Rotation · position sensors
Model ELV-24Y36A-K (digital potentiometers)
http://www.sensatec.co.jp
□Model list
Detection angle range
360°
ELV-24Y36A-K
Application
- Controller of the game machine
- Foot switch for industrial sewing machine
- Handle potentiometer for joysticks
- Handle potentiometer for pachinko machines
Characteristics
- Uses an electromagnetic sensor and a magnet to eliminate contacts, thus avoiding poor contact problems
and increasing the lifespan.
- High precision with a linearity of 1.0% of FS or less.
- The ELV-24Y is equipped with an electromagnetically shielded cover that makes it resistant to external magnetism.
- 360° (endless) analog linear voltage output.
Rating and performance
Model name
Electrical effective
angle
ELV-24Y36A-K
360°
Power supply voltage
5 V DC ±10 %
Power consumption
DC 25 mA or less
Output voltage
DC 0.02 V to 4.95 V ±1% FS
Linearity
±1% FS or less
Load resistance
100 kΩ or more
Lifespan
Mechanical rotation
angle
Rotation torque
10 million rotations or more (with 20 rotation/min continuously or less at normal temperature,
no load, and within the electrical effective angle range)
360 ° (Endless)
1.0 N·cm (0.10 kgf·cm) or less
Shaft strength
(compressive)
Shaft strength
(tensile)
Operating temperature
range
Operating humidity
range
35 to 85% RH or less (35 to 85% RH or less during storage) (no condensation)
Withstand voltage
1 min at AC 500 V 50/60 Hz (between the live part and installation part)
9.8 N (1 kgf) or more
9.8 N (1 kgf) or more
-10 to 60 °C (-15 to 65 °C during storage) (no condensation)
Insulation resistance 100 MΩ or more measured with an ohmmeter at DC 500 V (between the live part and installation part)
Vibration resistance Durability: 2 hours in each X, Y, Z direction at 10 to 55 Hz and with peak-to-peak amplitude of 1.5 mm (at power off)
Shock resistance
Durability: 3 times at 500 m/s2 (approx. 50 G) in each X, Y, Z direction (at power off)
Protection rating
IP50
Case material
Connector
Weight
Accessories
Options
(sold separately)
Case: PBT, cover: SPCB or SPCE, shaft: POM
Connector: S3B-ZR-SM2-TF (3-pin), housing: ZHR-3, contact: SZH-002T-P0.5 (from J.S.T. Mfg. Co., Ltd.)
Approx. 13 g
1 nut, 1 flat washer, 1 waved washer
Connector harness : SZH-3-300
ELV-24Y36A-K 1/2
Head Office – laboratory – Kyoto Factory:
3-27-12 Oichonamikawa Kameoka-shi Kyoto-fu 621-0013,JAPAN
E-mail : info@sensatec.co.jp
http://www.sensatec.co.jp
External dimensions diagram
1±0.2
ø2.8±0.1
9±0.2
1
2
3
ø24±0.5
＋ＯＵＴ－
ＥＬＶ-２４
0
6 -0.1
M10 P1.0
8.5
14
Connector,B3B-ZR
10
4.5
10
Pin number Signal name
1
GND
2
OUT
3
V cc
0
-0.15
Position at 0°
Output circuit
3 Vcc
Magnetism
detection circuit
2 OUT
AMP
1 GND
Output voltage variation characteristics (typical example)
0.2°or less
Output voltage [V]
5.0
4.0
3.0
2.0
1.0
0
-210 -180 -150 -120
-90
-60
-30
0
30
60
90
120
150
180
210
CW
Rotation angle[°]
Accessories
Flat washer
Waved washer
14
16
15
t=2
t = 0.8
t = 0.25
16
Nut
*See Rotation position sensors (digital potentiometers) general usage precautions for the usage precautions.
*For a detailed specification of the other, please refer to specifications.
ST-RK051B
ELV-24Y36A-K 2/2