JOB NAME: TYPE NO.: CATALOG NO.: HR Series Explosion Proof Emergency Lighting Fixtures ELVA12 Directional Lighting Head Description Hazardous location lighting fixtures designed for use in conjunction with 700 Series emergency units or as stand alone fixtures in extreme environments. HR Series fixtures may be connected to or operated remotely from 700 Series emergency units. HR Series fixtures may also be remotely powered from AC or DC power sources located outside the hazardous location. HR Series fixtures are suitable for use in NEC Class I, Division 1, Groups C&D, Zones 0, 1 & 2, Groups IIA, IIB+H2 & IIC; Class I, Division 2, Groups C&D, Zone 2, Groups IIA, IIB+H2 & IIC; Class II, Division 1, Groups EF&G; Class II, Division 2, Groups F&G and Class III hazardous locations. Construction Housing: Heavy duty, copper-free cast aluminum housing designed and constructed to withstand the pressure of explosions caused by an internal arc without propagating them into the hazardous atmosphere. Housings have a corrosion resistant, epoxy powder coat finish. All HR Series fixtures include a high impact, heat resistant globe with a cast aluminum globe guard and stainless steel hardware. Installation Wiring: Ceiling and wall mount fixtures provide a universal junction box with four threaded openings for the attachment of 3/4” rigid conduit. Three close-up plugs are provided. Pendant mount fixtures provide a threaded 3/4” top hub. Maximum ambient temperature limit is 320ºF (160ºC). Illumination Available with low voltage halogen lamps and 7-watt compact fluorescent lamps if emergency power is provided by a model 714 unit. HR Series fixtures are compatible with medium base incandescent or 13 watt compact fluorescent lamps for non-emergency lighting applications. Description Heavy duty, copper free cast aluminum construction with a corrosion resistant, epoxy powder coat finish. Head assembly is fully adjustable. EVLA12 heads meet NEC Class I, Division 1 & 2, Groups B+, C & D; Class II, Division 1, Groups E, F & G; Class III; NEMA 3, 3R & 12 hazardous location requirements. Installation Wiring: Designed for direct or remote attachment to 750 Series emergency units or operation remotely from a 12VDC emergency source located in a non-hazardous area. Maximum ambient temperature limit is 131ºF (55ºC). Illumination Supplied with 12V, 12W MR16 Halogen lamp. HRC Series (Ceiling) HRW Series (Wall) HRP Series (Pendant) Catalog Numbers: ELVA12 - 12V, 12W Head ELVA12GB - 12V, 12W Head Group B Operation DIMENSIONS EVLA12 Directional Head 9” 45/8” 11.7cm 22.9cm 9” 22.9cm ORDERING INFORMATION HR Wall Mount 111/8” HR Ceiling Mount 26.1cm Catalog Number: Example: HRW120P13 HR SERIES 143/8” 143/8” MOUNTING C - Ceiling W - Wall P - Pendant EXK Exit Kit HR-Series Fixture shown with EXK 3-face exit kit installed. To order, add EXK suffix to model number. Ex.: HRCTHF12EXK INPUT VOLTAGE Incandescent Blank - 120VAC Fluorescent 120 - 120VAC 277 - 277VAC AC-Only Use(1) HF - 150W-A19 Incandescent P13 - 13W CFL P26 - Two 13W CFL Emergency Use (2) HF7 - 6V, 7W Hal. HF10 - 6V, 10W Hal. HF12 - 6V, 12W Hal. THF12 - 12V, 12W Hal. HFP7- 7W CFL (3) (1)Lamps not provided with fixture. (2)Lamps provided with fixture. (3)For use with 714 emergency unit only. Maximum mounting distance from 714 unit is 8 feet Specifications are subject to change without notice. Consult website for latest version of this spec sheet. Crescent/Stonco • 200 Franklin Square Drive • Somerset, NJ 08873 • 800-334-2212 • www.crescentlighting.com Crescent is a Philips company 36.2cm 36.2cm LAMP ID 73/8” 18.5cm 73/8” 18.5cm EXK Exit Kit HR Pendant Mount 147/8” 38.8cm 73/8” 18.5cm 173/4” 45.2cm 12” 30.5cm NOTE: Dimensions and specifications subject to change without notice. Form 1274A 04/12 © 2006 Philips group