BLACKLIGHTS
X-RAY
LED
LAMPS
FILM VIEWING EQUIPMENT
UV-A Light Sources
Blue Light Sources
Tritan TRI-450 Multi-LED,
Broad-Beam Blue Light Lamp
Tritan TRI-365 Multi-LED, Broad-Beam UV-A Inspection Lamp
The TRI-365 features three cool-running, ultra-high flux UV-A LEDs for
inspection, plus a convenient white light LED to illuminate dark work
areas. This lamp’s broad-beam configuration provides a wider coverage area than conventional UV-A inspection lamps, while its compact
head design allows access into areas inaccessible to larger lamps.
Product Features:
• Nominal steady-state UV-A intensity of 9,000 μW/cm² at 15"
• 30,000-hour LED service life
• Rugged, ergonomic, angled lamp body provides safe, fatigue-free
use
• Meets ASTM UV-A intensity specifications for FPI and MPI
This lamp features three cool-running,
ultra-high flux 450 nm blue light LEDs with a
broad-beam configuration. This powerful lamp
provides a wider coverage area than conventional
inspection lamps, while its compact head design allows
access into areas inaccessible to larger inspection lamps.
Product Features:
• Nominal steady-state blue light intensity of 5,000 μW/cm² at 15"
• 50,000-hour LED service life
• Rugged, ergonomic, angled lamp body provides safe, fatigue-free
handling
Optimax 450 Rechargeable Blue Light LED Flashlight
This versatile, cordless inspection lamp features a high-intensity, 450
nm blue light LED, a black anodized lamp body and our patented, thinfilm dichroic lens to filter out long-wave visible light.
Optimax 365 UV-A LED Inspection Flashlight
Powerful, rechargeable, high-intensity UV-A inspection flashlight featuring state-of-the-art, ultra-hi-flux LED technology!
Product Features:
• Nominal steady-state UV-A intensity of 18,000 μW/cm2 at 15"
• 30,000-hour LED service life
• Ergonomic, portable and rugged. Anodized aluminum lamp body
minimizes corrosion and stands up to years of heavy use.
• Meets ASTM UV-A intensity specifications for FPI and MPI
Vibrance EV5000® UV LED
Black Light
The Vibrance EV5000® UV LED Black
Light may not only be the best UV LED
black light you ever buy, but the last as
well. Also including a limited lifetime warranty
that provides original purchasers with a free
loaner light during any warranty repairs.
Product Features:
• Certified for wavelength of 365 - 370n
• Up to 50,000-hour LED service life
• Lightweight Ergonomic Design
30
Quality Equipment Distributors, Inc.
Product Features:
• Nominal steady-state blue light intensity of 7,000 μW/cm2 at 15"
• 50,000-hour LED service life
• Portable and rugged. Anodized aluminum lamp body minimizes
corrosion and stands up to years of heavy use
Model FL5000 Dual Mode
Inspection Light
The BlueLine Model FL5000 is a revolutionary
new flashlight for fluorescent NDT inspection.
It works with existing fluorescent particles
and penetrants and does the job that you
are used to doing with high powered
UV lights, but does it with much
more convenience and safety. The
intense blue light excites the
fluorescence of the materials, and the BlueLine filter glasses completely block the reflected blue so that you see your fluorescent indications with maximum contrast.
Product Features:
• Nominal steady-state blue light intensity of 3,500 μW/cm2 at 15"
• 10,000-hour LED service life
• Lightweight, cordless, ergonomic design eliminates fatigue
• Lifetime warranty
BLACKLIGHTS
ULTRAVIOLET LAMPS
High Intensity Lamps
FC-100 Series
High-Intensity UV Lamps
The Spectroline FC-100 series
(FC-100, FC-150 & FC-100M) lamps
include a built-in fan to ensure cool
operation. These light weight, safe and convenient UV lamps are ergonomically designed for extended hand held use. The lamp head
can also be rotated 360 degrees when mounted on a transformer
base. An 8 foot cord extends from the lamp handle to the ballast, and
another 8 foot cord runs from the ballast to the power source.
Product Features:
• FC-100 - Nominal steady-state UV-A intensity of 4,800 μW/cm² at
15”
• FC-150 with Built-In-Ballast- Nominal steady-state UV-A intensity of
4,500 μW/cm² at 15"
• FC-100M – Is a direct replacement lamp for use with Magnaflux
equipment
• 5,000-hour average rated bulb life
• Easily meets ASTM UV-A intensity specifications for FPI and MPI
ZB-100F Fan-Cooled
Ultraviolet Black Light
The Magnaflux ZB-100F Portable
Black Light System produces long wave
ultraviolet light at 365 nanometers. A built-in, quiet operating fan located at
the rear of the ZB-100F lamp housing dramatically reduces operating
temperatures to under 85°F, for improved operator safety and comfort
while simultaneously expanding bulb life.
Product Features:
• Cool running for increased safety and comfort
• Extended bulb life for greater operating efficiency
• Polycarbonate bezel shields operator’s hands from lens
• Cord-through-handle design reduces operator fatigue
• Rugged aluminum housing and reinforced fiberglass handle
• Recessed lens for bulb protection
BIB-150P Built-In-Ballast
UV Lamp
The unique Built-In-Ballast 150-watt
bulb eliminates the need for a heavy,
external transformer. This lamp is a favorite
with NDT inspectors because it provides
super-high UV-A intensity at an
economical price. Also, the light weight
and ergonomic design ensures easy handling for long inspections.
Available in either concentrated spot or broad-beam versions. Both
models come standard with an 8 foot (2.4 m) power cord. Product Features:
• Concentrated spot configuration has a nominal steady-state UV-A
intensity of 4,500 μW/cm2 at 15"
• Broad-beam configuration has a nominal steady-state UV-A intensity of 3,000 μW/cm2 at 15"
• Space-age engineering polymer housing is impact-resistant and
dent-proof
• Vinyl-coated, stainless-steel, wraparound caging protects against
burns and acts as a lamp stand
• Easily meets ASTM UV-A intensity specifications for FPI and MPI
ZB-150F-SB Ultraviolet Self Ballasted Black Light
The Magnaflux ZB-150F-SB Portable Self-Ballasted Black Light offers the same outstanding performance as the popular ZB-100F FanCooled Black Light but is self-ballasted. Meaning no transformer to
pull along as you perform inspections.
Product Features:
• Cool running for increased safety and comfort
• Polycarbonate bezel shields operator’s hands from lens
• Cord-through-handle design reduces operator fatigue
• Rugged aluminum housing and reinforced fiberglass handle
• Recessed lens for bulb protection
ORDER NOW 1-855-2BUY-NDT
31
BLACKLIGHTS
X-RAY FILM VIEWING
ULTRAVIOLET
LAMPS EQUIPMENT
Stationary Lamps
UV-400 Series Superflood
These super-powerful and versatile lamps have
been specially engineered for fluorescent penetrant and magnetic particle inspection, parts
degreasing inspections and wash station inspections.
Product Features:
• Powerful, 400-watt metal halide bulb, combined
with tempered, heat-resistant low solarization
UV filters provide the highest intensity over the
largest area
• Easily mounts over automated magnetic particle systems or above penetrant inspection
booths for the most accurate inspections of even the largest parts
• Unique twin-filter system eliminates hazardous UV-B and UV-C radiation escaping from
lamp
• Compact design and built-in mounting features allow lamps to be positioned anywhere –
even in previously inaccessible areas
UV-400A
The UV-400A features a concentrated-beam
reflector designed to assure the highest concentrated UV-A intensity available. It has a
nominal steady-state UV-A intensity of 8,000
μW/cm² at lamp center, measured at 15". Irradiates an area as large as 16” x 10”, producing a nominal steady-state UV-A irradiance
of not less than 2,000 μW/cm².
UV-400B
The UV-400B features a unique broad-beam
reflector designed to provide NDT inspectors with maximum uniformity of coverage over the largest area. It has a nominal
steady-state UV-A intensity of 4,000 μW/cm²
at lamp center, measured at 15". The lamp
irradiates an area as wide as 20" x 12" with
unmatched uniformity, producing a nominal
steady-state UV-A irradiance of not less than
2,000 μW/cm².
Replacement Parts
& Accessories
Bulbs
100S
Spot Bulb, Ad-Medium Base, 100 Watt
for SB-100P and FC-Series Lamps.
100S/M & 507320
Spot Bulb, Medium Base, 100 Watt for
Spectroline (SB-100P and FC-Series
Lamps) and Magnaflux (ZB-100F and
ZB-100F-MB) black lights. BLE-150CS-115/M
Bench and Display UV Lamps
Concentrated Spot Bulb, Self-Ballasted, 150 Watt for BIB-150P Series Lamps
(115 Volt Version).
BLE-150BS-115/M
Broad-Beam Bulb, Self-Ballasted, 150
Watt for BIB-150P Series Lamps (115
Volt Version).
BLE-150FC-115/M
X-series lamps are ideally suited for applications where high-intensity, wide-area UV coverage is required. Constructed of rugged metal with sturdy mounting brackets, these units are
available in various combinations of long, medium and/or short wave UV. The complete line
also offers lamps in a wide choice of various intensities, sizes and-wattage, including single or
double UV tubes. A corrosion-resistant aluminum reflector optimizes UV irradiance while all
short and medium wave models feature our unique LONGLIFE filter glass to ensure high initial
UV intensity. These versatile lamps are also a key component of our CL-150 UV photodocumentation system. They offer easy wavelength interchangeability making this system ideal for
numerous applications requiring a darkened environment.
32
Quality Equipment Distributors, Inc.
Concentrated Spot Bulb, Self-Ballasted, 150 Watt for FC-150 Lamp (115 Volt
Version).
BLE-400
Metal Halide Bulb, 400 Watt for SuperFlood UV-400 Series Lamps
519296
Spot Bulb, Self-Ballasted, 150 Watt for
Magnaflux ZB-150 FSB black light.
BLACKLIGHTS
REPLACEMENT PARTS & ACCESSORIES
Black Light Filters
QED offers a variety of
smooth and diffused
output fluted filters for
use with various inspection
lamps for both Spectroline
and Magnaflux models.
Mounting Hardware Assemblies
Magnaflux Black Light
Ceiling Mount Assembly
The Magnaflux Ceiling Mount Assembly comes
with hardware to permanently attach handheld black lights, such as ZB-100F, ZB-100F-MB
and ZB-150F SB to the solid roof of an inspection area.
Magnaflux Black Light
Flat Surface Mount Assembly
The Magnaflux Flat surface mount assembly with adjustable angle for affixing hand held black lights such as
ZB-100F, ZB-100F-MB and ZB-150F SB to any flat surface.
Magnaflux Wet Bench
Mounting System
The Magnaflux Wet bench mounting
system for hand - held black light
units such as ZB-100F, ZB-100F MB
and ZB-150F SB. Includes mounting
hardware for permanently affixing
black lights to Magnaflux wet bench units. Once installed, black lights
can be continuously adjusted to fit varying inspection needs.
Digital Radiometers
AccuMAX XRP-3000
The AccuMAX XRP-3000 radiometer/photometer uses a dual wavelength UV-A/VIS sensor detector
to measure both ultraviolet and
visible light. Featuring automatic
zeroing, integration and signal
hold, the unit provides accurate
readouts for UV, visible irradiance
or radiance. The LCD readout
features ±0.2% linearity with the
sensor sending the linearity correction data to the readout unit
during initial power up. To ensure consistent results, sensors are
designed with superior bandpass filters while optical stacks are assembled in Class 100 clean workstations. For precise spectral coverage, high-quality interference filters are used to resist degradation.
Product Features:
• Microprocessor-controlled readout unit with dual-wavelength sensor detector
• Superior bandpass interference filter
• Choice of direct or USB connection between sensor detector and
readout unit
• Excellent cosine response
• User-defined power save and automatic shutoff
• Large, easy-to-read LCD screen
• Sealed sensor housing and USB connection with water-resistant
adapter
Magnaflux Black Light
Meter
Calibrated and certified specifically
for NDT use, the Digital Black Light
Meter supplies an accurate digital
readout of the black light intensity
(microwatts/cm2) and includes a
permanently affixed black light sensor, battery and carrying case.
Magnaflux White Light Meter
The Magnaflux White Light Meter accurately
measures visible light by foot candles
and lux, and includes white light
meter and a permanently affixed white
light sensor, battery and carrying case.
ORDER NOW 1-855-2BUY-NDT
33