MODEL VM-5Y4 RELAY MODULE UNIT
(CONNECTOR TYPE)
VM-5 SERIES MONITOR
SPECIFICATIONS
Model Code / Additional Spec. Code(
VM-5Y4
Arc suppressor
0
1
Provided
Not provided
Input
1
2
CA Series,CV-86 *1
CV-85,CV-87 *2
VK,RD,FK,MS
VC,VM-11P,VM-21P
Note) *1
*2
-
Contact method
(DANGER)
1
NO
2
NC
No entry if additional
spec. code is not specified.
Contact method
Tropical
Husing fix screw size
CE marking
(OK)
spec.
1
NO
0
#4-40UNC
2
NC
1
M2.6×0.45
2-wire transducer requiring a constant current power supply (4mA, 24VDC).
3-wire transducer requiring a -24VDC power supply, or any other transducer that does not cause
power to be supplied from the monitor to the transducer.
Standard Specifications
I/O CONNECTOR
TERMINAL BLOCK
/TRP/CEM
Contact method
(ALERT)
1
NO
2
NC
)
D-Sub 9P connector 1pc.(CN1)
CN1 : Recorder output 2CH
Alarm output
L : -1 to +1V
H : +4V to +6V
OK, ALERT, DANGER (each 2 points)
Housing fix screw : #4-40UNC or M2.6×0.45
Specified when ordering.
Unless specified otherwise, preset to #4-40UNC.
Recommended connector(Socket side)
Connector
Housing
XM2D-0901
XM2S-0913(#4-40UNC)
XM2S-0911(M2.6×0.45 )
[OMRON]
GM(E)-9F
GM-9LD55GU(#4-40UNC)
GM-9LD55G(M2.6×0.45 )
[HONDA]
Terminal block 16P
Input transducer : 2CH
Contact output : OK 1 point (OR state of CH1 and CH2)
ALERT, DANGER (each 2 points)
Standard Specifications
RELAY POINTS
POWER OUTPUT
FOR TRANSDUCER
CONTACT RATING
(LOAD RESISTANCE)
CONTACT LIFE
PROTECTIVE
CONSTRUCTION
TEMPERATURE
RANGE
MASS
OTHERS
5 points
(DANGER1,ALERT1,DANGER2,ALERT2,OK)
Model Code No. of input signal “1” :
2 wire constant current power supply 4mA,24VDC
Model Code No. of input signal “2” : -24VDC,40mA
250VAC, 5A 30VDC, 5A
100,000 times or more (rated load)
Plastic seal
Operating temperature : 0 to 65°C (32 to 149°F)
Storage temperature
: -30 to +85°C (-22 to +185°F)
Relative humidity
: 20 to 95% (noncondensing)
max.0.4kg
Note) VM-5Y4 RELAY MODULE UNIT can not correspond to isolation recorder output specification.
Alarm contact operation
Monitor alarm relay mode
Monitor power OFF
NO contact NORMALLY DE-ENERGIZED
NO contact NORMALLY ENERGIZED
NC contact NORMALLY DE-ENERGIZED
NC contact NORMALLY ENERGIZED
OPEN
OPEN
CLOSE
CLOSE
Monitor power ON
Normal state Alarm state
OPEN
CLOSE
CLOSE
OPEN
CLOSE
OPEN
OPEN
CLOSE
39624E2.7
Issued : Feb.1997
Revised : Jun.2008
MODEL VM-5Y5
VM-5 SERIES MONITOR
RELAY MODULE UNIT
FOR VIBRATION MONITOR
(CONNECTOR TYPE)
SPECIFICATIONS
Model Code / Additional Spec. Code(
VM-5Y5Arc suppressor
0
1
Provided
Not provided
Input
1
2
CA Series,CV-86 *1
CV-85,CV-87 *2
VK,FK
VC
Note) *1
*2
-
Contact method
(DANGER)
1
NO
2
NC
No entry if additional
spec. code is not specified.
Contact method
Tropical
Husing fix screw size
CE marking
(OK)
spec.
1
NO
0
#4-40UNC
2
NC
1
M2.6×0.45
2-wire transducer requiring a constant current power supply(4mA, 24VDC).
3-wire transducer requiring a -24VDC power supply, or any other transducer that does not cause
power to be supplied from the monitor to the transducer.
Standard Specifications
I/O CONNECTOR
TERMINAL BLOCK
/TRP/CEM
Contact method
(ALERT)
1
NO
2
NC
)
Standard Specifications
D-Sub 9P connector 1pc.(CN1)
CN1 : Buffer output 1CH
Alarm output
L : -1 to +1V
H : 4V to 6V
OK (1 point), ALERT, DANGER (each 2 points)
Housing fix screw : #4-40UNC or M2.6×0.45
Specified when ordering.
Unless specified otherwise, preset to #4-40UNC.
Recommended connector(Socket side)
Connector
Housing
XM2D-0901
XM2S-0913(#4-40UNC)
XM2S-0911(M2.6×0.45 )
[OMRON]
GM(E)-9F
GM-9LD55GU(#4-40UNC)
GM-9LD55G(M2.6×0.45 )
[HONDA]
Terminal block 16P
Input transducer : 1CH
Contact output : OK 1 point
ALERT, DANGER (each 2 points)
Recorder output : 1CH
RELAY POINTS
POWER OUTPUT
FOR TRANSDUCER
CONTACT RATING
(LOAD RESISTANCE)
CONTACT LIFE
PROTECTIVE
CONSTRUCTION
TEMPERATURE
RANGE
MASS
5 points
(DANGER1, ALERT1, DANGER2, ALERT2, OK)
Model Code No. of input signal “1” :
2 wire constant current power supply 4mA, 24VDC
Model Code No. of input signal “2” : -24VDC, 40mA
250VAC, 5A 30VDC, 5A
100,000 times or more (rated load)
Plastic seal
Operating temperature : 0 to 65°C (32 to 149°F)
Storage temperature
: -30 to +85°C (-22 to +185°F)
Relative humidity
: 20 to 95% (noncondensing)
max.0.4kg
OTHERS
Note) VM-5Y5 RELAY MODULE UNIT can not correspond to isolation recorder output specification.
Alarm contact operation
Monitor alarm relay mode
Monitor power OFF
NO contact NORMALLY DE-ENERGIZED
NO contact NORMALLY ENERGIZED
NC contact NORMALLY DE-ENERGIZED
NC contact NORMALLY ENERGIZED
OPEN
OPEN
CLOSE
CLOSE
Monitor power ON
Normal state Alarm state
OPEN
CLOSE
CLOSE
OPEN
CLOSE
OPEN
OPEN
CLOSE
39625E2.8
Issued : Feb.1997
Revised : Sep.2006
MODEL VM-5Y6
VM-5 SERIES MONITOR
RELAY MODULE UNIT
FOR MAGNETIC PICKUP
(CONNECTOR TYPE)
SPECIFICATIONS
Model Code / Additional Spec. Code(
VM-5Y6Arc suppressor
0
1
Provided
Not provided
Input
1
ONO SOKKI
MP-981
0 Contact method
(DANGER)
1
NO
2
NC
No entry if additional
spec. code is not specified.
/TRP/CEM
Contact method
(ALERT)
1
NO
2
NC
Contact method
(OK)
1
NO
2
NC
Standard Specifications
I/O CONNECTOR
TERMINAL BLOCK
)
Husing fix screw size
0
1
Tropical
CE marking.
spec.
#4-40UNC
M2.6×0.45
Standard Specifications
D-Sub 9P connector 1pc(CN1)
CN1 : Recorder output 2CH
Alarm output
L : -1 to +1V
H : 4V to 6V
OK, ALERT, DANGER (each 2 points)
Housing fix screw : #4-40UNC or M2.6×0.45
Specified when ordering.
Unless specified otherwise, preset to #4-40UNC.
Recommended connector(Socket side)
Connector
Housing
XM2D-0901
XM2S-0913(#4-40UNC)
XM2S-0911(M2.6×0.45 )
[OMRON]
GM(E)-9F
GM-9LD55GU(#4-40UNC)
GM-9LD55G(M2.6×0.45 )
[HONDA]
Terminal block 16P
Input transducer: 2CH
Contact output : OK 1 point (OR state of CH1and CH2)
ALERT, DANGER (each 2 points)
RELAY POINTS
POWER OUTPUT
FOR PICKUP
CONTACT RATING
(LOAD RESISTANCE)
CONTACT LIFE
PROTECTIVE
CONSTRUCTION
TEMPERATURE
RANGE
MASS
OTHERS
5opints (DANGER1, ALERT1, DANGER2, ALERT2, OK)
12VDC, 40mA
250VAC,5A
30VDC,5A
100,000 times or more (rated load)
Plastic seal
Operating temperature : 0 to 65°C (32 to 149°F)
Storage temperature
: -30 to +85°C (-22 to +185°F)
Relative humidity
: 20 to 95% (noncondensing)
max.0.4kg
Note) VM-5Y6 RELAY MODULE UNIT can not correspond to isolation recorder output specification.
Alarm contact operation
Monitor alarm relay mode
Monitor power OFF
NO contact NORMALLY DE-ENERGIZED
NO contact NORMALLY ENERGIZED
NC contact NORMALLY DE-ENERGIZED
NC contact NORMALLY ENERGIZED
OPEN
OPEN
CLOSE
CLOSE
Monitor power ON
Normal state Alarm state
OPEN
CLOSE
CLOSE
OPEN
CLOSE
OPEN
OPEN
CLOSE
39626E1.5
Issued : Jul.1997
Revised : Sep.2003