XPB Explosion-Proof Emergency Unit FEATURES EMERGENCY LIGHTING • • • • • • • ‘Normally off’ emergency unit for explosion proof applications White, high strength, copper-free aluminum housing in 6 or 12 volt models Accommodates up to three emergency lighting units Quick access thread-on cover contains arc generated explosions Maintenance-free lead-acid battery with fully automatic charger Temperature range: 20°C to 30°C (68°F to 86°F) UL 924 and 844 Listed for NEC C1D1 Groups C and D ORDERING ORDERING INFORMATION INFORMATION MODEL XPB 12XPB CAPACITY 75P 75 Watts OPTIONS TDR120 15 minute retransfer delay, 120VAC SPECIFICATIONS ELECTRONICS • ELECTRICAL BASE CATALOG NUMBER OUTPUT WATTS OUTPUT VOLTS 1.5 2 3 4 HOURS HOURS HOURS HOURS STANDARD LAMP REMOTE CAPABILITY XPB-75P 6 75 57 42 28 (*) Yes 12XPB-75P 12 75 57 42 28 (*) Yes • • • Extended remote capacity and optional time delay retransfer (TDR) 120/277 60Hz VAC operation, test switch and LED AC-on indicator light Transformer isolation, surge, transient and low voltage disconnect protection Reverse polarity, short circuit and AC lockout protection (*) Unit is supplied without lighting fixtures. Unit must operate at least one lighting fixture (unit mounted or remote) to meet UL Standard 924 requirements. See following page for explosion-proof lighting fixtures and accessories. 10¾” (27.3 cm) 12" (30.5 cm) 948 63⁄16" (15.7 cm) 14½" (36.8 cm) Depth = 8" (20.3 cm) 3" (7.6 cm) Depth = 59⁄16" (14.1 cm) EX Explosion-Proof Emergency Luminaires FEATURES • • • • • • Emergency luminaire for direct mounting to XPB Unit in explosion proof applications Medium-Gray, epoxy-clad, copper-free aluminum housing in 6 or 12 volt models Impact resistant, prismatic glass globes with incandescent lamps Supplied with all fittings required for XPB unit mounting Temperature code: T5 (100°C) for 40°C ambient in C1D1 Groups C,D Suitable for use in wet locations UL 924 and 844 Listed for NEC C1D1 Groups C and D EMERGENCY LIGHTING • ORDERING INFORMATION EX-1CD MODEL EX-1CD OUTPUT VOLTAGE 6 6 Volt 12 12 Volt LAMP OPTIONS 18 18 Watts 28 28 Watts MATCHING REMOTE FIXTURES MODEL MOUNTING REX1CD P Pendant Mount C Ceiling Mount OUTPUT VOLTAGE 6 6 Volt 12 12 Volt WATTS 18 18 Watts 28 28 Watts W Wall Mount A Angled Mount REX1CDP REX1CDC REX1CDW REX1CDA Shown with optional XWG Globe Guard LUMINAIRE ACCESSORIES MODEL DESCRIPTION XWG Aluminum (copper-free) globe guard. Protects fixture lens from accidental impact damage. Twocoat, baked epoxy, medium-gray enamel finish. EX100CD Auxiliary housing with “EXIT” legend for “normally off” operation only. Housing constructed of 18-gauge sheet metal; medium-gray enamel finish. Glass face with 6" high, ¾" stroke red letters on white background. (Lighting fixture not included). REX-SDR Standard dome reflector. Steel, with white porcelain enamel finish. 12½" 11½" 13" 7" REX-AR Angled (30°) reflector. Steel, with white porcelain enamel finish. 949