminate XSLT
processor: %s
E62087
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptTransform.cpp
(%s): XML processing failed:
%s
E62088
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptTransform.cpp
(%s): XML/DOM processing
failed
E62089
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
SptTransform.cpp
(%s): XSLT processing failed:
%s
E62090
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XmlDomErrorHandler.cpp
Invalid element '%s'
E62091
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
v_dialer\dialer\DialerCmdCtrl\
XsltBase.cpp
(%s): Failed to compile XSLT
stylesheet '%s'
E62092
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Invalid label length '%s' (must
be %d bytes or less)
E62093
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Referenced label '%s' not
defined
E62094
v_dialer\dialer\DialerCmdCtrl\
SptParserApi.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Command '%s' malformed
E62095
v_dialer\dialer\DialerCmdCtrl\
CTelephnySpt.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
(%s) Operation %s:%s failed
during validation
Maintenance and Troubleshooting Guide
March 2008
377
E62096
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
v_dialer\dialer\DialerCmdCtrl\
SptProcessor_utest.cpp
Duplicate label '%s' definition
(first definition found in file %s,
line %d)
E62097
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
File not open
E62098
v_dialer\dialer\DialerCmdCtrl\
FileAccess.cpp
Unable to seek to beginning of
file
E62099
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
File %s is not a valid audio
message file
E62100
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
Combined size of audio
messages of %d kB (approx.
%02d:%02d minutes) exceeds
the total storage capacity %d
kB (approx. %02d:%02d
minutes) on PG230 board
E62101
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
Total number of audio
messages %d exceeds the limit
of %d messages
E62102
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
Referenced %s audio message
not available on the system
E62103
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
Audio message ID %d exceeds
the the limit of highest ID value
%d
E62104
v_dialer\dialer\DialerCmdCtrl\
DccsAudioFileValidator.cpp
Using a reserved audio
message ID %d
E62105
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
Invalid attribute keyword '%s'
E62106
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
DccsSptValidator.cpp
Invalid attribute value '%s' for
keyword '%s'
E62107
Cannot start monitor agent '%s'
audio when on a shadow job
E62108
Cannot stop monitor agent '%s'
audio when on a shadow job
E62109
v_dialer\dialer\DialerCmdCtrl\
AgentShmLib.cpp
E62110
378
Maintenance and Troubleshooting Guide
Cannot send a message to '%s'
agent when on a shadow job
Cannot remove an agent '%s'
when on a shadow job
March 2008
E62111
Cannot start monitor agent '%s'
audio when on a shadow job
E62112
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock_utest.cpp
Record is already locked by
current user '%s'
E62113
v_dialer\dialer\DialerCmdCtrl\
CCallSelTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CCallStratTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
CJobTableSO.cpp
v_dialer\dialer\DialerCmdCtrl\
RecordLock.cpp
Record is not locked. Current
user '%s'
E62114
Unknown lock state. Current
user '%s'
E63000
midtier\unixdev\CmdCtrl\src\
CCTable.cpp
midtier\unixdev\CmdCtrl\src\
CmdCtrlImpl.cpp
E66666
v_dialer\dialer\src\core\agent.c
E70000
v_dialer\dialer\src\core\agent_io_util.c
Incorrect number of arguments
E70001
v_dialer\dialer\src\core\agent_io_util.c
Incorrect message type
E70002
v_dialer\dialer\src\core\agent_time_util.c
Timed out waiting for %s
E70003
v_dialer\dialer\src\core\
agent_misc_util.c
Incorrect job type
E70004
v_dialer\dialer\src\core\
agent_misc_util.c
v_dialer\dialer\src\core\agent_sys_util.c
Command failed
E70005
v_dialer\dialer\src\core\agent_io_util.c
Incoming command exceeded
maximum buffer size
E70006
v_dialer\dialer\src\core\agent.c
Must select unit
E70007
v_dialer\dialer\src\core\agent_tdss_util.c
Cannot transfer inbound call
Maintenance and Troubleshooting Guide
Unable to send a message to
Dialer: %s Object: %s
March 2008
379
E70008
v_dialer\dialer\src\core\agent_tdss_util.c
Must specify transfer job
E70009
v_dialer\dialer\src\core\agent_tdss_util.c
Unable to send message to %s
E70010
v_dialer\dialer\src\core\agent_tdss_util.c
Conference in progress
E70011
v_dialer\dialer\src\core\agent_hs_util.c
Call blending is not available
E70012
v_dialer\dialer\src\core\
agent_misc_util.c
Password has expired
E70013
v_dialer\dialer\src\core\
agent_misc_util.c
Password can not be changed,
change limit not expired
E70014
380
Password can not be changed,
password file locked
E70015
v_dialer\dialer\src\core\
agent_misc_util.c
Unable to become root
privilege for setting password
E70016
v_dialer\dialer\src\core\
agent_misc_util.c
Original password is invalid
E70017
v_dialer\dialer\src\core\
agent_misc_util.c
New password entered is
invalid
E70018
v_dialer\dialer\src\core\agent.c
IVR_SCRIPT is blank in job %s
E70019
v_dialer\dialer\src\core\agent.c
Job %s is not valid for IVR
agents
E72000
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
%s can't initialize signal
handlers
E72010
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
%s server name
AlreadyBound. ignored
E72030
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
%s server name resolve
CannotProceed
E72040
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
%s server name resolve
InvalidName
Maintenance and Troubleshooting Guide
March 2008
E72050
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
%s Caught CORBA system
exception: err=%s
E72051
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
%s Caught CORBA exception:
err=%s
E72052
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
%s Caught CORBA
TRANSIENT error.
E72060
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DSMEvent.cxx
v_dialer\dialer\DialerServiceMonitor\src\
EventReceiver.cxx
v_dialer\dialer\DialerServiceMonitor\src\
SoeEvent.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
%s Caught unknown exception
E72070
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
%s is NotFound
E72080
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
failed to write %s IOR
E72090
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
%s:: Caught LogOnOffError
exception(%d, %s)
E72100
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
function %s failed!
E72110
E72120
failed to create %s!
v_dialer\dialer\DialerServiceActivation\
src\DSAIFImpl.cxx
Maintenance and Troubleshooting Guide
can not start activation, %s!
March 2008
381
382
E72130
v_dialer\dialer\DialerServiceActivation\
src\DSAIFImpl.cxx
failed on starting a %s thread.
E72140
v_dialer\dialer\DialerServiceActivation\
src\DSAIFImpl.cxx
reqID=%d, failed to add
request.
E72150
v_dialer\dialer\DialerServiceActivation\
src\DSAIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
failed to load %s.
E72160
v_dialer\dialer\DialerServiceActivation\
src\DSA.cxx
v_dialer\dialer\DialerServiceActivation\
src\DSAIFImpl.cxx
v_dialer\dialer\DialerServiceActivation\
src\DSAServiceIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
EventReceiver.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitoringIFImpl.cxx
%s: failed on %s.
E72170
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
reqID=%d, Failed to execute
child process =%s. cmd=%s,
errno=%d, ret=%d
E72180
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
reqID=%d, Failed to start the
service=%s
E72190
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
reqID=%d, Caught
DSAError.failed to stop the
service=%d
E72200
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
reqID=%d, Caught unknown
exception. failed to stop the
service=%d
E72201
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
E72210
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
Maintenance and Troubleshooting Guide
%s: reqID=%d, the reference
no longer denotes an existing
obj
March 2008
E72220
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
%s: reqID=%d, could not
decide whether or not obj
exists.
E72230
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
%s: reqID=%d, failed on calling
observer's Update method.
E72240
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
%s: reqID=%d, cmd=%s,
caught unknown exception. %s
E72250
v_dialer\dialer\DialerServiceActivation\
src\DSARequest.cxx
%s: reqID=%d, Failed to %s.
cmd=%s, errno=%d, ret=%d
E72260
v_dialer\dialer\DialerServiceActivation\
src\DSAServiceIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitor.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitoringIFImpl.cxx
%s: Failed to convert from char
to LocText
E72270
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceController.cxx
%s: the event either is NOT
found or is not supported or
there is no info for the event.
E72280
v_dialer\dialer\DialerServiceMonitor\src\
\DialerServiceMonitor.cxx
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
%s: Caught SubError. SubError
is: errorID =%s, msg=%s.
E72290
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
%s: input param
ObserverIF_ptr is null.
E72300
v_dialer\dialer\DialerServiceMonitor\src\
DialerServiceMonitorIFImpl.cxx
%s: Create error=%d on
mailbox: %s
E72310
v_dialer\dialer\DialerServiceMonitor\src\
EventReceiver.cxx
%s: Create error on mailbox:
%s
E72320
v_dialer\dialer\DialerServiceMonitor\src\
EventReceiver.cxx
v_dialer\dialer\DialerServiceMonitor\src\
SoeEvent.cxx
Maintenance and Troubleshooting Guide
March 2008
383
384
Maintenance and Troubleshooting Guide
March 2008
Cannot transfer inbound call
An agent is unable to transfer an inbound call.
Description
An agent is unable to transfer an inbound call. This error occurs when the AGTMoFlash_fn
agent call or the agent API calls AGTMoFlashBlind or AGTMoFlashSupv attempt to transfer an
inbound call.
Maintenance and Troubleshooting Guide
March 2008
385
386
Maintenance and Troubleshooting Guide
March 2008
Command failed
An agent API command failed.
Description
This error occurs when trying to set an agent password and an internal system error occurs.
Maintenance and Troubleshooting Guide
March 2008
387
388
Maintenance and Troubleshooting Guide
March 2008
Timed out waiting for <message>
Pending request timed out waiting for a command that timed out.
Description
<message>, a string, contains the name of the command that timed out and the response that
the agent binary was expecting from Avaya Proactive Contact.
Maintenance and Troubleshooting Guide
March 2008
389
390
Maintenance and Troubleshooting Guide
March 2008
Operator monitor process does not respond
A request concerning an agent’s headset volume has generated no response.
Description
A request concerning an agent’s headset volume has generated no response.
Maintenance and Troubleshooting Guide
March 2008
391
392
Maintenance and Troubleshooting Guide
March 2008
Agent <name> logged in Already - Access Denied
Agent <name> is already logged in to the system.
Description
An agent tried to log on to the system with an agent name already in use and access was
denied.
Maintenance and Troubleshooting Guide
March 2008
393
394
Maintenance and Troubleshooting Guide
March 2008
Unable to send message to porter
An agent cannot send a message to porter.
Description
An agent cannot send a message to porter.
Maintenance and Troubleshooting Guide
March 2008
395
396
Maintenance and Troubleshooting Guide
March 2008
Password has expired
During agent log on, the system determines the agent’s password has expired.
Description
During agent log on, the system determines the agent’s password has expired.
Maintenance and Troubleshooting Guide
March 2008
397
398
Maintenance and Troubleshooting Guide
March 2008
<agent><agent_name> - Operator number returned invalid
<slot_num>
The agent logon is invalid.
Description
The <slot_num> is the agent slot number assigned to the agent with user name <agent_name>.
Maintenance and Troubleshooting Guide
March 2008
399
400
Maintenance and Troubleshooting Guide
March 2008
Incorrect message type
Agent application message headers may not be formatted correctly.
Description
This error message may mean that agent application message headers are not formatted
correctly. The message type should be one of the following:
●
Data
●
Pending
●
Error
●
Response
●
Busy
●
Notify
Maintenance and Troubleshooting Guide
March 2008
401
402
Maintenance and Troubleshooting Guide
March 2008
Incorrect number of arguments
Command had wrong number of arguments.
Description
An agent application issued a command containing the wrong number of arguments.
Maintenance and Troubleshooting Guide
March 2008
403
404
Maintenance and Troubleshooting Guide
March 2008
Must select unit
An agent did not select a unit ID value.
Description
The agent is logged in to a Unit Work List job but has not selected a unit ID value to work with.
A Unit Work List job divides customer records into work lists or subsets. Agents work with
records only in their assigned work lists.
Maintenance and Troubleshooting Guide
March 2008
405
406
Maintenance and Troubleshooting Guide
March 2008
Failed to allocate memory
A process failed to allocate memory.
Description
Many different processes can generate this error message. A process is about to store
something in memory and finds that it cannot allocate that memory for its purpose. In general,
this means a malloc call failed.
Maintenance and Troubleshooting Guide
March 2008
407
408
Maintenance and Troubleshooting Guide
March 2008
Audio file name too long
Audio file name is too long
Description
An audio file name exceeds the eight character limit.
Maintenance and Troubleshooting Guide
March 2008
409
410
Maintenance and Troubleshooting Guide
March 2008
Bad argument
A process encountered a bad argument to a function when trying to execute.
Description
A process encountered a bad argument to a function when trying to execute. This error
message can occur when the readtape, writetape, or pds_page binary is trying to write a
message to the screen. It can also occur when the swif_mako process or in some cases with
job control.
The error message should provide the context of the error.
Maintenance and Troubleshooting Guide
March 2008
411
412
Maintenance and Troubleshooting Guide
March 2008
ERROR - Unknown file descriptor
Agent attempted a command that was not correctly formed.
Description
An agent attempted a command that was not correctly formed.
Maintenance and Troubleshooting Guide
March 2008
413
414
Maintenance and Troubleshooting Guide
March 2008
Invalid entry for <name> in <filename>
A process accessed the named file for the named parameter which has an invalid value.
Description
A process, typically in shared memory, found an invalid parameter value in the named file. The
most common reason for this error is an invalid value for the LINEASSIGN value in the
$VOICEDIR/etc/master.cfg file.
Maintenance and Troubleshooting Guide
March 2008
415
416
Maintenance and Troubleshooting Guide
March 2008
Field has incorrect length
List distribution process finds calling list field with incorrect length.
Description
The listdist binary, upon opening the calling list, checks the list’s status field locations and finds
a field with an incorrect length.
Maintenance and Troubleshooting Guide
March 2008
417
418
Maintenance and Troubleshooting Guide
March 2008
Bad file descriptor <num>
Process encounters a bad file descriptor.
Description
A process encounters a bad file descriptor while trying to access a calling list.
Maintenance and Troubleshooting Guide
March 2008
419
420
Maintenance and Troubleshooting Guide
March 2008
Invalid headset number <num> <line>
A process accessed switch information concerning headsets and encountered a headset with
an invalid number.
Description
A process accessed switch information concerning headsets and encountered a headset with
an invalid number. The $VOICEDIR/config/dgswitch.cfg file contains the valid numbers.
Maintenance and Troubleshooting Guide
March 2008
421
422
Maintenance and Troubleshooting Guide
March 2008
Failed to initialize screen environment
Windows screen environment failed to start.
Description
When starting a Windows-based application, the application does not start because Avaya
Proactive Contact could not initiate the Windows screen environment.
Maintenance and Troubleshooting Guide
March 2008
423
424
Maintenance and Troubleshooting Guide
March 2008
Invalid line selection
Choice of line to select is invalid.
Description
When viewing call lists or running jobs, for instance, the system may prompt you to select a line
of the output on the screen to view. Your answer to this prompt did not mach any line number
available for viewing.
Maintenance and Troubleshooting Guide
March 2008
425
426
Maintenance and Troubleshooting Guide
March 2008
Invalid logical connector <name>
A logical connector such as AND has been misspelled.
Description
When creating call strategy you can use logical operators such as AND, OR to create groupings
of criteria. One of these groupings has an invalid logical connector.
Maintenance and Troubleshooting Guide
March 2008
427
428
Maintenance and Troubleshooting Guide
March 2008
Invalid recall code <num>
While working on call strategies, the system encountered an invalid recall code.
Description
While working on call strategies, the system encountered an invalid recall code.
Maintenance and Troubleshooting Guide
March 2008
429
430
Maintenance and Troubleshooting Guide
March 2008
Invalid ring count <num>
A call strategy process encountered an invalid ring count, <num>.
Description
A call strategy process encountered an invalid ring count, <num>.
Maintenance and Troubleshooting Guide
March 2008
431
432
Maintenance and Troubleshooting Guide
March 2008
Invalid time format
Incorrect time format used.
Description
The code that generated this error message requires the user to provide a time. The time was
not given in the correct format,
HH.MM.SS
Maintenance and Troubleshooting Guide
March 2008
433
434
Maintenance and Troubleshooting Guide
March 2008
Conference in progress
An agent attempted to add a call to a conference the call was already in.
Description
An agent attempted to add a call to a conference the call was already in.
Maintenance and Troubleshooting Guide
March 2008
435
436
Maintenance and Troubleshooting Guide
March 2008
Field not defined in calling list
A calling list contains a field that is not defined.
Description
A calling list contains a field that is not defined in the fdict file associated with the calling list.
Note:
Note:
If this error occurs when creating a hash index for the calling list, the
STATUSFLAG field is the source of the error.
Maintenance and Troubleshooting Guide
March 2008
437
438
Maintenance and Troubleshooting Guide
March 2008
Unable to create file
A process cannot create a file required to successfully complete.
Description
Avaya Proactive Contact processes often create files. This particular error message is
generated only during the following activities:
●
Writing record numbers from the hash index file into a calling list.
●
Moving record data, field by field, from one calling list to another.
●
Converting zip codes to area codes.
Maintenance and Troubleshooting Guide
March 2008
439
440
Maintenance and Troubleshooting Guide
March 2008
agent - Failed to read from file <name>
A process, agent, is unable to read the contents of the named file.
Description
This error can occur from a wide variety of sources and for a equally wide range of reasons:
Some of the reasons are:
●
There is not enough memory allocated to read the file.
●
The process cannot read a record in the file
Maintenance and Troubleshooting Guide
March 2008
441
442
Maintenance and Troubleshooting Guide
March 2008
Failed to unlock file
A locked file cannot be unlocked.
Description
Typically, if more than one process or person can access file at any time, a process locks a file
when it is in use so that changes cannot be made by more than user at a time. In this case a file
that was locked cannot be unlocked.
This message can occur whenever a process tries to access a call list or other data file.
Maintenance and Troubleshooting Guide
March 2008
443
444
Maintenance and Troubleshooting Guide
March 2008
Warning: CFRM message truncated
While sending a reply message to the last process that sent an IPC message to the process
that generated the error message, the reply message is truncated.
Description
While sending a reply message to the last process that sent an IPC message to the process
that generated the error message, the reply message is truncated. The message is truncated
either because it is too long or it is no longer a valid message.
Maintenance and Troubleshooting Guide
March 2008
445
446
Maintenance and Troubleshooting Guide
March 2008
Callbacks are not permitted on inbound calls
Agent tried to make a callback on an inbound call.
Description
Agent tried to make a callback on an inbound call and callbacks are not permitted on inbound
calls.
Maintenance and Troubleshooting Guide
March 2008
447
448
Maintenance and Troubleshooting Guide
March 2008
Field <name> not defined in calling list <filename>
A process tried to access the named field in the named calling list and the field does not exist.
Description
A process tried to access the named field in the named calling list and the field does not exist.
Maintenance and Troubleshooting Guide
March 2008
449
450
Maintenance and Troubleshooting Guide
March 2008
clstat <xfd> failed
Creation of a calling list, xfd, header failed.
Description
A process trying to create a list header for the calling list identified by xfd, was unsuccessful.
Maintenance and Troubleshooting Guide
March 2008
451
452
Maintenance and Troubleshooting Guide
March 2008
Failed to remove file <filename>
User attempted to remove a calling list file and could not.
Description
User attempted to remove a calling list file and could not. The error message does identify the
file that was not removed.
Maintenance and Troubleshooting Guide
March 2008
453
454
Maintenance and Troubleshooting Guide
March 2008
Clear fdict <number> failed
Could not clear fdict file <num>.
Description
While creating a new header record and loading header data for the current xfd, there was a
failure to clear the fdict file <num>.
Maintenance and Troubleshooting Guide
March 2008
455
456
Maintenance and Troubleshooting Guide
March 2008
Date is before the current date
The date for the command is before the current date.
Description
The date for the command is before the current date.
Maintenance and Troubleshooting Guide
March 2008
457
458
Maintenance and Troubleshooting Guide
March 2008
Incoming command exceeded maximum buffer size
An agent binary command exceeded the maximum buffer size.
Description
An agent binary command exceeded the maximum buffer size.
Maintenance and Troubleshooting Guide
March 2008
459
460
Maintenance and Troubleshooting Guide
March 2008
<string>: Confirm error (num)
An Avaya CTI process is looking for confirmation of an event.
Description
An Avaya CTI process is looking for confirmation of an event. The string value in the error
message can be one of these values:
●
RouteSelectReq
●
MsgCall - num = 21
●
CSTA_SET_AGENT_STATE
●
Monitor Agent
Maintenance and Troubleshooting Guide
March 2008
461
462
Maintenance and Troubleshooting Guide
March 2008
File corruption or record size mismatch detected in calling
list (name>
While attempting to access a calling list, a process found either a corrupt file or a record that did
not match its known size.
Description
While attempting to access a calling list, a process found either a corrupt file or a record that did
not match its known size.
Maintenance and Troubleshooting Guide
March 2008
463
464
Maintenance and Troubleshooting Guide
March 2008
CTI Error: <string><num>
Each CTI error designated by this error message carries the clue to its origin in the string.
Description
Each CTI error designated by this error message carries the clue to its origin in the string. For
instance, these errors:
1. Error 65
CTI Error:ACSUNSOLICITED:ACS_UNIVERSAL_FAILURE error = 65
tells you the Avaya CT server was shut down.
2. Error -5
CTI Error:acsOpenStream? failed error = -5
tells you that Avaya CT server is not present in the network.
3. Error 25
acsOpenStream: ACS_UNIVERSAL_FAILURE_CONF error = 25
tells you that the login or password was invalid.
4. Error 1007
acsOpenStream: ACS_UNIVERSAL_FAILURE_CONF error = 1007
tells you that the driver was unable to open the new session because no link was available
to the PBX.
Maintenance and Troubleshooting Guide
March 2008
465
466
Maintenance and Troubleshooting Guide
March 2008
CTI not configured for agent events
The Avaya CT Server is not enabled for agent events.
Description
The Avaya CT Server is not enabled for agent events.
Maintenance and Troubleshooting Guide
March 2008
467
468
Maintenance and Troubleshooting Guide
March 2008
Duplicate ALL phone numbers specification
A process was making a change to a calling list in the memory database and an error occurred.
Description
A process was making a change to a calling list in the memory database and an error occurred.,
The change most likely involved a time zone setting or the STD_TO_DIALFMT setting of one or
more telephone numbers.
Maintenance and Troubleshooting Guide
March 2008
469
470
Maintenance and Troubleshooting Guide
March 2008
Duplicate country specified
The system encountered duplicate country settings where it expected a single country.
Description
The system while loading country specific settings from files such as locale.cfg, encountered
setting with duplicate countries where there should only be one country setting.
Maintenance and Troubleshooting Guide
March 2008
471
472
Maintenance and Troubleshooting Guide
March 2008
Environment variable not set
An environment variable required for correct operation of Avaya Proactive Contact is missing.
Description
Environment variables determine how many aspects of the system work. In this case, the most
likely environment variable this not set or not set correctly is $VOICEDIR.
Maintenance and Troubleshooting Guide
March 2008
473
474
Maintenance and Troubleshooting Guide
March 2008
OnEventEstablished: Unknown command (7)
An established event occurred after a request to hang up a call, but before the Clear Call
Confirmation.
Description
An established event occurred after a request to hang up a call, but before the Clear Call
Confirmation.
Maintenance and Troubleshooting Guide
March 2008
475
476
Maintenance and Troubleshooting Guide
March 2008
Recall attempt can’t exceed <num>
The number of recall attempts cannot exceed <num>.
Description
An agent tried to exceed the allowed number, <num>, of recall attempts.
Maintenance and Troubleshooting Guide
March 2008
477
478
Maintenance and Troubleshooting Guide
March 2008
Extra comma in selection criteria
When setting up call strategy, found an extra comma in selection criteria.
Description
When setting up call strategy, the system found an extra comma in selection criteria.
Maintenance and Troubleshooting Guide
March 2008
479
480
Maintenance and Troubleshooting Guide
March 2008
Failed to setup command keys
The command keys for the graphical user interface are not available.
Description
When starting Avaya Proactive Contact, the command keys do not work.
Maintenance and Troubleshooting Guide
March 2008
481
482
Maintenance and Troubleshooting Guide
March 2008
Failed to lock file
A process did not lock a file.
Description
A file is open and can be accessed by more than one process for change. Typically, if more than
one process or person can access file at any time, a process locks a file when it using so that
changes cannot be made while the file is in use.
This message alerts the user that a file that should be locked, is not locked. It can only occur
during these two activities:
●
When generating *.hist files from *.stat files.
●
When the job configuration editor is in use.
Maintenance and Troubleshooting Guide
March 2008
483
484
Maintenance and Troubleshooting Guide
March 2008
Failed to initialize keyboard
At start of Agent API, the system keyboard did not initialize.
Description
For both the graphical user interface (GUI) and the character-based interface to the agent API,
the system checks at startup for an initialized keyboard.
Maintenance and Troubleshooting Guide
March 2008
485
486
Maintenance and Troubleshooting Guide
March 2008
Failed to open directory <dir_name>
An operation tried to open a directory and failed.
Description
An operation tried to open a directory and failed.
Maintenance and Troubleshooting Guide
March 2008
487
488
Maintenance and Troubleshooting Guide
March 2008
Failed to read file header
A process was unable to read the file header of a file.
Description
A shadow job process was unable to read the file header of an inbound calling list.
Resolution
To resolve this issue, follow these steps:
1. Inspect the calling list in use when the error occurred.
2. Repair the file header as necessary.
3. Retry the shadow job activity that created the error message.
Maintenance and Troubleshooting Guide
March 2008
489
490
Maintenance and Troubleshooting Guide
March 2008
Failed to initialize switcher
The system failed to establish communications with the switch.
Description
The system failed to establish communications with the switch.
Maintenance and Troubleshooting Guide
March 2008
491
492
Maintenance and Troubleshooting Guide
March 2008
Fail to load record
When editing calling lists, the user attempts to access a record and the record does not load.
Description
When editing calling lists, the user attempts to access a record and the record does not load.
Maintenance and Troubleshooting Guide
March 2008
493
494
Maintenance and Troubleshooting Guide
March 2008
Fatal error on select - <num>
Agent tried to select job <num> and got a fatal error.
Description
An agent tried to select job <num> and got a fatal error. The agent child process supporting the
client session is terminating.
Maintenance and Troubleshooting Guide
March 2008
495
496
Maintenance and Troubleshooting Guide
March 2008
Field name <name> is invalid
The named field name is not allowed.
Description
A call strategy process has encountered a field name that is invalid.
Maintenance and Troubleshooting Guide
March 2008
497
498
Maintenance and Troubleshooting Guide
March 2008
Invalid field value <value>
The named value for a field is not allowed.
Description
A call strategy process has encountered a named value for a field that is invalid.
Maintenance and Troubleshooting Guide
March 2008
499
500
Maintenance and Troubleshooting Guide
March 2008
Missing or invalid entry in file
A process opens a file and a critical entry is missing or invalid.
Description
This error occurs when a process opens a file to get a parameter value and the parameter is
either missing or invalid. In most cases the process is looking for a value in master.cfg. The
master.cfg values most often looked for are:
●
ARCHIVE_DIR
●
DIALERID
●
LINEASSIGN
●
MAXHIDSLOTS
●
MAXPHONE
●
MAXCMPCODE
●
PORTS
The error may also occur when the process tries to access a environment variable such as TZ,
timezone. All the Avaya Proactive Contact environment files are defined in the $VOICEDIR/
shell/envfile configuration file.
This error can occur when the process tries access other parameters from other configuration
files, but the ones listed above are the most common cause of the error.
Maintenance and Troubleshooting Guide
March 2008
501
502
Maintenance and Troubleshooting Guide
March 2008
File <filename> exists, but is not readable by user
<user_name
A process cannot read an existing file.
Description
This error occurs when a process attempts to read a file, but the process owner does the have
file permissions to read the file. It almost always is an indication of another, deeper, problem.
Maintenance and Troubleshooting Guide
March 2008
503
504
Maintenance and Troubleshooting Guide
March 2008
File <filename> exists, but cannot be written by user
<user_name
A process cannot write to an existing file.
Description
This error occurs when a process attempts to write to a file, but the file permissions do not
permit that user to write to the file. Almost always this indicates a deeper problem.
Maintenance and Troubleshooting Guide
March 2008
505
506
Maintenance and Troubleshooting Guide
March 2008
File <filename> does not exist
A process tried to access a file that does not exist.
Description
A process tried to access a file that does not exist. In many instances of this error message the
process is trying to access an archive file.
This error appears as "Invalid job name" when starting jobs.
Maintenance and Troubleshooting Guide
March 2008
507
508
Maintenance and Troubleshooting Guide
March 2008
File did not close
A process has left a file open that needs to be saved.
Description
This error is only generated by dialer service processes.
Maintenance and Troubleshooting Guide
March 2008
509
510
Maintenance and Troubleshooting Guide
March 2008
No space on file system
The file system is full.
Description
This error can occur when creating an index for use by a caller or when using readtape and
writetape. Whether accessing a hard disk, CD-ROM or tape media, this error indicates the
media is full.
Maintenance and Troubleshooting Guide
March 2008
511
512
Maintenance and Troubleshooting Guide
March 2008
Unequal phone number field lengths in file <name>
A process attempts to read a number written in string format in a file and is unsuccessful.
Description
A process is trying to read a number in string form in a file such as callselnum and encounters
phone numbers of unequal length.
Maintenance and Troubleshooting Guide
March 2008
513
514
Maintenance and Troubleshooting Guide
March 2008
Field value not in acceptable list
A value in a comma delimited list is not allowed in the list.
Description
An agent has created a comma delimited list with an invalid entry.
Maintenance and Troubleshooting Guide
March 2008
515
516
Maintenance and Troubleshooting Guide
March 2008
Entry <value> missing/invalid in <filename> file
A process tried to read a value from a file and <value> is either missing or invalid.
Description
A process tried to read a <value> from <filename> and <value> is either missing or invalid. This
error can occur in many different situations. The first entry in the actual error message should
contain some context of the error.
Maintenance and Troubleshooting Guide
March 2008
517
518
Maintenance and Troubleshooting Guide
March 2008
Gap found between selection criteria lines
When setting up call strategies, a gap exists in the selection criteria.
Description
When setting up call strategies, a gap exists in the selection criteria.
Maintenance and Troubleshooting Guide
March 2008
519
520
Maintenance and Troubleshooting Guide
March 2008
Headset <id_num> not specified in dgswitch.cfg file
The operator process while in test mode, encounters a headset number ID that is not in the
dgswitch.cfg file.
Description
The operator process while in test mode, encounters a headset number ID that is not in the
dgswitch.cfg file.
Maintenance and Troubleshooting Guide
March 2008
521
522
Maintenance and Troubleshooting Guide
March 2008
Headset port number <num> out of range
A process accessed switch information concerning headsets and encountered a headset with a
port number out of range.
Description
A process accessed switch information concerning headsets and encountered a headset with a
port number out of range. The $VOICEDIR/config/dgswitch.cfg file contains the valid port
ranges.
Maintenance and Troubleshooting Guide
March 2008
523
524
Maintenance and Troubleshooting Guide
March 2008
<agent_name> - Exceeded operator slots available,
MAXOPS is low
The <agent_name> logon exceeds the Avaya Proactive Contact system limit on the number of
agents.
Description
The <agent_name> logon exceeds the Avaya Proactive Contact system limit on the number of
agents. MAXOPS is the number of headset ID slots. The number of agents is limited by the
number of slots for headsets available on the switch. This limit is a physical restraint on the
number of agents.
Note:
Note:
This error can occur if client sessions for the agent application are left running on
Avaya Proactive Contact after an agent workstation crashes.
Maintenance and Troubleshooting Guide
March 2008
525
526
Maintenance and Troubleshooting Guide
March 2008
Inbound agents only permitted
An agent other than an inbound agent tried to access an inbound job.
Description
An agent other than an inbound agent tried to access an inbound job.
Maintenance and Troubleshooting Guide
March 2008
527
528
Maintenance and Troubleshooting Guide
March 2008
Invalid answer delay time
A process while adding localization information to the in-memory database encountered an
invalid answer delay time.
Description
A process while adding localization information to the in-memory database encountered an
invalid answer delay time.
Maintenance and Troubleshooting Guide
March 2008
529
530
Maintenance and Troubleshooting Guide
March 2008
Invalid call detection mode <name>
A call detection setting in the call strategy files contains an invalid name.
Description
A call detection setting in the call strategy files contains an invalid name. This setting tells the
system which calls to pass to agents. It can have the following values:
●
Voice
●
Autovoice
●
Intercept
●
No circuit
●
Disconnect
●
Vacant
●
Reorder
Resolution
To resolve this issue, follow these steps:
1. Most likely the offending setting is in the call strategy settings. Find the value for the
keyword, E_STRATEGY in jobEventData. The value is the name of the Call Strategy file
which is typically in the $VOICEDIR/callsel directory. If it is not there, the CALLSEL
keyword in $VOICEDIR/etc/master.cfg to determine the correct directory.
2. Inspect the all detection settings in the jobEventData file for invalid entries.
3. Correct any invalid entries you find.
4. Rerun the process that generated this error message.
You can also use Supervisor to make these corrections:
5. From the Supervisor Main menu, select Campaign > Strategy >Edit a phone strategy
6. See Using Supervisor for more information.
Maintenance and Troubleshooting Guide
March 2008
531
532
Maintenance and Troubleshooting Guide
March 2008
CSTAUniversalConfEvent for call monitor, error = 24
There is no active call because an application has sent an invalid call identifier.
Description
There is no active call because an application has sent an invalid call identifier. The call
identifier is a numeric string of 18 digits. The system generates a call identifier in the following
instances:
●
A job initiates an outbound call
●
.A job checks for an inbound call on an inbound trunk
●
.An agent initiates a manual call
●
.An agent initiates a field call
●
.An agent initiates a transfer
In most cases of this error, the call does not exist or has been cleared.
Maintenance and Troubleshooting Guide
March 2008
533
534
Maintenance and Troubleshooting Guide
March 2008
Invalid format character found
Agent entered a date with an invalid format character.
Description
Agent entered a date with an invalid format character. The agent either entered a date with a
slash (/) versus backslash (\) or in the time format used colons or other extra characters.
Maintenance and Troubleshooting Guide
March 2008
535
536
Maintenance and Troubleshooting Guide
March 2008
invalid channel number <string>
An agent tries to talk directly to the switch/porter and uses an invalid channel number, <string>.
Description
An agent tries to talk directly to the switch/porter and uses an invalid channel number, <string>.
Maintenance and Troubleshooting Guide
March 2008
537
538
Maintenance and Troubleshooting Guide
March 2008
Invalid DAA type
A process while adding localization information to the in-memory database encountered an
invalid DAA type.
Description
A process while adding localization information to the in-memory database encountered an
invalid DAA type.
Maintenance and Troubleshooting Guide
March 2008
539
540
Maintenance and Troubleshooting Guide
March 2008
Invalid date format
Incorrect date format used.
Description
The code that generated this error message requires a date in the correct format. The required
date format is ccyy/mm/dd.
Maintenance and Troubleshooting Guide
March 2008
541
542
Maintenance and Troubleshooting Guide
March 2008
Invalid delay specification
A process accessed the time between recalls and found an invalid delay specification.
Description
A process accessed the time between recalls and found an invalid delay specification.
Maintenance and Troubleshooting Guide
March 2008
543
544
Maintenance and Troubleshooting Guide
March 2008
Invalid file name
The requested or supplied file name is not valid.
Description
Although many operations in Avaya Proactive Contact require specific file names, only a select
few return this error message. This error occurs during the following activities:
1. Creating an index by searching a calling list for records with a specified criteria.
2. Preparing a calling list report.
3. Creating a distribution list of data in a calling list.
4. Displaying a file’s content on the screen.
Maintenance and Troubleshooting Guide
March 2008
545
546
Maintenance and Troubleshooting Guide
March 2008
New password entered is invalid
An agent is trying to create a new password and entered an invalid password.
Description
An agent is trying to create a new password and entered an invalid password.
Maintenance and Troubleshooting Guide
March 2008
547
548
Maintenance and Troubleshooting Guide
March 2008
Invalid offhook retry delay
While a process is adding localization information for a calling list into the memory database, it
finds a phone number with a invalid offhook retry delay.
Description
While a process is adding localization information for a calling list into the memory database, it
finds a phone number with a invalid offhook retry delay.
Maintenance and Troubleshooting Guide
March 2008
549
550
Maintenance and Troubleshooting Guide
March 2008
Invalid phone
When an agent is trying to set up recalls, the system checks that the phone number is valid and
finds one that is not.
Description
When an agent is trying to set up recalls, the system checks that the phone number is valid and
finds one that is not.
If this error occurred when using a process initiated using the Agent API, the telephone field
index does not fall in the range returned by AGTListCallbackFmt for the customer record. In
this case retry the process with a value between 1 and the AGTListCallbackFmt value.
Maintenance and Troubleshooting Guide
March 2008
551
552
Maintenance and Troubleshooting Guide
March 2008
Invalid phone <number>
While using a call strategy or setting up recalls, a process finds a listed invalid phone number.
Description
While using a call strategy or setting up recalls, a process finds a listed invalid phone number.
Maintenance and Troubleshooting Guide
March 2008
553
554
Maintenance and Troubleshooting Guide
March 2008
Invalid phone number length
System finds a phone number with an invalid length.
Description
While the system is entering locale information into memory, it encounters a phone number with
an invalid length.
Maintenance and Troubleshooting Guide
March 2008
555
556
Maintenance and Troubleshooting Guide
March 2008
Invalid phonestat - <status>
Invalid recall telephone selected.
Description
The telephone number specified by the <index> parameter is not valid. The <status> value is B,
T, or Z. B indicates a bad telephone number, T indicates the phone number belongs to an
unknown time zone, and Z indicates that the recall time is invalid in the time zone.
Maintenance and Troubleshooting Guide
March 2008
557
558
Maintenance and Troubleshooting Guide
March 2008
Original password is invalid
The entered password is invalid.
Description
An agent when logging in, enters an invalid password.
Maintenance and Troubleshooting Guide
March 2008
559
560
Maintenance and Troubleshooting Guide
March 2008
Invalid pattern
A process tries to use a pattern as criteria for record selection and the pattern is invalid.
Description
A process tries to use a pattern as criteria for record selection and the pattern is invalid.
Maintenance and Troubleshooting Guide
March 2008
561
562
Maintenance and Troubleshooting Guide
March 2008
Invalid recall code <code>
A recall setting is not recognized by the system.
Description
When selecting records from a calling list, the user can mark entries for recall or choose a field
with a specified value to mark the call for recall. To generate this error message, the value
encountered is not a legitimate value for marking a call for recall or is not recognized a good
value for a specific field.
Maintenance and Troubleshooting Guide
March 2008
563
564
Maintenance and Troubleshooting Guide
March 2008
Invalid response from operator monitor process
The opmon process reported that an agent monitoring process returned an invalid response
concerning headsets.
Description
The opmon process reported that an agent monitoring process returned an invalid response
concerning headsets.
Maintenance and Troubleshooting Guide
March 2008
565
566
Maintenance and Troubleshooting Guide
March 2008
Invalid range character
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the
specified country contains an invalid character.
Description
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the
specified country contains an invalid character.
Maintenance and Troubleshooting Guide
March 2008
567
568
Maintenance and Troubleshooting Guide
March 2008
Invalid ring count <num>
A ring count setting in the call strategy files contains an invalid number.
Description
A ring count setting in the call strategy files contains an invalid number.
Maintenance and Troubleshooting Guide
March 2008
569
570
Maintenance and Troubleshooting Guide
March 2008
Invalid time zone character <char>
A time zone setting in the call strategy files contains an invalid character.
Description
A time zone setting in the call strategy files contains an invalid character.
Maintenance and Troubleshooting Guide
March 2008
571
572
Maintenance and Troubleshooting Guide
March 2008
Invalid use of ALL phone numbers specification
The ALL parameter appears in the locale.cfg file as an invalid entry.
Description
As the system processes a calling list performing the change of phone numbers to standard to
dial format, it uses parameters in the phonefmt.cfg some of which come from the local.cfg file.
The ALL entry can be used in some cases in locale.cfg, but not all.
Maintenance and Troubleshooting Guide
March 2008
573
574
Maintenance and Troubleshooting Guide
March 2008
Invalid VM2 locale code
A process is adding a line of localization code t0 memory and encounters an invalid VM2 locale
code.
Description
A process is adding a line of localization code t0 memory and encounters an invalid VM2 locale
code.
Maintenance and Troubleshooting Guide
March 2008
575
576
Maintenance and Troubleshooting Guide
March 2008
Invalid wait limit
While a process is adding localization information for a calling list into the memory database, it
finds a phone number with a invalid wait limit.
Description
While a process is adding localization information for a calling list into the memory database, it
finds a phone number with a invalid wait limit.
Maintenance and Troubleshooting Guide
March 2008
577
578
Maintenance and Troubleshooting Guide
March 2008
Failed to invoke function
A process tried to start a function and failed.
Description
In most cases, this error occurs during record selection or the creation of phone strategy when a
process tries to spawn a child process.
Maintenance and Troubleshooting Guide
March 2008
579
580
Maintenance and Troubleshooting Guide
March 2008
IPC - invalid input argument
When the system was creating the inter-process communication module (IPC), it encountered
an invalid input argument.
Description
When the system was creating the inter-process communication module (IPC), it encountered
an invalid input argument.
Maintenance and Troubleshooting Guide
March 2008
581
582
Maintenance and Troubleshooting Guide
March 2008
IPC - invalid ipc entry
While sending a message to the ipc queue, the system determines that the message has invalid
content.
Description
While sending a message to the ipc queue, the system determines that the message has invalid
content.
Maintenance and Troubleshooting Guide
March 2008
583
584
Maintenance and Troubleshooting Guide
March 2008
Invalid ipc number <num>
A process sent or received an ipc message that has a invalid ipc number.
Description
A process sent or received an ipc message that has a invalid ipc number.
Maintenance and Troubleshooting Guide
March 2008
585
586
Maintenance and Troubleshooting Guide
March 2008
<process_name> - Accessing bad semaphore
The <process_name> process in trying to use an IPC message, encountered a bad semaphore.
Description
The <process_name> process in trying to use an IPC message, encountered a bad semaphore.
Maintenance and Troubleshooting Guide
March 2008
587
588
Maintenance and Troubleshooting Guide
March 2008
<process_name> - Failed to open semaphore, err(<num>)
The <process_name> process while attempting an IPC message, failed to open a semaphore.
Description
The <process_name> process while attempting an IPC message, failed to open a semaphore.
Maintenance and Troubleshooting Guide
March 2008
589
590
Maintenance and Troubleshooting Guide
March 2008
<process_name> - Failed on semaphore operation, err
<err_num> key = <sem_key_id> code = <op_code>
The <process_name> process attempted an IPC message semaphore operation and failed.
Description
he <process_name> process attempted an IPC message semaphore operation and failed. The
error message includes the name of the process involved, the semipro key ID and the op code.
Maintenance and Troubleshooting Guide
March 2008
591
592
Maintenance and Troubleshooting Guide
March 2008
<process_name> Failed on semaphore removal,
err=<num> key=<num>
The <process_name> tried to remove a semaphore associated with IPC messaging and
generated this error that includes the semaphore id as key=<num>.
Description
The <process_name> tried to remove a semaphore associated with IPC messaging and
generated this error that includes the semaphore id as key=<num>.
Maintenance and Troubleshooting Guide
March 2008
593
594
Maintenance and Troubleshooting Guide
March 2008
IPC - Failed to open opmon message queue
A process tried to open an ipc message queue with opmon and could not open the queue.
Description
A process tried to open an ipc message queue with opmon and could not open the queue.
Maintenance and Troubleshooting Guide
March 2008
595
596
Maintenance and Troubleshooting Guide
March 2008
Response message too long
An ipc response message is too long and therefore not sent.
Description
An ipc response message is too long and therefore not sent
Maintenance and Troubleshooting Guide
March 2008
597
598
Maintenance and Troubleshooting Guide
March 2008
IVR_SCRIPT is blank in job <name>
During a pool job for interactive voice response agents, an IVR script is empty.
Description
The error message names the pool job that encountered a empty IVR script.
Maintenance and Troubleshooting Guide
March 2008
599
600
Maintenance and Troubleshooting Guide
March 2008
Failed to create jobmon graphical user interface (GUI)
The job monitor’s GUI is missing some elements.
Description
When the job monitor GUI is created, either the menu bar, the job monitor window or the status
bar is missing.
Maintenance and Troubleshooting Guide
March 2008
601
602
Maintenance and Troubleshooting Guide
March 2008
Job <name> not running
An agent tried to access a job that is not running.
Description
An agent tried to access a job that is not running.
Maintenance and Troubleshooting Guide
March 2008
603
604
Maintenance and Troubleshooting Guide
March 2008
Job <name> is not valid for IVR agents
The named job is not valid for IVR agents.
Description
The named job is not valid for IVR agents. Any job file has a set of IVR parameters, including
the Allow IVR agents on job parameter. If this parameter is set to NO, IVR agents cannot
access the job.
Maintenance and Troubleshooting Guide
March 2008
605
606
Maintenance and Troubleshooting Guide
March 2008
Error loading job chain
System attempts to load a job chain and next slot is already taken.
Description
System attempts to load a job chain and next slot is already taken.
Maintenance and Troubleshooting Guide
March 2008
607
608
Maintenance and Troubleshooting Guide
March 2008
Attempt to store list_client on host failed
The attempt to store the list_client in slot failed.
Description
The _lcCreateXfd failed in its attempt to store the list_client in a slot on a local or remote host.
Maintenance and Troubleshooting Guide
March 2008
609
610
Maintenance and Troubleshooting Guide
March 2008
Line not released
A line is use by agent was not released.
Description
A line used by agent was not released upon completion of calls.
Maintenance and Troubleshooting Guide
March 2008
611
612
Maintenance and Troubleshooting Guide
March 2008
Mastercfg error
The master.cfg file is either missing an entry or an entry has an invalid value.
Description
The master.cfg value contains critical variables for Avaya Proactive Contact processes. Missing
or invalid entries in master.cfg can cause the system to malfunction.
The master.cfg entries that most often cause this error are:
●
ARCHIVE_DIR
●
CALLSEL
●
CONNABBREV
●
CONNCRIT
●
DATEFORM
●
MAXCMPCODE
●
MAXPHONE
●
PORTCOEF
●
PORTS
Maintenance and Troubleshooting Guide
March 2008
613
614
Maintenance and Troubleshooting Guide
March 2008
Failed to determine max number of phones
The MAXPHONE keyword in the $VOICEDIR/etc.master.cfg file is not set.
Description
The MAXPHONE keyword in the $VOICEDIR/etc.master.cfg file is not set. The MAXPHONE
keyword sets the maximum number of phone numbers in a calling list.
Maintenance and Troubleshooting Guide
March 2008
615
616
Maintenance and Troubleshooting Guide
March 2008
Unable to remove message queue
A process was unable to remove the IPC message queue.
Description
During IPC communication with opmon, a process attempted to remove the IPC message
queue and could not.
Maintenance and Troubleshooting Guide
March 2008
617
618
Maintenance and Troubleshooting Guide
March 2008
Missing delay specification
A process accessed the time between recalls and did not find the delay specification.
Description
A process accessed the time between recalls and did not find the delay specification.
Maintenance and Troubleshooting Guide
March 2008
619
620
Maintenance and Troubleshooting Guide
March 2008
Missing high range
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the
specified country is missing the high limit for values given in locale.cfg.
Description
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the
specified country is missing the high limit for values given in locale.cfg.
Maintenance and Troubleshooting Guide
March 2008
621
622
Maintenance and Troubleshooting Guide
March 2008
Missing completion code
A process working with recalls did not find a completion code.
Description
A process working with recalls did not find a completion code. Recalls use the local.cfg file
RECALLLIMIT keyword to determine the completion code.
Maintenance and Troubleshooting Guide
March 2008
623
624
Maintenance and Troubleshooting Guide
March 2008
Missing line type
A process is looking at the standard to dial format in phonefmt.cfg and cannot find the line type.
Description
The line type is missing from the standard to daily format in phoenfmt.cfg. The line types are
REG (regular), INBND (inbound), OTHER, or ALLTYPES.
Maintenance and Troubleshooting Guide
March 2008
625
626
Maintenance and Troubleshooting Guide
March 2008
Missing or invalid num of chars to strip
A process is looking at the standard to dial format in phonefmt.cfg and cannot find the strip
argument is either missing or invalid.
Description
The strip argument is either missing or invalid in the standard to dial format in phonefmt.cfg. The
strip argument designates the number of digits to strip from the standard phone number when
the prefix is applied.
Maintenance and Troubleshooting Guide
March 2008
627
628
Maintenance and Troubleshooting Guide
March 2008
Missing phone numbers
As the system processes a calling list performing the change of phone numbers to standard to
dial format, the calling list is missing phone numbers.
Description
As the system processes a calling list performing the change of phone numbers to standard to
dial format, the calling list is missing phone numbers.
Maintenance and Troubleshooting Guide
March 2008
629
630
Maintenance and Troubleshooting Guide
March 2008
Missing prefix
A process is looking at the standard to dial format in phonefmt.cfg and cannot find the prefix.
Description
The prefix is missing from the standard to dial format in phonefmt.cfg. The prefix is known as
the exchange.
.
Maintenance and Troubleshooting Guide
March 2008
631
632
Maintenance and Troubleshooting Guide
March 2008
Missing limit
A process is working with recalls and is missing a recall delay limit.
Description
A process is working with recalls and is missing a recall delay limit.
Maintenance and Troubleshooting Guide
March 2008
633
634
Maintenance and Troubleshooting Guide
March 2008
Missing suffix
A process is looking at the standard to dial format in phonefmt.cfg and cannot find the suffix.
Description
The suffix is missing from the standard to dial format in phonefmt.cfg. The suffix, which is added
to the end of the phone number must be 12 characters or less.
Maintenance and Troubleshooting Guide
March 2008
635
636
Maintenance and Troubleshooting Guide
March 2008
Missing or invalid low range
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the
specified country is either missing or does not match the low limit value given in locale.cfg.
Description
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the
specified country is either missing or does not match the low limit value given in locale.cfg.
Maintenance and Troubleshooting Guide
March 2008
637
638
Maintenance and Troubleshooting Guide
March 2008
Missing or invalid reject phone number pattern
The locale.cfg file does not contain a valid or is missing a reject number pattern for a particular
country.
Description
The locale.cfg file does not contain a valid or is missing a reject number pattern for a particular
country.
Maintenance and Troubleshooting Guide
March 2008
639
640
Maintenance and Troubleshooting Guide
March 2008
Missing or invalid time zone designation
The system found a phone number with a bad or missing time zone designation.
Description
While checking a phone number in standard_to_dial format, the system found a phone number
with a bad or missing time zone designation.
Maintenance and Troubleshooting Guide
March 2008
641
642
Maintenance and Troubleshooting Guide
March 2008
Missing time zone specification for country <num>
While checking a phone number in calling list form, the system finds the country without the
time zone specified.
Description
While checking a calling list, the system finds a country without the time zone specified.
Maintenance and Troubleshooting Guide
March 2008
643
644
Maintenance and Troubleshooting Guide
March 2008
MakeCall/MakePredictiveCall/TransferCall Confirm error
(33)
The dialer is trying to make or transfer a call and cannot.
Description
The swif_ct is trying to make or transfer a call in within Avaya Proactive Contact with CTI and
the agent extension is busy.
Maintenance and Troubleshooting Guide
March 2008
645
646
Maintenance and Troubleshooting Guide
March 2008
<type> agents are not permitted on this job
A <type> agent attempted to log on to a job that does permit more agents of that <type>.
Description
A <type> agent attempted to log on to a job that does permit more agents of that <type>. The
$VOICEDIR/etc/master.cfg file keyword, OPLIMIT controls the number of <type> agents
allowed on a job.
Maintenance and Troubleshooting Guide
March 2008
647
648
Maintenance and Troubleshooting Guide
March 2008
Must specify transfer job
Agent did not specify a job name for a call transfer.
Description
An agent must specify a job name to use to transfer calls during inbound and blend jobs.
Maintenance and Troubleshooting Guide
March 2008
649
650
Maintenance and Troubleshooting Guide
March 2008
Failed to attach shared memory
A process failed to attach to a segment of shared memory.
Description
Shared memory structures are used for headsets among other things. This error message is
usually generated by processes involved with headsets or other communication processes.
Maintenance and Troubleshooting Guide
March 2008
651
652
Maintenance and Troubleshooting Guide
March 2008
Cannot open channel to operator monitor process
A supervisor is trying to monitor an agent’s headset and cannot reserve the agent headset ID.
Description
A supervisor is trying to monitor an agent’s headset and cannot reserve the agent headset ID or
an agent cannot adjust headset speaker or ear volumes.
Maintenance and Troubleshooting Guide
March 2008
653
654
Maintenance and Troubleshooting Guide
March 2008
Failed to detach shared memory
A process failed to detach a segment of shared memory.
Description
Shared memory structures are used for headsets among other things. This error message is
usually generated by processes involved with headsets.
Maintenance and Troubleshooting Guide
March 2008
655
656
Maintenance and Troubleshooting Guide
March 2008
No DONE_TME setting
The job file does not contain the DONE_TME field.
Description
The job file does not contain the DONE_TME field. The DONE_TIME field, used for testing, has
a value of YES to allow a test agent to complete work after each call and NO does not permit
that time.
Maintenance and Troubleshooting Guide
March 2008
657
658
Maintenance and Troubleshooting Guide
March 2008
Failed to find linked job file
A process cannot find a job file identified as a linked job.
Description
A process cannot find a job file identified as a linked job.
Maintenance and Troubleshooting Guide
March 2008
659
660
Maintenance and Troubleshooting Guide
March 2008
Unable to open keys file
An application cannot open because it cannot create the necessary command keys for its
screen.
Description
When creating the screen for applications, the key file defines the command keys. An
application cannot open because it cannot create the necessary command keys for its screen.
Maintenance and Troubleshooting Guide
March 2008
661
662
Maintenance and Troubleshooting Guide
March 2008
Failed to get message queue
A process was unable to access the message queue.
Description
During IPC communication with opmon, a process attempted to access the message queue and
could not.
Maintenance and Troubleshooting Guide
March 2008
663
664
Maintenance and Troubleshooting Guide
March 2008
Unable to receive a message
A process was unable to receive an IPC message.
Description
During IPC communication with opmon, a process attempted to receive an IPC message and
could not.
Maintenance and Troubleshooting Guide
March 2008
665
666
Maintenance and Troubleshooting Guide
March 2008
Failed to send message
A process was unable to send a IPC message.
Description
During IPC communication with opmon, a process attempted to send an IPC message and
could not.
Maintenance and Troubleshooting Guide
March 2008
667
668
Maintenance and Troubleshooting Guide
March 2008
No more records
When editing calling lists, the user attempts to access the next record when no more records
exist.
Description
When editing calling lists, the user attempts to access the next record when no more records
exist.
Maintenance and Troubleshooting Guide
March 2008
669
670
Maintenance and Troubleshooting Guide
March 2008
Field has non-numeric value
An agent has entered a non-numeric value in a field that only accepts numeric entries.
Description
An agent has entered a non-numeric value in a field that only accepts numeric entries.
Maintenance and Troubleshooting Guide
March 2008
671
672
Maintenance and Troubleshooting Guide
March 2008
No previous record
When editing calling lists, the user attempts to access a previous record when no previous
record exists.
Description
When editing calling lists, the user attempts to access a previous record when no previous
record exists.
Maintenance and Troubleshooting Guide
March 2008
673
674
Maintenance and Troubleshooting Guide
March 2008
Failed to process file <filename>
A process could not open the <filename> file.
Description
A process could not open the <filename> file. The error message should include the name of
the process that failed to open the file.
Maintenance and Troubleshooting Guide
March 2008
675
676
Maintenance and Troubleshooting Guide
March 2008
Cannot be DONE from alternate screen
An agent has completed a call and enters DONE from the wrong screen.
Description
An agent has completed a call and enters DONE from the wrong screen. If the agent does not
enter DONE from the current screen, data about the call is not stored. So, agent must enter
DONE from current screen.
Maintenance and Troubleshooting Guide
March 2008
677
678
Maintenance and Troubleshooting Guide
March 2008
Non-directory in directory path
A path contains at least one child that is not a directory.
Description
A process tried to create a directory in a path that contains at least one child that is not a
directory.
Maintenance and Troubleshooting Guide
March 2008
679
680
Maintenance and Troubleshooting Guide
March 2008
<process_name> failed to read from file <filename>
The named process could not read the named file.
Description
The named process could not read the named file.
Maintenance and Troubleshooting Guide
March 2008
681
682
Maintenance and Troubleshooting Guide
March 2008
Recall not allowed for inbound call
An agent tried to set up a recall for an inbound call.
Description
An agent tried to set up a recall for an inbound call. Recalls are not permitted for inbound calls.
Maintenance and Troubleshooting Guide
March 2008
683
684
Maintenance and Troubleshooting Guide
March 2008
No record found
During a Avaya Proactive Contact system search for a previous record, no record is found.
Description
During a Avaya Proactive Contact system search for a previous record, no record is found.
Maintenance and Troubleshooting Guide
March 2008
685
686
Maintenance and Troubleshooting Guide
March 2008
No REL_DIST setting
The job file does not contain the REL_DIST field.
Description
The job file does not contain the REL_DIST field. The REL_DIST field, used for testing, has a
value of YES for released versions of Avaya Proactive Contact and NO for unreleased versions.
Maintenance and Troubleshooting Guide
March 2008
687
688
Maintenance and Troubleshooting Guide
March 2008
No REL_TME setting
The job file does not contain the REL_TME field.
Description
The job file does not contain the REL_TME field. The REL_TME field, used for testing, has a
value of YES for wait to release test call and NO for to release test call immediately.
Maintenance and Troubleshooting Guide
March 2008
689
690
Maintenance and Troubleshooting Guide
March 2008
Failed to remove shared memory
A process failed to remove a segment of shared memory.
Description
Shared memory structures are used for headsets among other things. This error message is
usually generated by processes involved with headsets.
Maintenance and Troubleshooting Guide
March 2008
691
692
Maintenance and Troubleshooting Guide
March 2008
Sales verification with unit work lists is not permitted
An agent tried to do sales verification with a unit work list.
Description
Since sales verification and unit work lists are both peer types of outbound jobs, you cannot do
sales verification with unit work lists.
Maintenance and Troubleshooting Guide
March 2008
693
694
Maintenance and Troubleshooting Guide
March 2008
Missing std to dial phone number format
A job is attempting to make calls from a calling list and finds a phone number that is not in
standard to dial format.
Description
A job is attempting to make calls from a calling list and finds a phone number that is not in
standard to dial format. This is a common error.
Maintenance and Troubleshooting Guide
March 2008
695
696
Maintenance and Troubleshooting Guide
March 2008
Not a calling list
During a data transfer, the process expects a calling list and the file accessed is not a calling list.
Description
This error occurs during data transfer. If the error occurs during a readtape action, the error
message should mention readtape.
Maintenance and Troubleshooting Guide
March 2008
697
698
Maintenance and Troubleshooting Guide
March 2008
Unable to become root privilege for setting password
An agent tried to set a password but did not have root privileges.
Description
An agent tried to set a password but did not have root privileges.
Maintenance and Troubleshooting Guide
March 2008
699
700
Maintenance and Troubleshooting Guide
March 2008
Cannot find time zone for phone number
A process is checking telephone numbers in standard format and cannot find the time zone
designation for a number.
Description
A process is checking telephone numbers in standard format and cannot find the time zone
designation for a number.
Maintenance and Troubleshooting Guide
March 2008
701
702
Maintenance and Troubleshooting Guide
March 2008
Failed to create window pointer
When constructing the GUI, the system did not create a window pointer.
Description
When constructing the GUI, the system did not create a cursor.
Maintenance and Troubleshooting Guide
March 2008
703
704
Maintenance and Troubleshooting Guide
March 2008
Failed to write to file <filename>
A process attempted to write to a file and failed.
Description
A process attempted to write to a file and failed. frequently the process is attempting to copy the
contents of a buffer into a file when this error message occurs.
Maintenance and Troubleshooting Guide
March 2008
705
706
Maintenance and Troubleshooting Guide
March 2008
Only outbound agents permitted by sales verification
A non-outbound agent tried to join a sales verification job.
Description
Sales verification jobs can only be done by outbound agents.
Maintenance and Troubleshooting Guide
March 2008
707
708
Maintenance and Troubleshooting Guide
March 2008
Outbound or Managed agents only permitted
An agent that was not an outbound or managed agent tried to join this job.
Description
The current job requires outbound or managed agents. An agent who is neither type tried to join
this job.
Maintenance and Troubleshooting Guide
March 2008
709
710
Maintenance and Troubleshooting Guide
March 2008
<opname> operation failed
The named operation did not complete successfully.
Description
The named operation did not complete successfully. This error usually occurs when the
listserver binary attempts to start the callsel binary.
Maintenance and Troubleshooting Guide
March 2008
711
712
Maintenance and Troubleshooting Guide
March 2008
<op_name> operation failed for file <file_name>
The named operation on the named file did not complete successfully.
Description
A process tried to complete an operation, often a read or write, on a file and was unsuccessful.
Maintenance and Troubleshooting Guide
March 2008
713
714
Maintenance and Troubleshooting Guide
March 2008
<string><string>- Operator number returned wrong
<num1>, job number <num2>
An operator slot could not be released.
Description
An operator slot could not be released.
Maintenance and Troubleshooting Guide
March 2008
715
716
Maintenance and Troubleshooting Guide
March 2008
Operator slot semaphore not available
A process tries to access the operator slot base in shared memory and cannot.
Description
A process tries to access the operator slot base in shared memory and cannot. This error can
occur when accessing the operator slot base or releasing it.
Maintenance and Troubleshooting Guide
March 2008
717
718
Maintenance and Troubleshooting Guide
March 2008
Headset value (<headset_value>, <return_value>) out of
bound
When the operator process is running in test mode, a headset value is encountered that is not
within the prescribed headset values.
Description
When the operator process is running in test mode, a headset value is encountered that is not
within the prescribed headset values
Maintenance and Troubleshooting Guide
March 2008
719
720
Maintenance and Troubleshooting Guide
March 2008
Outbound agents only permitted
An agent other than an outbound agent tried to access an outbound job.
Description
An agent other than an outbound agent tried to access an outbound job.
Maintenance and Troubleshooting Guide
March 2008
721
722
Maintenance and Troubleshooting Guide
March 2008
Pattern error at line <number>
A process is running a script and finds a pattern error in the script at line number <num>.
Description
A process is running a script and finds a pattern error in the script at line number <num>.
Maintenance and Troubleshooting Guide
March 2008
723
724
Maintenance and Troubleshooting Guide
March 2008
Pattern error
A process needs to make a selection of data and the pattern used for the selection contains an
error.
Description
A process needs to make a selection of data and the pattern used for the selection contains an
error. This error can occur reading and writing tapes, selecting fields from a record, and other
areas where a selection criteria in the form of a pattern is used. The error message references
the code that generated the error message.
Maintenance and Troubleshooting Guide
March 2008
725
726
Maintenance and Troubleshooting Guide
March 2008
Telephone line not available
A telephone line is not available.
Description
A telephone line is not available for the agent’s current activity. The agent activity may be:
a. Trying to hang up a call, but there is no call to hang up.
b. Trying to place a call on hold and there is no open telephone line to place on hold.
c. Transferring a call and Avaya Proactive Contact does not have a telephone line
available to place the transfer call.
d. Dialing preview (no telephone line available). This message results when Avaya
Proactive Contact is placing the preview call.
e. Performing a recall scheduled for current date and time, but no telephone line is
available to place the outbound call.
f. While there was a call on hold, it is not available to restore. The customer hung up
while on hold.
Maintenance and Troubleshooting Guide
March 2008
727
728
Maintenance and Troubleshooting Guide
March 2008
Telephone line not offhook
An agent tried an activity that required an offhook phone and the phone was not off hook.
Description
An agent tried an activity that required an offhook phone and the phone was not off hook. The
agent was trying to do one of the following activities:
●
Adjust the headset volume and has an open telephone line that is on hold.
●
Place a call on hold while there is an open telephone line, there is no call to place on hold.
This message may mean the agent has already placed the call on hold.
●
Transfer a call and there is no call to transfer.
●
Take a call off hold and there is no call on hold.
Maintenance and Troubleshooting Guide
March 2008
729
730
Maintenance and Troubleshooting Guide
March 2008
Phone number too long
In converting a calling list phone number to the standard to dial format, the length of the
telephone number becomes too long.
Description
In converting a calling list phone number to the standard to dial format, the length of the
telephone number becomes too long.
Resolution
To resolve this issue, follow these steps:
1. Open the calling list that generated the error.
2. Inspect the phone numbers for irregularities.
3. Shorten any abnormally long phone numbers.
4. Rerun the process.
Maintenance and Troubleshooting Guide
March 2008
731
732
Maintenance and Troubleshooting Guide
March 2008
Timed out waiting for response from porter
While an agent was manually making calls, the screen failed to display the number, because
porter timed out.
Description
While an agent was manually making calls, the screen failed to display the number, because
porter timed out.
Maintenance and Troubleshooting Guide
March 2008
733
734
Maintenance and Troubleshooting Guide
March 2008
Password can not be changed, change limit not expired
An agent attempted to change a password and could not.
Description
An agent attempted to change a password and could not because the default time limit for
password changes had not been reached.
Maintenance and Troubleshooting Guide
March 2008
735
736
Maintenance and Troubleshooting Guide
March 2008
Preview record search failed to initialize
The preview record search (pvrs) failed to initialize.
Description
The preview record search (pvrs) failed to initialize. Note that several conditions must be met
before pvrs runs successfully. Consult the pvrs_helpers.c source code for more information.
Maintenance and Troubleshooting Guide
March 2008
737
738
Maintenance and Troubleshooting Guide
March 2008
Changes to record not saved
An agent made changes to a record that were not saved.
Description
An agent made changes to a record that were not saved. It may be that the record was locked
so that changes could not be made.
Maintenance and Troubleshooting Guide
March 2008
739
740
Maintenance and Troubleshooting Guide
March 2008
Recall can't be less than <num> minutes
A recall cannot be less than <num> minutes from the current time.
Description
A agent has tried to set up a recall that is less than the number of minutes allowed. This recall
limit is set by the RECALLLIMIT entry in the locale.cfg file.
Maintenance and Troubleshooting Guide
March 2008
741
742
Maintenance and Troubleshooting Guide
March 2008
Range does not come after previous range
A process accessed the recall attempt range and found an error in the attempt range parameter.
Description
A process accessed the recall attempt range and found an error in the attempt range parameter.
Maintenance and Troubleshooting Guide
March 2008
743
744
Maintenance and Troubleshooting Guide
March 2008
Recall time and date outside timezone
Recall time is outside the limits for the time zone.
Description
The recall time setting is for the Avaya Proactive Contact system time. However, the telephone
to recall is in a different time zone. In that time zone, the recall time setting is outside the legal
boundaries for placing calls to customers.
Maintenance and Troubleshooting Guide
March 2008
745
746
Maintenance and Troubleshooting Guide
March 2008
Record is no longer available
A process tried to access a record that is no longer available.
Description
A process tried to access a record that is no longer available. In most cases the process is
either a call transfer or involves editing a record.
Maintenance and Troubleshooting Guide
March 2008
747
748
Maintenance and Troubleshooting Guide
March 2008
Record currently in use
A call strategy process tired to access a record, but it was in use by another process.
Description
A call strategy process tired to access a record, but it was in use by another process. This
means the file is locked by the other process.
Maintenance and Troubleshooting Guide
March 2008
749
750
Maintenance and Troubleshooting Guide
March 2008
Rejected phone number (L<num>)
A process is checking phone numbers in a calling list and rejects the phone number on line
<num> when comparing it to the standard phone number for the list.
Description
A process is checking phone numbers in a calling list and rejects the phone number on line
<num> when comparing it to the standard phone number for the list.
Maintenance and Troubleshooting Guide
March 2008
751
752
Maintenance and Troubleshooting Guide
March 2008
Field entry is required
An agent has left a required field on a screen blank.
Description
An agent has left a required field on a screen blank.
Maintenance and Troubleshooting Guide
March 2008
753
754
Maintenance and Troubleshooting Guide
March 2008
Route End Error: RegReqID = <num>, CrossRefID =
<num>, Error = <num>
For some reason the route end is not available.
Description
This error message has two distinct variations:
1. Route End Error: REqREqID??=1, CrossRefID??=70585, Error = 33
Avaya Proactive Contact with CTI uses an extension to an announcement port on the
switch to play voice messages and this is not set up.
2. Route End Error: REqREqID??=1, CrossRefID??=12661, Error = 14
A CTI process encountered a invalid destination address.
Maintenance and Troubleshooting Guide
March 2008
755
756
Maintenance and Troubleshooting Guide
March 2008
Report failed, system out of space
A process was attempting to create a report and ran out of disk space.
Description
A process was attempting to create a report and ran out of disk space.
Maintenance and Troubleshooting Guide
March 2008
757
758
Maintenance and Troubleshooting Guide
March 2008
Molocale - unknown language name <lang>
During language localization, the language provided as a secondary language for display is
unrecognized.
Description
The LANG_SECONDARY keyword in the $VOICEDIR/etc/master.cfg file is set to an
unrecognized language.
Maintenance and Troubleshooting Guide
March 2008
759
760
Maintenance and Troubleshooting Guide
March 2008
Selection list not available for use
A client application has tried to start one or more jobs and was unsuccessful.
Description
A client application has tried to start one or more jobs and was unsuccessful. The process could
not use the record selection list for one or more jobs because it was unavailable.
Maintenance and Troubleshooting Guide
March 2008
761
762
Maintenance and Troubleshooting Guide
March 2008
Could not verify selection list for job
A client application has tried to start one or more jobs and was unsuccessful.
Description
A client application has tried to start one or more jobs and was unsuccessful. The process could
could not verify the record selection list for the job. This error occurs if the new list download has
happened after the selection was run.
Maintenance and Troubleshooting Guide
March 2008
763
764
Maintenance and Troubleshooting Guide
March 2008
Selection list not created with this calling list
A client application has tried to start one or more jobs and was unsuccessful.
Description
A client application has tried to start one or more jobs and was unsuccessful. The selection list
in use was not created with this calling list.
Maintenance and Troubleshooting Guide
March 2008
765
766
Maintenance and Troubleshooting Guide
March 2008
Could not verify selection list for job
A client application has tried to start one or more jobs and was unsuccessful.
Description
A client application has tried to start one or more jobs and was unsuccessful. The process could
could not verify the record selection list for the job. This error occurs if the new list download has
happened after the selection was run.
Resolution
To resolve this issue, rerun the selection.
Maintenance and Troubleshooting Guide
March 2008
767
768
Maintenance and Troubleshooting Guide
March 2008
Cannot find service in /etc/services
A process attempts to find the IP address of a service and the service does not exist.
Description
A process attempts to find the IP address of a service and the service does not exist. This error
occurs in a module that provides functions to FileStore, Directory and DateGenerator functions
elsewhere in the code.
Maintenance and Troubleshooting Guide
March 2008
769
770
Maintenance and Troubleshooting Guide
March 2008
Caught signal number <num>
Many different processes generate this error.
Description
Many different processes generate this error.
Maintenance and Troubleshooting Guide
March 2008
771
772
Maintenance and Troubleshooting Guide
March 2008
Caught signal <num> and terminated
A process got a signal <num> and terminated.
Description
The error message identifies the process that terminated and the signal number that caused the
termination.
Maintenance and Troubleshooting Guide
March 2008
773
774
Maintenance and Troubleshooting Guide
March 2008
Socket call failed
A server process attempted to accept a client connect request and the socket request failed.
Description
A server process attempted to accept a client connect request and the socket request failed.
This error occurs in a module that provides functions to FileStore, Directory and DateGenerator
functions elsewhere in the code.
Maintenance and Troubleshooting Guide
March 2008
775
776
Maintenance and Troubleshooting Guide
March 2008
Unable to setup listen on socket
A server process attempted to accept a client connect request and cannot set up to listen on the
socket.
Description
A server process attempted to accept a client connect request and cannot set up to listen on the
socket. This error occurs in a module that provides functions to FileStore, Directory and
DateGenerator functions elsewhere in the code.
Maintenance and Troubleshooting Guide
March 2008
777
778
Maintenance and Troubleshooting Guide
March 2008
Socket failed
A socket for a connection to a server failed.
Description
While trying to access a calling list, a socket for a connection to the server hosting the calling list
failed.
Maintenance and Troubleshooting Guide
March 2008
779
780
Maintenance and Troubleshooting Guide
March 2008
Socket connection to list server running on <name> failed
A socket connection to a list server running on the named server failed.
Description
While trying to access a calling list, a socket connection to a list server running on the named
server failed.
Maintenance and Troubleshooting Guide
March 2008
781
782
Maintenance and Troubleshooting Guide
March 2008
STATUSFLAG field missing
The current record does contain a STATUSFLAG field.
Description
During an attempt to mark a record as do not call, the system did not find a STATUSFLAG field
in the record.
Maintenance and Troubleshooting Guide
March 2008
783
784
Maintenance and Troubleshooting Guide
March 2008
Failed to process line (<line_buffer_name>)
As a process attempts to read the switch configuration file, it cannot process a line of the file.
Description
As a process attempts to read the switch configuration file, it cannot process a line of the file.
Maintenance and Troubleshooting Guide
March 2008
785
786
Maintenance and Troubleshooting Guide
March 2008
tget returned error number <num> raising signal <num>
The user typed input that causes the system to terminate.
Description
The user typed input that causes the system to terminate.
Maintenance and Troubleshooting Guide
March 2008
787
788
Maintenance and Troubleshooting Guide
March 2008
<string>-<string>
This error message identifies the process that generated the error message and the object of
the process.
Description
This error message identifies the process that generated the error message and the object of
the process.
Maintenance and Troubleshooting Guide
March 2008
789
790
Maintenance and Troubleshooting Guide
March 2008
Timed out waiting for <string> confirmation
A process, waiting for an IPC message reply, times out.
Description
A process, waiting for an IPC message reply, times out.
Maintenance and Troubleshooting Guide
March 2008
791
792
Maintenance and Troubleshooting Guide
March 2008
Calling list <name> is not in shared memory
A calling list/dictionary <name> is being processing and the calling list/dictionary cannot be
loaded into shared memory.
Description
A calling list/dictionary <name> is being processing and the calling list/dictionary cannot be
loaded into shared memory.
Maintenance and Troubleshooting Guide
March 2008
793
794
Maintenance and Troubleshooting Guide
March 2008
Calling list line count does not match shared memory
While processing a calling list, the system determines that the calling list line count does not
match the shared memory version.
Description
While processing a calling list, the system determines that the calling list line count does not
match the shared memory version.
Maintenance and Troubleshooting Guide
March 2008
795
796
Maintenance and Troubleshooting Guide
March 2008
Invalid normal trunk equipment number <num>
A process accessed a trunk number for a headset or other equipment and found an invalid
value.
Description
A process accessed a trunk number for a headset or other equipment and found an invalid
value.The $VOICEDIR/config/dgswitch.cfg file contains the accepted trunk port numbers.
Maintenance and Troubleshooting Guide
March 2008
797
798
Maintenance and Troubleshooting Guide
March 2008
Normal trunk port number <num> out of range
A process accessed the trunk port numbers and found an out of range value.
Description
A process accessed the trunk port numbers and found an out of range value. The $VOICEDIR/
config/dgswitch.cfg file contains the accepted trunk port numbers.
Maintenance and Troubleshooting Guide
March 2008
799
800
Maintenance and Troubleshooting Guide
March 2008
Unable to bind to local address
A server process attempted to accept a client connect request and cannot bind to the local
address.
Description
A server process attempted to accept a client connect request and cannot bind to the local
address. This error occurs in a module that provides functions to FileStore, Directory and
DateGenerator functions elsewhere in the code.
Maintenance and Troubleshooting Guide
March 2008
801
802
Maintenance and Troubleshooting Guide
March 2008
Unable to accept connection on socket
A server process attempted to accept a client connect request and cannot accept connection on
the socket.
Description
A server process attempted to accept a client connect request and cannot accept connection on
the socket. This error occurs in a module that provides functions to FileStore, Directory and
DateGenerator functions elsewhere in the code.
Maintenance and Troubleshooting Guide
March 2008
803
804
Maintenance and Troubleshooting Guide
March 2008
Unable to access host <name> using name
A process tried to unsuccessfully access a host using its name.
Description
A process associated with calling lists tried to unsuccessfully access a host using its name. If
the process is trying to establish a connection with the list server on the server identified in the
list client host_name, it uses the default LSERVPORT value for the server.
Maintenance and Troubleshooting Guide
March 2008
805
806
Maintenance and Troubleshooting Guide
March 2008
Unable to connect to socket
A client process attempted to connect to a server and cannot connect to the socket on the
server.
Description
A client process attempted to connect to a server and cannot connect to the socket on the
server. This error occurs in a module that provides functions to FileStore, Directory and
DateGenerator functions elsewhere in the code.
Maintenance and Troubleshooting Guide
March 2008
807
808
Maintenance and Troubleshooting Guide
March 2008
Failed to create directory
A process attempted to create a directory and failed.
Description
This error can occur in a wide range of circumstances. The error message contains the name of
the directory that could not be created.
Maintenance and Troubleshooting Guide
March 2008
809
810
Maintenance and Troubleshooting Guide
March 2008
Failed to read calling list definition
A process tried to read a calling list definition and failed.
Description
A process tried to read a calling list definition and failed. This error message can occur in a wide
range of circumstances.
Maintenance and Troubleshooting Guide
March 2008
811
812
Maintenance and Troubleshooting Guide
March 2008
Unable to open list <calling_list_name>
A process tried to unsuccessfully open the named calling list.
Description
A process tried to unsuccessfully open the named calling list.
Maintenance and Troubleshooting Guide
March 2008
813
814
Maintenance and Troubleshooting Guide
March 2008
Process unable to send <string> to <process_name>
A process needs to send a string to another process and cannot.
Description
A process needs to send a string to another process and cannot. The error message names
both processes and the string.
Maintenance and Troubleshooting Guide
March 2008
815
816
Maintenance and Troubleshooting Guide
March 2008
Unable to send data to socket
A process attempted to send data to a socket and the connection is gone.
Description
A process attempted to send data to a socket and the connection is gone. This error occurs in a
module that provides functions to FileStore, Directory and DateGenerator functions elsewhere
in the code.
Maintenance and Troubleshooting Guide
March 2008
817
818
Maintenance and Troubleshooting Guide
March 2008
Molocale - failed to set locale <name>
The system is trying to set a language for a locale and cannot.
Description
The system is trying to set a language for a locale and cannot.
Maintenance and Troubleshooting Guide
March 2008
819
820
Maintenance and Troubleshooting Guide
March 2008
Call blending is not available
An agent is trying to log on to dispatcher for call blending when call blending is not available.
Description
An agent is trying to log on to dispatcher for call blending when call blending is not available.
The dispatcher process acquires and releases agents for outbound calling. Dispatcher is the
sole interface between the Agent Blending system and the outbound calling system.
Maintenance and Troubleshooting Guide
March 2008
821
822
Maintenance and Troubleshooting Guide
March 2008
Unequal phone number field lengths in file <filename>
A process is reading the file <filename> and finds unequal phone number lengths.
Description
A process is reading the file <filename> and finds unequal phone number lengths. The function
that generates this error is used to read a file such as. callselnum that contains numbers in text
string form.
Maintenance and Troubleshooting Guide
March 2008
823
824
Maintenance and Troubleshooting Guide
March 2008
Unknown Command message - <command>
<command> is the text string that the agent binary received as the command and did not
recognize.
Description
The error typically occurs when an API call contains an undefined command.
Maintenance and Troubleshooting Guide
March 2008
825
826
Maintenance and Troubleshooting Guide
March 2008
Unknown IPC message - <string>
While processing IPC messages, the system encounters <string> that is not a known IPC
message.
Description
While processing IPC messages, the system encounters <string> that is not a known IPC
message.
Maintenance and Troubleshooting Guide
March 2008
827
828
Maintenance and Troubleshooting Guide
March 2008
Incorrect job type
Agent command issued with an unknown job type.
Description
This error most likely occurred while executing the AGTListJobs API call. The job types are
●
(A) all
●
(I) inbound
●
(B) blend
●
(M) Managed Dialing
●
(O) outbound, including Unit Work List and Sales Verification
Maintenance and Troubleshooting Guide
March 2008
829
830
Maintenance and Troubleshooting Guide
March 2008
Unknown screen type
An agent is attempting to use a screen type that is unknown to the system.
Description
An agent is attempting to use a screen type that is unknown to the system. Screen types are
defined in *.init files.
Maintenance and Troubleshooting Guide
March 2008
831
832
Maintenance and Troubleshooting Guide
March 2008
Unit value not found, or unavailable
A unit work list was not found.
Description
An agent attempted to attach to a unit work list that either did not exist or was in use.
Maintenance and Troubleshooting Guide
March 2008
833
834
Maintenance and Troubleshooting Guide
March 2008
Linking between virtual agent jobs and non-virtual jobs is
not permitted
In an effort to link one job to another, one job is virtual and the other is non-virtual.
Description
When linking two agent jobs, both jobs must be either virtual or non-virtual. This error occurs
when one job is virtual and the other is non-virtual which nullifies the requested link.
Maintenance and Troubleshooting Guide
March 2008
835
836
Maintenance and Troubleshooting Guide
March 2008
Unable to open file
Calling code cannot open specified file.
Description
This error is one of the most common errors displayed by Avaya Proactive Contact. However, in
almost all cases, the error message contains the name of the process that generated the error
code and the name of the file that the process could not open.
Maintenance and Troubleshooting Guide
March 2008
837
838
Maintenance and Troubleshooting Guide
March 2008
Failed to find screen <name>
System could not display Window’s application <name> screen.
Description
System could not display Window’s application <name> screen. This error occurs when trying
to load the information held in shared memory.
Maintenance and Troubleshooting Guide
March 2008
839
840
Maintenance and Troubleshooting Guide
March 2008
Write error
An attempt to write to a file generated an error.
Description
This error can occur for a variety of these reasons:
●
In writing a calling list, the error message tells you that the process wrote one value when
another was expected.
Maintenance and Troubleshooting Guide
March 2008
841
842
Maintenance and Troubleshooting Guide
March 2008
Index
backing up system. . . . . . .
backing up system configuration
backing up system data . . . .
verifying in archive. . . . . . .
A
archive
restoring files . . . . . . . . . . . . . . . . . . 45
verifying archive contents . . . . . . . . . . . . 46
verifying files . . . . . . . . . . . . . . . . . . 46
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
48
47
41
49
39
41
42
43
44
42
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
48
47
42
48
49
C
calling lists
backing up a specific list
backing up all. . . . . .
backing up one . . . . .
restoring . . . . . . . .
restoring a specific list .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
D
DAT drive status . . . . . .
data
backing up . . . . . . .
backing up statistics files
restoring . . . . . . . .
restoring from . . . . .
database
backing up . . . . . . .
restoring . . . . . . . .
DDS tape . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
42
43
44
46
L
LEDs, tape drive . . . . . . . . . . . . . . . . . . 40
lists
backing up . . . . . . . . . . . . . . . . . . . 48
restoring . . . . . . . . . . . . . . . . . . . . 49
M
monitoring
DAT drive status, LEDs . . . . . . . . . . . . . 40
O
operating system, backing up . . . . . . . . .
/opt/avaya/pds/account/* . . . . . . .
/opt/avaya/pds/lists/*.stat . . . . . .
/opt/avaya/pds/lists/history/*.hist
/opt/avaya/pds/xfer/clist . . . . . . .
/opt/oracle/oradata . . . . . . . . . . .
R
.
.
.
.
restoring
a specific calling list
calling list . . . . .
data, from . . . . .
database . . . . .
files from archive .
guidelines . . . . .
.
.
.
.
.
.
.
.
G
. . . . . . . . . . . . 40
.
.
.
.
.
.
.
.
guidelines
backing up . . . . . . . . . . . . . . . . . . . 39
restoring . . . . . . . . . . . . . . . . . . . . 39
B
backing up
a specific calling list . . . . . .
calling lists, all . . . . . . . .
complete system . . . . . . .
database . . . . . . . . . . .
guidelines . . . . . . . . . .
operating system . . . . . . .
system and calling lists . . . .
system configuration files . . .
system data and statistics files .
system files . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
49
44
50
44
. . . . . . . . . . . . 49
. . . . . . . . . . . . 50
. . . . . . . . . . . . 39
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 41
. 44
. 44
. 44
42, 47
49, 50
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
49
48
44
50
45
39
S
F
fbackup utility . . . . . . . . . . . . . . . . . . . 44
files
Maintenance and Troubleshooting Guide
statistics
backing up system data . . . . . . . . . . . . . 44
system
March 2008
843
back up . . . . . . . . . .
backing up calling lists . . .
backing up configuration files
backing up files . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41
42
43
42
T
tape storage environment . . . . . . . . . . . . . 39
V
validating
archive contents
files in archive .
verifying
archive contents
files in archive .
844
. . . . . . . . . . . . . . . . 46
. . . . . . . . . . . . . . . . 46
. . . . . . . . . . . . . . . . 46
. . . . . . . . . . . . . . . . 46
Maintenance and Troubleshooting Guide
March 2008