EFFI-BL
Last update : May 17, 2013
Please take a while to consider and read this brochure before using your new device
If you have any doubt, please refer to the datasheet
http://www.effilux.fr/files/effilux/datasheet/datasheet-EFFI-BL-en.pdf
Warning









Do not look directly or with any optical instrument the device
Clean the output with a soft tissue and alcohol
IP54 Classification: Do not immerse the device in water or any other liquid
Use the device in an environment at -10°C à +50°C with no excessive moisture: humidity and high
temperature could damage the device
Do not use the device in an environment with oil fumes, steam and moisture.
Do never try to fix any damage to the EFFI-BL by yourself.
Make sure you are using a correct power supply before connecting the device
Do not inverse electrical polarity – check your connections and the conventions before turning on the power
supply
Make sure you consider an adapted connector to link the device to the power supply
Any improper use voids the warranty
EFFILUX
7, avenue de l’Atlantique
91940 Les Ulis
FRANCE
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
EFFI-BL
Last update : May 17, 2013
Electronics
Optics
Mechanics
Environment
Power supply
Illumination mode
Connectors
Power consumption
Cable length
Wavelength
Output window
Thickness
Dimensions
Fastener
Material
Working temperature
IP code
EFFILUX
7, avenue de l’Atlantique
91940 Les Ulis
FRANCE
24V DC
Continuous with a DIM process [0,24V]
M12 4 pins
Related to the dimensions of the device
500mm from the side to the connector
Various wavelengths (blue, red, green, IR and white)
Opalin to homogenize the light repartition
43.2mm
Any multiple of 50mm
A groove all around the device
Base and side panels : Aluminum alloy ; Diffusion plate : acrylic
0°C to 50°C (no condensation)
IP54
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
EFFI-BL
Last update : May 17, 2013
Presentation of the device
Length = optical length + 39mm
35mm
M12 connector
with 500mm
1.5mm
43.2 mm
Width = optical width + 39mm
12.65 mm
Configuration B
Configuration A
Connector 2
14.15 mm
12.65 mm
90 mm
60 mm
35 mm
Connector 1
Connector 2
EFFILUX
7, avenue de l’Atlantique
91940 Les Ulis
FRANCE
Connector 1
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr
EFFI-BL
Last update : May 17, 2013
Remarks concerning the power supply
Prepare all the set up before connecting the device to the power supply.
First connect the device to the power supply and then turn on the power supply.
Respect electrical conventions when you connect the device to the power supply.
Single connector configuration
Pin number
1
2
3
4
Cable color
Brown
White
Blue
Black
Designation
+24V
n.a.
GND
DIM – max 24V
45°
2
3
1
4
The DIM pin has to be connected to turn on the device
Pin number
1
Cable color
Brown
Designation
+24V
2
White
n.a.
3
Blue
GND
4
Black
DIM
Connector 2
Connector 1
Multiple connectors configuration
Pin number
1
Cable color
Brown
Designation
+24V
2
White
n.a.
3
Blue
GND
4
Black
Not connected
Unstable regime
Electrical behavior
Make sure that you never exceed the maximum voltage.
The device is supplied with a 24V (±5%) constant voltage
source.
1V
3V
Please contact EFFILUX technical support for additional details
EFFILUX
7, avenue de l’Atlantique
91940 Les Ulis
FRANCE
Tel : +33 9 72 38 17 80
Fax : +33 9 72 11 21 69
Email : contact@effilux.fr