7
SECTION
MISCELLANEOUS
Description
Telephone Cabinets
Conduit Enclosing Shield (Panel Skirts)
Breaker Mechanical Lugs
Compression Lugs
Optional Mechanical Lugs
Aluminum Body Lugs for Copper or Aluminum Wire
Miscellaneous Replacement Parts
Page
7-2
7-2
7-2
7-2
7-3
7-3
7-4
Obsolete Panel and Breaker Mounting Kits
Strap Kits
Connecting Strap Kits
Blank Plates – Vacu-Break
Molded Case Switches
7-4
7-4
7-4
7-4
7-4
Miscellaneous
Telephone Cabinets
Conform to requirements of Underwriter’s
Laboratories, Inc., for all cabinets and boxes
bearing their label. Surface enclosures,
box and front constructed of code gauge
steel. Entire cabinet finished with light
gray, ANSI-61. Flush enclosures, box constructed of code-gauge galvanized steel,
front only finished with light gray, ANSI-61.
and vault handle supplied with double
doors; two spring catches supplied on
doors more than 48 in. (1219 mm) high.
Backboard
0.75 in. (19mm) plywood backboard
supplied when specified.
Table Misc.-1
Door
Box Width – In. (mm)
0 (0)–20 (508)
21 (533)–24 (610)
25 (635)–36 (914)
25 (635)–36 (914)
37 (940)–38 (965)
49 (1245)–60 (1524)
Boxes
Standard construction has blank ends,
without knockouts.
Front
Concealed hinges standard on fronts.
Double doors supplied when door width
exceeds 24 in. (610 mm). 3-point catch
Depth
Single
Single
Single
Double
Double
Double
0.75 in.
(19 mm)
0.75 in.
(19 mm)
All available with 0.75 in. (19 mm) backboard.
Depth 12 in. (305 mm) or less. Height 72 in. (1829
mm) or less. Specify Mounting – Surface or Flush.
Box width minus 5 in. (127 mm) equals door width.
Conduit Enclosing Shield
(Panel Skirts)
Surface Mounting
Depth
Trim
Overlap
Flush Mounting
Panel Skirts Standard Length
3 Sides Open Back
Sheet metal to cover conduits above
or below a standard panelboard box.
4 Sides Screw Front
8, 9, 10, 11, 12, 14, 17, 18, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44
Table Misc. 2 – Compression Lugs
For Circuit
Breaker Types
Table Misc. 3 – Breaker Mechanical Lugs
Ampere
Rating
Poles
Lugs
Per Kit
Lug Wire
Size
For Use
With Type(s)
Lugs (contains indicated number of lugs and necessary hardware per kit)
ED2, ED4, ED6,
15-125
HED4, HHED6, CED4
QJ2, QJH2, QJ2-H
125-225
F(X)D6-A, HF(X)D6,
125-250
HHF(X)D6, CFD6
JXD2-A, J(X)D6-A,
HJ(X)D6-A, HHJXD6-A,
CJD6, SJD6-A,
200-600
SHJD6-A, SCJD6, L(X)D6-A,
HL(X)D6-A, CLD6, SLD6-A,
SHLD6-A, SCLD6
1,2,3
1
#2/0
2, 3
2, 3
1
1
350 kcmil
350 Kcmil
2, 3
1
500 Kcmil
BQ, BQH,
BQHF, BQE
BQF,
BL, BLH
HBL, HBQ
Switching
Neutrals
BG
BLG
Kits (contains lug and hardware for complete line of load end of 2 or 3 pole breaker)
M(X)D6, HM(X)D6, CMD6,
SMD6, SHMD6, SCMD6
N(X)D6, HN(X)D6, CND6,
SND6, SHND6, SCND6
7-2
500-800
2
3
900-1200 2
3
6
9
8
12
500 Kcmil
500 Kcmil
500 Kcmil
500 Kcmil
BQD
BQD6
Amp
Cables
Rating
Per Lug
Load Side
15-20
1
1
25-35
1
1
40-50
1
1
55-70
1
1
80-100
1
1
110-125
1
1
15-40
1
45-100
1
Lug Wire Range
#14-#10 AWG Cu
#12-#10 AWG Al
#8-#6 AWG Cu
#8-#6 AWG Al
#8-#6 AWG Cu
#8-#4 AWG Al
#8-#4 AWG Cu
#8-#2 AWG Al
#4-#1/0 AWG Cu
#2-#1/0 AWG Al
#2-#1/0 AWG Cu
#1/0-#2/0 AWG Al
#14-#6 AWG Cu
#12-#6 AWG Al
#8-1 AWG Cu
#6-#1/0 AWG Al
7
SECTION
Miscellaneous
Table Misc. 4 – Aluminum Body Lugs for Copper or Aluminum Wire
For Use
With Type
QJ2, QJH2
QJ2H, HQJ2H
All 2&3 pole
ED2, ED4, ED6,
ED6ETI
HED4,
HHED6
CED6, All 1 Pole,
ED, HED
FXD6-A, FD6-A, HFD6,
CFD6, HHFD6
SJD6(A), SHJD6(A),
SCJD6
JXD2(A), JXD6(A),
JD6(A), SJD6(A),
HJD6(A), HHJXD6(A),
HHJD6, SHJD6(A),
CJD6, SCJD6
LXD6(A), LD6(A),
SLD6(A), HLD6(A),
HHLXD6, HHLD6,
SHLD6(A), CLD6, SCLD6
LMD6, LMXD6, HLMD6, HLMXD6, MD6, MXD6, SMD6,
HMD6, HMXD6, SHMD6,
CMD6, SCMD6
ND6, NXD6, SND6,
HND6, HNXD6, SHND6,
CND6, SCND6
Use
Circuit
Breaker
Amp Rating
Cables
Per Lug
60-225
1
15-25
1
30-100
110-125
30-60
70-100
70-250
1
1
1
1
1
1
65-200
1-2
200-400
1-2
3/0-500 Kcmil (Cu)
4/0-500 Kcmil (Al)
250-600
1-2
3/0-500 Kcmil (Cu)
4/0-500 Kcmil (Al)
500-600
1-2
250-500 Kcmil (Cu or Al)
700-800
1-3
1/0-500 Kcmil (Cu or Al)
500-750 Kcmil (Cu or Al)
800-1200
1-4
250-500 Kcmil (Cu or Al)
Lug Wire Range
#6 AWG-300 kcmil (Cu)
#4 AWG-300 Kcmil (Al)
#14-#10 AWG (Cu)
#12-#10 AWG (Al)
#10-#1/0AWG (Cu or Al)
#3-3/0 (Cu)
#1-2/0 (Al)
#10-4 (Cu or Al)
#4-#1/0 (Cu or Al)
#6 AWG-350 Kcmil (Cu)
#4 AWG-350 Kcmil (Al)
#4 AWG-310 Kcmil (Cu or Al)
TA2K500 or TA3K500 only.
Table Misc. 5 – Optional Mechanical Lugs
For Use
With Type
QJ2, QJH2
QJ2H, HQJ2H
ED, HED, 2&3 pole
HFD6, HHFD6
CFD6, F(X)D6-A
J(X)D2(A), J(X)D6(A),
HJD6(A), HHJD6,
SHJD6(A), L(X)D6(A),
HHLD6, SCD6,
HLD6(A), SHLD6(A),
CJD6, CLD6, SCJD6,
SCLD6
SMD6, M(X)D6,
HM(X)D6, HMD6,
CMD6, SCMD6, SND6,
N(X)D6, HN(X)D6,
SHND6, CND6, SCND6
Circuit Breaker
Ampere Rating
Cables
Per Lug
Lug
Material
Lug Wire Range
Quantity per
Catalog Number
60-225
1
Cu
#6 AWG-250 Kcmil (Cu)
1
2-3 pole 30-125
1
Cu
#10-#1/0 (Cu)
70-250
1
Cu
#6 AWG-350 Kcmil (Cu)
3/0-600 Kcmil (Cu)
1
1,2
Cu
3/0-500 Kcmil (Cu)
1
1
Al
500-750 Kcmil (Al)
1
500-600 Kcmil (Cu)
1
#1 AWG-500 Kcmil (Cu)
#1 AWG-350 Kcmil (Cu)
500-750 Kcmil (Cu)
500-750 Kcmil (Al)
500-750 Kcmil(Cu)
500-750 kcmil (Al)
1
1
2
3
2
3
1
250-600
1
500-600
700-800
800-1200
1-2
1-3
1-2
1-2
1-3
Cu
Cu
Al
Al
Al
1
7-3
Miscellaneous
Table Misc. 6 – Miscellaneous Replacement Accessories
Catalog
Number
EGK
BK1
BK4
IMK
11-1824-01
12-1110-01
11-1056-01
NBK3
NBK4
NBK5
NBK6
ECGK
IGK
ICGK
EWK1
QF3
For
Panel Types
P1, P2, P3
as noted
as noted
P1, P2, P3
P1, P2, P3
P1, P2, P3
All
P1, P2, P3
P1, P2, P3
P1, P2, P3
P1, P2, P3
P1, P2, P3
P1, P2, P3
P1, P2, P3
P1
Description
Al Ground Assembly 44 Connections
Bonding Kit for P1 250A Max.
Bonding Kit for SE & P5 400
Interior Adjusting Kit
Directory Card Holder
Directory Card
NEMA Instruction Book
Number Strips 1-42
Number Strips 43-84
Number Strips 85-126
Number Strips 127-168
Cu Ground Bus 44 Connections
Insulated Al Ground Bus
Insulated Cu Ground Bus
End Wall Kit with Knockouts
(20”W x 5.75” DP)
Filler Plate
�
� All 1” QP, BL, BQD and ED Frame Provisions.
Obsolete Panel and Breaker Mounting Kits
Connecting Strap Kits - Obsolete Circuit Breakers
For use with Series 5 or 6 CDP circuit breaker panelboards
Table Misc. 7
Breaker
Frame �
KM, HN
CN
KMB, HNB
SKM
KP, HK
KPB, HKB
SKP, SHK
Strap Kit
Catalog Number
6KM1
6CN1
6KMB1
6SKM1
6KP1
6KPB1
6SKP1
Height
(in.)
10
10
10
10
10
10
10
Table Misc. 9 – Connecting Strap Kits — Vacu-Break
For use with VB-23 and VB-32 Type Panelboards.
Panel
Type
VB-23
VB-32
Catalog
Number
V2AX25
V2BX50
V7AX25
V7BX50
V7EX75
V7FX100
For Use With
Ampere
Rating
30-30
30-30 and 60-60
30-30
30-30 and 60-60
100-100
100
200
200
Unit Height
(in.)
2 1/2
5
2 1/2
5
7 1/2
7 1/2
7 1/2 (2-Pole)
10 (3-Pole)
� These circuit breakers are obsolete, and for the most part, unavailable. Please
replace them with Sentron Series circuit breakers and use mounting strap kits
shown for Sentron breakers.
7-4
FC20, FCI and FCII switchboards – includes copper straps, cover
plates and necessary hardware.
Table Misc. 8 – Blank Plates – Vacu-Break
For use with VB-23, VB-30, VB-32 and Uni-Power Switchboards
Unit
Height
Inches
2 1/2
5
7 1/2
10
12 in. Units - 23 in.
Wide Enclosure Only
Catalog
Number
VB2F025
VB2F050
VB2F075
VB2F100
Table Misc. 10 – Molded Case
Switches (Non-Automatic
Circuit Interrupters)
Ampere
Rating
Breaker
Frame
100
225
250
400
600
800
1200
ED2, ED4, ED6
QJ2
FXD6
JXD2, JXD6
LXD6
MD6
ND6
17 in. Units - 30 in. and
32 in. Wide Enclosures
Catalog
Number
VB7F025
VB7F050
VB7F075
VB7F100