Sabro
PACKAGED
ENVIRONMENTAL
UNIT
DIESEL FURNACE HEATING
WITH
EVAPORATIVE COOLING
Evaporative Cooling
Evaporative pad 85% efficiency.
Reduces DX/chilled water cooling requirements for fresh air.
Cuts mechanical cooling costs 25% to 65%.
Provides 100% make-up air cooling at half the cost of mechanical equip cooling
increases heat exchanger life.
Brings in outside air and exhausts stale air, smoke, odors, and germs.
Helps maintain natural humidity levels, which benefits both people and furniture
and cuts static electricity.
Does not need an air-tight structure for maximum efficiency, so building occupants can open doors
and windows.
Optional
Mechanical cooling by adding DX coil & Compressors.
www.sabro.com.pk
Sabro
PACKAGED
ENVIRONMENTAL
UNIT
Diesel Furnace Heating
DIESEL FURNACE HEATING
WITH
EVAPORATIVE COOLING
Normally the heat exchangers are capable to rise the air temperature to 32ºC (95ºF)
There special designs do not permit the combustion gas to mix in the air and all the
time healthy air is supplied to the room.
Indirect fired heating technology is the most economical than any other heating option
such as electric heating and heat pump equipment.
SPECIFICATION
Model Number
ECS6000 + DAF400
Standard Air Flow Rate
External Static Pressure
Furnace Input Capacity
Furnace Output Capacity
Furnace Efficiency
Furnace Fuel
Diesel Oil Grade
5700 CFM (9685 CUM/Hr)
1.0 In WG (250 Pa)
350000 BTU/Hr (103KW)
280000 BTU/Hr (82KW)
80 – 82%
Diesel Oil
Grade B For Ambient Temperature Above
0C (Normal Diesel Oil)
Grade F For Ambient Temperature Below 0C
Not Less Then -15C.(Winterized Diesel Oil)
-10C To + 70C.
1.8 – 12mm/S
6 – 10 Litter/Hr
68F (20C)
113F (45C)
45F (25C)
Atomizing Gun Type
Provided Optional
220 – 1 – 50Hz
95F DB/75F WV (35CD/24CWB)
Oil Temperature At Burner Inlet
Oil Viscosity
Fuel Consumption
Entering Air Temperature Furnace
Supply Air Temperature Furnace
Furnace Temperature Rise
Burner Type
Burner With Pre Heater
Burner Voltage Supply
Min Evaporative Cooling Design
Temperatures
Evaporative Cooling Capacity
Evaporation Efficiency
Evaporation Rate
Air Circulating Fan Type
Fan Drive Type
Fan Motor HP/KW
Fan Motor Voltage
Altitude
100800 BTU/Hr (8.4 Tons)
80 – 82%
0.19 Gallon/S-Min(11.4 Gallon /Hr)
Forward Curved Centrifugal DWDI
Belt Drive
5 Hp / 3.7KW
380 – 415-3-50Hz
500 Feet (150meters)
www.sabro.com.pk