TJLED
LED TEMPORARY LIGHTING
Comparable to 400W PSMH
13,200 Lumens • 129W
temp light
The TJLED temporary lighting fixture
is the perfect choice for temporary
lighting on new and existing
construction sites.
Whether you are a general contractor
or an electrical contractor looking for
a performance-based, energy saving
temporary lighting solution, the TJLED
Temp Light is the solution you are
looking for.
Drawing only 129 watts, you can
achieve up to 73% energy savings over
traditional pulse start metal halide.
The TJLED provides superior energy
efficiency and a longer, maintenancefree operating life over 50,000
hours (L70).
Using 13,200 lumens, the TJLED
delivers the light where you need it
and when you need it, while providing
safety and security to any jobsite.
ENERGY EFFICIENCY
With a 73% reduction in
energy usage vs. 400W
PSMH temp light, you can
save on expensive costs
associated with operating
older, inefficient HID
temporary lighting.
w w w. s i m k a r. c o m
LONG-TERM RELIABILITY
AND OPERATION
Up to a 50,000 hour
operating life (L70) lets
you use the TJLED Temp
Light over and over without
having to change out
HID lamps.
SUPERIOR PERFORMANCE
The TJLED Temp Light
offers a familiar form with
exceptional performance.
Use in place of a traditional
400W PSMH temp light to
achieve high lumen outputs
and efficiently light your
work space.
CONTRACTORS CHOICE
The TJLED is easy to handle,
installs quickly, and is the
perfect choice for new
construction or remodeling
older facilities. The TJLED
can be energized quickly via
the supplied cord & plug, or
hardwired to existing
power runs.
LED TEMPORARY LIGHTING
• “Instant-on” means no warm up time after
power disruptions
• 73% Energy Savings over traditional 400W PSMH
• Only 129 watts delivering 13,200 lumens
• Longer lasting light; up to 50,000 hour (L70)
operating life
• Heavy gauge vented die-cast aluminum housing
for greater thermal heat dissipation
• >70CRI, 5000K color temperature
• 120V operation when used with supplied cord/
plug
• Can be hardwired
• Spring-loaded steel latch for safety
• Convenient handle for easy handling and quick
installation
• C-UL-US damp location listed
• 5-year limited warranty
HOUSING Conical die cast aluminum housing featuring high gloss, baked white enamel
finish over rust inhibiting phosphate powder coat finish.
with output current of 3.15 amps. 5’ #16 gauge SJTW cord with 5-15P 120V plug (standard).
Remove plug for direct wire or 277V operation.
OPTICS Six clear polycarbonate side panels along with two clear polycarbonate bottom
panels enclose LEDs for protection from elements. Optics provide for a 270˚ distribution
and are protected by nickel plated wire guard.
MOUNTING Integral steel, spring loaded safety latch (standard)
LEDs 168 high performance LED chips rated at 129W, 13,200 lumens (delivered), 107
lm/W, 5000K CCT, >70CRI, 24 LEDs each on six side panels and 12 LEDs on bottom
panels. LEDs are LM-80 tested. LED operating life is 50,000 hours (L70).
LISTINGS C-UL-US listed for damp locations.
FIXTURE WEIGHT 19 lbs.
WARRANTY 5 year limited warranty.
ELECTRICAL Steel power supply compartment is thermally isolated from LED light
engines via airflow chamber. Universal 120-277V operation, 0-10V dimming (standard),
TJLED Temporary Lighting
SERIES
TJLED
WATTAGE
129 = 129W
COLOR TEMPERATURE
50 = 5000˚K
VOLTAGE
U1 = 120-277V
*Nominal. See performance tables for actual input power.
*Fixture is 120V operation with cord/plug. Remove cord/plug for 277V operation.
Dimensions
10 1/4"
10 1/4"
12 5/8"
8 1/4"
Performance Data
Model
Input Power
Efficacy (lm/W)
Light Output*
Mounting Ht.
Equivalent HID
Operating Temperature
TJLED12950U1
123W
107
13,150 lm
Up to 25’
Up to 400W PSMH
-31˚F (-35˚C) to 104˚F (40˚C)
* Delivered lumens
RoHS
LED
COMPLIANT
FLUORESCENT
HID
CFL
INDUCTION
LED
Simkar • 700 Ramona Avenue • Philadelphia, Pennsylvania • 19120 • 800 523-3602 • www.simkar.com
TJLED101615