1
© 2002 Hunter Fan Company
41803-01 11/14/2002
2
®
Your new Hunter® ceiling fan is an addition to your home or office
that will provide comfort and performance for many years. This
installation and operation manual gives you complete instructions
for installing and operating your fan.
We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.
Before installing your fan, record the following information for your
records and warranty assistance. Please refer to the carton and the
Hunter nameplate label (located on the top of the fan motor housing) for the proper information.
Model Name: __________________________
Catalog/Model No.: ______________
Serial No.: _____________________
Date Purchased: ___ / ___ / ______
Where Purchased: _______________________________
Please also attach your receipt or a copy of your receipt for reference.
Easy LockTM Blade System
Your new Hunter ceiling fan includes our exclusive Easy LockTM blade
assembly which locks the blades in place without tools and eliminates up to 40 parts. It also allows easy removal of the blades for
cleaning.
cautions and warnings
•
•
•
•
•
•
•
Read een
ntir
o ok l et ccaare full
in
iree bbo
ullyy bbee fore bbeeg inn
innin
ingg in
insst all ati on. SSaave tth
he s e in
insstruc ti ons .
Us
nl
un
Usee oonl
nlyy H
Hun
untter rreep l acement p
paar t s .
To rree du
he rrii sk ooff p
jur
he ffaan
ducce tth
peers onal in
injur
juryy, aattt ach tth
din
he bbuil
uil
he ssup
up
p or t ssttruc tur
dir
o tth
uildin
dingg aaccuree ooff tth
upp
diree c tly tto
nl
he hhaardnd uuss e oonl
o tth
hes e in
cordin
nlyy tth
inss tr ucti ons , aan
dingg tto
up
p lilieed.
w are ssup
upp
To aavv o id p
os sib
ho ck , bbee fore in
po
sibll e eell e c tri c al ssh
inss t allin
llingg
y our ffaan, di
he p
ow er bbyy ttur
ur
n in
he ccir
ir
diss conn
nneec t tth
po
urn
ingg ooff f tth
ir-cui
o tth
he oou
utl et bbo
ox aan
nd aass s o ci ate d w
uitt bbrreaker s tto
waall
s wi tch llo
o c ati on. IIff yyo
ou ccaann
ot llo
o ck tth
he ccir
ir
nno
irccui
uitt bbrreaker s in tth
h e ooff f p
osi
po
sitti on, ssee cur
ureely ffaas ten a p
prromin
ineent
w ar nin
uch aass a ttaag , tto
o tth
he sseer vi ce p
ingg d
deev ice , ssu
paanel.
All w
ir
in
nd
wir
irin
ingg mu
muss t bbee in aacccordance w
wii th n
naati onal aan
l o c al eell e c tri c al cco
o des aan
nd A
N
S
I/N
F
P
A
70.
I
f
y
o
u
a
AN I/NF
If yo arre
un
f
a
m
ili
a
r
w
i
t
h
w
ir
in
g
,
y
o
u
s
h
o
ul
d
u
s
e
a
q
u
a
li
unf ilia wi wir
irin
ing yo sh uld us qu liff i ed eelle ct r i ci a n .
To rree du
he rrii sk ooff p
jur
on
ot bbeend tth
he
ducce tth
peer s onal in
injur
juryy, d
do
no
b l ad e aatttachm
hen in
hmeent ssyy stem w
wh
insst allin
llingg , bbaal ancin
ingg ,
or ccll eanin
he ffaan . N
oreig n oob
b j ec t s bbeeingg tth
Neev er in
inss er t ffo
t we en rro
o tatin
ingg ffaan bbll ad es .
To rree du
he rrii sk ooff ffir
ir
ho ck , oorr m
o to r
ducce tth
iree , eell e c tr ic al ssh
mo
d am a g e , d
on
ot uuss e a sso
o liliddp e e d cco
o n tr o l w
do
no
d-sst ate ssp
wiith
thi s ffaan . Us
nl
un
p e e d cco
o n tr o l s .
Usee oonl
nlyy H
Hun
untter ssp
41803-01 11/14/2002
getting ready
To install a ceiling fan, be sure you can do the following:
• Locate the ceiling joist or other suitable support in ceiling.
• Drill holes for and install wood screws.
• Identify and connect electrical wires.
• Lift 40 pounds.
If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician.
gathering the tools
You will need the following tools for installing the fan:
• Electric drill with 9/64" bit
• Standard screwdriver
• Phillips-head screwdriver
• Wrench or pliers
considering optional accessories
Consider using Hunter’s optional accessories, including a wallmounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet
and optimum performance of your Hunter fan, use only Hunter
speed controls.
checking your fan parts
Carefully unpack your fan to avoid damage to the fan parts. Check
for any shipping damage to the motor or fan blades. If one of the
fan blades was damaged in shipment, return all the blades for replacement.
NOTE: If you are installing more than one fan, keep the fan blades
in sets, as they were shipped.
If any parts are missing or damaged, contact your Hunter dealer or
call Hunter Parts Department at 888-830-1326.
®
understanding Installer’s Choice
This patented 3-position mounting system provides you maximum
installation flexibility and ease. You can install your Hunter fan in
one of three ways. The steps in this manual include specific instructions for the fan mounting method of your choice. For a ceiling 8
feet or higher, standard mounting is recommended.
Flu
oun
ingg (Figure 1) fits close to the ceiling, for low ceilings
lussh M
Mo
unttin
less than 8 feet high.
10”
Fi gur
lu
o un
uree 1 - FFlu
lussh m
mo
unttin
ingg
© 2002 Hunter Fan Company
3
S t a n d a rd M
oun
Mo
unttin
ingg (Figure 2) hangs from the ceiling by a downrod
(included), for ceilings 8 feet or higher. For ceilings higher than 8
feet, you can purchase Hunter extension downrods. All Hunter
fans use sturdy 3/4" diameter pipe to assure stability and wobblefree performance.
30” From
Wall or
Nearest
Obstruction
8’ Minimum
Ceiling Height
7’ Minimum
to Floor
12”
Fi gur
in
imum m
oun
uree 4 - M
Min
inimum
mo
unttin
ingg di
disst a nces
Fi gur
o un
uree 2 - SStt an d ard m
mo
unttin
ingg
Angl e M
oun
Mo
unttin
ingg (Figure 3) hangs from a vaulted or angled ceiling.
34º Max
8
Pitch
12
using an existing fan site
If you are preparing a new fan site, go to the p rep arin
ingg a n
neew ffaan
sitte section.
si
If you plan to use an existing fan site, complete the following checklist for the support brace, ceiling hole, outlet box, and wiring. If you
ingg a n
nee w ffaan si
sitte seccannot check off every item, see the prep ar in
tion for instructions on properly preparing the site for your new
fan.
fan support system
•
•
Fan must attach directly to building structure.
Fan support system must hold full weight of fan and light
kit.
ceiling hole
Fi gur
ngl e m
o un
uree 3 - A
An
mo
unttin
ingg
preparing the fan site
These guidelines are designed to help you select the best location
for your fan and to prepare the site prior to installing the fan. Proper
ceiling fan location and attachment to the building structure are
essential for safety, reliable operation, maximum efficiency, and energy savings.
choosing the fan site
Within the room where you want to install the fan, choose a fan
site where:
• No object can come in contact with the rotating fan blades
during normal operation.
• The fan blades are at least 7 feet above the floor and the
ceiling is at least 8 feet high.
• The fan blades have no obstructions to air flow, such as
walls or posts, within 30 inches of the fan blade tips.
• The fan is directly below a joist or support brace that will
hold the outlet box and the full weight of the fan.
See Figure 4 for the minimum mounting distances.
© 2002 Hunter Fan Company
•
Outlet box clearance hole directly below the joist or support brace.
outlet box
•
•
•
•
UL-approved octagonal 4" x 1-1/2" outlet box (or as specified by the support brace manufacturer).
Outlet box secured to joist or support brace by wood
screws and washers through inner holes of outlet box.
Outer holes of outlet box aligned with joist or support
brace.
Bottom of outlet box recessed a minimum of 1/16" into
ceiling.
41803-01 11/14/2002
4
1.
wiring
•
Electrical cable secured to outlet box by approved connector.
• Six inches of lead wires extend from outlet box.
See Figure 5 for an adequate existing fan site.
Ceiling Joist
Support Brace
2.
installing the outlet box
1.
Approved
Connector
2.
3.
4.
Washer
Ceiling
Wood Screw
Attach a 2" x 4" support brace between two joists. The support brace must allow the bottom of the outlet box to be recessed a minimum of 1/16" into the ceiling. See Figure 7.
Check the support brace to ensure it will support the full weight
of the fan and light kit.
Outlet Box
Obtain a UL-approved octagonal 4" x 1-1/2" outlet box, plus
two #8 x 1-1/2" wood screws and washers, available from any
hardware store or electrical supply house.
Orient the outlet box so that both the inner and outer holes in
the box align with the joist or support brace.
Drill pilot holes no larger than the minor diameter of the wood
screws (5/64") through the inner holes of the outlet box.
Attach the outlet box directly to the support brace or joist
with two #8 x 1-1/2" wood screws and washers. The bottom of
the outlet box must be recessed a minimum of 1/16" into the
ceiling as shown in Figure 7.
Figur
d equate ex
uree 5 - A
Ad
exii stin
ingg ffaan si
sitte
Support Brace
he cceeilin
If your existing fan site is suitable, go to the in
insst allin
llingg tth
ilingg
p l ate section and begin installing your new Hunter fan.
preparing a new fan site
To prepare the fan site follow four steps:
• Cutting the Ceiling Hole
• Installing the Support Brace (if necessary)
• Installing the Outlet Box
• Preparing the Wiring
Washer
Wood Screw
2.
1/16” Recess
Figur
nst allin
he oou
utl et bbo
ox
uree 7 - IIn
llingg tth
cutting the ceiling hole
1.
Outlet Box
Locate the site for the hole directly below the joist or support
brace that will hold the outlet box and fan.
Cut a 4" diameter hole through the drywall or plaster of the
ceiling as shown in Figure 6. You will use the hole to install the
support brace and outlet box.
preparing the wiring
1.
Ceiling Joist
Support Brace
2.
3.
4”
Diameter
Ceiling
Hole
Ceiling
4.
C AUTIO N: A
ll w
ir
in
aAll
wir
irin
ingg mu
muss t bbee in aacccord ance w
wiith n
nao de s aan
nd A
NSI/N
tio nal aan
n d llo
o c al eell e c tr i c al cco
I/NFFPA 70. IIff yyo
AN
ou
are un
ir
in
ou ssh
houl
d uuss e a qqu
ualiliff i e d eell ecunff amili
iliaar w
wiith w
wir
irin
ingg , yyo
uld
t r i ci a n .
Make sure the circuit breakers to the fan supply line leads and
associated wall switch location are turned off. If you cannot
lock the circuit breakers in the off position, securely fasten a
prominent warning device, such as a tag, to the service panel.
Thread the fan supply line through the outlet box so that the
fan supply line extends at least 6" beyond the box as shown in
Figure 8.
Attach the fan supply line to the outlet box with an approved
connector, available at any hardware store or electrical supply
house. Refer to Figure 8.
Make certain the wiring meets all national and local standards
and ANSI/NFPA 70.
Fi gur
uttin
he cceeilin
ole
uree 6 - C
Cu
ingg tth
ilingg hho
installing the support brace
If there is a ceiling joist directly above the hole which will allow the
outlet box to be recessed a minimum of 1/16" in the ceiling, go to
in
he oou
utl et bbo
ox section.
insst allin
llingg tth
If there is not an adequate ceiling joist available, do the following:
41803-01 11/14/2002
© 2002 Hunter Fan Company
5
Approved
Connector
6.
Tighten the screws into the 9/64" pilot holes; do not use lubricants on the screws. Do not overtighten.
Ceiling Joist
2 x 4 Brace
Wire Leads
Figur
he w
ir
in
uree 8 - Pr
Preep arin
ingg tth
wir
irin
ingg
installing the ceiling plate
1.
2.
3.
Drill two pilot holes into the wood support structure through
the outermost holes on the outlet box. The pilot holes should
be 9/64" in diameter.
Thread the lead wires from the outlet box through the hole in
the middle of the ceiling plate.
Your fan comes with four neoprene noise isolators. Position
the isolators between the ceiling plate and ceiling by inserting
the raised areas on each isolator into the holes in the ceiling
plate. Refer to Figure 9.
Ceiling
Ceiling Plate
You have now successfully prepared your ceiling fan site. For instructions on how to install your ceiling fan, continue with the inst allin
he cceeilin
llingg tth
ilingg p
pll ate section.
Flat Washer
Outlet Box
3” Wood Screw
Fi gur
n st allin
he cceeilin
uree 11 - IIn
llingg tth
ilingg p
pllate
assembling the fan
assembling the fan for a standard or angled ceiling
1.
2.
Isolators
3.
Insert the downrod through the canopy and canopy trim ring
as shown in Figure 12. Feed wires from the fan through the
downrod.
Screw the downrod into the fan assembly until tight. IMPORTANT! Tighten downrod set screw as shown in Figure 12.
C AUTIO N: T
he ddo
ownr
o d hhaa s a ssp
p e ci al cco
o atin
n tth
he
Th
nro
ingg oon
oatin
g; tth
he cco
oatin
thr
on
ot rreemove tth
his cco
ingg p
prre vent s
Do
no
ing;
hree ads . D
the ddo
ow nr
o d ffrrom un
nce aass s emb
on
ot
nro
unss crew in
ingg . O
On
mbll e d, ddo
no
remov e tth
he ddo
ownr
o d.
nro
he ffaan section.
ingg tth
Continue to the hang in
Hanger Ball/
Downrod Assembly
Ceiling Plate
Canopy
Figur
n s er tin
h e iiss o l ator s in
he cceeilin
uree 9 - IIn
ingg tth
intto tth
ilingg p
pllate
4.
Align the slotted holes (refer to Figure 10) in the ceiling plate
with the pilot holes in the wood support structure. Note: The
isolation pads should be flush against the ceiling.
For Angled Ceilings: Be sure to orient the ceiling plate so that
the arrows on the ceiling plate are pointing towards the ceiling
peak. Refer to Figure 10.
Canopy Trim Ring
Set Screw
Fi gur
lin
he ddo
ow nr
od
uree 12 - A
Asss emb
mblin
lingg tth
nro
Slots
Arrows for Orienting
on Angled Ceiling
Fi gur
o catin
h e ssll ot te d hho
o l es tto
o uuss e
uree 10 - LLo
ingg tth
5.
Place a flat washer on each of the two 3" screws and pass the
screws through the slotted holes in the ceiling plate as shown
in Figure 11.
© 2002 Hunter Fan Company
41803-01 11/14/2002
6
8.
assembling the fan for a low ceiling
1.
Remove the screw on the hanger ball to disassemble it from
the downrod as shown in Figure 13.
Screw on the Hanger Ball
9.
installing the blade irons
1.
2.
Hanger Ball/
Downrod
Assembly
3.
Fi gur
h e sscc rew ffrro m tth
h e hhaan ger bbaall
uree 13 - R
Reemo vin
ingg tth
2.
3.
4.
Remove the hook from the assembly.
Completely remove the set screw (identified in Figure 12) from
the fan adapter.
Put the set screw, previously removed, through the two black
neoprene washers and the hook as shown in Figure 14. Hook
must be installed in same orientation as shown in Figure 14.
Black Neoprene
Washer
Rotate the canopy until the arrow on the low profile washer
aligns with the tab hole on the canopy as shown in Figure 15.
Align the holes in the low profile washer with the holes in the
adapter and assemble securely with the three #8-32 x 1” screws.
Turn the fan upside down. Use the ceiling fan package to support the fan while assembling the blade irons.
Slide the blade iron under the switch housing plate aligning
the two notches with the two metal clips as shown in Figure
16. It may help to press down on the opposite side of the motor housing while installing.
Pull the blade iron forward over the metal clips to fully engage
the blade iron.
NOTE: If you have difficulty installing the blade iron, you can
loosen the screws and then tighten after installing.
Notch and Metal Clip
Blade Iron
Hook
Set Screw
Fi gur
lin
he sseet sscc rew ffo
or llo
ow p
uree 14 - A
Ass s emb
mblin
lingg tth
prro fililee
as s e mb
mblly
5.
6.
7.
Reassemble the set screw to the adapter as shown in Figure 14.
NOTE: The rubber washers should be tight enough to keep
the hook standing straight up, but the set screw should not be
completely tighten as to keep the hook from being able to
swing.
Place the canopy trim ring then the canopy over the adapter
as shown in Figure 15.
Place the low profile washer (lip up) into the canopy as shown
in Figure 15 fitting the notch in the low profile washer over the
adapter set screw and hook.
Tab Hole
Fi gur
lin
he bbllad e ir
on
uree 16 - A
Ass s emb
mblin
lingg tth
iro
hanging the fan
1.
Raise the fan and place the hook through the loop on the ceiling plate as shown in Figure 17. Use the note and arrow engraved in the ceiling plate to assist in determining the direction to assemble.
WAR N IN G: FFaan m
ot aasss emb
maay ffaall iiff n
no
mbll ed aass dir
diree c ted in
thes e in
insst allllaatio n in
insstruc ti ons .
Low Profile Washer
Canopy
Canopy Trim Ring
Hook
Loop
Arrow on the
Low Profile
Washer
Fi gur
lin
or llo
ow p
oun
uree 15 - A
Ass s emb
mblin
lingg ccaa no py ffo
prro f ililee m
mo
unttin
ingg
Fi gur
n gin
h e ffaan
uree 17 - Ha
Han
ingg tth
41803-01 11/14/2002
© 2002 Hunter Fan Company
7
wiring the fan
installing the canopy
1.
1.
2.
3.
Disconnect the power by turning off the circuit breakers to
the outlet box and associated wall switch location.
You can use either one or two wall switches to control the fan
and/or lights separately. Use connection 1, as described in Figure 18, to
• control the light with a wall switch and the fan with a pull
chain (one wall switch required),
• control the light with a pull chain and the fan with a wall
switch (one wall switch required), or
• control the light with one wall switch and the fan with
another (two wall switches required).
Use connection 2, as described in Figure 18, if there is no separate wall switch power wire for the light fixture.
NOTE: Wall switches not included.
Connect the wires as shown in Figure 18. To connect the wires,
twist the bare metal leads together. Place a wire nut over the
intertwined length of wire and twist clockwise until tight as.
C AUTIO N: BBee ssur
ur
o bbaare w
ir
ir
uree n
no
wir
iree oorr w
wir
iree ssttr ands aarre vviis ib
onn
maakin
ingg cco
nnee c tio ns .
ibll e aaffter m
All w
ir
in
nd llo
o c al
wir
irin
ingg mu
musst bbee in aacccord ance w
wiith n
naatio nal aan
el e c tr i c al cco
o des aan
nd A
NSI/N
ou aarre un
AN
I/NFF PA 70. IIff yyo
unff amili
iliaar
houl
d uuss e a qqu
ualiliff i e d eell e c tri ci an .
ir
in
ou ssh
w ith w
uld
wir
irin
ingg , yyo
Rotate the fan 180º clockwise from the initial position when
hanging the fan. The arrows on the hanger ball and on the
ceiling plate should be pointing in the same direction and
should be pointing towards the tab hole on the canopy. Refer
to Figure 19.
Figur
o tatin
h e ffaan
uree 19 - R
Ro
ingg tth
2.
3.
(Note: Wall
Wall Switch Wire for Separate switch must be
acceptable as a
Control of Light Fixture
general-use
Power
switch.)
Black
Wires
in
White
Ceiling
Bare or Green
For Flush Mounting: The arrows on the low profile washer and
on the ceiling plate should be pointing in the same direction
and should be pointing towards the tab hole on the canopy.
Hook the tab hole over the tab on the ceiling plate as shown in
Figure 20.
Raise the canopy, be sure the holes in the canopy and the ceiling plate are aligned, and loosely assemble the canopy screws
one at a time. When all three screws are assembled, securely
tighten all three canopy screws. Refer to Figure 20.
Tab Hole
and Tab
Canopy
Screw
2 x 4 Brace
Outlet Box
Ceiling Plate
Green Ground Wire from
Hanger Pipe (not present
with flush mounting
option)
White
Black
Approved
Connectors
Connections:
1
1. Connect Blk/Wht
2
wire from the fan to the
wall switch for separate
Blk/Wht
control of the light
3 Wires
fixture, or
from Fan 2. Connect Blk/Wht
wire from the fan to the
ceiling black wire if there
is no separate wall
switch wire for the light
fixture.
Fi gur
n st allin
he ccaan opy
uree 20 - IIn
llingg tth
installing the canopy trim ring
1.
To easily install the canopy trim ring, locate the two tabs on
the canopy trim ring. See Figure 21.
Canopy
Figur
ir
in
he ffaan
uree 18 - W
Wir
irin
ingg tth
Press Here when
Removing
Press Here when
Removing
Canopy
Trim Ring
Tab
Fi gur
in
uree 21 - C
Caan opy ttrrim rrin
ingg
© 2002 Hunter Fan Company
41803-01 11/14/2002
8
2.
3.
Take both hands and push the canopy trim ring up to the top
of the canopy. See Figure 21.
The canopy trim ring will snap and lock into place on the
canopy.
Locking Mechanism
Closed
removing the canopy trim ring
1.
2.
Locate the tab indicators, small bumps on top of tabs. Refer to
Figure 22.
To remove the canopy trim ring, press firmly on opposite sides
of the ring towards the canopy as shown in Figure 22. The tabs
will flex out releasing the trim ring from the canopy.
Tab Indicator
Canopy Trim Ring
Fi gur
nst allin
he bbllad e
uree 24 - IIn
llingg tth
installing the light fixture
Canopy
Fi gur
he ccaan o py ttrr im rrin
in
uree 22 - R
Reemo vin
ingg tth
ingg
installing the blades
1.
Open the locking mechanism as shown in Figure 23.
You can install with or without the light fixture. If you want to
he
install without the light fixture, skip to the in
insst allin
llingg w
wiithout tth
liligght ffii xtur
uree section.
WAR N IN G: Us
nl
he ssup
up
p liliee d liligght ffii xtur
or tth
his ffaan
Usee oonl
nlyy tth
upp
uree ffo
mo d el.
attaching the upper switch housing
1.
2.
Partially install two #6-32 x 3/8" housing assembly screws into
the switch housing mounting plate as shown in Figure 25.
Feed the upper plug connector through the center opening of
the upper switch housing. See Figure 25.
Locking
Mechanism
Switch Housing
Mounting Plate
Upper Switch
Housing
Figur
p en in
o n llo
o ckin
uree 23 - O
Op
ingg bbll ad e ir
iro
ingg m
mee chan ism
2.
3.
Align the holes in the blade with the blade iron as shown in
Figure 24.
Close the locking mechanism securely feeling it lock into place.
Fi gur
he up
p er ssw
wi tch hho
ou sin
o tth
he
uree 25 - A
Attt ach in
ingg tth
upp
singg tto
moun
unttin
ingg p
pllate
3.
4.
41803-01 11/14/2002
Housing
Assembly
Screw
Upper Plug
Connector
Align the keyhole slots in the upper switch housing with the
housing assembly screws installed previously.
Turn the upper switch housing counterclockwise until the
housing assembly screws are firmly situated in the narrow end
of the keyhole slots as shown in Figure 26. Install the one remaining #6-32 x 3/8" housing assembly screw into the third
hole in the upper switch housing. Tighten all three screws firmly.
© 2002 Hunter Fan Company
9
6.
7.
Thread the fan pull chain and light pull chain through the appropriate holes.
Thread the light pull chain through the finial and screw the
finial onto the threaded rod end until tight.
Lower Switch
Housing
Fan Pull Chain
Fi gur
o un
he up
p er ssw
w itch hho
ou sin
uree 26 - M
Mo
unttin
ingg tth
upp
singg
C AUTIO N: M
ur
he up
p er ssw
w i tch hho
ousin
eMaake ssur
uree tth
upp
singg iiss sseo tth
he ssw
w itch hho
ousin
oun
cur
singg m
mo
unttin
ingg p
pllate . FFaailureely aattt ached tto
ur
op
nd ttii ghten aall
ll tthr
hr
ousin
uree tto
prro p er ly aattt ach aan
hreee hho
singg aass s emb
oul
d rree sul
he ssw
w itch hho
ousin
n d liligght
mblly ssccrews cco
uld
ultt in tth
singg aan
f i xtur
uree ffaallin
llingg .
Glass Bowl
Threaded Rod
Metal Disk
Light Pull Chain
attaching the lower switch housing
1.
Connect the upper plug connector from the motor to the lower
plug connector in the lower switch housing assembly. See Figure 27.
NOTE: Both plug connectors are polarized and will only fit together one way. Make sure that both connectors are properly
aligned before connecting them together. Incorrect connection could cause improper operation and damage to the product.
Cover Plate
Finial
Fi gur
ns ta llin
he ggll as s bbo
owl
uree 28 - IIn
llingg tth
Upper Switch
Housing
Lower Plug
Connector
Housing
Assembly
Screw
Upper Plug
Connector
Lower
Switch
Housing
Fi gur
onn
he p
lu
onn
uree 27 - C
Co
nneec tin
ingg tth
plu
lugg cco
nneec to r s
2.
Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower
switch housings. Attach the lower switch housing to the upper switch housing with three #6-32 x 3/8" housing assembly
screws. See Figure 27.
installing without the light fixture
Your Hunter fan comes with an integrated light fixture assembly
and an optional switch housing cap and finial. This feature gives
you the option of installing the fan with or without the included
light fixture.
If you decide to install the fan without the integrated light fixture
please complete the following instructions to install the optional
switch housing cap and finial.
attaching the upper switch housing
1.
2.
3.
installing the glass bowl
Refer to Figure 28.
1. Install two max 60 Watt medium base incandescent bulbs.
2. Attach the extra pull chain (included in the sack parts) to the
fan pull chain using the plastic breakaway connector.
3. Thread the fan pull chain through the hole in the metal disk.
Then, thread the fan pull chain through the small hole beside
the hole in the center of the glass bowl.
4. Thread the light pull chain through the hole in the center of
the glass bowl.
5. Place the cover plate up against the glass bowl. Align the holes
in the cover plate and glass bowl.
© 2002 Hunter Fan Company
4.
Partially install two #6-32 x 3/8" housing assembly screws into
the switch housing mounting plate as shown in Figure 25.
Feed the upper plug connector through the center opening of
the upper switch housing. See Figure 25.
Align the keyhole slots in the upper switch housing with the
housing assembly screws installed previously.
Turn the upper switch housing counterclockwise until the
housing assembly screws are firmly situated in the narrow end
of the keyhole slots as shown in Figure 26. Install the one remaining #6-32 x 3/8" housing assembly screw into the third
hole in the upper switch housing. Tighten all three screws firmly.
C AUTIO N: M
ur
he up
p er ssw
w i tch hho
ousin
eMaake ssur
uree tth
upp
singg iiss sseo
t
h
e
s
w
i
t
c
h
h
o
u
sin
g
m
o
un
t
in
g
p
l
a
t
e
.
F
a
ilcur
e
l
y
a
t
t
a
c
h
e
d
t
to th sw
ho sing mounting pl
Fa
ure at
ur
op
nd ttii ghten aall
ll tthr
hr
ousin
uree tto
prro p er ly aattt ach aan
hreee hho
singg aass s emb
oul
d rree sul
he ssw
witch hho
ousin
n d liligght
mblly ssccrews cco
uld
ultt in tth
singg aan
f i xtur
e
f
a
llin
g
.
ure falling
41803-01 11/14/2002
10
attaching the lower switch housing
installing the lower switch housing
1.
uninstalling the light fixture
Refer to Figure 29.
1. Disconnect the plug connectors between the black wire and
the black/white wire.
2. Disconnect the plug connectors between the two white wires.
3. Uninstall the nut and washer from the end of the light fixture
inside of the lower switch housing.
4. Unscrew the threaded rod of the light fixture from the lower
switch housing.
5. Remove the light fixture from the lower switch housing pulling disconnected wires through the hole in the center of the
lower switch housing.
NOTE: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole.
6. Install the dummy terminals (included in the sack parts) on
the two disconnected wires in the lower switch housing.
2.
Connect the upper plug connector from the motor to the lower
plug connector in the lower switch housing assembly. See Figure 27.
NOTE: Both plug connectors are polarized and will only fit together one way. Make sure that both connectors are properly
aligned before connecting them together. Incorrect connection could cause improper operation and damage to the product.
Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower
switch housings. Attach the lower switch housing to the upper switch housing with three #6-32 x 3/8" housing assembly
screws. See Figure 27.
Lower Switch
Housing
Threaded Rod
Fi gur
h e liligght ffii xtur
uree 29 - R
Reemo vin
ingg tth
uree
installing the switch housing cap and plug button
Install the switch housing cap and plug button to the lower switch
housing as shown in Figure 30.
Lower Switch
Housing
Cap
Plug Button
Fi gur
n st allin
he ssw
witch hho
o u sin
nd p
lu
uree 30 - IIn
llingg tth
singg ccaap aan
plu
lugg
b u t to n
41803-01 11/14/2002
© 2002 Hunter Fan Company
11
operating your ceiling fan
cleaning your ceiling fan
1.
2.
caring for finishes
3.
4.
Turn on electrical power to the fan.
The fan pull chain controls power to the fan. The pull chain
has four settings in sequence: High, Medium, Low and Off.
• Pull the chain slowly to change settings.
• Release slowly to prevent the chain from recoiling into the
blades.
• The chain uses a breakaway connector that separates if
the chain is jerked. If this happens, simply reinsert the chain
into the connector.
The light pull chain controls power to the light. The pull chain
has two settings: On and Off.
Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a
direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at
the ceiling around the room without causing a draft. Refer to
Figure 31.
Fi gur
ir ffll o w p
uree 31 - A
Air
paatter ns
To change the direction of air flow, turn the fan off and let it
come to a complete stop. Slide the reversing switch on the fan
to the opposite position as shown in Figure 32. Restart fan.
Fan Pull
Chain
Reversing
Switch
Fi gur
ull cch
hain aan
n d rreev ersin
w i tc h
uree 32 - PPull
singg ssw
For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the finish. A vacuum cleaner brush nozzle can remove heavier dust. Surface smudges or an accumulation of dirt
and dust can easily be removed by using a mild detergent and a
slightly dampened cloth. An artistic agent may be used, but never
use abrasive cleaning agents as they will damage the finish.
caring for blades
Wood finish blades should be cleaned with a furniture polishing
cloth. Occasionally, a light coat of furniture polish may be applied
for added protection and beauty. Painted and high-gloss blades
may be cleaned in the same manner as the fan finish.
troubleshooting
Problem: Nothing happens; fan does not move.
1. Turn power on, replace fuse, or reset breaker.
2. Loosen canopy, check all connections according to the
wir
in
he ffaan section.
irin
ingg tth
3. Check the plug connection in the switch housing.
4. Push motor reversing switch firmly up or down to ensure
that the switch is engaged.
5. Pull the pull chain to ensure it is on.
6. Remove the shipping bumpers.
Problem: Noisy operation.
1. Check to see if the blade bracket is secure.
2. Check to see if the blade is secure.
3. Check to see if the blade is cracked. If so, replace all the
blades.
4. Change to an approved speed control.
5. Be sure that the glass is secure.
6. Check and tighten the screws in the switch housing
mounting plate and in the upper and lower switch housing.
Problem: Excessive wobbling.
1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan.
2. Turn power off, support fan very carefully, and check that
the hanger ball is properly seated.
If you need parts or service assistance, please call 888-830-1326 or
visit us at our WEB site at http://www.hunterfan.com.
Hunter Fan Company
2500 Frisco Avenue
Memphis, Tennessee 38114
© 2002 Hunter Fan Company
41803-01 11/14/2002