CE+T Alto Modular Inverter

advertisement
TSI ALTO
www.cet-power.com
20-480
kVA
TELECOM
DATACOM
MASS TRANSIT
OIL & GAS
POWER UTILITIES
MODULAR
INVERTER
POWER 20 kVA - 16 kW
INPUT 48 Vdc
OUTPUT 3x400 Vac + N
DESCRIPTION
ALTO is a compact and scalable modular inverter providing
a pure sine wave AC supply.Leveraging the existing DC
Power system, it provides an excellent high power AC
backup solution. It uses the latest inverter technology,
providing superior energy efficiency in a compact size.
The “Twin Sine Innovation” (TSI) technology eliminates all
single points of failure with full scalability; up to 32 modules
in parallel and high efficiency of up to 96% reducing
operating costs.
APPLICATIONS
All high power business critical applications and all types
of AC loads. The design is modular and scalable with hotswappable inverter modules which ensures low Mean Time
to Repair (MTTR), reduction in service costs and meets the
changing needs for future expansion.
MAIN FEATURES
ual input sources (AC & DC) with wide AC input
D
range 150 Vac to 265 Vac
High efficiency
Transfer time reduced to 0
20kVA in 3 U
up to 120 kVA per cabinet
www.cet-power.com
TSI ALTO
48 / 230
GENERAL
EN 61000-4-2 / EN 61000-4-3 / EN 61000-4-4 / EN 61000-4-5 / EN 61000-4-6 / EN 61000-4-8
EMC (immunity)
EN 55022 (A)
EMC (emission) (class)
Safety
IEC 60950-1 / EN 62040-1
MTBF
> 200 000 hrs (MIL-217-F)
Forced / Doubled
Cooling / Isolation
Efficiency (Typical): Enhanced power conversion / on line
Dielectric strength DC/AC
True Redundant Systems – compliant
RoHS
96% / 93%
4300 Vdc
3 disconnection levels on AC out and DC in power ports
4 disconnection levels on AC in port
Compliant
GR63 office vibration 0 to 100 hz-0.1 g / transport vibration 5-100 Hz 0.5 g 100 to 500 hz-1.5 g / Drop test
Vibration
Self adaptive to wide operating conditions and comprehensive table of troubleshooting codes
Operating conditions
Altitude above sea without de-rating
Ambient / storage temperature / relative humidity
Material (casing)
AC OUTPUT POWER
< 1500 m / derating > 1500 m – 0.8 % per 100 m
-20 to 40 ° C / -40 to 70 ° C / 95 %, non-condensing
Coated steel-ALU ZINC
Per module 20 kVA-16 kW / Per cabinet 120 kVA-96 kW
Nominal Output power (VA) / (W)
max 130% 15 s
Short time overload capacity
Full power rating from 0 inductive to 0 capacitive
Admissible load power factor
Internal temperature management and switch off
DC INPUT SPECIFICATIONS
Yes
48 Vdc
Nominal voltage (DC)
40 - 60 Vdc
Voltage range (DC)
Nominal current (at 40 Vdc and 14,5 kW output per module)
Maximum input current (for 15 second)
Voltage ripple (resistive load 54 Vdc)
Input voltage boundaries
AC INPUT SPECIFICATIONS
385 A per module / 3x770 A per cabinet (6 modules) 2 modules per DC feed
500 A per module - 3x1000 A per cabinet (6 modules) 2 modules per DC feed
< 2 mV
User selectable
3x400 Vac + N
Nominal voltage (AC)
150 Vac – 270 Vac phase to neutral with derating
Voltage range (AC)
Adjustable
Conformity range
> 99%
Power factor
Frequency range (selectable) / synchronization range
AC OUTPUT SPECIFICATIONS
50Hz - 60Hz / Ajustable : 30Hz to 70 Hz synchronization range
3x400 Vac + N
Nominal voltage (AC*)
50 - 60 Hz / 0.03 %
Frequency / frequency accuracy
Total harmonic distortion (resistive load)
Load impact recovery time
< 1.5 %
< 0,5 s
20 to 40 s
Turn on delay
Nominal current. Protected against reverse current
Crest factor at nominal power
With short circuit management and protection
Short circuit clear up capacity
IN TRANSFER PERFORMANCE
Max. voltage interruption / total transient voltage duration (max)
SIGNALING & SUPERVISION
28.9 A per phase per module / 175 A per cabinet
3:1
60 A per phase during 10 ms per module
0s/0s
Synoptic LED
Display
Dry contacts on T4S / MODBUS, TCP-IP, SNMP
Alarms output / supervision
On terminal in the cabinet
Remote on / off
532 /
571 mm
*Operation within lower voltage
networks leads to de-rating of
power performances.
3U
28 kg
565 mm / 23"
Download