24V POWER SUPPLY
Designed as standard in DC24v, these power supplies have a
maximum load of 60w, 150w or 200w.
Manufactured to an IP67 rating, these power supplies are sealed
for waterproof and moisture-proof and are suitable for both
internal and external environments.
The product is equipped with input and output connected wires.
The terminal marked Input is the input terminal of the power
supply and should be connected with the corresponding AC
power. The terminal marked Output is the output terminal and
should be connected with the corresponding LED lamps.
150w/200w
The power supply has built-in over-current and short-circuits
protection. In case of short-circuits or overload, the product will
conduct automatic protection.
Model
Input
TRY-CL-PSU-60W
Voltage Range
Output
Protection
Environment
Voltage Resistance
Others
TRY-CL-PSU-200W
1750-250VAC
Frequency Range
Input Power
TRY-CL-PSU-150W
50-60 Hz
<65W
<185W
Inrush Current
Cold start: 40A/230V AC
Leakage Current
<75mA/240VAC
DCVoltage
<250W
24V
Rated Current
2.5A
6.25A
8.33A
Rated Power
60W
150W
200W
Ripple and Noise
<600mVp-p
Hold Up Time
<2s
Over Loading
120 - 150%
Short Circuit
Protection type: Hiccup Mode, recovers automatically after condition is removed
High Temp
100º (Shut down, re-power on to recover)
Working Temp
-25º – +40ºC
Storage Temperature
-40ºC - +60ºC
Input - Output
AC 1.5KV/5mA 5s
Input Housing
AC 1.5KV/5mA 5s
IP Rating
IP67
Dimension
L199 x W66 x H52mm
L238xW131 x H60mm
L238xW131 x H60mm
Weight
1.3kgs
2.9kgs
2.9kgs
Part Number
24v 60w – TRY-CL-PSU-60W
24v 100w – TRY-CL-PSU-100W
24v 150w – TRY-CL-PSU-150W
24v 200w – TRY-CL-PSU-200W
As part of our continuous product development we reserve the right to
amend these specifications without prior notice.
CONSTANT CURRENT
LED DRIVERS
The Tryka Constant Voltage power supplies
have been designed to run either our FLEX30
or FLEX60 Flexistrip, LineLight or Covelight at
either 12V and 24V based upon supply.
60w